• Knowledge Base Search Results: 63
  • Forum Messages Search Results: 2916
    • Your search for woodweb found 92671 documents (of 103265 searched).
    45001-48000 of the 92671 results are displayed below.
      


    Knowledge Base Results:

    Starting Out in a Garage
    Business owners weigh in on the question, "Can I bootstrap a woodworking business out of my garage?" January 2, 2014

    Spray Shop Layout
    Setting up an efficient spray-finishing area in an expanded shop. December 26, 2004

    Shopping for a Spraygun Upgrade
    A finisher looks to step up from low-end spray equipment, and gets advice on gun types. May 17, 2005

    Turbines Versus Compressors for Spraying On Site
    Finishers discuss their experiences with different setups for on-site finishing work. October 26, 2013

    Advice for a Beginning Finisher
    Pros counsel a cabinetmaker on how to get started applying spray finishes to his own work. April 19, 2006

    Spraying Waterborne Alkyd Paint
    Thinning issues are problematic with some paints and some equipment. November 29, 2014

    Rénovation des bancs d'église anciens
    Réflexions sur la façon de déterminer la finition d'origine de certains bancs d'église et de les rénover avec une formule compatible. 13 février 2009

    Milling Timbers to Minimize Warp
    Either "box the heart," or stay away from the pith altogether. March 16, 2015

    Yellowing Paint on New Poplar Doors
    This long discussion deals partly with the performance of paint on poplar, and partly with the division of responsibility between the cabinetmaker and the finisher. January 24, 2014

    Glazing Advice for a High-Volume Shop
    Pros give tips on formulating glazes, simplifying the process, and pacing the work. March 18, 2005

    Problems spraying conversion varnish
    Troubleshooting cleanup and viscosity/load problems. September 2, 2002

    Toner for a Poplar Cabinet
    A customer changes her mind, and a cabinetmaker needs to apply a stain finish instead of paint — to a poplar cabinet. Pros chime in with detailed recommendations and explanations for a very challenging toner application. May 17, 2005

    Troubleshooting Adhesion Failure in Conversion Varnish Over Lacquer
    Conversion varnish needs a mechanical bond. Here, pros analyze a case where it's not sticking. May 17, 2005

    No-blotch dying
    Methods to achieve uniform finishes. March 5, 2003

    Wrinkles in Lacquer
    Recoat window? Catalyzation? What could be causing this defect? December 9, 2004

    Distressing Wood
    Learning how to give new furniture that well-worn look. January 6, 2005

    Wrinkled lacquer over glaze
    The products and processes that could be causing this problem. August 29, 2001

    Staining and Blending Difficult Woods -- Alder, Birch, Maple, Poplar, and...
    A three step coloring technique to achieve rich, dark, even coloring on a variety of wood species - March 16, 2005

    Installing Rollout Shelves
    Keeping rollouts clear of the hinges. March 14, 2004

    Troubleshooting Rough Veneer on Furniture
    An extended discussion of the adhesive, veneering or finish issues that could create roughness on veneered pieces after some time in service. June 11, 2014

    Advice on Conversion Varnish
    A beginner gets tips on product choices, application techniques, and conditioning the workspace. March 18, 2005

    Oil finish with airless equipment
    Technique and tools to achieve excellent results. May 22, 2002

    Coating Choices for Exterior Wood Doors
    Here's another discussion sorting through the options for wood door finishes that have to face exterior exposures. March 28, 2012

    Reducing finish overspray
    Methods, additives and equipment for minimizing this problem. October 30, 2002

    Fair Wage for a Color Matching Specialist
    What's fair pay for a worker who's skilled and experienced at formulating a finish to match existing? January 4, 2014

    Using Waterborne Finishes
    How do waterborne finishes measure up, in practical use? September 9, 2004

    Refinishing contamination problem
    Is contamination at fault for the appearance of fisheye when refinishing furniture? August 29, 2001

    Make-your-own stains and glazes
    Mixing your own wiping stains and glazes. June 24, 2001

    Square-Foot Pricing for Volume Work
    When a potential customer suggests a low-ball price for a volume job, finishers chime in with information about the realistic costs of such a project. May 27, 2014

    Toning with conversion varnish
    Adding tonal depth without building up too much finish. August 13, 2002

    Paint Cracks in Five-Piece Doors
    Some cracking is pretty much inevitable when you paint five-piece wood cabinet doors. September 25, 2014

    Conversion Varnish and Sanding Sealer
    Advice on switching to a clear conversion varnish over a vinyl sanding sealer for a simple, quick two-coat system. April 15, 2013

    Sprayer Comparison: AAA Versus HVLP
    Experts discuss the quality, efficiency, and cost issues for air-assisted airless and high-velocity low-pressure technologies. March 18, 2005

    Building Up Color on Maple
    A builder gets advice on how to apply tinted stains and sealers to maple using many thin coats, to avoid the dreaded blotching effect. February 14, 2006

    Réparer une finition fisheye
    Résolution des problèmes d'effet fisheye dans une couche de finition de vernis de conversion. 24 juin 2001

    Refinishing Chairs Attacked by Cleaning Compound
    Murphy's Oil Soap can degrade some of the less durable finishes. Here's advice on cleaning and refinishing. March 16, 2015

    Mixing Your Own Toner
    Stain mixed with lacquer makes a good toner, but it takes practice. March 18, 2005

    Solvent Pop in Automotive Clearcoat
    Tiny round white specks on a guitar finished with automotive urethane are the result of solvent trying to evaporate, trapped under the fast-curing crosslinked skin. There's no fix now, but it can be prevented next time. December 8, 2006

    Applying glaze in tight spots
    Tips for achieving a consistent glaze application in tight places on raised-panel doors. June 24, 2001

    Why use water-based finish?
    With all the problems, why bother? April 17, 2002

    Fabricating Large-Scale Raised Panel Wainscoting
    A woodworker struggles with the practical difficulties involved in an outsize design concept. February 1, 2015

    Recreating a pine patina
    Mixing just the right color to match an old finish. October 2, 2001

    Lacquer Thinner Price Versus Quality
    When lacquer thinner prices are rising, buyers look for better bargains. But are the lower-priced options reliable? July 7, 2005

    Opaque Finish Choices
    Finishers discuss their preferred opaque finish products. February 15, 2015

    Dyes and Wash Coats
    Conditioning "naturally blotchy" woods to accept stains and dye uniformly. February 26, 2005

    Micro-Bubbles with an Air-Assisted Airless
    Compared to a cup gun, an AAA spraygun might shear the fluid and introduce gas that creates tiny bubbles in the wet coat. Here are some suggested work-arounds. April 19, 2011

    Post-cat lacquer vs. conversion varnish
    What is the difference between these two finishes? July 24, 2002

    Painting MDF Cabinet Doors
    Some finishes raise the fibers on MDF (especially at machined profiles), creating sanding and recoat headaches. Here's advice on minimizing the problem. October 19, 2014

    Painting wood cabinets
    Suggested paint-grade materials for cabinets. October 15, 2001

    Learning the Art of Color Matching
    Old hands give a newcomer some advice on how to train himself to match finish colors. October 19, 2005

    Distressing and Staining Alder
    Thoughts about how to make alder wood cabinets look beat-up and funky. May 17, 2005

    Soft, "Buttery"-Feeling Finishes
    How do commercial cabinet companies achieve the pleasing tactile surface feeling some finishes seem to have? April 18, 2015

    Custom Stain-Mixing Systems
    Various ways to formulate your own stains — any color you like. February 13, 2006

    Opaque Finishes Applied Indoors on Site
    It takes a lot of masking, but you can spray opaque finishes on built-ins after they're installed. October 19, 2013

    Supporting Doors for Spray Finishing
    More tips on how to sit, stand, rack or stack cabinet doors while spraying them. April 21, 2007

    Spraying White Conversion Varnish
    Advice on priming and other quality control measures for spraying white pigmented CV. August 12, 2014

    Waterborne Dye over Oil Stain
    A finisher gets advice on an unusual schedule: applying waterborne dye over a coat of oil-based stain. December 28, 2014

    Durable Topcoats for Pigmented Lacquer
    Finishers discuss using a clear topcoat over a pigmented lacquer, and give other suggestions for durable pigmented cabinet finishes. July 24, 2006

    Commercial Bar Top Finish Choices
    Finishers suggest a couple of options for a tough and repairable bar top coating. February 21, 2011

    Spray-Applied Coatings for Outdoor Metal Furniture
    A finisher shops for a paint he can buy in volume to apply to outdoor metal restaurant tables and chairs using spray equipment. November 29, 2014

    Surface Feel of Spray-Applied Acrylic Paint
    Pigment characteristics and a rapid dry time seem to affect the surface smoothness of paint. March 12, 2015

    Obscuring Grain and Figure
    Basic advice on finishing wood so that what's underneath doesn't show. June 22, 2012

    Taking a Red Undertone from Alder
    Green is the opposite of red on the color wheel, but some fine fiddling with yellow and blue may be needed to balance out a too-red tone. September 26, 2013

      ---   Return to Top   ---   View More Results   


    Forum Results:

    Re: threaded rod table legs-Hardware
    A message posted at WOODWEB's Furniture Making Forum (2/18) -- Hi Dennis check our RAMPA's products they have many options for your application. www. ...

    Re: Knock down bed hardware
    A message posted at WOODWEB's Furniture Making Forum (2/18) -- Hi Brad, Rampa would have a few options for you... www.rampa.com ...

    Re: Finish For Cedar Cabinets.
    A message posted at WOODWEB's Finishing Forum (2/18) -- Drop me an E Mail nss@mwt.net ...

    wook shrinkage calculator
    A message posted at WOODWEB's Sawing and Drying Forum (2/18) -- I entered the following information (See Below)in the calculator to determine how muc ...

    Re: Sliding Dovetail in Solid Material
    A message posted at WOODWEB's Furniture Making Forum (2/18) -- The reason everyone is recommending a sliding tapered dovetail is that getting a flawl ...

    Re: checks and flakes in white oak causing problems
    A message posted at WOODWEB's Furniture Making Forum (2/18) -- Thanks everyone for all of your responses. As it turns out, i have switched my vendor ...

    Re: desparately need a resaw solution
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- the other issue with a band (besides tension) is surface feet per minute. the opti ...

    jointer question
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- Has anyone purchased a new jointer table/cutter without any kind of stand or motor ...

    Re: jointer question
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- I've got a Jet JJ6 6" mounted to a wood table, pully drops down to a motor on ...

    Re: Laminating IPE
    A message posted at WOODWEB's Adhesives Forum (2/18) -- Good luck with that. You will need a fork lift to hang the thing. Epoxy resin works with ipe ...

    Re: Sliding Dovetail in Solid Material
    A message posted at WOODWEB's Furniture Making Forum (2/18) -- I'm starting to re-think this and am considering a half dovetail combined with a dado. ...

    Re: Is it possible to thermoforming with industrial heat blanket?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/18) -- what material, how large, how big is the "blanket" in a nut sh ...

    Re: Sliding Dovetail in Solid Material
    A message posted at WOODWEB's Furniture Making Forum (2/18) -- finewoodworking did an article on a tapered sliding dovetail a few years back. as I re ...

    Laminating IPE
    A message posted at WOODWEB's Adhesives Forum (2/18) -- I am making a IPE Entry Door. Does anyone have any suggestions on what glue/adhesive I should ...

    Re: Hitachi resaw blade sharpening
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- my local saw shop does bands but not sure about the carbide. the ones I see in the ...

    Hauncher
    A message posted at WOODWEB's Furniture Making Forum (2/18) -- I have a JKO Hauncher that I intend on using to cut box joints. I need help finding a ...

    Hitachi resaw blade sharpening
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- Does anyone know where I can get my 3" wide Hitachi carbide tipped resaw blad ...

    Re: jointer question
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- What is a table cutter? What kind - make, model - of jointer do you have? ...

    Re: Hitachi resaw blade sharpening
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- I checked with my sharpener and he is not set up to do it. ...

    Re: 3D CAD for Cabinet Design and Production
    A message posted at WOODWEB's CAD Forum (2/18) -- Hi Steve, Just wondering if you have an update for us? Richard ...

    Re: regarding veneer
    A message posted at WOODWEB's Veneer Forum (2/18) -- I once call the Glue Laboratory at Borden Adhesives and asked a scientist what would remove UF g ...

    Re: regarding veneer
    A message posted at WOODWEB's Veneer Forum (2/18) -- UF resins can be sanded and stained just like real wood. I also agree with Charles with regard t ...

    Re: regarding veneer
    A message posted at WOODWEB's Veneer Forum (2/18) -- first i would like to say thanks. i would be able to sand the surface of veneer but main attract ...

    Edge BandingA Painted Edge
    A message posted at WOODWEB's Adhesives Forum (2/18) -- Hi everyone! Have somebody done what im about to do. I have some 18mm painted chipboard panel ...

    Re: regarding veneer
    A message posted at WOODWEB's Veneer Forum (2/18) -- I forgot to mention that you can add shell flower (walnut or pecan) or even fine sawdust to your ...

    Re: EDGE BANDING A PAINTED EDGE
    A message posted at WOODWEB's Adhesives Forum (2/18) -- Yes, you need a fresh edge. cm ...

    Re: Green/Local Building
    A message posted at WOODWEB's Value Added Wood Processing Forum (2/18) -- We have attempted to appeal to customers with an interest in green and/or l ...

    Re: Green/Local Building
    A message posted at WOODWEB's Value Added Wood Processing Forum (2/18) -- I hope the biggest ad budget doesn't win the green battle because wood will ...

    Re: Crossroads
    A message posted at WOODWEB's Business and Management Forum (1/18/25) -- Depends on what your cash flow is. Working until you can't could happen tomo ...

    Re: 5 Ply Birch Indonesia Veneer Core 19mm / 3/4''
    A message posted at WOODWEB's Cabinetmaking Forum (1/18/25) -- I have been using 18mm Indonesian white birch for several years both unfinished and UV ...

    Re: Crossroads
    A message posted at WOODWEB's Business and Management Forum (1/18/25) -- Build it tomorrow. 32 years of rent would have made one heck of a nest egg. ...

    Re: Custom tinted edgebanding glue
    A message posted at WOODWEB's Adhesives Forum (1/18/25) -- DORUS KS 351 ...

    Re: Software question
    A message posted at WOODWEB's CNC Forum (1/18/24) -- If i had it to do over I would prob go mozaik investment is lot less, whith that being said i ha ...

    Housing Report - Virginia Tech - November 2023
    A message posted at WOODWEB's Business and Management Forum (1/18/24) -- From the report: "Housing data, year-over-year, were mixed. Month-over- ...

    Re: Shaper parts help
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18/24) -- If its just the cable thats broken you should be able to get it relatively easy ...

    Re: selling reclaime wood from old buildings
    A message posted at WOODWEB's Business and Management Forum (1/18/24) -- Thanks, everyone, for your responses. Suppose I ask often seeing articles ab ...

    Part organization cart Ideal's
    A message posted at WOODWEB's CNC Forum (1/18/24) -- We just recently added a cnc, Hoping someone would be willing to share some picture's of there c ...

    Re: Part organization cart Ideal's
    A message posted at WOODWEB's CNC Forum (1/18/24) -- Cabinets, jobs are usally 35- 60 cabinets . we cut cabinet boxe's drawer box's. backs .door pane ...

    Re: Part organization cart Ideal's
    A message posted at WOODWEB's CNC Forum (1/18/24) -- Do you cut all the cabinets at one time? I don’t know your operation but that might not make sen ...

    Re: Error code E6
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18/24) -- My manual says "Frequency changer 2 error message" I'd wager a v ...

    Error code E6
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18/24) -- On computer board what is error code E-6 for Brandt optimal KD 56 ...

    Re: Part organization cart Ideal's
    A message posted at WOODWEB's CNC Forum (1/18/24) -- What are you making? How many of those units are in a full nest? ...

    Re: Sanding MDF doors
    A message posted at WOODWEB's Cabinetmaking Forum (1/18/23) -- There are about as many methods as there are cabinet shops and it entirely depends on ...

    Manufacturing Wide Plank Flooring
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18/23) -- Does anyone want to manufacture and sell wide plank flooring from our facility ...

    Re: Architectural Wood Ceiling installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/18/23) -- Thanks for the feedback guys. Mechanically fastening through the f ...

    Re: Recommended hood insert
    A message posted at WOODWEB's Cabinetmaking Forum (1/18/23) -- It seems lately we’ve been getting the Wolf hood insert, they measure around 12”h x 19 ...

    Re: Scalloped cabinet faces??
    A message posted at WOODWEB's Cabinetmaking Forum (1/18/23) -- I did this one out of solid cherry. Had knifes made and ran the boards through a woodm ...

    Re: Finish Cracking On Hood Vent
    A message posted at WOODWEB's Finishing Forum (1/18/23) -- I agree with Bill. There is something wrong with that piece of material. The rest of the h ...

    Raffix connectors for closet
    A message posted at WOODWEB's Cabinetmaking Forum (1/18/23) -- Has anyone used the Raffix connector that just wedges into side panel pin but does not ...

    Re: Architectural Wood Ceiling installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/18/23) -- Have had success with these in the past. star zero 510 ceiling cli ...

    Re: Scalloped cabinet faces??
    A message posted at WOODWEB's Cabinetmaking Forum (1/18/23) -- I am doing two radius face vanitys the same way next week ! Vcarve / Aspire is excelle ...

    RE: Machines for Manufacturing Flooring
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18/23) -- Which flooring machine is best for manufacturing raw wood to wide plank floorin ...

    Re: Veneer bubbles - wrong glue or something else?
    A message posted at WOODWEB's Adhesives Forum (1/18/23) -- Thank you Tom & Dave, this info was helpful! ...

    Re: Finish Cracking On Hood Vent
    A message posted at WOODWEB's Finishing Forum (1/18/23) -- i would blame the pig. ...

    Re: Help with a Graco AAA
    A message posted at WOODWEB's Finishing Forum (1/18/22) -- I just had a spraying session today Spraying MLC white vinyl primer I think I need to take ...

    Re: Help with a Graco AAA
    A message posted at WOODWEB's Finishing Forum (1/18/22) -- your pump sounds like it is double stroking, or skipping. most likely, the common cause is ...

    drawer slide shortage
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/18/22) -- Anyone else feeling the frustration of Blum's tandem plus drawer s ...

    Floating Vanity
    A message posted at WOODWEB's Cabinetmaking Forum (1/18/22) -- What do you do to for support of granite tops on floating vanities? In the past I have ...

    Re: drawer slide shortage
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/18/22) -- Absolutely!! Over 1000 pair on backorder since August. They seem t ...

    Re: Tall Bookcase Assembly Options
    A message posted at WOODWEB's Cabinetmaking Forum (1/18/22) -- I typically do bookshelves as single vertical sections sitting atop a ladder frame toe ...

    Re: cabinetware
    A message posted at WOODWEB's CAD Forum (1/18/22) -- Brett, back when we used CW, I didn't use the multidraw feature, but you should be able to print ...

    Re: Floating Vanity
    A message posted at WOODWEB's Cabinetmaking Forum (1/18/22) -- https://www.richelieu.com/us/en/category/furniture-equipment/wall-shelf-supports/s hel ...

    Re: Floating Vanity
    A message posted at WOODWEB's Cabinetmaking Forum (1/18/22) -- Mike - that's interesting, thanks. So it looks like you bolt it to the right side of t ...

    Re: Salice drawer runners
    A message posted at WOODWEB's Cabinetmaking Forum (1/18/22) -- I am also in the market for undermount soft close drawer slides. I've been using Blum ...

    Re: The Closet Doctor 3.0 new shop
    A message posted at WOODWEB's Business and Management Forum (1/18/22) -- New update Also a link in description to another video I made on airlines ...

    Re: Floating Vanity
    A message posted at WOODWEB's Cabinetmaking Forum (1/18/22) -- Couple of different option from this website. ...

    Re: cabinetware
    A message posted at WOODWEB's CAD Forum (1/18/22) -- I always print as a pdf then email the pdf. ...

    Re: Cnc technology
    A message posted at WOODWEB's CNC Forum (1/18) -- I am a former Tech for a machine manufacturer. The best piece of advice I ever received was, " ...

    finish bleed through
    A message posted at WOODWEB's Finishing Forum (1/18) -- i recently was part of a small kitchen refinishing project. I moved a few cabinets and my fin ...

    Re: mdf interior door
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- I have turned down many an MDF job. I simply will not work with the stuff bey ...

    Re: Vectric software
    A message posted at WOODWEB's CAD Forum (1/18) -- You have other options as well for 3D files. If you are already running sketchup(pro) you have the ...

    Re: wood movement
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- Bad design cannot be overcome by the statistical design parameters of the Shrinkulato ...

    Re: Drop down lid
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/18) -- Hi Mark, There would be no need for friction hinges with Pacta. All P ...

    Re: Learning Biesse CNC on the job
    A message posted at WOODWEB's CNC Forum (1/18) -- There is a biesse user forum on Facebook and lots of UK/European users, I'm sure one could be local ...

    Teak swim platform adhesive
    A message posted at WOODWEB's Adhesives Forum (1/18) -- Ok, I have read a lot, watched a lot and thought a lot. The conclusion is I am not sure? I ne ...

    MDF Door Finishing Final Coat
    A message posted at WOODWEB's Finishing Forum (1/18) -- New to door building. I am building doors for my laundry using MDF. Shaker Style. I have Benj ...

    Re: Removing oil from raw wood
    A message posted at WOODWEB's Finishing Forum (1/18) -- I used a piece of Mahogany for a top rail that had some oil in it. I noticed it, but it was s ...

    Re: mdf interior door
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- We did make the door I originally asked about out of thick mdf. Turned out gr ...

    Re: Cabmaster Software
    A message posted at WOODWEB's CAD Forum (1/18) -- Hello Tracy, I am dealer for CabMaster. I would be more than happy to answer any questions you have ...

    Best Cordless Pin Gun
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Wanted to check with the group because I'm trying to find out who makes the best cordless ...

    Drying 8/4 Slabs
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- i may be needing to dry a mixed load of live edge slabs. the speices mentioned to me ...

    Re: Using cordless drill for SQUARE MORTISING?
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- Simple improvements make a mortising attachment work great. Even though they' ...

    Re: wood movement
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- Top is 14ft long 60” wide in middle 40” on each end m/c 8% location southwest Us humi ...

    Re: Removing oil from raw wood
    A message posted at WOODWEB's Finishing Forum (1/18) -- David, I am working a little at a time cleaning the oil. It has taken some time but it seems ...

    Re: Teak swim platform adhesive
    A message posted at WOODWEB's Adhesives Forum (1/18) -- Resorcinol is the strongest glue on the planet. If you go to boatbuilders forums you will fin ...

    Re: Drawer Electrical Outlets
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- I like to make the top drawer a little less in height, then drill through the cabinet bul ...

    retrofit SCM
    A message posted at WOODWEB's CNC Forum (1/18) -- onther customer happy after full retrofit SCM with tool chnge drill head and horizontal driling,saw ...

    Re: Teak swim platform adhesive
    A message posted at WOODWEB's Adhesives Forum (1/18) -- Boats are built with epoxy for a reason - it works. Enlist the help of a local marine supply ...

    Re: Best Cordless Pin Gun
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- The Makita nail gun is terrible I have the Ryobi nail gun and Ryobi micronailer they have ...

    Re: Best Cordless Pin Gun
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- I have had a 18 gauge dewalt brad nailer for awhile now and so far it hasn't given any pr ...

    Re: Software
    A message posted at WOODWEB's CAD Forum (1/18) -- Robin This is a wine cellar that might be difficult with other programs ...

    Re: exterior wood choices for doors
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- Southern Live Oak was prized for its branching. The huge branches, low on the ...

    Re: Expanding table
    A message posted at WOODWEB's Furniture Making Forum (1/18) -- Is this your solution to a problem the people/space presents? Or is this something the ...

    Re: Overhead Costs
    A message posted at WOODWEB's Business and Management Forum (1/18) -- We track every dime. If we can buy edgebanding with free shipping, and it takes ...

    Re: moulder chip recirculation
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/18) -- Are you referring to what we call 'chipbeat' - where chips ride a ...

    Re: Metal Honeycomb door with Mirror 1 side
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- Fiber face. What exactly is that? Why metal honeycomb(aluminum)? There is Nom ...

    Trouble with Torsion box door
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- I am building some 7' X 10' X 1-3/4" flush doors using a torsion box des ...

    Re: Metal Honeycomb door with Mirror 1 side
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- Fiber face. What exactly is that? Why metal honeycomb(aluminum)? There is Nom ...

    Re: Revealing the wood
    A message posted at WOODWEB's Furniture Making Forum (1/18) -- Get lots of samples of smaller boards - as many species as you see in the racks. Learn ...

    Re: Trouble with Torsion box door
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- I built a number of large (up to 5.5' x 10') torsion box doors a few years ba ...

    Re: Trouble with Torsion box door
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- Yea. What that guy said It amazes me that people try to use poplar for projec ...

    Re: Revealing the wood
    A message posted at WOODWEB's Furniture Making Forum (1/18) -- Depending on how many and what species you are considering using, the one live edge sh ...

    Re: Metal Honeycomb door with Mirror 1 side
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- Can you incorporate some horizontal internal wood rails into the design? They ...

    Re: Lacquer over latex paint?
    A message posted at WOODWEB's Finishing Forum (1/18) -- Thanks everyone. I went with black lacquer primer and then black lacquer before the precat. I ...

    Re: Grizzly G0895?
    A message posted at WOODWEB's CNC Forum (1/18) -- I'm not impressed. Chinese junk. I'd go more with something like this, US built and the guy actuall ...

    Re: Cabnetware question
    A message posted at WOODWEB's CAD Forum (1/18) -- I now have a program that will change the default name that is burned on your security key. If you ...

    Re: Looking into buying a new Cnc
    A message posted at WOODWEB's CNC Forum (1/18) -- We run a Holzher pod and rail 5 axis, we had minor problems at first,but good machine overall. Most ...

    Re: Trouble with Torsion box door
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- The problem is the poplar grid work. Use maple instead and I think the proble ...

    Re: Lacquer over latex paint?
    A message posted at WOODWEB's Finishing Forum (1/18) -- They used to say you can put anything over lacquer but you can't put lacquer over anything. ...

    Re: High Solid vs Low Solid
    A message posted at WOODWEB's Finishing Forum (1/18) -- We are adding 25% to stealth. Any concerns ? Thanks ...

    Re: Holzher 1416 edgebander question
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- thanks for your help ...

    Re: damage by other trades after delivery
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- this happens ALL the time. We cover our cabinets and tops but all that does is gives the ...

    Re: Interior shaker doors
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- Scott, Let me quantify my response because I build tons of knotty alder doors ...

    Re: need new cv
    A message posted at WOODWEB's Finishing Forum (1/18) -- The SW formulations are one in the same..... Still coming out of Canada from Becker plant... ...

    Re: Carbide insert for raised panel cutter
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- I have sent it to great lakes already, I do believe that they were the ones to make the b ...

    Re: boring machine recommendation
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- We bore and dowel because we need hidden fasteners. We started with a Gannomat combinatio ...

    Re: Tips of production
    A message posted at WOODWEB's CNC Forum (1/18) -- How big is the piece in the last picture, how wide and how long. It is not that difficult to run on ...

    Re: Carbide insert for raised panel cutter
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- My tool sharpener is making inserts and trying to compete with the tool manufacturer pric ...

    Re: Chemlife24
    A message posted at WOODWEB's Finishing Forum (1/18) -- I have used Chemlife 24 White - Primer 522-2400 and it works fine. I have also used ML Campbe ...

    Re: boring machine recommendation
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- If you can swing it go for the auto drill/dowel inserter, we started with just a horizont ...

    Re: boring machine recommendation
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- I've been following this thread because I've been researching boring machines for a while ...

    Re: boring machine recommendation
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- I have a Maggi System 32 construction boring machine that I do all of my horizontal borin ...

    Re: Tips of production
    A message posted at WOODWEB's CNC Forum (1/18) -- That the problem i have multiple sizes in length and in width My cnc can handle till 4 m thats no p ...

    Re: Surfprep sanders
    A message posted at WOODWEB's Finishing Forum (1/18) -- i have 3x4 electric, it is real expensive, works well, you have to use correct grit to get sw ...

    Re: Mini Max jointer/planer motor problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18) -- Capacitor is blown and oil leaked out, install the same size and rock on. Worst ca ...

    Tips of production
    A message posted at WOODWEB's CNC Forum (1/18) -- Hi all hope your having a productive day I am facing a new kind of job i have to sonthing similar t ...

    Re: DWG templets for cabinet accessories
    A message posted at WOODWEB's CAD Forum (1/18) -- I use a pdf to cad converter (Print to cad) really in expensive, works great and is accurate. conve ...

    Re: Tips of production
    A message posted at WOODWEB's CNC Forum (1/18) -- Doesnt look to be anything overly complicated. Simple 2D tool paths and a bit with enough reach to ...

    Re: Biesse works & BSolid
    A message posted at WOODWEB's CNC Forum (1/18) -- some circles go jagged when importing drawings, which then leads to not being toolpathed properly. ...

    Re: Tips of production
    A message posted at WOODWEB's CNC Forum (1/18) -- Ah ok i understand What about work like that ...

    Re: Chinese CNC routers??
    A message posted at WOODWEB's CNC Forum (1/18) -- Chevy- You're correct if you or one of your employees is a technician then maybe a cheaper machine ...

    Re: Seriously purchasing two stager compressor for spraying
    A message posted at WOODWEB's Finishing Forum (1/18) -- no need for a two stage compressor, second stage only raises the pressure rating of the compr ...

    Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/18) -- We make solid wood tables in a variety of woods, Cherry being the most common by far. One of ...

    Re: Chinese CNC routers??
    A message posted at WOODWEB's CNC Forum (1/18) -- Robert, If you want search things made in China use Alibaba search engine. Like all machines you wo ...

    Re: Seriously purchasing two stager compressor for spraying
    A message posted at WOODWEB's Finishing Forum (1/18) -- Hello Mike for example Home Depot has a cast iron vertical belt drive A/c for around $800, sh ...

    Re: prefinished plywood
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Like all other plys, it comes in UV2, but yes the UV1 lays flat. When I run the next batc ...

    Sealing green wood (entire board)
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- Hello, I have a project which is utilizing manzanita and if you've worked with manzan ...

    Re: The best kept secret for small to medium size shops
    A message posted at WOODWEB's Business and Management Forum (1/18) -- I am very much looking forward to partipating! Besides what looks like a great ...

    Re: Seriously purchasing two stager compressor for spraying
    A message posted at WOODWEB's Finishing Forum (1/18) -- Bruce, the one from Lowes is the one I'm going to buy. I have two questions for you. Which of ...

    Re: Chinese CNC routers??
    A message posted at WOODWEB's CNC Forum (1/18) -- I completely disagree, most Cnc routers are the same layout, Servo, drives, and 3 axis ,,,why blow ...

    Re: Chinese CNC routers??
    A message posted at WOODWEB's CNC Forum (1/18) -- Not sure if this is relevant or not but: Many years ago a lot of tier one automotive suppliers star ...

    Anyone have an Extrema edge sander?
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Back to buying an edge sander (I posted a similar thread about 1 year ago). I'm having a ...

    Re: Seriously purchasing two stager compressor for spraying
    A message posted at WOODWEB's Finishing Forum (1/18) -- Bruce, I think the same time you went to Home Depot I went to Lowes. This is the one I was lo ...

    Re: Seriously purchasing two stager compressor for spraying
    A message posted at WOODWEB's Finishing Forum (1/18) -- The air usage for the Kremlin is 4 cfm max Rotary screw compressor are in a completely differ ...

    Re: Seriously purchasing two stager compressor for spraying
    A message posted at WOODWEB's Finishing Forum (1/18) -- I picked up my EOS 15 from my Sherwin Williams dealer (not to brag, but it was a screaming de ...

    Re: ilva diamante poly
    A message posted at WOODWEB's Finishing Forum (1/18) -- We Use This Product Over Polyester Sealer On Commercial Bar Tops And Never Had A Problem . Ve ...

    Re: looking for shops in NJ NY PA commercial work
    A message posted at WOODWEB's Business and Management Forum (1/18) -- Hi Bruce , My Name Is Bob O'Connell And I Own A Wood Finishing Shop In Vineland ...

    Re: Chinese CNC routers??
    A message posted at WOODWEB's CNC Forum (1/18) -- I'm no fan of buying on Alibaba. Be very careful about shipping costs and import duties. You'll nee ...

    Re: Hinge Screws for Aluminum Framed Doors
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Your best source would probably be to contact Element Design or EFI. They both manufactur ...

    Re: Inflow filter Kremlin 10-14
    A message posted at WOODWEB's Finishing Forum (1/18) -- We spray all solvent based. They make one exclusively for water borne. I have no experience w ...

    Re: Biesse routers , a good choice
    A message posted at WOODWEB's CNC Forum (1/18) -- Biesse service is spot on,,and when i worked there in 16,,,they really really stepped up,,,hiring o ...

    Re: Anyone have an Extrema edge sander?
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- I don't know anything about their edge sanders, but I have 2 of their ET-150 shapers. The ...

    Re: Inflow filter Kremlin 10-14
    A message posted at WOODWEB's Finishing Forum (1/18) -- I haven't used the pickup filter...ever. Got my Kremlin in 2009. I use the gun filter and the ...

    Re: Inflow filter Kremlin 10-14
    A message posted at WOODWEB's Finishing Forum (1/18) -- We replaced out plastic ones with a stainless on our CAT with oem from them. Don't know if th ...

    Re: Remote Alphacam Training
    A message posted at WOODWEB's CNC Forum (1/18) -- Matt,,,I made a bunch of videos for free and I can post them here for you for free,, if u need,,,ju ...

    Re: Inflow filter Kremlin 10-14
    A message posted at WOODWEB's Finishing Forum (1/18) -- Thank you Robb, I am getting ready to add a new AAA. What model CAT AAA do you have and how d ...

    Re: Seriously purchasing two stager compressor for spraying
    A message posted at WOODWEB's Finishing Forum (1/18) -- I'm located in Pennsylvania but with online shopping that does not matter. Thank you! ...

    Re: Seriously purchasing two stager compressor for spraying
    A message posted at WOODWEB's Finishing Forum (1/18) -- try schweitzer and crossom for kremlin. they are in horsham Pa. scspray.com ...

    Re: Seriously purchasing two stager compressor for spraying
    A message posted at WOODWEB's Finishing Forum (1/18) -- Bruce you said 8 cfm but at what PSI? I'm thinking 45 PSI to be safe. ...

    Re: Seriously purchasing two stager compressor for spraying
    A message posted at WOODWEB's Finishing Forum (1/18) -- Can anybody recommend a reliable company to purchase the Kremlin EOS? ...

    Re: Inflow filter Kremlin 10-14
    A message posted at WOODWEB's Finishing Forum (1/18) -- Hello Rob the Kremlin I presently use is the 15C25 is for WB product and solvent based produc ...

    Re: Chinese CNC routers??
    A message posted at WOODWEB's CNC Forum (1/18) -- Zack is 100% correct if you want 0 headaches,,,,but if your a mechanic type,,,then my way may be be ...

    Re: Hinge Screws for Aluminum Framed Doors
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Hafele #010.94.902, #7 x 1/2”, self tapping sheet metal screws ...

    Re: prefinished plywood
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- So that Garnica is only UV finished on 1 side and it still lays flat? ...

    Re: alphacam program
    A message posted at WOODWEB's CNC Forum (1/18) -- Post processors are super easy,,i can easily create a VBA post for you,,, Chevy ...

    Architectural CAD Library
    A message posted at WOODWEB's CAD Forum (1/18) -- Hi everyone, Any benefit is there for using Architectural CAD Library. ...

    Re: Inflow filter Kremlin 10-14
    A message posted at WOODWEB's Finishing Forum (1/18) -- Hello Rob why not just upgrade to the Kremlin 15C25? ...

    Re: Seriously purchasing two stager compressor for spraying
    A message posted at WOODWEB's Finishing Forum (1/18) -- where are you located. ...

    Re: Hinge Screws for Aluminum Framed Doors
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Thanks guys. ...

    Re: Upgrading to biesseworks
    A message posted at WOODWEB's CNC Forum (1/18) -- Biesse Rover 24,,,beautiful machine,,, Chevy ...

    Re: Sealing green wood (entire board)
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- No ...

    Re: Architectural CAD Library
    A message posted at WOODWEB's CAD Forum (1/18) -- googled. couldn't find. ...

    Re: cnc Services pricing
    A message posted at WOODWEB's CNC Forum (1/18) -- Nice work ...

    Re: Theft in the shop?
    A message posted at WOODWEB's Business and Management Forum (1/18) -- I don't know if this will help, but it might. A local business journal many yea ...

    Re: Increasing penetration of oil finishes
    A message posted at WOODWEB's Finishing Forum (1/18) -- Allan You may be quite right - we might already have maximized bringing out the inherent chat ...

    Re: kremlin 10;1 air assist
    A message posted at WOODWEB's Finishing Forum (1/18) -- if it has been run dry and not full of lube all the time you will be lucky to get by with jus ...

    Dust Collector Leaking Dust
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/18) -- I believe we have an old Murphy Rogers dust collector. Recently i ...

    Re: Rotary airlock on cyclone hopper?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/18) -- We've got a 12" rotary valve on our cyclone. It handles our ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/18) -- I put a mailbox together made from Sapele that was 3/8" thick. It was put together using ...

    Re: AutoCAD 3D
    A message posted at WOODWEB's CAD Forum (1/18) -- To the original question: AutoCAD is a robust 3d modeling platform and has been for a long time. He ...

    Re: Veneering a long countertop
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Planing a 14' piece of hard maple to 1/8" thickness will result in a LOT of waste. G ...

    Re: Need help evaluating my pay. Please help!
    A message posted at WOODWEB's Business and Management Forum (1/18) -- What did you do before you worked at this company? How many years experience do ...

    Re: Pay as you go Comp
    A message posted at WOODWEB's Business and Management Forum (1/18) -- We've been doing "pay as you go" comp for 7 years. It's through ADP a ...

    Re: STOCK FEEDER
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- The Western Roller setup is good. I've been having them send belts with the lugs removed ...

    Re: Joined cabinet seam
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Sam, are you asking about a joint where one face frame butts into the finished side of an ...

    Brandt Gluepot Issue
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- We keep getting little bits of 'crud' stuck on the glue gate of our gluepot, which It has ...

    Re: kremlin 10;1 air assist
    A message posted at WOODWEB's Finishing Forum (1/18) -- Thx bhand,that was my main question,yes its new,the xcite gun seems great,im just new with th ...

    Re: AutoCAD 3D
    A message posted at WOODWEB's CAD Forum (1/18) -- For molds, extrusions, machined parts, etc. I usually send out STEP ... not directly from AutoCAD a ...

    Recruiting My Employees
    A message posted at WOODWEB's Business and Management Forum (1/18) -- There is an architectural woodworking company that needs us to do some of their ...

    Re: kremlin 10;1 air assist
    A message posted at WOODWEB's Finishing Forum (1/18) -- Hello William have you always maintain lube level in the reservoir using the the Kremlin lube ...

    Re: Best wood for shower
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/18) -- My first response would be the new ceramic flooring that looks like w ...

    Re: AutoCAD 3D
    A message posted at WOODWEB's CAD Forum (1/18) -- For production Case work Cabinet Vision or Microvellum are the go to for popularity and probably ef ...

    Re: Brandt Gluepot Issue
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- I hadn't thought so, but possibly. The end trim units aren't housed for dust collection, ...

    Re: inlaying plastic laminate into tables with wood edges and the offset
    A message posted at WOODWEB's CNC Forum (1/18) -- So you're cutting a pocket for the laminate to set in? If that's the case I would get out the micro ...

    Re: AutoCAD 3D
    A message posted at WOODWEB's CAD Forum (1/18) -- It would be difficult in Auto Cad or Solid Works for that matter. My objection is when a new hire i ...

    Re: kremlin 10;1 air assist
    A message posted at WOODWEB's Finishing Forum (1/18) -- the paint company that sold it to us had to replace piston seal about a week after we bought ...

    Weinig Technician
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- Hello everyone. I'm new to this forum and I was hoping someone could help me ...

    Re: selling 3Form
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- The customer asked us to return to 3Form and what is the restocking fee, they ...

    Re: Cope and stick joint too tight?
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- As the knives wear, they will loose their tight fit. As others have noted its extremely r ...

    Re: Upcut saw accuracy
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- If I were to purchase a new upcut saw, I would take a look at the Northfield saws. I've u ...

    Re: Recruiting My Employees
    A message posted at WOODWEB's Business and Management Forum (1/18) -- How does accepting work increase the likelihood that they will recruit your emp ...

    Re: Brandt Gluepot Issue
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Have you always used the same glue? We used to use an inexpensive glue and we had similar ...

    Re: CNC machining chair bottoms
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18) -- Use? No. Buy? Maybe. If you need to pay a designer to do the 3d surfacing model fo ...

    Re: First cut on a straight line rip
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18) -- A rough analogy is the fence is a planer and without the fence is a jointer. If yo ...

    Re: Need help evaluating my pay. Please help!
    A message posted at WOODWEB's Business and Management Forum (1/18) -- Around here in So Calif that position pays $55k including health insurance, hig ...

    Re: AutoCAD 3D
    A message posted at WOODWEB's CAD Forum (1/18) -- Mark, That was a very helpful post, thank you, that is the type of information I was looking for. W ...

    check valve on Binks gun
    A message posted at WOODWEB's Finishing Forum (1/18) -- Anyone have trouble with the plastic check valves fouling up when spraying. Binks part # 54-4 ...

    Re: Theft in the shop?
    A message posted at WOODWEB's Business and Management Forum (1/18) -- Do you guys have employee manuals that spell out that theft is cause for immedi ...

    Re: Increasing penetration of oil finishes
    A message posted at WOODWEB's Finishing Forum (1/18) -- Nice work Todd. Must be nice shooting clears all the time :-). I'm currently in a pigmented f ...

    Re: check valve on Binks gun
    A message posted at WOODWEB's Finishing Forum (1/18) -- That part is only replaceable - I think they come in packs of 10. If you want a better soluti ...

    Re: Maksiwa Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- We've been using one for about 6 months and hadn't had any issues. It works well for our ...

