• Knowledge Base Search Results: 52
  • Forum Messages Search Results: 2920
    • Your search for post found 92401 documents (of 103418 searched).
    23001-26000 of the 92401 results are displayed below.
      


    Knowledge Base Results:

    Process Controls Versus Schedule Controls in Commercial Kiln-Drying Operations
    Here's a technically informative, if somewhat contentious, debate about different approaches to computerized kiln control, and the role of human operators in the kiln-drying process. June 13, 2014

    Photography Fees
    Need professional photography done? Want to reproduce an already-published photo? Bottom line: good photography is expensive. June 3, 2007

    Bail or Stick?
    A few communication lapses in the 3-way among a cabinetmaker, a designer, and the customer have given the cab guy itchy feet. This discussion delves deep into how and why jobs go wrong, how to handle communication, and when it's wisest to walk away. February 19, 2008

    Project manager compensation
    A conversation about PM pay grows into a detailed look at the cost of doing business. December 17, 2003

    Payment Schedules and Stategies
    Another discussion on the topic of down payments, progress payments, and final payments. November 30, 2009

    Pay Scales for Cabinet Shop Workers
    Pay rates vary by skill level, and also by region. Here, cabinetmakers dig into what makes a worker worth his wage. October 18, 2005

    Pricing Puzzles (The Case of the Custom Corbels)
    How do you explain to the customer why one-off woodworking products are so expensive? January 15, 2008

    Base and Shelter Ideas for a Bandsaw Mill
    Descriptions, pictures, and advice about setting up a bandsaw mill. May 21, 2009

    Process For Large Built-in Cabinets
    07/10/2016

    Honeycombing and Fresh Checking in a Newly Turned Newel Post
    A woodworker's report of a honeycombing and checking problem leads to a good discussion of wood drying defects and how they manifest themselves. March 3, 2009

    Parametric Programming Versus CAD and CAM Toolpath Creation
    A request for help in defining a shape mathematically for machine code leads into a discussion of situations where hand-coding and math are better than working in higher-level drawing and toolpath programs. February 19, 2013

    Basics of Furniture Stripping
    A newcomer to refinishing learns some early lessons. March 9, 2010

    Bringing a Spouse into the Business
    Can a husband and wife work together in a woodworking business? Depends who you ask. August 7, 2006

    Beaded Face-Frame Techniques
    Equipment and methods for creating high-quality beaded face frames. May 22, 2006

    Practical Ways to Reduce Drying Costs
    Five tactics to consider for cutting the cost of drying a load of wood. June 13, 2014

    Home-built band blade sharpener
    Plans and pictures. February 18, 2003

    Bubbles in Laminate on Steel Doors
    Troubleshooting a bubble issue with laminate applied to steel doors. January 24, 2010

    Baseboard-to-Stairs Trim Transition
    Here's a nice way to handle those trim transitions where baseboard moulding runs into the bottom of a staircase. October 25, 2006

    Poplar Versus Maple for Hand-Painted Cabinetry
    Cabinetmakers discuss whether a high-end cabinet job should use Maple or Cabinet for doors. December 8, 2010

    Prefinished Versus Unfinished Plywood for Cabinets
    For a moderate up-charge, pre-finished plywood saves a lot of labor and finishing materials cost. December 2, 2010

    Beaded Face Frame Fabrication
    There's more than one way to bead a frame, as this discussion proves. January 24, 2005

    "Hinge-Fold" Door Details
    How to double up two doors in an entry so that one hinges off the other — like a bi-fold, but different. May 26, 2008

    Backing Up Critical Computer Files
    Backup is important. (Backup is important.) Here, CAD pros explain simple, effective, and thorough backup methods. September 24, 2006

    Blade Lubricant and Component and Blade Life
    Soapy water, kerosene, or what? Keeping the blades clean and reducing friction is one thing, getting longer life out of your equipment is something else. February 8, 2008

    Plywood Thicknesses and Dado Widths
    A detailed discussion of the fine points of making a well-fit dado joint. Calipers, shims, decimals, fractions, and more. May 14, 2006

    Big-Box Cabinet Installation Pay Rates
    Installing for the big boxes is a whole different business. Here are some rumors on how the setup works. January 26, 2008

    Beyond the Spiral: Serpentine Stair Example
    Here's a quick tour (concept to finished product) of an ambitious free-standing staircase project that includes opposite curves. January 12, 2012

    Bidding Cabinet Work for School Jobs
    Supplying cabinets for school construction or renovation projects is a rough business where it's easy for the small competitor to get beat. October 27, 2011

    Planing Very Thin Boards
    Planing boards to a 1/8-inch thickness is tricky, but not impossible. Here, experts describe how it's done. December 1, 2005

    Bending Mahogany Trim
    A furniture-maker gets tips on making tight curves with Magohany. October 2, 2005

    Bubbles Under Laminate
    Help with a visual defects associated with spray contact cement and laminate countertops. April 21, 2011

    Buying a Used Straight-Line Rip Saw
    Tips on inspecting an old straight-line rip saw for serviceability before plunking down your cash. May 16, 2008

    Pricing Cabinet Installs
    This thread on installation pricing takes an interesting approach: Compare with what the big-box stores charge. December 2, 2006

    Home built bandsaw mill
    Profusely illustrated piece on building your own bandmill. June 16, 2003

    Hawaii Solar Kiln Show and Tell
    A forum member from Hawaii shows his backyard solar drying kiln and gets some advice on improving it. May 27, 2014

    Panel Saw Chips Melamine Inside The Book
    Voids between stacked pieces could be the culprit. April 10, 2005

    Powderpost Beetle Problems
    Here's a good description of a log house infested with powderpost beetles. February 9, 2008

    Bed Frame Dimensions Compared to Mattress Size
    An inch of clearance around the mattress is usual (sometimes more). January 25, 2013

    Bugs in Osage Orange
    A bowmaker troubleshoots tiny bug holes in his stock of Osage Orange. January 8, 2010

    High-Performance Respirator Cartridges
    Thoughts on respirator cartridges that really work. August 17, 2009

    Planning for a Successful Timber Harvest
    Plan carefully and balance your priorities as you decide who should harvest your saleable trees, and how. July 30, 2007

    Blotchiness on stained birch veneer
    Preventing a blotchy appearance when staining birch v

    Beating a Cabinet to Pieces
    You learn a lot about the strength of various joinery and installation methods when you have to tear out a cabinet and break it into pieces for disposal. July 11, 2013

    Power-Pole Re-Use Potential
    Old treated utility poles may have some potential for salvage re-use, but they are trouble to deal with. April 18, 2009

    Panel Saw/Slider Comparison
    Cabinetmakers compare the advantages of vertical panel saws and sliding table saws, with special reference to ripping. November 11, 2005

    Heat-Bending Laminate
    With care and attention, you can bend laminate to a one-inch radius. October 28, 2005

    Protecting Door Backs when Glazing the Fronts
    Advice on keeping smudges off the backs of doors when glazing. October 20, 2013

    Painting New Frameless Cabinets
    04/10/2015

    Boxing Out Columns
    Quick tips on wrapping columns with a four-sided hardwood box. November 28, 2011

    Precatalyzed vs. catalyzed lacquer
    The technical differences between these two types of lacquers. July 18, 2000

    Cutterhead balance
    Solving the problem of a vibrating planer/moulder. January 16, 2002

    Troubleshooting a Cyclone Setup
    A woodshop owner struggles with a dust collector whose filter quickly clogs with fine sanding dust. October 26, 2011

      ---   Return to Top   ---   View More Results   


    Forum Results:

    Re: 2k satin finish
    A message posted at WOODWEB's Finishing Forum (5/25/23) -- What are you spraying it on? ...

    Re: Curved cabinet top
    A message posted at WOODWEB's Cabinetmaking Forum (5/25/23) -- I agree with Tom. ...

    Re: lumber warping as it is ripped
    A message posted at WOODWEB's Architectural Woodworking Forum (5/25/22) -- It is not normal. It is a sign of case hardened lumber - a drying defect. ...

    Re: spring or winter harvested wood: differences
    A message posted at WOODWEB's Sawing and Drying Forum (5/25/22) -- I have a question that I thought was related to the subject (maybe not). I have ha ...

    Re: spring or winter harvested wood: differences
    A message posted at WOODWEB's Sawing and Drying Forum (5/25/22) -- In the warm weather, the various molds and mildew and blue stain fungi are active, ...

    Re: Inset doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/25/22) -- Hard sand. I usually slow my Mirka Ceros down 3 bumps and do 3 quick passes -22, 45, + ...

    Estimator
    A message posted at WOODWEB's Business and Management Forum (5/25/22) -- We are in the market for an estimator. Does anyone have any recommendations ...

    Inset doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/25/22) -- On building a cabinet with inset doors do you put a 1/8” round over on your door edges ...

    Re: Inset doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/25/22) -- Just a quick hand sanding to just break the edge. A full radius will show as a shadow ...

    Re: CNC trouble
    A message posted at WOODWEB's CNC Forum (5/25/22) -- I'm not sure if the sensors are the problem. what is the power? could there be a bug in the prog ...

    Re: Inset doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/25/22) -- RichC That was my thought to thanks for the input ...

    Re: CNC trouble
    A message posted at WOODWEB's CNC Forum (5/25/22) -- Have you tried putting different sensors? ...

    Re: Cope and stick reversible
    A message posted at WOODWEB's Architectural Woodworking Forum (5/25) -- Im not positive but I dont think the re-stackable/reversible router bit your ...

    Bridgit Bench as a construction software for subcontractors?
    A message posted at WOODWEB's Business and Management Forum (5/25) -- Hello, I'm a subcontractor with a team doing multiple projects for several diff ...

    Re: Cope and stick reversible
    A message posted at WOODWEB's Architectural Woodworking Forum (5/25) -- Better glass insulators are sensitive to the narrow rabbets problem. We can u ...

    Re: Cope and stick reversible
    A message posted at WOODWEB's Architectural Woodworking Forum (5/25) -- If you do find something with a 3/8" rabbet, the black spacer won't be a ...

    Re: Cope and stick reversible
    A message posted at WOODWEB's Architectural Woodworking Forum (5/25) -- Thanks for sharing that glass source David. I will check them out. My local g ...

    Re: DRO operation instructions
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- The answer lies within Felder. Call the numb kid back and tell him you need to talk to so ...

    Re: Question for Dennis
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- I may be mistaken, but I don't believe it makes any difference which door you hinge, at l ...

    Re: Question for Dennis
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- I call them an uneven leg corner, no problem, I have always tried to hinge the wider door ...

    Re: SEEKING SHOP WITH WIDEBELT WIRE BRUSH MACHINE
    A message posted at WOODWEB's Solid Wood Machining Forum (5/25) -- Eric, Not too close to nyc but not undoable, Jawor Lumber in Wallingford CT www.ja ...

    Re: Maybe a dumb question?
    A message posted at WOODWEB's Finishing Forum (5/25) -- Precats have a self life in the container. ...

    Re: VFD for 5hp motor
    A message posted at WOODWEB's Furniture Making Forum (5/25) -- So, 1. As stated you will not find any normally rated-for-single phase input VFD for & ...

    Re: Paint for the shop floor
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- Thank you all for your inputs. I think I'll rent an orbital sander/grinder, remove existi ...

    Re: Paint for the shop floor
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- We painted a portion of our shop with a simple floor enamel. I would go to a sherwin Will ...

    Re: Paint for the shop floor
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- An orbital won't do much on leveling concrete, if at all. I suggest a big rotary with dia ...

    Re: Spray booth guidance for paint finishes
    A message posted at WOODWEB's Finishing Forum (5/25) -- don't know how you do high end custom cabinetry with rolled latex, but you could look into AW ...

    Re: Dehumidifier or AC?
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- Never heard of using an AC. Would you blow the cold air outside? Definitely use a deh ...

    Re: HELP WITH Z AXIS FAULT PLEASE
    A message posted at WOODWEB's CNC Forum (5/25) -- bb not run then turn the shaft by hand then see on pc on screen (in wsc) if the numbers are changes ...

    Dehumidifier or AC?
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- For a relatively small-size kiln, what do you think is better, a dehumidifier, or an ...

    Re: painting MDF
    A message posted at WOODWEB's Finishing Forum (5/25) -- Keep a rag damp with denatured alcohol and wipe the tip/nose piece often. It drys very quickl ...

    Re: Mounting Wall Paneling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/25) -- OTOH if you can nail though the face, that would be a different story ...

    painting MDF
    A message posted at WOODWEB's Finishing Forum (5/25) -- Looking for tips on spraying BIN shellac primer. I have a 4 stage HVLP. Thank you ...

    Re: Dehumidifier or AC?
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- Dehumidifier because it adds heat. John ...

    Re: Fixing SCM Basic 1 edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- I hae a K201 which is very similar to the Basic 1. I will take a photo of the exploded vi ...

    Fixing SCM Basic 1 edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- Our edgebander suddenly quit on us this past week. It looks like the heater for the glue ...

    Re: Commercial bidding
    A message posted at WOODWEB's Business and Management Forum (5/25) -- I have hired salespeople over the years and it has never really worked out. But ...

    Pods for flat table
    A message posted at WOODWEB's CNC Forum (5/25) -- Hello all hope your having a great day I own a cnc flat table and i got a big project about 600 int ...

    Re: Need advice Crotch Mahogany Conference table
    A message posted at WOODWEB's Veneer Forum (5/25) -- I can recommend a very good shop in Idaho if you're considering subbing this out. Wood River Ven ...

    Re: CNC-Cart
    A message posted at WOODWEB's CNC Forum (5/25) -- A buddy of mine works at a big metal fab shop and I traded him some woodwork for carts. We copied t ...

    Re: Fixing SCM Basic 1 edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- Thanks for your response. Its an odd situation. The thermostat kicks in and moves to norm ...

    Re: Need advice Crotch Mahogany Conference table
    A message posted at WOODWEB's Veneer Forum (5/25) -- I have done what david S has done with the two ply. One word of caution though- If you do make a ...

    Re: Castle Tsm 20 pocket machine issues
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- Last year I dumped both of my older castle machines on Craigslist and bought two new ones ...

    Re: CNC Carving A Trunk
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- The sequence you need is achieved by "live sawing" and is common for hardwo ...

    Re: Commercial bidding
    A message posted at WOODWEB's Business and Management Forum (5/25) -- I'm thinking that there are other jobs that would be better served by someone e ...

    Re: Castle Tsm 20 pocket machine issues
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- send a few pics of router & the way it is mounted. you should get lots of advice doin ...

    Re: CNC-Cart
    A message posted at WOODWEB's CNC Forum (5/25) -- Shop silly photo by some shop silly Guys, But you can see the $150.00 bakers scaffolds we use where ...

    Re: Pods for flat table
    A message posted at WOODWEB's CNC Forum (5/25) -- You can make tooling or you can make doors. Think about it. Add one dollar to the price of each doo ...

    Re: Pods for flat table
    A message posted at WOODWEB's CNC Forum (5/25) -- Hello jerry can u share a picture of this cups if possible Thank you tom but i like to create stuff ...

    Re: CNC Carving A Trunk
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- Catalpa would be a very good choice. Incredibly lightweight and very stable while dry ...

    Re: CNC-Cart
    A message posted at WOODWEB's CNC Forum (5/25) -- been using these for 10 years mine are made from mdf2 for toughness you can use plywood i suppose ...

    Re: Pods for flat table
    A message posted at WOODWEB's CNC Forum (5/25) -- I have made vac pods for my flat bed using 25 mm pvc. ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- We only glue teak or any troublesome woods with epoxy. People often talk about glueing te ...

    Re: holzher edgebander issue
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- the switch above the second end trim saw will not preclude the machine from starting up. ...

    Re: Stripes in Finish
    A message posted at WOODWEB's Finishing Forum (5/25) -- Ignoring any tip issues here (which i bet is the likely cause): Stealth is regularly very hig ...

    Re: Manufacturing Process details
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- Hi Lauren, Maybe I am totally out of line, but may I suggest a book? 2 second lean by Pau ...

    Re: Finishing time for topocoats
    A message posted at WOODWEB's Finishing Forum (5/25) -- I think you really need to give more specifics as to stain vs paint. Average kitchen could be ...

    Manufacturing End Grain Block Flooring??
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- I make/sell some various wood flooring and paneling products and one product that I'd ...

    Re: Holz Her Sprint "wish boning" on 2mm PVC
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- We run A LOT of 3mm edged doors (PL on Melamine) and I found that if you tighten the tole ...

    Re: NIR Holz-Her Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- your shoes are making contact with panel edge and "rubbing" the coating off; th ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- Per Titebond; Can Titebond Wood Glues be used for projects using teak, cedar or redwood? ...

    Re: Stripes in Finish
    A message posted at WOODWEB's Finishing Forum (5/25) -- OK so got a new 09-094 tip from kremlin as per their suggestion which is what we have used fo ...

    Kiln Drying of Hardwood Lumber Short Course
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- This is a reminder that Penn State Extension will be holding a Kiln Drying of Hardwoo ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- Rich C, brings up a good point about gluing due to its oil content. Is there a certain ty ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- I’ve done many custom projects like this in teak. If the customer is willing to pay for i ...

    Re: Looking for tooling recommendations for CNC router
    A message posted at WOODWEB's CNC Forum (5/25) -- Pls tell me what material and what work you want to do? we have tools for your options. but for dif ...

    Re: Stripes in Finish
    A message posted at WOODWEB's Finishing Forum (5/25) -- Spraying in Southern Cal. so Stealth is 275 VOC. and uses new 5% catalyst mix. has been like ...

    Re: Stripes in Finish
    A message posted at WOODWEB's Finishing Forum (5/25) -- Not sure about Stealth 275 but we spray regular Stealth and reduce it with their Flow Enhance ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- Wow that's a great price Ryan, I'll definitely be shopping around. Thank you Rich for the ...

    SCMI edgebander service teck recommendation ?
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- In Need of a service tech for my SCMI Edgebander Olympic K208 A Any recommendations ? Tha ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- Shop around on that price. We just made a bench out of teak and got prices from $11BF to ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- Many pva failures over the years glueing typical woods. We have never considered it for t ...

    Re: a show of hands...
    A message posted at WOODWEB's CAD Forum (5/25) -- Yes, several photo rendering options. It just depends on how much effort you need to put in. ...

    SCMI Alfa 32 C
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- I need to access the machine parameters. Any Help? ...

    Re: Biesseworks - Parametric arks
    A message posted at WOODWEB's CNC Forum (5/25) -- you can use this lisp file to change polyline direction (cw / ccw) in autocad. (defun c:rpoly ( / u ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/25) -- Pat, There is also an abundance of land near all the Major OK cities and depend ...

    Re: Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/25) -- Nope, no steff's. Today for instance a 1Hp feeder ran non stop for 8 hours on the ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/25) -- I have noticed the correlation between schools and tech startups, for decades, ...

    Re: Pole Barn vs. Steel Building for Woodshop
    A message posted at WOODWEB's WOODnetWORK Forum (5/25) -- You are 2 hrs North of NYC. Pretty cold climate. Steel buildings are less expensive if buil ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/25) -- What wasn't in OK 30-40 years ago was the University of CA Berkley or Stanford ...

    Re: Laminate to Melamine
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- Yes, with Wilsonart® RE-COVER™ Laminate, this application is now simple and achievable. - ...

    Alphacam VBA
    A message posted at WOODWEB's CNC Forum (5/25) -- Need help with a VBA program. Need to fillet corners and cannot seem to figure it out. My understan ...

    Re: Busellato Jet Concept M Pneumatic Cylinder
    A message posted at WOODWEB's CNC Forum (5/25) -- Yeah, switched the valves from one end to the other and no effect, solenoids work manually, no erro ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/25) -- Cities are interesting in that knowledge is exchanged more easily in a locality ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/25) -- The tech boom didn't move into SF until the last 10 years, until then it was an ...

    Disposing of chemical waste
    A message posted at WOODWEB's Finishing Forum (5/25) -- I'm relocating my shop into a municipality that wants me to note how I'm gojng to dispose of ...

    Re: Exterior Door
    A message posted at WOODWEB's Finishing Forum (5/25) -- I had a customer years ago that wanted everything to look like an automotive finish. I used M ...

    Re: Busellato Jet Concept M Pneumatic Cylinder
    A message posted at WOODWEB's CNC Forum (5/25) -- The magnets don't control moment. They are for the prox switches. If you're not getting a tool chan ...

    Performance bond
    A message posted at WOODWEB's Business and Management Forum (5/25) -- I am putting together a bid on a large restoration job. I would act as GC and s ...

    KV Standard Cutter
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- One of my past companies I worked at, we had a guillotine type cutter for cutting the KV ...

    Re: Flexicam
    A message posted at WOODWEB's CNC Forum (5/25) -- If air pressure to spindle is low by even a couple of psi, it will trip. Need at least 90 psi or 6. ...

    Re: Acad 2017
    A message posted at WOODWEB's CAD Forum (5/25) -- The three bars at the very bottom right are the bottom menu settings. You can display (or not) the ...

    water activated dowels
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- Hi, We are switching over to a case clamp for assembly and I'm wanting to know the drying ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- All I can say is that this has happened to me before. The moisture content has to be righ ...

    Re: Paintable PVC
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- We used paintable pvc edge banding recently and had no problems at all with the final fin ...

    Re: DIY 5 foot wide bandsaw mill
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- He's got the full build on youtube IF you have time to watch them all. Very interesti ...

    Re: conversion varnish over oil
    A message posted at WOODWEB's Finishing Forum (5/25) -- I just had this conversation woth my ML rep and he said you don't want to use oil based stain ...

    Re: darkening wood
    A message posted at WOODWEB's Finishing Forum (5/25) -- Yes that's my best guess they sell African Mahogany their. It darkens with age and the exteri ...

    Re: Disposing of chemical waste
    A message posted at WOODWEB's Finishing Forum (5/25) -- you can get drums from safety kleen but they are expensive. look for a supplier of drums. ...

    Re: Kremlin parts
    A message posted at WOODWEB's Finishing Forum (5/25) -- Dan, please contact me and I can put you in touch with a local Distributor. jean.murray@exel- ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/25) -- Pat, Which regulations would you (or Sowell) take away? ...

    Re: Disposing of chemical waste
    A message posted at WOODWEB's Finishing Forum (5/25) -- id assume plastic with chemicals against metal never being a good idea ...

    Re: DIY 5 foot wide bandsaw mill
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- it's a 10 horsepower 3 phase motor that runs off single phase ...

    Re: darkening wood
    A message posted at WOODWEB's Finishing Forum (5/25) -- If it was just a color tone issue and not a graining issue, u could direct dye ...

    Re: DIY 5 foot wide bandsaw mill
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- Any idea what size electric motor is on the bandmill? Bob ...

    Re: Busellato Jet Concept M Pneumatic Cylinder
    A message posted at WOODWEB's CNC Forum (5/25) -- Could be the piston seal is bad. Easy to fix ...

    Re: Disposing of chemical waste
    A message posted at WOODWEB's Finishing Forum (5/25) -- call safety kleen. they are nationwide. ...

    Re: Cabnetware Replacement
    A message posted at WOODWEB's CAD Forum (5/25) -- Hi Ryan. First off, you should know that I work out of the head office here at Microvellum. I am of ...

    Makita 2012NB vs Solid Wood
    A message posted at WOODWEB's Solid Wood Machining Forum (5/25) -- 1) http://www.workshoppages.com/ws/misc/wood-hardness-chart.pdf. This link shows t ...

    Re: Felder CNC anyone?
    A message posted at WOODWEB's CNC Forum (5/25) -- No we still didnt get one yet. we looked at a biesse and found it built way more robust than the fe ...

    Re: Installing loose back splashes
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/25) -- best way we discovered is to place backsplash in place and note reces ...

    Wood Shower
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/25) -- Was finishing up some work at a customers house when she asked me abo ...

    Re: Cnc Advices
    A message posted at WOODWEB's CNC Forum (5/25) -- Anthony, After market pods are available for most if not all nested routers equipped with a grid ta ...

    Re: Butt joints in edge tape
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- For one-offs I cut the band about an inch longer than needed. I iron it on but leave abou ...

    Solid wood bits
    A message posted at WOODWEB's CNC Forum (5/25) -- We've finally gotten comfortable enough with our nesting machine that we are making jigs and machin ...

    Re: Solid wood bits
    A message posted at WOODWEB's CNC Forum (5/25) -- Typically, I run a 3/4" 3 flute Upshear with 30° helix. Try Vortex 1880. Three flutes give me ...

    Re: Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/25) -- I would agree with Rich in using one manufacturers product but even with that some of the bes ...

    Re: edge of high gloss slab doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- High gloss on MDF brings back a couple of bad memories. Learning how to seal the edges, t ...

    Re: Short needle pine for pier
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- Not every piece will rot right away, but some will...if 1/10 or 1/20mdo, is this a fa ...

    Re: Wood Shower
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/25) -- Do they have hard water? I see a disaster trying to remove lime and s ...

    Installing loose back splashes
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/25) -- Im just curious how you install loose plastic laminate back splashes? ...

    Re: Cnc Advices
    A message posted at WOODWEB's CNC Forum (5/25) -- Get a nesting machine with suction cups that fit into the nesting table. I setup a wine cellar busi ...

    Re: Makita 2012NB vs Solid Wood
    A message posted at WOODWEB's Solid Wood Machining Forum (5/25) -- Hmm... Let me ask another question: a) It looks like that Makita 2012NB is more po ...

    Re: edge of high gloss slab doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- once i was doing a coffered ceiling and decided to just hand break everything on site as ...

    Re: Felder CNC anyone?
    A message posted at WOODWEB's CNC Forum (5/25) -- hello all so Dave Edgerton did you get the format cnc ? i am between 3 cnc's a holzher a format4 an ...

    Cnc Advices
    A message posted at WOODWEB's CNC Forum (5/25) -- hello all i am looking for a cnc that is > x:3600 (mm) >y:1800(mm) where i can nest a full me ...

    Re: Wood Shower
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/25) -- I've seen wood bathtubs, but they were wetted out with fiberglass. If ...

    Re: Installing loose back splashes
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/25) -- Rob, I don't install anymore, but the coolest trick I saw for this wa ...

    edge of high gloss slab doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- I'm working on a kitchen that will have a high gloss 2k Urethane finish. The doors are MD ...

    Re: edge of high gloss slab doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- 1 vote for routing. Breaking by hand means different things to different people. Anyone c ...

    Re: Short needle pine for pier
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- Won't copper sulfate just kill algae? Not sure it gets you any rot resistance. Be car ...

    Re: Uneven thickness and twisted 12" and 15" ironwood
    A message posted at WOODWEB's Solid Wood Machining Forum (5/25) -- Perhaps you should find another supplier - that wood was poorly sawn, so warpage i ...

    Butt joints in edge tape
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- Hi All. Looking for some tips and tricks for getting a nice butt joint when edgebanding a ...

    Re: Cabnetware Replacement
    A message posted at WOODWEB's CAD Forum (5/25) -- I went from cabnetware to Mozaik. I also use enroute pro for my 3D work. ...

    Re: Scraper Plane
    A message posted at WOODWEB's Furniture Making Forum (5/25) -- Thanks for the great recommendations! ...

    Re: Scraper Plane
    A message posted at WOODWEB's Furniture Making Forum (5/25) -- Mark is absolutely correct. ...

    Re: Cnc Advices
    A message posted at WOODWEB's CNC Forum (5/25) -- see attached image of the project and machine ...

    Slab lunch counter/bartop around a corner
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/25) -- I've been asked to help with installation of a slab lunch counter tha ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/25) -- "I'd imagine you displace the bottle neck, and end up in a bit of a chase- ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/25) -- I agree with David Waldmann's approach to a large extent. It is great when his ...

    Re: Build or buy?
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- The idea to get on this is that the pie grows it does not stay the same size. This chart ...

    Re: Interesting article about disruptive economies
    A message posted at WOODWEB's Business and Management Forum (5/25) -- I've been criticized by my liberal acquaintances for utilizing computers for ev ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/25) -- The difference between a small company and a large company is how well organize ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/25) -- A very quick metric is dollars per employee. Calculate the existing value for a ...

    Re: Interesting article about disruptive economies
    A message posted at WOODWEB's Business and Management Forum (5/25) -- What's your point? Free trade is a straw man argument, a free trade agreement s ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/25) -- Paul-- agreed. If it was my shop, I'd have data. Watched the old shop deal with ...

    Re: Paint grade doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- I am doing mostly pretty high end cabinetry for kitchens and MDF is a no-no word to many ...

    Re: The T and M curse.
    A message posted at WOODWEB's Business and Management Forum (5/25) -- If you always make more money by bidding, then you need a higher rate on materi ...

    Re: Plank door construction
    A message posted at WOODWEB's Architectural Woodworking Forum (5/25) -- No they are not exactly for a castle - but close enough to it! An old school ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/25) -- I'm hard of understanding sometimes ;) So I did learn about TOC in school, and ...

    The T and M curse.
    A message posted at WOODWEB's Business and Management Forum (5/25) -- Several builders I work for that prefer I work on a time and material basis for ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/25) -- Mel, you asked, " But if one wants to get a general idea of problems to co ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/25) -- There are a couple of approaches. To my mind, unless the shop is very technolog ...

    Re: The T and M curse.
    A message posted at WOODWEB's Business and Management Forum (5/25) -- That's good insight. I have been in business for 5 years. I opened my own small ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/25) -- Kay so say finishing is the bottleneck. You figure out you can get another shif ...

    Re: Plank door construction
    A message posted at WOODWEB's Architectural Woodworking Forum (5/25) -- We always leave about .040" between the planks. They are most often v-jo ...

    paperwork
    A message posted at WOODWEB's Business and Management Forum (5/25) -- anyone got any great systems they want to share in regards to paperwork. Curren ...

    Re: Build or buy?
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- China buys planes from us because there is a comparative advantage currently, but have yo ...

    Re: Yet another Minwax adhesion issue
    A message posted at WOODWEB's Finishing Forum (5/25) -- My guess is Aqualente is the problem. Try using the same toner and stain then skip the sealco ...

    Re: Interesting article about disruptive economies
    A message posted at WOODWEB's Business and Management Forum (5/25) -- Tim/JWS You sound like a frustrated writer? I think it is natural to readers of ...

    Re: Biesse Rover K 1532 Error
    A message posted at WOODWEB's CNC Forum (5/25) -- sound very strange in biesse, you cant see the plc ,because normaly refernce sensor(its micro switc ...

    Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/25) -- How is this done? (I know it's a biggy) This was touched on in another thread a ...

    Re: The T and M curse.
    A message posted at WOODWEB's Business and Management Forum (5/25) -- I 2nd David on this. Many small shops fail to charge what the market will bare. ...

    Re: Biesse Rover K 1532 Error
    A message posted at WOODWEB's CNC Forum (5/25) -- Dear mr yakkov,, When I start machine, stop , reset , clear, Z axis start moving up..(quote z axis ...

    Re: Biesse Rover K 1532 Error
    A message posted at WOODWEB's CNC Forum (5/25) -- Dear mr. Yaakov biesse technician fixed this problem today.. Machine z axis was moving without pres ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/25) -- Pat, indeed.... And sometimes the big kahuna with many illsuited hats also has ...

    Re: Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/25) -- I personally do not like the excite gun specifically for this reason. The o ring on the end c ...

    Re: suction loss
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/25) -- Thanks Ken, I'm happy with my system as is and a bit of a loss is ...

    Re: suction loss
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/25) -- Adding 40' of 10" pipe will add .72" of static pressure ...

    Re: rustic white oak dining table
    A message posted at WOODWEB's Furniture Making Forum (5/25) -- I use regular ole satin polyurethane on my solid wood kitchen tables and it has stood ...

    Re: Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/25) -- If its brand new, why not contact the outfit you purchased it from and ask for one. Should ha ...

    Re: Interesting article about disruptive economies
    A message posted at WOODWEB's Business and Management Forum (5/25) -- Speaking of NY Times articles, I sure miss Paul Down's blog. How is the book co ...

    Re: Wide belt contact drum recover
    A message posted at WOODWEB's Solid Wood Machining Forum (5/25) -- Try these folks. http://www.westernroller.com/ They've recovered an edge sander dr ...

    Re: Biesse Rover K 1532 Error
    A message posted at WOODWEB's CNC Forum (5/25) -- as i understand from you its move even without you press"start" to make homing? ...

    Re: Felder Pods
    A message posted at WOODWEB's CNC Forum (5/25) -- I'm looking specifically for Felder brand pods or a cross reference that will seat in their grid ta ...

    Re: Biesse Rover K 1532 Error
    A message posted at WOODWEB's CNC Forum (5/25) -- if you slow down the speed by the reamote control ,can you stop the z axiss moving up? ...

    Re: Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/25) -- I think i found it but this one place wants like 73.00 for a pack of seals. Crazy!! ...

    Re: Best practices for using Poly Bak 69 from Holdahl
    A message posted at WOODWEB's Veneer Forum (5/25) -- "We recommend using a wet PVA Adhesive." ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/25) -- Theory of Constraints [Eliyahu M. Goldratt] ...

    Re: Paint grade doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- I don't get it, which part of this profile don't you like? ...

    Re: Interesting article about disruptive economies
    A message posted at WOODWEB's Business and Management Forum (5/25) -- Robots stealing jobs ...

    Re: Does anyone know how to make this joint?
    A message posted at WOODWEB's Architectural Woodworking Forum (5/25) -- I like Mark's idea about multiple blades with spacers. It will take some tedi ...

    Re: Crown on ceiling and cabinets
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/25) -- I run in to this often. I spray crown at top of cabinets to match cab ...

    Carving veneered drawer front
    A message posted at WOODWEB's Veneer Forum (5/25) -- I have a customer who wants one of my hand carvings on a rounded drawer front. I am making the d ...

    Re: Carving veneered drawer front
    A message posted at WOODWEB's Veneer Forum (5/25) -- Bend the front without the face veneer, cut a recess for a solid walnut plug where the carving w ...

    Re: Crown on ceiling and cabinets
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/25) -- I have a job just like that with dentils. I am going to spray the cro ...

    Re: My first cut on quarter sawing 36'' Beech
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- I came up with a better way of quarter sawing those big slabs. I made this video to h ...

    Re: My first cut on quarter sawing 36'' Beech
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- Looks to me the rift is to much work to cut and doesn't justifie the time and work to ...

    Re: Stair Treads Cupping
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/25) -- Tim , At some point in the day is there direct UV or the sun hitting ...

    Re: laminate cleaning
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/25) -- I remember once a manufacturer recommended we wipe 2 times w/ lacquer th ...

    Re: Stair Treads Cupping
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/25) -- Lets go for the obvious, is the night time cleaners using a wet mop a ...

    Re: laminate cleaning
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/25) -- Soap and water. I get the same thing and then I just washed it afterward ...

    Re: Exterior screen doors
    A message posted at WOODWEB's Architectural Woodworking Forum (5/25) -- White oak. Stable and great weather resistance. ...

    Re: New to finish dept
    A message posted at WOODWEB's Finishing Forum (4/25/25) -- a couple of thoughts do u soak the aircap, if so, stop, here is why when u drop the air ca ...

    Re: The 5-Minute Panel
    A message posted at WOODWEB's CNC Forum (4/25/25) -- Without seeing the machining required for the panels it is difficult to give a good answer. Thou ...

    Creating Slots as Parts in Cabinet Vision
    A message posted at WOODWEB's Cabinetmaking Forum (4/25/25) -- Hello folks, I am a newbie to cabinetvision, looking to create a part that I can drop ...

    Re: Business Opportunity
    A message posted at WOODWEB's Business and Management Forum (4/25/23) -- J, I agree with all that has been said. I did not take a salary for the firs ...

    Help design a simple CNC router table
    A message posted at WOODWEB's CNC Forum (4/25/23) -- Folks, I need help and advice to come up with a simple CNC router table for one task, cutting th ...

    Re: Large custom knife for 5"Tx3"D arched heavy crown moulding? Laguna SSII
    A message posted at WOODWEB's CNC Forum (4/25/23) -- BH had a good point. I recently did some rift cut walnut crown. Since you can't buy rift in waln ...

    Re: Dovetail fitment
    A message posted at WOODWEB's Cabinetmaking Forum (4/25/23) -- Update problem corrected. The back of the machine has a dual guide plate the a guide p ...

    is it worth it to upgrade powermatic e16
    A message posted at WOODWEB's Cabinetmaking Forum (4/25/23) -- I've been thinking about getting a byrd head on my old planer, but I'm just not sure i ...

    Re: Large custom knife for 5"Tx3"D arched heavy crown moulding? Laguna SSII
    A message posted at WOODWEB's CNC Forum (4/25/23) -- That can be cut on an arch molder. If it is a one off it does not make sense. For a sanity check ...

    Re: is it worth it to upgrade powermatic e16
    A message posted at WOODWEB's Cabinetmaking Forum (4/25/23) -- You can greatly improve a straight blade on a planer by grinding a front bevel on it. ...

    Re: is it worth it to upgrade powermatic e16
    A message posted at WOODWEB's Cabinetmaking Forum (4/25/23) -- Save your cash and put it toward a newer planer that can offer you more capabilities. ...

    Re: is it worth it to upgrade powermatic e16
    A message posted at WOODWEB's Cabinetmaking Forum (4/25/23) -- Current planer is a powermatic e16. ...

    Re: is it worth it to upgrade powermatic e16
    A message posted at WOODWEB's Cabinetmaking Forum (4/25/23) -- What is your current planer? ...

    Re: Help design a simple CNC router table
    A message posted at WOODWEB's CNC Forum (4/25/23) -- Some more pics. ...

    Re: dovetail bits
    A message posted at WOODWEB's Cabinetmaking Forum (4/25/22) -- "What makes your Cantek sub par Karl?" -The spindle runs really warm. I don' ...

    Products Innovation and Technology Summit
    A message posted at WOODWEB's Sawing and Drying Forum (4/25/22) -- The Forest Products Innovation and Technology Summit will focus on what technologi ...

    Re: Optimizing your materials
    A message posted at WOODWEB's Finishing Forum (4/25/22) -- Like Chris said, You can get a hopper to use on your pump I got one when I got my CAT pump ...

    Re: Optimizing your materials
    A message posted at WOODWEB's Finishing Forum (4/25/22) -- Mastercabman and Chris, Thanks for the info, I talked to my dealer this morning and he sai ...

    Re: Optimizing your materials
    A message posted at WOODWEB's Finishing Forum (4/25/22) -- Mastercabman and Chris, Thanks for the info, I talked to my dealer this morning and he sai ...

    Re: Double Hung Window Shop Drawings
    A message posted at WOODWEB's Architectural Woodworking Forum (4/25/22) -- Thank you all for the suggestions. I guess there is no free lunch, but the ...

    Re: dovetail bits
    A message posted at WOODWEB's Cabinetmaking Forum (4/25/22) -- Wow. Should have gotten the Grizzly. But it sounds like yours is a automatic where min ...

    Re: CV not curing properly over bleached Oak.
    A message posted at WOODWEB's Finishing Forum (4/25/22) -- Hey there. It is self-made two-part wood bleach. A dilution of lye and 27% (I think) perox ...

    Optimizing your materials
    A message posted at WOODWEB's Finishing Forum (4/25/22) -- I was wondering what you are doing to optimize your material use with the finishes that ha ...

    Optimizing your materials
    A message posted at WOODWEB's Finishing Forum (4/25/22) -- I was wondering what you are doing to optimize your material use with the finishes that ha ...

    Re: Saltwater aquarium hoods and bases
    A message posted at WOODWEB's Finishing Forum (4/25/22) -- I have only built a few for friends over the years including one for my personal 600g salt ...

    Re: Saltwater aquarium hoods and bases
    A message posted at WOODWEB's Finishing Forum (4/25/22) -- shenendoah, I understand that completely. I have built my fair share of strip built kayaks ...

    Re: Looking for small kiln controller
    A message posted at WOODWEB's Sawing and Drying Forum (4/25/22) -- Johnson controls makes temp controllers. I got mine for $65. For temp monitoring a ...

    Re: Looking for small kiln controller
    A message posted at WOODWEB's Sawing and Drying Forum (4/25/22) -- That would be "AC Infinity" controller 67 or 69. Newest will have wifi. ...

    Re: dovetail bits
    A message posted at WOODWEB's Cabinetmaking Forum (4/25/22) -- Mine is automatic. I don't think color of paint matters. That same machine is sold wit ...

    Re: Optimizing your materials
    A message posted at WOODWEB's Finishing Forum (4/25/22) -- Scott No problems! That's funny that you mentioned a vase type of container I wish someone ...

    Re: Saltwater aquarium hoods and bases
    A message posted at WOODWEB's Finishing Forum (4/25/22) -- Thomas, What do the boatyard folks use on their teak and mahogany that is exposed to the e ...

    Re: CV not curing properly over bleached Oak.
    A message posted at WOODWEB's Finishing Forum (4/25/22) -- Matthew, - What type of bleach did you use? - How many coats? - If multiple, what was the ...

    Re: Optimizing your materials
    A message posted at WOODWEB's Finishing Forum (4/25/22) -- Put the pickup tube upside down and figure out a setup that will produce a seal. That way ...

    Re: Moisture Content Measurements on KDAT Southern Pine
    A message posted at WOODWEB's Sawing and Drying Forum (4/25/22) -- With CCA, the difference was small enough to be ignored. The meter manufacturer sh ...

    Re: Green logs for furniture
    A message posted at WOODWEB's Sawing and Drying Forum (4/25/22) -- The slippery bark season varies with species…some have slippery bark for a few wee ...

    Re: Feedrate on Toolchange too fast, Biesse Rover
    A message posted at WOODWEB's CNC Forum (4/25/22) -- Start to change the speed of the tool, the speed between the workpiece and the tool ...

    Re: Optimizing your materials
    A message posted at WOODWEB's Finishing Forum (4/25/22) -- you can buy a hopper assembly for your AAA system so you can spray smaller quantities. ...

    Re: dovetail bits
    A message posted at WOODWEB's Cabinetmaking Forum (4/25/22) -- Here's a link to a video I made of how I setup the machine. ...

    Re: flood damaged walnut moldings
    A message posted at WOODWEB's Architectural Woodworking Forum (4/25/22) -- thank you the acid worked like a charm ...

    Re: dovetail bits
    A message posted at WOODWEB's Cabinetmaking Forum (4/25/22) -- Yup, I think the casts are all the same too. ...

    Re: router vs shaper
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- This mainly depends on the nature of your work and what type of work you are planning to ...

    Design of new paintshop?
    A message posted at WOODWEB's Finishing Forum (4/25) -- We are about to convert 600 - 800 sft into a new paintshop with one dry filter spray booth. W ...

    Re: Cabinet backs and box construction
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- quick trim, Imagine taking a piece of 1/2" ply. Shooting it down every 4" with ...

    Re: New Construction Trim Installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/25) -- I enjoyed being the closer on many million dollar homes. Trim install ...

    Re: Removable Avery Labels 5366
    A message posted at WOODWEB's CAD Forum (4/25) -- Can’t help but n the Avery labels, but we switched to vinyl labels from Able Label. They stick real ...

    Re: Design of new paintshop?
    A message posted at WOODWEB's Finishing Forum (4/25) -- Think about the sizes of the parts. The flow paths to get them from the prep/sanding room to ...

    Re: Cabinet backs and box construction
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- We use 3/4” back with a blind dado. Yes they are a bit heavier. There isn’t much of a pri ...

    Re: Design of new paintshop?
    A message posted at WOODWEB's Finishing Forum (4/25) -- Also think about make up air for your booth ...

    Re: Cabinet backs and box construction
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Bingo. ...

    Re: Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/25) -- Anonymous- was Covid-19 confirmed with testing? I do know a lot of people, incl ...

    Re: Spraying latex with CAT pump
    A message posted at WOODWEB's Finishing Forum (4/25) -- Why not just tell him you'd be glad to spray the work but he just has to give you the color/f ...

    Spraying latex with CAT pump
    A message posted at WOODWEB's Finishing Forum (4/25) -- I have a CAT pump 14:1 with the cougar gun I don't spray full time,I'm more of a cabinet inst ...

    Re: Springback Formula For Arched Jambs
    A message posted at WOODWEB's Architectural Woodworking Forum (4/25) -- Gary, I apologize for the delay in seeing this thread. Now that I'm retired I ...

    Re: Router Jig
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- Maybe the North Bennett St School taught him to prepare his work flat so the jig d ...

    Re: Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/25) -- The real problem with this economy is that the businesses that go under are not ...

    Re: Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/25) -- A few facts as I see them: The mortality rate is around 0.5% We will reach herd ...

    waterfall edge clamp
    A message posted at WOODWEB's Furniture Making Forum (4/25) -- Has anyone tried using the granite suction cup clamps for a wood waterfall edge glue u ...

    Re: Spraying latex with CAT pump
    A message posted at WOODWEB's Finishing Forum (4/25) -- @MarkB Thanks for your reply Of course I can have my paint tech to match the color in a solve ...

    Re: Router Jig
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- I get dead perfect off a Keller every single time. The template is adjusted to the ...

    Re: Spraying latex with CAT pump
    A message posted at WOODWEB's Finishing Forum (4/25) -- In my opinion, latex paint in the kitchen will give you a definite call back. Not great aroun ...

    Re: Modified overlay question
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- D Brown We do a 11/16" overlay with a 1 1/2" frame giving us a 1/8" gap I ...

    Re: Springback Formula For Arched Jambs
    A message posted at WOODWEB's Architectural Woodworking Forum (4/25) -- So I completed my arched jamb and by a hunch I over-bent it by 3/16". Af ...

    Re: Adjusting wide belt sander bed
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- Are you saying its slightly off or about 1/4" off? If slightly off our 36&quo ...

    Re: waterfall edge clamp
    A message posted at WOODWEB's Furniture Making Forum (4/25) -- I make cauls with a cleat cut to 45 degrees. One of each gets clamped to the top with ...

    Re: Single phase industrial unit
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/25) -- Dont forget to count total amps. ...

    Re: Dying pva
    A message posted at WOODWEB's Adhesives Forum (4/25) -- i dye PVA all the time with transtint. works perfectly. ...

    Re: Inventor and manufacturing
    A message posted at WOODWEB's CNC Forum (4/25) -- As noted above if Inventor is the path you are looking at check out Woodwork for Inventor addon. th ...

    Need Help With T&G Pattern Gate
    A message posted at WOODWEB's Architectural Woodworking Forum (4/25) -- Hello All, I am hoping I could get some input as to best way to fabricate the ...

    Re: Stretch wrap
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- The key to having it work is everything is evenly bundled. It won’t suck a loose, messy b ...

    Humidor cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Hello all. I just got a job that has a large humidor cabinet in it, roughly 6’ tall by 3’ ...

    Re: Need Help With T&G Pattern Gate
    A message posted at WOODWEB's Architectural Woodworking Forum (4/25) -- I'm afraid that if I understand you correctly, that when the wind blows causi ...

    What is throat seal oil?
    A message posted at WOODWEB's Finishing Forum (4/25) -- We have 3 AAA spray pumps (all CA Technologies) and they need the small cup to remain filled ...

    Re: First Coat with Agualente, then a Latex Paint Topcoat?
    A message posted at WOODWEB's Finishing Forum (4/25) -- A latex is just the dispersion of a non-water soluble phase in water. Latex paint uses a disp ...

    Re: drying bamboo
    A message posted at WOODWEB's Sawing and Drying Forum (4/25) -- The bamboo was done 2-3 weeks ago. Finished it off at 130 degrees. We just dead piled ...

    Re: chipbreaker vs ruffer?
    A message posted at WOODWEB's CNC Forum (4/25) -- A ruffer will usually out run on feed rate vs a Chipbreaker. A Chipbreaker will usually give a litt ...

    Re: Stretch wrap
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- It arrived today and its the exact same as i had been getting from Amazon except the Good ...

    Re: What is throat seal oil?
    A message posted at WOODWEB's Finishing Forum (4/25) -- It is not mineral oil, it is a resin called Dioctyl Phthalate, which means it compatible with ...

    Re: Collecting hours
    A message posted at WOODWEB's Business and Management Forum (4/25) -- Hey, my company tried a couple of time tracking software and for now, the easie ...

    Re: What is throat seal oil?
    A message posted at WOODWEB's Finishing Forum (4/25) -- fwiw, i use mineral oil as it is an inert oil most will probably disagree but i have never ha ...

    Re: Stretch wrap
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Derrek How tight does is go? Is it adjustable? I can defiantly see it for shelves or flat ...

    Re: Finishing birch credenza
    A message posted at WOODWEB's Finishing Forum (4/25) -- Why don´t you try water based self sealer? It looks great in this wood Good luck ...

    Re: Stretch wrap
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- **Meant to say it is the exact same as i had been getting from ULINE. ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/25) -- Alan F, Sorry but a bit of this is conjecture on all of our parts. Of course th ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/25) -- Alan, We do the exact same thing. We recently completed a two story commercial ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/25) -- Mark, Measure twice, cut once. We had a similar situation the other day we prov ...

    Re: Edgebander Temperature
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- We determine our required glue temperature in the following way. Has always worked for us ...

    Re: What glue for LongLeaf Heart Pine?
    A message posted at WOODWEB's Adhesives Forum (4/25) -- In every event where I could feel the joint on a butcher block or similar glue-joint, I was c ...

    Old Style Lazy Susan European Hinges Needed
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Hi, I've got a customer who is wanting me to replace all of the European concealed hinges ...

    Re: Alphacam/Cabinet Vision/Onsrud Router
    A message posted at WOODWEB's CNC Forum (4/25) -- Mike, Your choices that make sense are to either find someone in your area that can show you the ro ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Castle is definitely better. If you are serious about using pocket screws, I would look a ...

    Refinishing End Table
    A message posted at WOODWEB's Finishing Forum (4/25) -- I just recently refinished a Lane end table. I took down to the wood, sanded, put stain on an ...

    grease
    A message posted at WOODWEB's CNC Forum (4/25) -- I have 6 Busellato cnc routers. Scm has stopped carrying there red grease that we have been purchas ...

    Re: Onsrud Routers
    A message posted at WOODWEB's CNC Forum (4/25) -- CADCode has a MPR (WoodWop) reader. We have multiple brands of machinery, including Homag and Weeke ...

    Re: Alphacam/Cabinet Vision/Onsrud Router
    A message posted at WOODWEB's CNC Forum (4/25) -- Thanks for the input, yes training is in the works, and we are looking to start from scratch on alp ...

    Re: Onsrud Routers
    A message posted at WOODWEB's CNC Forum (4/25) -- unless onsrud has their own programming software, simple answer is no. woodwop is quite unique but ...

    Re: Old Style Lazy Susan European Hinges Needed
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Yes, the Salice 165 degee 1-1/4" overlay faceframe pie corner hinges require a 35 mm ...

    Re: Hammer Multi triplex
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Dale: Hammer Machinery is sold and serviced in the US by Felder. Give them a call. Felder ...

    Re: Old Style Lazy Susan European Hinges Needed
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Thank you, Dan and John. I appreciate your help. I will check with my Salice distributor ...

    Re: Dimples/Pimples
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/25) -- Keep the area as clean as possible including using multiple air filtrati ...

    Rough Sawn
    A message posted at WOODWEB's Sawing and Drying Forum (4/25) -- Anyone know any tips or tricks on replicating a rough sawn texture on beam and T& ...

    Re: Alphacam/Cabinet Vision/Onsrud Router
    A message posted at WOODWEB's CNC Forum (4/25) -- Maybe i can help you. Write me what you need and i will check it. ...

    Re: Refinishing End Table
    A message posted at WOODWEB's Finishing Forum (4/25) -- Does "took down to the wood" mean chemical stripper? ...

    Re: Old Style Lazy Susan European Hinges Needed
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Salice has a plate like that ...

    Re: cabinet fixings
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Probably screwed from inside the cabinets?? ...

    Re: Glues for Wood Veneer lamination in hot press
    A message posted at WOODWEB's Adhesives Forum (4/25) -- Any particular reason you are using 3mm thick veneer, other than to cut in-house? I can't ima ...

    Re: 52" Wide Double Sided Planer
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- 1) Sander can replace planer to "plane" but Planer cannot replace sander ...

    Acrylic enamel or tinted CV
    A message posted at WOODWEB's Finishing Forum (4/25) -- Back again tryin to figure out theres finishing questions with spraying. I work for a window ...

    Enlarging hole for bigger led spot
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- We built this bedroom wall with mall led spits in the walnut veneer soffit. These lights ...

    Re: Enlarging hole for bigger led spot
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Harold: What I do in these circumstances is to have a rabbet bearing bit in one router an ...

    Lubrication for Gear Reducer
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- Last month, I build a simple solid wood machine that mimic to power feeder but abl ...

    Re: 12" Jointer/Taiwan
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- I bought a Taiwan 32" thickness Planer. a) The build up is very solid b) but, ...

    Re: Cutting straight and close
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Dan, I'm not known for my veneering prowess, but in the past I have laid two leaves to be ...

    Re: Enlarging hole for bigger led spot
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- JB Weld 5 minute epoxy is thick/controlable, fast and strong. A router guide template stu ...

    Re: double end tenoner work
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- If it is the simplest type of tenon, then screw ur 3hp plunge router (with white-s ...

    Re: Respirator
    A message posted at WOODWEB's Finishing Forum (4/25) -- Al, basically looking to stop particulate matter with the upgraded dust masks which do a grea ...

    Re: Enlarging hole for bigger led spot
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Lenox makes a arbor that you use in place of pilot bit in a hole saw. It holds the smalle ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/25) -- I'm sorry, I don't see why the compound curve? I do see a flat, plan-curve, b ...

    Mdf Groving Feed Rate In Biesse
    A message posted at WOODWEB's CNC Forum (4/25) -- PLEASE LET ME KNOW, THE FEED RATE FOR 120 MM DIA CIRCULAR BLADE 30 TEETHS 4MM THK. WHAT IS THE OPTI ...

    Re: Matching Dyed Veener--working with Dye stains
    A message posted at WOODWEB's Finishing Forum (4/25) -- Thanks for you response guys. I will into those dye stains from Lockwood. Thanks Pat. What ab ...

    Re: Biesse or Holzher Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- High gloss hot air. Don't mess around with anything else. We just bought a new bander and ...

    Re: Enlarging hole for bigger led spot
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Drill a piece of plywood with the needed hole saw size. Center the piece of plywood over ...

    Re: HSD replacement shafts
    A message posted at WOODWEB's CNC Forum (4/25) -- Thanks guys, great suggestions. Unfortunately still not resolved. Maurice, yes it is just the finge ...

    Re: Thicknessing glue-ups: planer vs. wide-belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- I bought 32" Industrial planer... and i think sander is more useful than plan ...

    Re: Straight line Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- I build my own single rip saw with Makita Circular Saw, two rollers and a 3Hp elec ...

    Re: Enlarging hole for bigger led spot
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Thanks for the idea Tony. Operating the router upside down will be a little difficult, I ...

    Re: Cutting straight and close
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Why 4" wide and why a handheld saw? Veneer sandwiched between 1/4" MDF and walk ...

    Re: double end tenoner work
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- Got it done in house with a shaper. Went faster than I thought it would. As it tur ...

    Re: CNC laser cutter for solid wood?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- I wander those solid woods with burning oils inside may burn ... even the stock ge ...

    Re: Thicknessing glue-ups: planer vs. wide-belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- For glue-up, why not 32" jointer ;). I use jointer for glue-up to ensure 100% ...

    Re: Enlarging hole for bigger led spot
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Thanks. I like your idea pat. Can't clamp it but could use 23guage nailer or double sided ...

    pricing walnut cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- I have come up with a decent pricing system for the majority of my cabinetry, most of my ...

    Re: pricing walnut cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- The cost difference in the materials is the easy part, but it only accounts for a small p ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/25) -- I only log into here once in a while now. It's cause it's a hard thing to do. I ...

    Cold Pressing Laminate With Contact Cement
    A message posted at WOODWEB's Adhesives Forum (4/25) -- Hey Guys, Does anyone have any experience with pressing laminate onto substrates such as ligh ...

    Re: pricing walnut cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- I would somewhat agree that a simple % increase may not work too well. You will have diff ...

    temporary dust pipe
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- We need to hook up a dust collector that would work for a couple of months. We have a dus ...

    Re: pricing walnut cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Since the specie can change one way is to simply estimate the board footage of solid stoc ...

