RT Machine Co Anver Laguna
Post a Response Subscribe Guidelines

CNC

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

CNC Purchase

6/19/23       
Andrew Prather Member

Website: http://www.joryworkshop.com

Hello,

We are looking to finally get a CNC into our small mom and pa shop. Right now we are currently building and installing about one or less high-end kitchen a month. We are looking to get a capable accurate CNC machine that can handle panel processing with out over doing it. I have been looking at several machines and have narrowed it down to a couple machines the CNC Factory Viper and DMS Freedom. The price is and options on the CNC Factory Viper is very attractive but feel like the DMS might be more reliable. If anyone has experience or knowledge of either machines I would like get others perspective.

6/20/23       #2: CNC Purchase ...
Tom Gardiner

Twelve years with a 4 x 8 Patriot without an issue. Well built, timely delivery, reliable. You can buy cheaper machines I'm sure but to me having zero down time is worth the extra dollars.

6/20/23       #3: CNC Purchase ...
james e mcgrew  Member

Website: mcgrewwoodwork.com
 Dang that is some nice work ! A CNC will make a difference , I made the step to a first machine in 07, single Z machine and soon learned why I needed a CNC. I have had several since the first one and there are some good choices on the market. We have grown to need two machines, I have a CAMaster Cobra atc 508 that is 12 years old and is used daily, Camaster provides a forum for its thousands of Owners, Feel free to join and meet some owners see machines and some are sold in the For sale section when owners step up to newer machines. the web address for the CAMheads forum is wwwdotcamheadsdotorg .
My second machine is a Chinese Sudaio The Viper you are interested in is also imported, I paid right at 50 k for the sudaio and it needs a good bit of floor space as it has an on loader off loader , ATC and drill bank (Man do I love the Drill bank), Best advice is to go see machines, Feel free to come see mine. we were a smaller shop which grew as a result of the CNC, Go see factorys. Camaster is in Georgia above Atlanta. they are always good for a factory tour and are one of the very few machines Built from the ground up in the USA, Dang things are built like Harleys. Any way feel free to call my number is on contact page of my website. good luck go slow study. You can buy a ship anchor in a short minute and you do not want that. my email is mcgrewsixthreesixatmsndotcom
6/21/23       #4: CNC Purchase ...
Karl E Brogger  Member

Website: http://www.sogncabinets.com

When I was shopping for a router, I was looking at Anderson, Biesse, and Weeke.

I don't think I'd entertain anything outside of those three with the intent of producing revenue. Some of that is based on my geography and the service and techs that are available semi-locally.

6/22/23       #5: CNC Purchase ...
Dropout Member

If you're halfway mechanically inclined buy a 10 or 15 year old Anderson or Komo. Good phone and email tech support for both of them. Most parts can be had from local sources. The problem I see with Biesse (have had 4 of them) and Weeke (not had one) is proprietary controls, where the ANDI and Komo that I have/had use Fanuc controls which are easily serviced.

6/23/23       #6: CNC Purchase ...
Karl E Brogger  Member

Website: http://www.sogncabinets.com

Dropout, after having a cnc that operates in an environment rather than being a straight gcode machine, I'm not sure I would do it another way.
I don't view the proprietary controller as a negative, so long as those companies still exist.

You're gonna crash it sooner or later. The question is, do you benefit from doing your job and paying a tech to do theirs. Or, by not doing your job, and doing the technician's job?

I've done both. Depends on the scenario which is the stronger choice

6/25/23       #7: CNC Purchase ...
Derrek

Website: http://Closetdr.com

Couple of things.
CNC is a long term purchase and will last 5-10 years if you buy right. Don’t buy for just what you need today but what the future holds.
Ask for references of people that have owned machine for more than 1 year. Someone that has had one for only a couple months, even if they haven’t had a great experience won’t necessarily give you the truth as nobody wants to admit they made a bad purchase.
I’m a fan of the Anderson machines and like the Fanuc controllers.
I believe the most important features on a CNC for a cabinet shop is having a drill block and the ability of machine to push off parts, even if you don’t purchase conveyor at beginning that you can easily add after. These 2 things make quick work of sheets and pay for themselves quickly with the time savings.
I’ll be in Vegas next month at show and glad to meet with anyone looking at machines.

Anderson Spectrum

6/28/23       #8: CNC Purchase ...
Erick Member

Website: https://virmer.com

What country are you in? If in Europe, I can recommend Wattsan machines available from Virmer. I have been working with these machines for many years and I can say that I haven't seen such reliable and powerful equipment in a long time.

https://virmer.com/catalog/laser-machines/

6/28/23       #9: CNC Purchase ...
Erick Member

Website: https://virmer.com

You are correct in assuming that the spindle rotation direction can affect the thread direction when using a left-handed tool holder on a CNC machine.

When cutting threads, the tool rotation direction should match the desired thread direction. For example, if you want to cut a right-handed thread, the tool should rotate in a clockwise direction. Conversely, if you want to cut a left-handed thread, the tool should rotate counterclockwise.

To achieve the desired thread direction, you may need to adjust the spindle rotation direction on your CNC machine. This can typically be done through the machine's control panel or programming software. By changing the spindle rotation direction, you can align it with the thread direction required by the left-handed tool holder.

https://virmer.com/catalog/laser-machines/

6/28/23       #10: CNC Purchase ...
Jimmy

Dropout, many thanx, i connected the Chevy and was able to reach out to Marek for the post processor and Alpha help

thank you so much


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
    • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!
    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)



    • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Related Information:
    Products: Computer Software
    Knowledge Base: Computerization

    Recent Threads at all Forums

    Sponsors

    Become a Sponsor today!