    Re: Brandt Gluepot Issue
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- We've had similar problems on our Brandt contour bander. There isn't anything in the area ...

    Re: Dust Collector Leaking Dust
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/18) -- A supporter here will make them to order. Send them an old one an ...

    Re: selling 3Form
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- The customer paid for it, deliver it to the customer or contact the rep and a ...

    Drying 8/4 Cypress
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- Any idea on how long to air dry 8/4 Cypress before being able to safely dry it in the ...

    Re: kremlin 10;1 air assist
    A message posted at WOODWEB's Finishing Forum (1/18) -- The lubricating oil is designed not to interfere with designed clears/paints. Unless it is le ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/18) -- I have had one failure, not veneer, using TB3. It turns out it was a bad batch of glue,probab ...

    Buying first cnc router
    A message posted at WOODWEB's CNC Forum (1/18) -- Hi all, new to this site, but hoping for some advice. We are looking to buy our first cnc router fo ...

    New CNC purchase
    A message posted at WOODWEB's CNC Forum (1/18) -- Hello folks. New to this site but it was recommended by a friend of mine. I am about to purchase my ...

    Re: Veneering a long countertop
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Do a search on Dave Scholar and thick veneer. He does this all the time for doors. My 2 c ...

    Re: AutoCAD 3D
    A message posted at WOODWEB's CAD Forum (1/18) -- This video is 5 minutes and 39 seconds long of making a icosahedro. How long does it take with para ...

    Re: Brandt Gluepot Issue
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Dust collection issue? I had similar problems with an old bander with inadequate vacuum. ...

    Re: Dust Collector Leaking Dust
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/18) -- Filter bags don't last forever. Have you considered replacing all ...

    Re: kremlin 10;1 air assist
    A message posted at WOODWEB's Finishing Forum (1/18) -- been getting a slight blistering overspray looking thing in my cv.its just very random,and im ...

    Re: Recruiting My Employees
    A message posted at WOODWEB's Business and Management Forum (1/18) -- That is a tough one. Not that I know the answer, but get rid of any bad apples ...

    Re: selling 3Form
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- I hope the customer prepaid for the materials ?? You may have to create the w ...

    Re: kremlin 10;1 air assist
    A message posted at WOODWEB's Finishing Forum (1/18) -- Good points Shane, if he is into top and lower seal kits and pump shaft it could get expensiv ...

    Re: Best wood for shower
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/18) -- White oak will turn black as soon as the moisture gets to it. Saturat ...

    Re: Drill & Dowel insert machine
    A message posted at WOODWEB's CNC Forum (1/18) -- Omal 1300 HBD, 4+ yrs and only a couple minor hiccups. We do, I would guess, around 80K-100K dowels ...

    Re: Brandt Gluepot Issue
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Dorus KS 217, new glue. I've had this machine for 10 years, and this has always been an i ...

    Re: Brandt Gluepot Issue
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- I've tried a several types of glue over the years, has seemed to make a noticeable differ ...

    Re: Salice Air Hinge
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/18) -- I love the look and idea. I've only seen one place with pricing on th ...

    Re: Things to come
    A message posted at WOODWEB's Business and Management Forum (1/18) -- I assume that means good? Just kidding Pat, love the graphs What do you think t ...

    Re: Increasing penetration of oil finishes
    A message posted at WOODWEB's Finishing Forum (1/18) -- Have you tried spraying your oil? Maybe a high pressure spray gun would help. ...

    Re: selling 3Form
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- It might help to post a link to your listing, or at least give a description ...

    Re: Increasing penetration of oil finishes
    A message posted at WOODWEB's Finishing Forum (1/18) -- Very very beautiful work Todd. Are you shooting oils or something else? ...

    Re: Best wood for shower
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/18) -- If there not high end clients, why not just use axel? ...

    Jointer
    A message posted at WOODWEB's WOODnetWORK Forum (1/18) -- Would anyone know how to get the bed adjustment parts for a Seco 12 FPN Jointer? And, a man ...

    Re: Recruiting My Employees
    A message posted at WOODWEB's Business and Management Forum (1/18) -- Take the job. Don't worry about things you can't control. ...

    lenmar megavar
    A message posted at WOODWEB's Finishing Forum (1/18) -- does anybody use this on a consistent basis,and how is it working for you? ...

    Re: Floor sweeper
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/18) -- We have a factory cat and it works well. ...

    Re: Brandt Gluepot Issue
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- What glue are you using? How old is it? ...

    Re: Need help evaluating my pay. Please help!
    A message posted at WOODWEB's Business and Management Forum (1/18) -- This may help ...

    Re: Plung and Fed rate
    A message posted at WOODWEB's CNC Forum (1/18) -- You could also edit the code and add a ramp-in. ...

    Things to come
    A message posted at WOODWEB's Business and Management Forum (1/18) -- Things to come ...

    Re: STOCK FEEDER
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Thanks Jeff! :-) ...

    Re: STOCK FEEDER
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Western Roller ...

    Re: OSHA
    A message posted at WOODWEB's Business and Management Forum (1/18) -- Robert, When OSHA was originally set up it was a self funded agency. I don't kn ...

    Re: best blade tooth config for cutting veneer
    A message posted at WOODWEB's Veneer Forum (1/18) -- For ripping veneer, I like triple chip grind (TCG) blades (10" 80 tooth). Think of a TCG as ...

    Re: OSHA
    A message posted at WOODWEB's Business and Management Forum (1/18) -- I'm sorry, but maybe I'm the only one upset over this statement. "I do my ...

    Software
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Hi, we're a medium sized workshop looking to upgrade the software in our office in the ne ...

    Re: Saleman
    A message posted at WOODWEB's Business and Management Forum (1/18) -- Larry, We have a very simple system. You bring in a client, he's yours. You sel ...

    Re: parametric program
    A message posted at WOODWEB's CNC Forum (1/18) -- I am wondering if you are looking for code specific for Fagor control. If that is the case I can no ...

    Re: The Reality of NFPA 664
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/18) -- Flex hose is very bad. You could improve your collection signific ...

    Shipping prices
    A message posted at WOODWEB's Business and Management Forum (1/18) -- I have a potential commission for 12 stools to be shipped to San Antonio; I'm i ...

    Re: I fell into a sawmill opportunity and would like some advice
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- Sounds like you need to work out a business plan. What about all the support equipmen ...

    Re: Replacing bags with canisters
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/18) -- I have....DON'T DO IT!!!! You will be sorely disappointed! The ca ...

    Re: I fell into a sawmill opportunity and would like some advice
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- It could be a good start in a good industry. I think a bandmill is the way to go for ...

    Re: OSHA
    A message posted at WOODWEB's Business and Management Forum (1/18) -- We went through an OSHA inspection a few years ago. The long and the short is t ...

    Re: Colron Indian Rosewood Wood Dye
    A message posted at WOODWEB's Finishing Forum (1/18) -- I had a similar response from both Symphony Coatings and Morrells which was that they can onl ...

    Re: I fell into a sawmill opportunity and would like some advice
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- Thanks for the response. The lumber does not need to be dried at all so that's a defi ...

    Re: Fast bonding of 1/4" pieces?
    A message posted at WOODWEB's Adhesives Forum (1/18) -- Ken, Yes - I came up with about $31-$32 ea if made with solid wood, and $23 out of plywood. B ...

    Re: OSHA
    A message posted at WOODWEB's Business and Management Forum (1/18) -- OSHA fines can be negotiated, if the inspector made a comment like you look goo ...

    Re: Premature Finish Failure
    A message posted at WOODWEB's Finishing Forum (1/18) -- I've never had good luck with precat in a kitchen. The one I built in my house included. The ...

    Installing a refrigerator next to a corner base cabinet
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/18) -- Trying to layout a kitchen with a wall 76" long with a hallway o ...

    Re: computer generated drawings ?
    A message posted at WOODWEB's CAD Forum (1/18) -- It's tough to say where that drawing came from. I use Mozaik. Mozaik uses sketchup for the 3d outpu ...

    newby sawyer, more questions.
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- Can any of you inform me as to fair market value on actual saw milling? My logs vs. t ...

    Re: parametric program
    A message posted at WOODWEB's CNC Forum (1/18) -- i created something in the past, with c# ,that keep all lines ,arc distance from the edges if you w ...

    Re: parametric program
    A message posted at WOODWEB's CNC Forum (1/18) -- I don't think you can do that with v-carve but I could be wrong. I could write one for biesse works ...

    Re: OSHA
    A message posted at WOODWEB's Business and Management Forum (1/18) -- Robert I suspect that statement was made in jest. It is a part of the ongoing h ...

    Re: Is anyone using Eficad- SWOOD cad/cam software?
    A message posted at WOODWEB's CNC Forum (1/18) -- I have a buddy who uses solidworks for a lot of cabinet stuff. He has been looking at pathfinder wi ...

    Re: Fusion Finish??
    A message posted at WOODWEB's Finishing Forum (1/18) -- Amazing Glaze is made by ML Campbell. Spray on dries almost instantly. Sand off with a worn s ...

    Re: Fusion Finish??
    A message posted at WOODWEB's Finishing Forum (1/18) -- Why not ask where you got the sample from? Or are you copying your competition? If I was to t ...

    Re: Undermount soft close drawer slides
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Went to the last awfs show and scrutinized all the slides except the kv. Hands down winne ...

    Re: Oak Tabletop
    A message posted at WOODWEB's Furniture Making Forum (1/18) -- Whatever you do don't use cross grain construction, or any other angle except parallel ...

    Re: computer generated drawings ?
    A message posted at WOODWEB's CAD Forum (1/18) -- No expert on all theCAD programs out there, but if I had to guess, I would say the drawings are in ...

    Re: Fusion Finish??
    A message posted at WOODWEB's Finishing Forum (1/18) -- Yes it is mdf where do i get this amazing glaze and yes im trying to copy competition was tol ...

    Re: Dowel pin supplier
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- HDL in Minnesota has some. www.hdlusa.com I have no financial association with them, just ...

    Re: Replacing bags with canisters
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/18) -- Jerry, You need to research a Thien baffle. Works great under a c ...

    Re: computer generated drawings ?
    A message posted at WOODWEB's CAD Forum (1/18) -- Those are Cabnetware drawings. You can see a lot of examples on my Website of the CAD drawings and ...

    Fusion Finish??
    A message posted at WOODWEB's Finishing Forum (1/18) -- Any tips on how to achieve this finish, its called Fusion finish here are a couple pics of wh ...

    Re: Fusion Finish??
    A message posted at WOODWEB's Finishing Forum (1/18) -- All right Dave! Of course you have to. I'd ask one of the competition's employees. ...

    Re: computer generated drawings ?
    A message posted at WOODWEB's CAD Forum (1/18) -- Ecabinets Systems is free. I've been using it 8 years ...

    Wood CAD/CAM
    A message posted at WOODWEB's CAD Forum (1/18) -- Anyone made the step forward to this software? Thoughts? ...

    Re: Looking for "Inventor" type software
    A message posted at WOODWEB's CAD Forum (1/18) -- I just wanted to update this thread if it is of use to anyone. I've been through an exhaustive sear ...

    Re: Roller Blade Guides Affect on Blade Life
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- I I think that system will shorten the blades life but I don't think it is so much. H ...

    Re: 45º shaper tooling question
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18) -- I have a vari angle amana set up in exactly the way you want to use it on a dedica ...

    Re: Anyone use a Dynabug?
    A message posted at WOODWEB's Finishing Forum (1/18) -- I tried the surface pref about three months ago. I was very reluctant. My sales rep from Wurt ...

    Re: Kremlin/Water Base Primer
    A message posted at WOODWEB's Finishing Forum (1/18) -- I've had this issue with both Kremlin 10-14 and the newer EOS pumps with the same Chemcraft p ...

    Re: Kremlin/Water Base Primer
    A message posted at WOODWEB's Finishing Forum (1/18) -- interesting read, fittings cannot cause a material to harden unless a brass fitting might com ...

    CNC trade show?
    A message posted at WOODWEB's CNC Forum (1/18) -- Anyone know when the next trade show will be showing off CNC routers and technology? I'm interested ...

    Roller Blade Guides Affect on Blade Life
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- As an engineer with some knowledge of metal fatigue, I wonder if anyone on this forum ...

    Re: How would you go about building this?
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- the outer circle is a given, start with your "Back" as a template a ...

    Barn siding for kitchen island
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- Hey guys, so we have this kitchen island to do for a client that calls for a ...

    KCD question
    A message posted at WOODWEB's CAD Forum (1/18) -- Most of our work comes to the with drawings already , but somethings we use kcd to draw plans and o ...

    Re: Adequacy of shaper for stacked tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18) -- Most shaper spindles are stackable. 1'' should be adequate for that size stack and ...

    Re: Need help diagnosing
    A message posted at WOODWEB's Veneer Forum (1/18) -- Mike best advice now cut your losses and start over. Go back to the place that lay up this panel ...

    Re: Roller Blade Guides Affect on Blade Life
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- !/4 " down pressure with roller guides is no problem as I get up to 20 sharpenin ...

    Re: Roller Blade Guides Affect on Blade Life
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- Attached is a jpeg file of the situation. If the guide roller pushes the blade down . ...

    Re: finishing high moisture content wood
    A message posted at WOODWEB's Finishing Forum (1/18) -- I just turned down a small wainscoat job made from log siding which would come at 18%......cl ...

    Re: Anyone use a Dynabug?
    A message posted at WOODWEB's Finishing Forum (1/18) -- Check out SurfPrep 3x4 with our 5mm very fine pads. Much longer life than regular paper and v ...

    black stained maple cabinets
    A message posted at WOODWEB's Finishing Forum (1/18) -- I'm having some issues on my current project with being able to see the woodgrain on black st ...

    Re: Barn siding for kitchen island
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- The base looks segmented plank from the photo. at a 44" plus radius this ...

    Re: finishing high moisture content wood
    A message posted at WOODWEB's Finishing Forum (1/18) -- I would recommend having the slabs dried in a Kiln before finishing and explain why to the ow ...

    Re: Barn siding for kitchen island
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- thanks james,,,, thats pretty much our first guess at doing it,,,, but always ...

    How would you go about building this?
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- http://incrediblethings.com/wp-content/uploads/2009/05/cardboard-yin-yang-boo ...

    Re: Roller Blade Guides Affect on Blade Life
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- Can you post a drawing, as this does not make sense to me as described. ...

    Re: How would you go about building this?
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- Kerf- core , is much better than wacky wood or bending Luan ...

    Re: table legs
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- I guess I did a good thing did you look at the other picture of the out side ...

    Re: Growing black locust in MN
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- I've sawed my share of Black Locust that grows around southwestern PA and it's a toug ...

    Kiln Newbie
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- I have spend hours on the forum reading, so I apologize if this was discussed somewhe ...

    Re: Kiln Newbie
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- Where are you located? It is hard to mix solar and electric. The reason is that a sol ...

    Re: Growing black locust in MN
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- Thanks for the advice. I am at the far end of the growing zones for Black Locust for ...

    Re: Need a quick KD hardware solution for freestanding wall panels
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/18) -- Matt, Here is the assembly of a show booth that we used for several y ...

    Re: Suitability of plastic dust barrels
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/18) -- I can't breath in my house without starting a personal lightning ...

    Re: Suitability of plastic dust barrels
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/18) -- On my cyclone it will pull once the drop hose gets plugged. Somet ...

    Re: Drills
    A message posted at WOODWEB's WOODnetWORK Forum (1/18) -- There are charts for cutting metal by where each has a surface feet per minute value, mild ...

    Re: Need a quick KD hardware solution for freestanding wall panels
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/18) -- Thanks Dennis. That's exactly the kind of functionality I need. But t ...

    Re: Kiln Newbie
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- Sounds like an interesting project. Gene would be a GREAT source of info on this larg ...

    Re: air drying ash
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- I agree. The conditions is Ohio will not dry under 12% MC, but for furniture, cabinet ...

    Re: Looking for a mini jobsite compressor
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/18) -- I have the Senco PC1010, very light weight and keeps up with one trim ...

    Re: Growing black locust in MN
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- Indeed, it seems good that no added chemicals are needed. But do you know what chemic ...

    air drying ash
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- I have 270 bf of quarter sawn ash that was cut last oct. I have it stickered in my sh ...

    Re: Laminate routering
    A message posted at WOODWEB's WOODnetWORK Forum (1/18) -- I've started using the Art Betterly no file router "twin trim". It has to be adju ...

    Re: Need a quick KD hardware solution for freestanding wall panels
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/18) -- I would check with Titus or Hafele for a fitting. Both have a huge se ...

    Re: Drills
    A message posted at WOODWEB's WOODnetWORK Forum (1/18) -- Speaking of RPM's anyone have a chart of with wood bits what optimal RPM's would be? On sma ...

    Re: Drills
    A message posted at WOODWEB's WOODnetWORK Forum (1/18) -- I don't know about optimal, but my drill press shows 8k rpm's for a 1/8" bit in wood. ...

    Re: Edging Counters with 3mm PVC best practices?
    A message posted at WOODWEB's Adhesives Forum (1/18) -- We warm our edgeband before we apply it. Usually about 110-120 degrees. If you get it too hot ...

    AeroTech Dust Collection Tool Holder
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/18) -- Is anyone using the AeroTech tool holder from FS Tool? It looks g ...

    Re: Any tips for using 5x10 press for veneer and P-Lam?
    A message posted at WOODWEB's Veneer Forum (12/17/24) -- I used to use a flip top press for veneer and plam. It has been a while since I bought a hot ...

    Re: CNC Starter Tooling? What do we need?
    A message posted at WOODWEB's CNC Forum (12/17/24) -- Mike: your input was very helpful.... but actually not at all... i only suggested this since he ...

    Re: CNC Starter Tooling? What do we need?
    A message posted at WOODWEB's CNC Forum (12/17/24) -- Z, Not sure what you are even talking about. I was just saying that the factory surface should ...

    Re: CNC Starter Tooling? What do we need?
    A message posted at WOODWEB's CNC Forum (12/17/24) -- Hah. That went south real quick. I wasn’t doubting you about surfacing both sides, or trying to ...

    Re: Engineered Planks
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17/24) -- Seems like a lot of work for negligible gain. Perhaps there 8s a certain ...

    Re: Any tips for using 5x10 press for veneer and P-Lam?
    A message posted at WOODWEB's Veneer Forum (12/17/24) -- Tom that is excellent help! Thank you for that. I am copying your whole post and sharing it ...

    Re: CNC Starter Tooling? What do we need?
    A message posted at WOODWEB's CNC Forum (12/17/24) -- Harry, I've been following this post since the beginning. I don't have anything to add, but I t ...

    Re: Any tips for using 5x10 press for veneer and P-Lam?
    A message posted at WOODWEB's Veneer Forum (12/17/24) -- Ive always used a bag and not a flip top press but....Pay attention to the shop temp with un ...

    Re: Engineered Planks
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17/24) -- One more thing. Do some samples. If there is a risk of the veneers pullin ...

    Re: What vacuum pump would you recommend?
    A message posted at WOODWEB's CNC Forum (12/17/24) -- Busch, Becker, Leybold, and Edwards, it depends on your needs. ...

    Re: Lacquers vs water finishes
    A message posted at WOODWEB's Finishing Forum (12/17/23) -- I've been spraying finishes for close to 50 years...and still do on 5-6 days per week bas ...

    Re: Shaker doors
    A message posted at WOODWEB's Cabinetmaking Forum (12/17/23) -- If I did that I would probably use a maple on MDF panel, not birch. No need to use bo ...

    Re: Shaker doors
    A message posted at WOODWEB's Cabinetmaking Forum (12/17/23) -- Darrell , Mdf or Plywood core is totally acceptable. Mdf also is stable and good choi ...

    Re: Shaker doors
    A message posted at WOODWEB's Cabinetmaking Forum (12/17/23) -- No I meant I use a 1/4 inch MDF panel with birch veneer on both sides ...

    Re: Veneer in exteriors
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17/23) -- Look up parklex panels. Specifically made for this ...

    Re: Kremlin dealer
    A message posted at WOODWEB's Finishing Forum (12/17/22) -- The air-assisted airless gun is the most important part of the system. Therefore, shop ar ...

    Re: ML Campbell Turino wrinkling
    A message posted at WOODWEB's Finishing Forum (12/17/22) -- It happens to me, also. In my case, it's often on top of Level Primer, and Level Sealer. ...

    Re: Vertical cnc
    A message posted at WOODWEB's CNC Forum (12/17/22) -- Thank you for your comets. Im a former owner of custom wood working shop that was sold 4 year a ...

    Re: Shaper head with dowel profile knife
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17/22) -- Easiest solution, a 2 pocket head from any of the above mentioned compani ...

    Re: Kremlin dealer
    A message posted at WOODWEB's Finishing Forum (12/17/22) -- daniel, graco did not exactly tell you correct information. here is why, so much depends ...

    Re: Airless vs AAA
    A message posted at WOODWEB's Finishing Forum (12/17/22) -- You can use a Graco G40 or a CA Technologies Cougar air-assisted airless on an airless pu ...

    Need to laminate and trim large volume of legs 2.3125 x 2.3125 x 32"
    A message posted at WOODWEB's CNC Forum (12/17/22) -- I need to find a machine that can apply and trim HPL to a square leg that is 2 5/16" x 2 5 ...

    Re: Chargers in a bar top?a
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17/22) -- HI David, if you are open to wireless charger, perhaps a removeable venee ...

    Re: ML Campbell Turino wrinkling
    A message posted at WOODWEB's Finishing Forum (12/17/22) -- I've never used Turino so I can't really help you there. I use Stealth and have never had ...

    Re: Dark paint dry times
    A message posted at WOODWEB's Finishing Forum (12/17/22) -- Turino dark (clear base) sux, period. It stays sticky for days. We had the heat on 100 de ...

    Re: Custom Cabinetry and remodeling
    A message posted at WOODWEB's Business and Management Forum (12/17/22) -- Chris, now your making some sense. To put myself out there, I am a journeym ...

    Re: Buying a millwork business in this economic climate
    A message posted at WOODWEB's Business and Management Forum (12/17/22) -- Matt, you hit the nail on the head....it's every job and every day there ar ...

    Re: Vertical cnc
    A message posted at WOODWEB's CNC Forum (12/17/22) -- I just watched the 12 minute demo video. We run a Holzher 5 axis pod and rail and it's a great ...

    Re: Shaper head with dowel profile knife
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17/22) -- How big of a shaper are you putting this on? Or is it a molder? What size ...

    Re: soft close side mount drawer guides
    A message posted at WOODWEB's Cabinetmaking Forum (12/17/22) -- I’m assuming a melamine drawer. I’d predrill for the screws but add a few drops of Ro ...

    Re: Panels direct from China
    A message posted at WOODWEB's Business and Management Forum (12/17/22) -- James good evening. Im thinking of buying a beam saw and 6 side cnc machine ...

    Shaper head with dowel profile knife
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17/22) -- Shaper heads are not my forte so i need advice what product to buy. I nee ...

    Re: Water base primers
    A message posted at WOODWEB's Finishing Forum (12/17/22) -- ML Campbell Universal Waterbase Primer is a good, easy to use wb primer. So is the Sherwi ...

    Re: Hot air edgebanding - can you get edgeband
    A message posted at WOODWEB's Cabinetmaking Forum (12/17/22) -- Rob, could you explain what coextruded edge banding is? Do I understand correctly tha ...

    Re: kremlin airmix pump
    A message posted at WOODWEB's Finishing Forum (12/17/22) -- Sources of fisheye contamination: the person spraying? Are the hands washed, no oils from ...

    Re: soft close side mount drawer guides
    A message posted at WOODWEB's Cabinetmaking Forum (12/17/22) -- I was considering this because the contractor uses melamine for cost Trouble is melam ...

    Re: Chargers in a bar top?a
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17/22) -- You could pop one of these every 48" https://www.richelieu.com/ca/en ...

    Re: Shaper head with dowel profile knife
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17/22) -- 5 hp shaper, not on a moulder. 2 passes to make the dowel, second pass se ...

    Re: soft close side mount drawer guides
    A message posted at WOODWEB's Cabinetmaking Forum (12/17/22) -- We just did a job that speced KV 8450 . They actually worked pretty good for a side m ...

    Holzher 1265 panel saw trouble shooting
    A message posted at WOODWEB's WOODnetWORK Forum (12/17/22) -- 1265 holzher panel saw. Saw works in horizontal position but when swivel head back to v ...

    Re: Holzher 1265 panel saw trouble shooting
    A message posted at WOODWEB's WOODnetWORK Forum (12/17/22) -- Sounds like you have bad wiring going into the saw head and the tension of rotating eit ...

    Re: Edgebander Help Maksiwa CBC T
    A message posted at WOODWEB's Cabinetmaking Forum (12/17/22) -- Check out the Minimax me20. I have had one for almost 8 years, its been a great littl ...

    Re: Compact table saw or something else?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/17/22) -- Maybe one of the festool track saw work tables. ...

    Re: soft close side mount drawer guides
    A message posted at WOODWEB's Cabinetmaking Forum (12/17/22) -- Thanks Karl, yeah same for me, but I heard they were ok now. ...

    Looking for a new 5" 5 hole hook and loop air sander
    A message posted at WOODWEB's Finishing Forum (12/17/21) -- Hello Everyone, I have been using a 5" 5 hole dynabrade 3/32 orbit H&L ROS hooke ...

    Re: Wooden stair treads tight against metal skirt board.
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17/21) -- I'm not the original Adam poster I agree with David. As long as you make ...

    Re: Is this "spray booth setup" dangerous?
    A message posted at WOODWEB's Finishing Forum (12/17/21) -- I 'm just flabbergasted. Coming from being a professional cabinetmaker/professional finis ...

    Re: Wooden stair treads tight against metal skirt board.
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17/21) -- What I see is: There is a 4 pc, 1-1/2" angle iron frame between the ...

    Re: Wooden stair treads tight against metal skirt board.
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17/21) -- After a second cup of coffee, I reaized that if the treads are 1-1/2" ...

    Roller hold downs
    A message posted at WOODWEB's CNC Forum (12/17/21) -- Hi All. I'm looking for feedback from anyone who has a roller hold down machine: Do you like it ...

    Re: Stainless steel laminated to baltic birch
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/17/21) -- What was the thickness of the steel that you used? Thanks! ...

    Re: Jointer Setup
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17/21) -- The value of safety Z height and origin height can be set through the tool pat ...

    Surfprep
    A message posted at WOODWEB's Cabinetmaking Forum (12/17/21) -- Is there any experience that Surfprep Sanders does NOT create pigtails? Thank you! ...

    Re: Surfprep
    A message posted at WOODWEB's Cabinetmaking Forum (12/17/21) -- Proper orbit size and quality abrasives prevent most pigtails. ...

    Tracking jobs
    A message posted at WOODWEB's Business and Management Forum (12/17) -- Currently we use paper time cards and write in job names with hours. The book ...

    Modifications to Porter Cable Dovetail Jig for consistent results
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- I struggled with the Porter Cable Dovetail Jig model 4212, because it would not give me ...

    Re: XCITE 129-729-912
    A message posted at WOODWEB's Finishing Forum (12/17) -- Yeah, same information I've been coming up with but I found these two yesterday. For the aft ...

    Slide out drawer lock
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- I'm looking to lock out the Blum Moventos slide at full extension, to keep stabilized fo ...

    Re: Pivot Door Latching?
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- We are building a 4 x 10' offset pivot door right now. We chose to go with a ...

    Re: UV finishing for small shops
    A message posted at WOODWEB's Finishing Forum (12/17) -- It's almost impossible to spray 100% solids UV. First off its too dangerous health wise and ...

    Re: Slide out drawer lock
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- I think your taking about the blum pull-out shelf lock...it can work on drawers though n ...

    Eastern white pine for projects
    A message posted at WOODWEB's Sawing and Drying Forum (12/17) -- Good evening to all. I have a skid of two by 4s and two by 8s of eastern white pine ...

    Re: Glue spreader for solid wood glueups
    A message posted at WOODWEB's Adhesives Forum (12/17) -- Its a Taylor, I don't think they make it any more according to their website. There is a red ...

    Re: Anyone good with postprocessors?
    A message posted at WOODWEB's CNC Forum (12/17) -- It would be helpful if you mentioned what software you are using and what kind of machine you are ...

    Blum mini press
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- I am looking for some parts to complete a Blum mini press, I was curious if anyone had s ...

    Re: Tracking jobs
    A message posted at WOODWEB's Business and Management Forum (12/17) -- I use Timesheets.com. Inexpensive, web based, smart phone friendly, scalable, ...

    Re: Where to divide work
    A message posted at WOODWEB's Business and Management Forum (12/17) -- Bobby, As son as I translate that from Greek to reality I'll post a response. ...

    Re: Slide out drawer lock
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Very interesting. Thanks for that different line of thinking. I might look into parts fo ...

    Re: Slide out drawer lock
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- https://www.amazon.com/dp/B00CTIK9AM?tag picclick0f-20&linkCode osi&th 1&a mp;ps ...

    Re: Built Up MDF Edge or Edgebanding for Pigmented Finish on Table Top?
    A message posted at WOODWEB's Finishing Forum (12/17) -- Hi Scott, thanks for your reply! ...

    Re: Slide out drawer lock
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Maybe you could make something from the RV/Boat industry work. ...

    Re: sandpaper backing vs. polishing
    A message posted at WOODWEB's Furniture Making Forum (12/17) -- Make sure your DA/RA has a new flat pad. ...

    Re: Cabinet Vision and DXF Files
    A message posted at WOODWEB's CAD Forum (12/17) -- The 20mm holes in the dxf you attached are not round holes. ...

    Re: Anyone good with postprocessors?
    A message posted at WOODWEB's CNC Forum (12/17) -- thankyou for the replies. All sorted now :-) ...

    Re: Hudson Oscar 52 regrets
    A message posted at WOODWEB's Sawing and Drying Forum (12/17) -- If you and I have the same definition, blade flutter is caused in a new machine, wit ...

    Re: Hudson Oscar 52 regrets
    A message posted at WOODWEB's Sawing and Drying Forum (12/17) -- Rastus, I feel your pain as I've been through new unnecessary adjustments with both ...

    Re: Dovetail machines
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- I’ve had the exact experience as you Jonathan. I’ve had my Grizzly dovetail machine for ...

    Re: Dovetail machines
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Im with Pat on this one you guys. If your market is residential and you are using soft c ...

    Net working to older biesse XP machine
    A message posted at WOODWEB's CNC Forum (12/17) -- We have just installed a 2013 BreMa EKO 903. It is running "windows imbedded standard" S ...

    Re: Kremlin and CA Tech spray tips for AAA guns.... Opinions?
    A message posted at WOODWEB's Finishing Forum (12/17) -- Having sprayed both a pressure pot and several brands of AAA pumps, I can assure you that th ...

    Re: making in house Dovetail Drawer boxes using flat bed router and vortex
    A message posted at WOODWEB's CNC Forum (12/17) -- We make dovetail drawers off the router all the time. Vortex tooling is very good and that is what ...

    swing-chisel mortiser
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- I spent a while searching for a used chisel mortiser for my startup-production li ...

    Re: Classical Palace router bit needed
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Guys I appreciate the effort. DJS, do you have a millwork shop you recommend? We don't h ...

    Re: Net working to older biesse XP machine
    A message posted at WOODWEB's CNC Forum (12/17) -- Not sure if this helps but I have an older Biesse Arrow which also doesn't play nice with Windows ...

    Re: Classical Palace router bit needed
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- FM, Find the millwork shop nearest your location and have them run it for you. If they d ...

    Re: Net working to older biesse XP machine
    A message posted at WOODWEB's CNC Forum (12/17) -- This kind of stuff drives me nuts, I can't believe they are not supporting it. I'm sure someone, s ...

    Re: stain reducer- make
    A message posted at WOODWEB's Finishing Forum (12/17) -- I've thinned waterbased stain with mineral spirits (some junk I bought from Lowes along time ...

    looking for a milling head
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- I am looking for information about a company named BSP I have milling head with that bra ...

    making in house Dovetail Drawer boxes using flat bed router and vortex tool
    A message posted at WOODWEB's CNC Forum (12/17) -- I was wondering is any one was making drawer boxes on your flat bed CNC using pre finished multipl ...

    Re: Net working to older biesse XP machine
    A message posted at WOODWEB's CNC Forum (12/17) -- Well Biesse seems to be pretty far behind on OS. We just got a new Rover A running on Win7. That O ...

    Re: Freight Shipping
    A message posted at WOODWEB's Business and Management Forum (12/17) -- There aren't too many options out there. I will leave a link to a company I ha ...

    Re: China Trade War & US Lumber Companies
    A message posted at WOODWEB's Business and Management Forum (12/17) -- Financing of the forestry business can be a huge problem for any logger compan ...

    Re: Dovetail machines
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Jonathan, Perception is everything. It is a great selling point that sets you apart from ...

    Re: Classical Palace router bit needed
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- We could do it, but it would be a custom tool. ...

    Re: specific gravity/ wagner mmc220
    A message posted at WOODWEB's Sawing and Drying Forum (12/17) -- The mystery continues in my mind...I attempted to examine the end grain. The slabs I ...

    Re: Custom cabinet pricing per liniar foot
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Not near enough information and you really need to build your own pricing by doing a moc ...

    Re: Biesse bSolid or Wood CAD Cam
    A message posted at WOODWEB's CAD Forum (12/17) -- Ive been using bSolid for about 6 months now. I was trained by Biesse at their Anaheim showroom. I ...

    Re: Biesse or Felder
    A message posted at WOODWEB's CNC Forum (12/17) -- I have some Felder tool, and honestly, have not been impressed with their support. The tools thems ...

    Re: Separate installation bid
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- It seems most folks want an exact price when done, if you work fast then they win if slo ...

    Re: Separate installation bid
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- I'm with D Brown. 1 price! When I first started, I bid work on a labor and material brea ...

    Re: Custom cabinet pricing per liniar foot
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Ashton, This is not exactly my expertise but knowing what I do know, there are far too m ...

    Re: Cancelled Project
    A message posted at WOODWEB's Business and Management Forum (12/17) -- I'm going to agree fully Karl E. Brogger above. I couldn't have said it better ...

    Re: Water Content Of Hickory For Indoor Use
    A message posted at WOODWEB's Furniture Making Forum (12/17) -- In the more than 40 years that I have been kiln drying lumber for industrial use (fur ...

    looking for a machine
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- We have an old holzer edgebander that we have retrofit several times to do what w ...

    Separate installation bid
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- For those of you that build and install...do any of you or have any of you given thought ...

    Re: 3d Autocad tips
    A message posted at WOODWEB's CAD Forum (12/17) -- Great Advice from CADMebel, IMHO... I resisted drawing in 3d, myself, until I realized that THEN, ...

    Commercial laminate doors
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- I have a project that architect is calling for laminate on moisture resistant plywood fo ...

    Re: Custom cabinet pricing per liniar foot
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- We bid a commercial job a few years ago and we were considered too low by the GC compare ...

    Re: Custom cabinet pricing per liniar foot
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- It all depends on what caliber of work you do and where you are located. This info shoul ...

    Re: Euro-joint ?
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- Hi Joe; I was hoping you would respond. No Euro hardware but I still am wond ...

    Re: Unconventional customers
    A message posted at WOODWEB's CNC Forum (12/17) -- Best market for you is overflow from the shops that are too busy. Doing the same kind of work they ...

    Kiln Drying Workshop - Syracuse
    A message posted at WOODWEB's Sawing and Drying Forum (12/17) -- We are again holding our Annual Kiln Drying Workshop at SUNY ESF January 7-10, 2019 ...

    Re: Unconventional customers
    A message posted at WOODWEB's CNC Forum (12/17) -- Cutting for other shops during your downtime can be a good thing but make sure you hit your promis ...

    Re: Separate installation bid
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- In many states, a separate installation price affects the sales tax basis. At bid time w ...

    Old Grass Hinges
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Does Grass still make the hinges that have a socket pressed into the cup hole, an then i ...

    Re: Custom cabinet pricing per liniar foot
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- This topic has been discussed at length many times. I suggest you start by reading those ...

    Re: Old Grass Hinges
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- I don't believe they still make them but they do carry replacements. Contact your rep or ...

    Re: specific gravity/ wagner mmc220
    A message posted at WOODWEB's Sawing and Drying Forum (12/17) -- I cannot say for sure that either is American elm. What we need is a surface cut wit ...

    Re: Custom cabinet pricing per liniar foot
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Fastest way to go bankrupt! Bid by the foot in competition with other shops, ignoring yo ...

    Re: New jointer or get a spiral for the old one?
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- The Woodfordtooling is best online shop to get jointer planer blades ...

    Lighting for a Wood Shop
    A message posted at WOODWEB's Finishing Forum (12/17) -- Are there any new high efficiency lighting systems available for a woodworking shop? ...

    Re: Cutmaster to PDF
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- YOU ARE A LIFE SAVER! THANK YOU SOOOOOO MUCH ...

    Re: To End Match Or Not To End Match
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- Thanks guys for all of your advice. I do agree that end matching would be th ...

    Re: How are you all handling telemarketers?
    A message posted at WOODWEB's Business and Management Forum (12/17) -- Was thinking some more about that monster truck. It was so unusual that I stop ...

    Re: How are you all handling telemarketers?
    A message posted at WOODWEB's Business and Management Forum (12/17) -- Pat, I am interested in your input on a regulation I read about in yesterday's ...

    Re: Shop vac or festool for random orbit
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- The dust deputy cyclone is really a great addition if you do very much sanding. I build ...

    Re: sand between coats
    A message posted at WOODWEB's Finishing Forum (12/17) -- We sand as Jonathan says. 1/4 sheet sander, pad depends on what we are sanding. 320-400 but ...

    Re: How are you all handling telemarketers?
    A message posted at WOODWEB's Business and Management Forum (12/17) -- First to the trucking regulations. Self policing did not work, the drivers che ...

    Re: To End Match Or Not To End Match
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- Earlier this year, I did a wide plank floor of white oak, number 2 and 3 com ...

    Re: Oliver 4920 SLR
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- I have the Powermatic version of this saw, have had it for almost 15 years. Run t ...

    Re: Fuji HVLP with off-brand spray gun?
    A message posted at WOODWEB's Finishing Forum (12/17) -- I can't say with 100% certainty but id guess it'd be close but I dont think your going to ge ...

    Re: Shop vac or festool for random orbit
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Well I actually just bought the cyclone part and made my own collection bin, which is ju ...

    Re: Fuji HVLP with off-brand spray gun?
    A message posted at WOODWEB's Finishing Forum (12/17) -- From Fuji: "Generally speaking, HVLP turbine motors produce over 100 CFM (cubic feet pe ...

    Re: Shop vac or festool for random orbit
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Thanks for the info Kenny, I hadn’t thought about a separator but it makes perfect sense ...

    Re: MLC Agualente, Valspar Zenith, General finishes
    A message posted at WOODWEB's Finishing Forum (12/17) -- ICA Coatings are great. You must be willing to open your pocketbook to purchase their produc ...

    Cabinet Vision on Mac
    A message posted at WOODWEB's CAD Forum (12/17) -- Is anyone running cabinet vision or cabnetware on a mac with either bootcamp or parallels. If so h ...

    Re: To End Match Or Not To End Match
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- Bernie's explanation, is very good and yes end match if at all possible. Mak ...

    Re: Fuji HVLP with off-brand spray gun?
    A message posted at WOODWEB's Finishing Forum (12/17) -- There are cheap(er) turbine guns available. I've seen them on eBay. I bought a Titan Capspra ...

    Re: sand between coats
    A message posted at WOODWEB's Finishing Forum (12/17) -- Mark, When you say move fast that brings up a few more questions. When sanding raw wood i go ...

    Re: Help with Virutex EB25 wiring issue
    A message posted at WOODWEB's Veneer Forum (12/17) -- If you are unable to do so yourself do you not have a local electrician who could trace out the ...

    Re: Best filter media for shaker baghouse
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/17) -- JR I know this is off topic who makes your insert tooling for yo ...

    Re: Best filter media for shaker baghouse
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/17) -- Would the PTFE bags be good enough that the return air could go ...

    Re: Large Scale Drying
    A message posted at WOODWEB's Sawing and Drying Forum (12/17) -- Thanks. We hadn't thought of vacuum drying but that would be interesting. Rather tha ...

    Re: Post Laminating Finished Ends and bottoms of uppers
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- First step is to cut the bottoms form the same as the door and drawer front sheets and t ...

    Re: CV / 2K poly over lacquer wrinkling
    A message posted at WOODWEB's Finishing Forum (12/17) -- Ah I love it when a customer wants this. I think what you want is a more durable finish rath ...

    Re: CV / 2K poly over lacquer wrinkling
    A message posted at WOODWEB's Finishing Forum (12/17) -- Jim, putting a harder coating over a softer one is asking for more trouble. I'm not so sure ...

    Re: Large Scale Drying
    A message posted at WOODWEB's Sawing and Drying Forum (12/17) -- I can't think of anyone drying large Soft Maple squares but we have several customer ...

    CV / 2K poly over lacquer wrinkling
    A message posted at WOODWEB's Finishing Forum (12/17) -- Need advice, yearlong job. Our company is being asked to apply a harder finish over lacquer ...

    Re: Post Laminating Finished Ends and bottoms of uppers
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- David, You have several options here, it really depends on how you are set up. If you're ...

    Re: What ratio aaa pump?
    A message posted at WOODWEB's Finishing Forum (12/17) -- If you are going to use this pump as the "main" pump and spray all kinds of coatin ...

    Re: What ratio aaa pump?
    A message posted at WOODWEB's Finishing Forum (12/17) -- You don't have to thin them excessively but you do need to increase the air and fluid pressu ...

    Re: What ratio aaa pump?
    A message posted at WOODWEB's Finishing Forum (12/17) -- Both Bob & Denny make good points. Bob has me pegged because I say 15-1 for the cost sav ...

    Re: Edging High gloss white panels
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Yes, the unfilled clear glue certainly helps. So does pre-milling. We use that on everyt ...

    Re: Where to find this hinge
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- The company is called Classic Brass , lots of distributors sell them , Custom Service Ha ...

    Re: Post Laminating Finished Ends and bottoms of uppers
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Why are you against a dowel based system? It is so much faster overall. We have been usi ...

    Where to find this hinge
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Does anybody know where to find this hinge? Customer would like us to consider this. I w ...

