Safety Speed Cut Thermwood Corporation ECabinet Systems
Post a Response Subscribe Guidelines

Cabinetmaking

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Salice restricter clip for 110 degree soft close hinge

12/13/23       
Al

I’ve used these before but Hafele has them listed for 105 degree not 110 degree. Frameless style hinge with soft close. Need item number.
Thanks,
Al

12/14/23       #2: Salice restricter clip for 110 degr ...
Dennis Bean  Member

Website: http://www.saliceamerica.com

Hi Al,

The same clip is used for both the 105 degree and the 110 degree Silentia+ hinges. It limits the angle to 86 degrees.

Item: S1E637XY

Regards,

Dennis bean
Salice America

12/14/23       #3: Salice restricter clip for 110 degr ...
Dennis Bean  Member

Website: http://www.saliceamerica.com

This is the clip.


View higher quality, full size image (484 X 415)

12/14/23       #4: Salice restricter clip for 110 degr ...
Al

Thanks always Dennis.

12/14/23       #5: Salice restricter clip for 110 degr ...
Al

Dennis,
Hafele seems to be out of the 110 soft close hinge with dowels. They only have screw on version. This situation is last couple of times I have ordered. Is there by chance a shortage of the ones with dowels? I always thought these were the most common.

12/14/23       #6: Salice restricter clip for 110 degr ...
Dennis Bean  Member

Website: http://www.saliceamerica.com

Doesn't sound right.

Is this the item number you are using?

C7R6AE9 = 110 degree, full overlay, soft close with dowels

12/14/23       #7: Salice restricter clip for 110 degr ...
Al

I just ordered the screw on but nothing with dowels. I ordered just what I needed but for future I would like the ones with dowels. They don’t seem to carry them. Might be worth checking into this.
Thanks

12/14/23       #8: Salice restricter clip for 110 degr ...
Dennis Bean  Member

Website: http://www.saliceamerica.com

Al,

Here are the Hafele item numbers. They have plenty of the doweled version in stock.

Dennis


View higher quality, full size image (644 X 205)

12/14/23       #9: Salice restricter clip for 110 degr ...
Al

I just ordered the screw on but nothing with dowels. I ordered just what I needed but for future I would like the ones with dowels. They don’t seem to carry them. Might be worth checking into this.
Thanks

12/14/23       #10: Salice restricter clip for 110 degr ...
Dennis Bean  Member

Website: http://www.saliceamerica.com

They have 20,000 in stock with dowels. Please see my previous reply with the Hafele part numbers

12/14/23       #11: Salice restricter clip for 110 degr ...
Al

That number works. Don’t need 20,000 just 19,750!

Thanks Dennis

12/20/23       #12: Salice restricter clip for 110 degr ...
Scott Markwood

Thanks for providing excellent info as always, Dennis. BTW, the Hafele part number for the Salice S1E637XY clip is 329.24.501

Also, thanks for sharing the info about our doweled hinge inventory. We typically have plenty on hand and always more on the way, so if someone is seeing otherwise, they might want to give customer service a call. We have over 50 customer service reps trained and ready to serve.

12/20/23       #13: Salice restricter clip for 110 degr ...
Dennis Bean  Member

Website: http://www.saliceamerica.com

Hi Scott,

Karen helped me with the details. Merry Christmas

12/20/23       #14: Salice restricter clip for 110 degr ...
Al

Scott,
I didn’t have number on hand. I typed in Salice soft close hinge 110 degree at top of page. It took me to the 110 soft close. There were four or five to choose from. The doweled ones were in faded print not in bold print. It would not let me order them. After Dennis gave me the number I typed that in and they came up. I called customer service and she said they would look into this glitch. I had the same problem in early summer.
If the A book is available I would like one, it had most of the products I use but my current copy is pre Covid.

12/21/23       #15: Salice restricter clip for 110 degr ...
Scott Markwood

Al, I totally understand. I'm not sure where we stand on A Books, but since they traditionally contain pricing, they are only distributed by our reps, so if you have a Hafele rep, reach out to them. If you don't have a Hafele rep, let customer service know and they'll connect you to a regional manager who can help you out. BTW, it's important to note that all of our reps are employees of Hafele America Co. and should be up to speed on all our catalogs and website details.


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
    • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!
    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)



    • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Limtech Industries, Inc. Lamello
    Related Information:
    Product Directory
    Knowledge Base: Cabinetmaking
    Shop Gallery

    Recent Threads at all Forums

    Today's Sponsors
    • MARTIN Woodworking Machines Corp.
      Quality Woodworking Machinery Engineered and Manufactured in Germany
    • Vexor Custom Woodworking Tools, Inc.
      Custom and Standard Router Bits, Shaper Cutters, Profile Knives, Multi Profile Insert Tooling and More
    • Shop Gear Inc.
      Distributor of Co-matic Power Feeders, Le-matic Portable Edgebanders, and Supplier of Woodworking Machinery, Tooling and Accessories in North America
    • GreCon
      Spark Detection and Extinguishment Systems and Quality Assurance Measuring Equipment
    • TotalFinishingSUPPLIES.com
      Solutions and supplies from spray tips to spray booths for all your woodworking needs
    • WalzCraft
      Custom Doors and Wood Products
    • Scarlett Machinery Inc.
      New and Used CNC Routers and Used Woodworking Machinery, for Operations Ranging From Small Woodworking Shops to Large Progressive Manufacturing Plants
    • WOODWEB, Inc.
      The Information Resource for the Woodworking Industries
    • American Vision Cabinets
      Leading provider of Custom CNC cabinet parts and components and Edge banding services
    • J&P Machines
      Design and Production of Custom Equipment for the Manufacturing Industry
    • Safety Speed Manufacturing
      Economical Vertical Panel Saws, Panel Routers, Edgebanders and Widebelt Sanders
    • Rangate
      Woodworking Machinery, Supplies and Knowledge
    • O'Shea Lumber Company
      Merchants of Fine Woods

    Become a Sponsor today!