    Re: Phenolic Countertop feed and speed
    A message posted at WOODWEB's CNC Forum (4/25) -- Thanks Gary. I had some more advice PM'd to be as well, and cut these last week. I wound up using a ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/25) -- I would say and agree that sexism, racism, and all the other things that are hu ...

    Re: biesse
    A message posted at WOODWEB's CNC Forum (4/25) -- Have you confirmed that whats in your magazine matched whats in the Biesse machine configuration? I ...

    Re: pricing walnut cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- You don't have a material cost category on your working estimate? You will need a higher ...

    Re: pricing walnut cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- You don't have a material cost category on your working estimate? You will need a higher ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/25) -- Also--- in our original gender thread (which btw would make any office worker c ...

    Recommended Finish for Tops on Red Oak
    A message posted at WOODWEB's Finishing Forum (4/25) -- What products are you using to get a durable finish for table top, bar top, and counter tops ...

    biesse
    A message posted at WOODWEB's CNC Forum (4/25) -- I have biesse cnc that gives me an error that the tool in the magazine does not match the cone test ...

    Re: biesse
    A message posted at WOODWEB's CNC Forum (4/25) -- as above call Biesse to walk you through 704-357-3131 It could be that the tool change was interrup ...

    Re: temporary dust pipe
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Probably be easier to do in metal, though more expensive too. You can buy a saddle type c ...

    Re: Cabinet Vision Essential Shop Drawings
    A message posted at WOODWEB's CAD Forum (4/25) -- Hello Willie.... If you click on the reports tap, then on elevations on the far left, you will get ...

    Re: temporary dust pipe
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Some may say the downside is the static electricity that's generated by fast moving dust ...

    Re: temporary dust pipe
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Even the Mythbusters tried to create a static spark in PVC pipe, and couldn't. I've used ...

    Re: Most optically clear finishes
    A message posted at WOODWEB's Finishing Forum (4/25) -- Did a kitchen 2 years ago, soft maple painted a very bright white, clear coated everything wi ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/25) -- I had to shove someone in the chest and tell him to stay away from me today. I ...

    Re: CNC
    A message posted at WOODWEB's CNC Forum (4/25) -- Can't speak for the Giben. But I have a Biesse skill 5x12 and it has been a good machine for us . C ...

    Re: Porter Cable 310 trimmer help
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Northern Tool sells an adjustable spanner wrench. I have one it works well. As long as yo ...

    Re: unique 250 door machine
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- I asked the same question of an owner a couple weeks ago, and his answer was just that: a ...

    Re: Solid Panel Cabinet Doors
    A message posted at WOODWEB's Furniture Making Forum (4/25) -- Leo and Mike, Thanks for the feedback it was exactly what I was looking for! ...

    Re: Cabinet Vision Essential Shop Drawings
    A message posted at WOODWEB's CAD Forum (4/25) -- HI Willie, I am not sure about in essential but they are available in Ultimate. ...

    Best way to lean aspan program
    A message posted at WOODWEB's CNC Forum (4/25) -- I was wounding a good book for aspan program. ...

    Re: Recommended Finish for Tops on Red Oak
    A message posted at WOODWEB's Finishing Forum (4/25) -- 2K Poly ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (4/25) -- I do mainly wood & wood veneers, so I use HPL and other materials needing CC sparingly. I ...

    Re: Starting a new company, what's most important?
    A message posted at WOODWEB's Business and Management Forum (4/25) -- Thanks CM, the trend here is definitely toward cleaner design. People like clas ...

    Re: WideBelt Sander problem....
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- Jeff, Has there ever been anything done to your rubber drum, dressed, changed out, ...

    Re: Starting a new company, what's most important?
    A message posted at WOODWEB's Business and Management Forum (4/25) -- I am partial to Biesse and Cabinetvision. You honestly need both the cnc and th ...

    Re: Staining to match
    A message posted at WOODWEB's Finishing Forum (4/25) -- Jeff, Valspar Charges $47.75 for a gallon of Stain. To do a color match they add $3.00 per ga ...

    Re: Starting a new company, what's most important?
    A message posted at WOODWEB's Business and Management Forum (4/25) -- Things you could do with a CNC Stair stringers Any arch or non rectangular shap ...

    Re: Started charging for design/bids
    A message posted at WOODWEB's Business and Management Forum (4/25) -- This is a very typical dilemma. The reality is, at some point each business ope ...

    Re: Clamp time for vac pressing….
    A message posted at WOODWEB's Adhesives Forum (4/25) -- We have a 5X10 vacuum frame press and for flat materials (no stress) 30 minutes. Could probab ...

    Re: WIDE BELT SANDER INFO
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- Mark, Are you using paper or cloth? An 80 grit belt on average is capable of remov ...

    Re: Sideboard - solid wood or plywood construction?
    A message posted at WOODWEB's Furniture Making Forum (4/25) -- I would say you need to try to better educate your client, I have run into this a few ...

    Re: Safety Speed 37" wide belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- One thing to consider when buying a machine made overseas is tech support and part ...

    Re: Clamp time for vac pressing….
    A message posted at WOODWEB's Adhesives Forum (4/25) -- Thanks Larry, so seems like the developing consensus is I'm wasting time leaving parts for se ...

    Pre cat over cat
    A message posted at WOODWEB's Finishing Forum (4/25) -- Hello, I recently got white lacquer, tinted white from SW. It's a catalyzed product and I spr ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (4/25) -- Hmm... This seems contrary to a thread that I saw on this site.. Wish I would have gone the o ...

    Re: contact cement spraying problem
    A message posted at WOODWEB's Adhesives Forum (4/25) -- I spray the same as Andrew as I shoot infrequently. Pressure pot may be better for daily shoo ...

    Hvlp gun
    A message posted at WOODWEB's Finishing Forum (4/25) -- I am looking for a good gravity hvlp gun to spray pre cat lacquer with. I build mostly furnit ...

    Re: Starting a new company, what's most important?
    A message posted at WOODWEB's Business and Management Forum (4/25) -- blake Do yourself a huge favor and invest in the software and a router with dri ...

    Re: Brush sander
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- In my opinion there isn't anything on the market that can touch a Robo-Tech brush ...

    Re: Bidding a LEEDS house
    A message posted at WOODWEB's Business and Management Forum (4/25) -- The COSTS YOU WILL INCURE are strictly related to the LEED standard they requir ...

    Re: Starting a new company, what's most important?
    A message posted at WOODWEB's Business and Management Forum (4/25) -- No at that price I'll be doing the driving. Do the $35k machines just produce l ...

    Re: Staining to match
    A message posted at WOODWEB's Finishing Forum (4/25) -- Joe, you can trust me, they charge you. Don't think you aren't paying for that service someho ...

    Re: Hvlp gun
    A message posted at WOODWEB's Finishing Forum (4/25) -- I have a Binks M1G that I use on small jobs and don't want to bother flushing lines on my mai ...

    Re: Handheld Shop Orbital Sanders
    A message posted at WOODWEB's Finishing Forum (4/25) -- 6" random orbit sanders are the biggest I've seen. My guys like the low profile (electri ...

    Re: where to buy ??
    A message posted at WOODWEB's Business and Management Forum (4/25) -- We just got a quote from them for our countertop division @ 2300 or 2800 for a ...

    Re: where to buy ??
    A message posted at WOODWEB's Business and Management Forum (4/25) -- Found him,, He answered the phone on a Saturday and found his websites down sin ...

    where to buy ??
    A message posted at WOODWEB's Business and Management Forum (4/25) -- used or new plastic laminate racks.. Edwards storage has apparently gone out of ...

    Re: Matching applied molding
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- Use wood glue and finish after the moldings are applied for the best adhesion . ...

    Re: where to buy ??
    A message posted at WOODWEB's Business and Management Forum (4/25) -- 800 308 0516 or 513-451-1462 513-451-4724 fax Dennis Cook is our sales contact ...

    Melamine
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- What are some you that use melamine paying for 3/4 white and 3/4 maple? Thanks Bill ...

    Re: where to buy ??
    A message posted at WOODWEB's Business and Management Forum (4/25) -- all of their websites are down do you have the number,, Email? ...

    Re: Melamine
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- White - $23.50 per sheet, bought by unit. ...

    Re: Customer Mistake
    A message posted at WOODWEB's Business and Management Forum (4/25) -- add a filler and move on... ...

    Re: 230v motors on 208v 3phase
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- Most services have variations in power to begin with. The service into my building ...

    Re: Jamb legs
    A message posted at WOODWEB's Architectural Woodworking Forum (4/25) -- For interior legs, I agree with Bruce. When we hung 30 doors a day, we had a ...

    Re: what soft ware needed
    A message posted at WOODWEB's CAD Forum (4/25) -- You can get the KCD dxf output for about $4k then use vcarve pro or cabinetpartspro to do the nesti ...

    230v motors on 208v 3phase
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- Curious if anyone here has run 230v 3ph euro motors on a 208v . I talked with SCM ...

    Re: Using Winding Sticks To Remove Twist
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- You can get it close enough quite quickly with winding sticks straight edge sand a ...

    Re: what soft ware needed
    A message posted at WOODWEB's CAD Forum (4/25) -- Just got a cnc in January. I had been using Kcd for over 10 years and love how easy it is to use. I ...

    Re: Jamb legs
    A message posted at WOODWEB's Architectural Woodworking Forum (4/25) -- Alan - Yes, that was the logic, to aid in casing fit and install. The carpent ...

    Re: Mesquite tabletop question
    A message posted at WOODWEB's Furniture Making Forum (4/25) -- Air dried may not mean 'unstable' but it does often mean 'not as stable as kiln dried' ...

    Re: Mesquite tabletop question
    A message posted at WOODWEB's Furniture Making Forum (4/25) -- Thanks guys for the advice. What I'm going to do is laminate the 1/4" slabs to bo ...

    Re: Solid Surface Shop
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/25) -- If you were to set up your own solid surface shop from scratch what tool ...

    univer feeder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/25) -- Hello, I have an 1989 viintage Univer 3 wheel 3 phase feeder. I am wanting to know ...

    Re: Proper grain orientation when face gluing solid boards into thicker par
    A message posted at WOODWEB's Furniture Making Forum (4/25) -- It is common to laminate stiles & rails for interior/exterior doors. 3 piece lamin ...

    Re: Jamb legs
    A message posted at WOODWEB's Architectural Woodworking Forum (4/25) -- David, didn't the bevel make installing the casing simpler in the field and a ...

    Re: mdf/particle to wood edge glue bond strength?
    A message posted at WOODWEB's Adhesives Forum (4/25) -- JeffD is spot on in his remarks. The simpler solution is to use 1" poplar as your framin ...

    Re: Stainless Steel to Partical board
    A message posted at WOODWEB's Adhesives Forum (4/25) -- We also do a lot of this. The heat from lights is a no win situation. The metal moves a lot c ...

    Re: 20mil vs 10mil
    A message posted at WOODWEB's Veneer Forum (4/25) -- Rich: Not match: As in inconsistent color, aka the butcher block look. People (not all) like the ...

    Re: 20mil vs 10mil
    A message posted at WOODWEB's Veneer Forum (4/25) -- Hmmm, I agree in general that more info better questions better answers. However when the questi ...

    Re: L brackets
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/25) -- I just happened to come across some yesterday on the Fastcap website. ...

    Re: Tool Info Review
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/25) -- for a $120, who cares. Try it and find out. I'm sure it will do somet ...

    Re: 20mil vs 10mil
    A message posted at WOODWEB's Veneer Forum (4/25) -- Either way. I ordered the 20 mil. The veneer is a pathetic 1/42" Thanks for the insight ...

    Re: Thinking of Andi Selex full line.
    A message posted at WOODWEB's CNC Forum (3/25/25) -- There are numerous considerations when determining the linear cutting speed, a cnc can effective ...

    Re: Entry door staves/ tenons method
    A message posted at WOODWEB's Architectural Woodworking Forum (3/25/25) -- Yeah, it has all the "no no's". But it is a historic house, ever ...

    Re: Entry door staves/ tenons method
    A message posted at WOODWEB's Architectural Woodworking Forum (3/25/25) -- I would avoid loose tenons at all costs.Right away, you double your joiner ...

    Wood copy lathe
    A message posted at WOODWEB's Architectural Woodworking Forum (3/25/25) -- Hi, I bought a 2000 centauro tc-1200 copy lathe, months ago, and know I'm ...

    Re: Passing of Gene Wengert - "The Wood Doctor"
    A message posted at WOODWEB's WOODnetWORK Forum (3/25/25) -- That is sad news. I always considered him the final word on wood issue. His knowledge an ...

    Re: CNC Bits Recommendation
    A message posted at WOODWEB's CNC Forum (3/25/24) -- Okay, I'm sure that didn't help you either. I would contact a tooling supplier for recommendatio ...

    Re: CNC Bits Recommendation
    A message posted at WOODWEB's CNC Forum (3/25/24) -- Well that was pretty much a useless response. The original question is too open ended. Kind of l ...

    Re: CNC Bits Recommendation
    A message posted at WOODWEB's CNC Forum (3/25/24) -- For MDF, Plywood, and Particle Board: Compression bits: 1/2" diameter, 2 flutes Regular bit ...

    Re: Anyone Tried Sher-wood F3 Kemvar Formaldehyde Free Coating?
    A message posted at WOODWEB's Finishing Forum (3/25/24) -- So if it is not tough enough for tables, then would you say it's about as durable as a pre ...

    Re: staining ceiling
    A message posted at WOODWEB's Finishing Forum (3/25/24) -- You can brush it without too much visible overlap, just do no more boards at a time than i ...

    Re: staining ceiling
    A message posted at WOODWEB's Finishing Forum (3/25/24) -- Use a solvent based glaze. ...

    Re: Looking For A Wood Products Manufacturer
    A message posted at WOODWEB's Value Added Wood Processing Forum (3/25/23) -- You can both enjoy top-notch games while alone guiding a professional te ...

    Cabinet door press
    A message posted at WOODWEB's Cabinetmaking Forum (3/25/23) -- I am looking to see what type of clamping methods other shops are using to clamp cabin ...

    Re: Floating shelves
    A message posted at WOODWEB's Cabinetmaking Forum (3/25/23) -- I've used it a couple of times. You have to buy the drill bit to make it work. If you ...

    Re: Cabinet door press
    A message posted at WOODWEB's Cabinetmaking Forum (3/25/23) -- I have JLT clamp, its not all that fast however it is convenient. Sometimes we have do ...

    Re: Floating shelves
    A message posted at WOODWEB's Cabinetmaking Forum (3/25/23) -- Light shelves can ve done with surface metal brackets or wood cleats. we do a lot wher ...

    CAT "F Opti" new nozzle
    A message posted at WOODWEB's Finishing Forum (3/25/23) -- Does anyone have tried the new nozzles by CA Technologies ? For air assisted airless spray ...

    Re: Cabinet door press
    A message posted at WOODWEB's Cabinetmaking Forum (3/25/23) -- I use that clamp. Glue one and put in clamp. Then glue another. The first has set enou ...

    One pass heater
    A message posted at WOODWEB's Finishing Forum (3/25/23) -- Does any one know where I can get new seals for kremlin one pass heater?I ran across one a ...

    Re: Floating shelves
    A message posted at WOODWEB's Cabinetmaking Forum (3/25/23) -- Where can these black metal brackets be bought? Those Sheppard brackets look like the ...

    Re: Floating shelves
    A message posted at WOODWEB's Cabinetmaking Forum (3/25/23) -- I just use lag bolts and then cut the heads off then drill holes in the shelf ...

    Re: Floating shelves
    A message posted at WOODWEB's Cabinetmaking Forum (3/25/23) -- Thanks Leo that’s real helpful I will check into getting me one. ...

    Re: Floating shelves
    A message posted at WOODWEB's Cabinetmaking Forum (3/25/23) -- Leo I have been looking at this type have you used them before? ...

    Re: New Tip-Over Rules
    A message posted at WOODWEB's Furniture Making Forum (3/25/23) -- More rules, just what we need... ...

    Re: Floating shelves
    A message posted at WOODWEB's Cabinetmaking Forum (3/25/23) -- . ...

    Captured back revisited
    A message posted at WOODWEB's Cabinetmaking Forum (3/25/22) -- Presented for comment here is the captured back configuration recommended us by our CN ...

    Re: Martin T17F
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25/22) -- Joe, Got parts ordered from Martin today. The main arbor nut was in stock and r ...

    cabinet parts near Concord Mass
    A message posted at WOODWEB's Cabinetmaking Forum (3/25/22) -- Have a past client that needs a bathroom vanity in Concord Mass. looking for company t ...

    Re: HSD spindle question
    A message posted at WOODWEB's CNC Forum (3/25/22) -- James, A mechanical brake? Like with brake pads? Or is it activated with a pulse of electrical c ...

    Re: Captured back revisited
    A message posted at WOODWEB's Cabinetmaking Forum (3/25/22) -- Change you're deck to back flush. That way you can eliminate the flip operation on the ...

    Re: Spraying Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (3/25/22) -- So Kevin Dunphy, did you hire the kid? ...

    Re: HSD spindle question
    A message posted at WOODWEB's CNC Forum (3/25/22) -- My HSD ATC spindle has a brake ...

    Re: Tapering Small Radius Dowel
    A message posted at WOODWEB's Furniture Making Forum (3/25) -- I spent some time at the end of the day today trying out some ideas; Thomas, the edge ...

    Re: White pine louvered shutters
    A message posted at WOODWEB's Architectural Woodworking Forum (3/25) -- We build fixed and operable louver shutters. I can only guess, but most shutt ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- The last time I had a shaper fence I was trying to replace I ended up buying a dea ...

    Re: Production shoe moulding
    A message posted at WOODWEB's Architectural Woodworking Forum (3/25) -- I remember seeing a tool that had both a flat knife and a saw blade for split ...

    Re: Tapering Small Radius Dowel
    A message posted at WOODWEB's Furniture Making Forum (3/25) -- We have made angled jigs to fit the taper we need for edge sander. Once you have the c ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- Jared, it may come to that. I actually was looking at used SCMIs and thought about ...

    Re: Tapering Small Radius Dowel
    A message posted at WOODWEB's Furniture Making Forum (3/25) -- There Are some clever ways of tapering dowels on YouTube. One guy makes a jig and does ...

    Re: Production shoe moulding
    A message posted at WOODWEB's Architectural Woodworking Forum (3/25) -- Wadkin 5 head. Over a 100k linear feet per month. ...

    Re: Tapering Small Radius Dowel
    A message posted at WOODWEB's Furniture Making Forum (3/25) -- Image didn't link correctly, trying again. ...

    Re: Light weight MDF
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Leo hit the nail ...

    Re: COVID19: An Open Letter To Our Woodworking Partners
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- I am in Michigan and our Governor issued a Stay at Home order Monday. On the State Web si ...

    Thick Lumber Live Edge Workshop
    A message posted at WOODWEB's Forestry Forum (3/25) -- The Wood Education and Resource Center of Princeton, WV is hosting a one day workshop on Thick ...

    Re: COVID19: An Open Letter To Our Woodworking Partners
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Im fearful the construction industry could take a hit on this one if it doesnt blow over/ ...

    Re: Giben G65 with G57 software
    A message posted at WOODWEB's CNC Forum (3/25) -- Head cuts are designated as 2 Rip cuts are designated as 3 Cross cuts are designated as 4 W cuts ar ...

    COVID19: An Open Letter To Our Woodworking Partners
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- To our customers and industry partners: Salice America understands the uncertainties plac ...

    Re: Secondary Software for drawing/nesting cabinet parts
    A message posted at WOODWEB's CNC Forum (3/25) -- Router Cim is the best way to go for the ease of transition of other peoples parts. I have used thi ...

    Re: COVID19: An Open Letter To Our Woodworking Partners
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- We are still open in Columbus, Ohio. Most of our front-of-house staff is telecommuting, s ...

    Re: frameless inset cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Greetings, I am having our own kitchen built right now and we have done something similar ...

    Re: COVID19: An Open Letter To Our Woodworking Partners
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Our small operation is closed for the duration. We are hiring a company to deliver some c ...

    Re: COVID19: An Open Letter To Our Woodworking Partners
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Minnesota here. The governor called for staying in place today. Construction is excluded ...

    Re: COVID19: An Open Letter To Our Woodworking Partners
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Thanks, Paul. I am quite familiar with the cabinetry produced to service the airlines in ...

    Re: Lacquer thinner on plywood
    A message posted at WOODWEB's Adhesives Forum (3/25) -- I use lacquer thinner all the time on UV plywood and never had a problem. I haven't tried to ...

    Re: Wood Epoxy
    A message posted at WOODWEB's Adhesives Forum (3/25) -- I have several furniture manufacturers that use this, no reason it can't be used for your pur ...

    Re: Giben G65 with G57 software
    A message posted at WOODWEB's CNC Forum (3/25) -- Hi Rob. OK, that makes some sense. So if I want to make a long cut first I would do: 2 full length ...

    Re: frameless inset cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Check out some "apple ply". Much higher quality ply. I believe it's maple. ...

    Re: Expanding table
    A message posted at WOODWEB's Furniture Making Forum (3/25) -- I've never done anything like this. ...

    Re: frameless inset cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Looks nice Dennis. ...

    Re: Giben G65 with G57 software
    A message posted at WOODWEB's CNC Forum (3/25) -- Yes, that should work. ...

    Re: Should I consider CNC
    A message posted at WOODWEB's CNC Forum (3/25) -- Yes, by all means you should be considering a CNC. 1. its cheaper and more reliable than an employe ...

    Beech Finishing challenge
    A message posted at WOODWEB's Finishing Forum (3/25) -- Hello, Happy Monday! I'm trying to get a finish on Beech to match a floor that has none of th ...

    precat buildup?
    A message posted at WOODWEB's Finishing Forum (3/25) -- Need the pros help once again. You guys have never failed me. Im using CA techs air assist 14 ...

    Re: Touch ups on prefinished cabinet crown joint
    A message posted at WOODWEB's Finishing Forum (3/25) -- I totally understand you wanting to get it better but i'd tread lightly with this. Once you s ...

    Re: Touch ups on prefinished cabinet crown joint
    A message posted at WOODWEB's Finishing Forum (3/25) -- Thanks Mike. I probably will leave the joint well enough alone since I don't really know what ...

    Cutting sheets for other shops
    A message posted at WOODWEB's CNC Forum (3/25) -- Any insight as to what to charge to cut sheet parts for other shops? I just did one, and feel I'm i ...

    Re: Beech Finishing challenge
    A message posted at WOODWEB's Finishing Forum (3/25) -- Hello Rich, So the bleach can prevent the gold color from coming through from the underlying ...

    Re: Light setup for color matching... anyone build one?
    A message posted at WOODWEB's Finishing Forum (3/25) -- That's helpful Mauricio, I wouldn't have thought of a neutral gray for the walls, but that ma ...

    Veneer adhesive
    A message posted at WOODWEB's Veneer Forum (3/25) -- We are looking for a new supplier for veneer adhesive. Our old supplier was National Casein, who ...

    Re: Small tool changing spindles
    A message posted at WOODWEB's CNC Forum (3/25) -- Seems like there used to be an iso25 or something like that. Colombo had them on a smaller spindle, ...

    Re: Beech Finishing challenge
    A message posted at WOODWEB's Finishing Forum (3/25) -- Traditionally, two part bleach is used to make it lighter. Very difficult to use color to lig ...

    Re: Laguna CNC
    A message posted at WOODWEB's CNC Forum (3/25) -- Thanks guys, I contacted Laguna and they wanted to charge me $180 an hour to look at it. I will be ...

    Re: Hiring: How to test applicants for strength
    A message posted at WOODWEB's Business and Management Forum (3/25) -- We had a custom shop in our town in the 1990's that was positioned to be the bi ...

    Re: Hiring: How to test applicants for strength
    A message posted at WOODWEB's Business and Management Forum (3/25) -- I've been following here with some interest; 63 and not retiring anytime soon, ...

    Re: Undermount drawer slides 1/4 or 1/2 bottoms
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- We have been using 3/8" maple veneer core ply for about 25 years. We switched, becau ...

    Re: ASPIRE CAMP 2018 AT MCGREWS
    A message posted at WOODWEB's CNC Forum (3/25) -- This is a great event for anyone that is considering getting into CNC. Jim was instrumental in help ...

    Re: Line boring or CNC boring
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- ShopBot is awesome! I’m a one man shop, been in business 20 years. Owned a ShopBot for th ...

    Re: Spray System Cleaning Lacquer Thinner Good Price
    A message posted at WOODWEB's Finishing Forum (3/25) -- Jim Clark, what brand of lacquer thinner is it for $35 a 5? I can buy cheap lacquer thinner o ...

    Spray System Cleaning Lacquer Thinner Good Price
    A message posted at WOODWEB's Finishing Forum (3/25) -- I found 5 gallon Klean Strip lacquer thinner at Home Depot on sale right now for $62. They ar ...

    Re: CAD / CAM Question
    A message posted at WOODWEB's CNC Forum (3/25) -- Better to have more capability than you immediately need, than not enough in the near future. The o ...

    Re: ASPIRE CAMP 2018 AT MCGREWS
    A message posted at WOODWEB's CNC Forum (3/25) -- Thanks Brian way too many think this is for brand specific machines, so many with Thermwoods, Stile ...

    Re: Spray System Cleaning Lacquer Thinner Good Price
    A message posted at WOODWEB's Finishing Forum (3/25) -- How do you safely store a 55 gallon drum of lacquer thinner? I had a cabinet shop neighbor wi ...

    Re: CAD / CAM Question
    A message posted at WOODWEB's CNC Forum (3/25) -- Alphacam is pretty easy to use as far as cabinetry goes, and Holzher offers a 3 day training course ...

    Re: Spray System Cleaning Lacquer Thinner Good Price
    A message posted at WOODWEB's Finishing Forum (3/25) -- I buy medium grade thinner in 55 gallon drums for $250 delivered from a solvent distributor. ...

    Re: Pricing for finishing cabinet doors
    A message posted at WOODWEB's Finishing Forum (3/25) -- I charge $100 a door 18''x30''. One sanding sealer and two coats finish. Of course I make doo ...

    Re: Recomendation on Sander + Wirebrush Machine (mid-size prodduction floor
    A message posted at WOODWEB's Finishing Forum (3/25) -- What kind of stock removal do you need and what grit belt do you want to end with. ...

    Re: Stain issues
    A message posted at WOODWEB's Finishing Forum (3/25) -- SW 'BAC' stains are muddy. IMHO. Tried them once, went back to Woodsong and Mohawk, and ICA d ...

    Re: Spray System Cleaning Lacquer Thinner Good Price
    A message posted at WOODWEB's Finishing Forum (3/25) -- I buy 5 gal for $35.00 at my local auto paint store. ...

    180° Curved Staircase
    A message posted at WOODWEB's Architectural Woodworking Forum (3/25) -- I'd like to share my experience working on a recent staircase we put together ...

    Tinting Sherwood Sealer T67F3
    A message posted at WOODWEB's Finishing Forum (3/25) -- I am working out a finishing schedule for a set of medium brown\golden colored cabinets in ma ...

    Re: Tinting Sherwood Sealer T67F3
    A message posted at WOODWEB's Finishing Forum (3/25) -- FYI... your adding a lot of steps but if that is your comfort zone then go with it. We use Sh ...

    Re: Always use metal
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- If I were designing wall hung base cabinets and had concern about the weight of the stone ...

    Re: Tinting Sherwood Sealer T67F3
    A message posted at WOODWEB's Finishing Forum (3/25) -- get away from the BAC. its BAD.. Ask about their D59 series of stain. Thats solvent reducible ...

    Re: CAT gun issue
    A message posted at WOODWEB's Finishing Forum (3/25) -- Don't replace the gun! It's completely rebuildable and not that hard to do. First call CAT's ...

    Re: Glue and Dowels
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- I don't know why your opposed to preclude dowels. We've been using them for years without ...

    Re: Just wanted to say hey, I'm new to the group
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Thanks guys. I look forward to getting to know the group. The finish on the vanity is a c ...

    Re: Tinting Sherwood Sealer T67F3
    A message posted at WOODWEB's Finishing Forum (3/25) -- As I am new to building deep colors with multiple steps, I am trying to cover all my bases.. ...

    Re: CAT gun issue
    A message posted at WOODWEB's Finishing Forum (3/25) -- Thanks for all the help guys. I did check the filters and they were ok, but Herb, you hit on ...

    Re: AutoCad vs All others
    A message posted at WOODWEB's CAD Forum (3/25) -- You could try Draftsight. They have a free version which is very similar to older versions of AutoC ...

    Re: Tinting Sherwood Sealer T67F3
    A message posted at WOODWEB's Finishing Forum (3/25) -- What (in practice) do you like more about the stain you mentioned vs the BAC? My rep just gav ...

    Re: using epoxy
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Just curious why would you use epoxy for this. TB2 is stronger than the wood itself if do ...

    Re: Used CNC
    A message posted at WOODWEB's CNC Forum (3/25) -- I will be in your area this week. We offer new and used CNC's. If you would like to meet please giv ...

    Re: AutoCad vs All others
    A message posted at WOODWEB's CAD Forum (3/25) -- We use Draftsight. It is very similar to Acadlt. Very short learning curve. ...

    Re: double end tenoner work
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- That is it? Do you have tooling? ...

    Re: AutoCad vs All others
    A message posted at WOODWEB's CAD Forum (3/25) -- Do you have to keep updating it? ...

    Re: garage shop guy... am I hated?
    A message posted at WOODWEB's Business and Management Forum (3/25) -- One reason there are wide differences in prices from one shop to another, and w ...

    Re: garage shop guy... am I hated?
    A message posted at WOODWEB's Business and Management Forum (3/25) -- I use to think the same way as a garage shop was the problem but have learn ove ...

    Re: garage shop guy... am I hated?
    A message posted at WOODWEB's Business and Management Forum (3/25) -- This may be unpopular, but I like to be the devil's advocate. In full disclosur ...

    finish room lighting
    A message posted at WOODWEB's Finishing Forum (3/25) -- Hey guys, I am in the process of building my new finishing room. I picked up the booth today ...

    Re: garage shop guy... am I hated?
    A message posted at WOODWEB's Business and Management Forum (3/25) -- I run a one person shop. I started in garage 20 years ago. Five later I have a ...

    Do laminated solid wood plies move like solid wood?
    A message posted at WOODWEB's Furniture Making Forum (3/25) -- This is a question about seasonal movement. I am designing a cabinet for a client in M ...

    Re: garage shop guy... am I hated?
    A message posted at WOODWEB's Business and Management Forum (3/25) -- I'm not sure I understand the attitude that equates a small, at home shop with ...

    Weak hanging rail
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- I've searched but no success. We have been using steel hanging rail and cabinet suspensio ...

    Re: Priming Poplar Wood Trim
    A message posted at WOODWEB's Finishing Forum (3/25) -- I think I've got it figured out. I will make a rack leg out of 2x4's and drill a 1.125" ...

    Pull out spacers.
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Hello All I'm trying to come with a better solution for pull out spacers on inset cabinet ...

    Re: Pull out spacers.
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Flush the side panel to the inside edge of the frame, on finished ends this means 2 end p ...

    Re: garage shop guy... am I hated?
    A message posted at WOODWEB's Business and Management Forum (3/25) -- Price is my only real advantage on bigger shops. I usually pass on jobs that ha ...

    Re: garage shop guy... am I hated?
    A message posted at WOODWEB's Business and Management Forum (3/25) -- Quality is in the eye of the customer. If he is happy and pays what you want he ...

    Re: First cnc (hopefully)
    A message posted at WOODWEB's CNC Forum (3/25) -- We have an onsrud mate. We purchased it about 1 1/2 years ago. We looked at a number of different o ...

    Re: I was right all along. Woodworking shop owner=%20lack of education+ horri
    A message posted at WOODWEB's Business and Management Forum (3/25) -- Man I'm having a hard time. Is that an okay thing to say out loud? I think this ...

    Re: garage shop guy... am I hated?
    A message posted at WOODWEB's Business and Management Forum (3/25) -- Dave Nauman makes a very good point. There are probably a lot more junk cabinet ...

    Re: garage shop guy... am I hated?
    A message posted at WOODWEB's Business and Management Forum (3/25) -- At the end of the day the quality of the works is what is the most important th ...

    Re: Curts Thumb
    A message posted at WOODWEB's Business and Management Forum (3/25) -- I mean this with a sense of Humor .... "I just couldn't get behind support ...

    Re: Filing edges on laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/25) -- Lamello makes a nice little laminate trimmer with a horseshoe base so yo ...

    corian rye adhesive color
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/25) -- does any one know the corian epoxy color that matches corian rye? i can ...

    Re: garage shop guy... am I hated?
    A message posted at WOODWEB's Business and Management Forum (3/25) -- Often wondered about all the one man shows on business and management forum. To ...

    Re: garage shop guy... am I hated?
    A message posted at WOODWEB's Business and Management Forum (3/25) -- Okay Ray. I'll bite! Please do elaborate on why a one man shop does not have a ...

    Re: Pull out spacers.
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Google Tenn-Tex Plastics. They make an adjustable pilaster system that should work for yo ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (3/25) -- How do you get UV light in the joint? If it cures in one second you can't expose it and then ...

    Re: Portfolio
    A message posted at WOODWEB's Business and Management Forum (3/25) -- "Best"?? I think I got a couple of poor quality photos once or twice! ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (3/25) -- Good point Larry, I can hardly wait for the answer. Mark ...

    Re: Portfolio
    A message posted at WOODWEB's Business and Management Forum (3/25) -- Exactly and precisely; why do you want to know ? ...

    Re: Pull out spacers.
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Here's how we set the side boxes: ...

    Re: Trouble Ripping 6/4 Soft Maple
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- That is a lot of info. I only use about 6,000 bf a year. I buy my lumber from 3 di ...

    Re: Trouble Ripping 6/4 Soft Maple
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- I think that David has the main issue identified correctly...casehardening stress ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/25) -- You should not have more than 3% honeycomb in oak, so you comments about 20% indicate that th ...

    Re: Trouble Ripping 6/4 Soft Maple
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- I would look to the lumber. If other species rip OK, but the Maple binds, it is dr ...

    Re: Trouble Ripping 6/4 Soft Maple
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- "Note that growth stresses will show up when sawing lumber in that the green ...

    Re: Started charging for design/bids
    A message posted at WOODWEB's Business and Management Forum (3/25) -- I've tried charging for design with poor results. The idea scares people off ri ...

    Edgebanders with no Buffers
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- I'm looking for a little advice. We've recently purchased a small Cehisa Pro-7 Edgebander ...

    Re: Changing dye color under finish
    A message posted at WOODWEB's Finishing Forum (3/25) -- Bart, I don't see it that way. Toners allow you to sneak up on the color, just like you can d ...

    Re: Trouble Ripping 6/4 Soft Maple
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- " Put these two pieces back together (minus the saw kerf). If there is stress ...

    Re: Insulated Glass spacer blocks
    A message posted at WOODWEB's Architectural Woodworking Forum (3/25) -- Tyler, If your IG units are sealed with hot-melt, then they require a spacer ...

    Re: Trouble Ripping 6/4 Soft Maple
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- 5HP with a 10-12" blade (the smaller the blade the more power you'll have) sh ...

    Re: Started charging for design/bids
    A message posted at WOODWEB's Business and Management Forum (3/25) -- You are always going to do better if you give the customer what THEY rather tha ...

    Insulated Glass spacer blocks
    A message posted at WOODWEB's Architectural Woodworking Forum (3/25) -- Are insulated glass spacer blocks necessary in true divided lite double hung ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/25) -- You mention the honeycomb in 8/4 Oak, and that is a drying problem. It stands to reason (mayb ...

    Re: Trouble Ripping 6/4 Soft Maple
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- I agree that most likely you just don't have enough power. Are you planing first? ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/25) -- Others know better than I, but I believe the honeycomb is a defect of the drying process, in ...

    Re: Changing dye color under finish
    A message posted at WOODWEB's Finishing Forum (3/25) -- Right Pat. That goes without saying. I've used lots of transtint. For Andrews situation you w ...

    Re: Hindered Amine light stabilizer, where to find.
    A message posted at WOODWEB's Finishing Forum (3/25) -- Thank you for the info. On the source for the HALS. I was told that it can be reduced in a so ...

    Re: Started charging for design/bids
    A message posted at WOODWEB's Business and Management Forum (3/25) -- Fortunately We are busy enough that design involvement is something I can be se ...

    Re: Trouble Ripping 6/4 Soft Maple
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- Thanks for the reply's. Yes it is all planed flat to final thickness first and cut ...

    Re: Clumsy beginnings, clumsy growth spurts.
    A message posted at WOODWEB's Business and Management Forum (3/25) -- Whhhat!!! Puzzle making business!!! Very nice. I've concocted an image of your ...

    Bandsaw power feed
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- We do quite a bit of resawing of 1/8" veneer for custom doors on our 20" ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/25) -- David I dread whenever I get an order for oak. Probably 20% of the 8/4 shows signs of honey c ...

    Trying to find comparable item
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Im trying to find a lazy susan swivel that will hold at least 5-600lbs, is ball bearing a ...

    Re: carving tools
    A message posted at WOODWEB's CNC Forum (3/25) -- you can use both either way. tapered ballnose bits will give a little "slope" in the wall ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/25) -- Thanks to all for your comments. This has happened before as I said particularly with oak and ...

    Trying to find cheap red oak onlays like picture
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Im refinishing this kitchen set And i want to replace these onlays with red oak like pic. ...

    Re: what kind of wood is this
    A message posted at WOODWEB's WOODnetWORK Forum (3/25) -- Seriously dave this scrap pallet wood produced me like 400 dollars in 3/4×2×3 foot pieces o ...

    Re: hinge for flip up bench
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- You probably want a toy box lid hinge. Most distributors of cabinet hardware carry such a ...

    Re: Torrification
    A message posted at WOODWEB's Architectural Woodworking Forum (3/25) -- Bingaman lumber in Kraemer Pa processes this product. I don't see why it can' ...

    Re: carving tools
    A message posted at WOODWEB's CNC Forum (3/25) -- Thanks Jim. I'm using Alphacam, so I don't think there will be an issue. I'm guessing the tapered b ...

    Re: Trouble Ripping 6/4 Soft Maple
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- Here is a copy of pp. 101-102. http://www.woodweb.com/knowledge_base/Techniques_fo ...

    UBC Logo
    A message posted at WOODWEB's CAD Forum (3/25) -- This is a real long shot. Does anyone have a clean .dxf of the UBC logo? Our local wants us to buil ...

    UBC Logo
    A message posted at WOODWEB's CNC Forum (3/25) -- Greetings, The local here has asked us to build a table with the UBC logo inlayed into it. Anyone o ...

    Re: Business PlanExample
    A message posted at WOODWEB's Business and Management Forum (3/25) -- Hey John! Thanks for the straight-forward response. That does make sense. Cheer ...

    Re: Edgebanders with no Buffers
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- I should have mentioned, the project I'm speaking of is 0.5mm PVC on melamine ...

    Re: Trouble Ripping 6/4 Soft Maple
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- Here is a link at WoodWeb about equalizing and conditioning lumber ...

    Re: UBC Logo
    A message posted at WOODWEB's CAD Forum (3/25) -- I searched for an .EPS and was able to find one easily. Of course you need software that will open ...

    Re: what kind of wood is this
    A message posted at WOODWEB's WOODnetWORK Forum (3/25) -- Ya wood tends to come from trees lol but a species would be nice to know ...

    Re: Wrong locking clips for tandem tip ons
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- We have been using the new ones also ...

    Re: what kind of wood is this
    A message posted at WOODWEB's WOODnetWORK Forum (3/25) -- Seriously? Its cheap spruce form a pallet it looks like. ...

    Re: UBC Logo
    A message posted at WOODWEB's CAD Forum (3/25) -- http://www.brandsoftheworld.com/logo/ubcja Common vector file for sign people. ...

    Re: what kind of wood is this
    A message posted at WOODWEB's WOODnetWORK Forum (3/25) -- How about a picture of it length wise, may help. ...

    what kind of wood is this
    A message posted at WOODWEB's WOODnetWORK Forum (3/25) -- Can anyone tell me what kind of wood this is ...

    what kind of wood is this
    A message posted at WOODWEB's WOODnetWORK Forum (3/25) -- Can anyone tell me what kind of wood this is ...

    Re: what kind of wood is this
    A message posted at WOODWEB's WOODnetWORK Forum (3/25) -- Looks like tree wood to me. ...

    Re: Large Jobs in Microvellum
    A message posted at WOODWEB's CAD Forum (3/25) -- Thanks Gary ...

    Re: Devilbiss air-caps
    A message posted at WOODWEB's Finishing Forum (3/25) -- Yep. ...

    Re: UBC Logo
    A message posted at WOODWEB's CAD Forum (3/25) -- Try this. ...

    Re: UBC Logo
    A message posted at WOODWEB's CAD Forum (3/25) -- try this ...

    Re: Custom Run's - Various questions - input
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- "Are any of you operating in a market where your charging $0.20-$0.30/lf for ...

    Re: Replacing Feed Belt on Butfering Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- Dressing or grinding your conveyor belt is a normal part of routine maintenance on ...

    Replacing Feed Belt on Butfering Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- Due to a roof leak that landed on my sander (twice) I'm planning to replace the fe ...

    Re: Kiln Dry / wet and dry temperature to determine Relative Humidity
    A message posted at WOODWEB's Sawing and Drying Forum (3/25) -- to : Gene Wengert-WoodDoc Thank you Gene for your advices. I checked our drying room ...

    Scribing a loose stile
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/25) -- Have any of you ever scribed a loose stile for a wall to wall cabinet ...

    Re: Seco counters
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- Zach, You can contact Siko directly and let them know what model you are looking f ...

    Re: Finally going to build a Solar kiln
    A message posted at WOODWEB's Sawing and Drying Forum (3/25) -- I built the original kiln in 1978 but it is no longer around. Today is called the Vir ...

    Video demonstration on how I load logs onto the mill
    A message posted at WOODWEB's Sawing and Drying Forum (3/25) -- Not a great video,but it show how I'm loading my logs onto my mill without using any ...

    Microvellum 6.7
    A message posted at WOODWEB's CAD Forum (3/25) -- Still using older Microvellum. The toolbox became undocked. Can anyone help how you re-dock? MV ins ...

    Re: Scribing a loose stile
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/25) -- Tom - follow the link below - I think this article is just what you'r ...

    Re: Homemade tooth setter and other things
    A message posted at WOODWEB's Sawing and Drying Forum (3/25) -- Thanks Gene Wengert. ...

    Seco counters
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- Source for seco counters for moulder?? ...

    Re: Moulding?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/25) -- Try Blumer and Stanton.com, they have a huge online directory, if tha ...

    Re: Best relative humidity for a veneer operation?
    A message posted at WOODWEB's Veneer Forum (3/25) -- Oh. That's easy. We keep out veneer wrapped in plastic and strapped into the crate we receive it ...

    Re: conversion varnish looks slightly milky when applied in cooler weather.
    A message posted at WOODWEB's Finishing Forum (2/25/25) -- All blushing I have ever seen/had has been when spraying precat lacquer and it comes and g ...

    Re: Update on getting crap in the finish
    A message posted at WOODWEB's Finishing Forum (2/25/25) -- Mike, years ago we had same problem as what yours sounds like, taking all precautions like ...

    Re: conversion varnish looks slightly milky when applied in cooler weather.
    A message posted at WOODWEB's Finishing Forum (2/25/25) -- That said, as long as the finish has integrity (have you tested it for how easily it scrat ...

    Re: Weinig Profimat 23 Moulder - Material drifts off fence
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25/25) -- I think your feed rollers are on correctly. I think the problem is the little t ...

    Re: conversion varnish looks slightly milky when applied in cooler weather.
    A message posted at WOODWEB's Finishing Forum (2/25/25) -- Doesnt look like blush to me. Whenever i've had blush its pretty inconsistent, blotchy loo ...

    Re: conversion varnish looks slightly milky when applied in cooler weather.
    A message posted at WOODWEB's Finishing Forum (2/25/25) -- Here are a few pics. The problem wood finish is the piece in the middle, control samples t ...

    Finishing shops in the Seattle -Tacoma-Olympia area?
    A message posted at WOODWEB's Finishing Forum (2/25/25) -- As indicated in my other thread, we are having problems with our current finisher and I ha ...

    Freelance programer
    A message posted at WOODWEB's CNC Forum (2/25/25) -- Please Help. I am in the process of buying a Laguna CNC to build rifle stocks. I am looking for ...

    Re: conversion varnish looks slightly milky when applied in cooler weather.
    A message posted at WOODWEB's Finishing Forum (2/25/25) -- Check the edges to see if they have white haze or are they good/clear. Just hold the edge ...

    Re: October 2024 Housing report
    A message posted at WOODWEB's Business and Management Forum (2/25/25) -- Until mortgage rates go down to 6% the housing market will continue to langu ...

    Re: bits and sizes
    A message posted at WOODWEB's CNC Forum (2/25/24) -- It sounds as if vCarve Pro is a good choice to get your start. Just as using some less expensive ...

    bits and sizes
    A message posted at WOODWEB's CNC Forum (2/25/24) -- I'm new to cnc world, in fact haven't even set mine up yet, waiting on delivery. First question, ...

    Re: bits and sizes
    A message posted at WOODWEB's CNC Forum (2/25/24) -- You might want to start with a mortise compression. I use the 3flute version over 2 flute design ...

    Re: Confusing questions about finishing
    A message posted at WOODWEB's Finishing Forum (2/25/24) -- Too many questions! If someone wants a full education in finishing, I suggest they hire Ch ...

    Re: Confusing questions about finishing
    A message posted at WOODWEB's Finishing Forum (2/25/24) -- Lots of good questions. Chemmy i suggest you take the lead. ...

    Re: Custom Cabinetry and remodeling
    A message posted at WOODWEB's Business and Management Forum (2/25/23) -- I am a huge advocate of niche woodworking. After reading here for years of t ...

    Re: Maintenance cost of cnc
    A message posted at WOODWEB's CNC Forum (2/25/23) -- I’ve had 2 Biesse machines and 2 Anderson’ Selexx. The Biesse were very solid and I never needed ...

    Re: CNC cutting Aluminum panel Materials.
    A message posted at WOODWEB's Cabinetmaking Forum (2/25/23) -- Have you worked panels like that before? If you hadn't bid already, I would tell you t ...

    humidity control
    A message posted at WOODWEB's Finishing Forum (2/25/23) -- I always seem to get in a bind with my WB top coats this time of year (micro air bubbles, ...

    Lamello cantex
    A message posted at WOODWEB's WOODnetWORK Forum (2/25/23) -- Hello- Scored this lipping planer on the used market and was disappointed to find the bl ...

    CNC cutting Aluminum panel Materials.
    A message posted at WOODWEB's Cabinetmaking Forum (2/25/23) -- Hi, We are planning to cut some panels with double sided 6252 Wilsonart Matt natural a ...

    Re: Source for removable vinyl labels for Label-It software at CNC?
    A message posted at WOODWEB's CNC Forum (2/25/23) -- Abel Label makes a vinyl label that stick really good and doesn’t rip and peals off easily. Vide ...

    Re: New Sawyer w/new solar kiln needs help
    A message posted at WOODWEB's Sawing and Drying Forum (2/25/23) -- Yes, Sir I do, but for the life of me, I cannot understand the math equations. ...

    Re: gun stocks
    A message posted at WOODWEB's Business and Management Forum (2/25/23) -- I would try art for everyday in Canada. They could do much more than a blank ...

    Re: Maintenance cost of cnc
    A message posted at WOODWEB's CNC Forum (2/25/23) -- Thanks for all the great responses!! ...

    Re: Going over a nitro cellulose with a Precat
    A message posted at WOODWEB's Finishing Forum (2/25/22) -- Of course, my questions remain, as to whether anyone here has had real world, boots on the ...

    Re: Worried about warping: edge glued doors with no rails
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25/22) -- I'll chime in here as well. That front door could expand to the point that ...

    Intro to Marketing Cabinet Business
    A message posted at WOODWEB's Business and Management Forum (2/25/22) -- I do custom built-in cabinets, kitchens, railings, trim work, finish carpent ...

    Re: Hinge and Door Help for Frameless Cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (2/25/22) -- The cabinets look good from the pictures. I use Blum and Salice all the time as those ...

    Re: Edge Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25/22) -- Eric- does your machine have the belt or just the rollers on the top pressure b ...

    Re: holzher edgebander issue
    A message posted at WOODWEB's Cabinetmaking Forum (2/25/22) -- I am an electrical technician trying to troubleshoot abholzher sprint 1315 3 . 4755 , ...

    Re: Worried about warping: edge glued doors with no rails
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25/22) -- Rich is correct. Seasonal movement is more likely to be the thing you deal ...

    Re: Worried about warping: edge glued doors with no rails
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25/22) -- If the wood the doors are made from is not dry, the doors will shrink. Eno ...

    Re: Edge Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25/22) -- I have had my Uniq-s for 10+ years and can highly recommend it. I also saw Volp ...

    We Moved our shop in a week
    A message posted at WOODWEB's Business and Management Forum (2/25/22) -- After almost a year in a temporary location we moved into our new facilities ...

    Re: Cabinet Ware/Auto Cabinet Software
    A message posted at WOODWEB's CAD Forum (2/25/22) -- last line what do you need? convert from X to Y ? if so please explain what x give what you expe ...

    Re: Saw blade question
    A message posted at WOODWEB's CNC Forum (2/25/22) -- Out of my area of experience but shouldn't your tooling dealer be able to help you with this? BH ...

    Re: New spray booth: Buy a standalone building, or build new building?
    A message posted at WOODWEB's Finishing Forum (2/25) -- A professional spray booth and a make up air unit go hand in hand. I can’t comment on the bui ...

    Re: Older table saw motor stalling
    A message posted at WOODWEB's Furniture Making Forum (2/25) -- Three basic motor problems can keep a motor from starting: 1) Bad winding 2) Bad capac ...

    Hinges you can smile about!
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- I recently received some butt hinges for a job from Emtek, I was disappointed ...

    Re: Spraying over latex paint
    A message posted at WOODWEB's Finishing Forum (2/25) -- Maybe a bit low tech but I'd prime with Bin and then top coat with the latex. I've never had ...

    Re: Coating for Boards and Bowls
    A message posted at WOODWEB's WOODnetWORK Forum (2/25) -- We do an oil wax finish as well but I wpould not go with any vegetable oils whatsoever. May ...

    Re: Mayer PS9z
    A message posted at WOODWEB's CNC Forum (2/25) -- Unless they are something special your local pneumatic supplier will have an equivalent. You can pr ...

    Re: Asturo air cap/tips
    A message posted at WOODWEB's Finishing Forum (2/25) -- Thanks mastercabman. The Qualsprays look identical to my Asturo's. I sent Jeff an email. chee ...

    Re: Hinges you can smile about!
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- Everything about Brusso will make you smile, except your wallet. ...

    Re: Mayer PS9z
    A message posted at WOODWEB's CNC Forum (2/25) -- try: www.felder-group.com They are the new company that has Mayer product, service, and parts. ...

    Re: Cutting Miter fold Cove backsplash in solid surface
    A message posted at WOODWEB's CNC Forum (2/25) -- Amana makes a great insert bit. ...

    Re: Biesse bSolid or Wood CAD Cam
    A message posted at WOODWEB's CAD Forum (2/25) -- I think you compare something totally different here. BSOLID is a machine programming software from ...

    Re: Loading and Unloading CNC Router
    A message posted at WOODWEB's CNC Forum (2/25) -- I run the compression bits (outline mostly) about 2-3hrs each. Our control has a countdown timer an ...

    Re: Shopsabre IS-M series CNC
    A message posted at WOODWEB's CNC Forum (2/25) -- Yeah, I started to write you a very long response and stopped several times, but mark hit it on the ...

    Re: Ripsaw versus moulding machine for solid wood panel
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- How long did you wait before performing your test? Did you give the glue enough time to f ...

    Rangerboard MDF changing shape after cut?
    A message posted at WOODWEB's CNC Forum (2/25) -- I'm cutting parts for another shop and I've run across something I've never seen before. It's the f ...

    hvlp tilting
    A message posted at WOODWEB's Finishing Forum (2/25) -- Hello. I have stumbled upon a recommendation to reduce dry overspray landing on coated surfac ...

    Re: Particle Board Core
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- While the particle core may be just about profits, I wonder how much material ...

    pinholes vs orange peel and retardee
    A message posted at WOODWEB's Finishing Forum (2/25) -- So it seems like I always balance between slight orange peel and slight pinholes/cratering/bu ...

    Re: Bent wood laminations
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/25) -- What we do is make a band saw swing table at 19R. Poplar is fine for thi ...

    Re: Veneer Tearing Problem
    A message posted at WOODWEB's Veneer Forum (2/25) -- Phillip: It appears that you do not have a fundamental understanding of a proper veneering proce ...

    Re: Value of Komo routers at auction
    A message posted at WOODWEB's CNC Forum (2/25) -- Pat, It may have something to do with the fact that the table design takes up a LOT of space. The m ...

    Re: Rangerboard MDF changing shape after cut?
    A message posted at WOODWEB's CNC Forum (2/25) -- Here are some destructive testing results for posterity. I routed 2 rectangles 24 x 96 out of a 49 ...

    Re: Cut-Rite V9
    A message posted at WOODWEB's CAD Forum (2/25) -- In general you got 2 options. 1) Obviously you can delete from the board list of that job any board ...

    Re: Ripsaw versus moulding machine for solid wood panel
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- Hello, Thank you again for providing additional insight. The glueing environment is the f ...

    Re: Hand Hewn Fronts
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- One may be surprised at how easily this can be done with a CNC and Vectric so ...

    Re: DEVELOP CAD TO CODE
    A message posted at WOODWEB's CNC Forum (2/25) -- I wouldn't do it... The outsource guy who creates you G code probably won't pay for the crash if he ...

    Re: Ripsaw versus moulding machine for solid wood panel
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- If you would like to pursue the glue soaking in, glazed surfaces, etc. look up the link. ...

    Rusty jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- I cleaned up a Delta DJ-20 jointer about a year ago. It’s not used weekly so it ge ...

    Re: Union or having your own business?
    A message posted at WOODWEB's Business and Management Forum (2/25) -- A business owner enters into an agreement with union or any employees. If the b ...

    Re: 1/4” solid wood over and under mdf
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/25) -- You are most likely setting yourself up for failure. The math is pretty ...

    Re: Rusty jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- Once cast iron has rusted despite removing the rust, the surface remains pitted an ...

    Re: What to do with painted HeartPine Flooring to Sell
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- Sell it as-is. Or bag it in stripper. Heavy duty poly tubing from Uline. Soy Gel stri ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/25) -- Hi all, So I decided to call CP Adhesives to get some more info on their resorcinol. First, I ...

    Re: barn wood i.d.
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- Sell it as-is. Or bag it in stripper. Heavy duty poly tubing from Uline. Soy Gel stri ...

    Re: resource for basic shaper speed/feed info?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- I should add, since you asked about feed rates, experimentation is the answer. Inc ...

    Re: Union or having your own business?
    A message posted at WOODWEB's Business and Management Forum (2/25) -- Unions are generally not a benefit to the company that uses them. I have seen t ...

    Removing sharpie from raw veneer panel
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- I’m in the middle of a sequence matched wall panel job in white ash veneer. O ...

    Re: Is this American Chestnut?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- If you are a US citizen, you can send a sample to the Forest Products Lab in Wisco ...

    Re: resource for basic shaper speed/feed info?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- A little out of date but the best book on shaper operation I have seen. It include ...

    Re: Particle Board Core
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- We work with PB core doors all the time. They are actually pretty good. Merri ...

    Re: Shopsabre IS-M series CNC
    A message posted at WOODWEB's CNC Forum (2/25) -- Looking more into the required feedback when metal milling, your comments make plenty of sense to n ...

    Re: Is this American Chestnut?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- It definitely looks like it could be. Could you get a cleaner cut on the end grain ...

    Re: Ripsaw versus moulding machine for solid wood panel
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- Excuse my ignorance as I haven't run a moulder but could there be any chance of waxilit c ...

    Re: Ripsaw versus moulding machine for solid wood panel
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- If you are doing full face glue ups you need to let it dry for a few days and keep the cl ...