    Re: finishing walnut
    A message posted at WOODWEB's Finishing Forum (12/17) -- Hello Jim just a quick response, I built a stereo cabinet a few tears ago from walnut and wa ...

    Re: CV / 2K poly over lacquer wrinkling
    A message posted at WOODWEB's Finishing Forum (12/17) -- Could you explain step No. 5, 'mist of 3 light coats'.....can't say I have every done this t ...

    finishing walnut
    A message posted at WOODWEB's Finishing Forum (12/17) -- I am making a dining table from walnut I've had for 40yrs. I would like to keep it looking a ...

    Re: Where to find this hinge
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Oops, I guess I should have read the description instead of just looking at the picture, ...

    Re: Where to find this hinge
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- It's a common Amerock no-mortice hinge. Here's one source that I've used in the past, bu ...

    Re: Where to find this hinge
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- I have got those from Richelieu and Lee Valley. You can also get faux leaf hinges now to ...

    Re: Drawing times in various software
    A message posted at WOODWEB's CAD Forum (12/17) -- cabinetvision 20 minutes to 30 minutes goes pretty fast when deadline isn't over my head. lol we r ...

    Re: Bathroom Finish Choices
    A message posted at WOODWEB's Finishing Forum (12/17) -- So maybe just 2k poly with its own sealer? I have used verde chiaro from chemcraft with good ...

    Re: 2 Ply Laminated Stiles
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- The best practice would include an odd number of plies with faces being the ...

    6 hour Work Day....Is it Possible in the US?
    A message posted at WOODWEB's Business and Management Forum (12/17) -- I know that there has been discussion in the past about 4-10 hour days as oppo ...

    Cabinet Door Finishing
    A message posted at WOODWEB's Finishing Forum (12/17) -- Here is a question I have had rolling around in my head for years... It is starting to eat a ...

    Re: 6 hour Work Day....Is it Possible in the US?
    A message posted at WOODWEB's Business and Management Forum (12/17) -- These are the kind of silly notions that take place when we are stealing money ...

    Re: Cabinet Lifts or Jacks
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/17) -- i saw a guy with 2 little black boxes which he used to install his u ...

    Re: 2 Ply Laminated Stiles
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- Thank you David;it sounds like 2 ply is a safe method done with good materia ...

    Heavy Duty Concealed Hinges
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Planning kitchen project for a client who wants shelf rack installed on the back of pant ...

    Re: Laminate Undermounts
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/17) -- Larry, I saw this a lot when I was working overseas. They would cut the ...

    Re: Anyone use ML Campbell Aqualente Pigmented Lacquer?
    A message posted at WOODWEB's Finishing Forum (12/17) -- I enjoyed using pigmented Aqualente. I found the booth temp was very important. Don't shoot ...

    Servicing Brandt Gluepot
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- I have a KD55 and am hoping to do some preventative maintenance on the gluepot. I had it ...

    Aspan question
    A message posted at WOODWEB's CNC Forum (12/17) -- I am using Aspan release 9.5po. I have always used it with Autocad and imported drawings from Acad ...

    Re: Veneer Failure
    A message posted at WOODWEB's Veneer Forum (12/17) -- No, we have not personally stripped a door front. We did sent a door to both the lacquer and ve ...

    Re: vacuum newbie
    A message posted at WOODWEB's CNC Forum (12/17) -- Hi Chris! Depending on what you are holding and how you plan to hold it will determine the type of ...

    Re: Heavy Duty Concealed Hinges
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- What joe said. Though they aren't soft close from what I remember. Could add a damper I ...

    Re: Laminate Undermounts
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/17) -- We've done a lot of these. There are generally two methods to do this. ...

    Re: new or old?
    A message posted at WOODWEB's CNC Forum (12/17) -- Small two man shop. First router I bought was used. The tech support was very poor. I ended up buy ...

    dowels
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- not sure if this is the correct forum , but it is a start, I am looking for 5000 dowels, ...

    Re: 6 hour Work Day....Is it Possible in the US?
    A message posted at WOODWEB's Business and Management Forum (12/17) -- 8 hours is a short day for me. Normally it's 9 1/2-10, I work weekends too. I ...

    Re: Shop statistics
    A message posted at WOODWEB's Business and Management Forum (12/17) -- Too many variables. How much out sourcing? 25,000', CNC, beam saw, CNC bore &a ...

    Re: Need Help with 2014 SCM Pratix S15 Handheld Controller
    A message posted at WOODWEB's CNC Forum (12/17) -- I'm not sure what you have in mind, or how good it will do, but it's not a bad idea. However, you ...

    Re: dowels
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Did you try Chicago Dowel? Chicago Dowel Co., Inc. 4700 W. Grand Ave., Chicago, IL 60639 ...

    Re: How to construct a 14' wide curved soffit
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Pat: can you get KerfKore with the veneer already applied to it? I'm not familiar with N ...

    Re: How to construct a 14' wide curved soffit
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- You would have to go to a veneer house. Or make your own using MDF core. Make sure the g ...

    Re: Long life router bits
    A message posted at WOODWEB's CNC Forum (12/17) -- Anyone trying coated bits? I'm finding the first sign of wear is chipping on the top of the sheet, ...

    Re: Servicing Brandt Gluepot
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Watlo anti seize for the elements. sealed bearings if you are taking it out and going to ...

    Re: 6 hour Work Day....Is it Possible in the US?
    A message posted at WOODWEB's Business and Management Forum (12/17) -- Sure, no problem. 6 hours a day, 7 days a week. Gives you 2 hours overtime. ...

    Re: Finishing Question
    A message posted at WOODWEB's Finishing Forum (12/17) -- If you google Lewis Ermer, you'll see his contact info among the results. You could try cont ...

    Re: vacuum newbie
    A message posted at WOODWEB's CNC Forum (12/17) -- Sure make the whole thing out of MDF and then laminate the outside, except for the top of course. ...

    Re: 6 hour Work Day....Is it Possible in the US?
    A message posted at WOODWEB's Business and Management Forum (12/17) -- 30 hours a week is part time. ...

    Re: 6 hour Work Day....Is it Possible in the US?
    A message posted at WOODWEB's Business and Management Forum (12/17) -- Funny Leo! The French do it. ...

    Re: Cabinet vision 45 degree cut
    A message posted at WOODWEB's CAD Forum (12/17) -- It's in the Help files under "Tool Catalog Setup" ...

    Re: 6 hour Work Day....Is it Possible in the US?
    A message posted at WOODWEB's Business and Management Forum (12/17) -- Go for it. ...

    Re: Veneer Failure
    A message posted at WOODWEB's Veneer Forum (12/17) -- TM, have you had a chance to strip a small drawer front? ...

    Re: Heavy Duty Concealed Hinges
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- yes ...

    Re: dowels
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Saunders Brothers ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- Rick L- My gauges are useless and they make you cringe. Got it. Thanks so much. J ...

    Re: Code For Continious Loop Machineing
    A message posted at WOODWEB's CNC Forum (12/17) -- Maybe something like this: How about something like this: All your Start Program stuff goes here.. ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/17) -- Todd, For some time we drew mostly in 3d AutoCad along with Smartlister to extrude the part inform ...

    Re: Microvellum issues/optional software
    A message posted at WOODWEB's CAD Forum (12/17) -- We have been using MV for about three years now and we did have major support issues at first. How ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- Andrew L— Much as it surprised me, when I tried a paten made the same way it didn ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/17) -- We have two aspects of our work as detailers where I work. One is the creation of construction dra ...

    Re: Large French doors
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- That photo/joint is from a door that had a complex 4" wide bolection mo ...

    Re: Large French doors
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- I can't answer your question directly since I just don't know the materials. ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/17) -- When you design in SW and I you get a 3D model that can be controlled dimensionally. Associated pa ...

    Re: Spindle shaper bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- Sounds like you may be too far along already, but I would re-think having a bunch ...

    Scroll Air Compressor- Experience?
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- I don't have a great place to put an air compressor. Even with a cabinet aro ...

    Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/17) -- Our company which has a LONG history with AutoCAD for drawing floor plans and 3D modeling for cons ...

    Re: Scroll Air Compressor- Experience?
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- I would be concerned as to how the non seized one was maintained if they are ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/17) -- As you already have AutoCad and 3dsMax, you may want to look into the AutoDesk Product Design Suit ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/17) -- Thanks, Todd. I was just having this conversation with another gentleman on Monday. I have to admi ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/17) -- Todd I used SW for 10 years, all of what you mention can be done in Auto Cad. Parametrics are a do ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/17) -- Todd I used SW from the mid 90s until about 2007. I then switched to Auto Cad in conjunction with ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/17) -- Pat Very good question. The answer is that in our line of work, there are a lot of last minute cha ...

    starting small funiture shop
    A message posted at WOODWEB's Furniture Making Forum (12/17) -- I'm retiring from my general construction business and have been building furniture f ...

    Re: Scroll Air Compressor- Experience?
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- The machine is a dual 5 hp Atlas Copco. One of the compressors is seized, bu ...

    Re: Looking for quality air sander
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/17) -- I have all the Festool sanders also and some Dynabrade ros sanders t ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/17) -- For people who use Microvellum for their back-end manufacturing, we now have a new module that can ...

    Looking for quality air sander
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/17) -- I'm looking for a quality sander that hooks up to my air line. Prefe ...

    Spindle sander
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- A pending bid is prompting me to consider an oscillating spindle sander. I would ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/17) -- It is my understanding that Cim Tech can extract data that it needs from 3D AutoCAD, as well as th ...

    Re: when can we use white oak?
    A message posted at WOODWEB's Sawing and Drying Forum (12/17) -- KP If you have a little bit of time,especially if you really like your slabs, a opti ...

    Re: Looking for quality air sander
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/17) -- http://www.amazon.com/gp/aw/d/B007VTTNP6/ref mp_s_a_1_1?qid 14188630 ...

    Re: Manual tool change SCM Tech 99
    A message posted at WOODWEB's CNC Forum (12/17) -- Thanks Guys for the reply's things got a little more complicated but I managed to remove the tool ...

    Re: Large French doors
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- Dave- I will give it a try I'm sure I can figure it out. It looks like there ...

    Re: Scroll Air Compressor- Experience?
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- I would not go any other way. What HP are you considering, what brand? They ...

    Re: Metric PVC
    A message posted at WOODWEB's CNC Forum (12/17) -- Try MSCDirect.com they usually have what I need. They have fractional and metric fitting and the t ...

    Re: Looking for quality air sander
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/17) -- Doesnt the cereos hook up to its own vac system ? Who would u recomm ...

    Re: Power Feeder
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- Thanks guys, I ordered a co-matic 4 wheel 1 hp for this table saw. I'm going ...

    Re: In reference to wide belt sanding....
    A message posted at WOODWEB's WOODnetWORK Forum (12/17) -- A person reading that statement can learn more than reading entire books on sanding. ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/17) -- How is SW or Inventor going to solve that problem? ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/17) -- there is a solid works CAM plugin. ...

    More on Steam Bending
    A message posted at WOODWEB's Furniture Making Forum (12/17) -- In the thread below, I think we all agreed that it would not be worth the time and ef ...

    Re: resawin problem
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- There is likely be no problem upgrading to a 2hp motor on the band saw. However y ...

    Re: The key to using epoxy adhesive
    A message posted at WOODWEB's Adhesives Forum (12/17) -- I don't see what the big deal is. These problems could be avoided by simply reading, underst ...

    Aluminum Straightedge
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/17) -- I am in need of an 8 ft. piece of rectangle box tubing to use as a s ...

    Re: cherry mantel
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/17) -- This is a question for your client. Since they're paying, should be ...

    finish not bonding to itself
    A message posted at WOODWEB's Finishing Forum (11/17/24) -- As part of a small trim business my Dad and I run we do our own trim pre finishing. We've ...

    Re: New direction in finishing my work
    A message posted at WOODWEB's Finishing Forum (11/17/24) -- I spray all the time without a booth. Conversion varnish. Turn on some fans, Blow out you ...

    Wood to Metal
    A message posted at WOODWEB's CNC Forum (11/17/24) -- Okay, looks like I am getting involved with a 5 axis machine made for metal with a customer of ...

    Re: finish not bonding to itself
    A message posted at WOODWEB's Finishing Forum (11/17/24) -- It must be something with the dry time on the stain cause we've shot some test samples th ...

    Re: Accuracy of Shop Drawings?
    A message posted at WOODWEB's CAD Forum (11/17/24) -- You are amazing. I should thank you for all the work you put into making this post ...

    Re: finish not bonding to itself
    A message posted at WOODWEB's Finishing Forum (11/17/24) -- Stain not dry,not combat able with top coat ...

    Re: Wood to Metal
    A message posted at WOODWEB's CNC Forum (11/17/24) -- I use the FSWizard app, it's awesome. ...

    Re: Doing spray touchup on cabinets large condo complex, 80+ condos,
    A message posted at WOODWEB's Finishing Forum (11/17/23) -- In Chicago, we used Airless Air assist..(AAA) For onsight work in places such as Sears To ...

    Re: Doing spray touchup on cabinets large condo complex, 80+ condos,
    A message posted at WOODWEB's Finishing Forum (11/17/23) -- I agree to Chemmy. AAA is not the small rig to carry for touch up but you never know what ...

    Re: Home Oven Drying 130504 DESICCANT CARTRIDGE
    A message posted at WOODWEB's Finishing Forum (11/17/23) -- Thanks, Mitch! Actually, I had the desiccant cartridge back in the canister in my spray r ...

    Re: Veneered Jamb Extension
    A message posted at WOODWEB's Veneer Forum (11/17/23) -- I wouldn't use any fiber based material, even Extira, in this situation. A good exterior har ...

    Re: Scottsdale business
    A message posted at WOODWEB's Business and Management Forum (11/17/23) -- Glen, wish you luck. Just did this with my cabinet company. Lucky for me it ...

    Re: new dust collector help
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/17/23) -- If noise and energy savings are two of your major concerns th ...

    Re: curved slab door
    A message posted at WOODWEB's Veneer Forum (11/17/23) -- As said above two or three layers of bending Luan with your veneer on either side. If you ha ...

    Re: Home Oven Drying 130504 DESICCANT CARTRIDGE
    A message posted at WOODWEB's Finishing Forum (11/17/23) -- Thank you Leo You're right I need to get an oven thermostat. When I was heating the cartr ...

    Re: Home Oven Drying 130504 DESICCANT CARTRIDGE
    A message posted at WOODWEB's Finishing Forum (11/17/23) -- As long as you keep it below 325ºF you shouldn't have issues. 225ºF is just above boiling ...

    Re: Home Oven Drying 130504 DESICCANT CARTRIDGE
    A message posted at WOODWEB's Finishing Forum (11/17/23) -- Well whatever the temp was it looks like it at least gave you more lift out of your cartr ...

    Re: Custom Cabinetry and remodeling
    A message posted at WOODWEB's Business and Management Forum (11/17/22) -- I am the exception; I have stayed small /one man & this is my second ti ...

    Re: Oiled/sealed oak mirror door bowing
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/22) -- Good morning, I will jump in here before the forum police scold you for not being a & ...

    Re: How does Make-Up air work in the winter?
    A message posted at WOODWEB's Finishing Forum (11/17/22) -- Hi Matt, All have presented valuable insight and information. Maybe in warmer times ya'll ...

    Re: Custom Cabinetry and remodeling
    A message posted at WOODWEB's Business and Management Forum (11/17/22) -- I have posted myself and seen hundreds of wannabe start up posts over the l ...

    Re: Cabinet software
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/22) -- Thanks for comments. Looking briefly into some of these programs,I'm most likely neve ...

    mdf not staying flat
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/22) -- we are in the middle of a large job with slab door's we orderd maple with an mdf core ...

    Re: CRACKED THICK VENEER REPAIR
    A message posted at WOODWEB's Finishing Forum (11/17/22) -- Tom - thanks for your feedback. I've also wondered about the bulging. The cracks are quit ...

    Re: mdf not staying flat
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/22) -- MDF is relatively stable but it still moves. Up here in Ottawa Canada if you leave fr ...

    Thick moldings
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17/22) -- Hi All We are looking at a large commercial project that requires 12/4" a ...

    Re: Pocket door hardware
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/22) -- Dam i hate that word.. i can send a job out and install and when we go back to adjust ...

    Re: Hopper for kremlin
    A message posted at WOODWEB's Finishing Forum (11/17/22) -- I use the hopper with my 10c18. It wasn't the plan...kremlin sent the hopper with the pum ...

    Re: How does Make-Up air work in the winter?
    A message posted at WOODWEB's Finishing Forum (11/17/22) -- actually if you can do math and have mechanical contractor hvac contractor, you can handl ...

    Re: Cabinet software
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/22) -- Any more recommendations anyone? $700 or less detailed design capable high quality 3d ...

    Re: CRACKED THICK VENEER REPAIR
    A message posted at WOODWEB's Finishing Forum (11/17/22) -- I'm not a fan of the elastic filler idea. It will bulge out in the summer and look awful. ...

    Re: Thick moldings
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17/22) -- Some drawings showing the profiles would help, but no way would I hang that th ...

    cnc vaccum
    A message posted at WOODWEB's CNC Forum (11/17/22) -- Hello there. I’ve been having this problem with a 5x10 laguna cnc with 2 10HP regenerative vacu ...

    Re: Custom Cabinetry and remodeling
    A message posted at WOODWEB's Business and Management Forum (11/17/22) -- I lasted 8 years and was totally burnt out. Luckily I was offered a corpora ...

    Re: Oiled/sealed oak mirror door bowing
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/22) -- Thank you for your response, and apologies if I have misused this forum. I am plannin ...

    Re: mdf not staying flat
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/22) -- Tom has it right. MDF will curl just like solid hardwood panels if the humidity rapid ...

    Re: Custom Cabinetry and remodeling
    A message posted at WOODWEB's Business and Management Forum (11/17/22) -- I'm curious how many of the "I want to start a cabinet shop" post ...

    Re: Carcase for frameless tall cab with double-oven opening
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/22) -- Not sure about ecab software we use cabinet vision we sometime use an appliance frame ...

    Re: Oiled/sealed oak mirror door bowing
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/22) -- No, plywood will not work. you are applying a mirror to only one side, it will warp. ...

    V Carve Post for Old Omnitech Selexx with Fanuc
    A message posted at WOODWEB's CAD Forum (11/17/22) -- I am looking for this post. the machine needs to be an older like 2008 Omnitech Selexx with ATC ...

    Re: Edge Bander issue ?
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/22) -- How does it feed, (pressure roller) by separate motor or chain drive from another mot ...

    Re: Cabinet software
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/22) -- Cabinet Planner.....less than $100 ...

    Red Elm Cabinet Question
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/21) -- I am a residential contractor that does cabinet building on a small scale. I have bui ...

    Melamine Shelving Supplier
    A message posted at WOODWEB's Business and Management Forum (11/17/21) -- I'm searching for a custom melamine shelving supplier, and having a tough t ...

    Re: Original manufacturer?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17/21) -- I suggest you ask at the link. With the quality of the castings, it almost loo ...

    Re: Stile and rail thickness
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/21) -- We S4S to .781 with our molder. Sand finished doors and drawer fronts with widebelt @ ...

    Re: Stile and rail thickness
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/21) -- Be careful making the doors thicker than 3/4". In some situations, the hardware ...

    Re: Melamine Shelving Supplier
    A message posted at WOODWEB's Business and Management Forum (11/17/21) -- There aren't any local shops with a cnc and edgebander? ...

    Re: Stile and rail thickness
    A message posted at WOODWEB's Cabinetmaking Forum (11/17/21) -- I start with s3s stock planed to .781. ...

    Re: Original manufacturer?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17/21) -- Trupro Machinery out of Taiwan ...

    Re: How Can I Create a wooden external wall On AutoCad
    A message posted at WOODWEB's CAD Forum (11/17) -- Sheldon, Not sure what exactly you're asking. Presumably, you know what you need to draw, and coul ...

    timber harvester
    A message posted at WOODWEB's Sawing and Drying Forum (11/17) -- I recently picked up an old timber harvester bandsaw mill and have been restoring it ...

    Re: PPB fungus
    A message posted at WOODWEB's Sawing and Drying Forum (11/17) -- Many beetles and other insects that bore into wood have a symbiotic relationship wit ...

    Re: Installing & painting moulding
    A message posted at WOODWEB's Finishing Forum (11/17) -- The U-line or any type of film mask is just a way of masking to the edge of the flooring (ag ...

    dust collector fills one bag much faster than the other
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/17) -- Powermatic 3 horse dust collector has two bags. One fills 4 or 5 ...

    Finally - A Website
    A message posted at WOODWEB's Architectural Woodworking Forum (11/17) -- I finally got a new website up. Squarespace product, with a hired designer. ...

    Re: RE: Heating System & Dust Collection
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/17) -- At Coima USA we have dusting booth and very industrial downdraft ...

    Re: Static Pressure Constant for Dust Collector
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/17) -- Our indoor dust collector can go up to 11” Mod SHK-4 HS www.coim ...

    Re: Finally - A Website
    A message posted at WOODWEB's Architectural Woodworking Forum (11/17) -- Welcome to the twentieth century! I hope the phone starts ringing constantly ...

    Re: Installing & painting moulding
    A message posted at WOODWEB's Finishing Forum (11/17) -- Thanks Mark, I understand now your suggestion, and it makes a lot of sense. ...

    Re: New Dust Collection Design
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/17) -- We at Coima USA can help ...

    Re: Finally - A Website
    A message posted at WOODWEB's Architectural Woodworking Forum (11/17) -- Time to upgrade from Windows 95? ...

    Re: floating panel paint issue
    A message posted at WOODWEB's Cabinetmaking Forum (11/17) -- Seems to me your first call should be to Sherwin's technical support, dealer can put you ...

    Re: Router specs for miter folding solid surface
    A message posted at WOODWEB's CNC Forum (11/17) -- Komo I saw recently at auction ...

    Re: Micro bubble hell
    A message posted at WOODWEB's Finishing Forum (11/17) -- The most interesting comments I found here were the one on the turbine heating up and the we ...

    Re: Micro bubble hell
    A message posted at WOODWEB's Finishing Forum (11/17) -- BH Davis, your comments make a lot of sense. Jeff at TC said that red oak was about the wors ...

    Mozaik CNC compatible with Weeke BHX055
    A message posted at WOODWEB's CNC Forum (11/17) -- Hi I was wondering if anyone has used Mozaic- CNC-complete to create and send gcode directly to a ...

    Re: Maintenance coat for verde products
    A message posted at WOODWEB's Finishing Forum (11/17) -- Not being familiar with Verde, all I could think of for a cut and roll application would be ...

    Re: Restoration Hardware
    A message posted at WOODWEB's Finishing Forum (11/17) -- Most people should be able to compete with some of their designs. Others maybe not. I can te ...

    will this work?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/17) -- I just scored a 5hp regenerative vacuum motor for free. I'd like ...

    Re: Mozaik CNC compatible with Weeke BHX055
    A message posted at WOODWEB's CNC Forum (11/17) -- Hi Robb, thanks for the reply. Thats good to know. I assume your machine and the BHX both run on W ...

    Re: shop rental rates for employees
    A message posted at WOODWEB's Business and Management Forum (11/17) -- I think my concern would be the legalities of him getting hurt, if all that is ...

    Re: Mozaik CNC compatible with Weeke BHX055
    A message posted at WOODWEB's CNC Forum (11/17) -- We run a Homag BOF211. We subscribed to Mozaik prior to installation. Got somewhat used to it prio ...

    Re: Upgrding Biesse from windows 7 to windows 10
    A message posted at WOODWEB's CNC Forum (11/17) -- Agreed. A better use of your time would be replacing your hard drive with a SSD .With a HD after 3 ...

    Re: Table/leg finishing
    A message posted at WOODWEB's Furniture Making Forum (11/17) -- I would use the same finish on both the top and bottom of the top, so that moisture e ...

    Re: Lighting for a Cabinet Making / Furniture Making Shop
    A message posted at WOODWEB's Cabinetmaking Forum (11/17) -- Built a 2400 square foot shop in 2013. I used a 4' fixture with T-5 bulbs. These fixture ...

    Re: parts for omal c pneumatic hinge borer
    A message posted at WOODWEB's Cabinetmaking Forum (11/17) -- Harold, Do you know Robert, our Florida territory manager? I have contacted him about th ...

    Re: Edge Banding question
    A message posted at WOODWEB's Cabinetmaking Forum (11/17) -- It's a dust seal/stop. Profiles differ but there is a link to an example here. ...

    Re: Cabinetshop management question
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Great topic about how to manage a shop. My cabinet component shop has had high ...

    Re: Does Lean work on a construction site?
    A message posted at WOODWEB's Business and Management Forum (11/17) -- We were doing a major retailers rollouts a few years ago, their lean/JIT progr ...

    Re: Does Lean work on a construction site?
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Pat, I am sure Lean can work on a construction site to some extent. It may imp ...

    Re: 1995 morbidelli author 504 1995
    A message posted at WOODWEB's CNC Forum (11/17) -- Not necessarily. http://www.cnczone.com/forums/cnc-machining-centers/72429-morbidel li-author-504k ...

    Re: laminating press Mylar alternatives
    A message posted at WOODWEB's Adhesives Forum (11/17) -- Michael, Unfortunately there isn't an alternative you can use. The Mylar is the thinnest mat ...

    Re: Programs to Draw Furniture Designs
    A message posted at WOODWEB's Furniture Making Forum (11/17) -- I will second Sketchup for anything from a one off furniture piece all the way up to ...

    Re: Does Lean work on a construction site?
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Pat, Certainly 5S would be in improvement. Lean/TPS is a process of continuous ...

    Re: laquer blushing
    A message posted at WOODWEB's Finishing Forum (11/17) -- Do some reading on Acid Bloom. common mistake for people not paying close attention to their ...

    Re: waste wood recycling and processing
    A message posted at WOODWEB's Value Added Wood Processing Forum (11/17) -- Wood is actually the Co2 of your granddad ! Those trees have reworked it t ...

    Re: Does Lean work on a construction site?
    A message posted at WOODWEB's Business and Management Forum (11/17) -- That sounds good in theory, but if it was really useful wouldn't developers be ...

    waterbase glaze
    A message posted at WOODWEB's Finishing Forum (11/17) -- I need to make WATERBASE glaze. Is there a better formula than using propylene glycol and wa ...

    Re: Phantom Lines
    A message posted at WOODWEB's CNC Forum (11/17) -- Mikeala, When you are holding down the veneer on the spoil board with vacuum. The veneer is being ...

    Re: Martin Technician
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Read, Typically Martin USA can help you figure out what the problem is over th ...

    Re: Urban Wood, Anyone
    A message posted at WOODWEB's Value Added Wood Processing Forum (11/17) -- We are circular woodworkers for 17 years now . That doesn't mean we only m ...

    Phantom Lines
    A message posted at WOODWEB's CNC Forum (11/17) -- When cutting White Oak veneer on K3 the bottom side gets lines in it that match up with the lines ...

    Re: Does Lean work on a construction site?
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Lean wouldn't work on a jobsite for the same reason Lean wouldn't work in a ma ...

    Re: Oxalic removed stains returning
    A message posted at WOODWEB's Finishing Forum (11/17) -- After removing the crystals via real warm water and a Maroon Scotch-Brite Pad,once the surfa ...

    Re: Phantom Lines
    A message posted at WOODWEB's CNC Forum (11/17) -- Dropout - there is a reason it is called a spoil board...... We fly cut (re-surface) the the spoil ...

    Does Lean work on a construction site?
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Because it is not a highly controlled environment? The variables are huge. ...

    Re: Spray Booth Heaters
    A message posted at WOODWEB's Finishing Forum (11/17) -- Modine Hot Dawg's are great. I used to heat my small shop with one of those. ...

    Re: 1995 morbidelli author 504 1995
    A message posted at WOODWEB's CNC Forum (11/17) -- I was seduced by the low bid amount. Not a good business decision on my part ...

    Re: Phantom Lines
    A message posted at WOODWEB's CNC Forum (11/17) -- I know, I do the same. But when it's really cut, there shouldn't be any lines. ...

    Re: Does Lean work on a construction site?
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Alan Was it sucessful? ...

    Re: Oxalic removed stains returning
    A message posted at WOODWEB's Finishing Forum (11/17) -- I’ll do that. Thanks for the advice. ...

    NC Hops
    A message posted at WOODWEB's CAD Forum (11/17) -- Anybody here use NC Hops? I could really use some help. ...

    Re: Phantom Lines
    A message posted at WOODWEB's CNC Forum (11/17) -- Shouldn't have lines on the spoilboard.... ...

    Re: customer profile and info form
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Hi Aaron You just explained my exact predicament, only difference is that I do ...

    Business growing
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Hello All Wonder if I can get some advice/help from the experts about my busin ...

    Re: Spray Booth
    A message posted at WOODWEB's Finishing Forum (11/17) -- Scott, You require a heater based on the cfm that your fan for your booth is removing. The s ...

    Re: Andi Genesis Evo CNC
    A message posted at WOODWEB's CNC Forum (11/17) -- Hi Doug Bought a 9x4 genesis evo 49 6 months ago. 12 tool changer 17 drilling head load/unload bus ...

    Re: Business growing
    A message posted at WOODWEB's Business and Management Forum (11/17) -- No Eddie, that is the first time I have heard of this problem. Just kidding, s ...

    Re: Cutting wine rack lattice safely and efficiently
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- I would figure out the bandsaw issue. We cut these quite a bit and have found tha ...

    End Boring options
    A message posted at WOODWEB's CNC Forum (11/17) -- We are considering the purchase of an end boring machine. Our experience with OMAL has had its iss ...

    Re: static build up in dust shoot
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/17) -- after reading some of the knowledge base responses , i took a sq ...

    Re: Dowels pulling out
    A message posted at WOODWEB's Cabinetmaking Forum (11/17) -- Coating the hole with glue is a must. Try another brand of dowels. We use excel dowels 8 ...

    Re: Rub Through Schedule
    A message posted at WOODWEB's Finishing Forum (11/17) -- Leo, Sherwin Williams has a clear surface/primer that can be tinted to any color. Its great ...

    Re: Dowels pulling out
    A message posted at WOODWEB's Cabinetmaking Forum (11/17) -- Not familiar with schneeburger but we use a pizzi applicator on the face side and it put ...

    Re: Business growing
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Outsource the finishing, or order the parts prefinished. Some climate controll ...

    Re: Water based finish on natural red oak
    A message posted at WOODWEB's Finishing Forum (11/17) -- Try GF's light brown dye diluted roughly 4-1 with H20. Add a 1/2 ounce+/- of GF orange dye p ...

    Re: Spray booth size
    A message posted at WOODWEB's Finishing Forum (11/17) -- Most open faced booths in cabinet shops are designed for a cfm of the square footage of the ...

    Re: Cutting wine rack lattice safely and efficiently
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- Thanks guys, we're going to try this with the Festool trak saw. We have a couple ...

    Re: Dowels pulling out
    A message posted at WOODWEB's Cabinetmaking Forum (11/17) -- We fight that as well. A couple pocket screws help when you can hide them, or we do as t ...

    Re: Water based finish on natural red oak
    A message posted at WOODWEB's Finishing Forum (11/17) -- you guys are going to kill me, I've had good results spraying with minwax polycrylic satin, ...

    Re: 8/4 redoak
    A message posted at WOODWEB's Sawing and Drying Forum (11/17) -- There is a specific schedule for 8/4 red oak that works very well. See DRYING HARDWO ...

    Re: Exterior MDF
    A message posted at WOODWEB's Architectural Woodworking Forum (11/17) -- Last time we bought 3/4" 4x8 Medex it was $39.84 a sheet here in San Di ...

    Re: Business growing
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Man, whoever has been running this country the past 8 years has really got the ...

    Re: Business growing
    A message posted at WOODWEB's Business and Management Forum (11/17) -- In spite of not because of. ...

    Re: Sliding table saw parts swap.
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- Congratulations!! ...

    Re: Yearly gross dollar output per employee
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Cabmaker2 You're delving into minutiae I just asked a basic question. Fall off ...

    Re: How Many Hinges Per Door?
    A message posted at WOODWEB's Cabinetmaking Forum (11/17) -- Mike, I agree that the 2 formulas seem to fight each other. Over the years, some Salice ...

    Re: Yearly gross dollar output per employee
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Cabmaker2 To be honest, my initial question was just a curiosity, not a means ...

    Re: Sketchup to Xilog Maestro
    A message posted at WOODWEB's CNC Forum (11/17) -- In the United States, all the Pratix S machines are sold with a pc connected directly to the machi ...

    Re: paperless alternatives
    A message posted at WOODWEB's Business and Management Forum (11/17) -- that is some serious reporting! About 3 months ago we made the leap from shop ...

    Re: Determining Vacuum Holddown
    A message posted at WOODWEB's CNC Forum (11/17) -- I'd like to see someone actually hold "9.5" x 3.5" and 2" x 3.5" pieces&q ...

    Veneering a bullnose
    A message posted at WOODWEB's Veneer Forum (11/17) -- I use my vac bags for laminating curved panels and have little to no experience with applying v ...

    Re: Jointing a bundle of veneer with a Festool track saw?
    A message posted at WOODWEB's Veneer Forum (11/17) -- Here are some photos of how I cut veneer. The setup is very simple and I always threaten to imp ...

    Re: Glue line quality
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Results: After 2+ days of cure, the sample was cut square, some molding steel ...

    Re: Yearly gross dollar output per employee
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Cabmaker, I wasn't proposing that you spend any time on minutia. My specific o ...

    Re: Flooring with Circle Saw Milling Marks
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- Circular sawn flooring is pretty much a hit or miss floor so side match..there wi ...

    Flooring with Circle Saw Milling Marks
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- Hi there! We make custom hardwood flooring (up to eight inches wide), and have be ...

    Re: Euro hinges
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/17) -- Hillary - as Dennis suggests, check Rockler, not only for the sales ...

    Re: Floor Finishing Problems
    A message posted at WOODWEB's Finishing Forum (11/17) -- " wiping down " a thick coat of poly/varnish with mineral spirits will do little t ...

    Re: storing wood outside in a shipping container
    A message posted at WOODWEB's Architectural Woodworking Forum (11/17) -- In almost all of North America, the outside humidity, summer and winter, is ...

    Re: Sanding MDF for paint
    A message posted at WOODWEB's Finishing Forum (11/17) -- Yup, Kevin is right, you can find the specs for ML products online, print them out and hand ...

    Re: Sanding MDF for paint
    A message posted at WOODWEB's Finishing Forum (11/17) -- 320 on the compressed face of MDF is not necessary at all. I do often use 320 for the edges ...

    adjusting cabinet color
    A message posted at WOODWEB's Finishing Forum (11/17) -- I just finished and installed a set of cherry cabinets. I used a dye stain than stained with ...

    Re: Storing cabinets over the winter
    A message posted at WOODWEB's Cabinetmaking Forum (11/17) -- Glad that you came to a decision that works for you mate! I know the thread is closed, b ...

    Sanding MDF for paint
    A message posted at WOODWEB's Finishing Forum (11/17) -- We use MDF for painted slab doors and cabinets. Our finisher insists on sanding the faces of ...

    Re: paperless alternatives
    A message posted at WOODWEB's Business and Management Forum (11/17) -- We use 4 shop floor PCs in simple enclosures. Employees log in & out of jo ...

    Re: Determining Vacuum Holddown
    A message posted at WOODWEB's CNC Forum (11/17) -- I regularly cut pieces as small or smaller that what is suggested. I use a 10 hp regen pump for va ...

    Re: storing wood outside in a shipping container
    A message posted at WOODWEB's Architectural Woodworking Forum (11/17) -- I'm not too sure whether you can get an air conditioner unit installed into ...

    Re: Determining Vacuum Holddown
    A message posted at WOODWEB's CNC Forum (11/17) -- We have a 40hp on a 5x10 table. The cut sheet you show would be no problem, but I might cut the li ...

    Re: Determining Vacuum Holddown
    A message posted at WOODWEB's CNC Forum (11/17) -- James - I am realizing that there may be no way around onion skinning the smaller pieces. The PDF ...

    Re: Euro hinges
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/17) -- As I look around the room and at two kitchen jobs I did I have repla ...

    Decorative edging for headboards
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/17) -- Hello, I'm working on a project and looking for trim or edging to go on ...

    Re: Sanding MDF for paint
    A message posted at WOODWEB's Finishing Forum (11/17) -- sanding that high will cause adhesion issues. your instincts are correct. we sand to 150 bef ...

    Re: adjusting cabinet color
    A message posted at WOODWEB's Finishing Forum (11/17) -- +1 on the Mohawk They have various toners you can choose from. If it's just small areas,I wo ...

    Re: paperless alternatives
    A message posted at WOODWEB's Business and Management Forum (11/17) -- hey Gary, i was looking at the Surface pro myself already, the look pretty goo ...

    paperless alternatives
    A message posted at WOODWEB's Business and Management Forum (11/17) -- hi, anyone using a paperless alternative in there shop for cutting lists,cabin ...

    Re: Determining Vacuum Holddown
    A message posted at WOODWEB's CNC Forum (11/17) -- I probably should have looked at your pdf,, Mine will cut that all day long yet it is best to OS t ...

    Re: paperless alternatives
    A message posted at WOODWEB's Business and Management Forum (11/17) -- We use Microvellum, and ShopPak from tradesoft. We have the PC Data Collection ...

    Re: Determining Vacuum Holddown
    A message posted at WOODWEB's CNC Forum (11/17) -- 2 CNC here, one with 25hp and one with 15 hp regen blowers, Both nest very well yet I trust neithe ...

    Re: moisture, heat and lignin
    A message posted at WOODWEB's Sawing and Drying Forum (11/17) -- Click on "bent wood" in the first paragraph of our home page and you will ...

    Re: adjusting cabinet color
    A message posted at WOODWEB's Finishing Forum (11/17) -- Mohawk has spray aerosols that I always used to get the color I want. The problem is this is ...

    Re: ERP
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Hi Onkar, I'm not really sure. I guess it depends on how it fits your workflow ...

    Re: paperless alternatives
    A message posted at WOODWEB's Business and Management Forum (11/17) -- PCs don't seem to mind the dust. We open ours about once a year and shovel the ...

    Re: Determining Vacuum Holddown
    A message posted at WOODWEB's CNC Forum (11/17) -- What type of router are you looking at? What ideas do you have for a vacuum table grid? If you lik ...

    Re: Determining Vacuum Holddown
    A message posted at WOODWEB's CNC Forum (11/17) -- George - Thanks, I am going to consider gasketing the pieces that are standard production runs. La ...

    Re: moisture, heat and lignin
    A message posted at WOODWEB's Sawing and Drying Forum (11/17) -- Extreme bending is possible with amp is treated wood. After treatment there is no od ...

    Re: Sanding MDF for paint
    A message posted at WOODWEB's Finishing Forum (11/17) -- Well, that explains why my finisher doesn't like blue tape; he says it's too sticky an pulls ...

    Re: paperless alternatives
    A message posted at WOODWEB's Business and Management Forum (11/17) -- The dust is an issue with moving parts but not a problem otherwise. ...

    Re: moisture, heat and lignin
    A message posted at WOODWEB's Sawing and Drying Forum (11/17) -- No ammonia used in bending those pieces shown at our website. LOL ...

    Re: Flooring with Circle Saw Milling Marks
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- Here is something to start with. ...

    Re: moisture, heat and lignin
    A message posted at WOODWEB's Sawing and Drying Forum (11/17) -- Should say "possible wiith ammonia" ...

    Re: Determining Vacuum Holddown
    A message posted at WOODWEB's CNC Forum (11/17) -- Jim - that sounds pretty good. Thank you. ...

    Re: Determining Vacuum Holddown
    A message posted at WOODWEB's CNC Forum (11/17) -- Snaglpuss - what model vacuum do you run? ...

    Re: curved stair handail questions for professionals
    A message posted at WOODWEB's Architectural Woodworking Forum (11/17) -- Wonderful drawings as usual Steve and your finished products as well. I gues ...

    Choosing right planer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- I need advice on choosing the correct planer for my situation. I am not a seasone ...

    Re: MDF Door options
    A message posted at WOODWEB's CNC Forum (11/17) -- I have been selling machinery for 14 years to the woodworking industry. I have not made 1 penny of ...

    Re: Gorilla glue, just curious
    A message posted at WOODWEB's Adhesives Forum (11/17) -- First, as I stated before, there are many PUR adhesives. At this time, you have one choice a ...

    Re: curved stair handail questions for professionals
    A message posted at WOODWEB's Architectural Woodworking Forum (11/17) -- Dan, I have a pretty good collection of old stairbuilding books, I find I un ...

    Re: MDF Door options
    A message posted at WOODWEB's CNC Forum (11/17) -- Hey Dropout, You're funny. Actually, I dropped out of high school myself 6 weeks before graduation ...

    Re: Gorilla glue, just curious
    A message posted at WOODWEB's Adhesives Forum (11/17) -- I have done a bit of woodwork in the past but not on the level with you guys. I damaged my 1 ...

    Re: MDF Door options
    A message posted at WOODWEB's CNC Forum (11/17) -- Hey Dropout, I have 3 questions for you: 1. You were thinking about purchasing either the Biesse o ...

    "Structural" Cypress
    A message posted at WOODWEB's Architectural Woodworking Forum (11/17) -- We have project that a structural engineer has spec'ed a Structural cypress ...

    Re: quick drawer front alignment
    A message posted at WOODWEB's CAD Forum (11/17) -- I use cabinet vision. We drill the boxes for the handles on the cnc. We also have an intellijoint ...

    Re: cnc camparison
    A message posted at WOODWEB's CNC Forum (11/17) -- A good friend just bought a Biesse skill with the full auto load unload set up. We were talking ma ...

    Re: MDF Door options
    A message posted at WOODWEB's CNC Forum (11/17) -- Please accept my apologies Scott. This was my experience from about 7 years ago involving our soft ...

    Re: curved stair handail questions for professionals
    A message posted at WOODWEB's Architectural Woodworking Forum (11/17) -- Steve, What is the source of your images? What software to do the 3-D? Is th ...

    Re: Blades for sliding table saw
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- We use: Hardwood blade Leitz 58057 300 x 3,2 / 2,2 x 30 HW Z48/19,63 $109 Plywood ...

    Re: Choosing right planer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- Take it to someone with the right equipment. To make proper siding it probably ne ...

