Professional Finishing

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

MLC vs Lenmar

2/11/22       
Mastercabman

Hello everyone
I'm trying to decide if I should look into the Lenmar brand vs MLC that I've been using
My problem now is that my supplier for MLC is not great
They only have one person doing color match and only there once a week
(COVID 19/not enough employees etc....)
So there's a Lenmar dealer(Benjamin Moore paint store) that has people there to help everyday
I stopped today and picked up a gallon of pre-cat to try it out
They told me that pre-cat is what they sell more than post cat like CV
I would like to hear from people who had experience with Lenmar
How do you like it?
And is it as good?or better? Than MLC?
Any info would be appreciated
Thanks

2/12/22       #2: MLC vs Lenmar ...
Daniel Shafner  Member

To weigh having a good supplier against having a product that you already know, that's the tightrope of decision making.

I can't comment on precats because I have an intense dislike of them. To me, they're a glorified nitrocellulose lacquer, yellowing just as much, but with an added dry mil thickness limitation of no more than 5 dry mils.

Perhaps use Lenmar for your painted topcoats and MLC for your clears and your primers and sealers?

2/13/22       #3: MLC vs Lenmar ...
Mastercabman

Daniel
Thanks for your opinion
I also not crazy about pre-cat
I'm trying the Lenmar pre-cat that I got over the weekend on a up coming job
However it is a oak cabinet door so the grain is showing (homeowners knows about grain showing and are okay with it)
I'm going to spray something else like a piece of MDF also to see how clean it lays
I just don't know what to do
I would like to stick with just one brand but if MLC is going to be a problem I don't want to deal with it
Will post later after I put second coat and report what I think
Thanks

2/16/22       #4: MLC vs Lenmar ...
D conti

I have used both. Mlc kept going up in price so I switched to Lenmar. Been using it for many years. N O problem with any of there products. But they gone up in price recently. Once you find out how to spray and the correct tip size and a good brand of gun then most major brands spray well.

2/16/22       #5: MLC vs Lenmar ...
Mastercabman

D Conti
Thanks for your reply

I think I might have to switch
My MLC supplier is not keeping up with my orders
I did tried the Lenmar pre-cat and looks good to me
But do you have any experience with their CV?
Don't get me wrong pre-cat is ok but CV is much better
Please anyone who uses Lenmar brand
Tell me what you think about it
Thank you

2/17/22       #6: MLC vs Lenmar ...
John Member

I've used a few gallons of Lenmar Duralaq WB, both clear and white. Both sprayed great and looked great. Also sprayed Duralaq Undercoater WB under the white topcoat. Amazing low viscosity and laid down beautifully. I would not use the Duralaq WB products for kitchen cabinets, but for non KCMA applications they are easy to spray, flow out great, cure hard, and look great.

John

2/18/22       #7: MLC vs Lenmar ...
d conti

Lenmar CV used it plenty of times no issues what so ever, its a fine product. Just like all CV immediate and complete clean up is a must.

It took me a while but I finally got my guys to really clean up the guns everyday. It takes a little bit more time but they are ready to spray everyday and spray well.

2/18/22       #8: MLC vs Lenmar ...
Jim Clark Member

I use Lenmar CV a lot and really like it.
Never had a problem with it.

  • Post a Response to this thread
  • notify me of responses to this topic
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Sponsors
    • Unique Machine & Tool
      Industrial Machinery for Door and Drawer Production
    • EX-FACTORY
      Importer and Dealer of New and Used Woodworking Machinery
    • SAMES KREMLIN formerly EXEL North America
      Precision Spraying Solutions From Pumps To Complete Application Systems-Design and Manufacture of Process Equipment Including Airspray, Airmix, Airless, Rexson Dispense, Electrostatic and Powder Coat
    • Simantech
      New & Used Machinery, Supplies, Tooling, Parts, and Abrasive Products
    • Apollo Sprayers Inc.
      High Volume Low Pressure Spray Systems
    • Supergrit Abrasives
      Industrial Quality Abrasives Manufactured by Leading US and Foreign Companies
    • Carter Products
      Band Saw Guides, Blades, Wheels, Tires, Line Lasers and 2D Projectors, Wide Belt Sanding Accessories, Vacuum Holding Systems and More

    Become a Sponsor today!