    Re: MV dropping dowel machining
    A message posted at WOODWEB's CAD Forum (2/25) -- Pat, I'm willing to bet that it has to do with material thickness. The two surfaces must touch, but ...

    Re: Shopsabre IS-M series CNC
    A message posted at WOODWEB's CNC Forum (2/25) -- From what I understand, the IS-M series is ShopSabre's first offering of a complete Mitsubishi cont ...

    Re: Is this American Chestnut?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- Jessica and David, Thanks so much for your responses! I'll try to get a cleaner cu ...

    Re: Particle Board Core
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- The Germans have been using panels that some question for a long time - see l ...

    Re: Rangerboard MDF changing shape after cut?
    A message posted at WOODWEB's CNC Forum (2/25) -- Not yet but I've considered it as an experiment to see if it behaves differently than the non-overs ...

    Re: Joists as stair treads
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- Cross cut to length. Skip plane high points. Joint edges. Bond with West Syst ...

    Re: simple and quick way to get a very straight cut on a live edge board
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- Froe, mallet, shooting board and plane. ...

    laminate search
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/25) -- We are trying to match a laminate of undermined age. Does anyone recogni ...

    Re: Rangerboard MDF changing shape after cut?
    A message posted at WOODWEB's CNC Forum (2/25) -- On all parts or just MDF? And do you do this to solve a particular problem? ...

    Re: Hand Hewn Fronts
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- http://www.oberflex.com/textured-wood-collection.html#references ...

    Re: Shopsabre IS-M series CNC
    A message posted at WOODWEB's CNC Forum (2/25) -- jb, yes, Bill asked about why other manufacturers don't use wincnc. ...

    Re: Rangerboard MDF changing shape after cut?
    A message posted at WOODWEB's CNC Forum (2/25) -- That and less dust in the grooves. Melamine and MDF. ...

    Re: Rangerboard MDF changing shape after cut?
    A message posted at WOODWEB's CNC Forum (2/25) -- We always cut the first pass 0.020 to 0.030 oversize. ...

    Re: Rangerboard MDF changing shape after cut?
    A message posted at WOODWEB's CNC Forum (2/25) -- Are you cutting the first pass oversize? ...

    Widebelt Sander Air Tracking Help Needed
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- Hi, I have an old 1984 model A.Costa brand widebelt sander. The sander has the air ...

    Re: Need to get into the 21st century CAD
    A message posted at WOODWEB's CAD Forum (2/25) -- Hi Scott, Interesting question. Definitely not the client. But the cabinet design and construction ...

    Reliable, simple touch-up spray gun for "in the house" touchup?
    A message posted at WOODWEB's Finishing Forum (2/25) -- Good day gents, What model/type of spray gun have you found to be most useful for moderate to ...

    Re: Brandt Optimat KD 56
    A message posted at WOODWEB's Business and Management Forum (2/25) -- That is an over current error. (Snapping the breaker.) We have a 2002 Brandt Op ...

    Re: Macassar Ebony Elevator Panels
    A message posted at WOODWEB's Veneer Forum (2/25) -- As a matter of fact I have pressed Macassar ebony on FR Pcore with a cherry reject back for elev ...

    Re: Chemcraft Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (2/25) -- I spray SW Kemvar CV and also tried Chemcraft's CV for a couple of projects and found it to b ...

    Porter Cable 310 Trim Router
    A message posted at WOODWEB's WOODnetWORK Forum (2/25) -- We have half dozen Porter Cable routers that have been sitting unused due to need for repai ...

    Re: pull outs
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- I do this often but I had been blind dovetailing the front only extending beyond the side ...

    Re: Chemcraft Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (2/25) -- The chem24, as is in its name, takes longer to cure than a conventional CV, while also giving ...

    1" overlay euro hinge
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- Is there a two piece clip type euro hinge available that will give a 1" overlay on a ...

    Re: outline breaks mortise shoulder for blind tenon
    A message posted at WOODWEB's CNC Forum (2/25) -- Gerry, Another thought. Are you climb or conventional cutting that perimeter cut out pass? Whicheve ...

    Re: Chemcraft Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (2/25) -- We use the Chemlife 24 and don't find it soft at all. Are you insuring the drying room is at ...

    Re: outline breaks mortise shoulder for blind tenon
    A message posted at WOODWEB's CNC Forum (2/25) -- BH, If I do a climb cut it leaves a rough surface on the PB and I need to come back with a conventi ...

    Machinery
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- Does anyone have any experience with a general international sliding panel saw? Model 50- ...

    Re: cordless nailer recomendation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (2/25) -- pulled the trigger on the dewalt 20v max works great i no longer need ...

    Re: Crazy Question
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/25) -- I want to suck more out of my shapers dust port since the main li ...

    Re: CNC plunging
    A message posted at WOODWEB's CNC Forum (2/25) -- Gerry, Not completely, When we sharpen a coated bit, we only sharpen inside the flute, not on the D ...

    Cabinetmaking
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- What materials are most commonly used for cabinet paint grade shaker style doors in North ...

    Re: outline breaks mortise shoulder for blind tenon
    A message posted at WOODWEB's CNC Forum (2/25) -- We inset the backs an 1/8" to leave a little more meat on the shoulder ...

    Re: pull outs
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- Why not just put a front on the roll out? There can’t be that many in a standard kitchen. ...

    Re: outline breaks mortise shoulder for blind tenon
    A message posted at WOODWEB's CNC Forum (2/25) -- Bob, That is a good idea. I will give that a try. Thanks, Gerry ...

    Re: Crazy Question
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/25) -- OK, I'll bite. Why? ...

    Ideal blades for slider & radial
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- I added a Robland Z320 slider & a 16”Delta RAS to my shop last year, and ...

    Re: Social media
    A message posted at WOODWEB's Business and Management Forum (2/25) -- I have lots Of Great Reviews on Yelp, Facebook and others. I have had a few ove ...

    Re: Board cutting yield
    A message posted at WOODWEB's CNC Forum (2/25) -- It goes both ways. The CNC does create 3 times the sawdust volume. It also creates certain yield is ...

    Dealing with runs....
    A message posted at WOODWEB's Finishing Forum (2/25) -- Hey all. I've recently started using a AAA sprayer by CA Tech. I've only been finishing for 3 ...

    Re: Dealing with runs....
    A message posted at WOODWEB's Finishing Forum (2/25) -- Jacob, Runs are usually caused by to much product as most people know , and you probably know ...

    Re: Stave core vs. 10/4
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- Laminated refers to 3 pieces of timber glued together to achieve a stable thi ...

    Re: Edgebander
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/25) -- Tadhg, I can not help you much as I know nothing about those edge ...

    Re: Solar Kiln - Ash drying questions
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- Indeed, 300 bf is best for ash to achieve the whitest color when starting with green ...

    Re: Correct glue for stile & rail doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- We were having the same problem occasionally. Then I read something I believe Leo said , ...

    Re: Solar Kiln - Ash drying questions
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- A solar kiln does not get hot enough for sterilization. Due to its poor energy effici ...

    Re: Dealing with runs....
    A message posted at WOODWEB's Finishing Forum (2/25) -- Thanks for the tips. I'll try them all. The sales rep said something like 85%transfer efficie ...

    Re: Dealing with runs....
    A message posted at WOODWEB's Finishing Forum (2/25) -- No idea what product you are spraying. Possibly work two doors at once. Spray the edges on on ...

    Re: Social media
    A message posted at WOODWEB's Business and Management Forum (2/25) -- Thanks for the response ,we will get more reviews .Also I repeat WE DID NOT WAL ...

    Re: Critique my CNC-cut box designs
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- How are you processing the cabinet bottom with the tenon cut from the outside and a dado ...

    Self loading/unloading dust collection
    A message posted at WOODWEB's CNC Forum (2/25) -- Hi all I'm planning to build an auto unloading system for my CNC. The thing that's got me stumped i ...

    Re: Heinrich's elm
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- Zelkova is actually in the elm family. The wood in the picture is most likely Zelkova ...

    Re: Solar Kiln - Ash drying questions
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- Gene, How do you get it hot enough for sterilization? This part of solar kilns has al ...

    Re: insulated carriage doors
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- These will be swinging carriage doors. I understand that the builder of the d ...

    Re: Edgebander
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/25) -- Thanks Scott never thought of that There is no info on these what ...

    Re: Case Clamp and Finished Ends
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- We do it all the time, use a clean sheet of cardboard as a cushion. As Dan said, let the ...

    Re: Correct glue for stile & rail doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- Titebond original for me. ...

    Re: First Big Wall-art: residual questions
    A message posted at WOODWEB's Finishing Forum (2/25) -- Q1. In Table 16-3 "Moisture-excluding effectiveness of various finishes" of the 201 ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/25) -- Are you being serious or sarcastic? US beef production in 2015 was about 23.7 b ...

    Re: Wire Brush Finish
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- Our Makita with the nylon head only works in softwood and does not do a heavy ...

    Re: First Big Wall-art: residual questions
    A message posted at WOODWEB's Finishing Forum (2/25) -- Thicker woods can be reasawn into two thinner boards at times. Often this is common practice. ...

    Re: Conventional vs HVLP
    A message posted at WOODWEB's Finishing Forum (2/25) -- I use 2 pressure pots for lacquer work. I fought with conversion hvlp guns starting in the ea ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/25) -- Economics 101 Where have you been? I don't have any cognitive dissonance. Where ...

    Re: First Big Wall-art: residual questions
    A message posted at WOODWEB's Finishing Forum (2/25) -- The profound movement you witnessed may not have been completely from atmospheric changes, an ...

    Re: Pivot Door Latching?
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- I am saying things like "hard to gasket" and "originated in So ...

    Re: Rosewood tabletop trim repair advice.
    A message posted at WOODWEB's Furniture Making Forum (2/25) -- Hmmm. I would assume that it was Brazilian Rosewood, based only on the age and manufac ...

    linking quantities
    A message posted at WOODWEB's CAD Forum (2/25) -- I draw my cab parts in a dxf file like the picture. Then I prepare them for the cnc in my cam packa ...

    Re: Conventional vs HVLP
    A message posted at WOODWEB's Finishing Forum (2/25) -- I agree with afinisher on both counts; the devilbiss compact with the reduced pressure/transt ...

    Re: spindle repair
    A message posted at WOODWEB's CNC Forum (2/25) -- Jim, Did you get the new core from the machine manufacturer? I just replaced one last year and was ...

    Re: More Baghouse filter area =%20more pipe velocity?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/25) -- HP is misleading. You want to know the fan curve, which will show ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/25) -- Econ, You should try reading the Wall Street Journal sometime to see what other ...

    Re: Best Finsh for Log Mantel?
    A message posted at WOODWEB's Finishing Forum (2/25) -- Thanks for the advise, I'm leaning toward the Watco oil , because I want a natural look but w ...

    Re: wolf oven installation
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- Andy I just finished a full overlay kitchen with the coffee maker and single oven below. ...

    Re: Wire Brush Finish
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- We have the Makita with the wire brush. It is not capable of achieving a &quo ...

    Re: Conventional vs HVLP
    A message posted at WOODWEB's Finishing Forum (2/25) -- Rob, to spray a toner such as your describing i use a gravity feed hvlp. Easy to dial in a sm ...

    spindle repair
    A message posted at WOODWEB's CNC Forum (2/25) -- I need to have the bearings replaced on a hsd spindle core. I just want to send out the core not th ...

    Re: More Baghouse filter area =%20more pipe velocity?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/25) -- Yes, IF the filters are a restriction (not the fan or piping) the ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/25) -- Econ 101, Still waiting to hear from you about why General Flynn was terminated ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/25) -- I am with you,, Exports of Beef from the US far equal or outsupport the US Cons ...

    Re: More Baghouse filter area =%20more pipe velocity?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/25) -- Is there a formula or rule of thumb for how much filter area per ...

    Re: linking quantities
    A message posted at WOODWEB's CAD Forum (2/25) -- If you're using acad, why could you not link a table to a spreadsheet, then format the spreadsheet ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/25) -- Econ, Why did General Flynn have to go after 24 days as National Security Advis ...

    Re: Polyester
    A message posted at WOODWEB's Finishing Forum (2/25) -- They work well for build, but you have a very short pot life. I don't even leave it in the gu ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/25) -- Unless maybe you have a different theory. Let's hear it! ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/25) -- Wasn't it something to do with working with the Russians? ...

    Re: Door Sticking
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- ^^ Agreed, outboard fence and remove about 1/16" with the sticking cutter. ...

    Re: Spraying Existing Kitchen
    A message posted at WOODWEB's Finishing Forum (2/25) -- Whoops! that was suppose to read "NOT the place start"! ...

    Ritter Part/Pneumatic Cylinder
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- I have been here before about making adjustments on my Ritter, apparently the air cylinde ...

    Torsion Box Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- My shop has a job involving a fair number of good-size doors (4'-5.5' w. x 9. ...

    Re: How it starts:
    A message posted at WOODWEB's Business and Management Forum (2/25) -- This article gives some insight. "Part II: Demographics are Now Improving, ...

    Re: Brad nailer is blowing wind
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- I have had a similar problem with the staplers we use. The best I remember on one it was ...

    Roll out shelves
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- I've always built roll out shelves for base cabinets for use with under mount slides whic ...

    Re: Powermatic 2700 shaper spindle bearing replacement
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- One thing i forgot to mention..the belt on this shaper was tighter than the 3 other 2700 ...

    Re: Kremlin pump
    A message posted at WOODWEB's Finishing Forum (2/25) -- Remove the pickup tube from the bottom of the pump. Then remove the housing above it . There ...

    Re: cnc Services pricing
    A message posted at WOODWEB's CNC Forum (2/25) -- Hi I own a carpentry and i make doors tables ... I am willing to make an investment and get a cnc i ...

    Re: How it starts:
    A message posted at WOODWEB's Business and Management Forum (2/25) -- Various sources, this one is from the Census Bureau contained in the article. A ...

    Re: insert and moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- Hi Dan: I agree with Jeff to run any of the bigger heads on the 9hp Wadkin. My gue ...

    Re: How it starts:
    A message posted at WOODWEB's Business and Management Forum (2/25) -- Another reason to read this stuff is because there are too many negative tropes ...

    Re: Looking for Manufacturer
    A message posted at WOODWEB's WOODnetWORK Forum (2/25) -- Hello we are a small log home and woodworking manufacturing company in East Tennessee and c ...

    woodwop
    A message posted at WOODWEB's CNC Forum (2/25) -- need help trying to make a flat fluted column mdf 1" thick with 5 flutes on face. I program a ...

    Re: insert and moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- After more review and measuring with a micrometer I discovered most of those that ...

    Re: Ritter Part/Pneumatic Cylinder
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- Mitch, Looking at the cylinder, that looks like a Bimba cylinder. You can verify the dime ...

    Re: Ritter Part/Pneumatic Cylinder
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- Agreed looks like Bimba. My old Ritter R46 had some Bimba cylinders, so they were being s ...

    Re: Laminate with steel
    A message posted at WOODWEB's CNC Forum (2/25) -- Be very careful with sparks if it is steel & not aluminium....... There is a formica magnetic w ...

    cnc Services pricing
    A message posted at WOODWEB's CNC Forum (2/25) -- hi all hope your having a good day i would like to ask if anyone have any idea about how to put a p ...

    Re: Textured Melamine Panels
    A message posted at WOODWEB's CNC Forum (2/25) -- I have done a few jobs with it. Cuts and holds just like any other melamine. We found we needed to ...

    Brad nailer is blowing wind
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- I have Ridgid brad nailer that just all of sudden went pop. Then it started blowing air o ...

    Re: Build your own solar kiln
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- There will be three pieces that are about 10' long--the floor, the front wall and the ...

    Re: Kremlin pump
    A message posted at WOODWEB's Finishing Forum (2/25) -- most likely some crud in lower ball ,,, sometimes the pickup hose has a crack introducing air ...

    Re: Laminate with steel
    A message posted at WOODWEB's CNC Forum (2/25) -- There are insert bits or PCD that would probably be a big help to you. Amana has a line specificall ...

    Re: hairline crack in gloss white fix?
    A message posted at WOODWEB's Finishing Forum (2/25) -- I've used tube acrylic paint. Its thick enough to fill an doesn't shrink or turn yellow. ...

    Re: log lathe
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- I see what you were saying now Dave...I thought you had a setup besides the cylinder ...

    Re: cnc Services pricing
    A message posted at WOODWEB's CNC Forum (2/25) -- It depends What kind of machine? What kind of work? Just machine time or file manipulation? ...

    Re: filling voids after primer
    A message posted at WOODWEB's Finishing Forum (2/25) -- try spackling. doesn't shrink or melt under lacquer coatings. keep it simple, ...

    Re: Laminate supplier
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/25) -- Why not call your local dealer and have them deliver or ship to you? ...

    Re: Electric eyes for Ramco Dw-900RP sander
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- try automationdirect.com ...

    Re: Laminate with steel
    A message posted at WOODWEB's CNC Forum (2/25) -- Steel or Aluminum manufacturer should have recommendations? ...

    Re: Fixed shelf / Divider
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- Thanks for the helpful responses ...

    Re: woodwop
    A message posted at WOODWEB's CNC Forum (2/25) -- Gary Thanks for the input I tried that today and still no luck, ...

    Re: Laminate with steel
    A message posted at WOODWEB's CNC Forum (2/25) -- daveguru, yeah that's the stuff ...

    Re: log lathe
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- oh ok thanks. ...

    Re: KCD or eCabinets?
    A message posted at WOODWEB's CAD Forum (2/25) -- We use KCD. KCD cant really be beat for the speed at which you can draw, quote, cutlist, and nest a ...

    Satin Finish
    A message posted at WOODWEB's Finishing Forum (2/25) -- I had to put a clear coat over some doors with wb paint on them. I used Minwax polycrylic sat ...

    Gang Ripsaw Adjustment
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- Hi, I've got a 1995 model Newman Whitney KF-24 gang ripsaw. I recently had all thr ...

    Re: Satin Finish
    A message posted at WOODWEB's Finishing Forum (2/25) -- Rich, You're right, I think a lot of my original problems were laying on the polycrylic too t ...

    Re: wide planer advice sought
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- There are some really good older planers available at auctions. I've got 2 old pla ...

    Re: How to deal with static build-up???
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/25) -- So I checked the machines/receptacles in question and the resista ...

    Re: AAA tip life - waterbased wood coatings
    A message posted at WOODWEB's Finishing Forum (2/25) -- any plastic or Teflon seals are totally safe evn rubber or nitrile orings in the polychem cle ...

    wide planer advice sought
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- I'm trying to learn more about extra-wide planers in view of an eventual purchase. ...

    Re: Satin Finish
    A message posted at WOODWEB's Finishing Forum (2/25) -- Does anyone think those 3M white final finishing pads would get rid of the dust nibs without ...

    Re: Satin Finish
    A message posted at WOODWEB's Finishing Forum (2/25) -- WB finish 101, never use steel wool. You'll very likely has little rust spots, and other issu ...

    Re: finishing wood top debate
    A message posted at WOODWEB's Finishing Forum (2/25) -- Regarding those long miters, think about what will happen if the countertops swell cross grai ...

    Am i being too picky
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- I just set my new jointer knives last night. When the boards are laying flat edge ...

    Re: Satin Finish
    A message posted at WOODWEB's Finishing Forum (2/25) -- I notice that in addition to the line of 3M scotchbrite pads they also have different finishi ...

    Re: cracking partially on glue line
    A message posted at WOODWEB's Furniture Making Forum (2/25) -- End cracking is text book improper moisture content wood being glued up. The ends dry ...

    Chair Blanks
    A message posted at WOODWEB's Furniture Making Forum (2/25) -- I use to buy solid wood scooped out chair seat blanks from a manufacturer in New Engla ...

    Re: KCD or eCabinets?
    A message posted at WOODWEB's CAD Forum (2/25) -- Thank you JM for your input. Definitely takes me a lot more than 10 minutes right now. Lol!!! I can ...

    Re: cracking partially on glue line
    A message posted at WOODWEB's Furniture Making Forum (2/25) -- Thanks, everyone. I didn't personally glue these up, no. It would have been a comparab ...

    Re: Visual issues in Cabinet Vision
    A message posted at WOODWEB's CAD Forum (2/25) -- There isn't a Windows Basic theme like in Windows 7, I've tried the different default and high cont ...

    Re: How to deal with static build-up???
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/25) -- Call the power company and ask them to check the lugs @ the meter ...

    Re: AAA tip life - waterbased wood coatings
    A message posted at WOODWEB's Finishing Forum (2/25) -- Thanks guys. I was sort of thinking the same thing about the solvent in an ultrasonic cleaner ...

    Re: Visual issues in Cabinet Vision
    A message posted at WOODWEB's CAD Forum (2/25) -- Years ago there was a setting, I think in Windows (most likely XP at that time) for hardware accele ...

    Re: wide planer advice sought
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- I have a 33" Extrema double sided planer with spirial heads. Had it for 7 or ...

    Re: Dining table failure
    A message posted at WOODWEB's Furniture Making Forum (2/25) -- The outer ones were driven through slots so they could move with expansion and contrac ...

    Re: classic column design guidelines
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- Hi Rich, I have used a book for years called the American Builders Companion ...

    Re: Satin Finish
    A message posted at WOODWEB's Finishing Forum (2/25) -- You could try the same sanding procedure, except rub with Scotchbrite pads instead of steel w ...

    Re: Visual issues in Cabinet Vision
    A message posted at WOODWEB's CAD Forum (2/25) -- That worked for my older Windows 7 computer, but it doesn't seem to be that easy in Windows 8 - I'v ...

    Re: live edge weeping cherry tables
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- Nice wood, but I sure wished you would have used wood, or even fabricated steel for t ...

    Re: How many of you are running your shop on lean manufacturing principles?
    A message posted at WOODWEB's Business and Management Forum (2/25) -- FWIW, I'm going to be speaking at the Las Vegas show on July 24th. I'd be happy ...

    Re: General 340 drill press chuck removal
    A message posted at WOODWEB's Solid Wood Machining Forum (2/25) -- Exactly what I am trying to find out as well The manual is very limited. Please le ...

    Re: Bed design help
    A message posted at WOODWEB's Furniture Making Forum (2/25) -- One advantage of this design is on moving day. The only large piece to move is the mat ...

    Re: Satin Finish
    A message posted at WOODWEB's Finishing Forum (2/25) -- Off the gun and a polished finish will almost never look the same. Even if they are classifie ...

    Re: finishing wood top debate
    A message posted at WOODWEB's Finishing Forum (2/25) -- I agree with rich, Waterlox will stink up the inside of the cabinets for a long, long time. ...

    Re: Visual issues in Cabinet Vision
    A message posted at WOODWEB's CAD Forum (2/25) -- Mike, Did you try the compatibility mode in version 7 then change the view to Windows Basic? ...

    live edge weeping cherry tables
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- live edge weeping cherry tables 2 more winter projects ...

    Re: Scratch marks on douglas fir
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- Looks more like a glue joint than a scratch :} ...

    Re: Independent New England Biesse Tech
    A message posted at WOODWEB's CNC Forum (2/25) -- What's wrong, I own 4 Biesse products. Maybe I can help. ...

    Re: Emissions and CFM
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/25) -- The emissions would be related to CFM, (air flow.) If you don't h ...

    Re: Lost this bid. How much would you have charged?
    A message posted at WOODWEB's WOODnetWORK Forum (2/25) -- Gene, Thanks. Those were some really great ideas! And yes you're right about the second set ...

    Re: Lost this bid. How much would you have charged?
    A message posted at WOODWEB's WOODnetWORK Forum (2/25) -- Matt - I think your goal should be to charge the going rate. Too many novices spend all the ...

    Eastern Red Cedar Span
    A message posted at WOODWEB's WOODnetWORK Forum (2/25) -- I am reconstructing an old rock building that i was told was a stagecoach stop in the late ...

    Re: Lost this bid. How much would you have charged?
    A message posted at WOODWEB's WOODnetWORK Forum (2/25) -- David, You're right there's no doubt. Part of my problem stems from not knowing how long st ...

    Re: Second Log I've Cut with my Bandsawmill
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- I wasn't sure if using those big 27'' tires would work. Those wheels are 50 pounds ea ...

    Re: cutting
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- Cracking won't be your biggest problem. You will very likely have at least 5% shrinka ...

    Re: Lost this bid. How much would you have charged?
    A message posted at WOODWEB's WOODnetWORK Forum (2/25) -- Here's a link to the seller of the Fowler Shelf - DOV906. Your client shows you the pic and ...

    Re: Second Log I've Cut with my Bandsawmill
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- Very nice, consistent cutting. I've always been skeptical about using tires for bandw ...

    Re: Microvelum with RouterCim
    A message posted at WOODWEB's CAD Forum (2/25) -- Hmm....Maybe Roger Shaw is pushing Router Cim because they no longer sell Microvellum. ...

    Re: Highest Strength Glue for Laminating
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/25) -- Also smooth on ea40. its used for making bows ...

    Re: Highest Strength Glue for Laminating
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/25) -- West systems epoxy should do the trick. Ian ...

    exterior redwood door
    A message posted at WOODWEB's Adhesives Forum (2/25) -- Hi all, getting ready to build an quarter sawn old growth redwood exterior door. The door wil ...

    Re: problems of tape marks on veneer.
    A message posted at WOODWEB's Veneer Forum (2/25) -- Deepak, Try this with a wet rag and a lot of pressure; rub the areas where the tape was at, when ...

    Hardware for custom armoire
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (2/25) -- My client needs a walnut custom armoire. Can anybody recommend a supp ...

    Re: grab-bag... scrap lumber
    A message posted at WOODWEB's Value Added Wood Processing Forum (2/25) -- I have a shorts rack where people can buy individual boards up to 5' long. ...

    Re: For those of you within an open booth
    A message posted at WOODWEB's Finishing Forum (1/25/25) -- Craig, I was introduced to a chemical that you mist on your floors, walls and fixtures, us ...

    Re: Digital Marketing Agency
    A message posted at WOODWEB's Business and Management Forum (1/25/25) -- Hiring a digital marketing agency can be a great investment, especially if t ...

    Re: For those of you within an open booth
    A message posted at WOODWEB's Finishing Forum (1/25/25) -- If you are not replacing the air you exhaust in the booth with clean air from a makeup fas ...

    Re: For those of you within an open booth
    A message posted at WOODWEB's Finishing Forum (1/25/25) -- We used to spray with parts laying flat which I assume you are also doing. When we started ...

    Re: For those of you within an open booth
    A message posted at WOODWEB's Finishing Forum (1/25/25) -- This may be common sense but it's worth noting, be sure you tack the item off real good be ...

    Re: sherwin EA hydroplus
    A message posted at WOODWEB's Finishing Forum (1/25/24) -- always best thing to do is get a tech sheet from the mfg which i did for, i just googled i ...

    Exterior Door weather strip
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25/24) -- Hello all, I have been making a fair amount of exterior doors these past f ...

    Re: Drying 8/4 white oak
    A message posted at WOODWEB's Sawing and Drying Forum (1/25/24) -- Hi Jeff, Re-introducing moisture into your loading can work efectively if you can ...

    Re: I read Dave's book and made my first entry door
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25/24) -- Have you encountered any challenges or difficulties in assembling furnitur ...

    Part Labels For Nested Parts
    A message posted at WOODWEB's CNC Forum (1/25/24) -- we use Cabinet vision for nesting parts, we have just recently upgrade to a cnc we use there scr ...

    Re: Drying 8/4 white oak
    A message posted at WOODWEB's Sawing and Drying Forum (1/25/24) -- Thanks guys, the kiln manual says I can hit the load hard if air dried to < 20% ...

    Re: Drying 8/4 white oak
    A message posted at WOODWEB's Sawing and Drying Forum (1/25/24) -- Hey Jeff - Tinker with the kiln settings, make sure the air is flowing smoothly, a ...

    Re: I read Dave's book and made my first entry door
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25/24) -- Yes, certainly easier to drill, and assemble. The design is still evolving ...

    Re: Cutlists: screen vs paper
    A message posted at WOODWEB's Cabinetmaking Forum (1/25/24) -- JM, thank you. Great app! Even the free version has all that I need. ...

    Re: Housing Report - Virginia Tech - November 2023
    A message posted at WOODWEB's Business and Management Forum (1/25/24) -- Thanks for sharing! ...

    Re: Drying 8/4 white oak
    A message posted at WOODWEB's Sawing and Drying Forum (1/25/24) -- A day or two after I added the water. ...

    Re: Buffing/smoothing a painted finish
    A message posted at WOODWEB's Finishing Forum (1/25/23) -- Thanks for the input. I haven't tried the brown paper bag. I haven't been to the clients h ...

    Staining on white oak lumber
    A message posted at WOODWEB's Sawing and Drying Forum (1/25/23) -- In the recent years we have been having a growing problem with "banding" ...

    Re: Staining on white oak lumber
    A message posted at WOODWEB's Sawing and Drying Forum (1/25/23) -- This appears to be sticker stain. Here is an article explaining its cause. https:/ ...

    Re: Buffing/smoothing a painted finish
    A message posted at WOODWEB's Finishing Forum (1/25/23) -- Have you tried rubbing it with a brown paper bag? If it’s a satin finish it’s worth a try ...

    Re: bit selection for prefinished ply
    A message posted at WOODWEB's CNC Forum (1/25/23) -- Chris, We have good luck with CB on plywood. Let me know if I can help. ...

    Re: Anyone using Mirka Deros instead of air sanders?
    A message posted at WOODWEB's Finishing Forum (1/25/22) -- Kinda been covered extensively all around. On mass everything Ive read people are very hap ...

    Re: Drawer box material
    A message posted at WOODWEB's Cabinetmaking Forum (1/25/22) -- You can buy drawer side stock in 1/2", 5/8", 3/4" from several supplier ...

    Drawer box material
    A message posted at WOODWEB's Cabinetmaking Forum (1/25/22) -- I have a couple of questions, I started to build my own drawer boxes recently, I made ...

    Re: ball screw repair
    A message posted at WOODWEB's CNC Forum (1/25/22) -- Unless you are working with a small machine that uses a simple lead screw and brass ball screw n ...

    Anyone using Mirka Deros instead of air sanders?
    A message posted at WOODWEB's Finishing Forum (1/25/22) -- Currently we're using a mixture of Dynabrade and Mirka 5" air sanders and are quite h ...

    Foreign material in Particle Board
    A message posted at WOODWEB's Furniture Making Forum (1/25/22) -- Has anyone else experienced issues with particle board within the last year with fo ...

    Re: Anyone using Mirka Deros instead of air sanders?
    A message posted at WOODWEB's Finishing Forum (1/25/22) -- I'm still running my Ceros and currently added a Deos for the finish room. Both are great ...

    Panel saw stand
    A message posted at WOODWEB's Cabinetmaking Forum (1/25/22) -- We have a small SSC panel saw that we want to use on occasion to bust up full sheets. ...

    Re: Problems painting mdf v solid wood.
    A message posted at WOODWEB's Finishing Forum (1/25/22) -- Thank you for the responses. It was the mdf fibers causing the issue. Due to supply issues ...

    Re: Problems painting mdf v solid wood.
    A message posted at WOODWEB's Finishing Forum (1/25/22) -- Adam right all the dirt and dust in the pores come to the surface. It's because the clear ...

    Re: eCabinets interest seems to have faded
    A message posted at WOODWEB's CAD Forum (1/25/22) -- Gene, have you looked into, Ecabinet training, for 25 dollars ,per month, this gets you, unlimit ...

    Re: Insert Planer Knives to Solve Tearout Woes
    A message posted at WOODWEB's Solid Wood Machining Forum (1/25/22) -- A face bevel completely changed the cut on my Yates American. When it was first ...

    Re: Software Advice
    A message posted at WOODWEB's Cabinetmaking Forum (1/25/22) -- Zach, I have some experience with Global. It was overly complicated. Why not look at a ...

    Masterwood Project 327 Manuals/ANYTHING
    A message posted at WOODWEB's CNC Forum (1/25/22) -- Hi, I'm in need of a manual for a Masterwood Project 327. Along with that, I could also use any ...

    Re: Masterwood Project 327 Manuals/ANYTHING
    A message posted at WOODWEB's CNC Forum (1/25/22) -- Thank you BH Davis. I appreciate it, but I already found that piece of literature. I’ve tried Go ...

    Re: Insert Planer Knives to Solve Tearout Woes
    A message posted at WOODWEB's Solid Wood Machining Forum (1/25/22) -- I put a Hermance HelixHead on our P180 and replaced the straight knife with on- ...

    Re: Problems painting mdf v solid wood.
    A message posted at WOODWEB's Finishing Forum (1/25/22) -- How many coats are you using. Cheaper brands of mdf sometimes get a rough surface after th ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/25/22) -- Everyone else has beaten the size change to death. If you're absolutely concerned abou ...

    Re: ball screw repair
    A message posted at WOODWEB's CNC Forum (1/25/22) -- Thanks. I have tracked down a mobile ball screw service. its pricey, but I dont have to figure o ...

    Re: Problems painting mdf v solid wood.
    A message posted at WOODWEB's Finishing Forum (1/25/22) -- We spray pigmented lacquer on MDF all the time. We use a lacquer undercoater and never hav ...

    Re: Masterwood Project 327 Manuals/ANYTHING
    A message posted at WOODWEB's CNC Forum (1/25/22) -- I have a partial manual from a Masterwood project 317 we had . It on my CPU if you want it ...

    Re: Masterwood Project 327 Manuals/ANYTHING
    A message posted at WOODWEB's CNC Forum (1/25/22) -- https://wtp.hoechsmann.com/lexikon/39872/project_327 ...

    Re: Drawer box material
    A message posted at WOODWEB's Cabinetmaking Forum (1/25/22) -- I use 15mm Baltic Birch plywood with 9mm BB bottoms. ...

    Table Top and Skirt Shrinkage
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- I built a dining room table for my daughter from Poplar lumber that was approximately ...

    Re: Shaker Door Materials
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- "I figured the stiles and rails would move a lot more than the mdf panel?" This ...

    Re: Veneer ID, help please
    A message posted at WOODWEB's Veneer Forum (1/25) -- James: The last photo makes me wonder if it is even veneer, as it looks more like a solid table. ...

    Help in Kansas City Mo
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- We made a couple of tables for a customer and they neglected to include a couple of cutou ...

    Help in Kansas Ciy
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- We made a couple of tables for a customer and they neglected to include a cou ...

    Re: Table Top and Skirt Shrinkage
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- The answer to your question is yes, expect the top to expand in the summer as the rel ...

    Re: Finding out what GC's are bidding a project
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Lots of times when we bid commercial jobs, my countertop subs will let me know ...

    Re: Table Top and Skirt Shrinkage
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- Many tables are purposely built with the skirts too short to start with leaving a gap ...

    Re: Table Top and Skirt Shrinkage
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- Thank you for the prompt response and the kiln vs. air dry. I realize that the physic ...

    Re: WAGNER COBRA
    A message posted at WOODWEB's Finishing Forum (1/25) -- i have used the smaller 40-10 with no issues, i change out the hydraulic oil about once a yea ...

    Re: DRYING 8/4 SLABS
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- thanks gene. I pulled the book out of my desk and gave it a look. the mill has cut ab ...

    Re: Table Top and Skirt Shrinkage
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- Your lumber is air dried apparently. This means it has not been dried enough, and it ...

    Re: Veneer ID, help please
    A message posted at WOODWEB's Veneer Forum (1/25) -- Thanks, David & Tony, the client said she bought this pc from England and paid a pretty penn ...

    Re: Shaker Door Materials
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- We glue the panels (cabinet ply or mdf) into the stiles and rails to prevent movement of ...

    Re: MDF Door Finishing Final Coat
    A message posted at WOODWEB's Finishing Forum (1/25) -- Thanks for the info. The Advance dry time is the main issue for me and why precat was somethi ...

    Stanza Flat Line
    A message posted at WOODWEB's Finishing Forum (1/25) -- Seeking feedback on anyone using a Stanza Simple Spray 900 or 1300 model flat line finish mac ...

    Re: finish bleed through
    A message posted at WOODWEB's Finishing Forum (1/25) -- "After seeing it, it really looks great; just these few area's lightly bleeding through. ...

    Re: Veneer ID, help please
    A message posted at WOODWEB's Veneer Forum (1/25) -- Mahogany. Could be old enough to be Cuban Mahogany. Most of what you see today is Sapele or Afri ...

    Veneer ID, help please
    A message posted at WOODWEB's Veneer Forum (1/25) -- Hi all, I have been asked to repair some Furniture involved in a crash, Could use some help with ...

    Re: 5 Piece Doors
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- The matching tooling is the hang up here I think You'd be better off to run lengths of pr ...

    Wagner Cobra
    A message posted at WOODWEB's Finishing Forum (1/25) -- Seeking fedback on use of Wagner Cobra 40-25 pump on flat line finish machine. Using Wagner A ...

    Re: vinyl sealer adhesion
    A message posted at WOODWEB's Finishing Forum (1/25) -- Regarding the stain it is supposed to be able to be topcoated after 1 hour (mohawk) although ...

    vinyl sealer adhesion
    A message posted at WOODWEB's Finishing Forum (1/25) -- Hello everyone. I have adhesion issue using vinyl sealer. The wood is bare ash( no refinishin ...

    Re: Drying Red OAK 4X6 Green Wood
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- Until we had dehumidification power for the kilns (the early unit operated with Freon ...

    MDF face frames
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- framed inset cabinets. nested cnc shop...the door sits in the opening, euro hinge plate s ...

    Re: Bessey Revo vs Latest version KRE 3.5xx
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- Door shop guy, Just a follow-up to the issue with the K-Body clamps. My assum ...

    Blum tandom vs grass dynapro
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- Hi all, I have worked with Blum hardware for 20 plus years. The Grass salesman came by an ...

    Re: Clamping/securing block on large core
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- kinda what adam said. but long story short, quick dry glue with short time cl ...

    Re: vinyl sealer adhesion
    A message posted at WOODWEB's Finishing Forum (1/25) -- That oil stain can be a problem if it's not thoroughly dry. I give it several days myself. I ...

    Re: Software & controller
    A message posted at WOODWEB's CNC Forum (1/25) -- Jerry, I'd never seen the Acorn Centroid controller. That looks very promising. I kind of wish I st ...

    Re: SCM Maestro out of memory issue
    A message posted at WOODWEB's CNC Forum (1/25) -- I have not reached to Panel Mac with "large" projects because Maestro's nesting module fa ...

    Re: SS countertop software / Andi Stratos
    A message posted at WOODWEB's CNC Forum (1/25) -- Keytrix is parametric or Microvellum, Solidworks or Inventor if the first two would be killing a co ...

    Re: Drying Red OAK 4X6 Green Wood
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- Thanks Gene!!! Shoot me a link if you have it on the reference to the egyptian gluing ...

    Re: SS countertop software / Andi Stratos
    A message posted at WOODWEB's CNC Forum (1/25) -- I would think parametric would be a handy ability to have. You could setup variables for everything ...

    Re: Drying Red OAK 4X6 Green Wood
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- https://www.veneering.net/history-of-wood-veneer/ ...

    Re: Software & controller
    A message posted at WOODWEB's CNC Forum (1/25) -- I would look at Centroid Acorn contoller and Vectric Vcarve ...

    Re: Software & controller
    A message posted at WOODWEB's CNC Forum (1/25) -- why not run GRBL? ...

    Re: Box Beam Construction
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- We use a jig on the tablesaw with a fence at the angle and 2-3 DeStaCo clamps ...

    Re: Shop Pricing Strategies
    A message posted at WOODWEB's Business and Management Forum (1/25) -- A few questions 1) Do the doors cost you $1,413.00? if so why no markup? 2) Are ...

    Blum minipress
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- I recently bought a second Blum minipress that included a 7 spindle boring attachment for ...

    Re: Cabinet hinges
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- We use almost exclusively the hettich sensys with the "toolless fast assembly" ...

    Re: Bidding Multi-Unit project
    A message posted at WOODWEB's Business and Management Forum (1/25) -- I agree it will take good credit to be able to do this because more than likely ...

    Cabinet hinges
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- I am just wondering what everyone is using for cabinet hinges, by brand? And by kind, in ...

    Re: MasterCraft maple doors
    A message posted at WOODWEB's Finishing Forum (1/25) -- Maple can be tamed with the right stain. Sherwin williams wiping stain will stain it nicely. ...

    Shop Pricing Strategies
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Over the past year, I've spent a lot of time refining this excel spreadsheet th ...

    Re: Shop Pricing Strategies
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Your shop rate is $22.50/hr? That's like 1950s rate. 10% waste on labor? What's ...

    Re: MasterCraft maple doors
    A message posted at WOODWEB's Finishing Forum (1/25) -- Take a clean rag and wet it and ring it out so it is damp not soaking wet. Rub this over enti ...

    Re: Shop Pricing Strategies
    A message posted at WOODWEB's Business and Management Forum (1/25) -- 1. The doors do not have a markup. Generally, I do, but honestly I was concerne ...

    Re: Bidding Multi-Unit project
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Do you have the financing or buying power to handle this size of project? Will ...

    Poplar doors finish
    A message posted at WOODWEB's Finishing Forum (1/25) -- Hello all hope your having a productive day I am working on a project the person is on a budg ...

    Door/Drawer bumpers
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- Hello, wonder what brand/type of bumpers you guys are using for overlay cabinets, we are ...

    Re: Is there a market? Child safety latch
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Anytime I hear someone talking about making children's anything, I immediately ...

    Re: Cabinet hinges
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- 99% of our doors fit just fine, but it's nice to know going into the booth that there is ...

    Re: Blum minipress
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- Yes. It is basically a plastic bolt that threads into the bottom of the head. The bolt hi ...

    Re: Cabinet hinges
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- We have always bored and pressed the hinges in the doors after they are finished as we as ...

    Re: Best way to ease inside/outside edges of cabinet doors?
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- These work pretty well. Quick and easy. Not sure the name of it, but can be bought at woo ...

    Re: MasterCraft maple doors
    A message posted at WOODWEB's Finishing Forum (1/25) -- Can't help now unless you want to strip the doors. Even then you won't get all the color out, ...

    Re: Dishwasher panel cloudiness
    A message posted at WOODWEB's Finishing Forum (1/25) -- Make sure the end grains of the panel are finished exceptionally well. Moisture is wicking in ...

    Re: Poplar doors finish
    A message posted at WOODWEB's Finishing Forum (1/25) -- Hello, look this video from you tube. https://www.youtube.com/watch?v CGAhBSdc-sg You can use ...

    Re: cordless nailer recomendation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/25) -- Ryobi 18 gauge and Ryobi 23 gauge pin nailer The pin nailer is phenom ...

    Re: Box Beam Construction
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- The scarf is amazing for hiding the joint. I once did some maple trim around ...

    Re: Shop Pricing Strategies
    A message posted at WOODWEB's Business and Management Forum (1/25) -- My cost would be about $17,500. So I think you might be a bit low. But it reall ...

    Re: Is there a market? Child safety latch
    A message posted at WOODWEB's Business and Management Forum (1/25) -- I've never had any customer inquire about safety latches in a kitchen. I think ...

    Re: Cabinet hinges
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- Tyler, How often are you finding doors that don't fit. I'd look at how to eliminate that ...

    Re: Cabinet hinges
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- I use a hinge boring machine - 2mm bits (in 10mm sleeves, not 3/8) for screw on hinges. A ...

    Re: Cabinet hinges
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- We used to do that too Gary, until we decided the best way to do things was pre hang all ...

    Re: Is there a market? Child safety latch
    A message posted at WOODWEB's Business and Management Forum (1/25) -- We don't do kitchens for the most part, but our customers would simply tell the ...

    Re: Box Beam Construction
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- Ok, so most everyone is doing scarf joints. How is everybody doing them? Jig ...

    Re: MasterCraft maple doors
    A message posted at WOODWEB's Finishing Forum (1/25) -- you can try a stain conditioner, but generally you get what you get with maple. blotchy uneve ...

    Re: Shop Pricing Strategies
    A message posted at WOODWEB's Business and Management Forum (1/25) -- $12k before install and tax. West coast. Usually in the 30-50% percentile price ...

    Re: Website Development
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Trent, I don't know much about the closet industry. I don't know anything at al ...

    CMA to host shop tours prior to the Wood Pro Expo in Charlotte
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- The Cabinet Makers Association (CMA) is pleased to announce they will host a regional eve ...

    Re: Website Development
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Sure, DIY web development means you spend your time vs your money. Your time ca ...

    Re: Website Development
    A message posted at WOODWEB's Business and Management Forum (1/25) -- First let me address the Do It Yourself of anything. When you are a business ow ...

    Re: Breaking edges efficiently and consistently
    A message posted at WOODWEB's Solid Wood Machining Forum (1/25) -- I forgot to mention that the equipment choice should be influenced by the quantity ...

    Re: Table Top Curve/ Warp
    A message posted at WOODWEB's Furniture Making Forum (1/25) -- Your questions, answered: 1. Cross grain construction inhibiting the free movement of ...

    Re: best resaw blades
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- I use a simple set up like shown in the photo, just a set of digital verniers ...

    Re: Can't satisfy customer
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Since you are paid up (as you stated), I would offer the client one chance at a ...

    Re: Cutting with slide saw, do I need premill?
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- I would say yes. We also use a sliding table saw and it it almost impossible to make the ...

    Re: Breaking edges efficiently and consistently
    A message posted at WOODWEB's Solid Wood Machining Forum (1/25) -- Ok thanks for the advice, I'll try find someone local with a shaper who'll let me ...

    Re: Website Development
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Derek explained very well why it's just not worth the time for the DIY website. ...

    Re: best resaw blades
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- I use a 1" x 1.3 tpi on my 17" saw. It's rated up to a 1-3/8" ...

    Re: Wendel Castle Dies
    A message posted at WOODWEB's Furniture Making Forum (1/25) -- I was very sad to read this. I had the privilege to study under him for two years at t ...

    Re: Edgeing doors and fronts
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- We invested in a shape and sand machine (unique 412) about 2 years ago. One of the best i ...

    Re: Multi head moulder SOP or guidebooks
    A message posted at WOODWEB's Solid Wood Machining Forum (1/25) -- I wrote a Thru Feed Moulder Operator's Manual in 1996. It is basically an 8 day pr ...

    Re: White Glove Shipping Companies
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Call these guys , they organize all of my high end shipping . We’ve shipped who ...

    Re: Website Development
    A message posted at WOODWEB's Business and Management Forum (1/25) -- I am with cabmaker, My website at this point is nothing more than a way to find ...

    Re: Drying Black Spruce dead straight
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- Thin wood warps much more than 1" or thicker. Stickering must be perfect and top ...

    Re: Website Development
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Yes, I have done some of my own work. Im not a tech guy, and dont pretend to be ...

    Re: Table Top Curve/ Warp
    A message posted at WOODWEB's Furniture Making Forum (1/25) -- As Duster points out, the cross-grain cleat on the end is the main problem. Additional ...

    Re: D-Dur vs. M.L.Camp 2KPoly
    A message posted at WOODWEB's Finishing Forum (1/25) -- The reason some 2K's are exterior rated and others are not have to do with the properties of ...

    Re: best resaw blades
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- What are you all using for blade width? I've found that on my old 18" Lu ...

    Re: Drying Black Spruce dead straight
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- Well at last I am loading the spruce into the dry kiln (Nyle L200). Is there concern ...

    Throat Seal Lube and Fisheyes
    A message posted at WOODWEB's Finishing Forum (1/25) -- Can anyone tell me if the throat seal lube on a kremlin pump would cause fisheyes if it came ...

    Re: Building a wood fired kiln
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- Wood-fired kilns should be designed so that the flue gases do not go into the kiln, b ...

    Re: Drying Black Spruce dead straight
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- Gene are you saying that the wood may be brittle at 6 or 7%, but less so at maybe 9%? ...

    Re: Wendel Castle Dies
    A message posted at WOODWEB's Furniture Making Forum (1/25) -- I had no regard for his very early stack lamination work, it was just so bulky. But wh ...

    Re: best resaw blades
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- John, How are you checking the tension of your blade? I'm also using 1" ...

    Re: Which is the best free software for generating CNC part program?
    A message posted at WOODWEB's CAD Forum (1/25) -- The one you put together yourself, accounting for all the variables of your OS's, chips sets, desig ...

    Re: Split along the glue joint - why?
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- We have always used the pumps. The pumps clog, get stuck, loose suction, peop ...

    Re: Sealing green wood (entire board)
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- Three heavy coats of spar varnish will be a fairly good sealer. But if you seal it to ...

    Re: Grease bearings
    A message posted at WOODWEB's CNC Forum (1/25) -- It's just a push to connect fitting pull it out and try to see if it's the hose. Or remove the stop ...

    Re: Which is the best free software for generating CNC part program?
    A message posted at WOODWEB's CAD Forum (1/25) -- nanocad is 100% free,,and depending on the controller you can grab a dfx to G code generator on eba ...

    Re: Throat Seal Lube and Fisheyes
    A message posted at WOODWEB's Finishing Forum (1/25) -- I talked to a guy at Ca tech earlier. He told me there was nothing in that oil that would cau ...

    Re: Split along the glue joint - why?
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- Jamestown Dist is about 45min from our shop. They sell everything to the New ...

    Re: Split along the glue joint - why?
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- West System. We have the metered pumps for proper mixing - well worth the exp ...

    Cutting with slide saw, do I need premill?
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- Starting a new cabinet shop and getting the equipment lined up. Going to start with a nic ...

    Re: Drying Black Spruce dead straight
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- Something can be strong, but brittle, meaning it will develop large cracks, etc. So, ...

    Re: What to do with extra dust pipe
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/25) -- Skip, Was being funny but on a serious not. We need to do a coupl ...

    Re: Throat Seal Lube and Fisheyes
    A message posted at WOODWEB's Finishing Forum (1/25) -- There is no doubt that if your getting paint on the rod, oil is getting into your finish. The ...

    Re: Grease bearings
    A message posted at WOODWEB's CNC Forum (1/25) -- Thanks for all the responses guys, it's not the nipple that's blocked but the grease bearing that's ...

    Re: Primer colour.
    A message posted at WOODWEB's Finishing Forum (1/25) -- The only thing I ever paint is CNC cut MDF 1 piece doors. So ML Campbell Clawlock is the prim ...

    Re: Website Development
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Derrek, You make a lot of assumptions about how difficult it is or how much tim ...

    Re: Split along the glue joint - why?
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- Has anyone ever tried plastic resin glue? I have had good luck and no creep. ...

    Re: Grease bearings
    A message posted at WOODWEB's CNC Forum (1/25) -- Update: I know the block is at the guide rod end, I just can't get a wrench in there to unscrew the ...

    Re: Table Top Curve/ Warp
    A message posted at WOODWEB's Furniture Making Forum (1/25) -- Since the builder shows no regard for wood movement, he may have glued and screwed the ...

    Re: best resaw blades
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- We run the CT Lenox blade as well, I have also struck out finding anyone who ...

    Re: What to do with extra dust pipe
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/25) -- I've got some inventorying to do! Robb - depends what you send in ...

    Re: Grease bearings
    A message posted at WOODWEB's CNC Forum (1/25) -- Yup, push connector. It's easier to come apart if you push that sleeve in towards the fitting, then ...

    Re: Cutting with slide saw, do I need premill?
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- Edit - I'm discussing cutting laminated sheet goods ...

    Re: What to do with extra dust pipe
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/25) -- You could just send it to me. Ha! ...

    Re: Split along the glue joint - why?
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- JD ...

    Re: Hatin
    A message posted at WOODWEB's Business and Management Forum (1/25) -- The facts (which may be "alternate facts") as I see them after workin ...

    Re: Dowel Set-up
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- "My fear with injecting glue is that over time (think years) the system will get jun ...

    Done with spray stain, option B
    A message posted at WOODWEB's Finishing Forum (1/25) -- I think I've had enough with the spray stain, its easy to use on flat surface or raised panel ...

    Re: Hatin
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Pat, You are right that there are a large group of young people coming into the ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/25) -- It sounds like there wasn't enough glue or the clamping was indequate, uneven, or too late. T ...

    Re: Mdf routing
    A message posted at WOODWEB's CNC Forum (1/25) -- Antony, It sounds like you are putting A part on the CNC instead of a full sheet. If the part alrea ...

    Re: Edgebanding same as box or fronts?
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- Back in the days when I was selling kitchens there was one large company that would match ...

    Re: Hatin
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Yeah well there is always the chicken little narrative. But think about it, thi ...

    Re: Done with spray stain, option B
    A message posted at WOODWEB's Finishing Forum (1/25) -- We always pre-stained and sealed the panels before assembly whenever possible. That way if th ...

    Re: Attaching Rail/Apron to Table Top
    A message posted at WOODWEB's Furniture Making Forum (1/25) -- When you wrap a solid wood top with a border you don't allow it to expand and contract ...

    Re: Wonky cuts on diagonal???
    A message posted at WOODWEB's CNC Forum (1/25) -- Jim, used machine, big company owned so no reason for selling other than typical upgrade, machine h ...

    Re: Wonky cuts on diagonal???
    A message posted at WOODWEB's CNC Forum (1/25) -- Do you see any "bumps" around the circles that turn out as ovals? If there are imperfecti ...

    Re: Wonky cuts on diagonal???
    A message posted at WOODWEB's CNC Forum (1/25) -- Guys, Machine is a Busellato jet4 using CV integration, Pdub, my roll corners was NO, just changed ...

    Re: Wonky cuts on diagonal???
    A message posted at WOODWEB's CNC Forum (1/25) -- If the squares are dead on then I'd think it is software related. The oval shaped circles could als ...

    Re: Wonky cuts on diagonal???
    A message posted at WOODWEB's CNC Forum (1/25) -- Most machine manufacturers have either shape macros or a test cut built in to the controller. if yo ...

    door sanding
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- So I just sold my drum sander, I had to sell it as i have a very small shop and need the ...

    Re: Attaching Rail/Apron to Table Top
    A message posted at WOODWEB's Furniture Making Forum (1/25) -- Don't get discouraged, consider it a valuable lesson. I also learned the hard way...bu ...

    primer for laminate edgebanding
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- We've had issues with PL strips used for edgebanding not adhering very well. A release ag ...

    Attaching Rail/Apron to Table Top
    A message posted at WOODWEB's Furniture Making Forum (1/25) -- Here is my idea. I want to attach this 1-1/8 piece of poplar to the walnut table top ( ...

    Re: Dowel/Confirmat Assembly
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- I go 37mm back from the front edge and then try to space them evenly from there. I have a ...

    iris finishes
    A message posted at WOODWEB's Finishing Forum (1/25) -- There is a local coatings dealer nearby that has opened in a new location and now is offering ...

    Re: Sealer under 2k Poly
    A message posted at WOODWEB's Finishing Forum (1/25) -- I have used polyester many times with undermounts with nary an issue. Maintenance by the home ...

    Re: Wonky cuts on diagonal???
    A message posted at WOODWEB's CNC Forum (1/25) -- Kevin, Just tried your suggestion and at 4m per min everything is perfect, at 18m per min the circl ...

    Salice Hinges
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- Hello All Looking for a Salice hinge with 150 to 180 Deg. opening capability for a Inset ...

    Re: Best Shapers
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- For cabinet door cope i am totally happy with a Powermatic 2700 with a Weaver air tenon j ...

    Re: Attaching Rail/Apron to Table Top
    A message posted at WOODWEB's Furniture Making Forum (1/25) -- No need to worry about the apron lasting 100 years. All that solid wood inside the bor ...

    Re: Done with spray stain, option B
    A message posted at WOODWEB's Finishing Forum (1/25) -- I also forgot to ask, Im using sherwinn williams sb stain, will it evaporate the clear stain ...

    Re: primer for laminate edgebanding
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- We have been back spraying our laminate with spray grade contact cement before edgebandin ...

    Re: Best wood for shower
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/25) -- Ipe as well, we have done shower floors (elevated) with great success ...

    Re: water borne finishes
    A message posted at WOODWEB's Finishing Forum (1/25) -- Sherwin Williams sells sayerlack hydroplus. this is a fantastic coating with great dry times ...

    Re: Wonky cuts on diagonal???
    A message posted at WOODWEB's CNC Forum (1/25) -- I too, am using CV. I changed the "Roll Around..." in there and Alphacam and that took ca ...

    Re: Attaching Rail/Apron to Table Top
    A message posted at WOODWEB's Furniture Making Forum (1/25) -- Are the narrow strips in between the solid border veneer or solid wood? ...