    Re: MDF Door options
    A message posted at WOODWEB's CNC Forum (11/17) -- Out of curiosity Scott, what machinery company do you work for? It is very good to hear what you s ...

    Re: Anyone know who makes this ancient dust collector?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/17) -- Agree with David - It looks to me like the whole thing is backwa ...

    Re: MDF Door options
    A message posted at WOODWEB's CNC Forum (11/17) -- Hi Frank. I already have both machines. I have not decided on software yet. I didn't finish high s ...

    Re: MDF Door options
    A message posted at WOODWEB's CNC Forum (11/17) -- Apparently Biesseworks won't work on my machine because it has an OSAI control. G code only. ...

    Re: If you were to do it all over again?
    A message posted at WOODWEB's WOODnetWORK Forum (11/17) -- Jalvis, I agree with what the others have already said, except for mark's one comment abou ...

    Re: Wood waste for heat
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/17) -- My Bio Heat outdoor wood boiler seems to be pretty efficient . T ...

    Re: Wood waste for heat
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/17) -- Do you use melamine or MDF as well? ...

    Contact cement
    A message posted at WOODWEB's Veneer Forum (11/17) -- Do any of you guys us contact cement to stick wood backed veneers on mdf or plywood? We r an ar ...

    Re: Adhesive for solid phenolic.
    A message posted at WOODWEB's Adhesives Forum (11/17) -- here it is ...

    Re: My sawdustburner
    A message posted at WOODWEB's Value Added Wood Processing Forum (11/17) -- I've wanted to do the heated water thing for a while. If I would have had ...

    Re: My sawdustburner
    A message posted at WOODWEB's Value Added Wood Processing Forum (11/17) -- Well it will be good with the coming winter. I'm actually getting ready to ...

    Interior Firewood Box
    A message posted at WOODWEB's Furniture Making Forum (10/17/25) -- I'm building a really nice firewood box for a long time client of mine. The exteri ...

    Re: scm pratix s15
    A message posted at WOODWEB's CNC Forum (10/17/25) -- You locked up the spindle. If it has a cartridge, you can replace it yourself. If not, you will ...

    Re: Scraping 1mm pvc w/ edgebander?
    A message posted at WOODWEB's Cabinetmaking Forum (10/17/24) -- Our bander has a multiple size trimer and scraper cutters. Trimer has 0.5(not a radiu ...

    Re: lamello zeta
    A message posted at WOODWEB's Cabinetmaking Forum (10/17/23) -- Good morning, The P-System is a very versatile system for both face frame installatio ...

    Re: 3-Phase converter lesson
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17/23) -- My rotary phase converter will run up to a 7.5 hp motor or a smaller hp m ...

    Re: 3-Phase converter lesson
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17/23) -- On are related surprising note I ran the 15 hp main motor (plus belt driv ...

    How to increase the company's turnover
    A message posted at WOODWEB's Business and Management Forum (10/17/23) -- I am a manufacturer of colored laminated wood, our products can make crafts ...

    Re: In house door makers: What 1 piece of equipment increased your efficien
    A message posted at WOODWEB's Cabinetmaking Forum (10/17/23) -- Andy, I am definitely considering this. What glue do you guys use? i use titebond 1 b ...

    Re: How to increase the company's turnover
    A message posted at WOODWEB's Business and Management Forum (10/17/23) -- Have you identified your potential customers? Why aren't they buying from y ...

    Re: capinet vision report
    A message posted at WOODWEB's Cabinetmaking Forum (10/17/22) -- I looked at your pic closer and understand what you're asking now. You want the infor ...

    Re: sticker eastern red cedar?
    A message posted at WOODWEB's Sawing and Drying Forum (10/17/22) -- Eastern Red Cedar is pretty dang stable right out of the log. I wouldnt say its d ...

    Sprayroom optimization
    A message posted at WOODWEB's Finishing Forum (10/17/22) -- I am a Finishing Mgr for a good sized company in CT that specialize in HG. we use a screw ...

    Re: cnc machine
    A message posted at WOODWEB's CNC Forum (10/17/22) -- depends on what theyre asking. and if it was properly maintained, I sold a Biesse rover 7.40 (2 ...

    Re: Teaching sanding
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17/22) -- im not sure about the size of your business but have you considered autom ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (10/17/22) -- I agree with the others, that you're overthinking it. But, if you want the ultimate peace ...

    Adhesive to make PSA sand discs
    A message posted at WOODWEB's Adhesives Forum (10/17/22) -- I just discovered a large stack of sand discs paper backed, is there an adhesive we can u ...

    Re: Sprayroom optimization
    A message posted at WOODWEB's Finishing Forum (10/17/22) -- What air filtering system do you have? Are you up to date with maintenance with the dryer ...

    Re: Tip size for kremlin
    A message posted at WOODWEB's Finishing Forum (10/17/22) -- yes, the black microscreen, if your doing narrow stuff like 06 -074 with a white tip seal ...

    Re: capinet vision report
    A message posted at WOODWEB's Cabinetmaking Forum (10/17/22) -- Thank you very much for your time Mr. Jared I will try this way Thanks ...

    Re: Sliding panel Saw
    A message posted at WOODWEB's Cabinetmaking Forum (10/17/22) -- I have a 25 year old martin slider. Never had any problems with it. ...

    Re: Rustic alder melamine
    A message posted at WOODWEB's Cabinetmaking Forum (10/17/22) -- I don't think its close enough. It has more of a reddish tone. ...

    Re: Which shoe molding use in my kitchen cabinet
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17/22) -- Those two minutes are gone forever.... ...

    Re: capinet vision report
    A message posted at WOODWEB's Cabinetmaking Forum (10/17/22) -- i have do xoptimizer But it doesn't have the format I want . ...

    Re: Sliding panel Saw
    A message posted at WOODWEB's Cabinetmaking Forum (10/17/22) -- Thanks Guys, I think Martin is the way to go as well. ...

    Re: capinet vision report
    A message posted at WOODWEB's Cabinetmaking Forum (10/17/22) -- Buy the core program and xOptimizer. ...

    Engineer - drafter
    A message posted at WOODWEB's Business and Management Forum (10/17/21) -- Hello. I have 3. questions. 1. How do you find quality millwork/cabinets en ...

    Re: Cost of a RP door
    A message posted at WOODWEB's Business and Management Forum (10/17/21) -- TY Dennis for answering the question. I have no interest in doing one secon ...

    Need millwork/cabinet engineer
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/17/21) -- Hello. What is your best methods to hire engineer/drafter for you ...

    Re: tax deduction for church cabinets
    A message posted at WOODWEB's Business and Management Forum (10/17) -- In the past I’ve always just invoiced the church for the full amount and then ...

    Re: Acrastrip pump flush
    A message posted at WOODWEB's Finishing Forum (10/17) -- Yes the aircraft simple green. To remove old finish I mix slightly less than half and half. ...

    Re: Delta saw lock knobs
    A message posted at WOODWEB's WOODnetWORK Forum (10/17) -- Yes. I've had that Craftsman saw for 40+ years. Doens't get used much which is why it's tu ...

    Re: Corrugated Head for Router
    A message posted at WOODWEB's CNC Forum (10/17) -- Check out the Whitehill options. They have a large selection of CNC tooling with replaceable knive ...

    Re: Milesi Waterbourne
    A message posted at WOODWEB's Finishing Forum (10/17) -- I spoke with a technical guy at Milesi. One of the issues it seems that I am having is my re ...

    Anyone spraying Turino from MLC?
    A message posted at WOODWEB's Finishing Forum (10/17) -- Looking for information from anyone that's spraying MLC's Turino pigmented conversion varnis ...

    Re: Which is the best woodworking software program?
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- There are many woodworking software is in the top list like Solid works, Aut ...

    Re: Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Never had pre-mill edgebander so I'm curious to know - what about pre-mill cutter in the ...

    Re: Cyclone Exhaust Questions?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/17) -- Dust collection systems should be engineered to get the most ban ...

    Re: Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- To answer your question on premill yes. If you ever go to CNC you can run your bits a lo ...

    Re: Which is the best woodworking software program?
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- FWIW The most popular is Cabinet Visioin for residential work The most popul ...

    Help with Indian Drafting Company
    A message posted at WOODWEB's CAD Forum (10/17) -- Hi, This is my first post as I was advised to ask this question here in hopes someone can help me ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/17) -- just remember the internet is full of experts. everyone's a genius in their own mind and the ...

    Re: Cancelled Project
    A message posted at WOODWEB's Business and Management Forum (10/17) -- Thanks for all the feedback regarding the post. Here is how I handled it: I ad ...

    Re: Help with Indian Drafting Company
    A message posted at WOODWEB's CAD Forum (10/17) -- You stumbled into the classic outsourcing blunder that gave offshore outsourcing such a bad name 1 ...

    Re: Autocabinets
    A message posted at WOODWEB's CAD Forum (10/17) -- Thanks, DJ and Dennis! I have not made my mind up as of yet. Like I've said the top choices are be ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/17) -- Never ceases to amaze me- cabinetmakers it's frameless vs framed, or making your own doors v ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/17) -- Bart....I guess you've never experienced the monotony of shooting a bookcase or built in wit ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/17) -- Like most of the above, I suggest you spend the cash and buy an AAA system. Kremlin gets tou ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/17) -- more than one way to skin a cat Bart...... I can hold my own when it comes to my profession. ...

    Re: Mozaik
    A message posted at WOODWEB's CAD Forum (10/17) -- We tried Mozaik a little over a year ago. My main cabinet designer was not very impressed with the ...

    Re: Need Help with a problem
    A message posted at WOODWEB's Business and Management Forum (10/17) -- You mentioned some dangerous issues regarding the electrical in the shop. This ...

    Re: Water Based Stains and Topcoats
    A message posted at WOODWEB's Finishing Forum (10/17) -- Hi Jarrod As a chemist formulator I love WB products , so for me it is difficult to say bad ...

    Re: Autocabinets
    A message posted at WOODWEB's CAD Forum (10/17) -- Are there any 2018 user reviews on Autocabinets. I'm not even sure how to find a year date on this ...

    Re: Autocabinets
    A message posted at WOODWEB's CAD Forum (10/17) -- Between KCD and Mozaik, I think the difference comes down to how you build your Cabinets. I have h ...

    15-1 kremlin EOS
    A message posted at WOODWEB's Finishing Forum (10/17) -- Hey everyone, I made a huge mistake by not cleaning out my gone after I sprayed Isolant. I d ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/17) -- I have to agree about buying the best equiptment for spraying finishes. Its the only thing y ...

    Re: Autocabinets
    A message posted at WOODWEB's CAD Forum (10/17) -- Thanks Dennis! I like a lot of about KCD and had it narrowed down between them and Cabinet Vision. ...

    Re: Autocabinets
    A message posted at WOODWEB's CAD Forum (10/17) -- Ken, Let me just say this. When I upgraded to the KCD CNC Commander it took just a few phone calls ...

    Water Based Stains and Topcoats
    A message posted at WOODWEB's Finishing Forum (10/17) -- Hi everyone, I work for a small coatings company that produces stains and topcoats. Our cust ...

    Re: Insert rabbeting cutter
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- David, If the knives are straight and tilted it will cut a convex face. It i ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/17) -- Mark, I was impressed with the Agaubarnice 2k back in 2007. Light years ahead of anything I ...

    Need Help with a problem
    A message posted at WOODWEB's Business and Management Forum (10/17) -- I am working for a shop That is unsafe. He is a good person but will not spend ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/17) -- And you're still going to need a couple of gravity guns for shooting stain and touch up or s ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/17) -- Hello I totally agree with Shane. I'm using the the Kremlin 15-25 AAA pump for SW Kem Aqua p ...

    Re: Scissor lift table
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- We've got a 5,000# lift at the beam saw, 2 - 2500# lifts bought new, in assembly and 2 - ...

    Re: Flatline
    A message posted at WOODWEB's Finishing Forum (10/17) -- Hello Dan It is not difficult, it is easier than the spray gun, because all you have to do i ...

    Re: Powder coat
    A message posted at WOODWEB's Finishing Forum (10/17) -- Then try Sherwin Williams Waterbased Precatalyzed Epoxy. It's more like a wall paint in term ...

    Re: Autocabinets
    A message posted at WOODWEB's CAD Forum (10/17) -- Ken, My advise to you is to make Autocabinets prove to you and show you everything that you are ex ...

    Re: Need Help with a problem
    A message posted at WOODWEB's Business and Management Forum (10/17) -- Several options I'd think- Quit Turn him into authorities Get other employees ...

    Melamine glue, Water proof?
    A message posted at WOODWEB's Adhesives Forum (10/17) -- I need to glue cypress for thickness to use on a porch railing. Would melamine glue work? It ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/17) -- Adam, Yes; absolutely more issues with the 2k. Full gear without a doubt. Thankfully at the ...

    Re: Cancelled Project
    A message posted at WOODWEB's Business and Management Forum (10/17) -- Chad, You should have an installation floater that would pay you for your good ...

    Flatline
    A message posted at WOODWEB's Finishing Forum (10/17) -- I’ve been finishing about 20yrs now, never did any flatline work a lot of jobs now ask for t ...

    Re: Cancelled Project
    A message posted at WOODWEB's Business and Management Forum (10/17) -- Have an honest discussion with teh contractor and come to a compromise for you ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/17) -- @brewster I have use an AAA Really like it! I most likely will invest in one of them if I ge ...

    Re: 15-1 kremlin EOS
    A message posted at WOODWEB's Finishing Forum (10/17) -- Hi Mike you will have to change some part of your pump, prepare to spend some US bills becau ...

    Re: Melamine glue, Water proof?
    A message posted at WOODWEB's Adhesives Forum (10/17) -- Melamine glue is designed for one non porous and one non-porous surface. I don't think it's ...

    Re: Wood Filler with laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/17) -- Bondo is the only way to go. Don't waste your time with anything else ...

    Re: Delta Unisaw Low voltage switch
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- All of the electrical supply houses will have them. Simple to install. ...

    Re: Cabinet hinge suggestion
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/17) -- can you post a picture or a drawing or a link to a drawing ? ...

    Re: Face frames
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/17) -- Nailing through the face frames would make me and my customers screa ...

    Re: flip up door stays
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- I think Aventos are overrated I would use the ones from Hafele or similiar ...

    Re: Flatline
    A message posted at WOODWEB's Finishing Forum (10/17) -- check out AWFI. they have different courses and a lot of different equipment. ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/17) -- Mastercabin have you used a AAA? Always different from the non users lol ...

    Re: flip up door stays
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Thanks for the responses! Just what I was looking for. ...

    Re: Flatline
    A message posted at WOODWEB's Finishing Forum (10/17) -- I will check it out thanks ...

    Re: Lean Grocery Stores
    A message posted at WOODWEB's Business and Management Forum (10/17) -- I don't think this thread is so much about slick marketing as it is about how ...

    DO NOT use PVC duct for dust collection
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/17) -- DO Not, Do not, Do not! I tried using 4 and 6 inch PVC tube and ...

    Re: How Is This Door Made?
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- For some reason this project of yours has been sticking in my head. I'm work ...

    Re: How Is This Door Made?
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- The door I am to build (?) will go from Indiana to Oklahoma. Not sure of the ...

    Re: Lean Grocery Stores
    A message posted at WOODWEB's Business and Management Forum (10/17) -- DS, My comments are primarily based on the original assumption on how products ...

    Re: Lean Grocery Stores
    A message posted at WOODWEB's Business and Management Forum (10/17) -- We started getting some groceries from a farm to table dealer that delivered o ...

    Re: Why switch to drawing everything 3D?
    A message posted at WOODWEB's CAD Forum (10/17) -- We draw completely in 3D and as an aside to the OP Im wondering what those of you who do draw in 3 ...

    Re: 1/8" lumber veneer S2S?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/17) -- We do not do any glue up that thin. However, we do run 4/4 stock throug ...

    Shelf life of PVC edgeband?
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- I've been discussing PVC (0.5mm) edgeband shelf life with a handful of folks, including ...

    Re: 1/8" lumber veneer S2S?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/17) -- We rip our boards with a Diehl saw, resaw the boards with the Baker. Ba ...

    Wires through back of cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Hello, I'm designing TV cabinet for a client. I'm using a 1/2" back. There are vari ...

    Re: Lean Grocery Stores
    A message posted at WOODWEB's Business and Management Forum (10/17) -- The word is mercantilism. Mostly because cronies wouldn't allow it, the Chines ...

    Re: Door Rotisserie
    A message posted at WOODWEB's Finishing Forum (10/17) -- Josh, every time I need to finish a door, I think about something like this. In all honesty, ...

    scissor lift for old type tv cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Outwater Hardware now Richaleau use to sell a scissor lift for lifting the old style tv' ...

    Cabinet Installer Pricing
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/17) -- Hey guys, just curious to know what is the going rate for " per ...

    Re: Veiling Lacquer
    A message posted at WOODWEB's Finishing Forum (10/17) -- Thank you so much guys for all the responses. You guys rule. This helps a lot. Dan, melting ...

    Re: Wires through back of cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- I don't do a lot of these, but for mine I used two backs, overlapped ad staggered them. ...

    Re: heavy duty shelf pins
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- I have used the 5mm magic wire supports that Alan mentions and they certainly work well ...

    Re: MDF Okay For Curved Table Apron?
    A message posted at WOODWEB's Furniture Making Forum (10/17) -- I've done many curved aprons using mdf for the laminates with good success. I use 1/4 ...

    Re: Lean Grocery Stores
    A message posted at WOODWEB's Business and Management Forum (10/17) -- We always bad mouth and fight the Chinese because they supposedly sell their w ...

    Re: How Is This Door Made?
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- David, I've been following this thread since the beginning. I believe you ar ...

    Re: Wires through back of cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- If you search for “desk grommet” or “cable organizer” you’ll have more options than you ...

    Re: Fixing defects in low sheen 2k poly
    A message posted at WOODWEB's Finishing Forum (10/17) -- you might also try plastic razor blades (like a single sided but totally plastic). it is har ...

    Re: 1/8" lumber veneer S2S?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/17) -- Thanks for the reply. So you don't have any issues with the edge that t ...

    Re: Large window and door carry handles
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- Thanks guys. Randy nailed it. Ive used sheet metal garage door handles befor ...

    Re: scissor lift for old type tv cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Try Auton. They make a wide variety of lifts that might work. Their platform lifts use a ...

    Re: Fixing defects in low sheen 2k poly
    A message posted at WOODWEB's Finishing Forum (10/17) -- you could also try a single edge razor, make sure you hone it on a 2000 stone first, I send ...

    Re: Wires through back of cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Tell them an electrician would drill a 2" hole with a dull hole saw from the wrong ...

    Re: Large window and door carry handles
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- I buy garage door handles. They are metal and inexpensive. They are for my o ...

    Re: edge gluing direct from s4s/molder
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Joe I recall researching that machine or a very similar Martin 15+ years ago. It was a v ...

    Re: Door Rotisserie
    A message posted at WOODWEB's Finishing Forum (10/17) -- Marco, can you post a picture of the rack you store them on? I've been tooling around with a ...

    Re: CABINET INSTALLER PRICING
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/17) -- $65.00 per box is what we pay our subs for installation including tr ...

    Re: 1/8" lumber veneer S2S?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/17) -- 1/8" is fine on the jointer. I'd machine it just like 4/4. ...

    Re: MDF Okay For Curved Table Apron?
    A message posted at WOODWEB's Furniture Making Forum (10/17) -- For some reason, the photo will not post... ...

    Re: MDF Okay For Curved Table Apron?
    A message posted at WOODWEB's Furniture Making Forum (10/17) -- Here's the photo. ...

    Re: Veiling Lacquer
    A message posted at WOODWEB's Finishing Forum (10/17) -- Iwata SGD-71 ...

    Anyone using composite nails (like Raptor?)
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/17) -- Just asking around if anyone is using composite nails in any part of ...

    Fastening finished ends on frameless wall cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Our 3/4" melamine carcases are CNC cut with blind dado joinery, fastened together w ...

    Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- Hello all! The problem we're having is when cutting arched planton frames on our ...

    Window Sash Bit with Inverted Ogee
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- I have a few divided light doors to make and I would like to match the mullion profile o ...

    Re: SCMI S63 planer
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- I always call my electrician in for this kind of problem. Takes him less than 10 ...

    Re: The need for outsourcing in the new economy
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- My thinking was that if you consider that cutting up the sheet is about equal to loading ...

    Re: Fastening finished ends on frameless wall cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Gene, Those Titus fasteners are similar to Hefele's Rafix connectors. Expect your joints ...

    Re: Freelance SketchUp Guru needed!
    A message posted at WOODWEB's CAD Forum (10/17) -- Gerald, We're located 30 miles south of you in Inman Park in Atlanta. We've built a series of soft ...

    Re: The need for outsourcing in the new economy
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Pat To some extent you are helping prove my point. The huge investment of a router, beam ...

    Re: Wood Top
    A message posted at WOODWEB's Furniture Making Forum (10/17) -- I also like Jimbo's method and use that whenever I need to do a top that's thicker th ...

    Re: Installation Pricing
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Yes, just an estimate of hours based on site conditions and design of cabinetry. I am fr ...

    Re: CNC for carving projects
    A message posted at WOODWEB's CNC Forum (10/17) -- It has a flex shaft to drive the bit, not a router or spindle. It's much like a Foredom. The first ...

    Re: Sanders at the bench
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- For my money I use the Fein MSF 636. A 6 inch, with their turbo vac. Stout m ...

    Re: Fastening finished ends on frameless wall cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Thanks for the responses. Turns out Titan and maybe others makes a KD/RTA fastener that ...

    Re: CNC for carving projects
    A message posted at WOODWEB's CNC Forum (10/17) -- James Thank you for your response, so what was the problem, slow or over heating or constant broke ...

    Re: Anyone using composite nails (like Raptor?)
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/17) -- I have the gun and the nails. They are both junk IMO. You can't fast ...

    Re: Fastening finished ends on frameless wall cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Pocket screws or biscuits or a combination of both, depending upon the job. But, from wh ...

    Re: SCMI S63 planer
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Thanks for the responses. I've been to the partspronto site, but they don't have the rig ...

    Re: Dust problem
    A message posted at WOODWEB's Finishing Forum (10/17) -- Take the filters off of the out take. Use a compressor hose to blow the dust off of everythi ...

    Corner drawer boxes
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Looking for a supplier of drawer boxes for a base corner cabinet. Preferably in Wisconsi ...

    Re: Fastening finished ends on frameless wall cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- These will work also https://www.google.com/webhp?sourceid chrome-instant&ion 1& ...

    Re: CNC for carving projects
    A message posted at WOODWEB's CNC Forum (10/17) -- fun for hobby use only ... Mine is sitting in my barn for 8 years and in that time i have owned 6 ...

    Re: CNC for carving projects
    A message posted at WOODWEB's CNC Forum (10/17) -- I bought one in 07, it is out in my barn and saw about 6 weeks of use before i got my first full t ...

    Re: Fastening finished ends on frameless wall cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- What about pocket screws. You could do them from the bottom outside and top outside answ ...

    Re: Installation Pricing
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- If the contractor does the installation, you will then need to charge his sales tax. Her ...

    Re: The need for outsourcing in the new economy
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Good point Jeff, you are right with 2 of them one of them is Decore Door. ...

    Re: Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- I forgot to mention, the profile is a half round 3/8" thick 1" wide. ...

    Re: Fastening finished ends on frameless wall cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Yes, Titus. Sorry for the mistype. These. ...

    Re: Fastening finished ends on frameless wall cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Gene you mean Titus not Titan correct? ...

    Re: project management software
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- It is my understanding that the bigger dogs use Outlook ...

    Re: The need for outsourcing in the new economy
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- That would depend on your price. ...

    Re: project management software
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- Outlook for project management? ...

    Re: Dust problem
    A message posted at WOODWEB's Finishing Forum (10/17) -- The less air you move, the less dust you'll have. ...

    Re: Corner drawer boxes
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- WaltzCraft ...

    Re: Should I invest in a cabinet company?
    A message posted at WOODWEB's Business and Management Forum (10/17) -- I think the key is to LOOK at stuff. That graph says the US is in for boom tim ...

    Re: Marketing Not Working
    A message posted at WOODWEB's Business and Management Forum (10/17) -- I agree with what Robert said about the photos. Although it is hard to get dow ...

    Re: How much should a dust collection system cost?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/17) -- Get the factory requirements for the machines you will have, the ...

    Re: Need to find non-UF Glue for bent laminations
    A message posted at WOODWEB's Adhesives Forum (10/17) -- My understanding is that springback is determined by number and thickness of laminations and ...

    Re: Need to find non-UF Glue for bent laminations
    A message posted at WOODWEB's Adhesives Forum (10/17) -- talked to both Titebond tech,and Daryl @ vacupress re Unibond 1. Titebond extend has the har ...

    Re: Weinig Profimat 23
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- Scott FYI The Weinig R-925 is one of the most temperamental profile grinders ever ...

    CNC router life
    A message posted at WOODWEB's CNC Forum (10/17) -- I've been wondering what the life span of a CNC router typically is. Measured in spindle hours of ...

    Re: Weinig molders and carbide insert tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- Typical cutter head hook angles on a Weinig moulder are either 12 or 20 degree. T ...

    Re: CV on flex molding
    A message posted at WOODWEB's Finishing Forum (10/17) -- Thanks for the responses guys. I was hoping to be able to use the same product for everythin ...

    Re: Units of measurement for cut lists
    A message posted at WOODWEB's Business and Management Forum (10/17) -- We draw in CAD in millimeters. Site surveys are done in mm. All shop drawing s ...

    Re: Should I invest in a cabinet company?
    A message posted at WOODWEB's Business and Management Forum (10/17) -- Pat, I like where your head's at ! very interesting graph. I'm in my 30's and ...

    Re: Marketing Not Working
    A message posted at WOODWEB's Business and Management Forum (10/17) -- Maybe with a sheet metal plate around the both sides of the jig, Fire hose on ...

    Re: Marketing Not Working
    A message posted at WOODWEB's Business and Management Forum (10/17) -- If you want to get into photo edit a little deeper PS Elements is about $90 @ ...

    Re: Weinig molders and carbide insert tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- Whoops--That should read PS. Listen to the people in the below post from a few da ...

    Re: Import 3/4 pre finished birch on CNC?
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Aetna plywood, Frank Paxton lumber , Wurth Baer supply, All Tile , Sierra forest product ...

    Re: Import 3/4 pre finished birch on CNC?
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- Thanks for the advice. Any one know of a supplier of domestic Pre finished in the Midwes ...

    Re: Should I invest in a cabinet company?
    A message posted at WOODWEB's Business and Management Forum (10/17) -- Denisse, Can you afford to lose this investment in its entirety? If the answer ...

    Re: Restaurant Vanity
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/17) -- Kip porter makes the Star Hanger cantilevered support, check out pag ...

    Re: Ipe Deck Problems
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- To clarify,the end grain was sealed with a wax sealer furnished by the suppl ...

    blum hinge machine
    A message posted at WOODWEB's Cabinetmaking Forum (10/17) -- looking too buy a blum hinge machine where can I buy for a great price and what should I ...

    Re: Paper Wheel Sharpening
    A message posted at WOODWEB's Furniture Making Forum (10/17) -- David, I'm intrigued. How about a video? ...

    Re: Ipe Deck Problems
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- Yes, it was left unfinished. ...

    Re: bandsaw bed guides
    A message posted at WOODWEB's Sawing and Drying Forum (10/17) -- thanks guys for the help ...

    Double Drilling in HOPS (Holzher)
    A message posted at WOODWEB's CNC Forum (10/17) -- I have a customer who has a Holzher router and is experiencing something very weird: on some of hi ...

    Re: Microvellum - Labels
    A message posted at WOODWEB's CNC Forum (10/17) -- Ted, Are you sure you are running 67, not the newer version 7 program? I still run 67 for producti ...

    refacing options - natural oak to white painted
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/17) -- I have a refacing job coming up where the existing red oak cabinets ...

    Re: Any proficient Mozaik users here? I am considering it and have question
    A message posted at WOODWEB's CAD Forum (10/17) -- Hi Stephan, It sounds like you know exactly what you want, which is VERY good! I would suggest cal ...

    oak or ash veneer on 1" steel rod or tubing
    A message posted at WOODWEB's Adhesives Forum (10/17) -- I have a stair job in the works in which it could be useful to substitute a number of 1" ...

    uneven cut on bandsaw mill
    A message posted at WOODWEB's Sawing and Drying Forum (10/17) -- I have been operating a manual bandsaw mill, sawing a variety of woods in varied dia ...

    Re: Speed Up Glueing on Exterior Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- I agree with JT. You need to spend time scheduling other operations to keep ...

    Re: cutting irregular shaped logs
    A message posted at WOODWEB's Sawing and Drying Forum (10/17) -- I've rigged jigs but most of the time I saw one edge off to fit in the saw and saw b ...

    cutting irregular shaped logs
    A message posted at WOODWEB's Sawing and Drying Forum (10/17) -- I have a customer who has asked me to cut some irregular shaped logs retaining live ...

    import .tpa into genesis question
    A message posted at WOODWEB's CNC Forum (10/17) -- Hi Looking at using a third part software for creating engraving, this software outputs .tpa files ...

    Re: uneven cut on bandsaw mill
    A message posted at WOODWEB's Sawing and Drying Forum (10/17) -- Sounds like dull blade(s)...Also Cooks sawmill website has a great info section on s ...

    dominion midas moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- restoring 1987 5 head moulder. 1 spindle appears to need new bearings, so anyone ...

    Re: Engineered door stiles
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- There are dozens of options, you would have to be more specific. You can try ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (10/17) -- I've posted many times about Topsolid. We have Topsolid Design in which we do our layout/shop draw ...

    exterior glue
    A message posted at WOODWEB's Adhesives Forum (10/17) -- getting ready to build sapele entry and door for custom home. have always had good service w ...

    Re: Genesis list manager question?
    A message posted at WOODWEB's CNC Forum (10/17) -- thanks guys Great technical support at Busellato sorted the problem, needed to add Rem to a line i ...

    Re: Any proficient Mozaik users here? I am considering it and have question
    A message posted at WOODWEB's CAD Forum (10/17) -- Frank, that is exactly my concern. I don't want to lose a couple months on a program just to see i ...

    Re: Senco nailer
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/17) -- Have a Cadex 23 ga. and love it. I think it's the same gun as the Gr ...

    Re: exterior glue
    A message posted at WOODWEB's Adhesives Forum (10/17) -- Doug, You can get it here: http://www.cpadhesives.com/woodworking-adhesives/dyn-185-aerodux- ...

    Re: Better pull/knob drilling jig?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/17) -- Chris, what does the S&H drawer jig cost and who is selling it? ...

    Eyebrow head Pivot
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- Anyone have any suggestions for a double acting center pivot that would work ...

    Re: Genesis software for busellato
    A message posted at WOODWEB's CNC Forum (10/17) -- Mark Bradley is top bloke, real credit to the company Thanks ...

    Re: Better pull/knob drilling jig?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/17) -- Cheap ol' Eurojig. ...

    Re: Converting lineal ft cost to board foot cost
    A message posted at WOODWEB's WOODnetWORK Forum (10/17) -- As a side note, if you want to figure your cost per Lft to produce the part out of random ...

    Re: vacuum press
    A message posted at WOODWEB's Veneer Forum (10/17) -- Yup, you can use any size platen you want, or depending on circumstances, none at all! The mesh ...

    Re: How to make a 1/8" x 1/8" strip
    A message posted at WOODWEB's WOODnetWORK Forum (10/17) -- I ran into the same problem one time. If you can use short lengths you can buy them from a ...

    Re: Sheet goods pinching on sliding table saw
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/17) -- It is pinching on the blade and it's worst with the melamine she ...

    Re: Sheet goods pinching on sliding table saw
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/17) -- Is it pinching on the blade or the riving knife?Sometimes the ke ...

    Mathmatics
    A message posted at WOODWEB's Veneer Forum (10/17) -- I have made 22.25" diam. round cauls. I multiplied the diam. x 3.14 to get the circumferen ...

    CV door data base to laptop
    A message posted at WOODWEB's CAD Forum (10/17) -- Installed CV on my laptop. Everything is trasfered over except the "doors dbb" Laptop wi ...

    Re: Mathmatics
    A message posted at WOODWEB's Veneer Forum (10/17) -- You didn't account for your thickness of material (5/16"). Your should have used your diam ...

    Re: young guy needs urgent help with wood slab questions
    A message posted at WOODWEB's WOODnetWORK Forum (10/17) -- I can't follow what you meant by "assuming there are no variables such as radiant hea ...

    Laminate Inlay Techniques
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/17) -- I have attached a picture of some media stations and columns that I wil ...

    Re: CNC bits
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/25) -- I cut lots of 3/4” melamine and for years used uncoated bits. I tried the bits from Fr ...

    Re: Marketing Not Working
    A message posted at WOODWEB's Business and Management Forum (9/17/25) -- If your marketing isn’t working, the first step is to track where leads are ...

    Re: Post Oak Beetles
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/25) -- Not many customers will be good with “eventually”. Get your lawyer on board. ...

    Re: Blum Hinge machine
    A message posted at WOODWEB's Business and Management Forum (9/17/25) -- Are you still looking for it? ...

    Re: multi profile rail and stile insert tooling
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/24) -- Generally I only use them on the molder, I have used them on a shaper with T bushings. ...

    Getting Inserts out of helical cutterhead
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17/24) -- Much to our disappointment we discovered today that a team member who is no lon ...

    Re: Getting Inserts out of helical cutterhead
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17/24) -- I've had a similar situation, used molder head. Ended up drilling the screws an ...

    Pre-Finished Cabinet DOOR sUPPLIER
    A message posted at WOODWEB's Business and Management Forum (9/17/24) -- Our supplier of pre-finished cabinet doors has informed us that as of Jan. 1 ...

    Re: Getting Inserts out of helical cutterhead
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17/24) -- Get replacement screws Fight the old ones out. Put the knew ones in with a torq ...

    Re: What is the biggest reason it is hard to switch over for you to water b
    A message posted at WOODWEB's Finishing Forum (9/17/24) -- Mainly working primarily on cabinets but occasionally furniture pieces. ...

    Re: Veneer on particle board?
    A message posted at WOODWEB's Veneer Forum (9/17/24) -- they make veneered on particle board, same as MDF it's nothing unusual ...

    subcontracting millwork - high insurance rates - vs purchasing as product?
    A message posted at WOODWEB's Business and Management Forum (9/17/23) -- I currently subcontract out custom millwork to various subcontractors- we wo ...

    Re: Edgebander cleaning agents
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/23) -- It's not about savings, but emergency situations. Recently we had a canister spilled b ...

    Re: Flatline solvent flush, paint buildup
    A message posted at WOODWEB's Finishing Forum (9/17/23) -- Acetone isn't the best flushing solvent for a good deep cleaning since it does also leave ...

    Re: Spraying equipment
    A message posted at WOODWEB's Finishing Forum (9/17/23) -- Back in the day, (late 70's early 80's) we always used airless to spray a lacquer on produ ...

    Re: Edgebander cleaning agents
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/23) -- We buy Riepe LP 163/93 Cleaning Agent in 30 Liter containers at $500 Canadian dollars. ...

    Re: Edgebander cleaning agents
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/23) -- We buy Riepe LP 163/93 Cleaning Agent in 30 Liter containers for $500 Canadian dollars ...

    Hinges for an inset overlay panel
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/23) -- Is there a type of hinge that can be used for an inset panel that has an overlay? To p ...

    Re: Most reliable cordless 23 gauge pin nailers?
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/23) -- We install lots of laminated apartment entrance doors on new high rises and Milwaukee ...

    Re: Gloss versus Satin
    A message posted at WOODWEB's Finishing Forum (9/17/23) -- The main reason you would apply higher gloss under lower or satin would be for clarity. If ...

    Re: subcontracting millwork - high insurance rates - vs purchasing as produ
    A message posted at WOODWEB's Business and Management Forum (9/17/23) -- Your insurance company doesn't look at your tax form for the adjusted net in ...

    Re: Vanishing Act
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17/23) -- Sorry to hear that David. Rough situation. I had my own disaster with a pa ...

    Re: Most reliable cordless 23 gauge pin nailers?
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/23) -- If I have to shoot more than a few nails this is the way to go. Weighs nothing, small ...

    Ss
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/17/23) -- Did solidsurface.com close? Cant get thru to website. ...

    Carcase for frameless tall cab with double-oven opening
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/22) -- I have to do one of these for the first time, and see this at Baker Cabinets website. ...

    Re: Installing cv to a new pc
    A message posted at WOODWEB's CAD Forum (9/17/22) -- They'll likely want just a few thousand more of your dollars to make it work ...

    Re: Outdoor Table Joinery
    A message posted at WOODWEB's Furniture Making Forum (9/17/21) -- Keith Newton, Thanks for the reminder to always check the MC of the wood before wor ...

    Material selection and Corner Sink Base
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/21) -- Hello I am new to this forum and recently retired. I am not new to woodworking but lim ...

    new Edgebander choices
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/21) -- Hello friends, I am looking into buying an edgebander for my shop. I have been using m ...

    Re: Outdoor Table Joinery
    A message posted at WOODWEB's Furniture Making Forum (9/17/21) -- RichC, that's why I came here to ask for further wisdom and guidance before I follo ...

    Re: Cabinet Doors Website
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/21) -- Steve, Look around your area, I am sure there are smaller/local shops that specialize ...

    Re: Material selection and Corner Sink Base
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/21) -- Track down some pre-finished 1 side domestic core Maple or Birch from your nearest sou ...

    Re: Wood Countertop Finish Over CV-Based Stain\Glaze
    A message posted at WOODWEB's Finishing Forum (9/17/21) -- Thanks for the info so far, guys. I use SW products, and went ahead and looked up their 2k ...

    Re: Anyone running a flextrim sanding cup?
    A message posted at WOODWEB's CNC Forum (9/17/21) -- From what I have seen the cup brushes will not remove milling marks or cross grain sanding marks ...

    Re: Outdoor Table Joinery
    A message posted at WOODWEB's Furniture Making Forum (9/17/21) -- RichC, 49 years?! Nice! That is a lot of experience. Thanks for offering it through ...

    Re: Outdoor Table Joinery
    A message posted at WOODWEB's Furniture Making Forum (9/17/21) -- Bruce H, All materials will fail at some point. I'm hoping to build a table that wi ...

    Re: Outdoor Table Joinery
    A message posted at WOODWEB's Furniture Making Forum (9/17/21) -- Jason, Wood movement isn't a pain. I've been allowing for it for 49 years and other ...

    Re: Outdoor Table Joinery
    A message posted at WOODWEB's Furniture Making Forum (9/17/21) -- Jason, I don't know how it is in Florida, but where I am, all the Teak my suppliers ...

    Re: Anyone running a flextrim sanding cup?
    A message posted at WOODWEB's CNC Forum (9/17/21) -- We were (are) actually trying to automate some fine finish sanding on some 3form panels (face sa ...

    Re: Cabinet Doors Website
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/21) -- Hey Steve, I would check out Walzcraft. They manufacture a full line of doors, drawers ...

    Re: Outdoor Table Joinery
    A message posted at WOODWEB's Furniture Making Forum (9/17/21) -- That video is a homeowner project using materials and techniques destine to fail. I ...

    Re: Anyone running a flextrim sanding cup?
    A message posted at WOODWEB's CNC Forum (9/17/21) -- I have researched the cup brushes a lot. They won't really remove mill marks. Are you looking fo ...

    Re: Cabinet Doors Website
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/21) -- Adam B, Thank you for stating what I am sure all others think as well. We build most d ...

    Add new tool to Biesse NC1000
    A message posted at WOODWEB's CNC Forum (9/17/21) -- I'm getting comfortable with our Biesse Rover B NC1000 and up until now I had no reason to add a ...

    Re: Cabinet Doors Website
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/21) -- You'll have to have a business name and tax number for many of those businesses mentio ...

    Re: Renderings For Stair
    A message posted at WOODWEB's CAD Forum (9/17/21) -- staircon looks pretty good. Was at a demo for it a few years back. Compass is also very good ...

    Re: Cabinet Doors Website
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/21) -- YOU CAN TRY THIS 1 ALSO https://arkansaswooddoors.com/ ...

    Re: Cabinet Doors Website
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/21) -- Thank you for the great advice. I appreciate it. ...

    Re: Cabinet Doors Website
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/21) -- HERE IS ANOTHER 1 https://taylorcraftdoor.com/ ...

    Re: Cabinet Doors Website
    A message posted at WOODWEB's Cabinetmaking Forum (9/17/21) -- Thank you all for the responses appreciate it! ...

    Re: Long time contributor passed away
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- I'd like to share a little bit about my friendship with Tim. I actually never met Tim in ...

    Stave core door glue for 3/16" veneer?
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- Building a mahogany entry door 1 3/4" thick. I am making stave cores for ...

    Re: Looking for Better stain blocking primer
    A message posted at WOODWEB's Finishing Forum (9/17) -- I use a WB finish system for pigmented/ painted jobs and l do much the same as you except l m ...

    Re: Looking for Better stain blocking primer
    A message posted at WOODWEB's Finishing Forum (9/17) -- I use Bin Shellac. You can get by with one coat but two coats gives you a great primed surfac ...

    Re: Stiles on Inset Frame Cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- No problem at all. Blum has a full array of mounting plates of various thicknesses to mou ...

    Re: Looking for Better stain blocking primer
    A message posted at WOODWEB's Finishing Forum (9/17) -- There are only two staining issues we ever consider. Soft maple and poplar. Some of the dark ...

    Stiles on Inset Frame Cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Hi, I have a customer trying to maximize width on inset door cabinets. She would like 1.2 ...

    Re: Looking for Better stain blocking primer
    A message posted at WOODWEB's Finishing Forum (9/17) -- Why do you need a blocking stain? Are you spraying restoration cabinetry or something else no ...

    Re: Stave core door glue for 3/16" veneer?
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- I typically use Titebond 2 Extend but the plastic resin would be an excellent ...

    Re: Looking for Better stain blocking primer
    A message posted at WOODWEB's Finishing Forum (9/17) -- Probably 1 coat of M L Campbell's Clawlock II high solids primer will replace all those prime ...

    Re: Looking for Better stain blocking primer
    A message posted at WOODWEB's Finishing Forum (9/17) -- Dude if you can't stand the smell of denatured alcohol....lol Jump into our world of acid cat ...

