Solid Wood Machining

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Post a Response
The staff at WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at any WOODWEB Forum. Participants should undertake the use of machinery, materials and methods discussed after considerate evaluation, and at their own risk.
Your Name:
Your Website:
Email Address:
Subject: Re: Shaper w/ tenon tooling vs Single End Tenoner

Message:

(read message guidelines).
Note: Do not use the below fields to advertise your business - only for links related to the discussion.
Thread Related Link URL:
Thread Related Link Title:
  To "point" to an image (picture) from another website, provide the URL (Web Address) of the file ( include ONE reference to http:// )
Thread Related Image URL:

Date of your Birth:

Upload a Thread Related File:
File Types: Image (gif-jpg-png-bmp), PDF, Sketchup, Video (mov avi wmv mpeg mpg mp4 ogg). (Image Upload Tips)

I have read the Site User Agreement and agree with the Terms

  <= Check to receive e-mail notification of responses

Message Thread:

Shaper w/ tenon tooling vs Single End Tenoner

5/19/23       
correy

I have a T130NPS , cast slider. I have opportunity to buy a Heian tenoner. A heavy Japanese make.
With all the newer options for shaper tooling I am unsure if a tenoner has a huge advantage over a sliding spindle moulder.
I am open to having my mind changed on that. I have never used a tenoner. The T130 does a pretty good job.
The things I do not like in regardless to shaper tenoning is it seems there requires a fair bit of force to push the part thru when making relatively deep cuts. 3"+. It not surprising as its a lot of wood.
I am assuming, (uhoh) that because the cheeks are cross grain cut, there is a substantial reduction in effort to push the part thru.
My shop is small, 2400 sqft. I do like the shaper because it can do more than just cut tenons. But I DO like old Japanese cast machines lol. And might make some space for it if a consensus might show that there are some real advantages to owning a dedicated tenoner.
Thanks for any thoughts or insights in to this.

5/22/23       #2: Shaper w/ tenon tooling vs Single E ...
David R Sochar Member

A tenoner has several advantages. It will have a heavier table to carry the parts. The heavier table will be larger to do angled parts. The fence will be heavier, as will the clamping.
Some tenoners have two horizontal heads for sizing the tenon, and then two vertical spindles for the copes.
I had a T130 with a bolt-on tenon table. It had good bearings and a firm action, but was too small to ever get much use in our shop. We used a Powermatic 2-A two spindle tenoner to rough size the tenons, and final sized and coped on the Scmi, with a shop made aluminum sled. I finally bought a dedicated tenoner, but it is not hooked up yet.

5/22/23       #3: Shaper w/ tenon tooling vs Single E ...
correy

Hi Dave thanks for your thoughts. The intergrated t130 table is pretty stout for sure. I have the tenoning plate that raises the table about 30mm. But as you say mitered tenons doesn't fit the table well. I have been just using the miter gauge directly on the sliding table for that. Mitered are a bit of humbg because you need to flip heads and fence to do the opposing end. Way too much set up for my taste. Not that it seems it would be different on a tenoner.
The T130 will do entry door size rails fine enough.
I guess my recent revelation is that most people are using 2 sets ups to cut tenons. Like you offer that you rough them out then cut to dimension. This is what I want to avoid.

I have been cutting shoulders on the slide saw, then cheeks on the T130. My grooving tooling I use for tenons doesn't produce the clean shoulder that a cross cut blade can produce. I suppose I could rough the cheeks on the bandsaw.

What tooling are you using on the T130? I might be better off investing in better tooling and an outrigger table with support arm than a tenoner.

5/22/23       #4: Shaper w/ tenon tooling vs Single E ...
David R Sochar Member

We are using tenon and cope discs at about 8” diameter for max tenon length of 3”. We can do 1-3/4” thick rails in one go. It is the 2-1/4” thick that are just too much for the shaper to do in one pass. I suspect it is the weight of the discs that factors into ability; they are are heavy. Spindles on the large OD machines are 2” or mm equal, giving rigidity to those discs.

That is another benefit of a tenoner with large capacity discs or separate cope spindles - longer tenons. Aluminum discs also help fight the weight battle. I have never had a failure of any M&T joint at or about 3” long, but then, I may not have gotten a call.


View higher quality, full size image (4032 X 3024)

5/24/23       #5: Shaper w/ tenon tooling vs Single E ...
Joe Calhoon Member

Correy, I have quite a bit of experience using shapers for tenoning and also European tenoners that are a little different than old iron US tenoners in that they usually don’t have the horizontal heads. I think the biggest advantage a tenoner with horizontal heads has is the ability to do long tenons. With my 320mm diameter disks I can do about 4 1/4” deep tenons which is usually enough.
Those Heian tenoners are my favorite of the old iron machines and would buy one myself if the right deal came up. Wadkin would be my second choice. I would leave it setup for square edge tenon work and not bother with the cope spindles.
Tenoning on shapers with the large disks is better done on the side mount table type. I had a few in table sliding shapers and never cared much for them. The side mount tables will take quite a bit of weight. I have a Panhans bolt on sliding table and find that one works well also. Its limitations are long lengths.
If you tenon on shapers you would be better off to buy European manufactured tooling. They have been doing this for many years on shapers and tenoners and the tooling is designed for it. It’s costly though and an old Iron tenoner will be less expensive to tool up but the setup and change over will be more labor intensive. Depends a lot on what you make.
I don’t have any trouble cutting tenons in one pass for windows and most doors. The exception would be wide white oak door rails on the vintage Martin shaper that is only 6 1/2 hp. The 10 and 13 hp shapers do just fine in all materials.
For angle cuts the newer Martin sliding tables tilt both directions past 60 degrees. The Hofmann and Vintage Martin will go both ways to 45 but awkward to set in the opposite direction. You will definitely feel back pressure going against the grain tenoning on a shaper. The Soukup CNC tenoner was pretty slick for angle tenoning and slotting with length compensation built in to the controller.


View higher quality, full size image (1280 X 960)


View higher quality, full size image (960 X 1280)


View higher quality, full size image (1280 X 960)

 

Buy & Sell Exchanges | Forums | Galleries | Site Map

FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Sponsors

    Become a Sponsor today!