    Re: Head Injuries from CNC frequency
    A message posted at WOODWEB's Business and Management Forum (1/25) -- What Jeff said, hearing protection. Just wear it! ...

    Re: primer for laminate edgebanding
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- Dorus makes it! We use it. Other products also work. ...

    Re: Dyeing expoxy
    A message posted at WOODWEB's Architectural Woodworking Forum (1/25) -- Mixol colorants also work well for dying epoxy. ...

    Mdf routing
    A message posted at WOODWEB's CNC Forum (1/25) -- How to avoid breaking PVC edge, on mdf panel while routing, at tool exit ...

    Re: Attaching Rail/Apron to Table Top
    A message posted at WOODWEB's Furniture Making Forum (1/25) -- It's all solid. ...

    Re: Mdf routing
    A message posted at WOODWEB's CNC Forum (1/25) -- Have you tried climb cutting? ...

    Re: Need some opinions
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Every time this topic comes up I am always somewhat shocked at how a very exper ...

    Re: Being bad mouthed by competitors
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Have you for any reason in any way done anything to be badmouthed. licenses, cr ...

    Re: Aged Wood Finish?
    A message posted at WOODWEB's Finishing Forum (1/25) -- Well, here's my two cents. I noticed that you said your potential client said "I like th ...

    Re: Being bad mouthed by competitors
    A message posted at WOODWEB's Business and Management Forum (1/25) -- You've had some very good advise here from several folk. The one statement that ...

    Re: Being bad mouthed by competitors
    A message posted at WOODWEB's Business and Management Forum (1/25) -- On thing I remembered. sometimes in a new meeting I would tell the client that ...

    Re: Wood CAD/CAM
    A message posted at WOODWEB's CAD Forum (1/25) -- IMOS and woodCAD|CAM are identical in their core programming. You are correct, in a sense, in that ...

    Re: Being bad mouthed by competitors
    A message posted at WOODWEB's Business and Management Forum (1/25) -- That is why negative advertising is so effective in political campaigns. The #1 ...

    Pewter finish
    A message posted at WOODWEB's Finishing Forum (1/25) -- Greetings All. Well the blizzard has passed, so let us spray! I have a large ( 10' H x 16' W) ...

    Fish eyes in Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (1/25) -- Fabricated 1 1/2" thick Pine tops for a kitchen. The specified finish was EZ DO wipe on ...

    Re: Being bad mouthed by competitors
    A message posted at WOODWEB's Business and Management Forum (1/25) -- May very well be jealousy on the part of the bad mouther . Build and sell on yo ...

    Re: IKEA coming to town (Small cabinet Company)
    A message posted at WOODWEB's Business and Management Forum (1/25) -- This too funny not to mention.. I'm sending two guys tomorrow to install an IKE ...

    Re: Wood CAD/CAM
    A message posted at WOODWEB's CAD Forum (1/25) -- thanks Pat. I happen to be an American that had no trouble whatsoever adapting to German logic....i ...

    Shelix cutterhead on Makita 2040
    A message posted at WOODWEB's Solid Wood Machining Forum (1/25) -- Have a Makita 2040 that must be 35 years old. I've recovered the rollers and it ru ...

    Re: Pewter finish
    A message posted at WOODWEB's Finishing Forum (1/25) -- Yes Leo, it can be T/C'd. That was what I was doing after the tinted sealer. ??? Todd. have y ...

    Re: High humidity
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- Well I guess I'm mdf's biggest proponent once again. After 25 years of serious wood finis ...

    Re: Toxic Employee
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Thanks you guys, We have seen them before and He will not be the last, Any of y ...

    Re: IKEA coming to town (Small cabinet Company)
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Matt, We are dealing with this too. They are actually going to rename the stree ...

    Re: IKEA coming to town (Small cabinet Company)
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Or custom size cabinets and doors that look like IKEA cabinets. If they are (su ...

    Re: Painted countertop substrate
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- I believe that the mdf edge is more durable in the long run than edge-banding. Several ti ...

    Re: IKEA coming to town (Small cabinet Company)
    A message posted at WOODWEB's Business and Management Forum (1/25) -- John, good idea. See if you can get IKEA to recommend you. Get the install $ an ...

    Re: Being bad mouthed by competitors
    A message posted at WOODWEB's Business and Management Forum (1/25) -- The facts are that there are people who are going to cause trouble no matter wh ...

    Re: Pewter finish
    A message posted at WOODWEB's Finishing Forum (1/25) -- Sculpt Nouveau is awesome. Takes some playing around to but the patinas really make it POP!. ...

    metal tambour
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- We are currently looking for aluminum metal tambour, that can be cut to custom sizes. Any ...

    Panel saw
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- I purchased a used holz her 1205 panel saw. I need someone to get it up and running. I am ...

    Re: Need some opinions
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Spelling and grammar are important. Doing a good job and being a responsible em ...

    Re: Panel saw
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- http://www.themachinewarehouse.com/ I am sure Johan can refer someone if he can't do it ...

    Re: Being bad mouthed by competitors
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Take James' advice. He is as successful as he can be. ...

    Re: Blum hinge installation question...
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- Thanks to all who answered. ...

    Re: metal tambour
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- try rollok The cut it for you and tension it too ...

    Re: metal tambour
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- Might try Hafele. ...

    Re: Pewter finish
    A message posted at WOODWEB's Finishing Forum (1/25) -- Can it be clear coated? ...

    Re: White conversion varnish on Louver doors
    A message posted at WOODWEB's Finishing Forum (1/25) -- I sometimes build louvered cabinet doors for local shops that are not set up for building the ...

    metal laminate(no back-smooth metal) around a large bullnose
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/25) -- Hello, I have to wrap metal laminate(chemmetal aluminum) on a 28 foot ba ...

    Re: Numbers divided by a slash? 4/4, 5/4 etc...
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- A set of standards for measurements, and grading rules are maintained by the National ...

    Re: Bananza Draft Blaster for air make-up
    A message posted at WOODWEB's Finishing Forum (1/25) -- Looks like the units we used to dry corn in metal grain bins. Those things were like jet engi ...

    Re: Bananza Draft Blaster for air make-up
    A message posted at WOODWEB's Finishing Forum (1/25) -- thx for the kind words, you will also need a way to diffuse the air coming out of the unit i ...

    Re: Numbers divided by a slash? 4/4, 5/4 etc...
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- Well... looks like I 'got me some learnin' to do' (that's hillbilly for 'I need to hi ...

    Re: Numbers divided by a slash? 4/4, 5/4 etc...
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- Let me just add that when you say 4/4 (1") that's in the rough. Typically at a h ...

    Re: 480v to 208 volt - efffect on amps?
    A message posted at WOODWEB's WOODnetWORK Forum (1/25) -- Bruce H, If you have 200 amps coming in at 440 and you run it through a step down transform ...

    Re: cabinet drawer lock - through gable
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/25) -- AJ We use these alot.Work great.Pretty sure they will work on double ...

    Re: White conversion varnish on Louver doors
    A message posted at WOODWEB's Finishing Forum (1/25) -- I did a whole house of louvered shutters. Worked fine. But all the sanding was crazy. ...

    Re: Chemcraft Chemlife 24 pricing
    A message posted at WOODWEB's Finishing Forum (1/25) -- where did you buy your pail? ...

    Re: Cabinet Program Needed
    A message posted at WOODWEB's CAD Forum (1/25) -- polyboard exactly option as you need its caled "catalog" you insert list of cabinet name ...

    Re: black spotting when flattening veneer
    A message posted at WOODWEB's Veneer Forum (1/25) -- That could be. Do you think a "no-grow" agent such as for a humidifier would reduce th ...

    Re: Best Bandmill for Long Timbers??
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- you can cut a 40' log on a 20' mill simply by cutting 1/2 then turn the log and cut t ...

    Better Bond Glue
    A message posted at WOODWEB's Veneer Forum (1/25) -- How does this perform versus Unibond 800? I do a fair amount of bent laminations using wiggleboa ...

    Drying Pine
    A message posted at WOODWEB's Sawing and Drying Forum (1/25) -- How do i keep the mold out of fresh cut pine being air dried? ...

    Re: Removing adhesive stain from wood door
    A message posted at WOODWEB's Adhesives Forum (1/25) -- Try alcohol first (on the wood, not in you)! The issue is going ot be adsorption of stain and ...

    Re: Hinge
    A message posted at WOODWEB's Furniture Making Forum (1/25) -- Chris: Try any of these folks, i'm certain you will find what you are looking for. If ...

    Re: spanish cedar vs sapele mahogony
    A message posted at WOODWEB's WOODnetWORK Forum (1/25) -- Sapele is a good choice. It is rot and weather resistant which is the reason why it is ofte ...

    caprone leather
    A message posted at WOODWEB's Furniture Making Forum (1/25) -- Trying to finish off a desk chair - I'm looking for a 2' square piece of Caprone black ...

    Re: High MC and Pva
    A message posted at WOODWEB's Adhesives Forum (1/25) -- Add a little heat to help the moisture move away from the joint quickly. ...

    Re: Hinge
    A message posted at WOODWEB's Furniture Making Forum (1/25) -- look like something ive seen in a lee valley hardware catalog nicko ...

    Re: Abet Laminiti
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/25) -- &#1505;&#1493;&#1489;&#1500;&#1497;&#1501; & ...

    Re: CV burnishing/shiny spots
    A message posted at WOODWEB's Finishing Forum (12/24/24) -- Which CV? Paint or Stain? Send a Picture. What are they cleaning with, other that Mind So ...

    Re: CNC ROUTER Recommendation
    A message posted at WOODWEB's CNC Forum (12/24/24) -- Just a heads up as to why you aren't getting replies to your CNC router inquiry. Woodweb is a c ...

    Re: ABCD-Mambo 500/Hicam2- Help
    A message posted at WOODWEB's CNC Forum (12/24/24) -- Thanks guys. I will look at the air cylinder sensor, but I suspect that's not the issue, it wil ...

    Marking/sawing/installing trims that are dark colors
    A message posted at WOODWEB's Cabinetmaking Forum (12/24/24) -- We prefinish and install our own cabinets. When we do black we have trouble seeing ou ...

    Re: Marking/sawing/installing trims that are dark colors
    A message posted at WOODWEB's Cabinetmaking Forum (12/24/24) -- White pencil would work well. Sharpies can be found in silver. I've never looked for ...

    Commercial Millwork Deliveries
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/24/23) -- Hello all, On a current commercial install job of over 30+ rooms ...

    Re: Shop Machine Phase Converter
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/24/23) -- I started with a 75hp rotary (actually still have it, just re ...

    Re: 3/4 overlay pocket doors
    A message posted at WOODWEB's Cabinetmaking Forum (12/24/23) -- Try these. We use them as our standard and install tons of them. They actually only d ...

    Re: Shaker doors
    A message posted at WOODWEB's Cabinetmaking Forum (12/24/23) -- Just to clear up ,the material I'm using for the shaker doors,is 2 1/2 wide popular s ...

    Re: Cherry Supplier
    A message posted at WOODWEB's Furniture Making Forum (12/24/23) -- $2.50 a board foot for 4/4 in the rough. Western PA ...

    Re: Shaker doors
    A message posted at WOODWEB's Cabinetmaking Forum (12/24/23) -- Soft maple over Poplar ...

    Cabinets Installation Estimating
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/24/22) -- My husband's uncle is a cabinet maker and he asked my husband to ...

    Re: Kremlin dealer
    A message posted at WOODWEB's Finishing Forum (12/24/22) -- Chris were do u see that deal.I have reached out to sherwins paint rep and he can’t seem ...

    Re: soft close side mount drawer guides
    A message posted at WOODWEB's Cabinetmaking Forum (12/24/22) -- Wurth side mount soft close slides are 6.50 a pair on sale and work ok. So the cost s ...

    Re: Laminating a table top
    A message posted at WOODWEB's Veneer Forum (12/24/22) -- I think using Solid wood will make your table strong and it also provides good finishing. ...

    Re: Kremlin dealer
    A message posted at WOODWEB's Finishing Forum (12/24/22) -- I got an email from SW industrial store Email me so I can forward you the email from SW ...

    Re: How would you replicate this MCM finish?
    A message posted at WOODWEB's Finishing Forum (12/24/21) -- Thanks very much, Bob. Yes, that looks like it might have been the process used. I only s ...

    Re: How Many Hinges Per Door?
    A message posted at WOODWEB's Cabinetmaking Forum (12/24/21) -- The door height and weight will make great effect on teh number of hinges. Doors less ...

    Re: Casadei K320 not heating
    A message posted at WOODWEB's Cabinetmaking Forum (12/24/21) -- UPDATE: I have tested everything and the only unusual thing I have come across is the ...

    Re: How would you replicate this MCM finish?
    A message posted at WOODWEB's Finishing Forum (12/24/21) -- I used thinned acrylic craft paint on a MCM sewing machine cabinet followed by blond shel ...

    Re: Casadei K320 not heating
    A message posted at WOODWEB's Cabinetmaking Forum (12/24/21) -- Hello, I had the same problem with an scm machine , my tech walked me through some fi ...

    Re: Looking for CNC tech support - HOLZHER with OSAI Series 10 controller
    A message posted at WOODWEB's CNC Forum (12/24/21) -- CNC machining center, mirror spark machine, slow-moving wire, drilling and tapping center, wate ...

    Re: Casadei K320 not heating
    A message posted at WOODWEB's Cabinetmaking Forum (12/24/21) -- Hi Ed, I checked all the fuses and they are A ok. Unfortunately I was praying for an ...

    Re: Casadei K320 not heating
    A message posted at WOODWEB's Cabinetmaking Forum (12/24/21) -- Hi Ed, I checked all the fuses and they are A ok. Unfortunately I was praying for an ...

    Dowel profile shaper cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (12/24/21) -- Who manufactures brazed or corrugated knife dowel shaper cutters for 9mm dowel ...

    doors
    A message posted at WOODWEB's Cabinetmaking Forum (12/24/21) -- needing to find someone to make doors like these for a job we have. ...

    Re: doors
    A message posted at WOODWEB's Cabinetmaking Forum (12/24/21) -- Check out walzcraft. They make a huge variety of doors ...

    Hafele
    A message posted at WOODWEB's Cabinetmaking Forum (12/24/21) -- Is anybody using Hafele hardware for frameless cabinets? ...

    Re: Transitioning to CNC - Cost Per Sheet?
    A message posted at WOODWEB's CNC Forum (12/24) -- No direct experience with your proposed arrangement but it would seem very complex in that you'd b ...

    Re: Sawstop Jobsite saw
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- I appreciate Derrek's feedback, on this I have to respectfully disagree. The first quest ...

    Re: Sawstop Jobsite saw
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- I need to chime in here as well. How many people or know of someone here have had injuri ...

    Re: Sawstop Jobsite saw
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- The safety feature of the saw is a very remarkable feature and a great piece of engineer ...

    Re: Where to divide work
    A message posted at WOODWEB's Business and Management Forum (12/24) -- I have different approach... Define the growth you anticipate, what is it? vol ...

    Re: Transitioning to CNC - Cost Per Sheet?
    A message posted at WOODWEB's CNC Forum (12/24) -- I started this way. I suggest you rent the space you are using and then give him a discount on you ...

    Re: Improving CV with heat??
    A message posted at WOODWEB's Finishing Forum (12/24) -- We used to sell Kraftmaid cabinet and I think I read their catalogue that says they "ba ...

    Re: Space Ball inserter
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- Get the gun it really does save valuable time, works great and you will never regret it ...

    Space Ball inserter
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- Does anyone use one of the Ez Ball guns for shooting space balls into door stiles and ra ...

    Re: Insert tooling fitment problem
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- Is this a one piece carbide insert where you can't shim between the cutters? A 6 piece s ...

    Re: Sawstop Jobsite saw
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- I sure hope they come out with the planer stop, the shaper stop, the jointer stop, the b ...

    Re: Transitioning to CNC - Cost Per Sheet?
    A message posted at WOODWEB's CNC Forum (12/24) -- Around here (So Calif) the going rate used to be $50 per sheet for cabinet type stuff OTOH shops a ...

    Re: Where to divide work
    A message posted at WOODWEB's Business and Management Forum (12/24) -- Now there's a thought, and I knew that, but I forgot. I guess at some point I ...

    Alphacam Vba for Geometry Z-level
    A message posted at WOODWEB's CAD Forum (12/24) -- Hi All, I am trying to access bottom z-level of geometry using vba in Alphacam. But I m not able t ...

    Re: Sawstop Jobsite saw
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- "The Dewalt has all the features of the Saw Stop [except the saw stop feature] at l ...

    Re: Anderson cnc
    A message posted at WOODWEB's CNC Forum (12/24) -- Point a radiant heater at the sensors in question on cold nights.... Could just be the sensors are ...

    Re: Dennis Cade Master Craftsman
    A message posted at WOODWEB's Architectural Woodworking Forum (12/24) -- God speed When you do good work the Kings find you ...

    Re: Space Ball inserter
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- We use tube it’s. They don’t roll away ...

    Re: Dennis Cade Master Craftsman
    A message posted at WOODWEB's Architectural Woodworking Forum (12/24) -- RIP GOD NEEDED NEW FURNITURE ...

    Re: Cut-Rite V9
    A message posted at WOODWEB's CAD Forum (12/24) -- Ex-Pat there is always a price to be paid when you lie to your software. Possible that my advice w ...

    Wood lathe question
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- First off I would like to wish everyone a Merry Christmas and a happy New Year. I have a ...

    Re: Wood lathe question
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- There are variable frequency drives available from China that are pretty cheap. The catc ...

    Re: Net working to older biesse XP machine
    A message posted at WOODWEB's CNC Forum (12/24) -- If you are just transfiguring files use a USB transfer cable. https://www.amazon.com/dynex-dx-c114 ...

    Microvellum Library
    A message posted at WOODWEB's CAD Forum (12/24) -- Hello, I have a problem with changing the depth of a Wall Top Hinge Cabinet. How can I update the ...

    Re: I’m looking for another supplier for liquid stripper
    A message posted at WOODWEB's Finishing Forum (12/24) -- We did the switch about a year ago. Went to Flo-strip from using B-7. I would have go look a ...

    Re: I’m looking for another supplier for liquid stripper
    A message posted at WOODWEB's Finishing Forum (12/24) -- Bob, I did hear about the short fills from another company in Wisconsin. I think I’m going t ...

    Re: I’m looking for another supplier for liquid stripper
    A message posted at WOODWEB's Finishing Forum (12/24) -- I think it is. It has less wax in it than B-7. Also they activate in a slightly different wa ...

    Re: Wood lathe question
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- Do you have 3 phase power? If you do, change the motor to 3 phase, then add a VFD. That ...

    Re: Cut-Rite V9
    A message posted at WOODWEB's CAD Forum (12/24) -- Thanks for taking the time to look into that for me, I appreciate it. You've pointed out a couple ...

    Re: Microvellum Library
    A message posted at WOODWEB's CAD Forum (12/24) -- Thank you for your support, We are using Microvellum Toolbox OEM 2019 enUS (Toolbox 7). ...

    Re: Your clients Architect is calling ...
    A message posted at WOODWEB's Architectural Woodworking Forum (12/24) -- Interesting and well articulated note. ...

    Re: Microvellum Library
    A message posted at WOODWEB's CAD Forum (12/24) -- I may be able to help, but I need to know what version you are running. ...

    Re: Furniture feet cabinet installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/24) -- Hi Derek, At the company I work for, we build and install this style ...

    Re: Project Management Software
    A message posted at WOODWEB's Business and Management Forum (12/24) -- Tyson, Some people say Smarthseet is a very flexible project management softwa ...

    Re: shop size
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- We recently moved from a 2500 SF shop to a 4500 SF. Work flow at old shop wasn't that gr ...

    Holzher Edgebander issues
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- I recently bought a Holzher 1435SE Genesis 1997 model that is giving me issues. I also b ...

    Re: shop size
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- Full disclosure here, I am from Striebig. But this is useful information for startups to ...

    Re: Drawer Question
    A message posted at WOODWEB's Furniture Making Forum (12/24) -- I think you are correct to be concerned with wood movement here. The dovetails aren't ...

    Re: Separate installation bid
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- When working with homeowners the best thing you can do is narrow everything down to one ...

    Re: Furniture feet cabinet installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/24) -- Thanks for the detailed response Ken. When installing in a remodel w ...

    Re: Holzher Edgebander issues
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- If I had two Holzher bangers with issues I would call Gordon Pettit. He is a traveling H ...

    Re: Replacement cartridge filters
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/24) -- Thanks Jon. I’ll give them a shot. Have you had much experience ...

    Replacement cartridge filters
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/24) -- Has anyone tried www.damnfilters.com for replacement air filters ...

    Re: Replacement cartridge filters
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/24) -- You might want to give Wynn Environmental a call and talk to Dic ...

    Re: Spoilboard tips
    A message posted at WOODWEB's CNC Forum (12/24) -- For filling damaged spot in a spoilboard that are not to big, use Bondo automotive body filler. 2 ...

    Re: shop size
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- My first shop was 30 x 100. I felt and still feel 30' is too narrow. I was too difficult ...

    Re: Financial Read
    A message posted at WOODWEB's Business and Management Forum (12/24) -- Even the Readers Digest version is long. I did breeze through this paper. Basi ...

    Re: CNC recommendation for school
    A message posted at WOODWEB's CNC Forum (12/24) -- It's not relevant to write code since the software can do it in seconds. I didn't write a single l ...

    Has Lee Johnson retired?
    A message posted at WOODWEB's WOODnetWORK Forum (12/24) -- There is a rumor out there that I have retired/died/am awol/disappeared. None of the above ...

    Leveling Closet Systems
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- We're a cabinet shop, but have been doing more and more closets, in which we typically d ...

    Re: Problem with Square parts from Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- I have worked on many machines with pre-milling units and have seen this problem before. ...

    Re: CNC recommendation for school
    A message posted at WOODWEB's CNC Forum (12/24) -- Rich - our area is known as the orthopedic capital of the world. The industry is starving for empl ...

    Re: Ref heights
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- With the plethora of appliances on the market today, i would never even start on drawing ...

    Re: Financial Read
    A message posted at WOODWEB's Business and Management Forum (12/24) -- Pat, I don't think a readers digest version can do it. It's too complex, with ...

    Re: Financial Read
    A message posted at WOODWEB's Business and Management Forum (12/24) -- Pat for the record it's by David Collum. He also looks at your demographics an ...

    Re: Ref heights
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- I always prefer to have the specs on the actual refrigerator being used but if I don't I ...

    Re: Financial Read
    A message posted at WOODWEB's Business and Management Forum (12/24) -- Peak Prosperity was created by Chris Martenson. He misses IMO because "pe ...

    Re: CNC recommendation for school
    A message posted at WOODWEB's CNC Forum (12/24) -- Why would you train them to program? It sure won't help them get an industry job. I can't imagine ...

    Re: Advice needed for new spray system
    A message posted at WOODWEB's Finishing Forum (12/24) -- CAT Gravity Jaguar for waterborne and small jobs; Kremlin 10-14 for Solvent materials. Can u ...

    Re: Leveling Closet Systems
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- There are typically no backs on these, so they can be 'racked' to be plumb, while not ne ...

    Help with SCM galaxy 105 Beam Saw
    A message posted at WOODWEB's CNC Forum (12/24) -- hi my dear We have a problem in the Configuration settings.(wincut software) USER PARAMETERS&1 ...

    Re: Financial Read
    A message posted at WOODWEB's Business and Management Forum (12/24) -- Chris Martensen is selling his Peak Prosperity. As we know a crash requires ov ...

    Re: Holzher edgebanding endtrim issue
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- Sir, if you are still having this issue then please call me. I need more information to ...

    Re: Financial Read
    A message posted at WOODWEB's Business and Management Forum (12/24) -- I have read plenty of Chris Martenson's stuff, I used to subscribe to what he ...

    Re: Financial Read
    A message posted at WOODWEB's Business and Management Forum (12/24) -- BTW This is the problem with listening to people who are trying to sell someth ...

    Re: looking for shops in NJ NY PA commercial work
    A message posted at WOODWEB's Business and Management Forum (12/24) -- Hi- Please email me dkotch@criterionacoustics.com. We can possible help. Dave ...

    Re: Financial Read
    A message posted at WOODWEB's Business and Management Forum (12/24) -- Pat, he is not selling a thing. You haven't read it or even attempted to and y ...

    Re: Leveling Closet Systems
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- When the cabinets don't align plumb to each other it would look off. Why not just go to ...

    Re: Financial Read
    A message posted at WOODWEB's Business and Management Forum (12/24) -- No no no, I'm not going to wade through 197 pages. Chris Martensen... Give me ...

    Re: Financial Read
    A message posted at WOODWEB's Business and Management Forum (12/24) -- If it is Peak Prosperity at this site it IS Chris Martenson or one of his asso ...

    Re: Financial Read
    A message posted at WOODWEB's Business and Management Forum (12/24) -- Merry Christmas to all. Next year will be good especially for construction. ...

    Re: Financial Read
    A message posted at WOODWEB's Business and Management Forum (12/24) -- Once again, it's not Martensen. So you are proving my point. ...

    Re: FESTOOL CONTURO KA 65 SET 574613 EDGE BANDER BANDING
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- The quality and refinement on this edgebander is 10 time better than the other ones avai ...

    Re: Biomass Furnace
    A message posted at WOODWEB's Business and Management Forum (12/24) -- I'm heating 18,000 ft with a hot air wood furnace burning our wood waste. I ge ...

    Re: Discoloration
    A message posted at WOODWEB's Finishing Forum (12/24) -- i had a Kraftmaid repair guy tell me once that they were seeing finish failure on the bottom ...

    Re: Looking for a high quality cabinet doors manufacturer
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- It's kind of funny. I think a sharp edge where the frame meets the panel looks cheap, li ...

    Re: Keeping dust/chips from getting under spoilboard
    A message posted at WOODWEB's CNC Forum (12/24) -- What, no desire to see your $500 surfacing bit hit a steel screw at 1200 IPM and 14000 RPM? ...

    Re: Keeping dust/chips from getting under spoilboard
    A message posted at WOODWEB's CNC Forum (12/24) -- I use nylon screws in my corners so if one should get hit, it won't beak anything or spark. ...

    Re: Merry Christmas
    A message posted at WOODWEB's Solid Wood Machining Forum (12/24) -- Merry Christmas to you to Russ. Happy New Year too. ...

    Spindle clamp down sensor alarm
    A message posted at WOODWEB's CNC Forum (12/24) -- I have an Omnitech Selexx Mate cnc router. During a tool change, I got a spindle tool clamp down s ...

    Re: Smaller CNC router choices, dedicated for small wood components
    A message posted at WOODWEB's CNC Forum (12/24) -- Both Shopbot and CAMaster have Forums for their end users, I own the CAMaster machines in my shop ...

    Re: Gluing Cristallo hinges to mirror
    A message posted at WOODWEB's Adhesives Forum (12/24) -- I'm not sure if you can use it for your application. We've had to use the Cristallo only onc ...

    Re: Question for the small shop guys
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- Not to hijack the thread, but can any of you answer a question for me? If you had a CNC ...

    Re: Question for the small shop guys
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- HolzHer 1243 Vertical panel saw, for limited footprint and ease of use go with a vertica ...

    alaska chainsaw mill
    A message posted at WOODWEB's Sawing and Drying Forum (12/24) -- I'm thinking about buying aMK III chainsaw mill not to get into the sawing business ...

    Re: Fast drying glue and Case Clamps
    A message posted at WOODWEB's Adhesives Forum (12/24) -- I agree 100% with Larry using any white glue and you can have the cabinet out of clamp in as ...

    Re: Diminished global demand
    A message posted at WOODWEB's Business and Management Forum (12/24) -- my sheet goods supplier added a nifty little fuel surcharge to the pricing str ...

    Re: Smaller CNC router choices, dedicated for small wood components
    A message posted at WOODWEB's CNC Forum (12/24) -- Andrew, I do hope you can make it !! CAMaster has a new x4 model called panther that is a 4 tool a ...

    Re: Question for the small shop guys
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- Mike, Is he selling them assembled or flat packed? This sounds a lot like what I'm talki ...

    Re: Question for the small shop guys
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- Gary, For large jobs or when I have multiple jobs going at the same time, I have been em ...

    Re: Question for the small shop guys
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- Striebig for most of it here. Typically rip the sheets in half on the Striebig, rip to s ...

    Re: Question for the small shop guys
    A message posted at WOODWEB's Cabinetmaking Forum (12/24) -- Gary, I've got a buddy that's local that does what you mention. He shrink wraps a pallet ...

    Re: Stain Match - 49, Me - 7 - Fourth Quarter, Help!
    A message posted at WOODWEB's Finishing Forum (12/24) -- Thanks Guys, Yeah, we sanded them off and are going at it again............ho ho ho lots of ...

    Re: Smaller CNC router choices, dedicated for small wood components
    A message posted at WOODWEB's CNC Forum (12/24) -- Do you need an ATC or is one tool enough ...

    pneumatic actuated booth fan switches?
    A message posted at WOODWEB's Finishing Forum (12/24) -- We are looking for a pneumatic switch (power on/off) for our spray booth fan (2hp). I've use ...

    Re: SLAB SAWING with BIG SAW
    A message posted at WOODWEB's Sawing and Drying Forum (12/24) -- Junkyard Wars... loved the show, even sent in a demo video to try to get on it. Nice ...

    Re: screws / staples popping up
    A message posted at WOODWEB's Veneer Forum (12/24) -- The substrate is shrinking? Is the veneer finished? Is the inside finished? What kind of adhesi ...

    Re: seen lines of hardwood edges after veneering
    A message posted at WOODWEB's Veneer Forum (12/24) -- Crossband always when veneering over hardwood. Poplar works well. ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/24) -- Rhino costs way less and in my opinion more intuitive. ...

    Re: Cracking paint/caulk where crown meets ceiling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/24) -- My experience has been this: The best is to nail crown to a ceiling ...

    Cracking paint/caulk where crown meets ceiling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/24) -- Happy Holidays all! Something that has always puzzled me about doing ...

    Re: Dining table failure
    A message posted at WOODWEB's Furniture Making Forum (12/24) -- I hope you learn from your mistake. You do realize that the customer views you as the ...

    Re: freeing a painted shut window from 1908
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/24) -- Thanks Paul. Hadnt thought of the replacement option. Duh. I appreci ...

    Re: Portable sawdust pellet production
    A message posted at WOODWEB's Value Added Wood Processing Forum (12/24) -- dear sir we can supply the sawdust pellet mill. The wood pellet mill can b ...

    Re: Doing spray touchup on cabinets large condo complex, 80+ condos,
    A message posted at WOODWEB's Finishing Forum (11/24/23) -- Jim B, Honestly blue did not work for me. I currently use red cap and works great.411 tip ...

    Re: In house door makers: What 1 piece of equipment increased your efficien
    A message posted at WOODWEB's Cabinetmaking Forum (11/24/23) -- JLT door clamp & panel clamp system has cleared my biggest bottleneck. Paid for i ...

    Re: Doing spray touchup on cabinets large condo complex, 80+ condos,
    A message posted at WOODWEB's Finishing Forum (11/24/23) -- blue aircap 1140 tip is a good start ...

    Re: Holzma Optimat saw question
    A message posted at WOODWEB's CNC Forum (11/24/23) -- Thanks Dropout, I'll check to see if that has been done yet. ...

    Re: Homag/Brandt edgebander parts
    A message posted at WOODWEB's Cabinetmaking Forum (11/24/23) -- NLA or bonkers expensive new? ...

    Re: Switching from Cabinet Vision
    A message posted at WOODWEB's CAD Forum (11/24/22) -- We run CV. We have 5 seats of Ultimate and 2 seats S2M. We are deeply imbedded now and I can’t ...

    Re: Custom Cabinetry and remodeling
    A message posted at WOODWEB's Business and Management Forum (11/24/22) -- Yea I doubt I could get the $28/hour I been asking at a cabinet shop. I can ...

    Re: AAA system to solve problems?
    A message posted at WOODWEB's Finishing Forum (11/24/22) -- You can't go wrong with a AAA I have the CAT 14:1 peak pump and really like it CA Technol ...

    Re: Dark paint dry times
    A message posted at WOODWEB's Finishing Forum (11/24/22) -- I’ve never used Turino but all the other MLC products I’ve used and a few other manufactu ...

    Re: Dark paint dry times
    A message posted at WOODWEB's Finishing Forum (11/24/22) -- I concur that deeper based colors definitely are softer and take more time to cure. I wou ...

    Re: Dark paint dry times
    A message posted at WOODWEB's Finishing Forum (11/24/22) -- I’ve never used Turino but all the other MLC products I’ve used and a few other manufactu ...

    Re: Timesaver Speedsander gouging wood when tracking
    A message posted at WOODWEB's Solid Wood Machining Forum (11/24/22) -- Hi Dustin, I have owned this machine for fourteen years. It isn't the belts or ...

    Re: Dark paint dry times
    A message posted at WOODWEB's Finishing Forum (11/24/22) -- Thanks for the responses. Looks like I just need to let it sit. I had let it sit overnigh ...

    Re: AAA system to solve problems?
    A message posted at WOODWEB's Finishing Forum (11/24/22) -- Thanks everyone for the advice, no surprise that you all recommend getting a aaa. I have ...

    Re: Aftermarket digital readout
    A message posted at WOODWEB's Architectural Woodworking Forum (11/24/22) -- Pro scale is the way to go. I did a modification on mine so that I don't ...

    Re: Timesaver Speedsander gouging wood when tracking
    A message posted at WOODWEB's Solid Wood Machining Forum (11/24/22) -- Do you get the same results with different sanding belts? Flipping the belts, ...

    Re: When will it end....
    A message posted at WOODWEB's Architectural Woodworking Forum (11/24/22) -- Mark. Your confused. That dude isn't a woodworker, he is a entertainer. J ...

    Re: dovetails on prefinished stock
    A message posted at WOODWEB's Cabinetmaking Forum (11/24/22) -- I bought prefinished drawer stock once many years ago. It was cupped and bowed so it ...

    Re: Timesaver Speedsander gouging wood when tracking
    A message posted at WOODWEB's Solid Wood Machining Forum (11/24/22) -- Timesaver machined that part when new and it's just now causing you problems 1 ...

    Re: Dark paint dry times
    A message posted at WOODWEB's Finishing Forum (11/24/22) -- Blue painters tape works 100% better than cardboard but it’s a pain to clean off racks. ...

    Re: AAA system to solve problems?
    A message posted at WOODWEB's Finishing Forum (11/24/22) -- do you mind me asking what the sale price was? ...

    Re: Wavy / Rippled Lumber
    A message posted at WOODWEB's Architectural Woodworking Forum (11/24/21) -- Yes, I would return it. Over the years I have had many "bad" sh ...

    Re: Is this "spray booth setup" dangerous?
    A message posted at WOODWEB's Finishing Forum (11/24/21) -- Yeah, it's a sticky situation. I'm keeping this super anonymous because I care about the ...

    Re: Is this "spray booth setup" dangerous?
    A message posted at WOODWEB's Finishing Forum (11/24/21) -- Thanks, Hen Bob. I am preparing for a conversation with him. If anything ever happened to ...

    Re: cherry sap stain
    A message posted at WOODWEB's Finishing Forum (11/24/21) -- I have tried ngr stain in cherry, but it did not work nearly as well. This stuff was amaz ...

    Re: SCM Pratix S15 issues
    A message posted at WOODWEB's CNC Forum (11/24/21) -- Thanks for the advice. I did call into SCM yesterday and they were very quick and helpful. The ...

    Re: Is this "spray booth setup" dangerous?
    A message posted at WOODWEB's Finishing Forum (11/24/21) -- Be aware that by contacting authorities, the owner will likely face multiple violations a ...

    Re: Pro Scale deal
    A message posted at WOODWEB's Cabinetmaking Forum (11/24/21) -- We have one on a SCMI shaper. Very useful for quicker set-ups, better set-ups. Howeve ...

    Re: EMA/Casadei shaper spindle bearing replacement
    A message posted at WOODWEB's Solid Wood Machining Forum (11/24/21) -- BTW, that nobbly piece on top of the upper bearing (marked 1), is a "fan& ...

    EMA/Casadei shaper spindle bearing replacement
    A message posted at WOODWEB's Solid Wood Machining Forum (11/24/21) -- We just got an older EMA/casadei F115 shaper, the bearings could use replacing ...

    Is this "spray booth setup" dangerous?
    A message posted at WOODWEB's Finishing Forum (11/24/21) -- This is a business use in a residential garage. I feel like it's a death trap and want to ...

    Re: Is this "spray booth setup" dangerous?
    A message posted at WOODWEB's Finishing Forum (11/24/21) -- The 55gal Drums of solvent are especially dangerous. I had a fire inspector explain to me ...

    Re: Red Elm Cabinet Question
    A message posted at WOODWEB's Cabinetmaking Forum (11/24/21) -- Gary - Others have used "wordsmith" to describe some of what I do. In order ...

    Re: Is this "spray booth setup" dangerous?
    A message posted at WOODWEB's Finishing Forum (11/24/21) -- I don't think he's a good guy. He's got his own ass covered through LLCs but he provides ...

    Re: EMA/Casadei shaper spindle bearing replacement
    A message posted at WOODWEB's Solid Wood Machining Forum (11/24/21) -- What I see is a bolt and washer below the stepped pulley that mates with a tap ...

    Re: SCM Pratix S15 issues
    A message posted at WOODWEB's CNC Forum (11/24/21) -- I would try what Pdub said and see if the old owner could get support. I think SCM wants about ...

    Construction boring machine vs lineboring machine
    A message posted at WOODWEB's Cabinetmaking Forum (11/24/21) -- looking at a construction boring machine for sale anyone know if you can do unlimited ...

    Re: EMA/Casadei shaper spindle bearing replacement
    A message posted at WOODWEB's Solid Wood Machining Forum (11/24/21) -- Tom, I think you have shown me the light... I was looking at this wrong. The t ...

    Re: Is this "spray booth setup" dangerous?
    A message posted at WOODWEB's Finishing Forum (11/24/21) -- Stupid is as stupid does. Reminds me of a time I was on a job site and an installer was u ...

    Re: Pro Scale deal
    A message posted at WOODWEB's Cabinetmaking Forum (11/24/21) -- David, I appreciate the info that they improve setup in both time and quality. As for ...

    Re: cherry sap stain
    A message posted at WOODWEB's Finishing Forum (11/24/21) -- Try Charles Neil blotch control. Charles passed away a few years ago but you can still bu ...

    Re: Pro Scale deal
    A message posted at WOODWEB's Cabinetmaking Forum (11/24/21) -- I was looking at these for a shaper, does anyone have one installed on your shaper an ...

    Re: Construction boring machine vs lineboring machine
    A message posted at WOODWEB's Cabinetmaking Forum (11/24/21) -- most machines of these machines can do any length and just by looking at it this one ...

    Book
    A message posted at WOODWEB's Cabinetmaking Forum (11/24/21) -- Dave Sochar Awhile back you talked about publishing a book. Did that ever happen? Do ...

    Re: Is this "spray booth setup" dangerous?
    A message posted at WOODWEB's Finishing Forum (11/24/21) -- Wow! Residential area? Is there a filters box/wall? Fire extinguishers? Is this a real bu ...

    Re: Construction boring machine vs lineboring machine
    A message posted at WOODWEB's Cabinetmaking Forum (11/24/21) -- Is there any provision for a line boring fence? Perhaps contact SCMI? ...

    Re: Is this "spray booth setup" dangerous?
    A message posted at WOODWEB's Finishing Forum (11/24/21) -- Ha! It's ok now! I do see a fire extinguisher! ALL GOOD!&#128077; ...

    Re: Specks in black paint
    A message posted at WOODWEB's Finishing Forum (11/24/21) -- Karla, They were not white specks, they were the color of the black paint. Mark ...

    Re: Specks in black paint
    A message posted at WOODWEB's Finishing Forum (11/24/21) -- Why does too small of a tip create any specks at all compared to a bigger tip? ...

    Re: Construction Details for Vent Hood with Duct Access for Hookup
    A message posted at WOODWEB's Cabinetmaking Forum (11/24/21) -- Check this out. ...

    Re: Specks in black paint
    A message posted at WOODWEB's Finishing Forum (11/24/21) -- Why does a small tip create white specks? ...

    Re: Advice, What's my Worth
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Thanks guys. To clarify, I'm extremely happy where I work at. I pretty much ta ...

    Re: Crown to ceiling...Reveal or not?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/24) -- If your dealing with truss uplift it would seem no solution other th ...

    Re: Advice, What's my Worth
    A message posted at WOODWEB's Business and Management Forum (11/24) -- You don't say what area you are in. I'm thinking at the low 55k at the high 10 ...

    Trouble Importing DXF's to Mozaik
    A message posted at WOODWEB's CAD Forum (11/24) -- I'm working with a friend to make a christmas gift for her Neice, (URL below) and having some trou ...

    mdf interior door
    A message posted at WOODWEB's Architectural Woodworking Forum (11/24) -- A contractor would like us to build a 32"x80" mdf interior door th ...

    Re: Sauna wall panels
    A message posted at WOODWEB's Architectural Woodworking Forum (11/24) -- The product you cited is not recommended for high humidity. Therefore, use i ...

    Re: dust collector fills one bag much faster than the other
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/24) -- Here's my set up for the cnc. Wall mounted 3 hp blower above an ...

    Re: Advice, What's my Worth
    A message posted at WOODWEB's Business and Management Forum (11/24) -- As was stated by "Owner" previously, the revenue for which you're re ...

    Re: mdf interior door
    A message posted at WOODWEB's Architectural Woodworking Forum (11/24) -- Never done it but any balanced option, and machined both sides, should be fi ...

    Re: Crown to ceiling...Reveal or not?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/24) -- All Vaulted Ceilings...sounds good. Mark- A 2 pc crown system would ...

    Re: mdf interior door
    A message posted at WOODWEB's Architectural Woodworking Forum (11/24) -- P.S. if its a rolling door I'd talk him into just leaving it 1 1/2". No ...

    Re: mdf interior door
    A message posted at WOODWEB's Architectural Woodworking Forum (11/24) -- Any time you remove material from a face of MDF, you have a mess. The materi ...

    Re: Columbia Forrest vs Packard Forrest Products
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- I have only had Packard in the shop a handful of times and no complaints but have always ...

    Re: Omnitech-Selexx Pal- Locating Pins not coming up
    A message posted at WOODWEB's CNC Forum (11/24) -- The Locating pins will only come up when the Z axis is set to zero. From what I can figure its a m ...

    Re: Sauna wall panels
    A message posted at WOODWEB's Architectural Woodworking Forum (11/24) -- I found some options for walls and ceiling panels. It is available in a vari ...

    Re: Advice, What's my Worth
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Sounds like you're happy--why do you care what someone else makes?? If you wan ...

    Re: Thermoform plastic laminate
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- I think it can be done. I don't remember the diameter of these but I think it was in the ...

    Re: dust collector fills one bag much faster than the other
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/24) -- Here's the photo of my set up for the cnc. ...

    Re: Crown to ceiling...Reveal or not?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/24) -- Vault all the ceilings--then you don't have to worry about it! ...

    Re: Outdoor laminate top substrate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/24) -- Three come to mind- Extiera MDF, Medex MDF, and MDO plywood. ...

    Re: Advice, What's my Worth
    A message posted at WOODWEB's Business and Management Forum (11/24) -- This is relevant regardless of the usual attempts at gaslighting. ...

    Re: Advice, What's my Worth
    A message posted at WOODWEB's Business and Management Forum (11/24) -- mauricio. The key to happiness is low expectations. ...

    Re: Advice, What's my Worth
    A message posted at WOODWEB's Business and Management Forum (11/24) -- You never said where you are located. ...

    Re: Router specs for miter folding solid surface
    A message posted at WOODWEB's CNC Forum (11/24) -- How about this ? Set up two 91 degree cutters in the router. Use one to make the first couple pass ...

    Re: router dust collection
    A message posted at WOODWEB's Solid Wood Machining Forum (11/24) -- I think your only option with a jig is going to be to custom fab a boot for your ...

    Resin resources
    A message posted at WOODWEB's Furniture Making Forum (11/24) -- I'm jumping back into woodworking specifically to learn more about resin tables and s ...

    Re: Shaper fence setup
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- All you are doing is getting the outfeed fence in-line with the cutter head. That can al ...

    Re: RE: Lacquer Finishes & Alternatives
    A message posted at WOODWEB's Finishing Forum (11/24) -- We do lots of touch up on many hi end brands of furniture and yes we see lots of NC. Yes som ...

    Re: How hard/resistant should precat be?
    A message posted at WOODWEB's Finishing Forum (11/24) -- Typical sanding: 150 bare wood 240 primer/sealer 320 between topcoats You can see 240 scratc ...

    Re: Shaper fence setup
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- Typically you take a ruler and set the infeed table so it makes your 1/16 cut. Take a sa ...

    Re: RE: Lacquer Finishes & Alternatives
    A message posted at WOODWEB's Finishing Forum (11/24) -- FWIW: Most musical instrument manufacturers have moved on to 2k urethane (for non-vintage in ...

    Re: Resin resources
    A message posted at WOODWEB's Furniture Making Forum (11/24) -- The bit in question is known as a spoilboard surfacing bit. All the major industrial ...

    Re: Shaper fence setup
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- I second Adam, much better way for both setup and straightening and sizing. Sizing anyth ...

    Re: Trends with Dark Stain
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/24) -- Only trend I see is white or off white cabinets. It'd be nice to get ...

    Re: Building custom cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- Max, Is is laminate or Acyllic? If its arcyllic ask Richlieu or Premier Eurocase if the ...

    Re: router dust collection
    A message posted at WOODWEB's Solid Wood Machining Forum (11/24) -- Leigh makes a wonderful looking system, I don't own one. Maybe you could build so ...

    Re: Laser Wood Business Cards
    A message posted at WOODWEB's Business and Management Forum (11/24) -- MarkB, Back in the Rolodex days, right? ...

    Re: cutting formica sheets
    A message posted at WOODWEB's CNC Forum (11/24) -- I have cut Formica on the cnc for a few jobs. If you are cutting rectangles it is faster to work o ...

    Re: tramming a vise with an enclosure/ safety mat machine
    A message posted at WOODWEB's CNC Forum (11/24) -- Place the vise as close to desired position. Clamp down and fix stock in the jaws above the height ...

    Re: Mini Max jointer/planer motor problem
    A message posted at WOODWEB's Solid Wood Machining Forum (11/24) -- Yea just try replacing the capacitor with a like one. Check to see if the centrif ...

    Re: cutting formica sheets
    A message posted at WOODWEB's CNC Forum (11/24) -- I have done some inlays requiring tight fits, i will adhere the plam to a sheet of melamine with l ...

    tramming a vise with an enclosure/ safety mat machine
    A message posted at WOODWEB's CNC Forum (11/24) -- Anybody have any ideas on how to get this done without riding around in the enclosure? OSHA kind o ...

    Re: cutting formica sheets
    A message posted at WOODWEB's CNC Forum (11/24) -- Thank you all for your great help I am doing sonthing like that Its my first job like that any rec ...

    Re: cutting formica sheets
    A message posted at WOODWEB's CNC Forum (11/24) -- By like that i mean working with 2 colors toghether ...

    Shop drawings being used as design documents
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Lets start with the basic question... When an architect or designer uses shop ...

    Re: Mechanical Aptitude test for hiring?
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Heh. LBJ. Yup. Something about influencing voting preferences for 200 years. C ...

    Re: Shop drawings being used as design documents
    A message posted at WOODWEB's Business and Management Forum (11/24) -- From our small shop perspective, we only do detailed and drastic revisions aft ...

    Re: Something to be thankful for
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Pat, you are usually excellent about providing a reputable source for your sta ...

    Re: Shop drawings being used as design documents
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Very easy. Write the change order/estimate line by line showing revisions from ...

    Re: Does Lean work on a construction site?
    A message posted at WOODWEB's Business and Management Forum (11/24) -- A construction site can be lean Like everyone else, it starts at the top I thi ...

    Re: Something to be thankful for
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Family Man I get it, we went through something similiar with Japan. You're rig ...

    Re: Something to be thankful for
    A message posted at WOODWEB's Business and Management Forum (11/24) -- You have to consider that the housing market in Canada and Australia are a fra ...

    Re: Something to be thankful for
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Pat, I thought people would find the au/nz info(not stories) interesting. Do I ...

    Re: Something to be thankful for
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Pat, You are not considering how concentration matters. Dropping 300k pebbles ...

    Re: CABINET INSTALLER PRICING
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/24) -- There you go... for what it's worth, the "going rate" is a ...

    Re: Machine won't reference Need Help!!!!
    A message posted at WOODWEB's CNC Forum (11/24) -- This looks like the HolzHer control screen. But I believe the error is related to you are missing ...

    Re: Something to be thankful for
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Australia & New Zealand have had a huge problem with foreign investors buy ...

    Re: Shop drawings being used as design documents
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Following, just went through the very same thing. Large commercial job that en ...

    Re: Mechanical Aptitude test for hiring?
    A message posted at WOODWEB's Business and Management Forum (11/24) -- I have had better luck than you on the references. If nothing else you can go ...

    Re: Shop drawings being used as design documents
    A message posted at WOODWEB's Business and Management Forum (11/24) -- If it's not already in your contract, the charges for the revisions should acc ...

    Re: Something to be thankful for
    A message posted at WOODWEB's Business and Management Forum (11/24) -- If yous want more statistics go get them i'm not the libarian. ...

    Re: Machine won't reference Need Help!!!!
    A message posted at WOODWEB's CNC Forum (11/24) -- Machine and control make and model? ...

    Re: Crazing of polycrylic over shellac primer
    A message posted at WOODWEB's Finishing Forum (11/24) -- Thanks all for the additional responses. The reason I'm using a sealer over the stain, befor ...

    Re: Updated information on moulding/trim business needed
    A message posted at WOODWEB's Business and Management Forum (11/24) -- While a woodmaster might not be a truly industrial machine i can speak from ex ...

    Appliance installation callbacks policy
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Hi I am constantly getting called back to jobs at the URGENT stage wen the bui ...

    If..else.. inside IMOS12.0
    A message posted at WOODWEB's CAD Forum (11/24) -- Good Day. I am Lian and using IMOS 12.0 for months now. i was wondering if is it possible to have ...

    Re: Clearcoating maple that has been previously oiled
    A message posted at WOODWEB's Finishing Forum (11/24) -- My goodness Rich C is a man of few words, but no explanation. The oil is very hard to remove ...

    Re: Crazing of polycrylic over shellac primer
    A message posted at WOODWEB's Finishing Forum (11/24) -- Steven, Sorry you had problems and some rude replies. The Shellac tinted primer was not full ...

    Re: Glass in melamine
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- Hello, I am getting ready to do something similar, planning to rip strips of platforms ( ...

    Re: best adhesive
    A message posted at WOODWEB's Adhesives Forum (11/24) -- If its not wood then why use a pva wood glue? Beyond wood its only good for paper and no loa ...

    Re: Proposals in cabinetware
    A message posted at WOODWEB's CAD Forum (11/24) -- Do you use your Microsoft Word program or the default Write.exe that it is set to in the .ini file ...

    Re: Does Fastenlink work?
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- Thanks for mentioning that Steve. If Fastenlink tolerates that they are complicit by com ...

    Proposals in cabinetware
    A message posted at WOODWEB's CAD Forum (11/24) -- I am asking for any tips and ideas for using cabinet ware 14 to make proposal submissions for jobs ...

    Re: Crazing of polycrylic over shellac primer
    A message posted at WOODWEB's Finishing Forum (11/24) -- Why use sanding sealer if you are going over it with primer? If you are hell bent on sanding ...

    Re: Prefinish Or Not To Prefinish
    A message posted at WOODWEB's Furniture Making Forum (11/24) -- We finish most everything before assembly Just be sure to mask off mortises and tenon ...

    Re: Crazing of polycrylic over shellac primer
    A message posted at WOODWEB's Finishing Forum (11/24) -- I cannot add anything to the process, but I do like the finished look even thought it may no ...

    Tineo veneer match
    A message posted at WOODWEB's Veneer Forum (11/24) -- I'm looking for a less expensive veneer that will mach or a close match to Tineo veneer... Does ...

    Re: Are you a licensed shop
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- Calif requires a license and workers comp. Have to have this to hold the customer accoun ...

    Re: Please help us figure out what this is and where we can purchase
    A message posted at WOODWEB's WOODnetWORK Forum (11/24) -- It's a small screw jack, also called an adjustable jack. ...

    Re: cnc training
    A message posted at WOODWEB's CNC Forum (11/24) -- i have some training manual for the cnc router message me Johncadcamcnc@gmail.com ...

    Re: The Death Of CabnetWare
    A message posted at WOODWEB's CAD Forum (11/24) -- I am sticking with it. keep us informed ...

    Re: sharpening a card scraper
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- Cabinet scrapers are great tools, too bad people seem to struggle with sharpening. First ...

    Re: Need help matching a finish
    A message posted at WOODWEB's Finishing Forum (11/24) -- Nate - your description of the existing finish provides the best clue on ways to match it - ...

    Re: Need help matching a finish
    A message posted at WOODWEB's Finishing Forum (11/24) -- It looks like the Chestnut is a good choice Tate. It’s light enough for the color you’re mat ...

    Re: Any of you guys do solid surface?
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- Depending on how much labor you want to spend: Saw blade designed for SS, 3.25 hp router ...

    Re: Need help matching a finish
    A message posted at WOODWEB's Finishing Forum (11/24) -- Paul - Very cool! Thanks for your advice. It's aligning with what I'm thinking. Mudding up s ...

    Chain routing on SCMI K208 ERT-L Edgebander
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/24) -- Hello - Recently acquired a 2001 SCMI K208 ERT-L edgebander that needs ...

    Re: ADA guideline standards
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Thx so far everyone. Pat or anyone...imagine this...the gal checking someone o ...

    Re: Need help matching a finish
    A message posted at WOODWEB's Finishing Forum (11/24) -- Thanks everyone for replying and the advice. Bill - I think I am leaning toward a method tha ...

    Re: Waste Management
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Thanks everyone for sharing various woodworking waste removal ideas. It is imp ...

    Re: ADA guideline standards
    A message posted at WOODWEB's Business and Management Forum (11/24) -- The clip board trick will not work in most jurisdictions! Yes the space requir ...

    Re: Sanding MDF for paint
    A message posted at WOODWEB's Finishing Forum (11/24) -- Claw lock would certainly require less prep sanding than Aqualente. Personally I have shot t ...

    Re: Determining Vacuum Holddown
    A message posted at WOODWEB's CNC Forum (11/24) -- Thank you for all the input. Right now I am leaning towards a 25hp 455 CFM Busch pump. I think thi ...

    Re: Cabinet design software
    A message posted at WOODWEB's CAD Forum (11/24) -- I think this online app may be something that you are looking for http://prodboard.eu/kitchen/ The ...

    Stainless steel concealed hinge
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- Can anyone please tell me of a concealed cabinet hinge that meets the following: Face fr ...

    Re: ADA guideline standards
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Start with Illinois, I imagine the City of Chicago has its own rules. Also fin ...

    Re: Rockler's Speed Cope coping jig
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/24) -- You asked about plastic so I answered about plastic, thinking too ha ...

    Re: Need help matching a finish
    A message posted at WOODWEB's Finishing Forum (11/24) -- We match colors like that frequently. For us we would start with 1/2 Dark Walnut and 1/2 Gol ...

    Re: ADA guideline standards
    A message posted at WOODWEB's Business and Management Forum (11/24) -- Thx larry. So my next question to solve all of these mysteries in my Chicagola ...

    Re: finishes on mdf veneered and banded mdf kitchen doors.
    A message posted at WOODWEB's Finishing Forum (11/24) -- If he doesn't want the edges eased have him sign off that he accepts all liability for finis ...

    Re: Need help matching a finish
    A message posted at WOODWEB's Finishing Forum (11/24) -- I'm seeing it in person and I have a hard telling if the pigment is on the wood or in the fi ...

    Re: finishes on mdf veneered and banded mdf kitchen doors.
    A message posted at WOODWEB's Finishing Forum (11/24) -- You need to break the edges. A sharp corner won't hold finish. ...