    Re: Looking for Better stain blocking primer
    A message posted at WOODWEB's Finishing Forum (9/17) -- Clawlock isn't a blocking primer. Take a black magic marker and write on a pc of wood and pri ...

    Re: Looking for Better stain blocking primer
    A message posted at WOODWEB's Finishing Forum (9/17) -- PS; ML Campbell makes a WB stain blocking primer called "Arroyo" l haven't used it ...

    Re: Troubleshooting SCM Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Have scm edgebander that when using white melamine tape put small teeth like pressure mar ...

    Re: How to do this
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- Have the architect figure out how to achieve what he/she has drawn. Just beca ...

    Re: frame and panel doors-oversize or exact size?
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- I make my frame and panel doors 1/8" oversize all around and cut back. ...

    Re: Long time contributor passed away
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Here is a link to Tim's website. www.seattlecustomcabinets.com ...

    Re: Long time contributor passed away
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- I'm so sorry for your loss ...

    Re: Bamboo Plywood
    A message posted at WOODWEB's Adhesives Forum (9/17) -- What about Plyboo? ...

    Re: Management and inventory software
    A message posted at WOODWEB's Business and Management Forum (9/17) -- Ramsey, you said you are looking at project management, scheduling, inventory a ...

    Re: Buying custom cabinet shop: a good idea?
    A message posted at WOODWEB's Business and Management Forum (9/17) -- We make a good margin here and I kept the old owner on for a long time. Is the ...

    End grain bar top
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- This is bothering me quite a bit. In the August issuer of Kitchen and Bath Design magazin ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (9/17) -- SOLIDWORKS and Inventor, comparing these two platforms are like comparing apples vs apples. These t ...

    Re: Glazing Question
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- We allow 1/8” all around, when measuring I use a 8mm block in the the corner ...

    Re: need new cv
    A message posted at WOODWEB's Finishing Forum (9/17) -- I'm interested in trying the SW F3 conversion varnish, but I'm getting quoted a price of $150 ...

    Re: Louver Jig
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- Yes, I have long preached that a mistake early on is less problematic than a ...

    Re: vertical panel saws
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- I have an older Striebig 5192 It gets worked hard daily and is built like a tank. Very re ...

    Re: Biesse CNC profile program
    A message posted at WOODWEB's CNC Forum (9/17) -- Thanks so much Jason & Dan. Great information that really helped. Dan you mention "If you ...

    Re: Replacing bags with canisters
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (9/17) -- Pleated canisters filters are much more efficient and less messy ...

    Re: Installing wrought iron spindles
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- I've only done them a few times, but the caps have never sat nice and flush o ...

    Re: need new cv
    A message posted at WOODWEB's Finishing Forum (9/17) -- They are obviously quoting you the wrong price. If you haven't already, talk to your SW paint ...

    Re: End grain bar top
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- There are countless woodworkers that think the laws of wood movement somehow don't apply ...

    Re: vertical panel saws
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- I was in the same position a few years ago. I picked up a Striebig compact that was a few ...

    Re: Management and inventory software
    A message posted at WOODWEB's Business and Management Forum (9/17) -- Take a hard look at Tradesoft. They have all your looking for, and they tie int ...

    Re: End grain bar top
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Is it a true end grain or just a very thin slice. That would make it feasible. ...

    Re: Tree Removal
    A message posted at WOODWEB's Forestry Forum (9/17) -- Box elder puts out 17.9 million BTU/cord, silver maple puts out 19.3 ...

    Re: 100% Cotton Wiping Rags?
    A message posted at WOODWEB's Finishing Forum (9/17) -- check out ERC wiping products. lots of options. ...

    Re: Louver Jig
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- The antitrust yik yak is specious and benefits no one ...

    Re: Louver Jig
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- I do respect your woodworking skill ...

    Re: Best Waterbased Finish to Spray
    A message posted at WOODWEB's Adhesives Forum (9/17) -- Hi- I saw your message and thought I'd give my experience. I use almost entirely waterbased / ...

    Re: Commercial Case Goods
    A message posted at WOODWEB's Business and Management Forum (9/17) -- There is no possible way that I would consider getting into the cabinet busines ...

    Re: Commercial Case Goods
    A message posted at WOODWEB's Business and Management Forum (9/17) -- I can understand why some choose not to run a banding machine in a smaller shop ...

    Re: Spraying Waterbased Finish
    A message posted at WOODWEB's Finishing Forum (9/17) -- Adam, which WB you use? And 75 in the winter?!!! I would be sweating my b@lls off. In my area ...

    Re: edge tape adhesive - chemically sensitive client
    A message posted at WOODWEB's Adhesives Forum (9/17) -- I think you could easily do hot melt, which I think is PVA based. Not too many harsh chemical ...

    Re: HolzHer cnc battery replacement
    A message posted at WOODWEB's CNC Forum (9/17) -- The machine is a Conquest 510 manufactured in 2004. The control has "num" on the battery ...

    Re: OCS stains
    A message posted at WOODWEB's Finishing Forum (9/17) -- Get them from Richelieu. I have a gallon of nearly each of their colors and MOST of them are ...

    Re: 1/4" mdf panel glued to back of door frame
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- It works perfectly fine. I bet we have built 25,000 or more doors like this. With 2.25&qu ...

    Re: Mirka deros
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- I have a ceros and 2 deros. Like it’s already been said the ceros cord was heavy. My cero ...

    Re: OCS stains
    A message posted at WOODWEB's Finishing Forum (9/17) -- Colors are colors. Anyone can match colors. OCS is a thing. My customers asked for “it”. Spec ...

    Klever 1224 Biesse Service
    A message posted at WOODWEB's CNC Forum (9/17) -- Anyone out there have a Biesse Klever 1224 CNC? We're having issues with ours and it has very low h ...

    Re: 1/2" or 3/4" pipe clamps?
    A message posted at WOODWEB's Furniture Making Forum (9/17) -- I use 3/4" and I always use clamps on top and bottom of panel glue ups to equaliz ...

    Re: Problem with Oil heater boiler to veneer dryer
    A message posted at WOODWEB's Veneer Forum (9/17) -- Hello, Where are you located? Did you get a manual? Who installed the dryer and boiler? What is ...

    Re: Sprayable water based
    A message posted at WOODWEB's Adhesives Forum (9/17) -- I've used Wilson art H2O contact adhesive with excellent results. You can brush, spray, roll ...

    Re: accu-systems hvpp
    A message posted at WOODWEB's CNC Forum (9/17) -- does anyone have a wiring schematic that I could buy a copy of machine is accu-systems hvpp model y ...

    Re: Commercial Case Goods
    A message posted at WOODWEB's Business and Management Forum (9/17) -- If you can get the sales, go for it. Things like how you put a box together is ...

    Re: Klever 1224 Biesse Service
    A message posted at WOODWEB's CNC Forum (9/17) -- Biesse is absolutely top notch. They might be down cause of the hurricane. What issues are you havi ...

    Re: Commercial Case Goods
    A message posted at WOODWEB's Business and Management Forum (9/17) -- Mel! You are back! Nice to see nothing has changed except your name. ...

    Re: DACA & Shortage of Workers
    A message posted at WOODWEB's Business and Management Forum (9/17) -- Tony, It is true that we have far too many unemployed & under-employed peop ...

    Alphacam lag issues
    A message posted at WOODWEB's CAD Forum (9/17) -- Our company has recently purchased a seat of Alphacam ultimate router, and a hp Z book to run it on ...

    Re: Tool bags
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/17) -- I too am constantly trying to improve my setup. The past couple of ye ...

    Re: Mosaik for Closets - Anyone Using It?
    A message posted at WOODWEB's CAD Forum (9/17) -- I use Mozaik extensively for closets with VB connectors that require 2 holes. Drill bank helps in t ...

    spraying white
    A message posted at WOODWEB's Finishing Forum (9/17) -- what is anybody's go to product for white satin finish? I don't do a ton of finishing but up ...

    Re: Frameless ADA sink cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- I must be missing something - a quick Google produced voluminous responses of 32 or 32.5& ...

    Re: spraying white
    A message posted at WOODWEB's Finishing Forum (9/17) -- l use both the Kem-Var F3 pigmented CV and the Kem-Aqua pigmented WB lacquer. l too only have ...

    Re: spraying white
    A message posted at WOODWEB's Finishing Forum (9/17) -- Best I have ever used is chrmcraft pladsticolor. Has a great feel, consistent sheen, very eas ...

    Re: Dust capture for a line boring machine
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (9/17) -- I have a Detel double line boring machine which is the same as th ...

    Re: 9" stain grade baseboard installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/17) -- I agree with Paul bid this job and don't do t&m. Figure every pie ...

    Re: How to price out a pantry unit with rollout shelves
    A message posted at WOODWEB's Business and Management Forum (9/17) -- Tony if I was to estimate how many side walls are crooked to the point it requi ...

    Re: Looking for a way to get some plans
    A message posted at WOODWEB's WOODnetWORK Forum (9/17) -- You need to design your products your self. To buy plans puts you in direct competition wit ...

    Re: Basement gym on wood floating floor
    A message posted at WOODWEB's WOODnetWORK Forum (9/17) -- The problem with floating floors is heavy items will not float the floor will separate and ...

    Re: DACA & Shortage of Workers
    A message posted at WOODWEB's Business and Management Forum (9/17) -- We over 90 million American workers not in the labor force and we have a shorta ...

    Re: DACA & Shortage of Workers
    A message posted at WOODWEB's Business and Management Forum (9/17) -- Retired people? 10 million on permanent disability? An increase in the populati ...

    Re: CNC Variable Speed Drive problem
    A message posted at WOODWEB's CNC Forum (9/17) -- No one can help you even if we want No any details,like brand,how pc conect to inverter,what show o ...

    Re: Drawer Slides Suppliers Info Request
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/17) -- B, If I may ask who's your supplier. Im located in Boston ...

    KV 8091 pocket door slides
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Does anyone know if you can use Blum hinges and mounting plates on these slides ? ...

    Re: Where to find square washer with threads
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Wouldnt that actually be a square nut? har har ...

    Re: DACA & Shortage of Workers
    A message posted at WOODWEB's Business and Management Forum (9/17) -- Wut? ...

    Re: Looking for Maine cabinet shop that uses oil base paint
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Matt, Yellowing is a legitimate issue. It is very acute for non-ventilated areas that are ...

    Re: How do you compete with smaller shops?
    A message posted at WOODWEB's Business and Management Forum (9/17) -- I am the two man shop that is going after your market. Why? Because I can. I do ...

    Re: Looking for advice from the pros
    A message posted at WOODWEB's Finishing Forum (9/17) -- Most end users don't notice wheter or not the wood grain pops or gets subdued. They do notice ...

    Re: Panel cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- Alex I have one very close to what you're looking for but could easily make a 5/16 ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (9/17) -- Regards to Jason, I have known him for years. I never went wrong with any of his tech help. T ...

    Re: Estimating software
    A message posted at WOODWEB's Business and Management Forum (9/17) -- I'm president of TradeSoft. I checked your record and you are current with supp ...

    Re: Looking for Maine cabinet shop that uses oil base paint
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- All of our work is brush finished. Most of it with Benjamin Moore Oil Base Satin Impervo. ...

    Re: Bubbling Veneer
    A message posted at WOODWEB's Veneer Forum (9/17) -- I looked at the picture again. Is that piece being stored in a shed? That dented metal siding do ...

    Re: System Software
    A message posted at WOODWEB's Business and Management Forum (9/17) -- I'm president of TradeSoft. I don't have any record of you talking with us at I ...

    Re: Concealed hinge boo boo
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- I've fixed a few of those over the years using a 1-3/8" plug cutter. Match the grain ...

    Re: drawer slides
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/17) -- I am pretty sure a 3/8 side mount guide is available, but right now I ...

    Re: Flipping Sheet Material
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Thanks everyone for the responses! That's a great idea asking the supplier to orient for ...

    Re: Looking for Maine cabinet shop that uses oil base paint
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Cabmaker, I was just asked to paint a kitchen in Ben Moore advance. Do you have any exper ...

    Re: Looking for Maine cabinet shop that uses oil base paint
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- I use two coats of cover stain, I use naphtha to thin and speed the drying time of BM sat ...

    Re: Looking for Maine cabinet shop that uses oil base paint
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- I was thinking of priming with 2 coats zinsser cover stain (oil base primer) followed by ...

    Re: Bubbling Veneer
    A message posted at WOODWEB's Veneer Forum (9/17) -- The photo was taken while they were transferring trucks. It did not sit in storage in these cond ...

    Re: Bubbling Veneer
    A message posted at WOODWEB's Veneer Forum (9/17) -- I agree with the delimitation from the backer, but it may have been started with your finish. Di ...

    Re: Bubbling Veneer
    A message posted at WOODWEB's Veneer Forum (9/17) -- It was a waterbased finish we applied? I have never heard of a waterbased finish causing a react ...

    Re: Looking for Maine cabinet shop that uses oil base paint
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- I do a kitchen or two a year in oil. I work in alot of turn of the century cottages and t ...

    Re: Panel cutter
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- There is always the table saw and a routertable with a vbit and a guide metho ...

    Re: Flipping Sheet Material
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- I flip sheets by myself all the time... Is this really an issue? Maybe you should just hi ...

    Re: Concealed hinge boo boo
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- I believe I saw Rockler hardware had pre cut plugs in various wood species for fixing mis ...

    Re: Concealed hinge boo boo
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Not sure where I got it but was fairly recently that I purchased a tapered plug cutter fo ...

    Re: Wood Top
    A message posted at WOODWEB's Furniture Making Forum (9/17) -- You're going to get cross grain construction on the ends if you do that. Something wil ...

    Edge Sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- looking to upgrade to a new edge sander this vega fits my needs and budget does anyone ha ...

    Re: Panel cutter
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- Alex: See if this helps. TonyF ...

    Re: Bubbling Veneer
    A message posted at WOODWEB's Veneer Forum (9/17) -- A day in 80% humidity might just be enough. ...

    Advice for custom shops new CNC purchase
    A message posted at WOODWEB's CNC Forum (9/17) -- Hello All, We run a small 3-4 man custom wood shop. We build mainly high end custom interior/exteri ...

    Jointer chatter --- bad bearings?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- I recently purchases a used SCMI F3A 12" jointer. This is a 3 knife, non-ters ...

    Re: Brushable Lacquer Recipe
    A message posted at WOODWEB's Finishing Forum (9/17) -- Hey thanks for the response, Robert. I was trying to avoid an explanation, but maybe it would ...

    Re: How Many Hinges Per Door?
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Bernie, Your door size and weight puts it between the range for 4 and 5 hinges. The size ...

    Re: Advice for custom shops new CNC purchase
    A message posted at WOODWEB's CNC Forum (9/17) -- Seems like you don't turn cnc jobs very fast, so you are able to get by with a light spindle, but f ...

    Re: Lumber ID
    A message posted at WOODWEB's Sawing and Drying Forum (9/17) -- Ooops!!! My bad, I misread the how long on ground time frame. White Oaks will last a ...

    Re: woodCAD CAM software
    A message posted at WOODWEB's CAD Forum (9/17) -- Wood CAD/CAM is a good choice if I am not mistaken they are using RouterCim for machining. Inventor ...

    Re: 0ak cabinet refinishing job
    A message posted at WOODWEB's Finishing Forum (9/17) -- I've had very good success with Target 8000 for spray application and for brushing Target 200 ...

    Re: 3/8 air hose line
    A message posted at WOODWEB's Finishing Forum (9/17) -- Thanks Jim that's what i was originally looking at. They and Lowe's sell 3/8 fittings and the ...

    Re: light weight MDF spoil board causing problem?
    A message posted at WOODWEB's CNC Forum (9/17) -- Covered in that it is too porous in standard thicknesses. At 1.5" thick it is hard to find and ...

    Re: How Many Hinges Per Door?
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Al, Although hardwood will vary in weight from species to species, I normally use 2.7lbs/ ...

    Re: How much deposit
    A message posted at WOODWEB's Business and Management Forum (9/17) -- It looks like it comes down to who you deal with and where you are located, and ...

    Re: How Many Hinges Per Door?
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- In my experience, you will be okay with 4. The chart i used was for up to 24" wide d ...

    Re: How Many Hinges Per Door?
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Dennis, awesome that you posted these charts. Makes sense the real issue is weight since ...

    Re: Advice for custom shops new CNC purchase
    A message posted at WOODWEB's CNC Forum (9/17) -- Bite the bullet and buy something like an Anderson CabMaxx you will not regret it in the least in y ...

    Re: Brushable Lacquer Recipe
    A message posted at WOODWEB's Finishing Forum (9/17) -- Just a point karl and not meant to be a criticism. Adding too much Retarder will actually pre ...

    Re: Lumber ID
    A message posted at WOODWEB's Sawing and Drying Forum (9/17) -- The medullary rays were visible in the 3rd picture in the first post. Enlarge the pic ...

    Re: 3/8 air hose line
    A message posted at WOODWEB's Finishing Forum (9/17) -- I often pose these pictures on the paint forums I'm on. The one shows the difference in the o ...

    Paul Bois, National Drying Specialist
    A message posted at WOODWEB's Sawing and Drying Forum (9/17) -- Paul Bois, 89, died peacefully in Madison, WI on September 9. Paul was director of th ...

    Re: How Many Hinges Per Door?
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Bernie, I used the wrong square foot weight in calculating your door weight. Particle boa ...

    Re: Small product, large quantities - finishing cherry
    A message posted at WOODWEB's Finishing Forum (9/17) -- I should have said sealer sand cut through. When you sealer sand a sharp edge, you cut throug ...

    Re: light weight MDF spoil board causing problem?
    A message posted at WOODWEB's CNC Forum (9/17) -- Have been using 3/4 Lt.Weight with a 40hp pump for years. Don't have anything moving unless the sur ...

    Re: Brushable Lacquer Recipe
    A message posted at WOODWEB's Finishing Forum (9/17) -- Well, I still am lost at what you are coating (cabinetry or trim), but you may want to includ ...

    Re: Exterior wood doors
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- Dan, We use a lot of different mortise boxes but my favorite is Accurate. htt ...

    Re: How much deposit
    A message posted at WOODWEB's Business and Management Forum (9/17) -- My favorite thing about commercial work is they won't give down payments, are u ...

    Re: Brushable Lacquer Recipe
    A message posted at WOODWEB's Finishing Forum (9/17) -- My distributor for lacquer can provide a service to 'aerosolize' a gallon of any color lacque ...

    Re: Flat Table Passage doors
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- This is how a few router companies were doing M&T for windows at Ligna th ...

    Re: woodCAD CAM software
    A message posted at WOODWEB's CAD Forum (9/17) -- Russell; Have you considered Microvellum? You have to option of working in metric or imperial stand ...

    Re: 3/8 air hose line
    A message posted at WOODWEB's Finishing Forum (9/17) -- I like the pressure gauge idea i also do not like the gauge attached to the gun, just gets in ...

    Re: Microvellum DOC Sequence
    A message posted at WOODWEB's CNC Forum (9/17) -- Yeah, your going to need to call Oregon, V6 had issues with machining, well actually so does V7, bu ...

    Re: Brushable Lacquer Recipe
    A message posted at WOODWEB's Finishing Forum (9/17) -- Sorry for being unclear. Its trim, and the painters are friends of mine. Thanks for the sugge ...

    Re: Exterior wood doors
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- David, What is your choice of adhesive between the t&g boards and the fra ...

    Re: Exterior wood doors
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- Here are some photos of a plank door that show the plank spacing held with sp ...

    Re: Exterior wood doors
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- TB III is the preferred glue for workability and durability. No need to go to ...

    Re: How Many Hinges Per Door?
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Dennis, How many for a maple raise panel door that is 19-1/4"W x 36" L? I was h ...

    Wadkin planer
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- I just got a wadkin 24" planer, Model BAJ 70225. Does anyone know how old thi ...

    Re: Lumber ID
    A message posted at WOODWEB's Sawing and Drying Forum (9/17) -- This last picture indeed makes me change my mind to one of the red oaks. Keith is cor ...

    Re: Attaching large square table top
    A message posted at WOODWEB's Furniture Making Forum (9/17) -- I like these the best. You can install them anywhere once assembled and they let it mo ...

    Re: stripping old paint & saving finish
    A message posted at WOODWEB's Finishing Forum (9/17) -- jafo - why do you believe the table has a faux finish under all the paint? It should be solid ...

    Re: 3/8 air hose line
    A message posted at WOODWEB's Finishing Forum (9/17) -- Home Depot sells 3/8" fittings that fit the 1/4" std hose ends. They're sold in a k ...

    Re: light weight MDF spoil board causing problem?
    A message posted at WOODWEB's CNC Forum (9/17) -- Covered how? Just people saying it's no good and a bad idea. Specifics? ...

    Re: Lumber ID
    A message posted at WOODWEB's Sawing and Drying Forum (9/17) -- No Chestnut does not have visible ray cells, nor does Sassafras, so it looks like an ...

    Re: Brushable Lacquer Recipe
    A message posted at WOODWEB's Finishing Forum (9/17) -- and why wouldnt you just use latex paint tinted to match? ...

    Re: How much deposit
    A message posted at WOODWEB's Business and Management Forum (9/17) -- In commercial the deposit is zero. ...

    Re: How Many Hinges Per Door?
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Thanks always Dennis. ...

    Re: Brushable Lacquer Recipe
    A message posted at WOODWEB's Finishing Forum (9/17) -- What are you doing? Try DEFT ...

    Re: How Many Hinges Per Door?
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Thanks very much. ...

    Re: How much deposit
    A message posted at WOODWEB's Business and Management Forum (9/17) -- Commercial is zero. ...

    Re: Holding pre-hung man doors closed
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- For many years, the standard for us was the same as elsewhere - the Ives type ...

    Re: Holding pre-hung man doors closed
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- The magnets are the Neodymium Rare Earth type. The ones I used are about 1/8& ...

    CNC equipment advise
    A message posted at WOODWEB's CNC Forum (9/17) -- I own a small custom furniture shop. We're doing well and have hit the point where introducing CNC ...

    Re: Holding pre-hung man doors closed
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- David, What is nice about the system I came up with is you get the feel of th ...

    Re: Holding pre-hung man doors closed
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- This is an interesting discussion. There are some things here I never conside ...

    Re: keep live edge on slabwood
    A message posted at WOODWEB's Furniture Making Forum (9/17) -- If the bark made it through the kiln, it should be fine for a long time. Dye around th ...

    Re: Wood Glide lubricant
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- Just a minor follow up to my earlier question, Par/Woodglide has moved recently an ...

    Shelix -- Made In Usa
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- I have done some internet research on upgrading my planer to the shelix style head ...

    Re: Wood Glide lubricant
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- Hi Bill: The MBL-40 can be applied using a hand sprayer and putting a light applic ...

    keep live edge on slabwood
    A message posted at WOODWEB's Furniture Making Forum (9/17) -- I have a large slab of Ash. I would like to keep the live edge on it. Bark is on there ...

    Re: 2 pc MDF doors in Cabinet Vision
    A message posted at WOODWEB's CAD Forum (9/17) -- Bob, I use a UCS to create 2 routes on the door. 1 for the rebate & 1 for the cutout. Also Attr ...

    Are you attending the Wood Pro Expo next month?
    A message posted at WOODWEB's CNC Forum (9/17) -- If so, for a FREE registration, use Promo Code 223! Located at the Maryland State Fairgrounds just ...

    Re: 2 pc MDF doors in Cabinet Vision
    A message posted at WOODWEB's CAD Forum (9/17) -- Bob, You could use door maker in your Door Catalog Editor to make the door you want. You would have ...

    Re: 2 pc MDF doors in Cabinet Vision
    A message posted at WOODWEB's CAD Forum (9/17) -- I allready make mdf door and but is 1 pc door . But I was thinking to make frame ( glass ) door wit ...

    Re: Holding pre-hung man doors closed
    A message posted at WOODWEB's Architectural Woodworking Forum (9/17) -- Thanks for the description BH. I just ordered a set of magnets. If somebody c ...

    Re: SHELIX -- MADE IN USA
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- You need to contact Byrd Tool. They manufacture the Shelix cutter head here in the ...

    Re: 2 pc MDF doors in Cabinet Vision
    A message posted at WOODWEB's CAD Forum (9/17) -- I using version 8 ultimate I want to be able to create separate frame and panel and put together af ...

    Re: CNC equipment advise
    A message posted at WOODWEB's CNC Forum (9/17) -- NewCNC has some nice machines. I personally bought a used Techno isel machine and attached a Sherli ...

    Re: Senco nailer
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/17) -- I would recomend Grex over the Senco. I have had major repeat problem ...

    Re: Wood Glide lubricant
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- I have a question. How is it applied to a machine other that a molder? ...

    Re: ONSRUDE MARATHON
    A message posted at WOODWEB's CNC Forum (9/17) -- rpm 18000 feedrate 1080inches/min. chioload 0.020 ...

    Re: cutting tapered lamp base 90 degrees
    A message posted at WOODWEB's Furniture Making Forum (9/17) -- Thanks to all of you for your help! A miter saw would work beautifully but I'm not abl ...

    Re: running material over 97" long
    A message posted at WOODWEB's CAD Forum (9/17) -- Fastest and easiest is to go into the material catalogue bc copy th most common sheet/panel you use ...

    running material over 97" long
    A message posted at WOODWEB's CAD Forum (9/17) -- I always run 4 x 8 sheets on my Biesse Rover, but i need to run longer material, what do i need to ...

    Re: running material over 97" long
    A message posted at WOODWEB's CAD Forum (9/17) -- Check you limitations in the machine catalog also The max X needs to be longer than the sheet you i ...

    table saw dovetails
    A message posted at WOODWEB's Furniture Making Forum (9/17) -- can anyone direct me to instructions for cutting dovetails on a right tilt table saw. ...

    Re: Wall mounted closet
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/17) -- Jordan, we hang a good many wall mounted closets using horizontal cle ...

    Re: Wall mounted closet
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/17) -- you might want to try Fine Woodworking. com, their ask and answer web ...

    Re: Wall mounted closet
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/17) -- Thanks for the responses I think I have a good idea how I'm going to ...

    Re: LED strip lights used under counter
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/17) -- I agree, that's the reasons why I only go for LED lights now. ...

    Re: Precat Surfacer Failing
    A message posted at WOODWEB's Finishing Forum (8/17/24) -- All are excellent responses to the reality of reps advising finishers or those in the trad ...

    Re: Signal for Compressor
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/17/24) -- Almost all my wall plugs and machines are on a 2nd breaker pan ...

    Re: Exterior hand rail finishing
    A message posted at WOODWEB's Finishing Forum (8/17/24) -- Chemmy, Thanks for the suggestion. I went with the Polymerized Tongue oil and am quite ple ...

    Re: Signal for Compressor
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/17/24) -- I tried to edit the post to include the fact that the relay al ...

    How you price timber
    A message posted at WOODWEB's Sawing and Drying Forum (8/17/24) -- hi to you all, i am thinking about buying my own mill, to buy in timber To process ...

    Re: Signal for Compressor
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/17/24) -- PM, I think Newark Electronics sells the timer relay. Eagle si ...

    Re: Signal for Compressor
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/17/24) -- Thanks for the idea Jim, I needed something like that for the ...

    Re: Mdf shaker doors
    A message posted at WOODWEB's Finishing Forum (8/17/24) -- Craig, what type of sander are using and what is you grit process? ...

    Re: Material or treatment advice for outdoor furniture??
    A message posted at WOODWEB's Furniture Making Forum (8/17/23) -- I understand that the thread is a few years old, but the information shared here re ...

    Re: Material or treatment advice for outdoor furniture??
    A message posted at WOODWEB's Furniture Making Forum (8/17/23) -- I understand that the thread is a few years old, but the information shared here re ...

    Re: Lineal ft price
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17/23) -- Nope. He'd charge $7 to run it through the moulder. I think his setup is $ ...

    Re: Teeth set always one direction
    A message posted at WOODWEB's Sawing and Drying Forum (8/17/23) -- Thanks for the responses all. I have rebuilt the guide system and now operate the ...

    Re: Wood filler for Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (8/17/23) -- Haven't used it under CV but I've been using Timber Mate for years. They all shrink, even ...

    Corian Ash Concrete Adhisive needed
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/17/23) -- Hi everyone, I am in desperate need of adhesive to match Ash Concrete ...

    Corian
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/17/23) -- I have a tremendous amount of corian and other solid surface material ...

    Re: Wood filler for Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (8/17/23) -- Elmer's E849D8 Carpenter's Interior Wood Filler, not the stuff with wood fibers which is t ...

    Re: Lineal ft price
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17/23) -- Wow Karl, that guy is cheap. If a restoration guy wanted 20' of custom cro ...

    Bubbles
    A message posted at WOODWEB's Adhesives Forum (8/17/23) -- Hi, How to make Polyviny Acetate based woodwork adhesive bubble free during manufacturing ...

    Re: Project managament software
    A message posted at WOODWEB's Business and Management Forum (8/17/22) -- Thank you all for your answers. John, It's not just for Project Estimation. ...

    Re: 5 and 6" air sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/22) -- Mirka Ceros here as well and two Air Vantage electrics. To the post that says they ove ...

    Widebelt Tracking Issue
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/22) -- I recently bought a used Grizzly H2934 that had been converted from pneumatic tracking ...

    Re: Project managament software
    A message posted at WOODWEB's Business and Management Forum (8/17/22) -- We use Microsoft OneNote and ClickUp OneNote is free with Windows 10 and 11 ...

    Re: laminated solid oak slat panels
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/17/22) -- If your confident in your finish I'd just plow out tight fitting dado ...

    Re: Project managament software
    A message posted at WOODWEB's Business and Management Forum (8/17/22) -- You could do all of this with Mozaik and google sheets , you may not get the ...

    Re: 5 and 6" air sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/22) -- We have an airvantage 5 inch electric sander it has a laggy start up, Also when sandin ...

    5 and 6" air sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/22) -- What are you guys using for air sanders? I love my older Dynabrade Silver supreme but ...

    Re: 5 and 6" air sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/22) -- I only have the air powered air vantage sanders, I have the dust collection hoses on t ...

    Re: First run at entry/exterior 5 panel, raised panel doors
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17/22) -- I forgot to mention adhesives oops. Everything we do is glued with epoxy. ...

    Re: 5 and 6" air sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/22) -- The Mirka Deros are amazing...just received the 6"..already had the 5" Mirka ...

    Re: 5 and 6" air sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/22) -- All the air sanders I have are Airvantage, I really like them. I have however been swa ...

    Re: First run at entry/exterior 5 panel, raised panel doors
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17/22) -- Karel, We only use 3 glues in our shop. TiteBond 1, super glue, and epoxy. ...

    Re: 5 and 6" air sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/22) -- I thought the same thing about the Deros too but i actually prefer it more after i use ...

    Re: Widebelt Tracking Issue
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/22) -- Kord, I am unfamiliar with your machine and the way it is setup. I was just going to m ...

    Re: Widebelt Tracking Issue
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/22) -- Some belts are too thin to block the eye. Take a can of aerosol black paint and paint ...

    Re: Widebelt Tracking Issue
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/22) -- The eyes are clean and when I put my hand in front of them they rotate the arm so they ...

    Re: 5 and 6" air sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/22) -- Mirka Ceros here. Wouldn't go any other way. Deros is bigger and more clumsy, but stil ...

    Re: Pro 100
    A message posted at WOODWEB's CAD Forum (8/17/22) -- I took a quick look. The first thing that came to my mind was the white backgrounds causing burn ...

    Re: Face Frame construction methods.
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/21) -- I think the biggest resistance to euro cabinet construction is the cabinetmaker. If th ...

    Re: Frameless sinkbase: edgetape or not
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/21) -- OK and thanks for the responses. I think I've developed a nice solution. See the image ...

    Re: Frameless sinkbase: edgetape or not
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/21) -- I've decided that Bruce H is my mentor and guru for this, after seeing his picture and ...

    Re: Where to find employees today/
    A message posted at WOODWEB's CNC Forum (8/17/21) -- Looks like I found a good man. Local college student. His CNC instructor introduced us. I have n ...

    Re: Frameless sinkbase: edgetape or not
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/21) -- "Full height doors don't seem right, they expose all that sink and plumbing when ...

    Akron 246 Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/21) -- Hoping someone can help. There are a number of parameters, T1 through T8. Anyone know ...

    Re: Oversized Exterior 1 Lite Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17/21) -- Wind loading? Huh. I hadn't thought of that. That's a point worth investig ...

    Re: spray booth questions
    A message posted at WOODWEB's Finishing Forum (8/17/21) -- Rich, I've got an open face booth with fire suppression in a 1600 sqft shop dedicated to f ...

    Re: Best way to mark off the spindles for drilling
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17/21) -- Place your previously cut to length rails on the curb below. use a combina ...

    Re: Frameless sinkbase: edgetape or not
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/21) -- Gene, is the 0.5mm offset necessary? Real drawer fronts (as well as doors) are ~3mm aw ...

    Re: spray booth questions
    A message posted at WOODWEB's Finishing Forum (8/17/21) -- Thanks. It seems quite the task to actually do this and do it right. There is talk of sett ...

    Re: spray booth questions
    A message posted at WOODWEB's Finishing Forum (8/17/21) -- I had the local fire inspector pick out a booth, exhaust system, and dry chem fire suppres ...

    Re: Oversized Exterior 1 Lite Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17/21) -- What is the weight and type of glass? 16' bothers me for wind load. The ci ...

    Re: Frameless sinkbase: edgetape or not
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- When i said conventional sttetches banded meant with the panel as well as its drawn out o ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17/21) -- In the 1980's a shop I ran charged an even $100, with a $50 an hour labor rate. ...

    Re: Power feed Mounting
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17/21) -- I'd fasten the sub plate to the shaper table top and the cantilever part t ...

    Salice blind corner overlay drawing
    A message posted at WOODWEB's CAD Forum (8/17/21) -- Does anyone happen to have a drawing of a Salice "Blind Corner Overlay" hinge? Either ...

    Re: Help to achieve Grey / Beige Finish
    A message posted at WOODWEB's Finishing Forum (8/17) -- I have a similar problem but my wood is way too lighter than yours. I will try some of the su ...

    Re: spray booth questions
    A message posted at WOODWEB's Finishing Forum (8/17/21) -- An open faced booth would be fine, you just have to make sure you are replacing the air su ...

    Laminate for paint
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/21) -- What is a good laminate to apply to unfinished maple ply when painting. I know there a ...

    Re: spray booth questions
    A message posted at WOODWEB's Finishing Forum (8/17/21) -- Open face won't work with explosion proof, and it may not be sufficient for your insurance ...

    Re: Laminate for paint
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/21) -- There isn't a better base for paint than maple. What will the laminate improve? ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17/21) -- Thanks for the reply David, much appreciated. Anyone else have any input? ...

    Re: drill bit
    A message posted at WOODWEB's CNC Forum (8/17/21) -- Thanks Rich - I added Amana to my search query and it popped up right away. ...

    Re: Prime, or not to prime?
    A message posted at WOODWEB's Finishing Forum (8/17) -- If you want a flawless paint job then priming is what you need to do. Your end result with fi ...

    Re: Dynapro / Blum - Maximum drawer width
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- Hey Dennis, The shelf slide sounds like something I'd like to use for a kitchen pullout c ...

    Re: Prime, or not to prime?
    A message posted at WOODWEB's Finishing Forum (8/17) -- If you have a good Conversion varnish, and skilled sprayers, you can definitely spray self-se ...

    attaching panels to bottom of wall cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- We are doing a large face frame job where the homeowner wants the bottom of her wall cabi ...

    Automatic oilers for Dynabrade/Air sanders
    A message posted at WOODWEB's Finishing Forum (8/17) -- We used to manually oil our air sanders with a drop or two of oil each day but we recently ju ...

    Re: Dynapro / Blum - Maximum drawer width
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- Hey Leo, The weight would not be a problem but pounding on it to make bread would likely ...

    Re: attaching panels to bottom of wall cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- I've had success prefinishing 1/4" sheets for the bottom, putting a dab of PL/adhesi ...

    Epic Corian Failure
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/17) -- Hello everyone, this is an outdoor, direct sunlight Corian application. ...

    Re: dovetail machine
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- Curious about the Dodds as well. Ive seen some of their multipin machines at auctions. Is ...

    Re: Dynapro / Blum - Maximum drawer width
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- I've looked at the options at Richelieu and didn't really see anything. Most were for a c ...

    Re: Automatic oilers for Dynabrade/Air sanders
    A message posted at WOODWEB's Finishing Forum (8/17) -- just a suggestion, you would need an oiler with about a 60cfm flow but how would you know tha ...

    Re: Prime, or not to prime?
    A message posted at WOODWEB's Finishing Forum (8/17) -- The major problem with cv is film thickness. Exceed it and you may get cracking. Painting tak ...

    Panel mounting hardware
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- I'm in the early stages of designing a columbarium for a church. The piece is ...

    Shelix cutterheads
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/17) -- Hi all I have all Shelix cutterheads in my shop and time has come ...

    Re: Is it possible to just replace the adjustable wood insert in threshold?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- There are t nuts under in the lower part of the threshold and the screws are ...

    Re: Automatic oilers for Dynabrade/Air sanders
    A message posted at WOODWEB's Finishing Forum (8/17) -- I have a pneumatic paint shaker that I use an oiler on. You can vary the oiler to almost noth ...

    Re: dovetail machine
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- Hi Jim i am curious about your dodds machine? what year is it. I know of a SE25 cnc machi ...

    Re: Prime, or not to prime?
    A message posted at WOODWEB's Finishing Forum (8/17) -- I do 2 coats of primer and one top coat .I find the primer drys much faster and sands easier ...

    Re: Dynapro / Blum - Maximum drawer width
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- Is this a trick question? :) I can send you 2 pair and build a mock-up. I think if you po ...

    Re: Panel mounting hardware
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- They may be called "Finish Washers" I have used them try a search. ...

    Re: Panel mounting hardware
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- You could use magnet fastened to the back side of panels. Perley ...

    Re: Alphacam to Woodwop (Homag machines)
    A message posted at WOODWEB's CAD Forum (8/17) -- If it is still actual. Let me know. ...

    Re: Louver Jig
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- I would have to agree, the satisfaction of coming up with a jig that works is ...

    Re: Fine Lettering Advice
    A message posted at WOODWEB's CNC Forum (8/17) -- I would be trying various 2 pass methods either a single pass with varying the depth on the final p ...

    Re: Fine Lettering Advice
    A message posted at WOODWEB's CNC Forum (8/17) -- All above is correct. However you might try one more time using a mask over the plywood surface whe ...

    Re: Business
    A message posted at WOODWEB's Business and Management Forum (8/17) -- It should be mentioned that future is not necessarily dour for cabinet guys. Th ...

    Re: Louver Jig
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- After a set-up and about 4-5 hours hooked up to a router, I admit to thinking ...

    Re: Restaurant Tabletop Finish Touch-up
    A message posted at WOODWEB's Finishing Forum (8/17) -- No way you will have a number of problems that you cannot fix I have redone over 20,000 table ...

    Re: Dust Pipe Needed
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/17) -- I have two 13 inch quick fit used elbows that we no longer need a ...

    Re: Biesse nesting problems
    A message posted at WOODWEB's CNC Forum (8/17) -- Sorry for the delay in responding, I've had a few break throughs with the machine, I changed some s ...

    Re: Fine Lettering Advice
    A message posted at WOODWEB's CNC Forum (8/17) -- Thank you for the responses. I concur that a laser would be the most appropriate tool for the job, ...

    Re: Louver Jig
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- David, Outstanding fixture. I've done louvers on both my Wirth Machine (heavy ...

    Re: Fine Lettering Advice
    A message posted at WOODWEB's CNC Forum (8/17) -- I use the Oracal 631. I've tried the Oramask 813 and didn't like it. While made for masking tasks i ...

    Re: Biesse nesting problems
    A message posted at WOODWEB's CNC Forum (8/17) -- I'd be inclined to call support. I was going to suggest you check the symmetry pairings at the mach ...

    Re: RE: Grit of wood using a Planer
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- As to who makes the best knives, that depends on what kind of head it has. Tersa? ...

    Sticky wood finish
    A message posted at WOODWEB's Finishing Forum (8/17) -- The tables in the break room where I work have a 1 1/2" wood border. I don't know old th ...

    Re: Euro/PB Core in older masonry home
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- 35 years. Done a few of these. Band all edges and drill minimum holes. If the home contin ...

    Re: Fine Lettering Advice
    A message posted at WOODWEB's CNC Forum (8/17) -- I would prefer to use 60* bit. Mine is a three flute. Try 80 in/min plunge and cut speed. I run at ...

    Re: Burl Identification
    A message posted at WOODWEB's Finishing Forum (8/17) -- You can give the wood identifiers a better chance if you add photos of the end grain. Use a s ...

    Re: Sticky wood finish
    A message posted at WOODWEB's Finishing Forum (8/17) -- Could it be just dirt? I would try to clean it first Try some naphta,cleans grease,wax,and it ...

    Paul Downs' book
    A message posted at WOODWEB's Business and Management Forum (8/17) -- I finally got around to reading his book. I'm only half way through. Wow what a ...

    Re: Paul Downs' book
    A message posted at WOODWEB's Business and Management Forum (8/17) -- In chapter 7 he talks about be held captive by the foreman Steve. It was intere ...

    Re: Biesse nesting problems
    A message posted at WOODWEB's CNC Forum (8/17) -- How would someone tell if their copy is legit? The original pc died and was replaced then setup by ...

    Re: Paul Downs' book
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Totally enjoyed it. Have to go back and reread. Been awhile, so many applicatio ...

    Re: Business
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Some context on home sales, they are still very low ...

    Re: Sticky wood finish
    A message posted at WOODWEB's Finishing Forum (8/17) -- BTW whatever I do needs to be food safe. ...

    Re: Paul Downs' book
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Very forthright ...

    Re: KemVar Plus CV not hardening
    A message posted at WOODWEB's Finishing Forum (8/17) -- Product is H66 W 53 It is a custom color batch using the correct pigment codes. Can't find th ...

    Re: Expiration Date of Finishes
    A message posted at WOODWEB's Finishing Forum (8/17) -- Robert, Can you comment specifically on what finish you are comparing to Target as a "tr ...

    Re: Expiration Date of Finishes
    A message posted at WOODWEB's Finishing Forum (8/17) -- Paul.....For what it's worth, I've had some very old TARGET 6000, 8000 & some 9000 series ...

