|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Aspire Biesse post processor8/8/15
I need to find a post processor for aspire to run a Biesse Klever. I think it can be done but it's out of my skill set. If anyone can help I would really appreciate it.
Have you Contacted Vectric,, There was a problem with the Biesses PP and I am not sure it has been corrected
They provide Hundreds of PP included with the software
Here is where these are discussed, (you may have to join the forum
The Klever is listed under current PP available which Version are you using, is it a licensed version ?
Vetrics told me that Biesse doesn't want to help them and won't write a post for them. They have one listed for my machine and it won't work.
At this point I am thinking of using enroute instead.
if you want ,i can write to you
I had known Biesse had been Difficult for the Machine owners Who wanted to use Aspire,
My name is Cesare Magnani and I am the Brand Sales Manager for the Biesse CNC in North America.
as i know Aspire not suport 5 axiss
As far as I know, you can not run a program posted by aspire in Biesseworks. The post that I have been using is ISO code run from the older "blue screen" editor. If this has changed, I would love some info :)