    Re: Need help matching a finish
    A message posted at WOODWEB's Finishing Forum (11/24) -- You need a stain that has gilsonite in it. That will give you the dark graining. ...

    Re: Any of you guys do solid surface?
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- we slam the stuff out daily. What is it that you want to know ? ...

    Re: Need help matching a finish
    A message posted at WOODWEB's Finishing Forum (11/24) -- Here's an unfinished piece to see the bare wood closer. ...

    Re: finishes on mdf veneered and banded mdf kitchen doors.
    A message posted at WOODWEB's Finishing Forum (11/24) -- This works well on the edges ...

    Re: Cabinet Vision Graphics Problem
    A message posted at WOODWEB's CAD Forum (11/24) -- I know this sounds strange, but check the materials schedule ...

    Re: Rockler's Speed Cope coping jig
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/24) -- Point taken. Thx guys ...

    Re: Molding on KCD
    A message posted at WOODWEB's CAD Forum (11/24) -- Hi Kevin, There is a way you can create multiple moldings in KCD, you would use a Filler Top under ...

    Re: Cutting aluminum
    A message posted at WOODWEB's CNC Forum (11/24) -- "Did a texture in aluminum a while back for the same client as this job. I attached the photo ...

    Re: Entry Level CNC machines
    A message posted at WOODWEB's CNC Forum (11/24) -- My original Camaster 408 was built in 1998 I purchased it in 07 and upgrade the controller, it is ...

    Re: cnc camparison
    A message posted at WOODWEB's CNC Forum (11/24) -- Bill, My information is all second hand and comes from a tech who works on these machines. It is m ...

    Re: LSL Lamination Failure
    A message posted at WOODWEB's Architectural Woodworking Forum (11/24) -- Those types of products are manufactured by compressing the would fibers und ...

    Re: Stone CNC
    A message posted at WOODWEB's CNC Forum (11/24) -- StoneAdvice is actually not frequented very much anymore. Most of the users from there now frequen ...

    Re: Cell Phone Drawer
    A message posted at WOODWEB's Furniture Making Forum (11/24) -- Whatever you do, just remember that it will be undone and redone multiple times, unle ...

    Re: counter top divider
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/24) -- I have also gone to the basement and ran a screw up through the floo ...

    Re: LSL Lamination Failure
    A message posted at WOODWEB's Architectural Woodworking Forum (11/24) -- I just received some actual photos showing what is really happening. Also th ...

    Re: Entry Level CNC machines
    A message posted at WOODWEB's CNC Forum (11/24) -- The Stingers haven't been out that long to give a good answer. I have seen where they said to get ...

    Re: Software for Corbels & Legs
    A message posted at WOODWEB's CNC Forum (11/24) -- Adam, There are limitations with any software..Here is a custom leg we recently did. I'll be glad ...

    Re: Cell Phone Drawer
    A message posted at WOODWEB's Furniture Making Forum (11/24) -- Gary, could you use the docking drawer mechanism and mount it vertically instead of h ...

    Re: Shop Size
    A message posted at WOODWEB's CAD Forum (11/24) -- 8000 sf and tight bander, cnc and a vertical panel saw. 7 guys all laminate and solid surface. So ...

    Re: What software to use?
    A message posted at WOODWEB's CAD Forum (11/24) -- Jack You can call Dave Wishengrad about particulars, After 2 PM PST. 805-404-2142 ...

    Re: Molding on KCD
    A message posted at WOODWEB's CAD Forum (11/24) -- You can use the upper filler on top of your upper cabinet and add molding to that. ...

    Re: counter top divider
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/24) -- Thank you, I'll have to try that. ...

    Re: LSL Lamination Failure
    A message posted at WOODWEB's Architectural Woodworking Forum (11/24) -- An additional picture... ...

    Re: Stone CNC
    A message posted at WOODWEB's CNC Forum (11/24) -- Try this one. http://stoneadvice.com/ ...

    MDF edge showing up through finished veneer
    A message posted at WOODWEB's Veneer Forum (11/24) -- Hello, I finished a project about 2 months ago and i just started noticing the edge grain of th ...

    Re: Tightest radius for paper back veneer bending?
    A message posted at WOODWEB's Veneer Forum (11/24) -- Not a direct answer, but have you considered using heat to preshape the veneer? Oaks are among ...

    Re: Tightest radius for paper back veneer bending?
    A message posted at WOODWEB's Veneer Forum (11/24) -- Jon, Clever idea.......thanks. I've done a little testing and it appears it should be no proble ...

    Re: Wax finish not drying
    A message posted at WOODWEB's Finishing Forum (10/24/24) -- Welcome! Don't worry; we're all here to help each other out. It sounds like you’re dealin ...

    Re: Best Nested CNC for Routered Doors
    A message posted at WOODWEB's CNC Forum (10/24/24) -- The choice of the best CNC machine for milling doors depends on the door material and design, w ...

    Re: New direction in finishing my work
    A message posted at WOODWEB's Finishing Forum (10/24/24) -- Well said. I guess you're never too old to learn new tricks. I am familiar with Ilva prod ...

    Re: Balancing Craftsmanship and Profit in a Competitive Market
    A message posted at WOODWEB's Business and Management Forum (10/24/24) -- It really helped me to switch to frameless. Most clients don't care about t ...

    Re: New direction in finishing my work
    A message posted at WOODWEB's Finishing Forum (10/24/24) -- The main reason which I noted earlier is I have zero experience with finishing and at thi ...

    Re: New direction in finishing my work
    A message posted at WOODWEB's Finishing Forum (10/24/24) -- Sir , learning how to brush cabinetry is far more harder than getting a simple portable b ...

    Re: Sliding table saw
    A message posted at WOODWEB's Cabinetmaking Forum (10/24/24) -- I have had a Martin t72 for about 5 years now . Love it. However I am closing the sho ...

    Re: Labels for automatic labelet
    A message posted at WOODWEB's CNC Forum (10/24/24) -- RiseUp Label has the Residue Free RiseClean Label that will remove easily with no residue left ...

    Re: Sliding table saw
    A message posted at WOODWEB's Cabinetmaking Forum (10/24/24) -- I wish californistan wasn't so far away Quicktrim. ...

    Re: 3-Phase converter lesson
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24/23) -- You can make a rotary converter out of any three phase motor. Run your tw ...

    Re: lamello zeta
    A message posted at WOODWEB's Cabinetmaking Forum (10/24/23) -- The tool is a huge help where needed. Speeds up panel installation for us immensly. W ...

    Re: Help! Keep getting dark grain when staining white oak
    A message posted at WOODWEB's Finishing Forum (10/24/23) -- Per line one of the forum guidelines; WOODWEB is a professional industrial woodworking si ...

    Re: Biesse Rover -TP Suction Box Error
    A message posted at WOODWEB's CNC Forum (10/24/23) -- The sensor will have a light on it. If the light is off either the sensor is bad, a wire is bro ...

    Help! Keep getting dark grain when staining white oak
    A message posted at WOODWEB's Finishing Forum (10/24/23) -- Hi all. I’m a finishing noobie as it pertains to staining white oak. I’ve got some railin ...

    Re: Biesse Rover -TP Suction Box Error
    A message posted at WOODWEB's CNC Forum (10/24/23) -- Ok. This is about what I figured. The only trouble is that I can't find any sensors with LEDs t ...

    Re: Exterior Wood Cladding - "Panels"
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24/23) -- Appreciate the advice - I am by no means a wood expert. Just asking the q ...

    Re: Good used lathes
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24/23) -- Modern lathes are light years ahead of old iron when it comes to wood lat ...

    Re: 3/4 overlay pocket doors
    A message posted at WOODWEB's Cabinetmaking Forum (10/24/23) -- Actually you just overhang the doors above and below if possible to create the overla ...

    Re: Exterior Wood Cladding - "Panels"
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24/23) -- The overhang in the photo is massive and far from "normal" at t ...

    Re: Lacquer doors peeling
    A message posted at WOODWEB's Cabinetmaking Forum (10/24/23) -- I'd guess your issue is water. Sand the door finish without changing the patina. If i ...

    Moulding Red Gum
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24/23) -- Does anyone have experience machining red gum? running a weinig moulder at 800 ...

    Re: Exterior Wood Cladding - "Panels"
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24/23) -- Bamboo is grass, Cedar is wood. The cellular characteristics are much dif ...

    Re: Exterior Wood Cladding - "Panels"
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24/23) -- If you don't like my advice, go ahead and do it. If money is no object, j ...

    Re: Good used lathes
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24/23) -- Actually bowls are exactly what he mentioned to me. I'll pass on your adv ...

    Re: Gluing VS Floating Panels
    A message posted at WOODWEB's Cabinetmaking Forum (10/24/23) -- I glue MDF panels into Maple frames for painted doors without issue. ...

    Re: Holz her 1245 manual
    A message posted at WOODWEB's Cabinetmaking Forum (10/24/23) -- I'm also curious I'm looking for a copy of manual also ...

    Re: Laminating a table top
    A message posted at WOODWEB's Veneer Forum (10/24/22) -- Apples and Oranges go together in the nice turned bowl in the center of the table. But serio ...

    Re: Hot air edgebanding - can you get edgeband
    A message posted at WOODWEB's Cabinetmaking Forum (10/24/22) -- Sorry for not being clear. I am looking at a commercial automatic edgebander with pre ...

    is hot air edgebanding for production edgebanders available
    A message posted at WOODWEB's Business and Management Forum (10/24/22) -- I am looking to get a new commercial automatic edgebander with premill, cor ...

    Re: Brandt Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (10/24/22) -- Jim, You figure out the edgebander? Do you have the manual and wiring diagram for the ...

    Re: Hot air edgebanding - can you get edgeband
    A message posted at WOODWEB's Cabinetmaking Forum (10/24/22) -- Long story short...It depends. Locally ,next to impossible unless it a large order. T ...

    Re: 5 piece cabinet door screw up
    A message posted at WOODWEB's Cabinetmaking Forum (10/24/22) -- Thanks for all the help, I have a couple shapers, a shape and sand and a double end c ...

    Re: 5 piece cabinet door screw up
    A message posted at WOODWEB's Cabinetmaking Forum (10/24/22) -- I screwed up the height of some doors that wouldn't allow the pullouts to function wi ...

    Re: 5 piece cabinet door screw up
    A message posted at WOODWEB's Cabinetmaking Forum (10/24/22) -- I had new guy, and a good sized job. About 200 paneled doors and drawer fronts. They ...

    Re: Brandt Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (10/24/22) -- Hey Scott, Thanks for reaching out! I will try switching the end trimmers and check g ...

    Re: 2 quart pressure pot
    A message posted at WOODWEB's Finishing Forum (10/24/22) -- you can get the PPS with a pressurized cup. i use it to spray small amounts of polyester. ...

    Re: Laminating a table top
    A message posted at WOODWEB's Veneer Forum (10/24/22) -- Aren't you comparing apples to oranges David? I agree that 7 ply will react much differently ...

    Re: Laminating a table top
    A message posted at WOODWEB's Veneer Forum (10/24/22) -- Bad idea. That table will expolode or warp to heck. Use solid wood. Sounds like a make work ...

    Re: Laminating a table top
    A message posted at WOODWEB's Veneer Forum (10/24/22) -- Bad idea. That table will expolode or warp to heck. Use solid wood. ...

    Re: 5 piece cabinet door screw up
    A message posted at WOODWEB's Cabinetmaking Forum (10/24/22) -- You win. That really must have hurt. ...

    Re: Mold mildew on red oak
    A message posted at WOODWEB's Sawing and Drying Forum (10/24/21) -- Yes Tim, it is intended as an outdoor piece. I chose the linseed because I believ ...

    Re: Mold mildew on red oak
    A message posted at WOODWEB's Sawing and Drying Forum (10/24/21) -- The evidence of the dark staining in the heart of the wood seat area shows that f ...

    Re: Wide Belt sander indeed/outfeed
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24/21) -- I think Bosch and Makita sanders work pretty well, with rounder surfaces ...

    Re: Mold mildew on red oak
    A message posted at WOODWEB's Sawing and Drying Forum (10/24/21) -- There is a thread recently on appropriate finishes for teak furniture that mentio ...

    Re: Sanders at the bench
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24/21) -- I think Bosch and Makita sanders work pretty well, with rounder surfaces ...

    Sac shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24/21) -- Need help identifying switch on top of control I don’t have a user manual . Mo ...

    Re: Start over with your dream shop/business
    A message posted at WOODWEB's Business and Management Forum (10/24) -- I love all of you on here because the brotherhood of sawdust makers are the on ...

    Re: WB Coatings - successive layer orange peel texture
    A message posted at WOODWEB's Finishing Forum (10/24) -- Thanks for the responses folks. Shane: are you suggesting to retard at 2 parts, reduce at 1 ...

    Re: Covid, Extra deliveries, good customer, how would you handle this?
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Thanks, We are going to have to bill them regardless. If they are willing and ...

    Re: Tandems - Anyone else have this issue?
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- I checked the rear up/down adjustment on about 36 slides I had installed. They were all ...

    Re: WB Coatings - successive layer orange peel texture
    A message posted at WOODWEB's Finishing Forum (10/24) -- Id argure that the water tends to look better the next day ;-). The shrink back is definitel ...

    CODA Primer
    A message posted at WOODWEB's Finishing Forum (10/24) -- I just tried out Coda primer. Im used to working with MLC's clawlock. The coda primer seemed ...

    Re: RE: Heating System & Dust Collection
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/24) -- RE: Heating.... Whats your issue? Are you not going to be using ...

    Re: CODA Primer
    A message posted at WOODWEB's Finishing Forum (10/24) -- I'm also dealing with a very thick primer at the moment, Rudd Miravar surfacer. I had to tur ...

    Re: Tandems - Anyone else have this issue?
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- same here I just inset the slide the full 1/8"and it doesn't really show. a few tho ...

    Re: Side mount soft close drawer slides
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- Worth louis and co has a nice soft close side mount , works well if you build a square b ...

    Re: China Trade War & US Lumber Companies
    A message posted at WOODWEB's Business and Management Forum (10/24) -- You cant find any facts because the regurgitation your regurgitating is " ...

    Re: Job Names, avoiding confusion and overcomplexity
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Matt, by your description it sounds as if our company size is the same as our ...

    Adhesion problem Kem Aqua Plus
    A message posted at WOODWEB's Finishing Forum (10/24) -- Hi folks, So I am having some adhesion issues on some stain samples and wondering if anyone ...

    Contour Edgebanding
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- Okay, I've searched this forum and not a lot came up on this. I'm taking on an ongoing p ...

    Re: Job Names, avoiding confusion and overcomplexity
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Adam that is very helpful and reinforces to me some of the formats that have b ...

    Re: Adhesion problem Kem Aqua Plus
    A message posted at WOODWEB's Finishing Forum (10/24) -- You said you used Seal Coat after allowing the BAC to dry for 3 hours. Seal Coat is shellac, ...

    Re: Adhesion problem Kem Aqua Plus
    A message posted at WOODWEB's Finishing Forum (10/24) -- John is correct in his approx dry times. We have used MLC Woodsong solvent stains for a long ...

    Re: Inventor vs. Solidworks
    A message posted at WOODWEB's CAD Forum (10/24) -- Inventor and SOLIDWORKS are two of the leading CAD modeling platforms utilized in most of the indu ...

    Re: Adhesion problem Kem Aqua Plus
    A message posted at WOODWEB's Finishing Forum (10/24) -- Whats the pigment load in the stain? How clean are you wiping it off? Why "try" to ...

    Re: China Trade War & US Lumber Companies
    A message posted at WOODWEB's Business and Management Forum (10/24) -- The middle class is disappearing because they are becoming richer. The economy ...

    Re: Thought Doveails
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24) -- Hello Jerry, it depends on the machine but many can be set to run through dovetai ...

    Re: Adhesion problem Kem Aqua Plus
    A message posted at WOODWEB's Finishing Forum (10/24) -- Mohawk stains dry pretty fast, probably why no issues there.Use waterbased stain. Likely no ...

    Re: High Build Piano Style Finishing
    A message posted at WOODWEB's Finishing Forum (10/24) -- Arthur, Just wondering are you reworking Pianolac? Looked for the website and couldn't find ...

    Re: High Build Piano Style Finishing
    A message posted at WOODWEB's Finishing Forum (10/24) -- Thanks, Dan, Bob and Shane. Your answers help me in my development of a waterborne piano coa ...

    Re: Grizzly 3100Z Twin Drum Sander Belt Tracking Problems
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- Sorry should have been 1066Z sander ...

    Re: High Build Piano Style Finishing
    A message posted at WOODWEB's Finishing Forum (10/24) -- Yes, Bob, the new Pianolac will be released soon. ...

    Re: Wood ID
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- Teak? ...

    Re: Need Help with a problem
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Being a business owner I can understand that if everyone in the shop is eating ...

    Re: Sayerlack crazing over sealcoat
    A message posted at WOODWEB's Finishing Forum (10/24) -- Jonathon, I was amazed by my flower boxes. The difference between BIN and any other product ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/24) -- Pierre, I would encourage you to buy a decent high transfer gravity gun. That CAT x looks li ...

    Re: Need Help with a problem
    A message posted at WOODWEB's Business and Management Forum (10/24) -- The Two Truths of Interpersonal Relationships: 1. People will not change 2. Pe ...

    Re: Face Frame Cabinet Construction
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- That face frame application video is first in the queue for our next round of video foot ...

    Re: Face Frame Cabinet Construction
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- Just wanted to jump in here quickly to mention that we have many customers using our Lam ...

    Re: Adhesion issues
    A message posted at WOODWEB's Finishing Forum (10/24) -- Tell us exactly how your mixing the kemvar.... product# catalyst# reducer's, retarder's etc ...

    5x10 Nested base routers for 40K-60K range
    A message posted at WOODWEB's CNC Forum (10/24) -- We are looking to purchase our first cnc router. Looking to get a 5x10 table with vac and auto too ...

    Re: Face Frame Cabinet Construction
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- We sand the inside edge of the bot rail with then it finishes even with the ply. Its a 1 ...

    Re: Dirty finish, That time of year again
    A message posted at WOODWEB's Finishing Forum (10/24) -- we spray conversion varnish also and are in the northern part of the country dry winters. I ...

    Re: Need Help with a problem
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Well I tried, He did nothing about fixing the unsafe electric or anything else ...

    Re: AutoCAD Setting
    A message posted at WOODWEB's CAD Forum (10/24) -- I feel that raster images have so many Osnap points that it helps to do a ctrl + right click to na ...

    Re: Help with Indian Drafting Company
    A message posted at WOODWEB's CAD Forum (10/24) -- This is a topic I hear quite often and it's not just a language barrier that limits the usefulness ...

    Re: Sayerlack crazing over sealcoat
    A message posted at WOODWEB's Finishing Forum (10/24) -- Yeah 6 coats is a bummer. It's actually more like 5 1/2 but still it is what it is. With 5 c ...

    Re: Adhesion issues
    A message posted at WOODWEB's Finishing Forum (10/24) -- Im running a bleach job right now on red grandis solid with that exact same topcoat.... we a ...

    Re: defect in select white oak KD
    A message posted at WOODWEB's Sawing and Drying Forum (10/24) -- Did you buy the lumber "with defect"? If so, it is yours unless they will ...

    Re: Gluing up radius jambs
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- I put a 1/16" flat steel band ( same width as jamb) over the male mould ...

    Re: defect in select white oak KD
    A message posted at WOODWEB's Sawing and Drying Forum (10/24) -- We bought the lumber as Select 6/4 rift white oak and there was no mention of defect ...

    Re: Gluing up radius jambs
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- The glue is not the likely source of moisture as it is PU. I would use a moi ...

    Re: Dirty finish, That time of year again
    A message posted at WOODWEB's Finishing Forum (10/24) -- is what you are experiencing constant for the winter months, or lasting a month or so while ...

    Re: Adhesion issues
    A message posted at WOODWEB's Finishing Forum (10/24) -- If you're thinning with lacquer thinner then that's probably the culprit. Most lacquer thinn ...

    Re: Gluing up radius jambs
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- Hi Peter, I may have misunderstood your layout of the lamination layers. You ...

    Re: Dirty finish, That time of year again
    A message posted at WOODWEB's Finishing Forum (10/24) -- The problem mostly goes away after e few weeks. I do have a humidifier that hangs from the c ...

    Re: Face Frame Cabinet Construction
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- Chris H, how do you adjust the Lamelllo Zeta P2 to account for inner reveals on the face ...

    Re: Sayerlack crazing over sealcoat
    A message posted at WOODWEB's Finishing Forum (10/24) -- Adam, Have you used Ultra since Muralo company was sold to California Paints? I heard it's n ...

    Re: Need Help with a problem
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Hello Skip. Don't know what part of the country you are in but if you are in t ...

    Re: Dirty finish, That time of year again
    A message posted at WOODWEB's Finishing Forum (10/24) -- gary, the finish does dry a little faster but without bubbles/trash. mine might be unrelated ...

    Re: Adhesion issues
    A message posted at WOODWEB's Finishing Forum (10/24) -- this time of year with the cold the finish can act a little thicker. If you're not reducing ...

    Re: Need Help with a problem
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Hi Puzzleman, I live on long Island in about the center which is part on New Y ...

    Thermofoil Cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- Looking to for someone to build cabinet with thermofoil material on exposed surfaces of ...

    Re: Gluing up radius jambs
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- I think your unbalanced construction might be the source of the problem. Sep ...

    Re: Gluing up radius jambs
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- Fred, We thought that as well. We will not be doing that in the future. Than ...

    Re: Dirty finish, That time of year again
    A message posted at WOODWEB's Finishing Forum (10/24) -- If it's static electricity then spray your fist coat, scuff and then wipe down with denature ...

    Re: Adhesion issues
    A message posted at WOODWEB's Finishing Forum (10/24) -- Using kemvar dull rubbed effect v84 f 83 catalyst v66 v 21. Using as self sealer. Scuffing w ...

    Re: UGH. ...I need software what gives the best cutlists?
    A message posted at WOODWEB's CAD Forum (10/24) -- Thanks for the info. How is pricing structured for Mozaic in terms of your cabinet configuration? ...

    Re: Gluing up radius jambs
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- Tom, Thanks, I will try that as we do resaw then sand them and lay them up. ...

    Drying Redwood Lumber
    A message posted at WOODWEB's Sawing and Drying Forum (10/24) -- I have a customer that wants to dry Redwood Lumber. Can you tell me where I can find ...

    Re: 5x10 Nested base routers for 40K-60K range
    A message posted at WOODWEB's CNC Forum (10/24) -- you may have to spend a bit more, but check out shopsabre. made in MN, very high quality, and the ...

    How do I accomplish this finish?
    A message posted at WOODWEB's Finishing Forum (10/24) -- How do I accomplish this finish? looks like toner in lacquer floating/separation. You can se ...

    Re: poplar turned table legs
    A message posted at WOODWEB's Furniture Making Forum (10/24) -- Poplar splits very easily. It is also soft as was mentioned. Soft Maple is twice the ...

    Re: LVL & Garage Door Build??
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- David, wondering what type of stop/weather strip that is. Looks nice and cle ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/24) -- Jonathan you know what your doing if you know what the wink is.... good to hear! ...

    Re: Face Frame Cabinet Construction
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- Adam, We are in Ct as well. ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/24) -- We have had very good luck with Craigslist. Whenever we run an ad we get 20-25 ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Cabmaker, All that's nice, but this is a business. Are you making money? Becau ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/24) -- "Good citizenship characteristics"? How do you filter for that? Play ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/24) -- FamilyMan, I thought you lived out in the sticks, not in the weeds. I would ha ...

    Re: Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24) -- I basically make only Baltic Birch drawers. I actually like the look of the plys, ...

    Re: Drying a large slab of sugar maple
    A message posted at WOODWEB's Sawing and Drying Forum (10/24) -- A few things... Hopefully you have already sealed it, if your goal is to avoid crack ...

    Re: DO NOT use PVC duct for dust collection
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/24) -- Here's a link to an annotated description of the episode. It's c ...

    Re: Veneering a Cylinder
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- One solution is to use standard Titebond glue in a contact cement sort of ap ...

    Re: DO NOT use PVC duct for dust collection
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/24) -- It was never really a case of the dust catching fire inside of t ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Brogan, As you have probably already concluded recruitment and training will b ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/24) -- I forgot to mention, bucket brigades always crash the first time you try to ru ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/24) -- David, "Good citizenship characteristics" was not intended as a dog ...

    Re: Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24) -- I don't have a real world answer for you. The specs on my machine say 7 7/8" ...

    Error Msg: "AlphaCAM has stopped working..."
    A message posted at WOODWEB's CAD Forum (10/24) -- I receive this message when I add or change tool paths to my AlphaCAM drawings: "A problem ha ...

    Re: Veneering a Cylinder
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- If you already have the skills and knowledge of vac bagging I would use one. ...

    Re: bowed cabinet door
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- I have heard about the Hafele product and its success. I have no doubt it works. But: I ...

    Re: Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24) -- I am still waffling on a purchase. At this point I don't offer them and am able t ...

    Re: Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24) -- We have the same machine Leo has. We make 50 or so boxes a month and have had the ...

    Re: Veneering a Cylinder
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- Thanks guys, Matt- I have looked this route but have not found anyone that w ...

    Re: Veneering a Cylinder
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- Outsourcing is a reasonable option. If you are bent on doing it yourself con ...

    Re: Oil, film or nothing
    A message posted at WOODWEB's Finishing Forum (10/24) -- I think that the film will be the best protection and ease of maintenance. The teak color wi ...

    Re: Drying a large slab of sugar maple
    A message posted at WOODWEB's Sawing and Drying Forum (10/24) -- I hope you have coated the end grain with anchorseal already. It is most effective w ...

    Re: Any luck with FB ads? (no wsj graphs)
    A message posted at WOODWEB's Business and Management Forum (10/24) -- although I do not use it, I have a friend doing general remodeling who says he ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Cabmaker, How many guys do you employee to make "about" 10k-15k a we ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Thanks for the input everyone. We have a community college about 15 min away. ...

    Re: Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24) -- Leo, I meant width of drawer not height. sometimes I am forced into making 9" ...

    Microvellum
    A message posted at WOODWEB's CNC Forum (10/24) -- Is there anyone in the greater NYC area who is currently runnning Microvellum in their cabinet sho ...

    Re: Veneering a Cylinder
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- We just order them. http://www.tapeease.com/Wood%20Cylinders.htm Love an adv ...

    Re: Error Msg: "AlphaCAM has stopped working..."
    A message posted at WOODWEB's CAD Forum (10/24) -- It sounds like you have a corrupt .mdb file. I would try a reinstall if you don't have the file in ...

    Re: CABINET INSTALLER PRICING
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/24) -- Most of our 15-20 cabinet jobs go for 1200-1500 install. That includ ...

    Re: Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24) -- Narrowest I've done on my machine is 3 3/8". It says it can go down to about ...

    Re: Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24) -- What is the minimum with of drawer you can make with this machine and be able to ...

    Re: Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24) -- Curious, why use Ash for the drawers? Never thought to use ash. ...

    Re: Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24) -- Thanks. I figured it'd be a bit grainy for a smooth finish. ...

    Re: Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24) -- Ash is readily available in my area, and machines nicely. ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Sorry man... ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/24) -- I got side tracked on that last rant. I meant to respond to what Jerry's comme ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Jerry's comment regarding putting all of your cabinets on carts is an importan ...

    Re: federated insurance/like kind and quality
    A message posted at WOODWEB's Business and Management Forum (10/24) -- We switched to Federated a couple of years ago and are highly impressed. We sw ...

    Marketing Advice / Inspiration
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Custom Cabinet shop in need of marketing ideas. 7 Person custom cabinet shop i ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/24) -- You could solve the drawer box conundrum by having everybody just fix what bug ...

    Re: Critique this CNC-cut frameless sink base
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- I'm the o.p. and appreciate the comments here. The design, done in eCabinets and meant t ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/24) -- I was an anti-lean guy for years and years. Thought it was just a conspiracy t ...

    Re: Problem with paint on sapele
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- Milton, Ive seen this problem also with a Sherwin Williams product. I didn't ...

    Re: Is Selling And Installing Rollout Shelves A Viable Business
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Tony, I think this could be a great sideline business for your window treatmen ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Now you have the basics in place to have a bucket brigade. Since all of your s ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Thank you all for the great feedback, please keep it coming as I have to belie ...

    Re: Critique this CNC-cut frameless sink base
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- I'd drop the false front and run the doors all the way up with a valance behind them. I ...

    Which turbine air gun to look at?
    A message posted at WOODWEB's Finishing Forum (10/24) -- Just picked up an Apollo 800 turbine in very good condition and am looking around for a dece ...

    Double Edge Easing/Round Over
    A message posted at WOODWEB's CNC Forum (10/24) -- Have an application where we would like to fixture some chair parts and profile/double edge ease, ...

    Re: Moving melamine???
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- Jeff, check with your supplier to find out what product/quality they are sending you. 90 ...

    Re: temperature and finish
    A message posted at WOODWEB's Finishing Forum (10/24) -- From a production standpoint, I can assure you that the Sherwood and Kemvar lines of CV from ...

    Re: temperature and finish
    A message posted at WOODWEB's Finishing Forum (10/24) -- Indeed, cure times in low temp are seriously delayed. cold weather makes the finish harden w ...

    Re: Light Duty Shaper Comparisons
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24) -- There is definitely a difference between the two. Both are definitely "light ...

    Re: Grand Piano Legs
    A message posted at WOODWEB's Furniture Making Forum (10/24) -- Willem, The legs that I have seen on these pianos have all been faux finished to matc ...

    Re: Marketing Advice / Inspiration
    A message posted at WOODWEB's Business and Management Forum (10/24) -- We are wholesale only but I do go out and take a bottle of wine or something n ...

    Re: Color matching with various stains
    A message posted at WOODWEB's Finishing Forum (10/24) -- the umbers are pigment! and if i understand your question, you would like to match those umb ...

    Re: Toekick Construction Methods
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- I also use D, just my preference and habit. I have used A but was never real fond of hav ...

    Re: Color matching with various stains
    A message posted at WOODWEB's Finishing Forum (10/24) -- I use 844's and Phoenix colorants to mix my CVs with. There has to be a formula that allows ...

    Re: Stain match
    A message posted at WOODWEB's Finishing Forum (10/24) -- Rift cut oak is the strightest grain you'll get. Tho the grain is deep and if using a CV may ...

    Re: federated insurance/like kind and quality
    A message posted at WOODWEB's Business and Management Forum (10/24) -- thanks for all the replies. cost-wise, i'm identical to what i'm currently pay ...

    Re: Marketing Advice / Inspiration
    A message posted at WOODWEB's Business and Management Forum (10/24) -- I truly feel it depends on your market? Where are you located....whats the ave ...

    Re: Staining Eastern Hemlock
    A message posted at WOODWEB's Finishing Forum (10/24) -- I agree with Nick's suggestion about adding a Dye stain.....still need to make a sample boar ...

    Re: Anyone using composite nails (like Raptor?)
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/24) -- Interesting, Andrew, thanks for sharing that. I wasn't aware that th ...

    Reducing sanding time/finishing processes
    A message posted at WOODWEB's Finishing Forum (10/24) -- Hello all, I am a small shop that makes accents, mainly big chunky wood letters. I am wantin ...

    Re: temperature and finish
    A message posted at WOODWEB's Finishing Forum (10/24) -- Have sprayed all coatings in 30 den during winter... Never a problem. Tho Cv can give textur ...

    Re: Which turbine air gun to look at?
    A message posted at WOODWEB's Finishing Forum (10/24) -- Be forwarned, good turbine guns are spendy. The four l would look at are; Graco, Appollo (l ...

    Re: Looking for advice from the pros
    A message posted at WOODWEB's Finishing Forum (10/24) -- all the answer that you got are good but my guess is that they shaded the colour, when they ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Again I digress. What I meant to say is that by formally sequencing your proce ...

    Re: Reducing sanding time/finishing processes
    A message posted at WOODWEB's Finishing Forum (10/24) -- If you don't want to have any details that remain crisp, they can work. You didn't mention w ...

    Re: "Specks" in Chemcraft Pigmented Varnish
    A message posted at WOODWEB's Finishing Forum (10/24) -- maybe they flat it down and the powder is not dissolve properly or maybe when they tinted yo ...

    Re: Reducing sanding time/finishing processes
    A message posted at WOODWEB's Finishing Forum (10/24) -- look into the " Fladder" Brand sanders for what your doing this sounds like the pe ...

    Re: Makita 2012NB Adjust Plate
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24) -- Bought from Japan, and it is 2 in 1 plate which combines adjust plate on set plat ...

    Re: Grand Piano Legs
    A message posted at WOODWEB's Furniture Making Forum (10/24) -- David, thx for the advice, appreciated. Did you laminate 8/4 and make the hexagonal p ...

    Re: Moving melamine???
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- Banana Boards!! Talk to Rudy at Colonial Saw in MA and he'll explain the science of hot ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Pat, If I recall correctly, Paul does before and after videos, most of the tim ...

    True divided Muntin bars in CNC
    A message posted at WOODWEB's CNC Forum (10/24) -- Has anyone done this with success ? I am starting to put my head into this but wondering if it's w ...

    Re: Grand Piano Legs
    A message posted at WOODWEB's Furniture Making Forum (10/24) -- Willem, Yes, I used to produce these legs for several piano restoration companies. So ...

    Acetone
    A message posted at WOODWEB's Finishing Forum (10/24) -- What is the difference between different brands of acetone if any? (Chemlife, Sherman Willia ...

    Re: Matching needle to nozzle
    A message posted at WOODWEB's Finishing Forum (10/24) -- I use the eom touch up.. good gun but needles are marked. Would never but another. I use bin ...

    Re: Acetone
    A message posted at WOODWEB's Finishing Forum (10/24) -- I think that solvents can be equated to gasoline. Basically its all gas, but the difference ...

    Re: Acetone
    A message posted at WOODWEB's Finishing Forum (10/24) -- typically you can get a lot of cost difference is the solvent is a blend of virgin and recla ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/24) -- "Somebody has to formally list the processes." How do you go about t ...

    Re: Flexable coating
    A message posted at WOODWEB's Finishing Forum (10/24) -- try a vinyl sealer or primer under it's more flexible. specialy on hardwood like maple it al ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/24) -- @ Derek, thank you for the video link, makes a lot of sense. BTW are you the D ...

    Re: Grand Piano Legs
    A message posted at WOODWEB's Furniture Making Forum (10/24) -- I'd job that out to someone with a 5 axis cnc Then veneer the hex section. Easy money ...

    Re: finish room lighting
    A message posted at WOODWEB's Finishing Forum (10/24) -- get a light booth they have a lot of different light option, so you can match it under your ...

    Re: Parts cart
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- You can buy something like this from Hafele for about two hundred dollars. I use mine fo ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Adam, Short answer is yes you should share. Longer answer is here in 9 minute ...

    Re: Stain match
    A message posted at WOODWEB's Finishing Forum (10/24) -- Sorry, I misread. I thought you were trying to match the color. Still, a picture would reall ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Relying on kumbaya as a management strategy has some weak spots in it. ...

    Re: Reducing sanding time/finishing processes
    A message posted at WOODWEB's Finishing Forum (10/24) -- Sandrite also makes a sander that might work for you. ...

    Re: Double Edge Easing/Round Over
    A message posted at WOODWEB's CNC Forum (10/24) -- Sorry guys, Just found the Schmidt RH100. Problem solved. ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Oos https://youtu.be/rDJkNnTX_9A ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/24) -- The entire staff learning Lean ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Adam, Yep thats me. ...

    Re: Re coat window on 2k poly
    A message posted at WOODWEB's Finishing Forum (10/24) -- 8 hours after sanding ...

    Re: Gun Cleaner for cured Agualente Plus
    A message posted at WOODWEB's Finishing Forum (10/24) -- MEK ...

    Re: Stain match
    A message posted at WOODWEB's Finishing Forum (10/24) -- Rift cut white oak ...

    Re: 2 ply vs 10 mil?
    A message posted at WOODWEB's Veneer Forum (10/24) -- 2-ply doesn't really tell us much. Paper back is 2 ply. I'm guessing you mean 2-plys of veneer, ...

    Re: Holz-her glue station
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- Dave this is amazing or at least no coincidence. On friday I had the same thing happen w ...

    Re: Restaurant Vanity
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/24) -- If it will be certified or inspected by a code 34" to the top o ...

    Install van fit up
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/24) -- I recently bought a 2015 Ford Transit 250 for hauling tools and mate ...

    Re: Sources for woven wire grills...
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- I've tried to find it cheaper as well, in the end its all expensive. The las ...

    Re: Holzher edgebander parts
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- Don't know the machine at all, but if it's part of the FRL where the air comes in, just ...

    Re: Restaurant Vanity
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/24) -- Thanks for the info Jim n Kip,The kitchen Im building is for transie ...

    Re: Holzher edgebander parts
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- Call Lee or Chris Johnson at Lakeside Industrial. They are great people and will have wh ...

    Re: Ipe Deck Problems
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- I have seen "shelling" occur fairly often. Not in so numerous of b ...

    Russian vs. American White Oak
    A message posted at WOODWEB's Sawing and Drying Forum (10/24) -- What is the actual difference in appearance and Janka rating for Russian white oak i ...

    Re: Recovering from burnout?
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Good One, Cabmaker. I suppose the trick is to look at it "when wisdom's c ...

    Re: Holzher Rep
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- call Lee or Chris Johnson at Lakeside Industrial. Great people. http://www.lakesideindus ...

    Re: Exterior finish for mahogany
    A message posted at WOODWEB's Finishing Forum (10/24) -- i second the Epifanes varnish, especially if you first seal with Smith's penetrating epoxy ...

    Re: Importing .skp into Cabinet Vision
    A message posted at WOODWEB's CAD Forum (10/24) -- Thanks guys! I had no idea. I really appreciate the help. ...

    Re: Sources for woven wire grills...
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- http://kentdesign.com ...

    Re: Recovering from burnout?
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Projects: ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (10/24) -- Pat, I will answer you and the gentleman who asked how much TopSolid costs. After having paid abou ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (10/24) -- Don, Just in the last few months, my decade long quest to decide on what software to use and how t ...

    Re: Any proficient Mozaik users here? I am considering it and have question
    A message posted at WOODWEB's CAD Forum (10/24) -- Ok thank you. So I have been watching the detailed videos on your website outlining certain detail ...

    Re: Speed Up Gluing on Exterior Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- You can get adhesive formulations that cure faster. This is possibly the bes ...

    Re: Caulking Panels in Entry Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- We typically just make a plow and raise the panels to fit, so there are no l ...

    Re: Pattern Systems with Windows 7 32 Bit:
    A message posted at WOODWEB's CAD Forum (10/24) -- Hi Jim, My first suggestion would to go back to WINXP. But if you can't then we should be able to ...

    Re: Caulking Panels in Entry Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- We have used the Euro method David mentioned for a while now. Basically trea ...

    Caulking Panels in Entry Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- Over the past 8 years we have had two entry doors that have leaked water thr ...

    Re: Millwork walls in cabinetvision??
    A message posted at WOODWEB's CAD Forum (10/24) -- I don't know what SCM is. In Cabnetware I would just set the parameters for the correct depth, dra ...

    Pattern Systems with Windows 7 32 Bit:
    A message posted at WOODWEB's CAD Forum (10/24) -- Someone within my company has decided I needed to upgrade my computer. From A really good and stil ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (10/24) -- Thanks Derek Between us we probably have a half a century of experience in 3d. Originally I got in ...

    Re: Mozaik - Are they still in business?
    A message posted at WOODWEB's CAD Forum (10/24) -- Hi Stephan, We have something similar with Cabinet Pro software. A user sends in a technical suppo ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (10/24) -- Pat, Imagine if you had to draw every store fixture in 3D, and each had a order quantity of 1. You ...

    Re: woodmaster planer
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/24) -- I think I have a plan to make my piping to the planer. The inlet ...

    Re: Caulking Panels in Entry Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- Thanks Dave for forwarding the Thread - looks like he experienced the same t ...

    Re: Speed Up Gluing on Exterior Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- I appreciate the feedback from everyone. I have brought back all this inform ...

    What is the best planer?
    A message posted at WOODWEB's Solid Wood Machining Forum (10/24) -- I am looking for some advice from any of you who have experience with large plane ...

    Re: Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (10/24) -- There is a tendency with a light weight wood like cedar to use too much pressure. We never c ...

    Re: Millwork walls in cabinetvision??
    A message posted at WOODWEB's CAD Forum (10/24) -- I did that in cv but when you go to lengthen the wall It does not work out correctly. Not sure wha ...

    Re: Caulking Panels in Entry Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- Have you considered a product such as Sherwin Williams Elastromeric Urethane ...

    Re: Any proficient Mozaik users here? I am considering it and have question
    A message posted at WOODWEB's CAD Forum (10/24) -- Hi Stephan, Yes, I am the president and programmer for Cabinet Pro. Ask any questions you want. I ...

    Fleece back vs Kraft back on edge banding
    A message posted at WOODWEB's Veneer Forum (10/24) -- Not quite veneering but it as close as I can come within the different forums. I don't have a b ...

    Biesse Arrow TE059 Error
    A message posted at WOODWEB's CNC Forum (10/24) -- Good Evening I have a new to me Biesse Arrow with an OSAI control that I'm trying to get going. Wh ...

    Re: exterior glue
    A message posted at WOODWEB's Adhesives Forum (10/24) -- Resorcinol, which is really RF, is best. UF, TB III and PUR are not too bad either. All have ...

    Re: Better pull/knob drilling jig?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/24) -- For the S&H Jig users, what happens when you want the pull off c ...

    Re: Pattern Systems with Windows 7 32 Bit:
    A message posted at WOODWEB's CAD Forum (10/24) -- Sometimes windows security has things on in the firewall that affect the ability to run even thoug ...

    pedestal table
    A message posted at WOODWEB's WOODnetWORK Forum (10/24) -- I am repairing a slide out round pedestal table. I need help as I am not sure how the pede ...

    Re: White or yellow?
    A message posted at WOODWEB's Adhesives Forum (10/24) -- Ditto on what Jeff and Ken said about color. In my experience, it is usually the poor prepar ...

    Re: Caulking Panels in Entry Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- There was a pretty good discussion on this subject in August. As for the cau ...

    Re: Better pull/knob drilling jig?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/24) -- heres the place I found that sells the s and h. looks super cool but ...

    Contract AlphaCam Programer
    A message posted at WOODWEB's CAD Forum (10/24) -- I have a customer looking for someone in the Southern California area to do some contract programi ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (10/24) -- Damn Derek your story is starting to resemble Mark Poole's... Sorry to hear that. So what now Soli ...

    Re: Rosewood lumber/veneer source
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- How old is the original, and why is it being replaced? ...

    Re: Caulking Panels in Entry Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (10/24) -- Here are a couple drawings similar to what we do. ...

    Re: large oak burl
    A message posted at WOODWEB's Sawing and Drying Forum (10/24) -- I can't imagine anything harder to dry than a White Oak burl. ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (10/24) -- Believe me I get it. ...

    Re: Marketability for Highly Figured Aspen
    A message posted at WOODWEB's Veneer Forum (10/24) -- Not sure how you would market that material, it probably depends on the volume available. Maybe ...

    Re: Marketability for Highly Figured Aspen
    A message posted at WOODWEB's Veneer Forum (10/24) -- Let's assume that the supply and quality in a given region (NE North America) is good (always a ...

    Re: Marketability for Highly Figured Aspen
    A message posted at WOODWEB's Veneer Forum (10/24) -- We use it for cross banding for 2 & 3 ply bending veneer in our pressing operation. I actua ...

    Re: Automataic dim setup
    A message posted at WOODWEB's CAD Forum (10/24) -- thank you Alex for the link that really helped but was wondering if you know what programing langu ...

    Re: Sheet goods pinching on sliding table saw
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/24) -- Watch how many times you get your blades sharpened as your kerf ...

    Canvas
    A message posted at WOODWEB's Furniture Making Forum (10/24) -- Does anyone know the name of the technique of using canvas for a lower cabinet top or ...

    Re: Wilsonart Glue Failure
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/24) -- What substrate? I have seen perfect workmanship delaminate into the ...

    Window Trim pricing (complete)
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/24) -- I'm figuring some interior trim pricing and would like some input. D ...

    need advice for laminating 8/4 Hickory
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/24) -- I need to glue up a 4' x 8' island top in 8/4 Calico Hickory for a clie ...

    what's the best glue to use for Calico Hickory?
    A message posted at WOODWEB's Adhesives Forum (10/24) -- Hi everyone, I have just brought in some 8/4 Calico Hickory for a large 4' x 8' counter top ...

    manifold
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/24) -- We are setting up a weinig u-17-a, 5+1 head molder, with 5'' ope ...

    Re: Window Trim pricing (complete)
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/24) -- By the way....I'm in the middle of the country where house prices av ...

    Re: Window Trim pricing (complete)
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/24) -- Yes, way low. Assuming your pricing includes trim material, finishin ...

    Fold-up Veneer vacuum table recommendations
    A message posted at WOODWEB's Veneer Forum (9/24/24) -- We are looking to get a veneer vacuum table sufficient to handle a few sheets at a time, idea ...

    Re: 2023 CR Onsrud Router Defective Phenolic Table
    A message posted at WOODWEB's CNC Forum (9/24/24) -- James, I have done programming for customers with B&R controls. I have heard nothing good ab ...

    Cantec straight line rip saw
    A message posted at WOODWEB's WOODnetWORK Forum (9/24/24) -- I am having trouble with my Cantec straight line saw. It is cutting boards like bananas! ...

    Re: Table saw opinions
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24/24) -- Even after using some of the old saws like I said above, I would still buy ...

    Re: Hardware change
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/24) -- I’ve been using Salice hinges since mid 90’s. There new slides are very nice. Dennis w ...

    Re: Complete Noob CNC machine and advice
    A message posted at WOODWEB's CNC Forum (9/24/24) -- Joe, Good luck. For more information, several of the manufacturers also have forums that can be ...

    Re: Complete Noob CNC machine and advice
    A message posted at WOODWEB's CNC Forum (9/24/24) -- Hey All, Thank you very much for your feedback and advice, I really appreciate it and will look ...

    Re: Shopping advice for high-end 5 axis router
    A message posted at WOODWEB's CNC Forum (9/24/24) -- Welcome to visit : www.rhinocncmachine.com ...

    Re: Bubbles
    A message posted at WOODWEB's Adhesives Forum (9/24/24) -- Im facing the same issue. ...

    Re: How is anyone getting the dreaded "bleached white oak flooring" look, c
    A message posted at WOODWEB's Finishing Forum (9/24/23) -- I would disagree with your statement that the flooring companies are not grading for color ...

    Fancier than white (melamine boards)
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/23) -- We've been using 3/4" white melamine particle boards to build frameless cabinet c ...

    Re: How is anyone getting the dreaded "bleached white oak flooring" look, c
    A message posted at WOODWEB's Finishing Forum (9/24/23) -- In addition, reach out to whoever the flooring manufacturer is on your jobs and see if you ...

    Re: Hinges for an inset overlay panel
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/23) -- Hinge a plywood panel with a standard flush inset hinge (off the shelf) and apply a 1/ ...

    Re: Straight cuts have an Arc.
    A message posted at WOODWEB's CNC Forum (9/24/23) -- What you are seeing is most likely tension released in the material. It is unlikely that it is a ...

    Re: Pledge/Silicone contamination
    A message posted at WOODWEB's Finishing Forum (9/24/23) -- The general recommendation for older kitchens is TSP followed by denatured alcohol. Then u ...

    Re: Timesaver 137-2HP75 manual
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/24/23) -- Hi Dan - I am also looking for the same manual. Timesaver 137-2HP. ...

    Re: Straight cuts have an Arc.
    A message posted at WOODWEB's CNC Forum (9/24/23) -- I do leave an onion skin on all my parts and then a final cut with an .03 offset. The diffrence ...

    Re: RE: Best Chainsaw for Ripping Logs
    A message posted at WOODWEB's Sawing and Drying Forum (9/24/22) -- Update: I decided to spring for the MS881. It is a bit more powerful and heavier. ...

    Re: Proper wages and classification
    A message posted at WOODWEB's Business and Management Forum (9/24/22) -- He has been working summers through high school and every chance besides. I ...

    Rustic alder melamine
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/22) -- Ever used it? For a frameless job for which the exposed face of everything is from Wal ...

    Re: Proper wages and classification
    A message posted at WOODWEB's Business and Management Forum (9/24/22) -- Wow, we don't hear this often. It sounds to me like you have a one in a hund ...

    Removable panel detail - island back side
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/22) -- The view shown here is the concept for a build that will go in about three months. New ...

    Door Reveals are off using cnc and edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/22) -- Our first vanity project but our door reveals are off . We premill the tape thickness ...

    Re: Proper wages and classification
    A message posted at WOODWEB's Business and Management Forum (9/24/22) -- Pay him what it takes for him to pay his bills and some to feel his value in ...

    Re: Proper wages and classification
    A message posted at WOODWEB's Business and Management Forum (9/24/22) -- I'm with SteveL, give him a huge raise! Paying him minimum wage is sending h ...

    Re: Door Reveals are off using cnc and edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/22) -- I don't use CV, but my guess is it's accounting for the banding thickness and you need ...

    Re: How and Where to sell a lot of Mesquite?
    A message posted at WOODWEB's Business and Management Forum (9/24/22) -- OK this is sitting in Imperial Valley, Ca. and has been for decades. How / w ...

    Re: How and Where to sell a lot of Mesquite?
    A message posted at WOODWEB's Business and Management Forum (9/24/22) -- OK this is sitting in Imperial Valley, Ca. and has been for decades. ...

    Re: Insert Shaper cutters C&S - which ones you like?
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/21) -- I have the DIT heads too (both small and large diameters. I like them once they're set ...

    Re: Identify molding
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24/21) -- LU: I have not seen a molding profile like the one pictured. To me, it loo ...

    25" vs 37" Wide Belt Sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/21) -- I've been seriously looking for a widebelt sander for a year now, both at new and used ...

    Figuring out trim per LF
    A message posted at WOODWEB's Business and Management Forum (9/24/21) -- A client recently asked me to give them a cost to change out the baseboards ...

    Re: Figuring out trim per LF
    A message posted at WOODWEB's Business and Management Forum (9/24/21) -- The hard part isn’t figuring out a job, rather it is trying to come up with ...

    Re: Curved (bent) Glass for Windows
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24/21) -- Lessons Learned is a great tool. Good for management, as they know when to ...

    Re: Metal Door Hinges
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/21) -- Hey, David. I actually ordered my doors from Element Designs. The doors come machined ...

    Re: Identify molding
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24/21) -- Keeping in mind this is a typical custom one off mantle. Its not I'm guess ...

    Re: Shop-made spices'n'oils base pullout
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/21) -- Never built any, but I've incorporated the Rev-a-Shelf models into a couple kitchens. ...

    Re: shelf span
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/21) -- The cabinets in the photos are both torsion boxes of 1/4" MDF, ply 2 sides, with ...

    Re: shelf span
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/21) -- Yes - 1/8" "door skin", 1-1/4 x 1/2", and another 1/8" skin. ...

    Re: Identify molding
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24/21) -- Hello Would you be able to provide a little more information on this piece ...

    Re: 25" vs 37" Wide Belt Sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/21) -- Go with the 37 if you are wanting to be a source for sanding. A single tabletop is to ...

    Re: Jointer Setup
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24/21) -- Thank you all for the tips. I've been looking at Jet, Grizzly, and a few of the ...

    staining problem
    A message posted at WOODWEB's Finishing Forum (9/24/21) -- After I stained a oak table I built I had little shiny spots all over the top. I have done ...

    Re: Figuring out trim per LF
    A message posted at WOODWEB's Business and Management Forum (9/24/21) -- Dill, It is sad we still have contractors who are not willing to share advic ...

    Re: Clear Veneer tape Adhesive
    A message posted at WOODWEB's Adhesives Forum (9/24/21) -- You can also buy their speed tape direct from FastCap.com 3M also makes a really impressiv ...

    Re: Clear Veneer tape Adhesive
    A message posted at WOODWEB's Adhesives Forum (9/24/21) -- we found this stuff and were going to give it a try. But yes iron on application. Trying t ...

    Re: 25" vs 37" Wide Belt Sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/21) -- A foot will make a big difference in work space in your shop? If it does, then don't g ...

    Re: Figuring out trim per LF
    A message posted at WOODWEB's Business and Management Forum (9/24/21) -- Don't you have records on how many feet of trim went into a job and how long ...

    Re: table top
    A message posted at WOODWEB's Finishing Forum (9/24/21) -- Nancy, how low of a sheen is needed? Depending on how low it is you may have to sand and r ...

    Re: 25" vs 37" Wide Belt Sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/24/21) -- As soon as you get the 25"er you will realize how many things won't fit through i ...

    Re: Clear Veneer tape Adhesive
    A message posted at WOODWEB's Adhesives Forum (9/24/21) -- We're looking for a tape that is heat sensitive so it only adheres when heated not stick o ...

    Re: Clear Veneer tape Adhesive
    A message posted at WOODWEB's Adhesives Forum (9/24/21) -- All tapes are heat sensitive. Are you looking for some sort of edge banding hot melt adhes ...

    Re: table top
    A message posted at WOODWEB's Finishing Forum (9/24/21) -- Abralon foam disks by Mirka work great. You can get them in 2000,3000 & 4000 grit. Wet ...

    Re: Boring doors for hangline
    A message posted at WOODWEB's Finishing Forum (9/24/21) -- Bobbys If you use clear tape and spray over it,how exactly can you see thru? ...

    Re: Clear Veneer tape Adhesive
    A message posted at WOODWEB's Adhesives Forum (9/24/21) -- Fastcap. From Richelieu Hardware ...

    Re: Identify molding
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24/21) -- Looks custom to me. ...

    Re: table top
    A message posted at WOODWEB's Finishing Forum (9/24/21) -- 0000 steel wool ...

    Re: Best cad/Cad program suitable for custom-made furnishings
    A message posted at WOODWEB's CAD Forum (9/24) -- Hi Adam, the old saying "ask 5 different cabinetmakers haw to do something and you'll get 5 di ...

    Re: Frameless boxes per day
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- I still don't have enough data for my new setup, but with my old one, while building 3/4& ...

    Re: Stave core door glue for 3/16" veneer?
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- I use plastic resin (urea formaldehyde) for all of my doors, including stave ...

    Re: Frameless boxes per day
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- 2 man shop equals 10 man days (10 hours a day for me, 8 for helper) or 90 hours in a week ...

    Re: Floor to Ceiling Wall of Cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- I recommend that you buy the Builtin Furniture book. It’s got good ideas and plenty of pi ...

    Frameless boxes per day
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- I'm ramping up production this week and most of my systems are working well, helper is in ...

    Getting rid of pink color in alder
    A message posted at WOODWEB's Finishing Forum (9/24) -- I'm trying to get a cappuccino color (light brown) on alder and I keep getting the pink or re ...

    Re: New CNC Router
    A message posted at WOODWEB's CNC Forum (9/24) -- Hello, Have you considered to make custom parts by the overseas manufacturer? We are a professional ...

    Rehau or similar integrated handels
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Anyone do these? Cant find literature on how to apply these? Glue? How to clamp etc. We a ...

    Re: Getting rid of pink color in alder
    A message posted at WOODWEB's Finishing Forum (9/24) -- Add some yellow-green dye to kill off the pink. Very small amount in the clear. ...

    Wrought Iron Balusters
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- Does anyone have a good source for wrought iron balusters? Thanks. ...

    Re: Murphy bed
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Over the past few years, in my spare time, I have researched Murphy/Wall bed hardware qui ...

    Re: Making trim in a non-millwork shop....
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- One idea I haven't herd yet is how about a shaper? In over 30 years of cabinetmaking I ha ...

    Re: RE: Old Wood Veneer
    A message posted at WOODWEB's Veneer Forum (9/24) -- There are rules, then there are rules. So, if 1/4" is to be thought of as solid wood, then ...

    Re: Which CAD software is best for furniture designing and visualizing?
    A message posted at WOODWEB's CAD Forum (9/24) -- Sketchup, it is free and it has some apps for woodworking and a lot of woodworkers use it. And you ...

    Re: Making trim in a non-millwork shop....
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- The mail limitation of the W&H is the 2HP motor that drives it. For the money you spe ...

    Re: up and down play on undermount slides
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Gentlemen, The time for magnetics is here. The new (revised) Salice Exedra Pocket door sy ...