    Re: KemVar Plus CV not hardening
    A message posted at WOODWEB's Finishing Forum (8/17) -- Just re reading through your guys' responses... The mix was absolutely 128oz (1gal), catalyze ...

    Re: KemVar Plus CV not hardening
    A message posted at WOODWEB's Finishing Forum (8/17) -- I once poured off a gallon of black kem-var plus out of a 5 to have a custom tint match made ...

    Re: KemVar Plus CV not hardening
    A message posted at WOODWEB's Finishing Forum (8/17) -- I also use the SW kemvar plus.. your catalyst ratio for the color coat is correct. If its a c ...

    Re: KemVar Plus CV not hardening
    A message posted at WOODWEB's Finishing Forum (8/17) -- Hey Shane, Sure do, have 7 gallons left for this job. Both gallons of cat show V 66 V 21. Bot ...

    Re: Expiration Date of Finishes
    A message posted at WOODWEB's Finishing Forum (8/17) -- I have to 2nd what Mark B said. This is like the people who have you smell a steak that's bee ...

    Expiration Date of Finishes
    A message posted at WOODWEB's Finishing Forum (8/17) -- Greetings – Due to unforeseen circumstances – Life – finish I bought what seems to be recentl ...

    Re: Expiration Date of Finishes
    A message posted at WOODWEB's Finishing Forum (8/17) -- TGIF - I appreciate all the information and especially the reality check(s) on the risk to cr ...

    Biesse 336 Rover Machine Data Issue
    A message posted at WOODWEB's CNC Forum (8/17) -- I have a 1997 Biesse 336 Rover. The hard drive crashed and I installed another from a nearly identi ...

    Re: sliding shaper advice
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- I have the Extreme Xt-260, a sliding table tilting. I actually use the tilt f ...

    Re: Stair tread finish
    A message posted at WOODWEB's Finishing Forum (8/17) -- 320 is way too fine for the raw surface. Like Leo said, you can get there later in the finish ...

    Retrofit soft close for Blum slides
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- I recently had a client ask if the drawer slides in their bath vanity be converted into s ...

    Re: Rent or buy our first shop?
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Sounds like you have the financing if your asking the question . As a sole prop ...

    Re: KemVar Plus CV not hardening
    A message posted at WOODWEB's Finishing Forum (8/17) -- do this.... do you have any of the uncatalyzed finish left? catalyze that and do a test spray ...

    Re: What equipment do I need to make solid wood cabinet doors in-house?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- We make about 50 doors a week with the following, SLR saw crosscut saw with Tigers ...

    Re: KemVar Plus CV not hardening
    A message posted at WOODWEB's Finishing Forum (8/17) -- Just another thought about this, the 310 solvent is great at giving u that silky smooth feel, ...

    Re: How long to heat to sterilize wood
    A message posted at WOODWEB's Sawing and Drying Forum (8/17) -- The time depends on the moisture content of the wood. With dry 4/4 at 150 F air tempe ...

    Pre-primed moldings
    A message posted at WOODWEB's Finishing Forum (8/17) -- Anyone using CV over todays all to common finger jointed primed moldings. We have a new finis ...

    Re: sliding shaper advice
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- Thanks again for all the input, The other model I was considering, and will l ...

    Re: 12" table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- I haven't used many table saws, but I can attest that the dewalt saws have an amaz ...

    Re: better (older) rip saw - mattison or diehl?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Loved my Mattison 202, a very accurate glue joint but the chain wore out . replace ...

    Re: Stair tread finish
    A message posted at WOODWEB's Finishing Forum (8/17) -- On this particular job, I am aggressively wire wheeling the wood but then sanding by hand wit ...

    Re: KemVar Plus CV not hardening
    A message posted at WOODWEB's Finishing Forum (8/17) -- What product number for the coating and the catalyst and I will look into it for you...... I ...

    Re: 3mm pilot drill, most appropriate type steel
    A message posted at WOODWEB's CNC Forum (8/17) -- JERRY No through drill, one pass. I discovered the ballnose ont of necessity. Broke an 1/8 drill,on ...

    Re: Stair tread finish
    A message posted at WOODWEB's Finishing Forum (8/17) -- You have to look at the finish to see what they request for the final sand. 220 might work fo ...

    Re: What equipment do I need to make solid wood cabinet doors in-house?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- What's your budget? Are you looking at all new or used? Can you spend some time an ...

    Re: Help with Stealth "streaks"
    A message posted at WOODWEB's Finishing Forum (8/17) -- Yeah, stealth 275 is ridiculously thin (probably due to acetone level) It's 10-15 seconds For ...

    Re: sliding shaper advice
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- We have a T27 Martin. Never use the slider. Takes me 3 mins to make a fixture ...

    Widebelt thickness
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- are there any manufacturers who make a wide belt sander with a thickness capabilit ...

    Re: Outsource for cheap doors
    A message posted at WOODWEB's WOODnetWORK Forum (8/17) -- Did you try approaching Conestoga about the project and what you can do to reduce costs? ...

    Re: Expiration Date of Finishes
    A message posted at WOODWEB's Finishing Forum (8/17) -- I'd contact Jeff Weiss, the owner, and ask him. He's honest about what to expect. ...

    Re: Fisheye question
    A message posted at WOODWEB's Finishing Forum (8/17) -- looks a speck of oil, likely from a worn seal. It'll get worse. ...

    Re: Stair tread finish
    A message posted at WOODWEB's Finishing Forum (8/17) -- Glitsa and wear a mask, open the windows! ...

    Re: Stair tread finish
    A message posted at WOODWEB's Finishing Forum (8/17) -- why are you sanding to 320? 150 is fine ...

    Re: Clients are experts
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Yes I have price experts too. Although I have always thought it's a dangerous g ...

    Re: slr usage
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- My experience has been with Diehl saws, and when they are maintained, they are wonderful ...

    Re: this just in
    A message posted at WOODWEB's Business and Management Forum (8/17) -- This is just observational Pat. As the grocery store industry suffers the margi ...

    Re: 3M respirator filter for Conversion varnish
    A message posted at WOODWEB's Finishing Forum (8/17) -- For the high pressure systems, you have a couple options. 1. They make portable boxes that pr ...

    slr usage
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- i'll preface this by saying i never worked for another shop so i don't have anyone else's ...

    Re: this just in
    A message posted at WOODWEB's Business and Management Forum (8/17) -- I don't think Amazon is going to make any effort to go after low density market ...

    Re: Definition of an Ellipse?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- David, Your spiderweb-curves were common more than 50 years ago (as you've al ...

    Re: this just in
    A message posted at WOODWEB's Business and Management Forum (8/17) -- If its 40 miles to the nearest store I doubt you get 1 or 3 hour fresh delivery ...

    Re: Definition of an Ellipse?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- Cut a cone with an inclined plane. Let the long length of the bisected cone, ...

    Clients are experts
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Is it me or am I one of the lucky ones that have clients that are experts on pr ...

    Re: Shooting ICA Polyurathane
    A message posted at WOODWEB's Finishing Forum (8/17) -- Seems like it would be pretty expensive to mix enough product to spray a sample using the Kre ...

    Re: Shooting ICA Polyurathane
    A message posted at WOODWEB's Finishing Forum (8/17) -- What ica product code are you using? is it 2 component or mono component? I have used it with ...

    Re: this just in
    A message posted at WOODWEB's Business and Management Forum (8/17) -- I'm sure you think it is observational, your posts are subjective. Marginal pro ...

    Re: Transition from Autocad to Wood cad/cam or Giotto or BSolid
    A message posted at WOODWEB's CAD Forum (8/17) -- Dear Gary I saw quite a lot of people talking about Microvellum too, thanks for your suggestion. Ho ...

    Re: Definition of an Ellipse?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- A true ellipse may be generated by either an inclined plane bisecting a cylin ...

    Re: How do you handle job-specific hardware components, logistically, in sh
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- Excellent points Cabmaker. It's almost like you've been in our shop ;) we do use a shelf ...

    Re: this just in
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Paccar is also experimenting with drones for delivering parts to Kenworth & ...

    Shooting ICA Polyurathane
    A message posted at WOODWEB's Finishing Forum (8/17) -- I have a large China Cabinet to finish made from stained Crotched Mahogany. I will be using a ...

    Favorite gun cleaning brushes/kits??
    A message posted at WOODWEB's Finishing Forum (8/17) -- What are your favorite brushes for cleaning spray guns? We spray conversion varnish which can ...

    Re: Definition of an Ellipse?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- Since we're on the topic of Cones and Ellipses I don't know why I didn't thin ...

    Re: Exterior Wood Door Questions
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- Don't mean to hijack, but on those narrow mullions and muntins, how would you ...

    Re: 3M respirator filter for Conversion varnish
    A message posted at WOODWEB's Finishing Forum (8/17) -- For those that use the Allegro half mask system, or similar how do you deal with the hose? I ...

    Re: this just in
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Paul, I think Amazon is testing drone delivery in the UK. Google is testing in ...

    Re: this just in
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Pat, There is no doom & gloom in that post. It's just an observation. My bu ...

    Re: Favorite gun cleaning brushes/kits??
    A message posted at WOODWEB's Finishing Forum (8/17) -- I just use the cheap gun cleaning kit brushes bought off Ebay, they seem to work fine for me. ...

    Re: Particle board cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- We can provide you with all your cabinet needs, whether that be custom or box. Any box ma ...

    Re: Purple Stain
    A message posted at WOODWEB's Finishing Forum (8/17) -- Thanks. I am having a woodsong spray and wipe stain made up and have ordered some lockwood dy ...

    Re: Help with new edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- Do what Bruce said. Run a second piece behind it, but hold it back away from the glue edg ...

    Re: Clients are experts
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Wait till a couple of your customers compare prices. The one that paid what you ...

    Re: Favorite gun cleaning brushes/kits??
    A message posted at WOODWEB's Finishing Forum (8/17) -- I drop my tips in aircraft stripper for 10 minutes and the cv blisters off, then spray with a ...

    Re: Purple Stain
    A message posted at WOODWEB's Finishing Forum (8/17) -- I used Lockwood for years but they do fade fast if there is any kinda direct light on them. I ...

    Particle board cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- I am looking for a supplier of particle board or presswood cabinets for apartment type ho ...

    Re: this just in
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Why would Amazon make any effort at all in low density areas? The money is in c ...

    Re: Definition of an Ellipse?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- Keith, Nice art piece. I like the custom brass hinges and the ingenious, clam ...

    Re: Purple Stain
    A message posted at WOODWEB's Finishing Forum (8/17) -- We just had a weird Ben Moore dark blue matched in a MLC amazing stain spray only , they also ...

    Re: Purple Stain
    A message posted at WOODWEB's Finishing Forum (8/17) -- We just had a weird Ben Moore dark blue matched in a MLC amazing stain spray only , they also ...

    Re: How much you guys pay for solid surface sheets?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/17) -- depends on manufacturer. in canada white is 275 for formica, 550 for mid ...

    Re: this just in
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Please, 88% of retail stores are brick and mortar. Brick and mortar sales are g ...

    Re: Shooting ICA Polyurathane
    A message posted at WOODWEB's Finishing Forum (8/17) -- only benefit to using the cup gun would be easier to clean if it sets up on you. the air assi ...

    Biesse Edge Bander Saw Blades
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- I bought a used Biesse Akron 850 Edgebander and need to replace the front and rear trimme ...

    Re: Transition from Autocad to Wood cad/cam or Giotto or BSolid
    A message posted at WOODWEB's CAD Forum (8/17) -- Thanks David I think I would go for choosing software, writing ourself or outsourcing someone to do ...

    Black Cabinets
    A message posted at WOODWEB's Finishing Forum (8/17) -- I have a customer that wants me to refinish some cherry end tables and wants them black, what ...

    Re: Favorite gun cleaning brushes/kits??
    A message posted at WOODWEB's Finishing Forum (8/17) -- There are plenty of different kits on Amazon. I've been using one from Astro for years. Their ...

    Re: Puck Lighting
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- Around here in south western Ct most builders supply me with WAC lights , quality seems v ...

    ICA Cna stain base pricing
    A message posted at WOODWEB's Finishing Forum (8/17) -- ICA CNA stain bases price per litre is getting to be unaffordable. Where do you buy your stai ...

    Re: saw blade lubrication
    A message posted at WOODWEB's Sawing and Drying Forum (8/17) -- thanks. this is an old saw which never had anything for dispensing lube. ...

    Re: this just in
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Are you going to stick to the no doom and gloom narrative? ...

    Re: Definition of an Ellipse?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- Spiral? Nautilus? Vertigo? ...

    Re: Definition of an Ellipse?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- Perspective? ...

    Re: cnc nested machine
    A message posted at WOODWEB's CNC Forum (8/17) -- Biesse. Because it's a Biesse. ...

    Re: Black Cabinets
    A message posted at WOODWEB's Finishing Forum (8/17) -- you can buy black CV ...

    Re: Servo creep on CNT Motion Router
    A message posted at WOODWEB's CNC Forum (8/17) -- Sounds to me more like an EMP situation. Your controller, or as some call it, amplifier, may have p ...

    Re: Spiral carbide dovetail bit?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- If you see in my first post, I am looking to get a single flute cutter. Not a stan ...

    Gun Cleaner for cured Agualente Plus
    A message posted at WOODWEB's Finishing Forum (8/17) -- Yes, I know. Clean the gun immediately after use with water. That's what the MLCampbell info ...

    Re: Gun Cleaner for cured Agualente Plus
    A message posted at WOODWEB's Finishing Forum (8/17) -- GLC10 is what I think the line cleaner you spoke of. It will work. Get yourself an ultrasonic ...

    Re: Target Coating Waterborne finishes
    A message posted at WOODWEB's Finishing Forum (8/17) -- I used target coatings in my cabinet shop for about 6 years. Many of the products are great a ...

    Re: preventing yellowing in maple
    A message posted at WOODWEB's Finishing Forum (8/17) -- They are asking the impossible. No matter what you do it's going to change color. UV coatings ...

    Re: Considering Leasing my Shop
    A message posted at WOODWEB's WOODnetWORK Forum (8/17) -- I appreciate your reply. Suggesting that i wait is good sound advice. I was considering lea ...

    Re: preventing yellowing in maple
    A message posted at WOODWEB's Finishing Forum (8/17) -- nothing lasts forever especially the color of many woods when subjected to UV light...maple b ...

    Re: Spiral carbide dovetail bit?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Hi Andrew, the machine you have there uses an eccentric dovetail bit (the spindle ...

    Re: Dust evacuation nut
    A message posted at WOODWEB's CNC Forum (8/17) -- I have been thinking about this since I first read the post. We were discussing sweeping up the oth ...

    Shaper cutter for 5/16" bead
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Does anyone know where I can get a 3/4" bore shaper cutter with a 5/16" ...

    Re: preventing yellowing in maple
    A message posted at WOODWEB's Finishing Forum (8/17) -- You need a finish that has a dual UV package. One component slows down the yellowing of the f ...

    Re: Shaper cutter for 5/16" bead
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- These aren't the best, but they stock them. Believe it's the right size... https:/ ...

    Re: Spiral carbide dovetail bit?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Will any of the Vortex bits fit your machine? If not, I bet they can make you one. ...

    Re: Lead in to material
    A message posted at WOODWEB's CNC Forum (8/17) -- I use a 3/8" compression spiral, and I typically plunge the bit into the work until the upshea ...

    euro hinges for glass doors
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- My glass supplier says that the tempering process requires a tab that is twice the dimens ...

    sulphur fumigation candles
    A message posted at WOODWEB's Sawing and Drying Forum (8/17) -- Just read about using this to get read of PP and wanted to ask can this be used in th ...

    Re: Shaper cutter for 5/16" bead
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Add a power feeder on your router table and get the router bit. I love having a po ...

    Re: sanding with cnc
    A message posted at WOODWEB's CNC Forum (8/17) -- I used to use Craytex rods to put an engine turn finish on metals. They come in varying grits. Prob ...

    Re: CNC Table for Hire?
    A message posted at WOODWEB's CNC Forum (8/17) -- I used to work at DLM (formally Deleers) they have a few CNC's and would sometimes take on jobs lik ...

    Re: Parametric Programing for Frog 3D
    A message posted at WOODWEB's CNC Forum (8/17) -- Never liked canned repeat cycles so I just made a toolpath for each duplicated circle. That way I a ...

    Tormek t-8 White Mineral Oil Alternative
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Dear experts, could I use car lubrication oil for Engine instead? Thank you. ...

    Re: new shapers
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Look at adding a VFD to your shaper and you can make any speed you need to match t ...

    Re: preventing yellowing in maple
    A message posted at WOODWEB's Finishing Forum (8/17) -- whoops!, wood bleach would work better than oxalic acid in lightening the maple. ...

    Re: Pricing methods revealed
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- Wouldn't a more useful question be something like "How long does it take you to cut ...

    Re: What would you call a big gig?
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Mel - Your naivete is refreshing regarding the very top few % of the customer p ...

    Re: post cat clean up - boogers in top coat
    A message posted at WOODWEB's Finishing Forum (8/17) -- We take an extra step with our pumps.... we have around twenty+ assorted kremlin pumps with x ...

    Re: Drawing Layouts On Floor - NEW CONSTRUCTION
    A message posted at WOODWEB's CAD Forum (8/17) -- Here's a question to ask yourself? How many times have you discovered a mistake or a problem as a r ...

    Re: Grizzly
    A message posted at WOODWEB's WOODnetWORK Forum (8/17) -- When I started my commercial shop 11 years ago, I need the machinery as quickly and inexpen ...

    Re: Parts rack/cart
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- What you might want to consider is storing cabinet sides horizontally and having the vert ...

    Re: Shop floor motivation
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Chad, I agree that the time Coach was using to train new employees was time tha ...

    Storing cabinets over the winter
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- I have a kitchen coming up that will be completed in the fall, but due to some issues wit ...

    Re: Pricing methods revealed
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- ...and, so. What is the breakdown? As I see it, we can only gain knowledge from sharing i ...

    Re: post cat clean up - boogers in top coat
    A message posted at WOODWEB's Finishing Forum (8/17) -- shane, thanks for your help. i just ordered a five and look forward to running your method. o ...

    Re: a random prong test
    A message posted at WOODWEB's Sawing and Drying Forum (8/17) -- The prong test requires no moisture gradient. So, what happened was that the surface ...

    Re: Storing cabinets over the winter
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- Kevin, You will most likely be fine if the shop is a consistent 55-60. It the constant ch ...

    Re: post cat clean up - boogers in top coat
    A message posted at WOODWEB's Finishing Forum (8/17) -- We spray a barrage of coatings.... Architectural millwork.... We spray anything from pre-cat ...

    Re: exterior finish
    A message posted at WOODWEB's Finishing Forum (8/17) -- I do alot of formal mahogany doors,I use ICA ext. 2k. it amazing that someone hasn't come up ...

    Re: Feed back on "Anest Iwata spray Equipment"
    A message posted at WOODWEB's Finishing Forum (8/17) -- We have a kremlin with the excite gun and a cat bobcat. And a lvlp Iwata lv400 right now I ca ...

    Polyester
    A message posted at WOODWEB's Finishing Forum (8/17) -- Long time finisher 30 years plus, mainly pianos now, currently using urethanes mostly, P.P.G. ...

    Feed back on "Anest Iwata spray Equipment"
    A message posted at WOODWEB's Finishing Forum (8/17) -- I have a supplier coming to my cabinet shop this week. He wants to demo the Anest Iwata spray ...

    Re: What would you call a big gig?
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Mel asked, Ccrawford-- what does your shop produce? Is it residential cabinets? ...

    Re: vac pump replacement Vanes
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Thank You everyone. Will, its still running, but I have noticed were losing vac ...

    Re: Pricing methods revealed
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- I developed my own system several years ago, it works well for me. I price per linear inc ...

    Re: vac pump replacement Vanes
    A message posted at WOODWEB's Business and Management Forum (8/17) -- We just spent $3,800 to have our pump rebuilt by a Becker distributor. They use ...

    Re: vac pump replacement Vanes
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Mike We bought ours from here (http://www.cascade-machinery.com/) 6 yrs ago. Th ...

    Re: Pricing methods revealed
    A message posted at WOODWEB's Cabinetmaking Forum (8/17) -- If you are referring to my reply, you asked for a method and that's what I gave you. When ...

    Re: vac pump replacement Vanes
    A message posted at WOODWEB's Business and Management Forum (8/17) -- If you're in a pinch, you can get graphite sheet material from McMaster-Carr an ...

    Re: Feed back on "Anest Iwata spray Equipment"
    A message posted at WOODWEB's Finishing Forum (8/17) -- jp, i had a iwata 400 cup gun and upgraded to an aaa set up. i wouldn't go back to a cup gun ...

    Re: Tracking Labor activities in a 7 person Shop
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Brady: took a look at the website...not clear on how the Employee tracking work ...

    Adjusting tables on an scmi f 410
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Just picked up a 1997 F-410 and need to adjust the tables. No info in the download ...

    Re: What would you call a big gig?
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Hey Pat! You've touched on govt intervention in business before. Wanted to ask- ...

    Re: Tracking Labor activities in a 7 person Shop
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Sure, but I don't want to do it here at the risk of it looking like a sales pit ...

    Re: Tracking Labor activities in a 7 person Shop
    A message posted at WOODWEB's Business and Management Forum (8/17) -- I had this same issue at my dad's shop, so I built some software and you can ge ...

    Re: post cat clean up - boogers in top coat
    A message posted at WOODWEB's Finishing Forum (8/17) -- shane - what are you guys spraying (2k, polyester, what)? where do you get the stuff you reco ...

    Re: Spray Only Stain and Wood Filler
    A message posted at WOODWEB's Finishing Forum (8/17) -- We use Zar wood filler which is latex. I use ngr stain and it works great. ...

    Re: vac pump replacement Vanes
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Let us know how it shakes out Mike, Any warning signs of it going ? ...

    Re: Polyester
    A message posted at WOODWEB's Finishing Forum (8/17) -- try Ilva products from Camger coatings. ...

    Re: Polyester
    A message posted at WOODWEB's Finishing Forum (8/17) -- Thanks Chris! ...

    Re: Hammer Felder saw
    A message posted at WOODWEB's Furniture Making Forum (8/17) -- We have a k500s and have been running it for 4 years now. It is a good saw and I will ...

    Re: Thick, Large Black Walnut Slabs
    A message posted at WOODWEB's Sawing and Drying Forum (8/17) -- Richard you have a working understanding of what an air conditioning system is - It's ...

    Re: Festool TS 75 Saw vs New Table Saw
    A message posted at WOODWEB's Furniture Making Forum (8/17) -- Festool makes a good saw for installations and the dust collection is excellent so it ...

    Re: Floating a ceiling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/17) -- Just my .02 but if your going to try to float it using redimixed youl ...

    Re: Thick, Large Black Walnut Slabs
    A message posted at WOODWEB's Sawing and Drying Forum (8/17) -- I didn't realize you have a DH in your AC....some do and some don't. Lack of mold doe ...

    Re: modern furniture
    A message posted at WOODWEB's Furniture Making Forum (8/17) -- Wood is in many ways an awkward material for furniture. Consider how simple it would b ...

    Re: is porter cable dovetail jig considered pro?
    A message posted at WOODWEB's Furniture Making Forum (8/17) -- Try them on the band saw. There's a method in Mark Duginske's book. I know it sounds g ...

    Re: Plank Veneer
    A message posted at WOODWEB's Veneer Forum (8/17) -- If the t&g pieces do not get glued together (wax the edges thoroughly) and are applied to bo ...

    Re: Floating a ceiling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/17) -- Comes down to accepting the Substrate, yes you can float depth in lay ...

    Re: Thinning Titebond II for slower set
    A message posted at WOODWEB's Furniture Making Forum (8/17) -- Elmer's white wood glue has decent open time. I used it for several years and it's che ...

    Re: Feed back on Hud-Son Oscar 328
    A message posted at WOODWEB's Sawing and Drying Forum (8/17) -- I would love to hear some more feed back from anyone who owns or has ran an Hud-son O ...

    Re: sent 6 blades off for resharp
    A message posted at WOODWEB's Sawing and Drying Forum (8/17) -- I can sharpen a blade a lot faster then having to roll them up,put them in a box and ...

    Re: sent 6 blades off for resharp
    A message posted at WOODWEB's Sawing and Drying Forum (8/17) -- That could be true,but my blades cut better than theres after resharp, and then the m ...

    Re: Thick, Large Black Walnut Slabs
    A message posted at WOODWEB's Sawing and Drying Forum (8/17) -- Any air conditioner is simply a large dehumidifier hence the need for condensate drai ...

    Re: Hammer Felder saw
    A message posted at WOODWEB's Furniture Making Forum (8/17) -- I have a K500. It's a fine saw and the sliding wagon is flawless in its function. The ...

    Re: sent 6 blades off for resharp
    A message posted at WOODWEB's Sawing and Drying Forum (8/17) -- Maybe if your just sharpening the tooth face but there is likely no way you can beat ...

    Re: What wood best to use?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- I would think a softwood with significant early/late growth density different ...

    Re: Floating a ceiling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/17) -- Before anyone says "Hey call the Drywall Guy" I am going to ...

    Re: Plank Veneer
    A message posted at WOODWEB's Veneer Forum (8/17) -- Thank you guys for the response to the question. I have talked customer into letting me build st ...

    Re: sent 6 blades off for resharp
    A message posted at WOODWEB's Sawing and Drying Forum (8/17) -- I sharpen my own but can in no way do it as cheaply as a service can. Time is money. ...

    Re: Floating a ceiling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/17) -- Thanks James Is there a limit to how much you can float out in terms ...

    Re: Floating a ceiling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/17) -- Yes James Its wavy. We will do our best to cheat the crown but there ...

    Re: Size of pedestal base
    A message posted at WOODWEB's Furniture Making Forum (8/17) -- Finished table in their home. ...

    Re: widebelt grits
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/17) -- I use 80 and 120 also but on my General 24" I take very light cu ...

    Re: Corner rounding 3mm PVC
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/17) -- there is no bearing on the bottom of the bit for a machne like this. it ...

    Re: yield loss
    A message posted at WOODWEB's Value Added Wood Processing Forum (8/17) -- we chop stock sizes and use one length for different sizes. example we may ...

    Re: Blushing troubles
    A message posted at WOODWEB's Finishing Forum (7/17/25) -- Is your stain solvent or water base? We currently sent a job out unfinished, and the paint ...

    Re: CNC in high end residential
    A message posted at WOODWEB's CNC Forum (7/17/24) -- Yes, we do residential, although our main focus is high end commercial, hospitals, casinos, chur ...

    Re: Beaded Frames
    A message posted at WOODWEB's Solid Wood Machining Forum (7/17/24) -- I don’t do much cabinetry any more but was in an East coast shop a few years ag ...

    Re: Adjustable black cabinet legs for eurocabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/17/24) -- Screw on with rectangular base, but if you post a picture on alibaba, many vendors wil ...

    Re: Adjustable black cabinet legs for eurocabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/17/24) -- Screw on with rectangular base, but if you post a picture on alibaba, many vendors wil ...

    Re: Adjustable black cabinet legs for eurocabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/17/24) -- Rich, Are you that poor at business that saving $5 per base cabinet doesn't make sense ...

    Re: Adjustable black cabinet legs for eurocabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/17/24) -- JM, I didn't close my business from lack of funds. It was always profitable. How poorl ...

    transfer data from excel to my homag cnc
    A message posted at WOODWEB's Business and Management Forum (7/17/24) -- My business provide cut and edge band closets parts to closets installers. I ...

    Re: Dust collector remote
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (7/17/24) -- I've been using a wireless remote for my cnc dust collector fo ...

    Re: Adjustable black cabinet legs for eurocabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/17/24) -- Harold, Curious reference to God and wealth. I thought everyone learned the story of t ...

    Re: Adjustable black cabinet legs for eurocabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/17/24) -- Here is the invoice. Easy to order through alibaba and safe and guaranteed. ...

    Re: Adjustable black cabinet legs for eurocabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/17/24) -- Do they have the 10mm dowel knock in base, or are they screw on? ...

    Re: Sata gravity gun
    A message posted at WOODWEB's Finishing Forum (7/17/23) -- I'm a Sata spraygun fiend. I own and use 7 of them in the shop; 3 gravity guns and 4 press ...

    Re: Custom Kitchen Magnet Paint
    A message posted at WOODWEB's Finishing Forum (7/17/23) -- Here are some additional tips for using magnetic paint on kitchen cabinets: Use a primer: ...

    Re: Booth exhaust termination
    A message posted at WOODWEB's Finishing Forum (7/17/23) -- Below the link is the primary airflow it is 101 no degree is needed. Is this a professiona ...

    Re: New CNC Talent 5
    A message posted at WOODWEB's CNC Forum (7/17/23) -- You want a solid machine. I’m an Anderson fan. Fanuc controller and they just run without any is ...

    Re: millwork pricing
    A message posted at WOODWEB's Finishing Forum (7/17/23) -- The correct answer is...whatever your cost and profit margin combined equals. I've been at ...

    AC/Dehumidifier in home sprays with Milesi
    A message posted at WOODWEB's Finishing Forum (7/17/23) -- Does anyone incorporate a portable AC/dehumidifier unit in their in home sprays to speed u ...

    Efficiently creating drawings
    A message posted at WOODWEB's Cabinetmaking Forum (7/17/23) -- Hello all, I've been trying to get information on how I can work more efficiently crea ...

    Re: Looking to refinish marble table
    A message posted at WOODWEB's Finishing Forum (7/17/23) -- Here are some tips for refinishing a marble table: Use a soft cloth when sanding: This wil ...

    Re: Graining Markers
    A message posted at WOODWEB's Finishing Forum (7/17/23) -- its been my experience that you need to have clear coat on the surface before coloring dam ...

    Re: New CNC Talent 5
    A message posted at WOODWEB's CNC Forum (7/17/23) -- As well as being less than 1/4 the cost, my 20 year old Komo is more reliable and less expensive ...

    Re: Booth exhaust termination
    A message posted at WOODWEB's Finishing Forum (7/17/23) -- i have my exhaust going through a wall. During installation i thought I had to go over 20' ...

    Re: New CNC Talent 5
    A message posted at WOODWEB's CNC Forum (7/17/23) -- Yes your right Derek:) having more options and getting the work done faster would be the main th ...

    Need Wilsonart thermalfoil
    A message posted at WOODWEB's Cabinetmaking Forum (7/17/23) -- This didn't seem to post the first time. Anyone out there have 20 or more sheets of Wi ...

    Re: New CNC Talent 5
    A message posted at WOODWEB's CNC Forum (7/17/23) -- We pretty much got away from A new,. New CNC brand. too expensive for us. We are now looking at ...

    Re: Paper backed veneer wrinkling
    A message posted at WOODWEB's Veneer Forum (7/17/23) -- Thanks everyone. Ive always just ordered my panels pre veneered. just trying something. I wil ...

    Re: Finish Nomenclature
    A message posted at WOODWEB's Finishing Forum (7/17/23) -- If you remember how the other sheet was laid out, just type it out and copy...and take it ...

    Re: CNC Newby - Biesse rover 322 - XNC Controller
    A message posted at WOODWEB's CNC Forum (7/17/23) -- I am working on a post-processor using XNC controller. I would really appreciate it if someone c ...

    Re: New CNC Talent 5
    A message posted at WOODWEB's CNC Forum (7/17/23) -- Ha ha Derrek That made me laugh. Goes to show the excuses are the same even 3000 miles away in I ...

    Re: Factory Cabinet Suppliers
    A message posted at WOODWEB's Business and Management Forum (7/17/23) -- Koch and Co is in Seneca KS. You might give them a call. ...

    scm olampic K400 edgebender
    A message posted at WOODWEB's Cabinetmaking Forum (7/17/22) -- hello every one , i have a scm olampic k400 edgebending machine . but i dont have opra ...

    Re: Gravity gun for cv
    A message posted at WOODWEB's Finishing Forum (7/17/22) -- Jim The CAT X are great spray guns I don't own one but used one during one of my classes T ...

    Re: Teaching sanding
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17/22) -- Low angle lights have not been mentioned. All our sanders in training or n ...

    Re: Gravity gun for cv
    A message posted at WOODWEB's Finishing Forum (7/17/22) -- Have you used the newer cat x gun.I am also looking for gravity gun for same purpose.I hav ...

    Re: Sliding Altendorf F45 scoring blade not retracting
    A message posted at WOODWEB's Cabinetmaking Forum (7/17/22) -- possibly wrong size scoring blade? ...

    Re: Omnitech or Anderson Selexx Pal
    A message posted at WOODWEB's CNC Forum (7/17) -- X and Y values are just places in space where the tool is, so I'm not sure what you are asking, but ...

    Re: Wishy washy software
    A message posted at WOODWEB's CAD Forum (7/17) -- Pat. True Cabinet Vision is best when you are making cabinets. But, you can design and build many o ...

    Re: Crazing help
    A message posted at WOODWEB's Finishing Forum (7/17) -- Thanks for responses. I think it was the shellac that caused the crazing in this case since I ...

    Re: best bit for 1/2" baltic birch
    A message posted at WOODWEB's CNC Forum (7/17) -- Great for a while. We run them until they break :) I always use a down spiral for a dado, especiall ...

    Re: Good method for orange peel prevention
    A message posted at WOODWEB's Finishing Forum (7/17) -- Our MLC tech guys are really good. Did you call them? What did they recommend? Keep in mind s ...

    Re: Omnitech or Anderson Selexx Pal
    A message posted at WOODWEB's CNC Forum (7/17) -- After rereading your post, maybe I didn't answer your question correctly. I will post a picture of ...

    Re: best bit for 1/2" baltic birch
    A message posted at WOODWEB's CNC Forum (7/17) -- Thanks. Dropout, what kind of edge are you getting with the chip breaker? Also, shooting for a 1/8” ...

    Is powder coating on wood a thing?
    A message posted at WOODWEB's Finishing Forum (7/17) -- A long while ago people talked about it for mdf but what about wood veneer or solid stock? ...

    Re: Suggestion for a mini gun
    A message posted at WOODWEB's Finishing Forum (7/17) -- I'm useing a small compressor, 3 gal tank size. i do make sure it is an oil type. ...

    Re: Is powder coating on wood a thing?
    A message posted at WOODWEB's Finishing Forum (7/17) -- here ya go ...

    Re: " Barn Doors"
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- We liked the hangers and fittings from Penny at Better Barns. For some time t ...

    Re: SCM M3 Gang Rip Saw Chain Issue
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- The phenolic wears more to the inside as that is where most boards run. You c ...

    Re: " Barn Doors"
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- I’ve enjoyed the sliding barn door fad if that is what it is. Good hardware f ...

    Aspan Issue
    A message posted at WOODWEB's CNC Forum (7/17) -- To any one running aspan out there, when importing your tooling file in my case from xilog its brin ...

    Re: Industrial Edgebanding Machines: Which one?
    A message posted at WOODWEB's Cabinetmaking Forum (7/17) -- Who do you have techs in the area for? Edge banders are horrible, wretched machines, acce ...

    Industrial Edgebanding Machines: Which one?
    A message posted at WOODWEB's Cabinetmaking Forum (7/17) -- We are looking to purchase a new edgbander for our workshop and are undecided between a v ...

    Re: Wall cabinets: single unit or ganged
    A message posted at WOODWEB's Cabinetmaking Forum (7/17) -- I work alone and find that assembling one large unit takes a bit longer than assembling a ...

    Re: Wall cabinets: single unit or ganged
    A message posted at WOODWEB's Cabinetmaking Forum (7/17) -- One man shop here also. Smaller is better. Door spacing is no different on either one if ...

    Re: shop flooring
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (7/17) -- Unfinished fir plywood. Vinyl tile gets very slippery with saw du ...

    Re: Wall cabinets: single unit or ganged
    A message posted at WOODWEB's Cabinetmaking Forum (7/17) -- 5 doors 3 cabinets ...

    Re: Doing right by my employer
    A message posted at WOODWEB's Business and Management Forum (7/17) -- So, quick update. The neurologist I am seeing doesn't follow the dark room theo ...

    Re: Organizing/Labeling Job Materials
    A message posted at WOODWEB's Business and Management Forum (7/17) -- You likely have the person you need to do the receiving working for you already ...

    Re: Organizing/Labeling Job Materials
    A message posted at WOODWEB's Business and Management Forum (7/17) -- Thanks for the replies, all. We do use a job number and name. Our panel goods c ...

    Re: Exporting Lumber to China
    A message posted at WOODWEB's Business and Management Forum (7/17) -- It wouldnt seem difficult to find other local mills with vast experience. The m ...

    Exporting Lumber to China
    A message posted at WOODWEB's Business and Management Forum (7/17) -- Hi all, We are working on exporting lumber products (custom slabs, boards, plan ...

    Entry Door Thresholds
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- We currently use Pemko adjustable aluminum thresholds with wood top for our r ...

    Reducing Power Feed Speed
    A message posted at WOODWEB's Solid Wood Machining Forum (7/17) -- I have a Holz power feed that is built like a tank but it runs a little too fast f ...

    Reducing Power Feed Speed
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- I have a Holz power feed that I need to slow down for certain runs. I am look ...

    Re: Organizing/Labeling Job Materials
    A message posted at WOODWEB's Business and Management Forum (7/17) -- The companies that provide us with panels edge label each panel. Its real usefu ...

    New Cnc company
    A message posted at WOODWEB's CNC Forum (7/17) -- Looking for a possible cnc upgrade. Just checking to see who has a cnc from the company called New ...

    Re: Exporting Lumber to China
    A message posted at WOODWEB's Business and Management Forum (7/17) -- Should be getting easier from Canada since the US is playing games with tariffs ...

    Re: Honest Money Answers Please
    A message posted at WOODWEB's Business and Management Forum (7/17) -- What I am reading here is that you are looking for a way to operate your busine ...

    Re: Arched Door Pivot Hinges ?
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- Gary - You are right. Sort of. Visualize a segment arched door in a deep jamb ...

    Re: Arched Door Pivot Hinges ?
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- I see a lot of these pivot doors coming thru lately. They will not be around ...

    Re: Clear finish - reducing yellowing
    A message posted at WOODWEB's Finishing Forum (7/17) -- Bob mostly nailed it. Let's ignore the amber cast imparted by some finishes because it's most ...

    Re: Marketing
    A message posted at WOODWEB's Business and Management Forum (7/17) -- I always start with the people that are close to you. A local business networki ...

    Re: How bad is that bit
    A message posted at WOODWEB's CNC Forum (7/17) -- Chuck, I don't know what happened to that bit, I have seen staples in the edges of some of our mela ...

    Re: Color consistency and batch variations from paint vendors
    A message posted at WOODWEB's Finishing Forum (7/17) -- I tend to agree with you Shane, I think you pretty much nailed it. As much as I hate to admit ...

    Re: How bad is that bit
    A message posted at WOODWEB's CNC Forum (7/17) -- Chuck, We are cutting a lot of 2 sided melamine mostly but some pre-finished ply and veneers on PB. ...

    Re: Arched Door Pivot Hinges ?
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- I have been thinking about the mechanics of how an arched door could have a c ...

    Re: How bad is that bit
    A message posted at WOODWEB's CNC Forum (7/17) -- Gerry, Sounds like you have a bunch ot figured out already. With that Feed and Speed, that is a .01 ...

    Re: How bad is that bit
    A message posted at WOODWEB's CNC Forum (7/17) -- Gerry, What size parts are you cutting and what are your feeds and speeds? We have different carbid ...

    Re: How bad is that bit
    A message posted at WOODWEB's CNC Forum (7/17) -- Gerry, I would say the the bit with the 2 chips is from where the glue/laminate was. The magnificat ...

    Re: Clear finish - reducing yellowing
    A message posted at WOODWEB's Finishing Forum (7/17) -- WB will not yellow and will give you a better open pore definition than others products ...

    Re: Clear finish - reducing yellowing
    A message posted at WOODWEB's Finishing Forum (7/17) -- While you might choose a finish that won't yellow the wood under it will. ...

    Re: How bad is that bit
    A message posted at WOODWEB's CNC Forum (7/17) -- We use vortex bits and send them to vortex to be sharpened. Sharpened bits last as long as new. ...

    Re: Curved and angled seat back
    A message posted at WOODWEB's Cabinetmaking Forum (7/17) -- I did this one similar to what I think you are trying to do. This one has 2" of back ...

    Re: outdoor cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/17) -- I built some using pressure treated plywood for the boxes and then put a solild color fen ...

    Quarter sawn grain wrap
    A message posted at WOODWEB's Veneer Forum (7/17) -- I have a client who wants wall panels that wrap a bump out in her wall (panels will have mitered ...

    Re: how do i get closet jobs
    A message posted at WOODWEB's Business and Management Forum (7/17) -- Follow the previous advice so you have something to show off. Build a VERY simp ...

    Re: Low hanging fruit
    A message posted at WOODWEB's Business and Management Forum (7/17) -- Maybe you know this, Cabmaker, but I found Houzz is very responsive to activity ...

    Re: Full payment
    A message posted at WOODWEB's Business and Management Forum (7/17) -- Evan, I've seen enough of the "get big fast guys" go down the tubes t ...

    Re: CAD/CAM software for medium sized commercial millwork shops
    A message posted at WOODWEB's CAD Forum (7/17) -- Brian, Before I bought a new bore & insert machine I asked MV if they could provide a post for ...

    Re: Sliding Door Track for a Radiused Door
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- It it interesting to know that it is actually possible to use existing tracki ...

    Re: Quarter sawn grain wrap
    A message posted at WOODWEB's Veneer Forum (7/17) -- Thank you Charles. I should clarify, the grain is going to run horizontally. You think that no o ...

    Re: outdoor cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/17) -- I made a sign out of 3/4" MDO plywood 6 years ago and hung it on a chain link fence ...

    Re: CAD/CAM software for medium sized commercial millwork shops
    A message posted at WOODWEB's CAD Forum (7/17) -- Larry, You give up way too easily. I can accomplish things in Microvellum that most other software ...

    Re: Full payment
    A message posted at WOODWEB's Business and Management Forum (7/17) -- "Never work for GCs that are getting big really fast." True words to ...

    Re: outdoor cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/17) -- Another vote for MDO if you need structural and dont want the cost of starboard. I have s ...

