Forestry

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Teak Talk

7/20/13       
Jim Baldwin  Member

Website: http://www.handrailer.com

I recently broke down and bought a couple of teak boards and paid more than $300.00! (I own a boat so I've already lost my mine). Of course the boards were plantation lumber which doesn't look quite like the Burma teak I'm replacing (grumble, grumble).

I recently visited the WW ll battleship Iowa, berthed in Long Beach, CA. Her dilapidated teak decks are currently being replaced piecemeal, as funding and materials permit.

I was amazed at the immense size of the vessel and the literal mountains of 2" teak required to sheath her steel decks. I can't begin to fathom the required cost today to complete the work.

I little research into the former widespread use of teak, also shocked the holy-hell out of me. It seems every navy, commercial ship and yacht in the world used to have teak decks. The British even sandwiched teak planking into the hulls of their war ships in a futile effort to reinforce them against torpedoes? Yachts and fishing vessels of all sorts constructed in the Far East, were often built entirely of teak. Imagine all the decks of all the combined aircraft carrier forces of the world, overlaid in 2" teak!

I guess I know now why I paid a fortune for a couple of boards. It is a sad story and only getting sadder. Is there anything positive in all this? Is there anything that anyone can say that might cheer me up? Have we really cut down all the teak forests of the world and sunk the lot into the sea?

I feel sick

7/21/13       #3: Teak Talk ...
David R Sochar Member

Website: http://www.acornwoodworks.com

I used to work with an older draftsman that served on an aircraft carrier in WWII. He was stationed in the woodshop, a fully equipped mill that worked Teak into 4" planks for the main and other decks on the ship. If there was a fire or crash, the damaged deck would be replaced, on the go, so to speak.

4" thick Teak flight decks - how many board feet is that??

He mentioned the difficulty in milling the teak with only steel tooling, and how the grinderman was always busy.

The amount of Teak that went into the shipping industry is amazing - probably beyond estimation. One wonders what else disappeared as those forests were cut.

Here in the US, before we were the US, the English had marked the tall Pines of the Northeast and the Live Oak in the coastal South as crucial for their ship builders. Hence the phrase "Kingswood" - to keep the poachers out. Another reason the English fought so hard to keep the colonies. They also had Burma at the time, as well as other lumber producing areas.

Going back even further, the various Mediterranean seafaring cultures used their resources to build ships and rule the waves, until their trees were gone. Cyprus, Syria, Greece, Italy.... all had their turn while the trees were available.

All are now largely deforested.

7/21/13       #4: Teak Talk ...
Jim Baldwin  Member

Website: http://www.handrailer.com

You left out Easter Island, a sub-tropical island once covered with millions of palm trees and a thriving native population. When the Europeans arrived there were no trees over 10 feet tall and only a few starving natives.

Gigantic stone heads (Moai) still stand, staring out to sea, as if looking, pleading for help. Some of the natives, in bitter remorse, were in the process of knocking them over but there weren't enough left alive to accomplish the task.

Have we learned nothing?

7/22/13       #5: Teak Talk ...
David R Sochar Member

Website: http://www.acornwoodworks.com

Learned anything?

It seems I recall hearing about the Hawaiian Islanders destroying Sandalwood trees in an attempt to drive the Jesuit-led Europeans from the islands. Upon seeing the islanders living a fine life, the Europeans pronounced them lazy, and then put them to work harvesting sandalwood for export. The destruction of the trees was a desperate move seen as the only way to rid themselves of the European pestilence.

Not only trees, but people get exploited.

7/22/13       #6: Teak Talk ...
Jim Baldwin  Member

Website: http://www.handrailer.com

There is no viable substitute for teak. Perhaps the plantations may someday restore some of the former supply but it's going to be a while... Government or corporations also need to to plant and restore forests which are not intended to be harvested for a lifetime or more.

As in all natural resources, everything now requires micro-management if we are to sustain the ecology and ourselves. The time of harvesting without planting has past.

All this has come to a head within the last few decades. My boat (built in 1976) has a solid timber, 6X6 teak bowsprit along with substantial amounts of teak trim and hatch-work. The interior is all teak. This boat was only one in a production-line and one model in dozens that were mass-produced by the thousands. The bowsprit was painted white by the factory and never even intended as part of the bright work.

I can get real emotional about this stuff as I consider the destruction of our global ecosystem, more life threatening than all our Geo-political problems combined.

7/26/13       #7: Teak Talk ...
Richard

Its funny (to me ) that this post appears today. i pulled into my drive last night with a trailer load of teak and mahogany from a 50' boat built in 1960. The boat is being torn down because it was abandoned in a boatyard and the boatyard owner wants it gone.The teak is 3/4 thickness. The mahogany is Honduran. I will have to learn the art of plugging to use a lot of this stuff but it has yielded a lot of beautiful wood.

8/28/13       #8: Teak Talk ...
Dave Boyt

I thought the original poster was looking for a cheering-up. Now I'm depressed. Richard made a good point about salvaging the lumber. I mill salvaged logs almost exclusively, and have friends who have recovered some beautiful chestnut from old barns that were being torn down. If I lived on the coast, I would look into salvaging teak from old ships.

8/28/13       #9: Teak Talk ...
David R Sochar Member

Website: http://www.acornwoodworks.com

I once turned down an offer to salvage a teak storage tank made of 4" x 6" t&g boards stood on end, with metal bands to hold in place. 16' deep.

Why? Well, it was made and used for storing hog pancreas for manufacture of insulin by a local pharmaceutical company. Used for 25 years. The chemicals were not disclosed, but I could not picture it being anything enjoyable.


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)