    Re: Murphy bed
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- The create a bed hardware and instructions were something for a homeowner. The latching s ...

    Re: Murphy bed
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- The Pardo mechanism is adjusted by turning a fairly large hex bolt on the end of the unit ...

    Vacuum pump overload(Omnitech)
    A message posted at WOODWEB's CNC Forum (9/24) -- Wondering is anyone would have some insight on a vacuum issue we are having. I run a omnitech selex ...

    Re: Murphy bed
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- I looked at your link and then at the build video on you tube. Still too hokey for me. It ...

    Re: Making trim in a non-millwork shop....
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- The LeoG method. I'm famous LOL. That's a one pass on the W&H, it's a pretty small mo ...

    Re: Murphy bed
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Bruce H, Thank you for the additional information. From your description, I think that yo ...

    Re: Which CAD software is best for furniture designing and visualizing?
    A message posted at WOODWEB's CAD Forum (9/24) -- For me it would involve a bit more criteria. Do you need to present digital renders of the work you ...

    Which CAD software is best for furniture designing and visualizing?
    A message posted at WOODWEB's CAD Forum (9/24) -- Hello Friends, I am new in furniture designing. There are many design software available, for ex. S ...

    Re: Making trim in a non-millwork shop....
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Shapers are nice and they have their uses. I have a router bit that I use to make this sa ...

    Re: Slash cut abrasive rolls
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- Dave Edgerton: Try these guys. Bring up the link and scroll to page 54. I thi ...

    Re: up and down play on undermount slides
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Hey Mark B, I think we're about due for the next evolution of cabinet drawer slides. This ...

    Re: Making trim in a non-millwork shop....
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- We run this profile on the WH with 2 passes. I had the shop that ground the knives put a ...

    Re: Making trim in a non-millwork shop....
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- True enough Leo but with carefull setup It's easily done. I have never had problems cutti ...

    Re: up and down play on undermount slides
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Darn Tough Crowd! I just asked: how much, if any, is normal? Did not really expect none. ...

    Re: Making trim in a non-millwork shop....
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Problem with a shaper is it is thickness sensitive because it is top referenced. A molder ...

    Re: Though Bore with Bradpoints?
    A message posted at WOODWEB's CNC Forum (9/24) -- We do. .038 over bottom of the material leaves a tiny center spot and round score from the knickers ...

    Re: Though Bore with Bradpoints?
    A message posted at WOODWEB's CNC Forum (9/24) -- You only need thru bits if you own a pod and rail machine or if you need to drill holes that are ri ...

    Re: up and down play on undermount slides
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Yes, it retracts softly into the cabinet. This is our same pocket door that we have had f ...

    Re: Filler / putty under Clawlock
    A message posted at WOODWEB's Finishing Forum (9/24) -- The way i fixed my problems with clawlock was to stop using it entirely. I used their WVP for ...

    Re: Slash cut abrasive rolls
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- Klingspor used to have those in a catalog - how to order, how to use, etc. If ...

    Re: up and down play on undermount slides
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Dennis - so, this Salice pocket door mechanism will self/soft retract when the door is pu ...

    Re: Filler / putty under Clawlock
    A message posted at WOODWEB's Finishing Forum (9/24) -- I've been using a putty by Timbermate It's water based and dries fast and hard Sands very nic ...

    Re: Vacuum pump overload(Omnitech)
    A message posted at WOODWEB's CNC Forum (9/24) -- Check the switches. Ours have amperage dials. One was not set correctly when new. It can cause what ...

    Re: up and down play on undermount slides
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- MagLev drawer slides. You heard it hear first. John ...

    Though Bore with Bradpoints?
    A message posted at WOODWEB's CNC Forum (9/24) -- Anyone (or everyone) through boring melamine with bradpoints? Rover A flatbed. ...

    Re: Though Bore with Bradpoints?
    A message posted at WOODWEB's CNC Forum (9/24) -- All the time as long as the spoilboard is in good shape. ...

    Re: Though Bore with Bradpoints?
    A message posted at WOODWEB's CNC Forum (9/24) -- What feed speed at 6000 rpm are you using? ...

    Re: Though Bore with Bradpoints?
    A message posted at WOODWEB's CNC Forum (9/24) -- 50 to 100 ipm depending on the diameter. ...

    Re: Veneer hot press clean
    A message posted at WOODWEB's Veneer Forum (9/24) -- Vinegar will dissolve the dried glue. ...

    Re: RE: Old Wood Veneer
    A message posted at WOODWEB's Veneer Forum (9/24) -- A better way to get the image.... ...

    Re: Onload/Offload
    A message posted at WOODWEB's CNC Forum (9/24) -- Rob, you bring up a really good point about table cleaning as the offloading is occurring. I do not ...

    What vacuum pump would you recommend?
    A message posted at WOODWEB's CNC Forum (9/24) -- We've got a Thermwood CS45 with 5x10 bed. It came with a Busch 15HP pump rated at 330CFM and 29&quo ...

    Re: Home made door clamp
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Built my own clamp last winter. Its similar to a ritter but has a few other options that ...

    Re: Home made door clamp
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- I should also say I do pin all my doors/drawer fronts with 5/8" 18g brads. My gable ...

    Re: pressure problem
    A message posted at WOODWEB's Finishing Forum (9/24) -- i believe you have an internal issue inside your regulator, inside the regulator there is a d ...

    Re: What vacuum pump would you recommend?
    A message posted at WOODWEB's CNC Forum (9/24) -- Paul, We run Busch vacuum pumps for our Homag CNC. It is approximately the same age as yours is. Ho ...

    Re: Home made door clamp
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- having been lucky enough to stay out of the field except to install my entry doors , i ha ...

    Re: Home made door clamp
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Doug - Interesting you should mention that millwork should not include metal. I heard thi ...

    Re: mdf finishing
    A message posted at WOODWEB's Finishing Forum (9/24) -- Got it! So you are cutting into center of doors to get the look of Shaker style And of course ...

    Re: Onload/Offload
    A message posted at WOODWEB's CNC Forum (9/24) -- The auto load on my machine cleans the table very well until the spoilboard get down and gets a gap ...

    Re: What vacuum pump would you recommend?
    A message posted at WOODWEB's CNC Forum (9/24) -- With vacuum you have to understand at what level of vacuum you have at 330 cfm. You need to see the ...

    Re: Repairing large pocket doors
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- They have been a very good customer over the years so my rule is when they gi ...

    Re: Installing up to a stacked stone fireplace
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/24) -- Mark B, You are definitely in the minority on this. 26+ years of resi ...

    Re: how do you vacuum Vaneer with no bag
    A message posted at WOODWEB's Veneer Forum (9/24) -- I would skip the vacuum all together for a table, use a sheet of melamine slightly bigger than y ...

    Re: Keeping the doors open
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/24) -- I have done several of these, and the doors staying open - and closed ...

    Re: WB stain for oak - white wood pore
    A message posted at WOODWEB's Finishing Forum (9/24) -- all you need to do is decrease the surface tension of your WB stain.A little bit of detergent ...

    Re: mdf finishing
    A message posted at WOODWEB's Finishing Forum (9/24) -- To msatercabman yes to finish the mdf to look like the stile and rails before the center pane ...

    Re: mdf finishing
    A message posted at WOODWEB's Finishing Forum (9/24) -- If your makeing a mdf 1 piece shaker style door how to get the finish to look like the rails ...

    Re: Klever 1224 Biesse Service
    A message posted at WOODWEB's CNC Forum (9/24) -- Not a Biesse, but we struggled with a Stiles tech for over a year. Many errors and 3 tech visits, n ...

    Biesse Works
    A message posted at WOODWEB's CNC Forum (9/24) -- We can access our CNC computer remotely using Outlook 365. Our problem is we can't run the CNC at t ...

    Re: Shop vac to clean shop
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Perhaps its time to sell your car and buy a Festool vac. You can tell the inspector its m ...

    Re: Onload/Offload
    A message posted at WOODWEB's CNC Forum (9/24) -- Derrek, what kind of machine do you have? Do you pre-make your material stacks for each job with th ...

    Re: WoodCad Cam/imos Help
    A message posted at WOODWEB's CAD Forum (9/24) -- yeah im not too familiar with the split edge function. I've attached a picture of what im trying to ...

    accu-systems hvpp
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- looking for wiring diagram for accu-system hvpp dowel inserter year 2000 serial # 069- 00 ...

    Re: Biesse Works
    A message posted at WOODWEB's CNC Forum (9/24) -- Yes. We prep files with the office copy and load with a memory stick. It was not highly recommended ...

    Re: Lacquer Thinner
    A message posted at WOODWEB's Finishing Forum (9/24) -- I do 20% with Resistant and I'd like to go less but my formula seems to work. 15% with the Cl ...

    Re: Lacquer Thinner
    A message posted at WOODWEB's Finishing Forum (9/24) -- Wow, why so much thinner? With Clawlock primer I'm using on 15%. I suppose it'll provide for ...

    Re: Water based Retarders
    A message posted at WOODWEB's Finishing Forum (9/24) -- First of all Butyl Cellosolve is to be used in solvent based systems only. You need Butyl Car ...

    Re: mdf finishing
    A message posted at WOODWEB's Finishing Forum (9/24) -- ok got it . Stupid question what kind of glue you guys use to stick the 2 pieces together. an ...

    Re: Lacquer Thinner
    A message posted at WOODWEB's Finishing Forum (9/24) -- All AAA's here Leo, A few HVLP for Stain application, 20% works good for us, I know some guys ...

    Re: Shaper questions for doors
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- I run an aux screw on 3/4" thick fence. With both sides installed I get 20.25" ...

    Re: Removing Blue Tape Residue
    A message posted at WOODWEB's Finishing Forum (9/24) -- In addition to the above, don't buff the residue too vigorously as you may end up with shiny ...

    Re: mdf finishing
    A message posted at WOODWEB's Finishing Forum (9/24) -- We do the same as mastercabman but instead of filling the seam on the edges we edgeband them. ...

    Re: Shaper questions for doors
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Nice sled. What provision do you have for preventing chip out? ...

    Re: Lacquer Thinner
    A message posted at WOODWEB's Finishing Forum (9/24) -- 2 coats of primer and 2 coats of resistant. tinted primer for dark colors. ...

    Re: Lacquer Thinner
    A message posted at WOODWEB's Finishing Forum (9/24) -- Thinner is much cheaper by 5 gal sizes at a auto paint store. ...

    Re: Tooling care
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Easy-off oven cleaner. Let it soak for a few minutes. ...

    Re: how do you vacuum Vaneer with no bag
    A message posted at WOODWEB's Veneer Forum (9/24) -- Does epoxy stick to Formica? ...

    Re: Vapor proof LED lights
    A message posted at WOODWEB's Finishing Forum (9/24) -- Thanks for the replies . ...

    Re: WoodCad Cam/imos Help
    A message posted at WOODWEB's CAD Forum (9/24) -- alright ill give that a try, thanks. ...

    Re: Staining Knotty pine to match a 50 year old home
    A message posted at WOODWEB's Finishing Forum (9/24) -- When I have used dyes, I have always found it best to mix the dye with water. We either mist ...

    Re: Staining Knotty pine to match a 50 year old home
    A message posted at WOODWEB's Finishing Forum (9/24) -- Thanks alot for all the feedback. Im not to f. amiliar with dye stains. Very interesting stai ...

    Re: Balanced tooling in insert planer heads
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- Thank you Russ & Adam both. Would like to ask a couple of more questions: You ...

    Re: Aldi Grocery Store: Benefits of standardization
    A message posted at WOODWEB's Business and Management Forum (9/24) -- I read another article yesterday in the WSJ. This one was about some of the cha ...

    Re: Balanced tooling in insert planer heads
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- This thread should be kicked over to the solid wood machining forum for an educate ...

    Re: Balanced tooling in insert planer heads
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- Cab Maker It is the wood chip that creates enough air flow that actually keeps the ...

    Re: What’s the deal with the deep refrigerators these days?
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- I agree with Leo we do the same thing allowing only the door to protrude pass the panel. ...

    Re: What’s the deal with the deep refrigerators these days?
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- I agree that only the doors need to stick out past the front of the cabinet. But don’t yo ...

    Re: Staining Knotty pine to match a 50 year old home
    A message posted at WOODWEB's Finishing Forum (9/24) -- I use the Lockwood waterbased dyes both as a standalobe stain and as an undertone like Paul s ...

    Re: What’s the deal with the deep refrigerators these days?
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- For me, that would be a situation where a plane change in the cabinets to accommodate tha ...

    Re: squaring door panels
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- We rip to width, then cross cut with either a sled, or just the t-square. I don't feel pa ...

    Re: Balanced tooling in insert planer heads
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- I have two more questions: Am I right in my understanding that a deeper bit into t ...

    Re: squaring door panels
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- I use our vertical panel saw on these all the time but keep the minimum size to 10" ...

    Re: Blum Base Plates
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- you need a thicker plate to move the door over 1/4'', use the plate # 175H9160. Same hing ...

    Re: Ripping 36 Degree Mitre
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- I'm guessing that you could pre-cut the miter at 45 degrees so when you run it at the fin ...

    Re: spraying white
    A message posted at WOODWEB's Finishing Forum (9/24) -- I think you’ll like it nicko, they say it doesn’t need thinned to spray but I use their reduc ...

    Re: Ripping 36 Degree Mitre
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- It takes no longer to do a safe setup than what you show, so why not? Just clamp the auxi ...

    Re: Sandpaper dimension for floor sander
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- I got one with no paper, also. Try measuring the distance around the drum and ...

    Re: Balanced tooling in insert planer heads
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- Thanks Russ. That really helped a lot. Makes great sense. ...

    Re: What’s the deal with the deep refrigerators these days?
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- This is what I’m talking about. ...

    Re: Ripping 36 Degree Mitre
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- That's a good idea Kevin. I hadn't thought of that. ...

    Re: How Can This Be?
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- I believe lumber core ply is all end grain besides the faces. Much like end g ...

    Re: Re - painting over Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (9/24) -- Problems with intercoat adhesion? One cause might be an insufficient scuff giving your friend ...

    Re: Cabnetware Replacement
    A message posted at WOODWEB's CAD Forum (9/24) -- I would be careful going with CV, actually anything that Roger T is involved in. When he ran CV he ...

    Re: How Can This Be?
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- Re: CLT prices. While the price for CLTs first appears to be exorbitant, when ...

    Re: Pigmented CV touch up
    A message posted at WOODWEB's Finishing Forum (9/24) -- If you think that your spot repair or spray-over is going to wrinkle anound the edges of the ...

    Re: Time Per 3/4 ply sheet on CNC
    A message posted at WOODWEB's CNC Forum (9/24) -- I got so sick of losing parts or banana parts for the speed we are running I started to run return ...

    Eastern Red Cedar Closet Residue
    A message posted at WOODWEB's WOODnetWORK Forum (9/24) -- I installed unfinished Eastern Red Cedar T&G closet paneling and the homeowner says the ...

    Re: Vinyl Sealer Pricing
    A message posted at WOODWEB's Finishing Forum (9/24) -- I do not think that your retailer has given you contractor's pricing. You are paying way, way ...

    Edge gluing Purple Heart & Gonçalo Alves/tiger wood
    A message posted at WOODWEB's Adhesives Forum (9/24) -- Has anyone had any issues edge gluing exotic lumber like Purple Heart and Gonçalo Alves/tiger ...

    Re: Blum aventos bi fold doors for upper cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- We use Hafele's "Free Fold" for this application as we prefer it over the Avent ...

    Re: 8/4 rift white oak
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- If Frank Miller Lumber doesn't work out for you, you can try Cole Hardwood in ...

    Re: How Can This Be?
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- Remember the old Lumber Core plywood we used to get ? It for the most part he ...

    Re: self edge primer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/24) -- I just spray the back of the laminate with Contact Adhesive. Works great ...

    Re: Ivory T-Molding?
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Thanks, will try both of those. ...

    Re: 8/4 rift white oak
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- Thank you David. ...

    Re: Ivory T-Molding?
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- outwater plastics ...

    Re: cabinet modification
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- You should be able to get the doors apart by drilling holes in the ends of the stiles and ...

    Re: Production cutting drawer box lengths
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- As a wholesaler, I would think you would only make so many different sizes of drawers. Wo ...

    Re: Pay parity with other trades?
    A message posted at WOODWEB's Business and Management Forum (9/24) -- It seems like the pay scales you are pointing to may be union rates. If you are ...

    Re: Pay parity with other trades?
    A message posted at WOODWEB's Business and Management Forum (9/24) -- Chris - You just need to focus a bit. Yes, generally the field is low paying, b ...

    Re: Pay parity with other trades?
    A message posted at WOODWEB's Business and Management Forum (9/24) -- DEFINITION OF 'SAY'S LAW OF MARKETS' An economic rule that says that production ...

    NYle Kiln L200
    A message posted at WOODWEB's Sawing and Drying Forum (9/24) -- Hi I am new to wood drying and wanted to know if anyone has run into this problem I r ...

    Re: Pay parity with other trades?
    A message posted at WOODWEB's Business and Management Forum (9/24) -- Chris, Sounds to me like you're gonna wear this viewpoint on your sleeve. Try t ...

    Re: 0ak cabinet refinishing job
    A message posted at WOODWEB's Finishing Forum (9/24) -- I use Murphy's Oil Soap after MS or Naptha only if there is still dirt that the MS/Naptha did ...

    Re: cabinet modification
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Ive cut down/modified a lot of doors. As long as you are cutting off more than the width ...

    Solar Kiln Interior Paint
    A message posted at WOODWEB's Sawing and Drying Forum (9/24) -- My solar kiln is coming along well, but I've had trouble finding the right product fo ...

    Re: 0ak cabinet refinishing job
    A message posted at WOODWEB's Finishing Forum (9/24) -- I would be very cautious about using Murphy's prior to any finishing. It does leave a residue ...

    flip up door hdw
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- I have a job coming up soon that will require an appliance garage under a standard wall c ...

    Re: quartersawn red oak treads and risers over old stairs
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- Traditionally, good practice on stair construction requires no screws. A few ...

    cabinet modification
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- I purchased a new Thermadore 30" double wall oven to replace our worn out unit, but ...

    Re: Production cutting drawer box lengths
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Bought used Striebig without scoring. Was satisfied with climb cutting to score, since yo ...

    Re: Production cutting drawer box lengths
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- After reading the responses and considering our other needs it looks like we are going to ...

    Re: laminate glue
    A message posted at WOODWEB's Adhesives Forum (9/24) -- I use Weldbond pva glue (Canadian) for all my high pressure laminating. There is a similar pr ...

    Re: quartersawn red oak treads and risers over old stairs
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- Similarly to first response, 180 grt would be more appropriate to traffic use ...

    Re: quartersawn red oak treads and risers over old stairs
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- Thanks for the replies. I did research the sealer and it seemed to have no ba ...

    Re: Pay parity with other trades?
    A message posted at WOODWEB's Business and Management Forum (9/24) -- Bankers make more? Not really, tellers get like $15 if they are lucky. Loan rep ...

    Alphacam nesting issue
    A message posted at WOODWEB's CAD Forum (9/24) -- I'm trying to nest a bunch of random parts and the nester keeps putting some of my parts WITHIN oth ...

    RE: Wide Belt Sandpaper
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- We have a 37" wide belt sanding machine. We were wondering what company(s) pr ...

    Re: flip up door hdw
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Used the Blum (Aventos I believe) lift up door hardware. Very slick. There are 5 choices ...

    Re: NYle Kiln L200
    A message posted at WOODWEB's Sawing and Drying Forum (9/24) -- I am interested in getting a Nyle kiln, how old was the vents since you got them? If ...

    3form
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- Looking for 3form varia ecoresin mirage aquarius twirl.I need 2 pcs. 36" ...

    Re: cabinet modification
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Thanks, was hoping that might not be the case but I don't know how I could possibly take ...

    Re: cabinet modification
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Very Cool! Thank you John, I'm going to give it a whirl, gotta figure out the clamping si ...

    Re: quartersawn red oak treads and risers over old stairs
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- P.S. twelve screws per tread will invite splitting, re-examine pocket screws ...

    Re: cabinet modification
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Unless you have cutters to match that panel and outside edge profile, I'd say you'll have ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (9/24) -- Told you I'd report back. Yes I did ask and yes I did get. Thanks for helping m ...

    Re: quartersawn red oak treads and risers over old stairs
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- Oak moves a lot. Does not sound like a good idea to glue directly to pine. ...

    Re: 3form
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- I have lots of odds and ends of other products, mostly textures an maybe a ru ...

    Re: Shop Poll: What Size Is Your Shop?
    A message posted at WOODWEB's Value Added Wood Processing Forum (9/24) -- I have voted for "Less than 3,000 sq ft" ...

    Re: Production cutting drawer box lengths
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- Thanks Rich... and to all who replied. ...

    Re: electro-magnetic touch latch type doors
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- take a look at these products... ...

    Re: NYle Kiln L200
    A message posted at WOODWEB's Sawing and Drying Forum (9/24) -- The vent kit is brand new. I've only had them for 3 weeks ...

    Re: Steaming/stickering questions
    A message posted at WOODWEB's Sawing and Drying Forum (9/24) -- Why must the lumber be tight-stacked for steaming? Is it because stickers will discol ...

    slide saws
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- looking at a couple large sliders. All used except the SCM nova 400 on sale curren ...

    Re: spray adhesives containing methyl chloride - standard precautions?
    A message posted at WOODWEB's Adhesives Forum (9/24) -- Gavin, If you look at the Threshold Limit Value published by the ACGIH it indicates that any ...

    Re: breaking bandmill blades
    A message posted at WOODWEB's Sawing and Drying Forum (9/24) -- I agree with Steve. Are they breaking at the weld--bad blades then? If not, then the ...

    Re: Weinig Molder
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- I use a couple of options for motors. Non-brake motors I get new from motor shops. ...

    Door Manufacturing? Wide Belt sander?
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24) -- We build engineered solid core interior doors. All species of woods and a lot ...

    Re: slide saws
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- I believe the WA is Altendorfs saw that is made in China.Anymore,you really have t ...

    Re: spray adhesives containing methyl chloride - standard precautions?
    A message posted at WOODWEB's Adhesives Forum (9/24) -- Gavin, You should consult the MSDS for the product. Your employer is required to have this on ...

    Straight lining on gang rip saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- We do a mix of random width ripping to glue up solid wood panels and standardized ...

    Re: Weinig
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- There are a couple of options. You can check with you machinery agent to see if th ...

    breaking bandmill blades
    A message posted at WOODWEB's Sawing and Drying Forum (9/24) -- I've had a Norwood sawmill since 2005 and have been using it not fulltime but regular ...

    Re: Wood Glide lubricant
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- Scott, If I understand what you are looking for is a lub that will stay on the woo ...

    Re: Senco nailer
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/24) -- I've owned and used Senco for years, but no more. They have taken the ...

    Re: Senco nailer
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/24) -- I guess I just really liked the idea of using 23 gauge on my reface j ...

    Re: slide saws
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- The Altendorf WA8 are made in Germany and assembled in China. I assume for savings ...

    Re: breaking bandmill blades
    A message posted at WOODWEB's Sawing and Drying Forum (9/24) -- The 2 biggest blade breakers are worn v belts where the blade hits the wheel and have ...

    Re: Morbidelli CNC Nested base router - Buy or not Buy?
    A message posted at WOODWEB's CNC Forum (9/24) -- I have a Scmi routech 5 axis. Scm owned and manufactures mordibelli. I am satisfied enough that I j ...

    Titebond 1 vs 2 vs 3
    A message posted at WOODWEB's Adhesives Forum (9/24) -- Titebond 1: indoor Titebond 2: water resistant Titebond 3: water proof What is a reason for u ...

    Re: moulder parts
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- What size are you needing? I might some used ones Dave Rankin ...

    Re: 2 pc MDF doors in Cabinet Vision
    A message posted at WOODWEB's CAD Forum (9/24) -- Is any software recommendations for 2 pc MDF doors ? ...

    Re: Professionalism
    A message posted at WOODWEB's Furniture Making Forum (9/24) -- Established: 1. The weekend-warrior-router-man-with-a-two-car-garage-and-a-wife-with-a ...

    conference table questions
    A message posted at WOODWEB's Veneer Forum (9/24) -- I have a conference table job coming up and I'd like some feedback to validate or redirect my pl ...

    Re: conference table questions
    A message posted at WOODWEB's Veneer Forum (9/24) -- one additional question - are there any advantages to using a wood-on-wood backed veneer vs. a 1 ...

    Re: miter saw stand
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/24) -- I have a stand made by DeWalt, but I have never been particularly fon ...

    Re: Closing up shop
    A message posted at WOODWEB's Finishing Forum (8/24/25) -- Nick I want to say I'm glad to see you are still working at 70, and plan to continue. I ca ...

    Re: Current millwork market
    A message posted at WOODWEB's Business and Management Forum (8/24/25) -- South East Minnesota. Cabinet shop. I've never been this busy. Never had thi ...

    Re: Not sure which brand of CNC to buy?
    A message posted at WOODWEB's CNC Forum (8/24/24) -- Sauk Rapids Komo was an absolutely amazing facility. More importantly they built absolute tanks ...

    Re: Not sure which brand of CNC to buy?
    A message posted at WOODWEB's CNC Forum (8/24/24) -- I have owned holzher, multicam, 2 komos, and just purchased a brand new cro router. Was very exc ...

    Re: Not sure which brand of CNC to buy?
    A message posted at WOODWEB's CNC Forum (8/24/24) -- Z, I feel your pain. Almost bought a Komo back in 2002. Thats when the wheels started falling of ...

    Re: Has anyone used the small part holding tape?
    A message posted at WOODWEB's CNC Forum (8/24/24) -- We have used 2 sided tape when necessary. We have it in the shop for attaching drawer fronts bef ...

    Re: Long pocket doors
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/24) -- We’re doing a job now that I’m about to order Blums Revego pocket door system, I’m a b ...

    Re: Has anyone used the small part holding tape?
    A message posted at WOODWEB's CNC Forum (8/24/24) -- Are you using vacuum hold down and this is to be added as added holding power? What machine? Wha ...

    Re: Weird moulder/dust collection SAFETY question
    A message posted at WOODWEB's Solid Wood Machining Forum (8/24/24) -- Only thing I can think about with this one is if you drop a part/bolt or someth ...

    Re: Has anyone used the small part holding tape?
    A message posted at WOODWEB's CNC Forum (8/24/24) -- I'm looking for labels for parts coming out of the cnc that will not fall of easy but will be re ...

    Re: Has anyone used the small part holding tape?
    A message posted at WOODWEB's CNC Forum (8/24/24) -- Dror That’s a million dollar question!! My install teams hate any labels that actually hold up t ...

    Labels on cut parts of the cnc
    A message posted at WOODWEB's CNC Forum (8/24/24) -- I'm looking for labels that do not fall from the panel but are easy to peel of. Any information ...

    Has anyone used the small part holding tape?
    A message posted at WOODWEB's CNC Forum (8/24/24) -- Title says it all. BH Davis ...

    Re: Gloss versus Satin
    A message posted at WOODWEB's Finishing Forum (8/24/23) -- Thanks for the recommendations to look into other products. I certainly agree there are be ...

    Re: Gloss versus Satin
    A message posted at WOODWEB's Finishing Forum (8/24/23) -- The only time I've ever heard of people doing the gloss build coats and a satin/semi final ...

    Undermount slides with roller mechanism that attaches to back of box
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/24/23) -- I am looking for specific type of undermount extension drawer slid ...

    Re: Interior door construction question
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24/23) -- I've never known anyone that glues solid hardwood floors down. Why do they ...

    Re: Gloss versus Satin
    A message posted at WOODWEB's Finishing Forum (8/24/23) -- There is a world full of better professional products than Minwax. I wouldn't know where t ...

    Re: Gloss versus Satin
    A message posted at WOODWEB's Finishing Forum (8/24/23) -- Another vote against Minwax. I only use water based 2K's tinted as well as clears, and the ...

    Re: AC/Dehumidifier in home sprays with Milesi
    A message posted at WOODWEB's Finishing Forum (8/24/23) -- Bob N Curious as to your front / back drying schedule for cabinet doors? With solvent CV. ...

    Re: Corian
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/24/23) -- We have in the past donated our excess to the local union apprentices ...

    Re: Interior door construction question
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24/23) -- The argument they make is that solid hardwood floor is routinely glued to ...

    Re: Automotive clear coat polyurethane heat resistance
    A message posted at WOODWEB's Finishing Forum (8/24/23) -- Michael Folan Are you spraying that floor finish? If so how do you reduce it? Thanks ...

    Re: Graining Markers
    A message posted at WOODWEB's Finishing Forum (8/24/23) -- Rich C Whare do you find this faux training? Sounds great! I live in rural Oregon so I exp ...

    Re: Interior door construction question
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24/23) -- Absolutely, never glue 1/2" solid wood to plywood. ...

    Re: Corian
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/24/23) -- We often thought of shower stall walls. Mosaic patterns ...

    Re: 2k poly
    A message posted at WOODWEB's Finishing Forum (8/24/23) -- Are you scuffing it the same day as you spray it? ...

    Re: Project managament software
    A message posted at WOODWEB's Business and Management Forum (8/24/22) -- Things with Trello didn't go well. Major problem is that tasks do not have t ...

    Re: Two-phase and three-phase motors in a machine, what are they?
    A message posted at WOODWEB's CNC Forum (8/24/22) -- Two-phase motors are inferior to three-phase motors in pitch accuracy, but this can be compensat ...

    Re: Achilles Tear
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/22) -- Haven't had that injury. Looks like 6-12 months for recovery. I tore my bicept muscle ...

    Achilles Tear
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/22) -- Last weekend I tore Achilles Tenden. I am a one man shop, traditional equipment. Slide ...

    Re: Honing backs of corrugated shaper knives
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24/22) -- Shouldn't be a safety problem lapping the backs a little bit, but you shou ...

    Re: Spray Paint High heat white on wood countertop?
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/22) -- why not get some ceramic coasters? ...

    Re: Two-phase and three-phase motors in a machine, what are they?
    A message posted at WOODWEB's CNC Forum (8/24/22) -- Thanks for the feedback! ...

    Re: curved doors and drawer fronts
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24/21) -- I'm with BH as well, as for veneering. Well since you have to use local wo ...

    Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- Homeowner here nearing the end of a kitchen remodel. Of the many issues we’ve identifi ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- Just like Jim and others have stated.... The install looks great. Clean lines, all the ...

    Building Shutters / Cutting Louvers
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24/21) -- We are an Architectural Millwork Co. building wood windows & doors. A ...

    Re: Oversized Exterior 1 Lite Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24/21) -- The issue they have is competing requirements within the design. The lady ...

    Re: Oversized Exterior 1 Lite Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24/21) -- I have never regretted walking away from marginal work. There are enough p ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- thanks all for responses. Just as an FYI, we intend to pay this person, we're not look ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- Looks like the drawers were pre drilled during fabrication and then because of shaker ...

    NEED Grass Zargen full extensions piece
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- I designed a cool cabinet for a very tight space around a grass Zargen drawer guide wi ...

    Re: curved doors and drawer fronts
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24/21) -- Thanks BH I would have to make the veneer and this is something that I hav ...

    Re: Mirror shine high build
    A message posted at WOODWEB's Finishing Forum (8/24/21) -- I use to do a lot of high gloss finish in aircraft using polyester .There no easy short cu ...

    Re: spray booth questions
    A message posted at WOODWEB's Finishing Forum (8/24/21) -- Make do with what you got until you make it is a reasonable thing to do in business overal ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- Adding some other overall kitchen pics. As you can see, we're not looking for bargain ...

    Re: Building Shutters / Cutting Louvers
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24/21) -- You need a straight-line rip saw, and a minimum of a 4 head moulder. Both ...

    Re: curved kitchen curved doors
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- You lost me at "use a router on a trammel a lot like a lathe." I'm not sure ...

    Re: curved kitchen curved doors
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- You will be glueing up a segmented shape. Think octagon Knock off the hi spot with a h ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- What you are picking out in no way effects the functionality or look of the kitchen. I ...

    Re: Replacement feed roller for 26” woodmaster drum sander
    A message posted at WOODWEB's WOODnetWORK Forum (8/24/21) -- I don't know who can do it but there are places that recover rollers. ...

    Re: Oversized Exterior 1 Lite Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24/21) -- I have a picture in my mind of what this house looks like and it ain't pre ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- more images... ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- more images ...

    Re: spray booth questions
    A message posted at WOODWEB's Finishing Forum (8/24/21) -- Correct. will pack it up. call it a day. lights out. ...

    Re: curved kitchen curved doors
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- You could sub the doors out ...

    Re: And its about to get much worse
    A message posted at WOODWEB's Business and Management Forum (8/24) -- I’m astounded that small business owners look at a chart from one of the big si ...

    Re: And its about to get much worse
    A message posted at WOODWEB's Business and Management Forum (8/24) -- "Where does this leave us? It’s undeniably true that housing, health care, ...

    Re: And its about to get much worse
    A message posted at WOODWEB's Business and Management Forum (8/24) -- 1) this report was done pre-covid and the comments below are from Febuary Its t ...

    Re: And its about to get much worse
    A message posted at WOODWEB's Business and Management Forum (8/24) -- Dire warnings from FM and others, with no supporting info, only muddy the water ...

    Re: Oak/MDF veneer panel Mold appears in finishing
    A message posted at WOODWEB's Finishing Forum (8/24) -- lol..... Maybe I was a little overzealous... Yeah maybe there would be more graying effect if ...

    Re: unintentional bleaching
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Depends on how long the bleach sat on the wood, but wouldn't be surprised that at least 1 ...

    Handheld stitcher advice
    A message posted at WOODWEB's Veneer Forum (8/24) -- Alright, we are finally facing up to the fact that using the 10 mil paperbacked sheets are not c ...

    Re: Handheld stitcher advice
    A message posted at WOODWEB's Veneer Forum (8/24) -- The hand held stitcher sold by Vacuum Systems is a Kuper (?) and works very well. I think Daryl ...

    Re: boss 5 x 12 cnc router
    A message posted at WOODWEB's CNC Forum (8/24) -- BOSS CNC Routers are manufactured in Terrell, Tx. We build an industrial machine with 100% steel ga ...

    Re: Handheld stitcher advice
    A message posted at WOODWEB's Veneer Forum (8/24) -- If you are looking at the Kuper hand held zigzag the unit you want for splicing is the HFZ-4. Th ...

    unintentional bleaching
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- we built a sapele mahogany top for a customer about a year ago. they called last week and ...

    Re: Epic Corian Failure
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/24) -- Just took the Corian Certification class a few weeks ago. Far from an ex ...

    Re: Handheld stitcher advice
    A message posted at WOODWEB's Veneer Forum (8/24) -- Thanks David. Do you mean VacuPress or Veneer Sytems? The Vacupress one looks a lot like the Kup ...

    Re: casement window weatherstip
    A message posted at WOODWEB's Adhesives Forum (8/24) -- Hi Mike, would you say the newer EPDM or TPE type gasket may do? 3/16" would be a tight ...

    Re: Handheld stitcher advice
    A message posted at WOODWEB's Veneer Forum (8/24) -- Thanks John. I was hoping you'd respond. Can you tell me about the "gold" machine you' ...

    Re: unintentional bleaching
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Sounds like an expensive mistake other than grinding it down in-place and staining/re-app ...

    Re: Fire and Theft Insurance
    A message posted at WOODWEB's Business and Management Forum (8/24) -- The most important thing about fire insurance is choosing a company that won't ...

    Re: Egg & Dart molding source
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Pretty sure you can get a simple egg and dart, but not in the molding. Get a custom moldi ...

    Egg & Dart molding source
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- I'm doing a historical restoration project and am looking for an Egg & Dart molding s ...

    Holz-Her Re-Tool Tour 2020
    A message posted at WOODWEB's CNC Forum (8/24) -- Join us for the upcoming retool tour!!! Link to all the information you will need to participate. h ...

    Re: unintentional bleaching
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- P.S., you cant help but to wonder how many bleach mishaps have happened during Covid. ...

    Re: And its about to get much worse
    A message posted at WOODWEB's Business and Management Forum (8/24) -- FM Is QAnon the source of this thinking? ...

    Re: SCM Accord 25fx won't turn on
    A message posted at WOODWEB's CNC Forum (8/24) -- https://www.woodweb.com/cgi-bin/forums/cnc.pl?read 835805 ...

    Re: Small/Open End Wide Belt Sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Jeff: When I had my business, I bought a Bridgewood open end wide belt sander. I left the ...

    Re: chairs
    A message posted at WOODWEB's Furniture Making Forum (8/24) -- Ben: I find it interesting that you require a custom height for table and chair, as yo ...

    Re: pullout hinges
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Alan, I did not try the miter door bore. I built out for the slide like normal. Like some ...

    Re: pullout hinges
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Alan, I thought that was the answer when I first talked with Blum. Problem is that is a h ...

    Re: pullout hinges
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Thomas, The last page middle left shows inset with what looks like 19MM base plate, is th ...

    Re: chairs
    A message posted at WOODWEB's Furniture Making Forum (8/24) -- Chairs are normally 18" high in the front, 17 3/4" in the back, dining table ...

    Re: Tree Removal
    A message posted at WOODWEB's Forestry Forum (8/24) -- Box elder is a maple. I think it burns as well as any soft maple, probably better than silver ...

    Re: Shop layout help
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Dust collector and air compressor are in the storage room. ...

    Re: Selling to design/install shops
    A message posted at WOODWEB's Business and Management Forum (8/24) -- Meanwhile the overhead never sleeps ...

    Re: chairs
    A message posted at WOODWEB's Furniture Making Forum (8/24) -- I meant 17 1/4" in the back. It's been a long day. ...

    Re: Pocket door hardware disaster
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- The cabinet maker used a roller track system. These systems did not work. They slipped an ...

    Re: Push off & clean effectiveness?
    A message posted at WOODWEB's CNC Forum (8/24) -- I have a Biesse RoverS. Auto load and unload. The sweep arm cleans very.well and we have no need to ...

    Re: Frameless with 1/8'' reveals
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Bret I have used them(HR) for 2-3 years for some things, dovetail prefinished boxes, crow ...

    Re: spoil board
    A message posted at WOODWEB's CNC Forum (8/24) -- @Rich about axis yes you corect we usualy use the europain style ,that mean long axis is X about pa ...

    Re: smoke causing fisheyes?
    A message posted at WOODWEB's Finishing Forum (8/24) -- It depends on the nature of the smoke particles. If they are oily, it's easy to get fisheyes. ...

    Re: Delta table saw parts
    A message posted at WOODWEB's Solid Wood Machining Forum (8/24) -- Rich C Im not sure if you could do that or not. If you look there looks to be a sl ...

    Re: Laser cutter
    A message posted at WOODWEB's Business and Management Forum (8/24) -- The bottle is the Jayhawk Doc, University of Kansas School of Medicine. My budd ...

    Re: Use Of PreMill on Bander
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- We cut our doors net size - and set the premill to remove the thickness of the banding. S ...

    Re: Stain color matching systems for lacquer wiping stain
    A message posted at WOODWEB's Finishing Forum (8/24) -- What are the costs of the SW Aurora color matching systeam? ...

    Re: Frameless with 1/8'' reveals
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Sorry Bret, I should have addressed tha response to Collin. Jr ...

    Re: Frameless with 1/8'' reveals
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Anyone try hardware resources yet? ...

    Re: Laser cutter
    A message posted at WOODWEB's Business and Management Forum (8/24) -- here are some pics. ...

    Re: Laser cutter
    A message posted at WOODWEB's Business and Management Forum (8/24) -- a few more ...

    Re: Weinig Powermat
    A message posted at WOODWEB's Solid Wood Machining Forum (8/24) -- I could well be wrong, but I don't believe you can get a Powermat without NC contr ...

    How fine do we need to filter our air?
    A message posted at WOODWEB's Finishing Forum (8/24) -- We've been having a little trouble with what I believe is some oil getting into our spray roo ...

    Re: Storage charges
    A message posted at WOODWEB's Business and Management Forum (8/24) -- We have an agreement to pay storage charges built into our contract. It comes i ...

    Office to Shop employee ratio
    A message posted at WOODWEB's Business and Management Forum (8/24) -- I am curious what is the average number of shop employees to office employees f ...

    Re: s2m parts oversized off cnc
    A message posted at WOODWEB's CNC Forum (8/24) -- Could be a lot of things. Is it all parts, or just parts with edgebanding? Do the part sizes match ...

    Re: hvlp
    A message posted at WOODWEB's Finishing Forum (8/24) -- Chris makes a good point, sanding sealers are far easier to work with than any top coat. but ...

    Re: Ruh Roh
    A message posted at WOODWEB's Business and Management Forum (8/24) -- The problem with statistics is that you can drown in an average of 3 inches of ...

    Re: Definition of an Ellipse?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24) -- You also end-up with a cone which is no longer a cone but a funnel. In math o ...

    Re: Ruh Roh
    A message posted at WOODWEB's Business and Management Forum (8/24) -- David One of the articles is wrong. The age people buy their 1st house these da ...

    Re: Ruh Roh
    A message posted at WOODWEB's Business and Management Forum (8/24) -- "Either way I am stating very clearly that 2020 will be a banner year in h ...

    CMA Regional Event - Long Island & NYC
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- The CMA is hosting a regional event, starting on Long Island on Thursday, October 5, tour ...

    Re: Workers Comp
    A message posted at WOODWEB's Business and Management Forum (8/24) -- We decided to stay with Federated and did a littler digging. I have a 10k deduc ...

    Re: Loss of a good man Chuck Rankin
    A message posted at WOODWEB's Solid Wood Machining Forum (8/24) -- Chuck helped me repeatedly with tooling choices and shared so much knowledge with ...

    Re: s2m parts oversized off cnc
    A message posted at WOODWEB's CNC Forum (8/24) -- For the pieces coming out 1/16 oversized , have you used a set of calipers to gauge the true thickn ...

    Re: s2m parts oversized off cnc
    A message posted at WOODWEB's CNC Forum (8/24) -- The issue is in the length and width of the parts, we did mic the bit at 3/8 and its not a climb cu ...

    Re: Ruh Roh
    A message posted at WOODWEB's Business and Management Forum (8/24) -- Of course Tim e.g. makes the same prediction over and over, I'm surprised he wa ...

    Re: one or two ToolPath
    A message posted at WOODWEB's CNC Forum (8/24) -- "I'm a speed guy - 1100 IPM in melamine" That's moving...I've never been near that, excep ...

    KCD dovetail drawers
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Is anyone cutting the KCD dovetail drawers? How do you like it? Using prefinished or unfi ...

    Re: s2m parts oversized off cnc
    A message posted at WOODWEB's CNC Forum (8/24) -- When you say the parts are coming out 1/16 bigger did you check the true size of your bit and are y ...

    Re: one or two ToolPath
    A message posted at WOODWEB's CNC Forum (8/24) -- Interesting, Dropout, thanks for the info. Whose 3 flute 3/8" compression do you like? You're ...

    Re: one or two ToolPath
    A message posted at WOODWEB's CNC Forum (8/24) -- 3 flute 3/8 compression spiral. 16,000 RPM 1100 IPM full depth in 5/8 or 3/4 PB. Also, 3 flute roug ...

    Re: Ruh Roh
    A message posted at WOODWEB's Business and Management Forum (8/24) -- Not what I read the other day. http://www.businessinsider.com/millennials-are-k ...

    Re: New Unibond 800
    A message posted at WOODWEB's Adhesives Forum (8/24) -- Thanks everyone for your advise which I totally followed and the results were perfect. Thanks ...

    Re: ADHESIVE FOR BONDING LEAD SHEET TO WOOD
    A message posted at WOODWEB's Adhesives Forum (8/24) -- Hey Matt, We've used contact adhesive in the past. Cheers Marty ...

    Re: Office to Shop employee ratio
    A message posted at WOODWEB's Business and Management Forum (8/24) -- What's the problem? ...

    Re: Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24) -- Alan, Those are a lot of fundamental questions. I will try to answer a couple ...

    Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/24) -- Wood is more likely Khaya, but sold as mahogany. Anyway, trying to fill all grain prior to to ...

    Re: Finishing Sequence - Chalk Paint Kitchen Cabinets
    A message posted at WOODWEB's Finishing Forum (8/24) -- Couple points: the only Chalk Paint is Annie Sloan paint-it's trademarked and no other paint ...

    Re: Dehumidification air speed
    A message posted at WOODWEB's Sawing and Drying Forum (8/24) -- Do you have any guidelines for the weight of 1000 BF? If not, go to the right side of ...

    Lacqure finish cracking over paint
    A message posted at WOODWEB's Finishing Forum (8/24) -- we have been having issues recently at work with are finishing and I'm just trying to figure ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/24) -- if your not a commercial type producer polyester is not going to be easy for you to get but i ...

    Re: Employee Side Work
    A message posted at WOODWEB's Business and Management Forum (8/24) -- Chipbored- My employee started asking me questions about a specific job we had ...

    Re: Black Walnut Finishing
    A message posted at WOODWEB's Finishing Forum (8/24) -- I'm guessing Rich has not used Smith's CPES, it is a penetrating not a surface film forming s ...

    Re: sander dust extractor
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/24) -- In the under 300 range my guess is the best reviews your going to ...

    Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24) -- I plan to make a front entry door. Luckily, mine will be all glass with a 6&q ...

    Re: Lacqure finish cracking over paint
    A message posted at WOODWEB's Finishing Forum (8/24) -- You're doing yourself no favor with that last precat lacquer top coat. That stuff is not dura ...

    Re: Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (8/24) -- Actually a storm door can make the conditions worse. With southern exposure, ...

    Porter Cable Dovetail Omni Jig
    A message posted at WOODWEB's Furniture Making Forum (8/24) -- Is it possible to dovetail drawer parts with the omni jig that are NOT whole numbered ...

    Re: Lacqure finish cracking over paint
    A message posted at WOODWEB's Finishing Forum (8/24) -- Just I usually do not put clear on top of paint Unless I'm glazing Are you sure its the clear ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/24) -- Look into MLC Polarion. Put down 3-4 coats of the sealer at 6-8 mil, 45 minutes apart. Wait o ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/24) -- Small shop, one-off piece(s). I'm actually a cabinetmaker turned remodeling contractor. I've ...

    Re: how much would you pay?
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Don't know what the going rate is for a 12" machine these days, but that machine use ...

    Re: Implementing Top Solid
    A message posted at WOODWEB's CAD Forum (8/24) -- Thanks Mark, that's exactly the goal I have to work towards. In reviewing all the Top Solid Wood vi ...

    Re: Dehumidification air speed
    A message posted at WOODWEB's Sawing and Drying Forum (8/24) -- Where is the best position to vent some of the heat from my dh kiln. It is way too ho ...

    Re: Black Walnut Finishing
    A message posted at WOODWEB's Finishing Forum (8/24) -- EPOXY. Try this: http://www.jamestowndistributors.com/userportal/product.do?part 440091&e ...

    Re: Implementing Top Solid
    A message posted at WOODWEB's CAD Forum (8/24) -- Hi Tom. Keep an eye out on Topsolid's new learn site. Hopefully it will be a good resource to get i ...

    Making Wine rack cabinet in Cabinet vision
    A message posted at WOODWEB's CAD Forum (8/24) -- I have customer who wants me to make wine rack like it is showing on picture. Any idea how I can ma ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/24) -- In a production environment I believe there is no better method of filling open pore wood tha ...

    Re: Black Walnut Finishing
    A message posted at WOODWEB's Finishing Forum (8/24) -- Epoxy will make it look like a piece of plastic. I really hate it on the bark. Makes it look ...

    Re: Species id ?
    A message posted at WOODWEB's Sawing and Drying Forum (8/24) -- The wood is not Pacific Madrone. I have attached a photo of Madrone for comparison. I ...

    Re: how much would you pay?
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- After a good inspection with a quality straight edge, and it checked out, I'd pay up to $ ...

    Re: Cabinet designers...fact or fiction
    A message posted at WOODWEB's Business and Management Forum (8/24) -- Take a look at our website. May be you will find what you looking for. ...

    Re: Dehumidification air speed
    A message posted at WOODWEB's Sawing and Drying Forum (8/24) -- Use the weight data for hackberry wood, as it is comparable to camphor laurel. ...

    Re: Lacqure finish cracking over paint
    A message posted at WOODWEB's Finishing Forum (8/24) -- Also like to add Too thick of coating can crack If it doesn't dry right ...

    Re: Dehumidification air speed
    A message posted at WOODWEB's Sawing and Drying Forum (8/24) -- Unfortunately camphor Laurel is not in the list regards Stuart ...

    Re: Bizarre Marks around hadle holes
    A message posted at WOODWEB's Finishing Forum (8/24) -- Looks like I was right!!!! I'm the "master"!!!!!!! ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/24) -- Why aren't you using grain filler? Not wood filler, grain filler. ...

    Re: Species id ?
    A message posted at WOODWEB's Sawing and Drying Forum (8/24) -- It looks a lot like white fir to me lol ...

    Re: Species id ?
    A message posted at WOODWEB's Sawing and Drying Forum (8/24) -- Doug Fir can be heavy for a softwood... ...

    Re: Printed Material for Marketing
    A message posted at WOODWEB's Business and Management Forum (8/24) -- One of the advantages of printed material (for face to face meetings) is that y ...

    Re: Real TSP before re coating a front door
    A message posted at WOODWEB's Finishing Forum (8/24) -- First off what is currently on there and what shape is the current finish in? Has it failed o ...

    Re: Printed Material for Marketing
    A message posted at WOODWEB's Business and Management Forum (8/24) -- Just like Paul, my business is entirely internet based. It's a great way, but v ...

    Re: Real TSP before re coating a front door
    A message posted at WOODWEB's Finishing Forum (8/24) -- In defense of Helmsman spar varnish; I've used minwax helmsman spar varnish for years (40) an ...

    KD54 help
    A message posted at WOODWEB's Solid Wood Machining Forum (8/24) -- I need some help from KD54 users. Just got a used one from a source that took over ...

    Shopping for a spray booth
    A message posted at WOODWEB's Finishing Forum (8/24) -- I have recently expanded my shop and would like to move all of my finishing in house. I have ...

    Re: Aging White Oak
    A message posted at WOODWEB's Finishing Forum (8/24) -- Thank you for your responses!! They are very helpful. The original sample was created with a ...

    Re: Drawing Layouts On Floor - NEW CONSTRUCTION
    A message posted at WOODWEB's CAD Forum (8/24) -- there are in-between steps you can take. a place I used to be did the layout in cad, but always set ...

    Smallest Possible Gap Face Frame Hinge?
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- I have a client who wants to replace her kitchen doors and drawer fronts. The existing ca ...

    Re: Aging White Oak
    A message posted at WOODWEB's Finishing Forum (8/24) -- This doesn't answer your question, but might open another option. Look up 'shou sugi ban', in ...

    Re: Printed Material for Marketing
    A message posted at WOODWEB's Business and Management Forum (8/24) -- Why the need for printed material? I don't know if it's a need per say, but I g ...

    Re: supermax brush sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- My very small exposure to brush sanders, I wasn't very impressed. A shop I worked at had ...

    Re: Carbide alternative
    A message posted at WOODWEB's Solid Wood Machining Forum (8/24) -- Depending on your volume you may want to get a head made. We have a head we use to ...

    supermax brush sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Looking to buy a supermax brush sander for doors wondering if anyone uses one would like ...

    Re: What would you call a big gig?
    A message posted at WOODWEB's Business and Management Forum (8/24) -- 20% was the number used by the sports apparel company I used to work for for th ...

    Re: cabinet software shopping...
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Try Looking at Cabinet pro. I've used it for years, nice renderings, exact cutlists, door ...

    Re: Responsibility for Pre-finish Prep-sanding (unofficial poll)
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- I am not a finisher and don't play one on TV. I always make it clear that I will do my be ...

    Re: SPAX - Using Torx screws long term
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Mark, Thanks for the reply. Are the Spax you use Torx, square or other? do you use both b ...

    Re: Printed Material for Marketing
    A message posted at WOODWEB's Business and Management Forum (8/24) -- We recently hired a rep group to call on architects, and they keep telling me t ...

    Re: Printed Material for Marketing
    A message posted at WOODWEB's Business and Management Forum (8/24) -- I think direct mail is still valid to former customers. It is too easy for cust ...

    Re: cabinet software shopping...
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Come to Kansas and I'll be more than happy to give you a tour and I would love to see you ...

    Re: Responsibility for Pre-finish Prep-sanding (unofficial poll)
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Finishers should only have to do a light sanding to remove any marks from the handling of ...

    what do these fit
    A message posted at WOODWEB's Business and Management Forum (8/24) -- These came with a box of cutters purchased at an auction. I've never seen this ...

    Re: Heavy shelves
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- A 16d nail or a 3" installation screw certainly has hundreds of pounds of shear stre ...

    Re: Software to take orders, buy materials, track sales and expenses etc.
    A message posted at WOODWEB's Business and Management Forum (8/24) -- John, there's more than one reason you're thriving, believe me, but thank you! ...

    Re: Boring bits
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- I've got an R46 as well, I bought cmt bits through my carbide guy. I can't remember what ...

    Boring bits
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Looking to retool my line boring machine, it's a Ritter R46. 10mm shank x 5mm. Does anyon ...

    Re: HSK Lubricant
    A message posted at WOODWEB's CNC Forum (8/24) -- This is the recommended lubricant for my HSK 63F spindle taper. Reccomended to me by Atlanta Precis ...

    Re: Real TSP before re coating a front door
    A message posted at WOODWEB's Finishing Forum (8/24) -- I should've said you'll need to top the gloss Flagship varnish with the Interlux satin/flat ...

    Re: Pricing methods revealed
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- time for me to move average here is only 110 a foot for alder face frame finished and ins ...

    Re: Responsibility for Pre-finish Prep-sanding (unofficial poll)
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Completely agree with Richard . ...

    HSK Lubricant
    A message posted at WOODWEB's CNC Forum (8/24) -- What are you using for lubricant on an HSK spindle taper? ...

    Re: Boring bits
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- Vortex Tool ...

    Re: finishing massive redwood top on Kauai
    A message posted at WOODWEB's Furniture Making Forum (8/24) -- Hi Kim, In simple terms. Don't be intimidated by this project, you've got time, tackle ...

    Problem - upholstery rippled edge
    A message posted at WOODWEB's Furniture Making Forum (8/24) -- Hi all, I'm making a foam cushioned suede padding for a box. 1/4" ply backing, sp ...

    guide rollers flange
    A message posted at WOODWEB's Sawing and Drying Forum (8/24) -- After over 2 million bf I run the flange on the guide rollers 1/4 behind the blade as ...

    Re: WoodWop - DXF import
    A message posted at WOODWEB's CNC Forum (8/24) -- Casey, You have not specified the correct layer names in your DXF file. WoodWop does not know the s ...

    Re: guide rollers flange
    A message posted at WOODWEB's Sawing and Drying Forum (8/24) -- Sounds like alot of sharpening for one blade.I get around 500 to a 1000 feet before a ...

    Steel table legs with timber feet
    A message posted at WOODWEB's Furniture Making Forum (8/24) -- Hi. I'm making a dining room table. The timber top will be connected to a steel frame. ...

    Re: Corner rounding 3mm PVC
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/24) -- I've done quite a bit of this by hand as banders I have used in the past ...

    Re: Table saw blade coming loose
    A message posted at WOODWEB's WOODnetWORK Forum (8/24) -- If your saw has a brake, which is stopping the arbor too fast, the inertia from the blade c ...

    Re: Large adjustable shelf span
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24/25) -- Leo G- yes, I'd reluctantly mentioned that as option 3 but now am leaning ...

    Re: 20/20 catalog
    A message posted at WOODWEB's CAD Forum (7/24/25) -- I don't know about what you are asking Mike, but if you are also interested in outputting the in ...

    Re: Miele madness
    A message posted at WOODWEB's Cabinetmaking Forum (7/24/25) -- Thanks Mark, I did notice that documents library, will check there again. I think ther ...

    Re: 20/20 catalog
    A message posted at WOODWEB's CAD Forum (7/24/25) -- P.S. There was a company years ago that did yachts who contacted me to take their cad output dat ...

    Re: Laguna dust collector
    A message posted at WOODWEB's Business and Management Forum (7/24/25) -- I’ve had similar issues with delayed replacements. If you need a quick worka ...

