Drower frontage assembly
2/20/22
Hello all i own a cnc and i was looking for a new way to assemble my drower frontage to the drawer
Any one use dowels for that
2/21/22 #2: Drower frontage assembly ...
Depending on what software you use, you can pop 4mm holes in your drawer box front that line up with 20mm cups drilled for tap-in drawer front adjusters in your drawer front. The 8x32 machine screws fit nicely in a 4mm hole.
2/21/22 #3: Drower frontage assembly ...
Thank you for your reply
I use polyboard for my cabinet work
2/22/22 #4: Drower frontage assembly ...
I use the drawer front adjusters a lot that Jared mentions. They are very handy when you need fine adjustment. Added cost but when you need them, and the speed, the cost gets offset pretty quick for a small shop.
2/22/22 #5: Drower frontage assembly ...
Thank you
If possible may i get a picture of that product or a link
2/22/22 #6: Drower frontage assembly ...
Google Blum 295.1000 drawer front adjuster and you'll find it. Or an alternative, since Blum is not being nice to their customers lately.
2/22/22 #7: Drower frontage assembly ...
Amen to that.
I won't say I won't use Blum again, ever, but they are now a vendor of last resort.
I've been jerked off since the end of September on slides after stocking a 3 month inventory (200-300 slides) for years.
Frustrating thing is, they won't give any update or vague idea of delivery.
Impossible to operate a business on that information.
I'm done.