    Re: Quarter sawn grain wrap
    A message posted at WOODWEB's Veneer Forum (7/17) -- If it's easier for you, just do it. No one will ever know, nor could anyone tell. For us we alwa ...

    Re: Quarter sawn grain wrap
    A message posted at WOODWEB's Veneer Forum (7/17) -- What kind of finish? Often the end grain will be darker when finished, so yes do a miter. ...

    Re: Quarter sawn grain wrap
    A message posted at WOODWEB's Veneer Forum (7/17) -- Oh. I would not make that call without seeing the material. Where are you located? ...

    Re: Project Manager
    A message posted at WOODWEB's Business and Management Forum (7/17) -- It really seems like what it boils down to is that you are looking for a buisne ...

    Re: Project Manager
    A message posted at WOODWEB's Business and Management Forum (7/17) -- There must hundreds of closet company designer/project managers in this country ...

    Cat AAA H2O and Tip clogging nitemare
    A message posted at WOODWEB's Finishing Forum (7/17) -- I am in the process of spraying 2000 sq ft of panels and doors for a full house project. I ha ...

    Re: DH kiln drying douglas fir beams and posts
    A message posted at WOODWEB's Sawing and Drying Forum (7/17) -- I hope you studied this out prior to such a large purchase.....Large beams aren't fea ...

    Pricing paint jobs
    A message posted at WOODWEB's Finishing Forum (7/17) -- Ok,i know this question has been asked before but I'm not asking how much to charge but how d ...

    Re: Project Manager
    A message posted at WOODWEB's Business and Management Forum (7/17) -- Chad, An important detail you left out is what your marketing channel is. Is it ...

    DH kiln drying douglas fir beams and posts
    A message posted at WOODWEB's Sawing and Drying Forum (7/17) -- I am purchasing a Nyle DH 200 kiln. I am interested in kin drying Douglas fir beams a ...

    Re: DH kiln drying douglas fir beams and posts
    A message posted at WOODWEB's Sawing and Drying Forum (7/17) -- To add: If the beams with your dad had been fully AD'd the twist shouldn't have happe ...

    Re: Production box miter cutting
    A message posted at WOODWEB's Cabinetmaking Forum (7/17) -- Cutting miter folds with a Vee bit isn't the greatest if that's what you are considering ...

    Re: open frameless cabinets
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- Well Bob. I'm not quite at 38 years but at 31 years and never having employee ...

    Re: open frameless cabinets
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- Leo, Well a couple of senior cabinet makers. Congratulations on your longevit ...

    Re: Project Manager
    A message posted at WOODWEB's Business and Management Forum (7/17) -- I agree with Cabmaker that there a minimum of two separate functions that have ...

    Re: Pricing paint jobs
    A message posted at WOODWEB's Finishing Forum (7/17) -- If this isn't your first kitchen, you should know how long it will take to spray. The variabl ...

    Ora Verde Unico
    A message posted at WOODWEB's Finishing Forum (7/17) -- I had a salesman come out and gave me quite a pitch for Chemcraft's Ora Verde Unico. Said the ...

    Re: open frameless cabinets
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- Find the wood, grade the wood, cut the wood, assemble the project, sand the p ...

    Re: open frameless cabinets
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- Ha ha. Thank you for being concerned for my career. I guess my problem is 38 ...

    Re: CAT AAA waterborne and solvent
    A message posted at WOODWEB's Finishing Forum (7/17) -- I have the H2O pump and all we spray is solvent. Difference is it comes with larger fluidhose ...

    Re: Valspar Zenith problems
    A message posted at WOODWEB's Finishing Forum (7/17) -- Turns out since we use dull or matte finish there is a lot of flattening paste used and has t ...

    Re: open frameless cabinets
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- I suggest you give up this career Bob. You don't have it in you. I don't have ...

    Re: Long runs of power cord for equipment
    A message posted at WOODWEB's Cabinetmaking Forum (7/17) -- Thanks to all who replied. Lots of really good info. ...

    Re: Project Manager
    A message posted at WOODWEB's Business and Management Forum (7/17) -- Whoops that should have read with no on the job training. ...

    Re: open frameless cabinets
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- Without a cnc and case clamp its to labor intense. ...

    Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/17) -- Mel launched an interesting thread a couple days ago about how people get paid. ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/17) -- Pay is tricky...and it truly resides in the eye of the beholder. At a previous ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/17) -- JWS--I asked to have the thread removed. There are some brilliant people on thi ...

    Cracking in MagnaKlear
    A message posted at WOODWEB's Finishing Forum (7/17) -- I had been using MagnaMax for several years with excellent results until one of my employees ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/17) -- I came up against the same thing when I started out in the veneer mill back in ...

    Re: Oregon white oak
    A message posted at WOODWEB's Sawing and Drying Forum (7/17) -- I am in Western Oregon as well. Oregon white oak trees that are only 8-12" dbh w ...

    Re: Coffered ceilings...
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- I have always tried to bring more work into my shop by proposing we do assemb ...

    sanding with orbital then block sanding
    A message posted at WOODWEB's Finishing Forum (7/17) -- I am working for a company and when sanding anything such as a 5 piece door or even a flat en ...

    sanding techniques
    A message posted at WOODWEB's Finishing Forum (7/17) -- I am working for a company and when sanding anything such as a 5 piece door or even a flat en ...

    Re: weinig quattromat 22
    A message posted at WOODWEB's Solid Wood Machining Forum (7/17) -- Hello all problem solved. Thank you so much for the replies and the e mails as wel ...

    Re: Coffered ceilings...
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- We pre-assemble as much as possible with the last end a job site fit. Make th ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/17) -- A shop has to be able to charge at least 5x what they pay the employee just to ...

    Re: Routed MDF Doors
    A message posted at WOODWEB's CNC Forum (7/17) -- I use a combination of KCD, Paranest, and Vcarve pro. Export a list of door sizes from KCD Import l ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/17) -- Waaaaaaaaiiiit a freakin second----- "I find it contradictory that a perso ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/17) -- I stated a while back that the way to get ahead was to find what was needed and ...

    Re: weinig quattromat 22
    A message posted at WOODWEB's Solid Wood Machining Forum (7/17) -- I would call Weinig, In my recollection the quattromat should have a rebate cutter ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/17) -- interesting topic. re: your experience as dishwasher- i worked in a window shad ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/17) -- Pat--it's totally fine if you'd hate having an employee like me. Pesky asker of ...

    Re: Direct Import of Machinery
    A message posted at WOODWEB's Business and Management Forum (7/17) -- I haven't. But a friend of mine owns a small business and he took a trip to Chi ...

    Re: sanding techniques
    A message posted at WOODWEB's Finishing Forum (7/17) -- I would say that sanding up to 180 is a wasted effort if the last step in the sanding schedul ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/17) -- "A shop has to be able to charge at least 5x what they pay the employee ju ...

    Re: Air compressor
    A message posted at WOODWEB's Finishing Forum (7/17) -- Check the piston relief valve. When the compressor stops, there should be a small hiss of air ...

    Re: Built-in microwave
    A message posted at WOODWEB's Cabinetmaking Forum (7/17) -- What James said, but I would suggest you just say 'it' (specs) say no, and so do you. If ...

    Re: Hardware for joined doors
    A message posted at WOODWEB's Cabinetmaking Forum (7/17) -- Just a caution on the Soss hinges. They do sag over time, sometimes a short time. There a ...

    Re: sanding with orbital then block sanding
    A message posted at WOODWEB's Finishing Forum (7/17) -- Scott, go farther down to an excellent post dated 2-1 , "sander issues" They cover ...

    Re: Post Cat over Linseed Oil
    A message posted at WOODWEB's Finishing Forum (7/17) -- not sure if you found your answer , but word on the web is that it will work as long as the o ...

    Fire Rated Panels
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- I need a source for fire rated panels. These need to have the retardant mater ...

    Re: sanding techniques
    A message posted at WOODWEB's Finishing Forum (7/17) -- I do know some people that does a final Sanding with a lower grits But 100 g is a little too ...

    Re: Coffered ceilings...
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- Do your trim carpenters a favor -- run a couple of extra sticks and set them ...

    Scm Si400 Nova
    A message posted at WOODWEB's Solid Wood Machining Forum (7/17) -- we are looking to buy this machine we are a small shop and have maybe 2 hours for ...

    Re: Fire Rated Panels
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- Just Google "fire-rated MDF" there are several good manufacturers o ...

    Re: Routed MDF Doors
    A message posted at WOODWEB's CNC Forum (7/17) -- What are you guys using to program your nested patterns of these MDF Doors? I'd love to know that. ...

    Re: 8" sander for large painted panels?
    A message posted at WOODWEB's Finishing Forum (7/17) -- Thanks Jim, that's very helpful. I haven't seen the Fein yet, I imagine it's a good machine. ...

    Direct Import of Machinery
    A message posted at WOODWEB's Business and Management Forum (7/17) -- Has anybody out there used Alibaba to source machinery directly from the manufa ...

    Re: Air compressor
    A message posted at WOODWEB's Finishing Forum (7/17) -- Thank you Jim, and were I find the piston relief valve? ...

    Re: vertical sliding doors
    A message posted at WOODWEB's Cabinetmaking Forum (7/17) -- Thanx for the feed back. ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/17) -- I forgot to add this file: ...

    Avonite gloss finish
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/17) -- We are finishing Avonite (very black with little pattern) countertops to ...

    Alternating glossiness in solid surface
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/17) -- We are finishing Avonite black color solid surface to gloss. We keep see ...

    Re: extira and gingerbread
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- I can't imagine it being a good idea. We've used it for flat panels and the t ...

    Re: extira and gingerbread
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- We were doing testing on some chunks and had them soaking in water for a whil ...

    extira and gingerbread
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- Have any of you turned extira for spindles in gingerbread/victorian exterior ...

    Re: Avonite gloss finish
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/17) -- For what it's worth we had a job with black Corian and could not get a d ...

    Re: extira and gingerbread
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- Have any experience turning this stuff on the lathe? ...

    Re: Fluorescent Glue
    A message posted at WOODWEB's Adhesives Forum (7/17) -- Yes ...

    Larch / Tamarack properties
    A message posted at WOODWEB's Value Added Wood Processing Forum (7/17) -- Does anyone have any experience finishing larch / tamarack (Larix laricina) ...

    Re: Larch / Tamarack properties
    A message posted at WOODWEB's Value Added Wood Processing Forum (7/17) -- Larch is use for do flooring look at : www.planchersancestral.com ...

    Veneer ply with 1/8” mdf outer skins
    A message posted at WOODWEB's Cabinetmaking Forum (6/17/25) -- I have used 3/4” ply with the 1/8” mdf on both sides but no veneer on top just raw mdf ...

    Re: Drilling at an Angle
    A message posted at WOODWEB's CNC Forum (6/17/25) -- For this using are Campus Hops software you first need to use a free view and rotate the XYZ pla ...

    Re: Veneer ply with 1/8” mdf outer skins
    A message posted at WOODWEB's Cabinetmaking Forum (6/17/25) -- I'm not sure I'd use it for doors. Great for finished ends or drawer fronts, but I wou ...

    Corian
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/17/25) -- Has anyone used a half lap joint to seam Corian I tried it and seams ...

    Re: Drilling at an Angle
    A message posted at WOODWEB's CNC Forum (6/17/25) -- Seems you lost interest in your project. I thought I had this on my YouTube channel, but had to ...

    Re: Veneer ply with 1/8” mdf outer skins
    A message posted at WOODWEB's Cabinetmaking Forum (6/17/25) -- That’s pretty much all I had to hear Karl, thanks for reply. ...

    Re: P2P in a small shop
    A message posted at WOODWEB's CNC Forum (6/17/24) -- It's cool to hear about how advanced Xilog was even 25 years ago. Those parametric features soun ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (6/17/24) -- The only time I think about using polyurethane glue is when I need waterproof joinery. I m ...

    Re: Looking For A Finishing Consult
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/17/24) -- You can contact me if you like, retired chemical coatings engineer, i ...

    Re: Moulding Mahogany
    A message posted at WOODWEB's Solid Wood Machining Forum (6/17/24) -- Plus don't be surprised if you get a lot of surface fuzz with the Af. Mahog. An ...

    Re: Bleaching walnut
    A message posted at WOODWEB's Finishing Forum (6/17/24) -- Probably way to late to be of help, but if your having troubles, contact me, I will be ple ...

    Re: Router Speed Controller
    A message posted at WOODWEB's Cabinetmaking Forum (6/17/24) -- That is something I don't know. I regret not taking the electronics classes in high sc ...

    Re: Bleaching walnut
    A message posted at WOODWEB's Finishing Forum (6/17/24) -- Thanks all. Not sure where this will end up shaking out but thanks all for the suggestions ...

    Re: Router Speed Controller
    A message posted at WOODWEB's Cabinetmaking Forum (6/17/24) -- Just buy a variable speed router? You can never have too many routers in the shop. ...

    Re: Tried and true
    A message posted at WOODWEB's Finishing Forum (6/17/24) -- Proven and reliable. ...

    Grow the business, sell out or something else?
    A message posted at WOODWEB's Business and Management Forum (6/17/23) -- Hi I have a small furniture/cabinetry/cnc shop. 1 FTE, 1 PTE and me. Both em ...

    Re: Grow the business, sell out or something else?
    A message posted at WOODWEB's Business and Management Forum (6/17/23) -- I know you want experienced wisdom but it’s very tough with the information ...

    Re: Grow the business, sell out or something else?
    A message posted at WOODWEB's Business and Management Forum (6/17/23) -- Rich Thanks for the response. In this situation they have a business selling ...

    Re: I read Dave's book and made my first entry door
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17/23) -- The traditional rung layout requires two drilling patterns; two of one ‘di ...

    Re: Grow the business, sell out or something else?
    A message posted at WOODWEB's Business and Management Forum (6/17/23) -- I really don't see that you have any leverage with the offer. They have a su ...

    Re: Gluing doors
    A message posted at WOODWEB's Cabinetmaking Forum (6/17/23) -- If you are using a water based glue then you need to let the moisture from the glue jo ...

    Looking for advice whether to paint wood siding or pressure wash and sealin
    A message posted at WOODWEB's Finishing Forum (6/17/23) -- Hi everyone, new to the forum. I have a new client who has a house exterior made of wood s ...

    Re: Sanding square Cabinet Door Edges
    A message posted at WOODWEB's Cabinetmaking Forum (6/17/23) -- I think the best way to do it is to cut your doors 1/8” oversized. Then even if they a ...

    Re: I read Dave's book and made my first entry door
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17/23) -- It looks great, FWIW I hear some younger guys have success selling their s ...

    Re: Gluing doors
    A message posted at WOODWEB's Cabinetmaking Forum (6/17/23) -- Sounds like moisture coming out from the glue. How long do you leave your doors to dry ...

    Re: Gluing doors
    A message posted at WOODWEB's Cabinetmaking Forum (6/17/23) -- You're propaply getting glue creep. If i had to guess you are using titebond 2 try usi ...

    Re: Grow the business, sell out or something else?
    A message posted at WOODWEB's Business and Management Forum (6/17/23) -- You are very kind Dave, thank-you! ...

    Gluing doors
    A message posted at WOODWEB's Cabinetmaking Forum (6/17/23) -- Glue beads up on my joints after applying. paint ...

    Check out this Chinese CNC. Looking for opinions
    A message posted at WOODWEB's CNC Forum (6/17/22) -- Check on these specs on a generic Chinese CNC. Would you guys pay $13,000 for a machine like thi ...

    Re: Hook angle vs cutting angle results?
    A message posted at WOODWEB's Solid Wood Machining Forum (6/17/22) -- Thanks for the replies! It turns out I wasn't understanding the tool maker prop ...

    Re: Milling Compact Laminate
    A message posted at WOODWEB's CNC Forum (6/17/22) -- We do some toilet cubicle work in 13mm compact. We normally saw the panels on a beam saw as I'd ...

    Re: prime walnut yield
    A message posted at WOODWEB's Cabinetmaking Forum (6/17/22) -- Funny to me that wholesale distributors can make up any marketing name they want. Make ...

    Re: Check out this Chinese CNC. Looking for opinions
    A message posted at WOODWEB's CNC Forum (6/17/22) -- Lack of brand name on spindle, vacuum pump and I have not heard of the drive brand makes me lear ...

    Re: Motor brake for table router.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/17/22) -- A miter saw switch disconnects the power while shorting out the motor. The shor ...

    Re: prime walnut yield
    A message posted at WOODWEB's Cabinetmaking Forum (6/17/22) -- Those grading standards only apply to mills that adhere to the NHLA grading, hence pri ...

    Motor brake for table router.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/17/22) -- How can I build a 110v motor brake for a 1.75hp table router. I want the router ...

    Re: tips for un-backed veneer without a vacuum press
    A message posted at WOODWEB's Veneer Forum (6/17/22) -- So I bought a vac system, some ppr glue, and had a go. Overall, useable panels and a new skil ...

    Re: Check out this Chinese CNC. Looking for opinions
    A message posted at WOODWEB's CNC Forum (6/17/22) -- If you have a guy who is experienced in Biesse or Homag buy a used one. There are always deals t ...

    Re: Check out this Chinese CNC. Looking for opinions
    A message posted at WOODWEB's CNC Forum (6/17/22) -- I like the "Heavy duty thick" option. If you have $13k to gamble and don't mind losing ...

    Engineered flooring
    A message posted at WOODWEB's WOODnetWORK Forum (6/17/22) -- It has been years since I have installed engineered wood flooring I would like to know w ...

    Re: prime walnut yield
    A message posted at WOODWEB's Cabinetmaking Forum (6/17/22) -- For panels, you don't need high grades. The short cuttings can come from #1 common if ...

    Re: Duct work
    A message posted at WOODWEB's Business and Management Forum (6/17/22) -- http://www.dustpipe.com/ - Contact Bryan - Very knowledgeable and has helped ...

    Re: Milling Compact Laminate
    A message posted at WOODWEB's CNC Forum (6/17/22) -- I never had a need for a thermal chuck. ...

    Re: prime walnut yield
    A message posted at WOODWEB's Cabinetmaking Forum (6/17/22) -- This might help. ...

    Re: Lumber pricing
    A message posted at WOODWEB's Sawing and Drying Forum (6/17) -- Sorry Tim I didn't respond as I thought some whom saw for a living would have chimed ...

    Wb coatings-AAA or pressure pot and HVLP gun
    A message posted at WOODWEB's Finishing Forum (6/17) -- I have sprayed solvent based finishes for years, MLC, Mohawk, ChemCraft, SW and started out w ...

    Re: Wishy washy software
    A message posted at WOODWEB's CAD Forum (6/17) -- The biggest fallacy in software is it’s everything out of the can to everyone. My stone guys hate C ...

    Re: Solid surface miterfold on the shaper
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/17) -- I really have done very little solid surfacing but tons of wood in this ...

    Re: New CNC Machine in $2k-$3K Range
    A message posted at WOODWEB's CNC Forum (6/17) -- There are several entry or lower level machines at that level, which are good machines for the pric ...

    Re: Adhesive Testing
    A message posted at WOODWEB's Adhesives Forum (6/17) -- We take 1 x 4 (3/4” x 3 1/2” maple and glue up a couple of samples of edge and butt joints. L ...

    Re: Thinking of CNC Machine
    A message posted at WOODWEB's Furniture Making Forum (6/17) -- Your estimate is off by a factor of 5. You could buy a hobby machine and make it work ...

    Solid surface miterfold on the shaper
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/17) -- We've got about 1000 linear feet of miterfolding to do on narrow (6" ...

    Kapex mitersaw
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- I have the kapex The head of the saw gets stuck and literally won’t pull down. I’ve tried ...

    Re: Biesse general questions
    A message posted at WOODWEB's CNC Forum (6/17) -- We just loaded out a Rover 30 that we have had for 8 years. Was down a total of 4 days from the tim ...

    Re: Wb coatings-AAA or pressure pot and HVLP gun
    A message posted at WOODWEB's Finishing Forum (6/17) -- Just wondering what product you are spraying, secondly where are you spraying and what are th ...

    Thinking of CNC Machine
    A message posted at WOODWEB's Furniture Making Forum (6/17) -- I would like to purchase a machine to do small carvings that will go on some of the pr ...

    Re: Wb coatings-AAA or pressure pot and HVLP gun
    A message posted at WOODWEB's Finishing Forum (6/17) -- I've been using a TriTech T5 airless to spray pigmented WB and have been getting great result ...

    Re: CV as a wall covering
    A message posted at WOODWEB's Finishing Forum (6/17) -- Yes, exterior is aluminum, insides is lined with some kind of plastic or vinyl skin, that’s w ...

    Re: Biesse general questions
    A message posted at WOODWEB's CNC Forum (6/17) -- 2004 is pretty old for a Biesse. If the O.S. can't be upgraded, I would shy away from it. If the ma ...

    Re: CV as a wall covering
    A message posted at WOODWEB's Finishing Forum (6/17) -- Aren't Airstreams made of aluminum? In that temp range there is going to be a ton of movement ...

    Re: Laundry cabinet drying rack lattice
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Eplastics was the answer. Thanks for the suggestions. ...

    Re: Solid surface miterfold on the shaper
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/17) -- Correction 91 degrees not 94. ...

    Re: Operational assembly time studies
    A message posted at WOODWEB's Business and Management Forum (6/17) -- I don't know if AWI has recent operations for different equipment and methods. ...

    Re: Mozaik versus CabinetVision
    A message posted at WOODWEB's CNC Forum (6/17) -- Yes I agree with you on a user supported Mozaik forum. The Mozaik forum is at times restrictive, bu ...

    Phones, Bathroom,.... Again I know..
    A message posted at WOODWEB's Business and Management Forum (6/17) -- I know this subject has come up before in various incantations and as parts of ...

    HELP: Picking a 12" Jointer in Canada
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Hi everyone, Ive been working on my 6" jointer for a while now and have felt the res ...

    Re: Phones, Bathroom,.... Again I know..
    A message posted at WOODWEB's Business and Management Forum (6/17) -- MarkB: You might address it to them as the adults that they supposedly are, and ...

    Re: Mozaik versus CabinetVision
    A message posted at WOODWEB's CNC Forum (6/17) -- 2 1/2 yrs ago I purchased a new cnc. I used cabnetware for 18 years and was satisfied with it but a ...

    Re: Mozaik versus CabinetVision
    A message posted at WOODWEB's CNC Forum (6/17) -- On this subject ! I often hear "Customer service is Bad" or I cannot get them on the phon ...

    Re: HELP: Picking a 12" Jointer in Canada
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Just my opinion, I would not touch a single brand mentioned. Consumer grade stuff. I've g ...

    Grizzly Machine Service in New York
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/17) -- Hello all. I am looking for someone to come to a residence in Pou ...

    Re: HELP: Picking a 12" Jointer in Canada
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- hey karl, so ive looked at all these companys just now, and noticed two more options from ...

    Re: Boring bit length for dowel boring machine
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- 57 mm is usually for dowels, we use 70 mm for 5mm holes for confirmat screws which usuall ...

    Re: Mozaik versus CabinetVision
    A message posted at WOODWEB's CNC Forum (6/17) -- Thanks for the replies. That's the reason we started with Mozaik over any others, the adaptability ...

    Re: Mozaik versus CabinetVision
    A message posted at WOODWEB's CNC Forum (6/17) -- There are a lot of people switching from cabinet vision to Mozaik. People have thousands invested i ...

    Re: Phones, Bathroom,.... Again I know..
    A message posted at WOODWEB's Business and Management Forum (6/17) -- P.S. I am not in a market with a type of work, or access to a waiting list of p ...

    Re: Material storage ideas
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- The main sheet good supplier we use delivers Monday, Wednesday, and Friday. They are abou ...

    Re: HELP: Picking a 12" Jointer in Canada
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Is your business small enough to use hobbyist equipment successfully? None of those will ...

    Re: Operational assembly time studies
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Sorry, A bunch of the pages were blank ...

    Re: Schedule Adjusments
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Thanks guys, We do convey the impact immediately however as I eluded to, while ...

    Re: swelling in cabinet doors
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Thanks to everyone who responded to my post, very helpful information. I have another que ...

    Re: Why would 5mm shelf pins have a "bulge" in them that make them hard to
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Dan, thanks for your reply. I'm glad to know I'm not the only one that thinks this isn't ...

    Re: Fold down dining room table
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- It is difficult for a small shop to replicate things that are mass-produced since they ar ...

    Re: Cerused wire Brush
    A message posted at WOODWEB's Furniture Making Forum (6/17) -- I recently purchased a Makita wire brush. It comes with a coated brush, and I also pur ...

    Kreg Faceframe Table Setup/Suggestions
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- I am about to receive my first faceframe table. I was able to find a lightly used on on t ...

    Wooden sink
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- Have any of you ever made one? What do you use as a finish? Obviously boats h ...

    Re: CNC Software
    A message posted at WOODWEB's CNC Forum (6/17) -- Hello Daniel, please check out the Software solution EZ-WinDoor which is designed for the residenti ...

    Re: Sherwood HB CV?
    A message posted at WOODWEB's Finishing Forum (6/17) -- Yes... This is an excellent varnish! It's essentially the Becker Acroma Matador that Sherwin ...

    Re: Looking for right pellet glue for formica with my edge bander
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- I prime laminate with thinned pva glue. About 50/50. Let dry and run your standard pellet ...

    Re: Schedule Adjusments
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Mark the value of doing a labor and material CO is you can identify all the ste ...

    Re: Modifying v67 repots
    A message posted at WOODWEB's CAD Forum (6/17) -- Yep, the negative material type in the hardware list will do it. As is often the case, I blew right ...

    Re: Looking for right pellet glue for formica with my edge bander
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- James, I’m waiting for a call back from the manufacturer of that EB and see what their in ...

    Master bed
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Latest Architectural drawings show the master bed on tracks Has anyone seen any motorized ...

    Re: CNC Software
    A message posted at WOODWEB's CNC Forum (6/17) -- Wally Bergen, thanks for the info. What are we looking at for pricing on your software? Please send ...

    Re: Looking for right pellet glue for formica with my edge bander
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- What is reccomended heat, I thought kleibert was 200-220 is glue to thin ? ...

    Re: Master bed
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- King size bed located in the master bedroom the owner would like to move his bed from one ...

    Re: Airless Sprayer
    A message posted at WOODWEB's Finishing Forum (6/17) -- Small shop here (1400 sq') Magnum X5? I use it for WB primers & Latex. Never had a larger ...

    Re: Sherwood HB CV?
    A message posted at WOODWEB's Finishing Forum (6/17) -- yes.. I reduce it with about 20-25% butyl acetate.. 5% butyl cellosolve and I use the Slow ca ...

    Re: Master bed
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- What is a "master bed"? Any different from a large bed for sleeping? ...

    Re: Sherwood HB CV?
    A message posted at WOODWEB's Finishing Forum (6/17) -- 20% right? I noticed there was no viscosity reference on the data sheet. ...

    Re: Financing projects
    A message posted at WOODWEB's Business and Management Forum (6/17) -- We have considered this in the past. Worth looking into. ...

    Re: CNC Software
    A message posted at WOODWEB's CNC Forum (6/17) -- Adding some flush doors w/ v grooves. ...

    Re: introducing a business partner
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Taken on a partner? Sort of. Twice. Two different businesses (neither wood-work ...

    Re: V Carve and Automation
    A message posted at WOODWEB's CAD Forum (6/17) -- Vectric has a very aggressive, active, and knowledgeable, forum that may be a good place to cross p ...

    Re: V Carve and Automation
    A message posted at WOODWEB's CAD Forum (6/17) -- Yes. Though the nest would of course vary based on what mix of parts you are nesting (seems obvious ...

    Re: introducing a business partner
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Oh yeah, run away from that guy before there is a chance to sign any kind of co ...

    Re: tools from the past
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- I had a long sliver come out of a radial arm saw while ripping, and it stuck in my abdome ...

    V Carve and Automation
    A message posted at WOODWEB's CAD Forum (6/17) -- I currently work for a company using V Carve Pro. We do the same parts everyday. The product never ...

    Cutting Marine Grade Poly
    A message posted at WOODWEB's CNC Forum (6/17) -- We are using an onsrud 52-701 for cutting plastic. The current speeds seem slow 200 IPM spindle at ...

    Re: tools from the past
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- I have all the latest in CNC technology and it is great, but sometimes an old tool is the ...

    Re: pocketing flat panel MDF doors
    A message posted at WOODWEB's CNC Forum (6/17) -- I learned to cut around the outside of my doors leaving a skin as my first step. I then do all my o ...

    Re: V Carve and Automation
    A message posted at WOODWEB's CAD Forum (6/17) -- "Those lead-in's and lead-out's should be in the toolpaths themselves." Should have been ...

    Re: V Carve and Automation
    A message posted at WOODWEB's CAD Forum (6/17) -- Thanks Mark. As far as nesting is concerned will the software automatically put the parts on the sh ...

    SCM Pratix
    A message posted at WOODWEB's WOODnetWORK Forum (6/17) -- Help needed! Can’t recall how to open the side doors (interlocked tool bay) from the HMI or ...

    Re: V Carve and Automation
    A message posted at WOODWEB's CAD Forum (6/17) -- Mark thanks for the insight. Tomorrow I'll look into the tutorials. You have been helpful. ...

    Re: Tooling
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- Ballew Saw and Tool or CG Schmidt ...

    Re: Tooling
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- CT Saw & Tool ...

    VBA Alphacam
    A message posted at WOODWEB's CAD Forum (6/17) -- I have a number of repetitive tasks that I would like to automate and it seems the best way to do t ...

    Re: Small molders, Williams & Hussey, Shop Fox
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- You just described a Woodmaster planer/molder. We have one of those as well. I've got an ...

    Re: Proposal/estimate example
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Don't get too crazy trying to add science to your estimating until you have sci ...

    Re: Striping in cv
    A message posted at WOODWEB's Finishing Forum (6/17) -- we spray kemvar exclusively. About 150 gallons a week. The only time we see stripping is when ...

    Re: Commercial construction methods
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- I am not sure if what you are describing is the same as what I am thinking, but the one c ...

    Re: Small molders, Williams & Hussey, Shop Fox
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- I have the W&H with vari feed. It is enough molder for me. I do wish it came with a c ...

    Bedding glass in water cutoff?
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- We have a couple small carriage house doors to build that have 6TDL and wood ...

    advice and sawing and drying
    A message posted at WOODWEB's Sawing and Drying Forum (6/17) -- I have an opportunity to purchase a large poplar that has burls wrapped all around it ...

    Re: Proposal/estimate example
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Some states do not charge tax on labor. That would be the only reason to break ...

    Re: PVC Edgebanding vs laminate
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- I'm with Larry, but we use a tom of .018 due to peoples budgets Once you get a good bande ...

    Re: Dowel laminated timber
    A message posted at WOODWEB's Business and Management Forum (6/17) -- I dont know for sure about the FDM+C but I always thought it was the merge of F ...

    Re: How crooked is to too much
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/17) -- You are not alone. We are going through this sort of thing on a hospi ...

    Re: CNC for wood sculpting
    A message posted at WOODWEB's CNC Forum (6/17) -- I recommend the Total Cut RTS or RTD Router. The RTS is a standard duty router that is heavier than ...

    Re: Proposal/estimate example
    A message posted at WOODWEB's Business and Management Forum (6/17) -- I have 16 employees and run estimates on Quickbooks and just plug in a "ca ...

    CNC routing services near Woodland Hills CA
    A message posted at WOODWEB's Furniture Making Forum (6/17) -- Hi everyone, I'm looking for a recommendation. Does anyone know of (preferably with ex ...

    Re: Proposal/estimate example
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Cabinetmaker is correct. As far as the customer is concerned the sell price has ...

    Re: Dowel laminated timber
    A message posted at WOODWEB's Business and Management Forum (6/17) -- I believe the magazine used to be Furniture Design & Manufacturing and when ...

    Re: Dowel laminated timber
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Mark B "it sequestered 1655kg of CO2/ ton" Doesn't "sequester&qu ...

    CNC tooling
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- I was wondering if anyone has used any tooling from Rocky Mountain CNC Solutions in the p ...

    Re: CNC tooling
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- If it is Chinese it sort of a crap shoot. By tooling do you mean tool holders or bits? Se ...

    Re: Dowel laminated timber
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Um, I know this is OT, but can anyone tell me what F D M + C actually stands fo ...

    Re: Dowel laminated timber
    A message posted at WOODWEB's Business and Management Forum (6/17) -- I don't fully understand this, but my understanding is that trees are mostly ma ...

    Re: CNC for wood sculpting
    A message posted at WOODWEB's CNC Forum (6/17) -- If your looking for true 3d sculpting I'd think you'd be looking at an aggregate machine in the lea ...

    Re: Richlite Countertop
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/17) -- We've used it twice, as specified. Customers hated it. Had to replace ...

    Re: Library Bookcase with Swing Out Cabinet
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/17) -- I'd check with the local code people and get it in writing! It wouldn ...

    Re: Hiring
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/17) -- Like Nathan we do best through our employees. ...

    Re: Commercial construction methods
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Scott, that is normal practice. ...

    Biesse vs Holzher vs Time Saver
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- We’re currently looking into buying an edge bander and a 43” dual belt sander. Beyond the ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- Wow, a blast from the past. I wouldn't have thought I'd ever see another response on this thread. A ...

    Re: Microvellum vs. Wood Cad Cam or bCabinet
    A message posted at WOODWEB's CAD Forum (6/17) -- Ive used Microvellum for a long time, its really expensive 22k to 40k depending on all the options. ...

    Re: The "Sharing" economy and custom cabinet shops.
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Kim, I think my post was politically neutral. It neither advocates for governme ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- He had previous experience with Solid Works when I hired him, and was adept with the program. I thi ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- With Smartlister the changes are much easier than it would be otherwise in Auto Cad. I was wonderin ...

    Cleaning glue off stave door cores
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- My guys in the shop have been cleaning dried glue from stave door cores for o ...

    Re: Setting 5/16 biy for cnc
    A message posted at WOODWEB's CNC Forum (6/17) -- Bob, All great responses above. I would definitely recommend getting comfortable with chip load Ex ...

    Re: Yellow glue vs White glue
    A message posted at WOODWEB's Adhesives Forum (6/17) -- I hate that stuff. It drys flexible and when you sand it with the RO it gets gummy and clogs ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- I'm sure SW has come a long way since I last used it. But for me getting parts out trumps the rest. ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- Thanks Jason. I'm using Topsolid Design 2013 6.14 and haven't had much of a crashing issue like you ...

    White Glue
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Looking for a suggestions for a white glue with similar characteristics/strength as yello ...

    Re: Pantry Pull-out
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Chipbored's method sounds like a tall drawer bank with a single face. I've never tried it ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- I suspect he's using local parametrics but I'm not sure. Keep in mind that the parametics that he i ...

    Re: The "Sharing" economy and custom cabinet shops.
    A message posted at WOODWEB's Business and Management Forum (6/17) -- In my 40 years I have done work for all kinds of people from all economic backg ...

    Re: The "Sharing" economy and custom cabinet shops.
    A message posted at WOODWEB's Business and Management Forum (6/17) -- The more things change the more they stay the same. Maybe rich guys will want s ...

    Re: White Glue
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- This subject has been hammered to death many times. Search the knowledge base. The yellow ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- On a related note, when I ask him to make changes to a drawing it might take minutes. When I asked ...

    Re: Pantry Pull-out
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- In a highend inset beaded faceframe kitchen I took 6 or so dovetailed drawers and attache ...

    Re: Cleaning glue off stave door cores
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- In my past experience working for commercial door companies, we always used a ...

    Re: Tension rod for cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- A quick search turned up 7/16" tension curtain rod. Replace the rubber end caps with ...

    Biesse NC500 Software
    A message posted at WOODWEB's CNC Forum (6/17) -- Hello All, I am looking for the Biesse NC500 control software to install on my computer at home so ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- The software is TS Wood 6.14, I believe that the current version is 6.16. The software vendor wants ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- That is interesting. Are you talking about global parametrics as with CV or local parametrics as wi ...

    Re: Cleaning glue off stave door cores
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- We will also put them through the molder using carbide heads, but often the m ...

    Re: Tension rod for cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Here is an idea... Glue one of the CLOSED versions of these onto each end... http://www.w ...

    Re: The "Sharing" economy and custom cabinet shops.
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Cuba is the place for you. Or maybe North Korea. There the government controls ...

    Re: To switch finish brands?
    A message posted at WOODWEB's Finishing Forum (6/17) -- also look into sayerlack. It is a sherwin williams company so it should be easy to get. perso ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- Just curious as that indicates the learning curve for your SW draftsman. Did have previous cabinet ...

    Re: Pantry Pull-out
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Is this what Chipbored is suggesting? The client liked this one so much, that 8 years lat ...

    Re: Cleaning glue off stave door cores
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- I glued up on the thick side and calibrated going through the moulder hitting ...

    Re: White Glue
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Titebond makes a white glue that's very similar to their yellow glue. Your supplier shoul ...

    Re: The "Sharing" economy and custom cabinet shops.
    A message posted at WOODWEB's Business and Management Forum (6/17) -- No worries Jim, there will continue to be opportunities for you. ...

    Re: Cleaning glue off stave door cores
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- We knock the big blobs off with a scraper then calibrate through the wide bel ...

    Re: Pantry Pull-out
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Chipbored- I would love to see a photo of your solution. What a simple and smart idea! ...

    Re: White Glue
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Shouldn't the yellow glue pop right off the white vinyl? Try "RooClear" Glue ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- Pat, I feel like it has to be from 2 years ago, but I might be mistaken ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- Jason, Can I ask what version of Topsolid Wood you are using? ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- Thanks Derek That is impressive. Machine code still from CV? ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- He can make global door style changes, I know that much. ...

    Re: Inventor for Casework
    A message posted at WOODWEB's CAD Forum (6/17) -- might look at widom & associates ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- What year was this thread from? ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- Yes. ...

    Re: Labor Market/Finding Workers
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Jerry, your quandary is a reflection of the economy past. Those who were over q ...

    3M PPS-H/O (high output)
    A message posted at WOODWEB's Finishing Forum (6/17) -- For years I have been using gravity guns equipped with the 3M PPS system. I love the ease of ...

    Re: Labor Market/Finding Workers
    A message posted at WOODWEB's Business and Management Forum (6/17) -- We can all lament the lack of appropriately qualified workers but more importan ...

    Re: Labor Market/Finding Workers
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Snagglpus and Jerry's original comment reflect our experience. We've gone throu ...

    Re: Labor Market/Finding Workers
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Comparing the construction wages with woodworkers wages is not comparing apples ...

    Re: Labor Market/Finding Workers
    A message posted at WOODWEB's Business and Management Forum (6/17) -- I can agree with Snagglepus's observations, but want to see the big time return ...

    Festool sanding pads
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Been having a lot of trouble getting any life out of the sanding pads on my 5" festo ...

    Re: Placing your cut on an upcut saw
    A message posted at WOODWEB's Solid Wood Machining Forum (6/17) -- We had the identical saw, concerns, and problem solving scenario. I gave up on the ...

    Re: Conestoga wood finish with AAA
    A message posted at WOODWEB's Finishing Forum (6/17) -- al, I think the reason why they don't recommend thinning is because you might take the finish ...

    Re: Legislature Gavel
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- I tried lots of woods but I like Amboyna Burl and ebony handles the best with ...

    Re: Giben edgebander
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- I own one. I've been a tech for twenty years and have repaired just about eve ...

    Any issues with this?
    A message posted at WOODWEB's Finishing Forum (6/17) -- I don't do much laminate work. A customer asked me to make a conference/lunch table for their ...

    Re: Legislature Gavel
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- I forgot the local exotics like Persimmon and Dogwood and Osage Orange. A lit ...

    Re: Alcohol dyes on top of Cv?
    A message posted at WOODWEB's Finishing Forum (6/17) -- if I was going to attempt to color shift CV , I would use a toner and then another coat of CV ...

    Re: m codes
    A message posted at WOODWEB's CNC Forum (6/17) -- Richard, An M244 macro on a Thermwood 3 axis machine (such as a CS45) is related to tool changes - ...

    Re: Water based finish on ranger board MDF
    A message posted at WOODWEB's Finishing Forum (6/17) -- Here is what 1/4" ranger looks like and what it looks like after 2-3 coats with scuff sa ...

    Re: m codes
    A message posted at WOODWEB's CNC Forum (6/17) -- Think it is a user defined one. USER DEFINED M-CODES Details: If any M-code is used which is not in ...

    Re: anyone ever charred wood for perseving aka Shou sugi ban
    A message posted at WOODWEB's Sawing and Drying Forum (6/17) -- In the western U.S., surveyors used charred wood from a species that does not grow in ...

    Re: Choosing Air Compressor
    A message posted at WOODWEB's WOODnetWORK Forum (6/17) -- Chris, I second what Andrew said, you need at least a 10 HP compressor for what you are run ...

    Re: Labor Market/Finding Workers
    A message posted at WOODWEB's Business and Management Forum (6/17) -- I should say I have had 2 or 3 really qualified applicants, however their wage ...

    Re: Internet marketing, prosumerism and paid bloggers.
    A message posted at WOODWEB's Business and Management Forum (6/17) -- This is much like the people that want a "ball park price." Or one of ...

    Re: Water based finish on ranger board MDF
    A message posted at WOODWEB's Finishing Forum (6/17) -- Brian, Thanks, I am comforted by that and that's why I seek feedback from you guys because I ...

    taking 2x6x16' to 5/4" x 6 decking on moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (6/17) -- Guys, Any idea for knife marks per inch for running 5/4" premium decking out ...

    Re: Legislature Gavel
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- I so have the state seal and may engrave it in ,,(we have done this for the F ...

    Re: Festool sanding pads
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- I have two 5" ETS and one 5" Rotex that get used daily in the shop - about 4 yr ...

    from sample to cad
    A message posted at WOODWEB's CAD Forum (6/17) -- Hello all, I have someone that wants me to cut some complex pieces on my CNC and I am trying to fig ...

    Re: Water based finish on ranger board MDF
    A message posted at WOODWEB's Finishing Forum (6/17) -- I have the exactly the same issue with waterborne on Medex. I only use Medex so do not have e ...

    anyone ever charred wood for perseving aka Shou sugi ban
    A message posted at WOODWEB's Sawing and Drying Forum (6/17) -- seems pretty easy to do with dried wood lots of debate on web about if it works or no ...