    Re: Miele madness
    A message posted at WOODWEB's Cabinetmaking Forum (7/24/25) -- I had a similar challenge with their dishwasher. The drawings included in install docu ...

    Re: 20/20 catalog
    A message posted at WOODWEB's CAD Forum (7/24/25) -- Interesting. Yes we are looking at Design to CNC, with full pricing capabilities. Currently usin ...

    Re: Miele madness
    A message posted at WOODWEB's Cabinetmaking Forum (7/24/25) -- Tom, I remember when Sub Zero used to drive me nuts. Now they're the easiest ones out ...

    Re: Large adjustable shelf span
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24/25) -- What about torsion box construction. ...

    Re: Sun faded walnut kitchen
    A message posted at WOODWEB's Finishing Forum (7/24/24) -- If the original finish top coat is solvent base lacquer a penetrating dye with retarder if ...

    Re: Sun faded walnut kitchen
    A message posted at WOODWEB's Finishing Forum (7/24/24) -- If the original finish top coat is solvent base lacquer a penetrating dye with retarder if ...

    Re: Waterbased / Waterbourne Clear on Maple
    A message posted at WOODWEB's Finishing Forum (7/24/24) -- There are a few good water base coatings that are very durable , flexible and 2 part syste ...

    Re: Strip or remake
    A message posted at WOODWEB's Finishing Forum (7/24/24) -- Sanding the frame of the doors and drawer fronts and resealing these to match the frames c ...

    Drawer gang locks
    A message posted at WOODWEB's Cabinetmaking Forum (7/24/24) -- Hi hi all, I am looking for information were to find a gang lock as shown in the pictu ...

    Re: Looking for a New 5'' Orbital Sander
    A message posted at WOODWEB's Cabinetmaking Forum (7/24/24) -- I have bought them all for the shop , I was a festool guy until I bought my first mirk ...

    Re: Cabinetmakers opinion
    A message posted at WOODWEB's Cabinetmaking Forum (7/24/24) -- The horizontal grain has become common around here over past few years. We have done q ...

    Re: Power Feeder Gearbox Oil
    A message posted at WOODWEB's Cabinetmaking Forum (7/24/24) -- We use Lucas oil gear oil , it’s the clear one . Never had any problems in many differ ...

    Re: Butyl acetate
    A message posted at WOODWEB's Finishing Forum (7/24/24) -- Yes agree Butyl acetate is the good solvent for coating. NC, acrylic, PU, Vynil csn be thi ...

    Re: Pocket door slides
    A message posted at WOODWEB's Cabinetmaking Forum (7/24/23) -- Check out the KV 8092 slides. 4 hinges per door and a rack & pinion mechanism, no ...

    Tall cabinet depth when abutting base run with countertop
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/24/22) -- I'm a fan of having the tall cabinet front out from the front of t ...

    Re: Holzher 1310 edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (7/24/22) -- Ross, There are two things you should start with in an attempt to correct this issue. ...

    surface protection
    A message posted at WOODWEB's Finishing Forum (7/24/22) -- I spray a lot of lacquer finishes, and since the pandemic I've found myself shipping a lot ...

    Re: Raked crown
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/24/22) -- Here is a pic of a way to handle the interface. Think about exteri ...

    1800's Portable Saw Mill?
    A message posted at WOODWEB's Sawing and Drying Forum (7/24/22) -- We recently purchased some land and found trees growing up and through what we tho ...

    Re: 1800's Portable Saw Mill?
    A message posted at WOODWEB's Sawing and Drying Forum (7/24/22) -- I sure don't see a sawmill there. No log carriage, no shaft to carry a blade. The ...

    Recommendation on Auction Companies
    A message posted at WOODWEB's WOODnetWORK Forum (7/24/22) -- looking for recommendation of the names of auction companies that service central NJ are ...

    Re: surface protection
    A message posted at WOODWEB's Finishing Forum (7/24/22) -- Have you tried something like wax paper as the first layer? Definitely don't use bubble wr ...

    Re: surface protection
    A message posted at WOODWEB's Finishing Forum (7/24/22) -- You could bake the finishes to accelerate the curing process. ...

    Re: LAGUNA PLANER PROBLEMS
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Lacuna, Grizzley and a couple dozen more brands that you see advertised in the pages of s ...

    dust/shavins into enclosed trailer
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (7/24) -- hi, im new into this whole industrial dust collection systems and ...

    Re: A warning to newbies
    A message posted at WOODWEB's Business and Management Forum (7/24) -- In an economics class I learned that I could create wealth by taking a raw mate ...

    Re: Blum slides back ordered
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Dennis, Are these available in the same 15", 18", 21" lengths? 5/8" d ...

    Re: New To Everything :)
    A message posted at WOODWEB's CNC Forum (7/24) -- Mark B Sorry. We are 30 feet from the dock in assembly. We just did a little 8k job with 24 cabs an ...

    Re: Mini Kiln questions
    A message posted at WOODWEB's Sawing and Drying Forum (7/24) -- Do not worry about the roof angle. Thirty degrees or whatever you have is fine. Consu ...

    Re: Blum slides back ordered
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Richelieu also stocks Salice Futura under mount. Soft close or push open. ANSI grade 1, l ...

    Re: Tall Stiles
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- You know what they say about engineers? They measure it with a micrometer, ma ...

    Re: New To Everything :)
    A message posted at WOODWEB's CNC Forum (7/24) -- cabinetmaker, Are you saying that from the minute a job or cabinet hits the floor its in your tract ...

    Re: A warning to newbies
    A message posted at WOODWEB's Business and Management Forum (7/24) -- What Harold said ...

    Re: used version of cabnetware 14
    A message posted at WOODWEB's CAD Forum (7/24) -- How about Cabinet Vision v5? ...

    problem with 2k AAA pump, time to replace?
    A message posted at WOODWEB's Finishing Forum (7/24) -- Looking for some advice here. I am one man shop and value efficient workflow. I think it may ...

    Re: Flipper Doors / Countertop pocket doors
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- There is no need for hardware for an upward lifting single door - a garage door, if you w ...

    Re: Phones, Bathroom,.... Again I know..
    A message posted at WOODWEB's Business and Management Forum (7/24) -- We dealt with this issue for years. Remind...remind again. When it was just 3 o ...

    Re: Drive center ceased SCM T124 Lathe
    A message posted at WOODWEB's Furniture Making Forum (7/24) -- The issue will be cooking the seals and grease in the front bearing or bearings if you ...

    Re: problem with 2k AAA pump, time to replace?
    A message posted at WOODWEB's Finishing Forum (7/24) -- if you are spraying CV then the potlife should be long enough where you don't need an electro ...

    12/4 White Oak
    A message posted at WOODWEB's Solid Wood Machining Forum (7/24) -- Who are the "go-to" suppliers of small quantity, highest quality thick w ...

    Re: problem with 2k AAA pump, time to replace?
    A message posted at WOODWEB's Finishing Forum (7/24) -- Hi Chris, I am interested in this promix system with electronic dosing. I am not interested i ...

    Re: Poured Epoxy Bar Top
    A message posted at WOODWEB's Finishing Forum (7/24) -- My rep from Wurth Louis was in yesterday and showed me product they're carrying for this. A 2 ...

    Re: Poured Epoxy Bar Top
    A message posted at WOODWEB's Finishing Forum (7/24) -- I agree with Adam. Besides the epoxy, the 2 other essentials for a pour on finish are either ...

    Re: problem with 2k AAA pump, time to replace?
    A message posted at WOODWEB's Finishing Forum (7/24) -- I use a graco promix 2KE to spray 2k urethane with a kremlin 10-14 and graco pump for catalys ...

    Re: Weeke BP60 computer
    A message posted at WOODWEB's CNC Forum (7/24) -- Thanks for the reply It is a pentium processor with CB61 ACP motherboard, we think motherboard is d ...

    Re: Milesi 2k primer and pigmented topcoat waterborne
    A message posted at WOODWEB's Finishing Forum (7/24) -- How did your Milesi experiment go? I'm about to do the same thing. ...

    Poured Epoxy Bar Top
    A message posted at WOODWEB's Finishing Forum (7/24) -- Any good recommendations for a product and/or supplier for a poured epoxy bar top? Thanks. ...

    Re: Poured Epoxy Bar Top
    A message posted at WOODWEB's Finishing Forum (7/24) -- System3 Mirror coat Envirotex Epoxy scratches easily ...

    Re: Widebelt sander help
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Thank you all for your suggestions!!!! ...

    Re: Cnc service, or lack of?
    A message posted at WOODWEB's CNC Forum (7/24) -- Where are you located? ...

    Re: Why are these end panels bowing?
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Thanks. The finisher being the issue hadn't occured to me. - "Finish the back for a ...

    Re: Widebelt Sander Help Needed
    A message posted at WOODWEB's Solid Wood Machining Forum (7/24) -- Costa sets the pinch rollers 0.05mm below the shoes from the factory. This causes ...

    Re: Why are these end panels bowing?
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- The finisher needs to use the same materiel on the back and front. A panel secured to the ...

    Re: Why are these end panels bowing?
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Yep. I live in humid Florida now. Balancing humidity intake is always something that's di ...

    Re: Stiles construction interior shaker doors
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- Pat - Yes. I am aware of one manufacturer of 6 panel pine interior doors (in ...

    Cabinet vision
    A message posted at WOODWEB's CAD Forum (7/24) -- Patience with this question please. I'm a bench hand. Not a program guru. Our firm uses caninet vis ...

    Re: RE: Used Wide Belt Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (7/24) -- If you would like you can private message me. I work for an abrasives company and ...

    Removing Wood Glue
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Hello, I want to remove some glue from the surface of rustic wood. I can't sand it. Is th ...

    Re: Woodtek Wide belt sander Felt for Platen
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Usually the best off the shelf felt is F1 pressed. I like firmer material but for most ma ...

    Re: Removing Wood Glue
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Sure would make it easier if we knew what kind of glue. There is an adhesive forum here. ...

    Re: Why are these end panels bowing?
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Finishing has to be equal on both sides the panel has to be balanced. ...

    Re: Honest Money Answers Please
    A message posted at WOODWEB's Business and Management Forum (7/24) -- JSO has a point. You can't run a business w/o knowing your costs. Commercial wo ...

    Re: Which Air Compressor
    A message posted at WOODWEB's Business and Management Forum (7/24) -- Jerry I think you are being a little sensitive. Everyone is in a different plac ...

    Re: cnc dust collection
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (7/24) -- For us a lot would depend on your shoe. We pick up from our 10hp ...

    Re: Marketing
    A message posted at WOODWEB's Business and Management Forum (7/24) -- Hands down cold calls to builders. I've tried designers and architects as well ...

    Re: Bit of an odd question about getting samples
    A message posted at WOODWEB's Finishing Forum (7/24) -- Norfolk is 700 miles. Wurths KY branch is the closest, 160 miles. They dont service our area. ...

    Re: Inset doors
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- We do it pretty much like Karl. We use 1.5" stiles. 90% of our cabinets are inset. 9 ...

    fitting an open face frame cabinet between two walls
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- I am always thinking there must be a better way. For an example, lets say a painted open ...

    Re: Which Air Compressor
    A message posted at WOODWEB's Business and Management Forum (7/24) -- I had a Kaeser and it was a maintenance nightmare. Nearest service tech was at ...

    Re: Which Air Compressor
    A message posted at WOODWEB's Business and Management Forum (7/24) -- We have 1 10 hp Denver Gardner supplying the casework/corian shop and a 15hp Ga ...

    Re: fitting an open face frame cabinet between two walls
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- On a couple of cabinets like this where the builder and architect where ok with it, I’ve ...

    Re: What is your busiest time of year?
    A message posted at WOODWEB's Business and Management Forum (7/24) -- I just looked our sales over the past 4 years, and I learned that our busiest t ...

    Re: Which Air Compressor
    A message posted at WOODWEB's Business and Management Forum (7/24) -- I never knew that Ingersol Rand or Quincy were bottle of the barrel junk brands ...

    Re: Which Air Compressor
    A message posted at WOODWEB's Business and Management Forum (7/24) -- We went from 2 10hp Curtis recips to one 25hp Curtis screw. The recips were OK ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (7/24) -- Well, it is a question for newbies which I feel is good for sharing. When I first started on ...

    Re: Shipping
    A message posted at WOODWEB's Business and Management Forum (7/24) -- It does look rather foolproof but you can never be too safe. Ensure you ask the ...

    Re: Bit of an odd question about getting samples
    A message posted at WOODWEB's Finishing Forum (7/24) -- Explain to them that you are trying to find a standard product. You will need $2k of that pro ...

    Re: Bit of an odd question about getting samples
    A message posted at WOODWEB's Finishing Forum (7/24) -- I agree with The Google. MLC never provided anything free. Wurth was agreeable to a point on ...

    Re: What is your busiest time of year?
    A message posted at WOODWEB's Business and Management Forum (7/24) -- Tomorrow. I'm not complaining, (maybe whining a bit), but tomorrow will be busi ...

    Re: Which Air Compressor
    A message posted at WOODWEB's Business and Management Forum (7/24) -- We have a 15hp Atlas Copco. It doesn't have enough time on it for me to complai ...

    Re: Painted White Oak
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- I typically use the 23 gauge pinner as well for cabinet doors. Space balls ar ...

    Cabinet hinge suggestion
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/24) -- I need a hinge for a three-quarter inch door that is beveled for an i ...

    mdf glue with good open time
    A message posted at WOODWEB's Adhesives Forum (7/24) -- I normally use various tight bond glues for most of the work I do. I want to build some inter ...

    Re: hit the skids.
    A message posted at WOODWEB's Sawing and Drying Forum (7/24) -- Tim, I had some time to review your website. I like your style.The view from your cab ...

    Re: Recommendations for construction (dowel) boring machine
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- I am not sure how much of a hurry you are in to get a machine, but I have seen a couple o ...

    Re: Multicam CNC
    A message posted at WOODWEB's CNC Forum (7/24) -- We are on our second Multicam, first was 4x8 2 head, ran it for13 yrs, out grew it. For last 7 yrs ...

    Re: Bit of an odd question about getting samples
    A message posted at WOODWEB's Finishing Forum (7/24) -- mark, my experience with mlc is they don't generally provide samples at no charge. we don't d ...

    Re: Painted White Oak
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- Same as I treat a breadboard end on a wide counter. I pin it about 6-8" ...

    Re: Rope turned leg
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Try Turntech. customturnings.com. They've done dozens of barley twist and other custom le ...

    Re: Painted White Oak
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- If the panel is just flat, then glue the center of the two panels with the gr ...

    Re: Wire brushing lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (7/24) -- Just built our own using an old wide belt sander. Fairly involved project but now ...

    Re: What is your busiest time of year?
    A message posted at WOODWEB's Business and Management Forum (7/24) -- I've been retired for a while now, but early fall was always the busiest with h ...

    Re: Ml Campbell water base
    A message posted at WOODWEB's Finishing Forum (7/24) -- I tried it once a year ago because it was easier to get a color match as I use Campbell for a ...

    What is your busiest time of year?
    A message posted at WOODWEB's Business and Management Forum (7/24) -- I'm curious to know if the busiest times of year for shops are pretty similar a ...

    Re: PPS Environmental Alternatives
    A message posted at WOODWEB's Finishing Forum (7/24) -- If they are clean they should be OK to put in the recycle bin. I have no trouble cleaning the ...

    Re: What is your busiest time of year?
    A message posted at WOODWEB's Business and Management Forum (7/24) -- February through June. I live in a resort town and most all work has to be done ...

    Re: Which Air Compressor
    A message posted at WOODWEB's Business and Management Forum (7/24) -- We have 2 Atlas Copco rotary screw units. A 15hp main and a 10hp backup, both h ...

    Rope turned leg
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Hello all, I have been asked to make a card table for a client and need a source for a fa ...

    Re: Planer head
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Adam, Thanks for the help, there is about a 3/8 inch hole and I beleive it is tapered a b ...

    Re: Bit of an odd question about getting samples
    A message posted at WOODWEB's Finishing Forum (7/24) -- mark, keep looking for a supplier that will let you test stuff for free. our new supplier, ic ...

    Re: Painted White Oak
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- Leo, That is is very interesting idea. Never thought of that one. In theory y ...

    Re: Bit of an odd question about getting samples
    A message posted at WOODWEB's Finishing Forum (7/24) -- If you are in the mid Atlantic, how far is the nearest Wurth? I use their Norfolk Virginia St ...

    Re: Bit of an odd question about getting samples
    A message posted at WOODWEB's Finishing Forum (7/24) -- I am in South Jersey and have a great supplier, if you like Valspar. Been with them about 20 ...

    Michael Weining RondaMat Machine 937-965, Type R937
    A message posted at WOODWEB's Solid Wood Machining Forum (7/24) -- Manuals for Rondamat Looking for Manuals for the Ronda mat Machine No. 937-965, Ma ...

    Re: What is your busiest time of year?
    A message posted at WOODWEB's Business and Management Forum (7/24) -- July-Sept. For the last 3 years its been busy June to early Jan though (think i ...

    Re: Can anyone recognize this control?
    A message posted at WOODWEB's CNC Forum (7/24) -- sure its Albatros Tpa we use it in the last 4 years with also chines cnc what pp do you need ? from ...

    Re: Bit of an odd question about getting samples
    A message posted at WOODWEB's Finishing Forum (7/24) -- We are in rural mid Atlantic. Our next closest distributor is 160 miles away. ...

    Re: Producing a modular line of cabinet? To build in a semi custom shop?
    A message posted at WOODWEB's Business and Management Forum (7/24) -- Thanks, Mark this is helpful. ...

    Re: hit the skids.
    A message posted at WOODWEB's Sawing and Drying Forum (7/24) -- WOW 660 Eagle Scouts!!!! What a HONOR!!! Congrats to them ALL, a GREAT achievement!!! ...

    Re: Inset doors
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Rear brackets are good for retrofits. So far that's the only reason I use them. ...

    Re: What is your busiest time of year?
    A message posted at WOODWEB's Business and Management Forum (7/24) -- Spring ...

    Re: Exterior Wood Door Questions
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- I hardly speak with the voice of vast experience, but the guy who taught me t ...

    Re: Exterior Wood Door Questions
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- Glue? Do not use TBIII as it fails in temps as low as 170 F degrees. If the d ...

    Re: Waterborne finish and hickory
    A message posted at WOODWEB's Finishing Forum (7/24) -- Arhur, I hate raising the grain because it's an extra step and often doesn't work with really ...

    Re: Outlet in drawer
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Rather than putting it in or behind the drawer, where the cord will be pulling over the b ...

    Re: making my own cabinet jack
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/24) -- I used suspension fittings for years but have a contractor that likes ...

    Re: Apply Face Frames after Finsh
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- I started doing this several years ago. Our full overlay cabinets areceasiest because all ...

    Re: Waterborne finish and hickory
    A message posted at WOODWEB's Finishing Forum (7/24) -- Thanks for all the responses. I am going to try the "seal coat" on the drawers to s ...

    Apply Face Frames after Finsh
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- For those of you who use prefinished plywood for your cabinet boxes how do you attach the ...

    Re: making my own cabinet jack
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/24) -- I think Bruce means blocks to set the upper cabinets on. You would pu ...

    Re: Waterborne finish and hickory
    A message posted at WOODWEB's Finishing Forum (7/24) -- Be careful with grit choices....as someone has already pointed out, you may begin to 'burnish ...

    Re: Reverse Table Saw
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- Not a good idea Step away for some reason, go into the next day, just forget ...

    Outlet in drawer
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- I am building a custom free standing vanity/make up desk for a client. She wants the top ...

    Re: Outlet in drawer
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- I have had good luck putting a slim plug strip in near the top of the drawer box opening ...

    Re: Waterborne finish and hickory
    A message posted at WOODWEB's Finishing Forum (7/24) -- We finish Hickory all the time with GF topcoats. We sand to 150g. Use a coat or two of Zinnse ...

    Re: Waterborne finish and hickory
    A message posted at WOODWEB's Finishing Forum (7/24) -- Jeremy, Sealcoat is dewaxed, 2# cut. It's what we are all talking about spraying and it spray ...

    Re: Reverse Table Saw
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- I can't remember anyone in 15 years on WW asking the reverse TS question, so ...

    Re: Outlet in drawer
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Have them put a regular box in the the back of the cabinet. Install another small outlet ...

    Need help finishing wood coffee table
    A message posted at WOODWEB's Finishing Forum (7/24) -- Customer wants a coffee table made of wood to have the same finish as the letter "M" ...

    Re: Reverse Table Saw
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- More than just your modest humble opinion Steelie - you are dead on right on ...

    Re: Outlet in drawer
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- You might want to consult the electrician that is going to wire it as a first step. ...

    Re: making my own cabinet jack
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/24) -- What are t-blocks? Can you show a picture? ...

    Re: z offset in holzher promaster
    A message posted at WOODWEB's CNC Forum (7/24) -- nevermind, the table was activated and wouldn't let me change values ...

    Re: Outlet in drawer
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Marine & RV have nice black small 110v wall outlets. ...

    Re: Apply Face Frames after Finsh
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Pocket screws ...

    Biesse Cnc
    A message posted at WOODWEB's CNC Forum (7/24) -- HOW TO INSTALL BIESSE ROVER CNC. INTIME NETWORK DRIVER ...

    Re: Dust collection safety requirements, bypass of moulder safety devices
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (7/24) -- I've been through all of this during the past three years and bou ...

    Re: Pernicious Regulation & Govt mandated hearing protection
    A message posted at WOODWEB's Business and Management Forum (7/24) -- The trouble you attribute to "exploitation" is called the tragedy of ...

    Re: Pricing paint jobs
    A message posted at WOODWEB's Finishing Forum (7/24) -- In other words if you haven't done much of this work it's tough to look at a job and know how ...

    Re: sand paper
    A message posted at WOODWEB's Finishing Forum (7/24) -- Bart, The euro grit size vs US/everybody else makes a huge difference with clogging,abrasion ...

    Re: Pernicious Regulation & Govt mandated hearing protection
    A message posted at WOODWEB's Business and Management Forum (7/24) -- In a way both are right. The builder has to understand the housing market and h ...

    Re: Pernicious Regulation & Govt mandated hearing protection
    A message posted at WOODWEB's Business and Management Forum (7/24) -- Pat, There is also something called "externalizing the social costs of pro ...

    Re: open frameless cabinets
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- Based on how I interpreted the original question and, the plans later provide ...

    Re: Air filter for finishing room
    A message posted at WOODWEB's Finishing Forum (7/24) -- Chris, clothes could be part of it. There's an area around the ac unit that could also be sus ...

    Re: hickory table tops
    A message posted at WOODWEB's Finishing Forum (7/24) -- I fill the knots prior to finishing 2 different ways; the method I've been doing for years is ...

    Re: Pernicious Regulation & Govt mandated hearing protection
    A message posted at WOODWEB's Business and Management Forum (7/24) -- "I would like to see far more stringent and costly regulation around energ ...

    hickory table tops
    A message posted at WOODWEB's Finishing Forum (7/24) -- recently took a job where hickory with heavy character was requested, Table tops and bar top ...

    Re: open frameless cabinets
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- As Leo said, there are a lot of ways to do it. I've done quite a few with som ...

    Re: wheelchair motor wiring for auto feed
    A message posted at WOODWEB's Sawing and Drying Forum (7/24) -- Rod I have been thinking about adding a power feed to our mill. I see you have a link ...

    Re: epoxy vs bondo on flooring
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- I charge extra for holes as they are a real pain to fill. I used epoxy tinted ...

    Re: Planer Digital Read Out
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- I have Pro Scale that was on my Powermatic planer for about three months. I put it on the ...

    Re: Everlast polyurethane from Hood
    A message posted at WOODWEB's Finishing Forum (7/24) -- A word of caution on the shellac. Make a sample board and test for color match and adhesion. ...

    Re: wheelchair motor wiring for auto feed
    A message posted at WOODWEB's Sawing and Drying Forum (7/24) -- Lester, I think a car window motor wont work because it is a lot smaller when a wheel ...

    Re: Planer Digital Read Out
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- My wixey read out is in .001" scale. One button to zero out. On my shaper. ...

    Re: sand paper
    A message posted at WOODWEB's Finishing Forum (7/24) -- I love the Abranet paper but have trouble buying it. Who has the best mail order pricing on i ...

    Re: epoxy vs bondo on flooring
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- Installing floors with holes is unprofessional. Bondo, filler, really? ...

    Re: epoxy vs bondo on flooring
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- Here is a Idea, don't install flooring with holes in it. ...

    Re: epoxy vs bondo on flooring
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- maybe that is what his customer wanted nicko ...

    Re: GF EnduroVar
    A message posted at WOODWEB's Finishing Forum (7/24) -- I tried their flat poly, just foam brushed 4 coats on bare walnut. Next morning I sprayed Fan ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/24) -- Hey question...thinking about wage as a larger topic and how it feels to have t ...

    Martin T-41 Planer
    A message posted at WOODWEB's Solid Wood Machining Forum (7/24) -- I am setting up a 1969 Martin T-41 planer; four knife head, solid table. Since its ...

    Re: elliptical templates
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- I want to lay about 200' of laminate flooring and I am considering using an a ...

    cutting laminate flooring
    A message posted at WOODWEB's Sawing and Drying Forum (7/24) -- I want to lay about 200' of laminate flooring and I am considering using an abrasive ...

    Cabinet vision
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- I'm using cabinet vision 4.2.1. I know, old, but that's what i have to work with. Does an ...

    Re: Milling MDF
    A message posted at WOODWEB's CNC Forum (7/24) -- Make sure it's not lightweight MDF, Trupan, etc. It has a lot less binder (which is why it's lighte ...

    Re: residential/commercial
    A message posted at WOODWEB's Business and Management Forum (7/24) -- Larry, that is nice work! I'm hoping I can get some input from a shop that prod ...

    Re: Biesse Rover 30 jerky motion on corners
    A message posted at WOODWEB's CNC Forum (7/24) -- There are a few reasons this may be happening. Deceleration and acceleration settings are wrong or ...

    Re: 8" sander for large painted panels?
    A message posted at WOODWEB's Finishing Forum (7/24) -- Switching from 5" to 6" makes a big difference. We switched in 2000. The area is mu ...

    Re: residential/commercial
    A message posted at WOODWEB's Business and Management Forum (7/24) -- Nice work Tom. Only about 20% of our work is in solid wood & veneers. Fair ...

    Re: Wall mounted vanity
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- As was said Full flat 3/4 back. got called to fix a small hotel 60+ vanities where the or ...

    Re: Milling MDF
    A message posted at WOODWEB's CNC Forum (7/24) -- Thank you all. I will check the code to make sure I'm using G02 or G03. I think the material is a b ...

    Re: Wall mounted vanity
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- There is a steel mounting system made in Europe for this application. The brackets mount ...

    Looking for ideas on how you organize my tools for installations
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/24) -- Currently I have to schlep 4 milk crates and 3 brand name Husky tool ...

    Re: Kitchen and bathroom cabinet/ vanity finishs
    A message posted at WOODWEB's Finishing Forum (7/24) -- Try ML Campbell waterborne lacquer, Its a good finish that won't kill you on the jobsite.. Ye ...

    Re: Looking for ideas on how you organize my tools for installations
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/24) -- If the job is large enough I like a rolling cart. That said I try and ...

    Re: Delta 20" Bandsaw Tire Replacement...
    A message posted at WOODWEB's Solid Wood Machining Forum (7/24) -- Carter has this kind of thing in a few versions. They seem to know a lot about ban ...

    Re: chop saws
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Look at CTD saws. Far more than just a chop saw, its rigid cast iron build is solid and r ...

    Re: Anyone in Vegas?
    A message posted at WOODWEB's Business and Management Forum (7/24) -- Have yet to attend a Vegas show (Atlanta is a short drive) But it would be a pl ...

    Re: chop saws
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Omga makes a nice saw. They & Razorgage offer optimizing pusher stop systems that are ...

    Re: Wall mounted vanity
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Thank you all for your comments and suggestions-much appreciated. Love the Woodweb Jr ...

    Re: Wall mounted vanity
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- Also the powerdrive screws from FastCap are really nice. ...

    What is the best miter saw setup?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/24) -- Is the Festool worth it? ...

    Re: Contact Roller for Wide Belt
    A message posted at WOODWEB's Solid Wood Machining Forum (7/24) -- Hard drums give a smaller contact area so the grains on the abrasive belt penetrat ...

    Re: Entering the entry door Business
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- Hardware? The better ones won't let you buy wholesale, you will have to pay r ...

    Re: Contact Roller for Wide Belt
    A message posted at WOODWEB's Solid Wood Machining Forum (7/24) -- Hi Adam, Thank you for responding.We run a 2 Head 53" Bore. 1st Head is 70 Sh ...

    Solar kiln : Leave Circulation fans on after sunset
    A message posted at WOODWEB's Sawing and Drying Forum (7/24) -- Hi, I build my solar kiln a few years ago and it's working very well. I had to move i ...

    Re: glue creep
    A message posted at WOODWEB's Furniture Making Forum (7/24) -- I have a commission for some bent lamination work and in my reserch I came across the ...

    Re: Alternating glossiness in solid surface
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/24) -- You really need to determine if the streaks consist of scratch pattern o ...

    Cabinet vision maintenance and support renewal
    A message posted at WOODWEB's CAD Forum (7/24) -- I didn't renew my maintenance and support when it came up in January. Now I have salesmen contactin ...

    Re: Jet Tablesaw Blade Creep!
    A message posted at WOODWEB's Furniture Making Forum (7/24) -- I'm thinking about where you could have slop in the mechanism. Have you checked the sl ...

    Re: Entering the entry door Business
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- yep, all good advice. I am mainly wondering if I could find an interlocking b ...

    Re: Entering the entry door Business
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- We do lots of entry doors but also cabinetry and millwork. Entry doors are a ...

    Re: Contact Roller for Wide Belt
    A message posted at WOODWEB's Solid Wood Machining Forum (7/24) -- Beware of using feed roller or conveyor roller companies. It seems many of them ca ...

    Table rings on SCM T130
    A message posted at WOODWEB's Solid Wood Machining Forum (7/24) -- Hey guys, I have a 2000 era T130 that only came with the two largest table insert ...

    Re: Avonite gloss finish
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/24) -- Those scratches are coming from the earlier coarse grits and are not bei ...

    Re: Is there a practical limit to how small a kiln can be?
    A message posted at WOODWEB's Sawing and Drying Forum (7/24) -- If the lumber is fairly dry, you can put it in a heated room...120 F and 25% - 30% RH ...

    Re: Solar kiln : Leave Circulation fans on after sunset
    A message posted at WOODWEB's Sawing and Drying Forum (7/24) -- Continue until the kiln cools and the RH inside reaches over about 50% RH with dry lu ...

    Re: adhesive of sanding conveyor belt
    A message posted at WOODWEB's Solid Wood Machining Forum (7/24) -- If it is a rough top conveyor make sure to stick with natural rubber. Also, if you ...

    Re: Entering the entry door Business
    A message posted at WOODWEB's Architectural Woodworking Forum (7/24) -- We use ball bearing hinges from Onsward. They are available in Canada through ...

    Re: cherry characterstics
    A message posted at WOODWEB's WOODnetWORK Forum (7/24) -- A gum pocket has a void or space if the gum were removed. A gum streak is merely the stain ...

    Re: Jet Tablesaw Blade Creep!
    A message posted at WOODWEB's Furniture Making Forum (7/24) -- I think there must be something loose in the trunnion. I'd flip it over on it's top, t ...

    Re: Jet Tablesaw Blade Creep!
    A message posted at WOODWEB's Furniture Making Forum (7/24) -- Keith, that's what I'm suspecting too. Never having done that I suppose I'll need to r ...

    Re: Jet Tablesaw Blade Creep!
    A message posted at WOODWEB's Furniture Making Forum (7/24) -- Rich, using a Tenryu Gold Medal, also an Amana rip blade. Doesn't seem to make a diffe ...

    Re: Need glue suggestion to bent Laminate on alu ?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/24) -- Thanks for your reply Tracy, But..... Vacuum lamination and contact ceme ...

    Re: out door furnirure marine plywood
    A message posted at WOODWEB's Furniture Making Forum (7/24) -- Yes, left unsheathed, all plywood will fail PDQ. Exposed plywood is only recommended w ...

    Re: Need glue suggestion to bent Laminate on alu ?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/24) -- Using contact you dont need to bag it just spray and stick. Scuff the al ...

    Re: Need glue suggestion to bent Laminate on alu ?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/24) -- scuff and use solvent based contact. ...

    Re: Manufacturing in 10 years.
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/24) -- I think it's hard to accurately predict anything 10 years out. A majo ...

    Re: Manufacturing in 10 years.
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/24) -- Personally, I think the small custom shop with CNC capability is well ...

    Re: Manufacturing in 10 years.
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/24) -- From reading this article the off-shoring thing is going to change. I ...

    Re: New wood door sill
    A message posted at WOODWEB's WOODnetWORK Forum (7/24) -- I would consider white oak. ...

    Re: Biesse or Felder
    A message posted at WOODWEB's CNC Forum (6/24/25) -- We have had a Felder cnc bought brand new five years ago. Shortly after year two, the spindle he ...

    Re: LUMBER GRADES
    A message posted at WOODWEB's Sawing and Drying Forum (6/24/25) -- Talk to your lumber supplier about exactly what you need. Most of them are willing ...

    Re: reflecting on a long career
    A message posted at WOODWEB's Cabinetmaking Forum (6/24/25) -- Mitrefolds is a big one. Man we fold up some really dumb stuff from a single panel tha ...

    Re: SCN Slider Brake
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/24/24) -- You should check all electrical connections, especially ground con ...

    Selling my business
    A message posted at WOODWEB's Business and Management Forum (6/24/24) -- Looking to find the best way to sell my 20 + yr. Custom woodworking business ...

    Re: SCN Slider Brake
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/24/24) -- You should check all brake pads for wear or damage, then check the ...

    Re: Black edgebanding
    A message posted at WOODWEB's Cabinetmaking Forum (6/24/24) -- Maybe rent time on another shops edgebander? ...

    Paper-laminated foam board to wood?
    A message posted at WOODWEB's Adhesives Forum (6/24/23) -- Seems many things would work for this, but I have no experience adhering anything to foam ...

    Re: Carbide Insert Breaking
    A message posted at WOODWEB's Solid Wood Machining Forum (6/24/23) -- Out of curiosity were the broken inserts from the OEM or 3rd party supplier? ...

    Re: Need to identify type of veneer
    A message posted at WOODWEB's Veneer Forum (6/24/23) -- Or Google Jaguar forums and ask. ...

    Re: Need to identify type of veneer
    A message posted at WOODWEB's Veneer Forum (6/24/23) -- Why don't you call Jaguar? ...

    Re: Can I get a reality check on current cabinet door prices
    A message posted at WOODWEB's Cabinetmaking Forum (6/24/22) -- I sell doors by unit, because I'm putting them on cabinets typically. If I ballpark gu ...

    Typical requirements for room dividers or accent partitions?
    A message posted at WOODWEB's Architectural Woodworking Forum (6/24/22) -- Is it typical for the same codes that govern spacing between stairrail bal ...

    Re: Typical requirements for room dividers or accent partitions?
    A message posted at WOODWEB's Architectural Woodworking Forum (6/24/22) -- RichC, Fair point, you are absolutely correct. Like I said, I'm risk avers ...

    Re: Typical requirements for room dividers or accent partitions?
    A message posted at WOODWEB's Architectural Woodworking Forum (6/24/22) -- Kids get their heads stuck in between things all the time. If the child ha ...

    Re: Can I get a reality check on current cabinet door prices
    A message posted at WOODWEB's Cabinetmaking Forum (6/24/22) -- Mdf doors, $10/square foot. Raised panel, $87.35/door ¼" panel, $71.48/door Engin ...

    Re: Can I get a reality check on current cabinet door prices
    A message posted at WOODWEB's Cabinetmaking Forum (6/24/22) -- My current pricing is up about 12% from this time last year (it was overdue for an inc ...

    Re: Can I get a reality check on current cabinet door prices
    A message posted at WOODWEB's Cabinetmaking Forum (6/24/22) -- JR, Our WA state door shop after a 20% price increase a couple months ago is at $13.25 ...

    Re: Tablesaw Blades
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Forrest & FS are better blades. Period Amana use D-10 carbide. It definitely does not ...

    Re: Tablesaw Blades
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Amana, FS tool, Tenryu, all gpod for my shop. Ive never found a situation where forrests ...

    Re: Tablesaw Blades
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- I have always used and like FS tool blades, they are very good quality. I was talking to ...

    Re: Shop Sabre Pro 408
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- If you are working with asoftware and the curve investment is made i would keep working i ...

    Re: Tablesaw Blades
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Industrial Freud or FS. The FS miter saw blades out cut a Freud any day. I personally lik ...

    Re: Tablesaw Blades
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Tenryu makes a Hi ATB in that size and tooth count. I haven't used that particular blade, ...

    Design corner cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- I'm building kitchen cabinets and stuck on the design aspect. The problem I'm having trou ...

    Re: Shop Sabre Pro 408
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Thanks, what software are you guys using? I currently use KCD for my designs and it has a ...

    Re: 3d wall panel question
    A message posted at WOODWEB's CNC Forum (6/24) -- Hello, I am very new to CNC world and I would like to know the material used for 3D wall. Any resou ...

    Re: 3d wall panel question
    A message posted at WOODWEB's CNC Forum (6/24) -- is it okay with this kind of PVC (Forex) https://www.display.3acomposites.com/forex.html I will als ...

    Re: 3d wall panel question
    A message posted at WOODWEB's CNC Forum (6/24) -- MDF, (HDF is better) HDU, and i have even done some in Cast acrylic ...

    Re: Tablesaw Blades
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- DIABLO BLADES CHEAP VERY GOOD LONG LASTING ...

    Re: Tablesaw Blades
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Thank you group! ...

    Preparing SYP logs for hand hewing?
    A message posted at WOODWEB's Sawing and Drying Forum (6/24) -- Some friends are trying to save the oldest cabin in my home county in South central A ...

    Re: New Dust Collection Design
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/24) -- I would get a professional in to analyze what you have and what y ...

    New Dust Collection Design
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/24) -- We are moving to a new shop, approx 12,000 sq ft. and are looking ...

    Re: Refinishing Poplar to get green tones out
    A message posted at WOODWEB's Finishing Forum (6/24) -- I don't understand, you aren't matching & reproducing the original look? If not, use 2 pa ...

    Re: Dynapro / Blum - Maximum drawer width
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- I've used the Blum with 32" wide drawers or so. They say at those widths you should ...

    Re: Compressed wood for bending
    A message posted at WOODWEB's Furniture Making Forum (6/24) -- My experience in pre-bending wood was a happy accident. I was steaming and bending 3 x ...

    Re: Too much time estimating
    A message posted at WOODWEB's Business and Management Forum (6/24) -- I have developed a system to quote jobs by LF with a number that works for us, ...

    Re: Too much time estimating
    A message posted at WOODWEB's Business and Management Forum (6/24) -- Age old lament of the small business owner. I was so envious of the small auto ...

    Compressed wood for bending
    A message posted at WOODWEB's Furniture Making Forum (6/24) -- I have built a press to compress 1-1/2 x 3/4 x 16" pieces of solid wood prior to ...

    Re: Finish for walnut and white oak combo table
    A message posted at WOODWEB's Finishing Forum (6/24) -- Non yellowing acrylic polyurethane is the new trend on finishes that don't alter the coloring ...

    Re: Too much time estimating
    A message posted at WOODWEB's Business and Management Forum (6/24) -- Chris, After you describe your thought process the odds of getting a correct es ...

    Pressure treated plywood
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- When bidding on jobs, I keep finding specs that call for the sub-tops in wet areas to be ...

    Re: Pressure treated plywood
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Use Medex. It's a water resistant MDF. Or you might be able to use Extira which is a wate ...

    Re: Pressure treated plywood
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- They are mislabeling it. The spec should be moisture resistant. There are MR particleboar ...

    pine/spruce logs
    A message posted at WOODWEB's Sawing and Drying Forum (6/24) -- i have some white pine and white spruce logs 8"-12" that were cut a year ag ...

    Re: Compressed wood for bending
    A message posted at WOODWEB's Furniture Making Forum (6/24) -- Okay so I watched the video. I do think the pre bending will help the process. You may ...

    Re: Dynapro / Blum - Maximum drawer width
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Thanks, The drawer I need these for is 55inch wide and 15inch deep with 3/4 inch base (it ...

    Re: Dynapro / Blum - Maximum drawer width
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- I use 1/2" thick drawer sides, so my O.A. drawer width is 3/4" less than the op ...

    Dynapro / Blum - Maximum drawer width
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Hello, Does anyone know what is the max drawer width requirement when using either Blum o ...

    Vises
    A message posted at WOODWEB's CNC Forum (6/24) -- Good afternoon. I'm looking for ideas on holding solid wood on a pod and rail. Any and all pics/vid ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (6/24) -- Link to RC-33 documents: Instruction book, parts diagram, and more ...

    Re: ICA Finshes
    A message posted at WOODWEB's Finishing Forum (6/24) -- Probably Würth Bear Supply Company in Kansas City, MO is your closest ICA distributor. ...

    Re: Refinishing Poplar to get green tones out
    A message posted at WOODWEB's Finishing Forum (6/24) -- Poplar is way to soft for a table top ...

    Re: Compressed wood for bending
    A message posted at WOODWEB's Furniture Making Forum (6/24) -- Pure Timber is the source ...

    Kremlin vs HVLP Finish Quality
    A message posted at WOODWEB's Finishing Forum (6/24) -- Looking to get some feedback on the Kremlin Airmix AAA vs conventional HVLP when it comes to ...

    Re: Kremlin vs HVLP Finish Quality
    A message posted at WOODWEB's Finishing Forum (6/24) -- The general answer is no. The main reasons for going to AAA are speed, convenience and the ab ...

    Re: Kremlin vs HVLP Finish Quality
    A message posted at WOODWEB's Finishing Forum (6/24) -- Just for everyones info: DeVilbiss makes a bag kit to fit most all top cup HVLP guns where yo ...

    Re: Alphacam AUTOSTYLES
    A message posted at WOODWEB's CNC Forum (6/24) -- Autostyles are linked to layers. You have to specify the layer that you want a particular style to ...

    Re: Cabinet assembly workstation
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Michael, I pride myself in creativity but you just humbled me in a big way. That's some s ...

    Inset Frames
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- How wide do you guys make your inset face frames? I've used 1 1/2" wide stiles and r ...

    Re: INSET FRAMES
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- I'm not a big fan of those mounting plates behind the face frame, even when the frames ar ...

    Re: Kremlin vs HVLP Finish Quality
    A message posted at WOODWEB's Finishing Forum (6/24) -- for a the best finish give me a binks 7 gun or a devilbiss mbc gun there is reason they are s ...

    Selco Mechanic Charlotte NC area
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Anyone have a recommendation for a independent mechanic to put together a Selco panel saw ...

    Re: Cabinet assembly workstation
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- That's pretty good. I like to have a back bench for tools that require electricity and to ...

    Re: Screen door clips
    A message posted at WOODWEB's Architectural Woodworking Forum (6/24) -- looking for the exact same clip, Let me know if you find it please!! ...

    Re: Cost of PUR
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- What about cost difference? Is glue cost more than twice as EVA? ...

    Re: Cabinet assembly workstation
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Everything within reach. I like it, Nice work. ...

    Re: Woodpecker router tables
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Do you know which plunge router is good? ...

    Re: Kremlin vs HVLP Finish Quality
    A message posted at WOODWEB's Finishing Forum (6/24) -- +1 for what Herb said. ...

    Re: Industrial Chop Saws
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- These are really nice. ...

    Re: Cabinet assembly workstation
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Very Slick!!! ...

    Re: Satinwood veneer
    A message posted at WOODWEB's Veneer Forum (6/24) -- Looks like pomelle Sapele to me. ...

    hit the skids.
    A message posted at WOODWEB's Sawing and Drying Forum (6/24) -- I am from Hutchinson, Kansas and I am a hobbiest/logger woodworker. I am involved wit ...

    Re: New to CNC need your thoughts
    A message posted at WOODWEB's CNC Forum (6/24) -- we just bought a Biesse Rover S FT, with sweep and conveyor with zoned vac @ 20 HP, and a Rover 30 ...

    Re: tools from the past
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Scott, The tool I like the most is my late 1920's Crescent 24 inch jointer. It has babbit ...

    Re: introducing a business partner
    A message posted at WOODWEB's Business and Management Forum (6/24) -- quit wasting your time most successful businesses run with a single voice in ch ...

    Cabinet design program options
    A message posted at WOODWEB's CAD Forum (6/24) -- Hey guys, I have a small custom cabinet shop with 3 employees. Everything we build is custom. Until ...

    Re: Laminated walk doors
    A message posted at WOODWEB's Architectural Woodworking Forum (6/24) -- I make them buy the p-lam and I supply the labor I do not want to know how an ...

    Re: hpl board
    A message posted at WOODWEB's CNC Forum (6/24) -- Run some tests and get a chip load calculation going. We consulted Lucas @ Vortex Tools and I am su ...

    Re: Weeke error !!
    A message posted at WOODWEB's CNC Forum (6/24) -- Manually remove the tools from tool wiz, manually move the gantry by twisting the ball screw or phy ...

    Re: wood cooler lid
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- We have done work for this company in the past and they have always paid for prototypes. ...

    Re: Corner cabinet question for Dennis Bean
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- When I started doing Euro style cabinets, making the doors and drawer fronts 1/8" le ...

    Re: Metallic Gold Spray Paint
    A message posted at WOODWEB's Finishing Forum (6/24) -- First thing, throw out the painters tape!!! blue or not, it is crap. If you read the fine pri ...

    Interesting Read
    A message posted at WOODWEB's Business and Management Forum (6/24) -- Here is an article on Pat's favorite website (sarcasm) dealing with how the pop ...

    inaccurate miter cuts DW718
    A message posted at WOODWEB's Sawing and Drying Forum (6/24) -- i have adjusted the fence, made bevel adjustments and changed the blade. I bought thi ...

    Re: Metallic Gold Spray Paint
    A message posted at WOODWEB's Finishing Forum (6/24) -- The paint was not cured enough to avoid being damaged by the tape. Without knowing what kind ...

    Re: Forklift
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Thanks Jim, I'll give him a call. My 35 yr old Nissan finally threw up all of its engine ...

    Re: Forklift
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Kip 3k is a hard number for a good one. I keep my 20 year old Hyster running as it seems ...

    Favorite downgrade from undermounts
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- We have always exclusively used concealed undermounts (Grass, Blum, Salice). Wondering wh ...

    Re: Metallic Gold Spray Paint
    A message posted at WOODWEB's Finishing Forum (6/24) -- when painting cars or any other item we cant wait a week for paint to cure. That is why they ...

    Re: Mayer Saw running Ardis Optimizer
    A message posted at WOODWEB's CNC Forum (6/24) -- Did you install the license file? Many years ago when you purchased it you got a license file nuxxx ...

    Re: Solvent recycling worth it?
    A message posted at WOODWEB's Finishing Forum (6/24) -- It's not a big deal, because it doesn't create that much waste to start with. I only work wit ...

    Re: making my own cabinet jack
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/24) -- Honestly (no snark intended) Does this device help more than it gets ...

    Re: iPad app for drafting on iPad Pro
    A message posted at WOODWEB's CAD Forum (6/24) -- I would think the app would need to be cloud based but should be possible. ...

    Re: Touch latch on curved door
    A message posted at WOODWEB's Architectural Woodworking Forum (6/24) -- I'm pretty sure I've used these little mini touch latches on curves before. I ...

    Edgebander Glue Color Switch
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- We have a Brandt KD-56 Edgebander. We use a tan glue that works great with 95% of our woo ...

    Re: Edgebander Glue Color Switch
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- On large enough jobs I've switched, cartridges though, not pellets, don't know how big a ...

    Re: Source for plywood cylinders
    A message posted at WOODWEB's Veneer Forum (6/24) -- Roberts Plywood lists veneered plywood cylinders.Keller Products may also have what you're looki ...

    Re: Applying finish to Oak plywood
    A message posted at WOODWEB's Finishing Forum (6/24) -- Home depot !! Commmm-on....get serious !! Get pro stuff....any will be just better....! Home ...

    Re: cnc router issues
    A message posted at WOODWEB's CNC Forum (6/24) -- Whether you vacuum table is not full table,i think it with T-slot mixed,right?If so,you can try to ...

    Re: thermador panel
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Here are some pics of a subzero fridge/freezer done that way and another kitchen with The ...

    Source for plywood cylinders
    A message posted at WOODWEB's Veneer Forum (6/24) -- Any one know where I could purchase a pair of hollow hardwood veneered plywood cylinders approx. ...

    Re: Finishing AC Plywood
    A message posted at WOODWEB's Finishing Forum (6/24) -- The glue used to laminate the plywood likely has formaldehyde which is evaporating. It is not ...

    Re: Valspar Zenith problems
    A message posted at WOODWEB's Finishing Forum (6/24) -- I've used the Zenith for several years now and have never had this problem. I too would suspe ...

    Re: New to CNC
    A message posted at WOODWEB's CNC Forum (6/24) -- Your first CNC? Great, very productive machines. Looks like a new shop space also. Get the conveyor ...

    Re: Finishing AC Plywood
    A message posted at WOODWEB's Finishing Forum (6/24) -- I've you give a try with a pre conditioner of sort ( diluted sanding sealer) ? Oak is notorio ...

    Re: Need to find this unique knob
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- you've looked at Van Dykes and restoration hardware right ? ...

    Re: Setting new bit in cabinet vision
    A message posted at WOODWEB's CAD Forum (6/24) -- Change the allow auto select setting for your dovetail bit. ...

    Re: Finishing AC Plywood
    A message posted at WOODWEB's Finishing Forum (6/24) -- It may be the glue calendaring through the face veneer . ...

    Re: thermador panel
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- I have done this as well with thermador and subzero. ...

    Re: Touch latch on curved door
    A message posted at WOODWEB's Architectural Woodworking Forum (6/24) -- PM Dennis Bean, he is a Salice Rep. ...

    Re: cnc router issues
    A message posted at WOODWEB's CNC Forum (6/24) -- In genral,the table can abosorb many pcs plywood together. ...

    Re: CNC job cart
    A message posted at WOODWEB's CNC Forum (6/24) -- Brian, Quite the floor! No one has done conveyors? ...

    Re: Need to find this unique knob
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Hafele maybe? ...

    Re: CNC job cart
    A message posted at WOODWEB's CNC Forum (6/24) -- Great suggestions, thank you. ...

    Re: thoughts about choosing a cad program
    A message posted at WOODWEB's CAD Forum (6/24) -- I would suggest to consider what your needs are, find a software program that fills those needs, an ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- Mel Do you know the rarest trait in workers??? In my tenure I can count on one ...

    Re: Pocket Holes
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- For 30 years, I avoided two things: Veneer tape edges and pocket holes. I was - and still ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- lol totes millennial! I get your concern but hang in there. Someone must be wat ...

    Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- I could really use some advice from some management/owner types about this one. ...

    refinishing Kitchen cabinets
    A message posted at WOODWEB's Finishing Forum (6/24) -- I've had several recent requests from customers about refinishing their kitchen cabinetry. Th ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- Mel, I'm going to go out on a limb here and conclude you were probably raised w ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- "Beer:30 was a relief!" That. THAT. That!! Kay so I got sent to LEAN ...

    Reversing the effects of wood bleach on oak
    A message posted at WOODWEB's Finishing Forum (6/24) -- I have a solid white oak dining table. I prepared a sample for my client where I wiped on a l ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- Try working on an assembly line. Put nut "A" on bolt "K", d ...

    CMS idea 150 or power 5 axis
    A message posted at WOODWEB's CNC Forum (6/24) -- I have been looking at purchasing a 5 axis Machine for doing complex curves chairs etc. I have been ...

    Re: Charcoal grey spray stain???
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- We had a similar situation. The client wanted to match a maple door that was grey but had ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- Hah! Actually both those leaders were total misfits. Franklin didn't graduate s ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- So I can't bite my tongue on this one. Did Abe Lincoln suck it up? Did Ben Fran ...

    Re: large furniture parts
    A message posted at WOODWEB's Furniture Making Forum (6/24) -- Mike- nice work and I think people here are trying to tell you something. We make cust ...

    Re: MLC color variances
    A message posted at WOODWEB's Finishing Forum (6/24) -- Claw lock is a primer. It does not need to be color consistent and you shouldn't assume that ...

    Re: Pocket Holes
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- There is a time and place for pocket holes. Educate your contractor on the benefits. Actu ...

    Re: refinishing Kitchen cabinets
    A message posted at WOODWEB's Finishing Forum (6/24) -- Man, I avoid refinishing at all costs. I'd only do it to keep the doors open, and even then w ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- Those people were leaders. You are an employee. Work your way up the ladder lik ...

    Re: Reversing the effects of wood bleach on oak
    A message posted at WOODWEB's Finishing Forum (6/24) -- At this point you can't put the toothpaste back in the tube and the solution to get out of it ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- I suspect we've all done boring jobs. One year I stapled homosote to plywood fo ...

    Re: Improving Information Flow
    A message posted at WOODWEB's Business and Management Forum (6/24) -- RE: cloud You'll have a hard time convincing me to go to the cloud system. At l ...

    Re: Pocket Holes
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Pockets have a place, not door assembly. I'm not of fan of using them for case assembly e ...

    Re: edgebander tape roll finish sensor
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- My guys watch the edgebander,, so much for Humor... you could make a laser switch that ri ...

    Re: refinishing Kitchen cabinets
    A message posted at WOODWEB's Finishing Forum (6/24) -- It's no problem but IMHO it is better to use a WB pigmented finish than to use a solvent base ...

    Re: Reversing the effects of wood bleach on oak
    A message posted at WOODWEB's Finishing Forum (6/24) -- Usually the bleached wood isn't very deep, I'd give the random orbital a try first...that sai ...

    Re: Reversing the effects of wood bleach on oak
    A message posted at WOODWEB's Finishing Forum (6/24) -- Did you neutralize the bleach? A wide belt sander would be the best way to get back to wood n ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- Sorry Mel, I have to agree with the suck-it-up crowd. How long have you been on ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- Is there anything you won't whine about? Suck it up, work harder. One pays one' ...

    Pocket Holes
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Hi Have you had complaints with contractors or homeowner with the use of pocket holes. I` ...

    Re: Folding desk hardware
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Hafele offers their Tikla Folding Table Bracket, 660lbs/pr, in four different lengths. If ...

    Re: Winner90 indice.prg question?
    A message posted at WOODWEB's CNC Forum (6/24) -- Mal, contact Casadei Busellato, they will have a copy of your software. They can email it to you. T ...

    Re: Charcoal grey spray stain???
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- just plain old maple Im not sure if the sherwin williams where i live has spray stain or ...

    Vortex 7600 Dovetail bit and CV
    A message posted at WOODWEB's CNC Forum (6/24) -- Anyone using a Vortex 7600 with CabinetVision, we are setting up a Flat Table and the Coordinates a ...

    Re: Winner90 indice.prg question?
    A message posted at WOODWEB's CNC Forum (6/24) -- I have a Busellatto Supermaster H150 1996 model,i need the software for it and im told its winner90 ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- Is it just another case of the ceiling for women? What a millennial, just shut ...

    Re: Winner90 indice.prg question?
    A message posted at WOODWEB's CNC Forum (6/24) -- Hi mal Contact busellato they could probably attach winner 90 to an e-mail or even ask them for gen ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- "Is there anything you won't whine about?" Is there anything you don' ...

    Re: refinishing Kitchen cabinets
    A message posted at WOODWEB's Finishing Forum (6/24) -- If you don't get a good answer here, you might consider going to the painttalk forum and aski ...

    Re: Folding desk hardware
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Folding Leg under an offset bracket attached to wall with depth equal to the thickness of ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- If you're going to bitch at my shop you better be able to make it rhyme. ...

    Re: large furniture parts
    A message posted at WOODWEB's Furniture Making Forum (6/24) -- We make these all the time. www.hansonwoodturning.com under square turnings ...

    Re: refinishing Kitchen cabinets
    A message posted at WOODWEB's Finishing Forum (6/24) -- Standard practice to use an isolation barrier. Shellac or Vinyl Sealer. ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/24) -- Do good work, The Kings will find you ...

