Northwood Parameters
10/3/18
I have a Northwood with a euro spindle which crapped out. I have a replacement HSD 30 taper which I have mounted and am working through the wiring diagrams to connect. I am hooking it to a Yaskawa 506-p5 drive an I need any help with parameters for this combination. Any ideas?
10/3/18 #3: Northwood Parameters ...
Weren't you able to reach out to Northwood for support?
10/3/18 #4: Northwood Parameters ...
I have 2 Eurospindles that I removed from an older Northwood router that I took out of service. Not sure if these would work for you or not. feel free to respond if your interested.
10/11/18 #5: Northwood Parameters ...
So here is the update.The machine is still down. Northwood has quoted over 23,000.00 to provide one spindle replacement for this 15 year old machine. To add insult to injury a former employee purchased two new spindles that they recommended for use on this machine 4 years ago. I have the corrected drive cables and plates to mount and now Northwood has sent me a quote for 5800.00 to email me the logic for the spindle they recommended which has 3 sensors instead of four which was original. So I'm a hostage. My company will probably purchase three CNCS this next year and we will not be purchasing from companies who practice like this.