    Re: edgebander tape roll finish sensor
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Is it really that hard? I 2nd Jim's idea. ...

    Re: edgebander tape roll finish sensor
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- Random drug tests and CT scans. ...

    Re: how long to dry oak for barn construction
    A message posted at WOODWEB's Sawing and Drying Forum (6/24) -- Gene, your comment that today's wood is not as rot resistant as it used to be intrigu ...

    Re: how long to dry oak for barn construction
    A message posted at WOODWEB's Sawing and Drying Forum (6/24) -- The Wood Handbook has recently indicated that baldcypress, redwood and pines have a d ...

    Wadkin GD5 Moulder Operators Manual
    A message posted at WOODWEB's Solid Wood Machining Forum (6/24) -- We just purchased a used Wadkin GD5 Moulder at an auction that did not have the op ...

    Re: modern furniture
    A message posted at WOODWEB's Furniture Making Forum (6/24) -- Hey Guys well i think that's an amazing shapes look like wood sculpted furniture.And i ...

    Re: Bonding Sheet Metal to Baltic Birch
    A message posted at WOODWEB's Adhesives Forum (6/24) -- Out of the glues that you have listed there the polyurethane glue would likely be the best. ...

    Re: how long to dry oak for barn construction
    A message posted at WOODWEB's Sawing and Drying Forum (6/24) -- Oops! ...future editions of this text. ...

    Re: Gorilla glue, just curious
    A message posted at WOODWEB's Adhesives Forum (6/24) -- Mr. smith's comments are worth a million. For any adhesive or chemical, Google the name of th ...

    Sloppy Inlays
    A message posted at WOODWEB's Veneer Forum (6/24) -- Hello - I'm using the 1/8" sprial router bit that came with the brass bushing set to couple ...

    Basket weave veneer panels??
    A message posted at WOODWEB's Veneer Forum (6/24) -- Hi Im trying to find a source for these veneer basket weave panels... the company that i got the ...

    Re: Laminating Beams Advice
    A message posted at WOODWEB's Adhesives Forum (6/24) -- Cedar doesn't have much structural strength, and can be brittle around knots. You should chec ...

    Re: Gorilla glue, just curious
    A message posted at WOODWEB's Adhesives Forum (6/24) -- I love the pic of "your hands" Jim. I used GG for a dozen or more outdoor projects ...

    Re: 2" FACE grain Poplar Plug or 2" Plug Cutter Needed
    A message posted at WOODWEB's Furniture Making Forum (6/24) -- On the plus side: all those folks turning short grain dowels could use some insurance. ...

    Re: carbide inserts for a planer
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/24) -- Try Great Lakes tooling their price is a third of that. 800.873.4528 ...

    waste
    A message posted at WOODWEB's Value Added Wood Processing Forum (6/24) -- Hi - As we start to market our new pellet system we need to know how much w ...

    Impeller and or motor for Murphy Rodgers
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/24/25) -- Setting up our purchased used Murphy Rodgers dust collector, m ...

    Re: 2-D autocad user but want 3-D
    A message posted at WOODWEB's CAD Forum (5/24/24) -- Hey David, I hope all is well. AutoCad may not be as fun as Sketchup. Though, AutoCad can be qui ...

    Re: automatic spraying
    A message posted at WOODWEB's Finishing Forum (5/24/24) -- thanks for feedback. We have talked to Dubois just this week and superfici i know is popul ...

    Re: automatic spraying
    A message posted at WOODWEB's Finishing Forum (5/24/24) -- great idea going to atlanta, most if not all the mfg will have all the information you nee ...

    Re: Best laser
    A message posted at WOODWEB's Veneer Forum (5/24/24) -- Thanks Chris I went to the Kern web site. I will give them a call. I am a one man shop .....I ...

    Re: Shaper w/ tenon tooling vs Single End Tenoner
    A message posted at WOODWEB's Solid Wood Machining Forum (5/24/23) -- Correy, I have quite a bit of experience using shapers for tenoning and also Eu ...

    Curved cabinet top
    A message posted at WOODWEB's Cabinetmaking Forum (5/24/23) -- Hi I am making a built in cabinet with a arched top. It will be going into an alcove s ...

    Re: Kem Aqua Plus - Dark Colors
    A message posted at WOODWEB's Finishing Forum (5/24/23) -- Bill: we can't really respond as there is not nearly enough info for us out here in timbuk ...

    Re: Curved cabinet top
    A message posted at WOODWEB's Cabinetmaking Forum (5/24/23) -- Leo. Thanks. Would you suggest 2 layers of kerfkore and then the veneer. I have no fra ...

    Re: Non-Ferrous Euro Hinges
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24/23) -- There are new hinges that are totally MRI safe, screws, and everything are ...

    Re: Curved cabinet top
    A message posted at WOODWEB's Cabinetmaking Forum (5/24/23) -- It gets pretty rigid if you put a veneer on both sides. On the unseen side you can pro ...

    Re: Altendorf F45 scoring blade
    A message posted at WOODWEB's Cabinetmaking Forum (5/24/23) -- heb eenF45 Elmo 3 . display werkt niet meer, hierdoor kan ik zaag niet meer bedienen. ...

    Solid surface end panels?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/24/23) -- I'm bidding a project where they are calling out solid surface end pa ...

    Re: Solid surface end panels?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/24/23) -- Get a hold of the person you're bidding for and bring that to their a ...

    Re: Salice or Blum face frame hinge
    A message posted at WOODWEB's Cabinetmaking Forum (5/24/23) -- Here you go, Al ...

    2k satin finish
    A message posted at WOODWEB's Finishing Forum (5/24/23) -- Sivam satin fish is dimpling. Thinned 40% ...

    Re: Salice or Blum face frame hinge
    A message posted at WOODWEB's Cabinetmaking Forum (5/24/23) -- Thank you ...

    Re: Curved cabinet top
    A message posted at WOODWEB's Cabinetmaking Forum (5/24/23) -- Kerfcore. ...

    Re: lumber warping as it is ripped
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24/22) -- Depends on what twist and goes crazy means. Most all wood has stress in it ...

    Re: lumber warping as it is ripped
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24/22) -- I would not expect to get usable 8' strips out of a board simply by rippin ...

    Re: CNC Purchase
    A message posted at WOODWEB's CNC Forum (5/24/22) -- I have zero experience with Biesseworks. I assume it's similar in function to Woodwop. It is han ...

    Re: lumber warping as it is ripped
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24/22) -- I suggest you try a new supplier who does a better job with the kiln. FAS ...

    Re: lumber warping as it is ripped
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24/22) -- I am mosty using hard maple or hickory. It doesn't seem to matter what spe ...

    Re: lumber warping as it is ripped
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24/22) -- Absolutely not normal for kiln dried furniture grade lumber. Perfectly nor ...

    Re: Door and Frame Shop Recommendations (Northeast)
    A message posted at WOODWEB's Cabinetmaking Forum (5/24/22) -- Completed face frames. We use Meridian Products, and I may have found a shop that does ...

    Re: lumber warping as it is ripped
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24/22) -- Perfectly normal. Theres not a single piece of lumber through my shop that ...

    Re: Door and Frame Shop Recommendations (Northeast)
    A message posted at WOODWEB's Cabinetmaking Forum (5/24/22) -- I've never heard of a face frame supplier. Are you asking for parts or completed face ...

    Cope and stick reversible
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- I am making some windows out of 1-1/8” material and I am looking for a cope a ...

    Re: Cope and stick reversible
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- Well, I got my bit at Eagle America. I do a fair amount of window restoration ...

    Re: new vs used CNC advice
    A message posted at WOODWEB's CNC Forum (5/24) -- Buying a used CNC router is a gamble, you need to evaluate its reliability and future maintenance c ...

    Re: Cope and stick reversible
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- My job is to sell him on high quality, with excellent customer service. I und ...

    Re: Cope and stick reversible
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- I think the problem you will run into is all the bits I know of only give you ...

    Re: Cope and stick reversible
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- Right now it has 1/16” wavy glass. I would not promise him the glass would no ...

    Seeking Shop With Widebelt Wire Brush Machine
    A message posted at WOODWEB's Solid Wood Machining Forum (5/24) -- I am looking for someone in the NYC area who has a large wire brushing machine (Su ...

    Re: Recommendation for Doors & Drawer Boxes
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Drew- thanks for the response. These guys looked like a great choice. Unfortunately they ...

    Re: DRO operation instructions
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Thanks for the response Rich. The white button raises the spindle in small increments but ...

    Re: Wood grain on top of wood grain
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- I think this is due to water popping, which creates water in the tissue to ap ...

    Re: DRO operation instructions
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Felder said, "Well, it has limited capabilities". I don't think the guy really ...

    Re: Question for Dennis
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- I have done many corner cabinets that are wider on one side than the other. I have never ...

    Re: DRO operation instructions
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- 2000 is not that old. Have you contacted Felder? ...

    Re: Question for Dennis
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Why is this question for a guy named Dennis? ...

    Re: Question for Dennis
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- We do that all the time.With No problems ...

    Re: Storing AAA pump
    A message posted at WOODWEB's Finishing Forum (5/24) -- Hi. Do this.... search Woodweb using "Acrastrip" or "Acrastrip 600". You ...

    Re: Scmi 16n sliding table saw major moving issues
    A message posted at WOODWEB's Solid Wood Machining Forum (5/24) -- Definitely use folding wedges between the beam and underside of the table to preve ...

    Re: Tilt/Turn Window Hardware - Canada?
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- Pella offers those as add-on options/retrofit for their windows, and has loca ...

    Re: Small shop relief
    A message posted at WOODWEB's Business and Management Forum (5/24) -- We received the PPP loan and so far looks good. It covered payroll for our 5 em ...

    Re: HELP WITH Z AXIS FAULT PLEASE
    A message posted at WOODWEB's CNC Forum (5/24) -- Sorry Yaakov, sometimes its a little difficult to understand what you are saying or asking. So you ...

    Re: Scmi 16n sliding table saw major moving issues
    A message posted at WOODWEB's Solid Wood Machining Forum (5/24) -- Also use the built in table lock. It is the little lever you can see in the second ...

    Re: HELP WITH Z AXIS FAULT PLEASE
    A message posted at WOODWEB's CNC Forum (5/24) -- I have attached a video For both of the tests in the video the brake is disabled You will see when ...

    Re: HELP WITH Z AXIS FAULT PLEASE
    A message posted at WOODWEB's CNC Forum (5/24) -- mathew ,if you want help please read what i asked and answer by the way bb is not error and as i to ...

    Re: Rank 6 methods of stabilizing moisture level of small kiln dried boards
    A message posted at WOODWEB's Sawing and Drying Forum (5/24) -- #1 will work well. #2 will work well, but you can skip the vacuum. A little air when ...

    Re: Moisture level fluctuation during transportation
    A message posted at WOODWEB's Sawing and Drying Forum (5/24) -- If you want to be super safe, just wrap the material with a couple of layers of lasti ...

    Flat table nesting routers
    A message posted at WOODWEB's CNC Forum (5/24) -- I'm in the process off purchasing a Morbidelli x200 5x10 2020 router has anybody out there got one ...

    Re: Sharpening a chisel.
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- Jeff , I have a Tormek Id sell it for cheap, it’s practically brand new . I’m ...

    Re: What is the method to sharpen a Carbide Staggered Tooth Moulder Head
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- Send it to Ct saw and tool , Stratford ct ...

    Re: Paint for the shop floor
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Grind it. Cheaper and lasts longer. ...

    Re: Face Frame Assembly Tables
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- We have a 5x12 castle that we bought new over 20 years ago. The old ones do not have the ...

    Castle Tsm 20 pocket machine issues
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Does anyone have a router retrofit for this machine ? My 3102hd porter cable router (the ...

    Re: Need advice Crotch Mahogany Conference table
    A message posted at WOODWEB's Veneer Forum (5/24) -- So, its going to be way easier for me to apply the crossbanding to the substrate than the face v ...

    Re: Need advice Crotch Mahogany Conference table
    A message posted at WOODWEB's Veneer Forum (5/24) -- "....can I crossband each individual veneer then trim trim them to size and bokmatch them?& ...

    CNC-Cart
    A message posted at WOODWEB's CNC Forum (5/24) -- Hello All, I am looking for ideas for a cart to load parts from the CNC onto. It's for a small 2 ma ...

    Re: Need advice Crotch Mahogany Conference table
    A message posted at WOODWEB's Veneer Forum (5/24) -- ok! This gives me hope. The veneers are currently 26" x 72" and will be trimmed to 18& ...

    Re: Castle Tsm 20 pocket machine issues
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Find a machine shop that can bore out the body of the dead router, find a Makita or rigid ...

    Re: Assembling Face Frames
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- I asked a friend who has done a lot of beaded inset kitchens he said that he uses the cas ...

    Plans for Adirondak
    A message posted at WOODWEB's CNC Forum (5/24) -- I'm looking to make an Adirondak chair or some version of it. Anyone have any good DXF drawing of o ...

    Re: Need advice Crotch Mahogany Conference table
    A message posted at WOODWEB's Veneer Forum (5/24) -- It won’t have the same effect as the face being two plied. ...

    Re: Plans for Adirondak
    A message posted at WOODWEB's CNC Forum (5/24) -- A quick online search turned up this and probably others as well. BH Davis ...

    Re: Getting really nice lumber
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- translation ...

    Re: Small edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- thanks ...

    Re: Inventory/Database software (for shop supplies)
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Yes, Excel would definitely suck at this. It's time to step up to a database. My first qu ...

    Re: Selling an Architectural Millwork Business
    A message posted at WOODWEB's Business and Management Forum (5/24) -- You need to adjust net profit and move items to net profit that wouldn't be the ...

    Re: Selling an Architectural Millwork Business
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Thank you all for your thoughts. What I’m trying to find are the avenues, speci ...

    a show of hands...
    A message posted at WOODWEB's CAD Forum (5/24) -- I was thinking it would be interesting to hear from everyone on here about what Cabinet software yo ...

    Re: Movento vs. Tandem
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Gentlemen, I have been confused. In my part of Canada, I have never before heard of side ...

    Holz Her Sprint "wish boning" on 2mm PVC
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Hi All, We have had this problem on both our old sprint 1310 and now on our 1320. By wish ...

    Re: Random rounding of corners.
    A message posted at WOODWEB's CNC Forum (5/24) -- If you purchased that machine new, you'll have free lifetime phone support provided by Anderson Ame ...

    Re: a show of hands...
    A message posted at WOODWEB's CAD Forum (5/24) -- We have run Cabinetsense Software plugin for Sketchup for years and couldnt be happier. The complet ...

    Re: Holz Her Sprint "wish boning" on 2mm PVC
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- We had this issue on a Holzher 1320, 3mm PVC tape was pulling away from the workpiece at ...

    Stripes in Finish
    A message posted at WOODWEB's Finishing Forum (5/24) -- Just finished spraying ML Campbell Stealth with a Kremlin MVX Gun, MX 14 cap and 09-094 tip. ...

    Re: holzher edgebander issue
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- You say that you get no error messages? Does it have a PLC? I've worked exclusively on HH ...

    Re: Movento vs. Tandem
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- I have to admit that the side to side adjustment on Tandem is news to me. Is that tool-fr ...

    Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- I'm presently working up a quote building a teak bookcase with glass panel doors. I've ne ...

    Re: Vacuum Receiver tank
    A message posted at WOODWEB's CNC Forum (5/24) -- Not sure how I have mine set. I bought it used at auction, changed the oil, turned it on and it's r ...

    Re: Florida Live Oak
    A message posted at WOODWEB's Sawing and Drying Forum (5/24) -- I don't mill live oak, due to my diesel / oil blade lube will not cut the pitch off t ...

    Re: Selling an Architectural Millwork Business
    A message posted at WOODWEB's Business and Management Forum (5/24) -- That net profit of 450-500k seems awfully high. Unless you are a business geniu ...

    Re: Vacuum Receiver tank
    A message posted at WOODWEB's CNC Forum (5/24) -- Its a 25hp Kaeser. If you set it to Modulating there may be cycling which will cause a pulsation? I ...

    Re: Movento vs. Tandem
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Thanks Russel. Tandem also has in and out adjustment (costs more than just side to side) ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Even though your tooling is carbide, after working the teak it won't cut as well with the ...

    Re: a show of hands...
    A message posted at WOODWEB's CAD Forum (5/24) -- Interesting... have not heard of that one before. Does it do photorealistic renderings inside sketc ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Used to be that gluing up teak was problematic due to the oil content. No idea if you are ...

    Re: Movento vs. Tandem
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Tandem does have side to side adjustment . It does not require tools. Wheel on the front ...

    Re: Holzher edgebander glue nozzle clogging
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Kleiberit has a purge/cleaner 761.0 This should help cleaning glue system by cleaning out ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- You'll be fine, hope you got/get it for a good price. Its heavy and adds up quick, a bit ...

    Re: painting rails and stiles
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- I plan on using PPG Breakthrough water based enamel. Will that have enough elasticity to ...

    Re: Vacuum Receiver tank
    A message posted at WOODWEB's CNC Forum (5/24) -- Sulliar 30 HP rotary screw. No tank. Not sure why you would want to unless you're running a small u ...

    Re: Florida Live Oak
    A message posted at WOODWEB's Sawing and Drying Forum (5/24) -- So that pretty much kills this grand idea. Thanks for all of your help guys. ...

    Vacuum Receiver tank
    A message posted at WOODWEB's CNC Forum (5/24) -- If you have a rotary screw vacuum pump are you running a vacuum receiver tank with it? ...

    Re: Stripes in Finish
    A message posted at WOODWEB's Finishing Forum (5/24) -- Have you shot some burst patterns to see if it's uniform. John ...

    looking machine data flappy for bieses rover 18
    A message posted at WOODWEB's CNC Forum (5/24) -- looking machine data flappy for bieses rover 18 ...

    Re: Stripes in Finish
    A message posted at WOODWEB's Finishing Forum (5/24) -- 8" is pretty close, move the gun back. ...

    Re: Stripes in Finish
    A message posted at WOODWEB's Finishing Forum (5/24) -- Stealth has a 10% catalyst ratio.. ...

    Re: Movento vs. Tandem
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Tandem does too. ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- The higher education system is now fundamentally an industry in pursuit of inco ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Jason, I agree. Higher Education has become, much like the public school system ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- I swear that liberalism is mental illness. At the very least an inability to th ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Pat, Zerohedge, among others, is wrong- probably 60% of the time. But then so i ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- It's time we all took back control, This time though we should not be again wai ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Jason, I think China is in more trouble then us. The plunge protection team has ...

    Re: laminating white oak onto MDF substrate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/24) -- There are two ways to do this. Veneers and solids: One is to use hardwoo ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- cabmaker, you are so off base you literally make me laugh and cry. You know I'v ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Jason, I hear you at your frustration and anger and a need for a reset. Problem ...

    Re: Compact laminate or phenolic cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Having done a little research and talking with people familiar with this product, I would ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Pat, San Francisco is not an anomaly at all. It may be an archetype but this is ...

    Re: Busellato Jet Concept M Pneumatic Cylinder
    A message posted at WOODWEB's CNC Forum (5/24) -- My understanding of the device: Magnets inside the cylinder, part of the piston assembly, that pull ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Not stupid?, Not evolving If we can all see it (barring mass hallucination) and ...

    Re: Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/24) -- Wow, what a read. Several feeders in the shop, many have run for 8 hours continuou ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- The reset is coming whether we like it or not question is do we want to be a vi ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- While this rise is wages is a good, good thing. It is not nearly enough to keep ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- FamilyMan, I notice there is a big ass forest fire going on just south of you. ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Jason, Our founders warned of a day when the populace could vote themselves mon ...

    Re: Exterior Door
    A message posted at WOODWEB's Finishing Forum (5/24) -- An acrylic catalyzed polyurethane (2K PU) is the best choice for a glossy finish in exterior ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Pat, Housing cost have been trending higher in SF for 30+ years, its not IPO mo ...

    Re: using a wipe on oil-poly on cabinet doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- We had a finisher in our town that charged incredibly high prices. He was the go-to guy f ...

    darkening wood
    A message posted at WOODWEB's Finishing Forum (5/24) -- I think i made a mistake with my wood purchase. I bought some 10/4 Sapele and when i started ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Jason, The rich aren't stupid. They might be fat and have no idea to live outsi ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- 42 jobs that are essential in San Francisco that don't pay enough to live there ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- And lastly, why must wages go up? Because inflation is not at 2% liked the cook ...

    Heat and UF glue times
    A message posted at WOODWEB's Adhesives Forum (5/24) -- Howdy, I glue up 2" recycled fir and oak doors with Vacuum bags using UF glue. We have b ...

    Re: Door Bumpers
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Before soft close we used the drill in style to prevent the bumpers from moving or fallin ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- oh hell! has this forest fire thing been going on for a while between you two?? ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Tim It is true that government infrastructure spending is a good investment som ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- FamilyMan, I didn't realize that you generate your own electricity. Without tha ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Hi Cabman is this a trap?? OK i'm going for it cellphone and the wifes (wifes f ...

    Re: Busellato Jet Concept M Pneumatic Cylinder
    A message posted at WOODWEB's CNC Forum (5/24) -- Worst part is not even sure that is the problem, manufacturer name would be best way to diagnose an ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Alan San Francisco is an anamoly. The I.P.O. money inflates housing costs. In a ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- 30 years is the same length of time as the tech boom. Thomas Sowell has covered ...

    Re: Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/24) -- J&G were very helpful. They had me measure the case temp at different location ...

    Re: Busellato Jet Concept M Pneumatic Cylinder
    A message posted at WOODWEB's CNC Forum (5/24) -- What do you mean magnetic? Any decent pneumatics company should be able to match it if you get the ...

    Re: Busellato Jet Concept M Pneumatic Cylinder
    A message posted at WOODWEB's CNC Forum (5/24) -- Any good pneumatic supplier will be able to help you. Look for a place that understands automation. ...

    Busellato Jet Concept M Pneumatic Cylinder
    A message posted at WOODWEB's CNC Forum (5/24) -- Hello, anyone have knowledge as to the manufacturer of the rodless pneumatic double acting magnetic ...

    Re: Blade Dust Collection
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/24) -- Please see attached sketches for optimum source capture. Make sur ...

    Exterior Door
    A message posted at WOODWEB's Finishing Forum (5/24) -- I have been asked to refinish an exterior flat panel wood door. The client wants a red gloss ...

    Re: Door Bumpers
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Without bumpers, how do you get the door to sit parallel with the face frame? The door do ...

    ML Campbell Aguatana
    A message posted at WOODWEB's Finishing Forum (5/24) -- Anyone tried this product yet? MLC is calling Aguatana a "WB 2K Conversion Urethane" ...

    Re: Biesseworks - Parametric arks
    A message posted at WOODWEB's CNC Forum (5/24) -- I agree with Dan. In Biesseworks the arc comands have some choices at the bottom of the window. Try ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Fortunately the rich are completely ill-equipped to survive a breakdown of soci ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- You know why the US is so f'd If you speak up against the system you get brande ...

    Acad 2017
    A message posted at WOODWEB's CAD Forum (5/24) -- Hi. I want to have the ortho and polar buttons below. But i cant figure out how to get it to show a ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Too much yik yak Go to a cost of living calculator and compare SF to other area ...

    Re: Door Bumpers
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- We do not make faceframe cabinets and use 37mm set back for system holes. The doors have ...

    Re: Door Bumpers
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- If I were still using compact hinges then I would use bumpers because the hinges would cr ...

    Re: Busellato Jet Concept M Pneumatic Cylinder
    A message posted at WOODWEB's CNC Forum (5/24) -- Try a place like this. http://rankinusa.com/ Looks like they're the US distributor for the pneumati ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- FM i'm not saying how anybody should live. I'am saying to look. Your inflation ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- FamilyMan, Did you know it is a fact that 43.6% of all statistics are made up o ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- FamilyMan, Which modern conveniences do you go without? Jason, Same question to ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Jason, You did good. Now we just got to work on that Donner Party cookbook. ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- had to look up the Donner party cookbook better stock up on seasonings ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- We can get seasonings from FamilyMan. He makes his own. ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Don't forget, only the very top 5-10% own any real stocks. ...

    DIY 5 foot wide bandsaw mill
    A message posted at WOODWEB's Sawing and Drying Forum (5/24) -- video below of a 5 foot wide homemade bandsaw mill vs chainsaw mill. ...

    Re: Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/24) -- Told ya. LOL Thats what i do is make motors hot! LOL ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- According to THIS report: ...

    Re: Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/24) -- Mark B, any Steffs? ...

    Re: Wrapping a cone
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- Ah hell- cut it big and wing it ;-) ...

    Re: darkening wood
    A message posted at WOODWEB's Finishing Forum (5/24) -- What did they sell you? African Mahogany? ...

    Cabnetware Replacement
    A message posted at WOODWEB's CAD Forum (5/24) -- I am just learning and getting my way into a family business. We do high end and very custom cabine ...

    Re: Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/24) -- Mark, Thanks for the response. I have seen conflicting statements about when to fill from sev ...

    Re: Solid Wood Casket Difficulties
    A message posted at WOODWEB's Solid Wood Machining Forum (5/24) -- Well, yes - hook and clearance angles do change with projection of knife. However, ...

    Onsrud 145g12 Amc-b
    A message posted at WOODWEB's CNC Forum (5/24) -- I have looked for quite some time to find a spare NEE AMC-B controller for our CNC. We are trying t ...

    cnc repair needed
    A message posted at WOODWEB's CNC Forum (5/24) -- I'm located in New York and own a now 14 yr old 5X10 Flexicam stealth showing signs of age. Specifi ...

    Uneven thickness and twisted 12" and 15" ironwood
    A message posted at WOODWEB's Solid Wood Machining Forum (5/24) -- I have lots of 12" and 15" wide ironwood. Looks great when they are just ...

    Re: Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/24) -- Her personal pockets may not be that deep so I hope yours are. To achieve a Piano type finish ...

    Short needle pine for pier
    A message posted at WOODWEB's Sawing and Drying Forum (5/24) -- Hi I would like to build a small (12 by 12') pier over the edge of a pond. We have ab ...

    Re: Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/24) -- I guess the seal cote filler requires sanding it off. Are you familiar with Paste Wood Filler ...

    Re: Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/24) -- If you do professional work, why buy a big box store stain? LOTS better options out there tha ...

    Re: Solid Wood Casket Difficulties
    A message posted at WOODWEB's Solid Wood Machining Forum (5/24) -- Thanks Mr. David. I thought by inserting the planer knife deep into the knife hold ...

    Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/24) -- I have been reading.... A lot. Simple question about steps to finishing red oak. 1. Minwax da ...

    Re: Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/24) -- If your wanting glass smooth, pore fill,... No. The grain filler may be the best of the four ...

    Re: Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/24) -- I'm just wanting a clear pore fill. That's why I'm looking at the crystalac. My thoughts are ...

    Re: Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/24) -- You remove the "set" paste wood filler with a piece of burlap. Sanding it off would ...

    Re: Freight Shipping
    A message posted at WOODWEB's Business and Management Forum (5/24) -- There is no magic carrier and it changes over time. Invite them in and see who ...

    Re: Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/24) -- http://www.rockler.com/crystalac-clear-waterborne-wood-grain-filler Says here to trowel it an ...

    Re: Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/24) -- I appreciate it Robert. So what other alternatives do you suggest? Like I said this is the fi ...

    Re: How would you approximate this finish?
    A message posted at WOODWEB's Finishing Forum (5/24) -- Here is a look at the texture and a quick jig I made . ...

    Re: Scraper Plane
    A message posted at WOODWEB's Furniture Making Forum (5/24) -- https://www.lie-nielsen.com/nodes/4075/scraping-planes ...

    Re: Scraper Plane
    A message posted at WOODWEB's Furniture Making Forum (5/24) -- aint nobody got time for that. use a sander. ...

    Re: How would you approximate this finish?
    A message posted at WOODWEB's Finishing Forum (5/24) -- Thanks D ...

    Re: Business or hobby
    A message posted at WOODWEB's Business and Management Forum (5/24) -- My exit plan is to not. Already my business can function pretty well on a daily ...

    Re: Business or hobby
    A message posted at WOODWEB's Business and Management Forum (5/24) -- I've been in the wood business for 20 years and it has always amazed and depres ...

    Re: Build or buy?
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- From a purely business perspective, it depends. Will it reduce the time you spend to get ...

    Re: Build or buy?
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- There is always a comparative advantage. This is why countries trade with each other. E.G ...

    Business or hobby
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Woodworking can be a great hobby. For a few it is a great business. When you ru ...

    Re: Build or buy?
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- I think it really depends upon how well set up you are to produce the pcs you could also ...

    Re: Paint grade doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- It's not the radius of the 1/8" bit people don't like, it's the rounded stile and ra ...

    Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/24) -- I have a brand new Kremlin excite gun that I have not used in about a month and I went to use ...

    Re: Waterborne pigmented finishes
    A message posted at WOODWEB's Finishing Forum (5/24) -- Interesting takes on various finishes. We had used Hood finishing's w. b. urethane for severa ...

    Re: Build or buy?
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Pat, I asked the question because I wanted to see how many out there was buying component ...

    Re: Build or buy?
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- All good responses. And all carry a lot of weight. Pat, I agree with you from the economi ...

    Re: Build or buy?
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Not hardly, I don't care what anyone thinks, just pointing out the facts that might be of ...

    Re: Business or hobby
    A message posted at WOODWEB's Business and Management Forum (5/24) -- David's observation "if this end up as our sole income we're going to have ...

    Build or buy?
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- I've always made my own trash can pull outs, spice racks, etc. one of my sales reps is ma ...

    Re: 4-axis cnc software
    A message posted at WOODWEB's CAD Forum (5/24) -- RhinoCam EXP or PRO will allow you full rotary axis functionality - much more comprehensive than th ...

    Re: Felder CNC anyone?
    A message posted at WOODWEB's CNC Forum (5/24) -- We have a Felder machine and it has been a rocky road. We process what they consider a unique mater ...

    Re: Toe kick base
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Tim, on most of my box construction the sides are full height and the bottem runs into th ...

    Re: rustic white oak dining table
    A message posted at WOODWEB's Furniture Making Forum (5/24) -- I'd only use oil if you want a part time job. Oil on a daily used table will likely ne ...

    Re: 1/8 drill
    A message posted at WOODWEB's CNC Forum (5/24) -- We do the same as cabmaker with the 5mm bit in the boring head. The benefit is that the screw slide ...

    Felder Pods
    A message posted at WOODWEB's CNC Forum (5/24) -- Does anyone have access to vacuum pods for a Felder H08 or H10 CNC machine? We have been trying to ...

    Re: Yet another Minwax adhesion issue
    A message posted at WOODWEB's Finishing Forum (5/24) -- Thank you Mike, do you happen to know if the stain colors cross reference? Apparently the &qu ...

    Re: Yet another Minwax adhesion issue
    A message posted at WOODWEB's Finishing Forum (5/24) -- FYI Mohawk is part of the same company that Behlen is (RPM); Behlen is a consumer line and Mo ...

    Wide belt contact drum recover
    A message posted at WOODWEB's Solid Wood Machining Forum (5/24) -- Looking to get a contact drum off a jet 13" widebelt recovered - has spiral g ...

    Re: Handy app for cabinet builders!
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Yeah, I've had my measures for a few years now. The thing is that it does not allow you t ...

    Re: Paint grade doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- The reason I got away from the one piece doors was the sanding of the profiles. It was ti ...

    Re: Best shims
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- We used to make a lot of specialty shims for another company. Made a jig that ...

    Re: Build or buy?
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Yes good idea. Based on the concept of comparative advantage. The link below explains the ...

    Re: Build or buy?
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Mike trash cans ,spice racks and the like i buy i make everything else,most of the stuff ...

    Re: Handy app for cabinet builders!
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- My measures and photo measures are two different apps. Photo measures is what I have, and ...

    Re: Build or buy?
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- "There is no "one correct answer" for every one." Actually there is, ...

    Re: upcut saw blade
    A message posted at WOODWEB's Solid Wood Machining Forum (5/24) -- Hi Seth, We use 18" Kanefusa ( Board Pro) 0-15-15-15 #7J91648070116. For hard ...

    Re: Felder Pods
    A message posted at WOODWEB's CNC Forum (5/24) -- Google vacuum pods there are several companies that specialize in all sorts of pods. "better v ...

    Re: Choosing water stones
    A message posted at WOODWEB's Furniture Making Forum (5/24) -- Best? No idea. I bought King about 30 years ago, still love them. The 800 grit is only ...

    Re: Vicious circle with some vintage iron
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Go to your local Napa and buy some open gear lube spray. Dry film graphite spray works to ...

    Re: Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/24) -- Dave, I cant find a part num. will u pls help me? And where can i buy it right away? Amazon m ...

    Re: Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/24) -- Dave, As silly as it seams, missing that one seal can mess with my fan pattern? ...

    Re: Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/24) -- Check your seals. You may be missing the one in your air cap or it may be torn. ...

    Re: Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/24) -- It use to be snug to take off the air cap and now its easy to take off ...

    Re: Felder Pods
    A message posted at WOODWEB's CNC Forum (5/24) -- Google vacuum pods there are several companies that specialize in all sorts of pods. ...

    Re: Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/24) -- you are missing the seal on the gun in the first photo. ...

    Re: Build or buy?
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Out of curiosity, why did you ask the question? ...

    Re: rustic white oak dining table
    A message posted at WOODWEB's Furniture Making Forum (5/24) -- I would use Danish oil. ...

    Re: Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/24) -- Heres my gun. Was there a seal at the end? ...

    Re: Stair Treads Cupping
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/24) -- I am not sure about the lamination that Adam refers to, as they look ...

    Re: Stair Treads Cupping
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/24) -- Gene, The finish is not moisture cure. I suspect the glue is moisture ...

    dark spots on solid surface
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/24) -- We have now had our second top installed on a reception counter and afte ...

    Crown on ceiling and cabinets
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/24) -- I have a job coming up where the crown on the cabinets will go to the ...

    Re: tips on machining birch
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- Sounds like that's the nature of the beast with birch it just chunks out with ...

    Re: tips on machining birch
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- Kiln dried in my book means 7 % moisture content. I would expect your same re ...

    Re: Stair Treads Cupping
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/24) -- I see where Adam is coming from about "plywood." The risers ...

    Re: Stair Treads Cupping
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/24) -- Larry, Cupping is caused by differential. The pictures show shrinkage ...

    Re: Exterior screen doors
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- We've been using Sapele on a regular basis for about 10 years. I've yet to ha ...

    Re: tips on machining birch
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- You can choose stuffs as per your budget and expectations. However, before ma ...

    Re: Exterior screen doors
    A message posted at WOODWEB's Architectural Woodworking Forum (5/24) -- Hi BH, Sapele is one of my favorite woods. We've used it for all sorts of pro ...

    Thinning Titebond II for slower set
    A message posted at WOODWEB's Furniture Making Forum (5/24) -- I read that Titebond can be thinned 5% without diminishing it's holding strength. With ...

    laminate cleaning
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/24) -- After cleaning laminate face of any glue or debris we have smear marks. ...

    Re: Stair Treads Cupping
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/24) -- The treads are wood the risers are plywood(unless my eyes don't work ...

    Re: Stair Treads Cupping
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/24) -- Adam, wrong direction! ...

    Re: Large Commerical Bar Top
    A message posted at WOODWEB's Furniture Making Forum (5/24) -- We used to use titejoint fasteners for this application, but have found "zipbolts ...

    Re: Glue Up Misshap
    A message posted at WOODWEB's Veneer Forum (5/24) -- Get yourself a couple of pieces of Mylar. It's a little expensive, but nothing sticks to it, I m ...

    Re: waste wood recycling and processing
    A message posted at WOODWEB's Value Added Wood Processing Forum (5/24) -- If you have a wood grinder to make a uniform chip, you can blow or auger al ...

    Re: Pocket Door Frustrations
    A message posted at WOODWEB's Cabinetmaking Forum (4/24/25) -- Have used both the Accuride 1432 cable system and Accuride 1234 with follower strip wi ...

    Re: New to finish dept
    A message posted at WOODWEB's Finishing Forum (4/24/25) -- Hello Will, hopefully as you learn more and gain experience you will get better at finishi ...

    Re: Weinig moulders
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24/25) -- Hey there! Congrats on completing the trans swap on your Bel Air. The issu ...

    Re: Composite lumber staples? Non-pneumatic?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/24/25) -- We have the Raptor system. Note that while the staples are "softer" t ...

    Re: White Cedar for furniture making
    A message posted at WOODWEB's Furniture Making Forum (4/24/25) -- None of the common pines “damage” machines either. Southern yellow pine is harder, ...

    Re: What going on with this white oak
    A message posted at WOODWEB's Forestry Forum (4/24/25) -- Those scars were probably made by a woodpecker. They’re after the insect larvae living unde ...

    Re: Where there's smoke...
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24/25) -- Glad that everything's fine! ...

    Re: Maple Burl Veneer Table Tops
    A message posted at WOODWEB's Veneer Forum (4/24/24) -- I haven't tried rosin paper but I would not use it based on the fact that it is intended to b ...

    Re: Bleaching walnut
    A message posted at WOODWEB's Finishing Forum (4/24/24) -- I have bleached walnut on quite a few jobs. Ive used the two part bleach. As far as contro ...

    Re: Bleaching walnut
    A message posted at WOODWEB's Finishing Forum (4/24/24) -- I made this walnut table and used a 2 part bleach on it. It was pretty easy to do, but as ...

    Re: Maple Burl Veneer Table Tops
    A message posted at WOODWEB's Veneer Forum (4/24/24) -- I found this: https://www.amazon.com/PerkHomy-Wrapping-Bulletin-Shipping-Covering/dp/B0 CQZ1T ...

    Re: Trying to expand our tambour sales
    A message posted at WOODWEB's Business and Management Forum (4/24/24) -- rich, We currently sell to just one customer, who was at that show in vegas ...

    Re: Trying to expand our tambour sales
    A message posted at WOODWEB's Business and Management Forum (4/24/24) -- Rich you're a year or two late with that comment. Tambour is the new "i ...

    Re: White powder by drying white oak lumber
    A message posted at WOODWEB's Sawing and Drying Forum (4/24/24) -- The white chalky powder you're seeing near the piles of fresh milled white oak mus ...

    Re: Maple Burl Veneer Table Tops
    A message posted at WOODWEB's Veneer Forum (4/24/24) -- Rich C- Do you think butt joints would be better than miters for the white oak frame? All ove ...

    Bleaching walnut
    A message posted at WOODWEB's Finishing Forum (4/24/24) -- I've got a project where the client's designer is asking us to bleach walnut. Its a large ...

    Re: Raised Panel End Grain Too Dark
    A message posted at WOODWEB's Finishing Forum (4/24/24) -- As Leo mentioned you typically sand the end grain finer. This can work pretty well with ha ...

    Re: Forest Health Criteria
    A message posted at WOODWEB's Forestry Forum (4/24/24) -- Checking with the US Forest Service, international forest services, and history departments ...

    Re: Staining poplar
    A message posted at WOODWEB's Finishing Forum (4/24/24) -- Look at gel stains. You may have to mix a few colors to get where you want. The beauty wit ...

    Re: Alpha CAM 2021
    A message posted at WOODWEB's CNC Forum (4/24/24) -- It's frustrating when software updates come with hefty fees, especially after already investing ...

    Re: Bleaching walnut
    A message posted at WOODWEB's Finishing Forum (4/24/24) -- The lack of control will only matter depending on how light they want to get the wood. A n ...

    Re: Bleaching walnut
    A message posted at WOODWEB's Finishing Forum (4/24/24) -- I use a 2 part wood bleach. There is no name on the box. I get from a really good local pa ...

    Re: Bleaching walnut
    A message posted at WOODWEB's Finishing Forum (4/24/24) -- thanks...its all new material...the lack of control is the concern I have. Appreciate the ...

    Re: Bleaching walnut
    A message posted at WOODWEB's Finishing Forum (4/24/24) -- thanks and do you have a favorite brand of bleach ...

    Re: Bleaching walnut
    A message posted at WOODWEB's Finishing Forum (4/24/24) -- thanks Duster ...

    Re: Bleaching walnut
    A message posted at WOODWEB's Finishing Forum (4/24/24) -- thnx ...

    Re: Large custom knife for 5"Tx3"D arched heavy crown moulding? Laguna SSII
    A message posted at WOODWEB's CNC Forum (4/24/23) -- Okay, now that I'm back at work, I was able to take a picture of the moulding I was referring to ...

    Carbide planer knife inserts
    A message posted at WOODWEB's Solid Wood Machining Forum (4/24/23) -- I have a whitney s 970 double planet with wesson heads. I'm having trouble loca ...

    Re: Painted exterior wooden treads
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24/22) -- Matt, We have used different paintable repellants over the years. Used to ...

    red gum
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24/22) -- We have a federal contract to exactly duplicate quite a bit of cabinet wor ...

    Re: dovetail bits
    A message posted at WOODWEB's Cabinetmaking Forum (4/24/22) -- At one time I was getting a Omec A23 750 bit from a place called Akhurst. Doesn't look ...

    CV not curing properly over bleached Oak.
    A message posted at WOODWEB's Finishing Forum (4/24/22) -- Like the title says, I'm finishing a dining set in Oak that has been completely bleached w ...

    Re: dovetail bits
    A message posted at WOODWEB's Cabinetmaking Forum (4/24/22) -- Which looks similar to the Cantek. I use a two flute solid carbide from Cantek. I pitc ...

    Saltwater aquarium hoods and bases
    A message posted at WOODWEB's Finishing Forum (4/24/22) -- We have been building aquarium stands and hoods for a while. A larger company wants us to ...

    Re: Painted exterior wooden treads
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24/22) -- Matt Calnen, Try going on Weather Spark. I searched Lake Michigan Beach, M ...

    Re: red gum
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24/22) -- Not sure where in Tennessee you are located, but Rick Hearne of Hearne Har ...

    Re: Ironwood planer reviews
    A message posted at WOODWEB's Solid Wood Machining Forum (4/24/22) -- The spindle speed of the CNC lathe is determined according to the material of t ...

    Re: beam saw + point to point vs. nested CNC
    A message posted at WOODWEB's CNC Forum (4/24) -- I have run both set ups and currently running a new Anderson 5x10 nested base machine. Beam saw tak ...

    Re: Cabinet backs and box construction
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- 1/4 backs with 1/2 IPB nailer dado in to top bottom and sides 9/16 back . I did as cabine ...

    bugs
    A message posted at WOODWEB's Sawing and Drying Forum (4/24) -- I have been milling full time for over 10 years and seem to be getting a larger bug p ...

    Re: Hydrocote Amber Additive with Sayerlack?
    A message posted at WOODWEB's Finishing Forum (4/24) -- phil, i'm yet to use magnamax on any casework - my partner used it on some a while back, and ...

    Making it super easy to load panels on CNC for cheap
    A message posted at WOODWEB's CNC Forum (4/24) -- Due to fire in an adjacent shop we had to move to a temporary location and buy a different router. ...

    Re: Edgebanders
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- I've had glue pot benders, Cehisa and SCMI and a HolzHer for the last 15 years or so. I m ...

    Re: Making it super easy to load panels on CNC for cheap
    A message posted at WOODWEB's CNC Forum (4/24) -- very cool and simple solution! Thanks for sharing. ...

    Re: 5 axis for nesting
    A message posted at WOODWEB's CNC Forum (4/24) -- Our 5 axis spindle rotates and changes angles while it is cutting, its also a magnetic connection s ...

    Re: Single phase industrial unit
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/24) -- Hi Dustin. Here is some additional details. My Timesaver is on a ...

    Re: Single phase industrial unit
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/24) -- Are you running your 53" time-saver on single phase? If not ...

    Re: Sharpening a chisel.
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24) -- I second the paper wheel sharpening. I laminated 2 pieces of MDF together, th ...

    Re: keeping your workforce safe
    A message posted at WOODWEB's Business and Management Forum (4/24) -- We are considerd essential here in south florida. i have 4 employees and 5200sq ...

    Re: Single phase industrial unit
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/24) -- Look up extrema machine, under the typhoon brand they have a cycl ...

    Kremlin cleaning advice
    A message posted at WOODWEB's Finishing Forum (4/24) -- Looking for best and fastest method for cleaning my kremlin as well as my gravity feed when u ...

    Re: Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/24) -- Thanks for sharing your story. Nothing like a horse's mouth, even from 6' away. ...

    Re: Help with water base finishes
    A message posted at WOODWEB's Finishing Forum (4/24) -- I've been using Chemcraft AquaPrime, Aqualux and Aquaset for the last year and a half for WB ...

    Re: hot air bander choices
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- there are some small glue pot machines for a little over 2500.00, made by makisa or somet ...

    Re: Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/24) -- With the new anti-body testing it's going to show a lot more people have had th ...

    Re: Kremlin cleaning advice
    A message posted at WOODWEB's Finishing Forum (4/24) -- I have been using Citra Clean concentrate degreaser. It comes in 1 gallon containers and pric ...

    Re: Pump size
    A message posted at WOODWEB's Finishing Forum (4/24) -- Herb I totally disagree but I'm talking about my Kremlin AAA pumps. The pump is all SS and th ...

    Help with water base finishes
    A message posted at WOODWEB's Finishing Forum (4/24) -- I am moving from solvent conversion varnish to water borne and need advice. I am looking at 2 ...

    Re: planked table top
    A message posted at WOODWEB's Furniture Making Forum (4/24) -- A table made this way needs a cross grain section like breadboard ends, steel, etc to ...

    Re: Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/24) -- Thanks for the report Anom, I'm glad that you are doing better. But the fact is ...

    Re: Pump size
    A message posted at WOODWEB's Finishing Forum (4/24) -- absolutely not leave it wet, with wb, water and acetone mix or mix of water and acrastrip wb ...

    Dying pva
    A message posted at WOODWEB's Adhesives Forum (4/24) -- I would to color pva adhesive a dark brown-black color for reclaimed wood laminations. I am u ...

    Re: Kremlin cleaning advice
    A message posted at WOODWEB's Finishing Forum (4/24) -- plain and simple go with acra strip best wb clean out there in the market good luck herb j ...

    Re: Dying pva
    A message posted at WOODWEB's Adhesives Forum (4/24) -- You can dye PVA with no problem. There are a number of appropriate dyes at www.veneersupplies ...

    Re: Pump size
    A message posted at WOODWEB's Finishing Forum (4/24) -- Leave the pump empty after cleaning out the WB finish ...

    Re: Pump size
    A message posted at WOODWEB's Finishing Forum (4/24) -- I'm with Herb on this; leave the fluid lines wet. ...

    Re: Kremlin cleaning advice
    A message posted at WOODWEB's Finishing Forum (4/24) -- Thank you both, Jim ...

    Re: The white cabinet trend recipe
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- Prefinished Maple!!! The labor to paint the inside of cabinets is way too much. We have b ...

    trimming router for Holzher Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- Please help, anybody... We recently purchased a used Holzher CP/B Quick 1432 Edgebander a ...

    Re: Exterior Jamb& Threshold Detail?
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24) -- tb - Yes, I wondered when or if that would ever come up. It hasn't. We do mor ...

    Re: Exterior Jamb& Threshold Detail?
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24) -- I do my epoxy and finish alittle different so you don’t have it “chip” as Dav ...

    Re: Stretch wrap
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- We used to go through a ton of shrink wrap. Drove me nuts how much would get put on stuff ...

    Re: chip load guidelines
    A message posted at WOODWEB's CNC Forum (4/24) -- We've tried quite a variety of bits over the years. We've been using Onsrud's Marathon coated bits ...

    Finishing birch credenza
    A message posted at WOODWEB's Finishing Forum (4/24) -- I am finishing a large birch credenza. Have heard about blotching with this wood. I would lik ...

    Re: Blumotion Undermount Slides Not Fitting Right
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- I think the runners have enough movement (slop) that they will move 2mm inward from the 3 ...

    Saber 408 2" acrylic furring problem
    A message posted at WOODWEB's CNC Forum (4/24) -- After cutting some letters (approx. 4" tall) out of 2" thick acrylic, we've noticed there ...

    Re: Software
    A message posted at WOODWEB's Business and Management Forum (4/24) -- Hello Richard, please check out our Software solution EZ-WinDoor which is desig ...

    Re: Sills
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/24) -- I always run a trim head screw or a dry wall screw up through the bot ...

    Re: trimming router for Holzher Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- We used Eurton Electric in California to repair an obsolete Holzher Trimmer for us. https ...

    Re: The white cabinet trend recipe
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- If you do what Ryan said, leave the backs off then paint, then put backs on. Much easier ...

    Re: trimming router for Holzher Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- I would contact Pettit Technical Service. They will either know how to fit it or have a u ...

    Re: First Coat with Agualente, then a Latex Paint Topcoat?
    A message posted at WOODWEB's Finishing Forum (4/24) -- Good Morning Dan ! You can do this, there is no problem. Just sand between coats Have a nice ...

    Re: kremlin MRX airmix tip
    A message posted at WOODWEB's Finishing Forum (4/24) -- Try Steve Weeks at M & K International. 770/725/8405. I purchase all my Kremlin items her ...

    Re: Saber 408 2" acrylic furring problem
    A message posted at WOODWEB's CNC Forum (4/24) -- Tool? Speed? Feed? How many passes? ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- Are you running flush interiors on your face frame cabinets? We run flush interiors most ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/24) -- You can 'take the moral high ground' (nose in air.....) and fix it/pay it and m ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- The biggest problem I have found with the Kreg system is twofold. The one being the above ...

    Alphacam/Cabinet Vision/Onsrud Router
    A message posted at WOODWEB's CNC Forum (4/24) -- Ive recently moved into a company with all three of these tools, which has a very limited understan ...

    Another feeds and speeds question
    A message posted at WOODWEB's CNC Forum (4/24) -- I typically use manuf. recommendations for RPM and feed rate on a per bit and per material basis. I ...

    Re: Alphacam/Cabinet Vision/Onsrud Router
    A message posted at WOODWEB's CNC Forum (4/24) -- Obvious answer, but what about Vero themselves? I've gotten training online and it is fantastic. We ...

    MLC Magnamax H2O Precat Water Borne Poly
    A message posted at WOODWEB's Finishing Forum (4/24) -- I have sprayed with waterborne finishes for over 10 years. I currently use MLC Agualente Plus ...

    Re: Another feeds and speeds question
    A message posted at WOODWEB's CNC Forum (4/24) -- I was using a chipload of .02 for MDF. So, a harder material would use a smaller chipload? This beg ...

    Re: Hardware Management: Nomenclature Improvement
    A message posted at WOODWEB's Business and Management Forum (4/24) -- Cwwoodworking, Are you in the USA? If so, unless you have an account with Häfel ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- I think I need a better clamp than their vise grip thing that goes in the pocket hole. Th ...

    Re: Another feeds and speeds question
    A message posted at WOODWEB's CNC Forum (4/24) -- How may passes? How thick material? Vacuum and chip/dust evacuation are the limiting factors. What ...

    Re: SAYERLACK Hydroplus AF71 VS Valspar WB C.V
    A message posted at WOODWEB's Finishing Forum (4/24) -- I spray Sayerlack on a daily basis through an automated spray line, and also out of pressure ...

    What Are The Benefits Of Flat Bottom Tools?
    A message posted at WOODWEB's CNC Forum (4/24) -- Here’s a list of reasons why we would suggest it to you as well: 1) Lower Machining Costs 2) They a ...

    Re: HMT laminating system problems
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/24) -- Kyle, I would like to speak with you about this machine. Our company als ...

    Re: Another feeds and speeds question
    A message posted at WOODWEB's CNC Forum (4/24) -- 3/4" material in 1 pass. Compression bit. Need to look at the specific dust. On another materi ...

    Re: Black filler
    A message posted at WOODWEB's Finishing Forum (4/24) -- Grab some water-based wood filler from your local big box store and mix some lamp black color ...

    Re: Kremlin tip selection for waterborne Chemcraft?
    A message posted at WOODWEB's Finishing Forum (4/24) -- I like Shane's response. Sheering will also effect the sheen level. 06 tip is not the answer. ...

    RoughSawn
    A message posted at WOODWEB's Solid Wood Machining Forum (4/24) -- Anyone have any luck duplicating rough sawn texture on material without a giant sa ...

    Re: Kremlin tip selection for waterborne Chemcraft?
    A message posted at WOODWEB's Finishing Forum (4/24) -- We are getting some new tips on Shanes advice, but $45 is a deal. We pay $125-130 for tips so ...

    Re: Another feeds and speeds question
    A message posted at WOODWEB's CNC Forum (4/24) -- It's all about chip load. For your material I would start at .015 to .018 chip load. For the tool y ...

    Re: Another feeds and speeds question
    A message posted at WOODWEB's CNC Forum (4/24) -- I think ,doesn't burn my hand is not a good test. Our main nesting bit after cutting sheets of 3/4 ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- These are what I have. https://www.amazon.com/gp/product/B01LBK1GHI/ref oh_aui_detailpage ...

    Re: Trying to locate this drill bit
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- Pricey to say the least was my thought. I about died when I saw 30 bucks a bit but if you ...

    Re: Import dxf into Alphacam
    A message posted at WOODWEB's CAD Forum (4/24) -- Thanks for all the responses. In some cases saving as R12 worked. What is the difference between an ...

    Black filler
    A message posted at WOODWEB's Finishing Forum (4/24) -- I'm staining maple with aniline day and I wonder if someone know if there is a black filler f ...

    Re: Cope and stick question
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- Kevin what is the Freeborn part numbers so I can look them up. i might be interested. Tha ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- This is the kinda clamp that I use, I was saying that I like the vise grip version better ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- You can adjust the pocket depth to have a clearance hole in the pocketed piece. ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- What is they best type of clamp to use for making cabinet face frames? ...

    cabinet fixings
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- Trying to take a long panel off which attaches to 4 cupboards holding them all together. ...

    Re: Attaching 1/4" thick lumber to MDF edges
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- Terrific comments. Thanks everyone! ...

    Onsrud Routers
    A message posted at WOODWEB's CNC Forum (4/24) -- Does anyone know if there is an option for Onsrud that works like Woodwop for Weeke? ...

    Re: Onsrud Routers
    A message posted at WOODWEB's CNC Forum (4/24) -- No idea what you are asking. Guessing.....conversational programming? ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- See if this link works. ...

    Re: Cope and stick question
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- F27972 ...

    Spray booth calculations
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/24) -- Fan and motor requirement I have a simply paint booth that requir ...

    Re: job dragging out client holding up completion
    A message posted at WOODWEB's Business and Management Forum (4/24) -- Chipbored, If you have 99% of the money and they are dragging out the completio ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24) -- Paul - I understand your point about the CNC. If you like to do it that way, ...

    Glues for Wood Veneer lamination in hot press
    A message posted at WOODWEB's Adhesives Forum (4/24) -- Hi all, I have been producing doors for sometime now and have been using a standard PVA for a ...

    Re: Thicknessing glue-ups: planer vs. wide-belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (4/24) -- I'm not discounting the value of a large planer, but if short term finances are a ...

    microwaving prong tests???
    A message posted at WOODWEB's Sawing and Drying Forum (4/24) -- I've met with you on several occasions and you've mentioned that, to eliminate the mo ...

    Re: Thicknessing glue-ups: planer vs. wide-belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (4/24) -- Thank you both (Pete D and Hen Bob) for the suggestions. Immensely helpful. Pete D ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24) -- Dave, Please don't take any offense at my comment. I am 67 years old and I ha ...

    Re: Matching Dyed Veener--working with Dye stains
    A message posted at WOODWEB's Finishing Forum (4/24) -- FYI... that's a very hard match... we often use that tabu on commercial millwork and I regula ...

    Re: job dragging out client holding up completion
    A message posted at WOODWEB's Business and Management Forum (4/24) -- You could write them a very nice letter explaining that if they don't care abou ...

    Re: HSD replacement shafts
    A message posted at WOODWEB's CNC Forum (4/24) -- The folks at HSD in Hollywood, FL are always helpful on the phone. I'd call and speak with them if ...

    Matching Dyed Veener--working with Dye stains
    A message posted at WOODWEB's Finishing Forum (4/24) -- Hello guys. Got a client that wants me to match a Dyed gray veneer from Tabu. These veneers a ...

      ---   Return to Top   ---   View More Results