    Re: kuper FW1150 stitching veneer trouble
    A message posted at WOODWEB's Veneer Forum (6/17) -- our machine is a direct heated tube. the machine seller advised us to use the kupper thread 1220 ...

    Re: Legislature Gavel
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- If you can get a piece of Persimmon that contains quite a bit of the black he ...

    Re: Labor Market/Finding Workers
    A message posted at WOODWEB's Business and Management Forum (6/17) -- I think it boils down to pay and benefits. Cabinetmaking pays what $20 at the m ...

    thoughts about choosing a cad program
    A message posted at WOODWEB's CAD Forum (6/17) -- we just got a multi cam cnc and we are now looking for a program that will be easy to learn and use ...

    Re: Labor Market/Finding Workers
    A message posted at WOODWEB's Business and Management Forum (6/17) -- I always find comparing wages on a $ per hour basis as a not very accurate meth ...

    Re: Drawing Software
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- Turbocad used to be the go. It did everything that Autocad did except for the ...

    Re: 4x24 PC belt sander
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- I think it's a heat issue, the metal plate gets hot and starts to wrinkle a bit. I switch ...

    Re: Water based finish on ranger board MDF
    A message posted at WOODWEB's Finishing Forum (6/17) -- We spray roughly 20 gallons of chem craft water based primer over ranger board every week. I ...

    Re: Choosing Air Compressor
    A message posted at WOODWEB's WOODnetWORK Forum (6/17) -- If you can find one/afford a new one, look into a screw style compressor. We bought one and ...

    Re: What software to use?
    A message posted at WOODWEB's CAD Forum (6/17) -- Jack, I work for KCD Software. KCD Commander produces nested G-code for your CNC router, and can be ...

    Re: Legislature Gavel
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- I think Bubinga would make a great gavel too. It holds up well for shop malle ...

    how do you get the pink out of alder
    A message posted at WOODWEB's Finishing Forum (6/17) -- I am putting a grey stain over alder wood.It casts a pink tint.We have put a medium stain on ...

    Re: Legislature Gavel
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- You can order them by the truck load from china and let the legislature fight ...

    Re: Labor Market/Finding Workers
    A message posted at WOODWEB's Business and Management Forum (6/17) -- all the freebees from the government food stamps housing and other assistance p ...

    Re: New spray system
    A message posted at WOODWEB's Finishing Forum (6/17) -- Kremlin I have three Kremlin systems.I want spray anything else. Great finish.I have three sa ...

    Re: Choosing Air Compressor
    A message posted at WOODWEB's WOODnetWORK Forum (6/17) -- Buy a Quincy Qt 10 . I would never buy any other brand air compressor. We have 2 25hp compr ...

    Re: how do you get the pink out of alder
    A message posted at WOODWEB's Finishing Forum (6/17) -- i usually dye it with green , or add green to the stain, or sometimes both. ...

    Re: Labor Market/Finding Workers
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Larry is right. I was referring to the NE ...

    Re: m codes
    A message posted at WOODWEB's CNC Forum (6/17) -- that would make sense thanks for the help greatly appreciated ...

    Re: how do you get the pink out of alder
    A message posted at WOODWEB's Finishing Forum (6/17) -- Max has it right. ...

    Re: M.L. Campbell Krystal Conversion
    A message posted at WOODWEB's Finishing Forum (6/17) -- 20% flow inhancer 2 ...

    Re: Festool sanding pads
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- We sand both surfaces ...

    Re: OH CRUD!
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- Since others don't seem to have a consistent problem; my thought is to determ ...

    Bonding Sheet Metal to Baltic Birch
    A message posted at WOODWEB's Adhesives Forum (6/17) -- I've got to laminate 24 gauge sheet steel to baltic birch for a pair of Thermador refrigerato ...

    Re: Drying slab locust from a stump
    A message posted at WOODWEB's Sawing and Drying Forum (6/17) -- Joe When I look at your post "Drying slab locust from a stump" from 6/10 MY ...

    Re: Roll up storefront garage door
    A message posted at WOODWEB's Architectural Woodworking Forum (6/17) -- In addition to what David said, I would also be concerned about the sag in th ...

    Re: Dust collector noise at jointer
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/17) -- I have a porter 16" jointer with the same problem. We open t ...

    Re: modern furniture
    A message posted at WOODWEB's Furniture Making Forum (6/17) -- Nice examples of modern furniture. Many people like to have wooden furniture as it loo ...

    Re: Dust collector noise at jointer
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/17) -- Yup, dust collection will generally increase the noise level of j ...

    Re: Keeping Butcher Block Style Tops FLAT & SMOOTH Over Time??
    A message posted at WOODWEB's Furniture Making Forum (6/17) -- Pro-Bond is a brand name for ppr - powdered plastic resin. The folks at Custom-pak use ...

    Re: Bagging and Selling Sawdust
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/17) -- I sell all my "shavings" to folks that have animals. I ...

    Re: Spalted sycamore
    A message posted at WOODWEB's Furniture Making Forum (6/17) -- Thank you all for your contributions to this topic. We have decided to withdraw all sp ...

    Re: FSV + Pinch roll veneer process?
    A message posted at WOODWEB's Veneer Forum (6/17) -- This won't work because you will not get enough pressure for a long enough time to get a good bo ...

    carbide inserts for a planer
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/17) -- Hi, I'm wondering if someone can help me not spend 900 $ on carbide i ...

    Re: Spalted sycamore
    A message posted at WOODWEB's Furniture Making Forum (6/17) -- using spalted wood without drying is asking for big trouble. The live virus in the woo ...

    Re: carbide inserts for a planer
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/17) -- Michel, We can help you with that. Our list price is lower. You can g ...

    Re: Rubbing out a lacquer finish
    A message posted at WOODWEB's Finishing Forum (5/17/25) -- Your mistake is using the 2F pumice which in use, (as compared to or with 600 grit w/d san ...

    Vertical router
    A message posted at WOODWEB's CNC Forum (5/17/25) -- Are any of the vertical routers that either Biesse, Homag, or Holz-Her make capable of machining ...

    Re: Rubbing out a lacquer finish
    A message posted at WOODWEB's Finishing Forum (5/17/25) -- Possible that the lower grits weren't sanded out enough to remove the scratches. If that's ...

    Re: Old masters penetrating sealer
    A message posted at WOODWEB's Finishing Forum (5/17/25) -- Here's a link that says it's in stock. Maybe get a couple gallons or more to hold yourself ...

    Re: Old masters penetrating sealer
    A message posted at WOODWEB's Finishing Forum (5/17/25) -- Thanks. I am buying why I can find but need a replacement when this runs out. ...

    Re: Omal Insert 1300
    A message posted at WOODWEB's Cabinetmaking Forum (5/17/24) -- Cassie, the battery is a possibility they should be changed about every 5 yrs. But as ...

    Re: rift cut oak
    A message posted at WOODWEB's Cabinetmaking Forum (5/17/24) -- We are getting a ton of orders for riftsawn white oak over the past year. We have a fe ...

    Re: holzher cnc machine vs biesse
    A message posted at WOODWEB's CNC Forum (5/17/24) -- We have been running Biesse routers for 11 years and love them. We had a Weeke prior to that wit ...

    Re: Automatic Tool Change Alternative System
    A message posted at WOODWEB's CNC Forum (5/17/24) -- Well here it is up and running in its final location of the high end of the X-axis. I just compl ...

    Garage Carriage Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17/24) -- Anyone have any advice on the best ways to insulate a garage carriage door ...

    Re: Which is the best woodworking software program?
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17/24) -- Angy - I believe the question was about which is the best. The OP, as well ...

    Re: Which is the best woodworking software program?
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17/24) -- There are numerous leading woodworking software programs, such as SolidWor ...

    Re: rift cut oak
    A message posted at WOODWEB's Cabinetmaking Forum (5/17/24) -- Ryan- thanks for your response. That sounds like what I'm going for. Care to share you ...

    Proper terminology...builder or assembler?
    A message posted at WOODWEB's Business and Management Forum (5/17/23) -- There was an argument recently between a relatively new shop employee and th ...

    Re: cnc router purchase
    A message posted at WOODWEB's CNC Forum (5/17/23) -- I have no experience running a heavy cnc such as the SCM but I can tell you that there is no way ...

    Re: cnc router purchase
    A message posted at WOODWEB's CNC Forum (5/17/23) -- I don't think either is a great choice. The SCM is probably a heavy iron machine with a lot of u ...

    Re: Wide belt sanding life
    A message posted at WOODWEB's Cabinetmaking Forum (5/17/23) -- There is a cleaner made for cleaning resin from sanding belts, it is called ABC abrasi ...

    Re: cnc router purchase
    A message posted at WOODWEB's CNC Forum (5/17/23) -- How much will speed matter to your shop? Do you have the orders, the workers, the bander and ass ...

    Bommer gate hinges
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17/23) -- We used and really like the Bommer 7112 gate hinges for swinging gates in ...

    Re: cnc router purchase
    A message posted at WOODWEB's CNC Forum (5/17/23) -- What are you planning to do with it? I disagree with BH Davis - I love old heavy iron. If you lo ...

    Re: Proper terminology...builder or assembler?
    A message posted at WOODWEB's Business and Management Forum (5/17/23) -- My point of view, does she assemble parts only or help figure out what is ge ...

    Re: Proper terminology...builder or assembler?
    A message posted at WOODWEB's Business and Management Forum (5/17/23) -- I would say "She" is a cabinet assembler / builder, but in my old ...

    Re: sharpening moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17/23) -- Are you using a scope to inspect your knives? I have found you can actually see ...

    Re: cnc router purchase
    A message posted at WOODWEB's CNC Forum (5/17/23) -- cutting cabinet parts, yes we have a bander that can keep up . all the lagunas all the videos i ...

    Equipment selection on dry kiln for wood
    A message posted at WOODWEB's Sawing and Drying Forum (5/17/22) -- This question is for either Professor Wengardt or others that have expert advice r ...

    Re: Aftermarket safety mats?
    A message posted at WOODWEB's CNC Forum (5/17/22) -- It would seem that the safety mats are simply normally open switches that close under the weight ...

    Re: Solid wood nesting tooling
    A message posted at WOODWEB's CNC Forum (5/17/22) -- Dropout I think Acctek is responding to my suggestion of using brazed carbide straight flutes as ...

    Ironwood / Cantek Wide Belt Sander
    A message posted at WOODWEB's Cabinetmaking Forum (5/17/22) -- We are looking into purchasing a new 2 head 43" wide belt sander. Does anyone hav ...

    Re: Equipment selection on dry kiln for wood
    A message posted at WOODWEB's Sawing and Drying Forum (5/17/22) -- I don't see any plans for sterilizing the wood. You'll have to bring the kiln up t ...

    Re: NwtDXF & Deepnest
    A message posted at WOODWEB's CAD Forum (5/17/22) -- Ugg. Forgot about the editing here. Oh well, old eyes and a cell phone. The subject line of this ...

    Sorry, reread and I had skimmed over that section on sterilizing.
    A message posted at WOODWEB's Sawing and Drying Forum (5/17/22) -- Just make sure your heat source meets the temps I mentioned, ...

    Re: Solid wood nesting tooling
    A message posted at WOODWEB's CNC Forum (5/17/22) -- If so, my apologies to Acctek. ...

    NwtDXF & Deepnest
    A message posted at WOODWEB's CAD Forum (5/17/22) -- Any others anyone wants to mention? ...

    Waterbase exterior paint system for sapele doors/windows in the Caribbean
    A message posted at WOODWEB's Finishing Forum (5/17) -- I'm looking for a waterbase paint system for brand new exterior doors and window units: 1. ma ...

    Re: Black Banding
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- No idea on the two pots as we have a cartridge bander and I keep black on hand always as ...

    Re: Glueing formica to old formica situation
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I get that, I have a solution once I come up with the correct adhesive. I found so far th ...

    Re: VFD for 5hp motor
    A message posted at WOODWEB's Furniture Making Forum (5/17) -- Hey...I had a client who builds control systems for the industrial food industry (furn ...

    Re: Refinishing
    A message posted at WOODWEB's Finishing Forum (5/17) -- First off, your display cupboard is 1950-1960's. Nitrocellulose was the finish of most manufa ...

    Re: RE: Table Making-- Best Method
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- David, I've heard of VERY few places that DON'T have a MC/RH change from season to se ...

    Black Banding
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I have an SCM Olimpic bander. We have a recurring job (almost 25% of our total banding) t ...

    Re: Glueing formica to old formica situation
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I've been down that road before .I did the bow of the boat all the side panels and ceilin ...

    Kremlin 10-14 vs. "?"
    A message posted at WOODWEB's Finishing Forum (5/17) -- Been running my 10-14 for the past 20 years. Second pump, third gun. Looking into a like and ...

    Re: Glueing formica to old formica situation
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Even if you fit it perfect and get glued to the old surface it is only stuck as well as t ...

    Re: Line boring or CNC boring
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- CNC router machine is a CNC tool that can create objects from wood. They are widely used ...

    Re: Kremlin AAA pump stalling, stammering.
    A message posted at WOODWEB's Finishing Forum (5/17) -- Most of the time that my 10-14 goes south there is a blockage in the whip line or in the flui ...

    Re: Conturo
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- The square bearing (if you can find one with the rad you need) eliminates the need for ta ...

    RE: Best Chainsaw for Ripping Logs
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- What is the best chainsaw for ripping hardwood logs such as red oak, white oak, maple ...

    Re: Glueing formica to old formica situation
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Doesn’t wilsonart have a line that is made for this? I think it’s called re-cover, and is ...

    Re: Glueing formica to old formica situation
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Gary: I have used that before, it does nor permit time for positioning which I would need ...

    Re: Kremlin airmix problem
    A message posted at WOODWEB's Finishing Forum (5/17) -- are you mixing the product in the stainless bucket? looks like scratches on the wall. what ar ...

    Re: RE: Best Chainsaw for Ripping Logs
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- What's a dollar amount that you consider inexpensive? ...

    Re: Conturo
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Scott, Mark and cabinetmaker, thanks for the responses. ...

    Re: Black Banding
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Gotta love the HolzHer cartridge system. ...

    Re: Recommendations on Hardwax oil finish on Millwork, Furniture and cabine
    A message posted at WOODWEB's Finishing Forum (5/17) -- To Chuckles, I mean Rich C, I'm glad I could make you laugh. It's good to laugh a little in h ...

    another wiping stain spraying thread
    A message posted at WOODWEB's Finishing Forum (5/17) -- Hello Right now my routine is : - sprayed dye stain - brush/rag applied wipping stain Now sin ...

    Edgebanding: Match the doors or match the interior?
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Question for the cabinetmakers here that build frameless cabinets. What do you do for edg ...

    Re: Recommendations on Hardwax oil finish on Millwork, Furniture and cabine
    A message posted at WOODWEB's Finishing Forum (5/17) -- Hi Scott! I get very interested to learn more about that you comment, the uv oil... I have fe ...

    Re: Edgebanding: Match the doors or match the interior?
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I work mostly with solid wood, and don't build a lot of cabinets. So I am asking a logica ...

    Re: Edgebanding: Match the doors or match the interior?
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Everyone around me does prefinished maple plywood with prefinish maple banding. To me, it ...

    Monthly CMA membership
    A message posted at WOODWEB's Business and Management Forum (5/17) -- Now is a great time to join the Cabinet Makers Association as monthly membershi ...

    Mounting Wall Paneling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/17) -- I have used Z clips and Star anchors for mounting 3/4" thick wal ...

    Re: Edgebanding: Match the doors or match the interior?
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- When did what was easiest become the deciding factor of what we do and how we build cabin ...

    Re: Mounting Wall Paneling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/17) -- It looks like, after reading through the AWI standards, that wall pan ...

    Re: Edgebanding: Match the doors or match the interior?
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I match the door because that's they way it should be. You can always prefinish your edge ...

    Re: Assembling Face Frames
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- The decorative keys come as long strips that you cut as needed. Assuming your frames are ...

    Re: Shaper cutter for face frame material
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Climb cutting works well but you must be extra careful in your setup. Wax the table & ...

    Glass rail system
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- I have an open stairway to build with my treads houses into the stringers. Th ...

    Glue choice
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- I have a round window frame a built from poplar staves. I need to laminate th ...

    Re: Need advice on bits
    A message posted at WOODWEB's CNC Forum (5/17) -- Here is a picture of all my bits feeds and speed and speeds. On 3/8" bits, I do one pass plus ...

    Re: Grizzly 18-36 Drum SDander
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Thanks for your response. Do you have a preference on the belt manufacture?. Yes I ...

    Re: Shaper cutter for face frame material
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I bought a new Weinig 5 head quite a long while back. Nice machine but I wish I had bough ...

    Re: Need advice on bits
    A message posted at WOODWEB's CNC Forum (5/17) -- RPM? Depth of cut? Climb or conventional? I ran several hundred sheets of 5/8 of this stuff last ye ...

    Re: Shaper cutter for face frame material
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- My fence from them is aluminum center and the delron on the edge no flex. We have not had ...

    Re: Grizzly 18-36 Drum SDander
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- So do you really have a drum sander, or do you have a belt sander? Why would you n ...

    Re: Kitchen and bathroom cabinet/ vanity finishs
    A message posted at WOODWEB's Finishing Forum (5/17) -- Thanks for the discussion. Actually, I think you have good knowledge about to make the kitche ...

    Re: Wide belt sander drum repair
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Curious how the drum turned out. There is a huge difference in a shop that does ro ...

    Re: Glue choice
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- So this will see no exterior exposure at all? Poplar has about zero rot resis ...

    Re: gluing Boards for shiplap
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- I like BHD's solution. It takes care for the movement problem. ...

    Re: Anyone know the name of this machine?
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I have a Hoffman ...

    Re: threaded shank brad point bits
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- usroutertools.com ...

    Re: 8/4 Cherry Top moisture content?
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- The outside RH in western N.Y. averages 70% RH in the summertime. It is below this du ...

    Re: Mold prevention on Eastern Red Cedar
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- Mold fungi on wood need moisture, air, warm temperatures over 50 F, and food to be ac ...

    busellato jet 3006 won't reset
    A message posted at WOODWEB's CNC Forum (5/17) -- jet 3006 had things running making some test panels everything seamed normal loaded the panel appli ...

    Re: Butfering Planer/Sander Eating Belts
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Just wanted to give an update. I looks like the sensor eye had migrated to the dri ...

    Re: Shaper opinions
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I saw a video on YouTube of a guy with a Felder who made one for his machine and will be ...

    Re: Wood Topped Sink Cabinet
    A message posted at WOODWEB's Furniture Making Forum (5/17) -- Go old school with this. Use West System epoxy (#207 Hardener) and put a few coats on ...

    Re: qualspray AM- 2012PR
    A message posted at WOODWEB's Finishing Forum (5/17) -- Shane is right It is very much like the Asturo I have that Asturo Good gun, powerful It is ra ...

    Re: Project forms
    A message posted at WOODWEB's Business and Management Forum (5/17) -- We have a job sheet that we have used for years that can be linked to Tractivit ...

    Re: Shaper opinions
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I opted go with a “power drive” to raise and lower the spindle. It’s “supposed” to be acc ...

    Re: Enroute for SCM patrix s22
    A message posted at WOODWEB's CNC Forum (5/17) -- Enroute does a number of company sponsored tutorials a year. One is scheduled in Boston in June. Yo ...

    Re: Shaper opinions
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I installed a dial gauge, that I bought from Felder, in the elevation wheel of my Felder. ...

    Re: busellato jet 3006 won't reset
    A message posted at WOODWEB's CNC Forum (5/17) -- Thanks for the response, the safety mat has a short in it and needs to be replaced. ...

    Re: Enroute for SCM patrix s22
    A message posted at WOODWEB's CNC Forum (5/17) -- individual training https://www.youtube.com/channel/UC3vcs4pErP7m5XVXd4fFL5w ...

    Re: Enroute for SCM patrix s22
    A message posted at WOODWEB's CNC Forum (5/17) -- Full training https://www.youtube.com/watch?v 8T5Ze7lUbNc ...

    Re: busellato jet 3006 won't reset
    A message posted at WOODWEB's CNC Forum (5/17) -- Check all the safeties, switches, beams, trip wires. ...

    Re: Butfering Planer/Sander Eating Belts
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Thanks for reporting back. ...

    Re: 8/4 Cherry Top moisture content?
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- Tennessee Tim, thank you! ...

    Re: Shaper opinions
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- It will ...

    Re: Emails upon emails
    A message posted at WOODWEB's Business and Management Forum (5/17) -- I like e-mails, and try to steer all communications to that format. First, they ...

    Waterborne finish on a wetbar wood top
    A message posted at WOODWEB's Finishing Forum (5/17) -- Hi everyone. I have to make a Walnut countertop for a wet bar. I made a couple other tops For ...

    Re: Kem Aqua Plus
    A message posted at WOODWEB's Finishing Forum (5/17) -- Most of my experience is with MLC products. Their Agualente primer(and the Polystar before it ...

    Re: Holding deposit for upcoming work
    A message posted at WOODWEB's Business and Management Forum (5/17) -- Requiring deposits to eliminate or reduce risk is a policy decision. Needing de ...

    Re: Holding deposit for upcoming work
    A message posted at WOODWEB's Business and Management Forum (5/17) -- Thanks for the in depth responses. So many great points are made. this stood ou ...

    Re: Kem Aqua Plus
    A message posted at WOODWEB's Finishing Forum (5/17) -- Thanks again for all the info. I do think I may go to maybe 180 for my final sand of the bare ...

    Re: How to affix end panels to prefinished plywood
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I like Matt's idea of screwing through the line boring holes. We screw all our finished p ...

    Re: Holding deposit for upcoming work
    A message posted at WOODWEB's Business and Management Forum (5/17) -- This is a fairly simple one for me. I separate cabinet cost from installation. ...

    Re: Holding deposit for upcoming work
    A message posted at WOODWEB's Business and Management Forum (5/17) -- I know a lot of shops ask for a deposit before anything is started and some amo ...

    Biesseworks - Parametric
    A message posted at WOODWEB's CNC Forum (5/17) -- I was working on a program for a parametric Kitchen door and I can't get it to come out right. I di ...

    Biesseworks - Tool File
    A message posted at WOODWEB's CNC Forum (5/17) -- I loaded the biesseworks software in the office computer but I need to copy the tools that I have o ...

    Biesseworks - Parametric arks
    A message posted at WOODWEB's CNC Forum (5/17) -- I am trying to create some Kitchen doors in Parametric on Biesseworks, however I am having a few is ...

    Re: Biesseworks - Tool File
    A message posted at WOODWEB's CNC Forum (5/17) -- You need to use Biesseworks backup manager. Open backup manager, copy the information that you want ...

    Re: Festool laminate trimmer vs the rest
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I agree with the others, generally festool is a huge waste of money. the only festool stu ...

    Re: Biesseworks - Tool File
    A message posted at WOODWEB's CNC Forum (5/17) -- A few years back I just copied one file from the machine to the office. I was hoping to the same no ...

    Re: Kem Aqua Plus
    A message posted at WOODWEB's Finishing Forum (5/17) -- A question for those who use the WB primer and the BIN white alcohol primer. Do you get more ...

    False Front Clips
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Has anyone seen or used this type of false front clip? Trying to find who makes this part ...

    Flexicam
    A message posted at WOODWEB's CNC Forum (5/17) -- I have 2 Flexicam machines one runs great. am getting a spindle fault on the other. I changed the p ...

    Re: Biesseworks - Parametric arks
    A message posted at WOODWEB's CNC Forum (5/17) -- Call Biesse direct, they do free phone support. They should be able to help you with all of this no ...

    Re: Biesseworks - Parametric arks
    A message posted at WOODWEB's CNC Forum (5/17) -- There should be a utility to reverse the direction of the line. You can also do this in Auto Cad, g ...

    Re: False Front Clips
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Great, thanks for the help! I just wasn't using the right search term when on their websi ...

    Re: Dovetail Machines....
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Check out the Dodds, I've been happy for years with it ...

    Re: Biesseworks - Parametric arks
    A message posted at WOODWEB's CNC Forum (5/17) -- I tried that it didn't work. ...

    Re: False Front Clips
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Hafele....260.15.300 ...

    Re: Biesseworks - Tool File
    A message posted at WOODWEB's CNC Forum (5/17) -- Typically \WNC\Home\d_xnc\dati ? ...

    Re: clogging tips in Kremlin guns
    A message posted at WOODWEB's Finishing Forum (5/17) -- Sounds like a s.o.p. problem. If you want your equipment to run properly I suggest starting n ...

    Re: Last bottom knife - really necessary?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- "We hand-plane and sand the face anyway" In that (or similar) case only, ...

    Re: What CNC Nesting Software is everyone running?
    A message posted at WOODWEB's CAD Forum (5/17) -- Keith, You mentioned you're running Microvellum now and you're having some trouble. I can understan ...

    What CNC Nesting Software is everyone running?
    A message posted at WOODWEB's CAD Forum (5/17) -- We are currently running Microvellum for all of our standard box (Melamine Cabinets) construction p ...

    Re: Solid Wood Casket Difficulties
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- I'm sure there are many similar options available in 50hz. As to single phase, as ...

    ML Cambell
    A message posted at WOODWEB's Finishing Forum (5/17) -- Hi all, can anyone give there thoughts on ML's waterbased finishing system..Agualente?? I hav ...

    clogging tips in Kremlin guns
    A message posted at WOODWEB's Finishing Forum (5/17) -- We have a Kremlin airmix gun and pump. We love it and it has given us years of good service, ...

    Air Dryer
    A message posted at WOODWEB's CNC Forum (5/17) -- New 4x8 CNC on the way. CNC calls for 5CFM of 100PSI "Dry, oil free" air. We are installi ...

    Re: clogging tips in Kremlin guns
    A message posted at WOODWEB's Finishing Forum (5/17) -- What I hear is you keep the finish in the gun all the time and the only time you clean it is ...

    Re: Agualente Plus primer
    A message posted at WOODWEB's Finishing Forum (5/17) -- To everyone else who contributed and may be wondering, IT was the tip size. A 1.2 orifice or ...

    Pulling the trigger on a AAA rig
    A message posted at WOODWEB's Finishing Forum (5/17) -- Noted that this is probably just my hesitance to wright the check. But, I've narrowed my sear ...

    Kcd Question
    A message posted at WOODWEB's CAD Forum (5/17) -- i recently upgraded the the cnc commander of the program. I was instructed to save all the closets ...

    Re: Glue Line
    A message posted at WOODWEB's Adhesives Forum (5/17) -- I am using powder type (old-fashion) adhesive, mixed with water, and some industrial chemical ...

    Re: Agualente Plus primer
    A message posted at WOODWEB's Finishing Forum (5/17) -- From what I read on Chemcraft website that waterborne primer can be top coated with clear sol ...

    Re: Bob Buckley Altendorf Tune Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Tim, Beggars can't be choosers, besides I got it to you four days ago and the tune-up sho ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/17) -- Plane those walnut, and leave it for weeks to dry, with lots of ventilation. Stack them if yo ...

    Re: Bob Buckley Altendorf Tune Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Mark, I am a CMA member. It's a very localized chapter. I am currently CEO and President. ...

    Re: Glue Line
    A message posted at WOODWEB's Adhesives Forum (5/17) -- The "old fashioned" powder glue contains formaldehyde. Most shops should avoid this ...

    Re: Bob Buckley Altendorf Tune Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Some attribution is in order. When a newspaper reporter asked Nelson Rockefeller how many ...

    Re: Cutting Plastic Laminate
    A message posted at WOODWEB's CNC Forum (5/17) -- Hello i am still a beginner in the cnc world and i work i own a carpentry if i may ask you how do y ...

    Re: Old Planer machine shooting "bullets"
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- I need to hammer the top cover every 30 minutes.. According to my teacher, it is b ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/17) -- Wood does not expand a practical amount when it is heated. In fact, what does happen is that ...

    Re: Cutting Plastic Laminate
    A message posted at WOODWEB's CNC Forum (5/17) -- Your tooling manufacter should have some recommendations. The idea is to take enough material to ke ...

    Re: Agualente Plus primer
    A message posted at WOODWEB's Finishing Forum (5/17) -- By slow down I mean the velocity of the spray. The chemcraft can be coated with anything. Acc ...

    Re: Agualente Plus primer
    A message posted at WOODWEB's Finishing Forum (5/17) -- Jonathan, When you say "slow the material down by quite a bit" do you mean you were ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/17) -- I am sure your glued wood will not work after a few weeks if you are not using poly glue. Don ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Adhesives Forum (5/17) -- You do not need to alternate the strips. The amount of cup is so very small that this orienta ...

    Re: Bob Buckley Altendorf Tune Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I guess Nelson was saying that half of the work force worked for him? That is an exclusiv ...

    Re: Bob Buckley Altendorf Tune Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- That's the one Ranliker! You're a way better photographer than Mark. ...

    Fein R.O. sander rebuild ?
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I'm looking for a recommendation of some one to rebuild a Fein RO sander. Thanks ...

    Re: Bob Buckley Altendorf Tune Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- That sounds like a very exclusive group, how many members? ...

    Re: Solid Wood Casket Difficulties
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- I need Single phrase 240 volt, 50Hz UK Electric machine ;) ...

    Re: Bob Buckley Altendorf Tune Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Then Mark is a poor photographer. Pitty the fellow. ...

    Re: Agualente Plus primer
    A message posted at WOODWEB's Finishing Forum (5/17) -- al, I was told by my rep that you could topcoat it with anything. Mark ...

    Re: Router Bit Supplier Problem
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- 15/32 11.9mm Buy a 12mm from most router bit companies. ...

    Re: Bob Buckley Altendorf Tune Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- From my files. Not sure it's the intended target. ...

    Re: AAA pumps electric or pneumatic
    A message posted at WOODWEB's Finishing Forum (5/17) -- Anyone no experience with aaa guns likes or problems? ...

    Re: Old Planer machine shooting "bullets"
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- That's a good question. ...

    Re: Bob Buckley Altendorf Tune Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I think today it's about 99%. ...

    Re: Old Planer machine shooting "bullets"
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Got a video? ...

    Re: Bob Buckley Altendorf Tune Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- About half. ...

    Re: Bob Buckley Altendorf Tune Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- ? ...

    Compressor keeps going off and having trouble locating leak
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Here's pics of my set up i have an air dryer attached and i have a shut off valve at the ...

    Re: Using clear lacquer for pigmented aqualente
    A message posted at WOODWEB's Finishing Forum (5/17) -- Oh, as far as choosing a clear or white base to mix a color simply comes down to what the com ...

    Re: Using clear lacquer for pigmented aqualente
    A message posted at WOODWEB's Finishing Forum (5/17) -- Sean, Thanks for the response. And that makes sense. I am just having a problem with coverage ...

    Re: Using clear lacquer for pigmented aqualente
    A message posted at WOODWEB's Finishing Forum (5/17) -- Alex, are you priming the wood first? You should lay down a coat of primer before spraying yo ...

    Vicious circle with some vintage iron
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I scored a deal on an old manual Black Bros case clamp, tried to clean it up, & now i ...

    Re: Using clear lacquer for pigmented aqualente
    A message posted at WOODWEB's Finishing Forum (5/17) -- I use aqualente primer sealer and block out that coat to a smooth surface, it will leave some ...

    Re: Double head board to for Queen size bed
    A message posted at WOODWEB's Furniture Making Forum (5/17) -- You are also going to have to extend the length. I did that once by adding a few inche ...

    Re: Onsite custom cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Back in the day, long before Festool was a household name, it was common in parts of the ...

    Re: Edgebanding HPL
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Another vote for PVA primmer. PVA wood glue, same thing some laminate guys use for " ...

    Re: Online Advertising
    A message posted at WOODWEB's Business and Management Forum (5/17) -- The Houzz people are saying that you pay, I don't know how much to get you at t ...

    Double head board to for Queen size bed
    A message posted at WOODWEB's Furniture Making Forum (5/17) -- I have been asked to make a double head board and foot board fit a queen size bed. The ...

    This might be of use to someone
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- Once in a blue moon I have to install counters like this. This idea worked out pretty goo ...

    Re: nested base vs beam saw
    A message posted at WOODWEB's CNC Forum (5/17) -- Larry please take alook at our cnc its look like normal chines cnc ,but its not we change all contr ...

    Re: Clawlock II primer problems
    A message posted at WOODWEB's Finishing Forum (5/17) -- no its been catalyzied exactly what it is supposed to be. Also its been doing this even when ...

    Re: Imos CAD CAM
    A message posted at WOODWEB's CAD Forum (5/17) -- Hi, I have used imos for 5 years now. It is a great cad based parametric program with many integrat ...

    Re: Clawlock II primer problems
    A message posted at WOODWEB's Finishing Forum (5/17) -- How about dry time? Do you let the primer dry thoroughly before sanding and topcoating? If th ...

    Re: Double head board to for Queen size bed
    A message posted at WOODWEB's Furniture Making Forum (5/17) -- Thanks for the response. When I get the bed into the workshop which will be sometime n ...

    Re: This might be of use to someone
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- thats a great idea i had to do that once or twice and it was a real struggle. I work by m ...

    Re: Optimisation program that exports to SCM Wincut
    A message posted at WOODWEB's CNC Forum (5/17) -- opticaut from bool very good optimizer ,many parameters can be adjust can mange the west ,and the s ...

    Re: Clawlock II primer problems
    A message posted at WOODWEB's Finishing Forum (5/17) -- Spraying heavy, hot humid temps and thinning with lacquer thinner? thin with butyl acetate in ...

    Re: Optimisation program that exports to SCM Wincut
    A message posted at WOODWEB's CNC Forum (5/17) -- the attach ...

    Re: nested base vs beam saw
    A message posted at WOODWEB's CNC Forum (5/17) -- the attach ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Edge glue verticals. Cut slot in top and bottom plus rails for a spline stopp ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Thanks Brian, I am really concerned that there is not enough holding this doo ...

    Re: Chipping/splitting on edge of casing, American beech
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Great information on this post,I would agree with the doctor on over dried wood. M ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Gluing the doors in the 4 corners is more then adequate. With splines of this ...

    Re: Cobalt blades coming soon
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- I'm not sure if they are doing anything different. I just never knew how they welded ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Got it. I'm kinda embarrassed that I actually said I could glue all of the pl ...

    Preventing warp in pedestal table tops
    A message posted at WOODWEB's Furniture Making Forum (5/17) -- Hi! I am making 30 walnut table tops to go on pedestal stands in a restaurant. The fin ...

    Re: Cobalt blades coming soon
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- Carbide is made of tungsten carbide with a cobalt binder. The amount of cobalt varies ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Yes that is exactly what I meant. Sapele will work well for the splines. We h ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Everyone one of those boards is going to expand in width, not length. Glue al ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- You could run the styles into the depth of the mortise. The main reason for n ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- We did a house full of this type door a few years ago. We used square edge co ...

    Re: Chipping/splitting on edge of casing, American beech
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Also I have one more question, are you using a custom pressure shoe on this profil ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- In using a solid sapele spline does grain direction matter considering the si ...

    Re: wide belt sanders
    A message posted at WOODWEB's WOODnetWORK Forum (5/17) -- What brand of sander is it? Most of the metal standing machines I have experience with only ...

    Re: Sanding Beech
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- Beech is not prone to checking, like oak is. So, with proper drying, you do not need ...

    Re: Cobalt blades coming soon
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- Stellite alloy is a range of cobalt-chromium alloys designed for wear resistance. It ...

    Radius stair landing
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- I need to build a radius stair landing per the attached drawing. It will be s ...

    Re: Avoiding Stain in Hickory
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- Forget about dipping as that is a fungicide and blue stain fungus is seldom an issue ...

    Re: Radius stair landing
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- The best tread would be the widest pc of stock you could find resawn and laid ...

    Re: wide belt sanders
    A message posted at WOODWEB's WOODnetWORK Forum (5/17) -- Thanks for all the responses. The brand is an AEM. Because of the price and probably the la ...

    Re: Preventing warp in pedestal table tops
    A message posted at WOODWEB's Furniture Making Forum (5/17) -- You can use due diligence to stop cup or twist... At this point it's up too the client ...

    Re: Radius stair landing
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- With a landing like this I would typically kerf the back side of a pc of soft ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Sorry, I can not figure out how to post a link in-line or edit my post. The l ...

    Re: Cobalt blades coming soon
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- What is the difference between cobalt and carbide? Carbide does have lots of cobalt. ...

    Re: Radius stair landing
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Mark, considering the cost of, hardwood we use plies of SPF (spruce/pine/fir) ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Thanks, Here's a drawing of what I think you meant. Is this right? The dark r ...

    Re: Radius stair landing
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- From the OP ... I'm asking about what would be the tread, not the riser. I'm ...

    Re: countertop help
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/17) -- Make the top in one piece itself and use a natural looking material for ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- I forgot to mention I would never use Ipe for anything like this. Its not an ...

    Re: Cobalt blades coming soon
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- And this is the blade they say is Cobalt rich, high-speed steel tooth tips. Doesn't s ...

    Re: Cobalt blades coming soon
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- They have a blade they say is carbide tipped. They cost about double the price of the ...

    Re: Radius stair landing
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Plywood for a tread surface would never be adequate...... ...

    Re: Cobalt blades coming soon
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- Gene,here is about all I could find ...

    Re: Cobalt blades coming soon
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- Here is what the blade looks like. ...

    Re: Radius stair landing
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Wow! Thats cool. Great job ...

    Re: Sanding Beech
    A message posted at WOODWEB's Sawing and Drying Forum (5/17) -- Thanks Gene,I didn't know that. ...

    Re: Cyclone rated volome
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/17) -- Thanks, guys. You've confirmed my suspicions and I really need to ...

    Re: Cyclone rated volome
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/17) -- The 7-1/2hp Torit is rated 1950 - 3500 cfm's at a static pressure ...

    Re: Cyclone rated volome
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/17) -- Mark, Please see PDF attachments. One is somewhat of an explanati ...

    Re: Cyclone rated volome
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/17) -- Price both types of ducting out....spiral and Norfab. Brand new t ...

    Interchangeable "quick fix" duct systems?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/17) -- I just saw photos of the quick fastening system of dust duct Tori ...

    Re: Cyclone rated volome
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/17) -- Double 36" sander is probably anywhere from 4ea x 4" po ...

    Pullout that latches into back of drawer face?
    A message posted at WOODWEB's Cabinetmaking Forum (4/17/25) -- I saw this at the KBIS show a few months ago. At the time, I thought I could easily fi ...

    Re: Crossroads
    A message posted at WOODWEB's Business and Management Forum (4/17/25) -- # 1 PAY YOURSELF A W-2 FOR 45 K... Even if you do not take a check pay the S ...

    Re: Gluepot cleaning / repair
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/17/25) -- If you only need it cleaned you can do that yourself. I have had to c ...

    Re: Commercial Millwork Deliveries
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/17/25) -- Opened many a semi to see this. Once I said to the group " Wh ...

    Re: Cut list optimizer with sequencing function
    A message posted at WOODWEB's CAD Forum (4/17/24) -- The question doesn't really make any sense to me Dan. The question seems out of the ordinary. Is ...

    Schelling FI 430. Memory card or battery?
    A message posted at WOODWEB's CNC Forum (4/17/24) -- Hi all. I am sorry for my English. I use Google translator. A frequency converter was repaired o ...

    Office help?
    A message posted at WOODWEB's Business and Management Forum (4/17/24) -- Hi guys I might not have worded my last post correctly. So I've been in busi ...

    Re: staining ceiling
    A message posted at WOODWEB's Finishing Forum (4/17/24) -- If you are just going a little bit darker I would suggest adding a small amount of pigment ...

    Maple Burl Veneer Table Tops
    A message posted at WOODWEB's Veneer Forum (4/17/24) -- Preparing to build tables as shown in photos. The tops are planned to be raw maple burl venee ...

    Re: Anyone Tried Sher-wood F3 Kemvar Formaldehyde Free Coating?
    A message posted at WOODWEB's Finishing Forum (4/17/24) -- Jon, The F3 is very comparable to the sherwood hi-bild precat as far as build and durabili ...

    Re: Which way to run the grain on tricky glue-up
    A message posted at WOODWEB's Furniture Making Forum (4/17/24) -- For good or bad the only way to make this out of solid wood is with the grain going ...

    Re: Schelling FI 430. Memory card or battery?
    A message posted at WOODWEB's CNC Forum (4/17/24) -- I really can't help with the specific machine but motherboards in general use a 2032 battery. Lo ...

    Re: Water cooled spindle in router table?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17/24) -- Pick up a Porter Cable 690 router. Either new or used. They basically last fore ...

    Re: Schelling FI 430. Memory card or battery?
    A message posted at WOODWEB's CNC Forum (4/17/24) -- Additional photos: ...

    Running curved stock on molder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17/23) -- So we have our molding machine running very well now good knives good feed rate ...

    Blum tip on drawer slides opening by themselves
    A message posted at WOODWEB's Cabinetmaking Forum (4/17/23) -- Just recently installed some cabinetry with large width drawer boxes (40"+/-) wit ...

    Re: What does your shop use for crosscutting face frame stock?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17/23) -- I have a CTD saw and biesemeyer fence and stop Very well built saw. Flip it on ...

    Re: Blind Stapler for Attaching Pre-Finished Face Frame to Cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (4/17/23) -- Senco Senclamp. I use one similar to it mad by BeA Fasteners. it has a beveled head so ...

    Re: Primer for cabinetry
    A message posted at WOODWEB's Cabinetmaking Forum (4/17/23) -- The bonding of paint to the cabinet might be hampered if the laminate is damaged, defo ...

    Re: Talk me down before I send this letter.
    A message posted at WOODWEB's Business and Management Forum (4/17/23) -- If I ever run into a similar situation, I try to take the path of least resi ...

    Primer for cabinetry
    A message posted at WOODWEB's Cabinetmaking Forum (4/17/23) -- Wanted to know more about laminate cabinets.. I am also interested in knowing the best ...

    Re: Blum tip on drawer slides opening by themselves
    A message posted at WOODWEB's Cabinetmaking Forum (4/17/23) -- Call your Blum Rep. Best source of information. ...

    Re: Wide rails (doors/shutters)... Forked tenon or ?
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17/23) -- I would love to see your work. ...

    Re: Primer for cabinetry
    A message posted at WOODWEB's Cabinetmaking Forum (4/17/23) -- Hi Vincent can you be more specific with your question? ...

    Re: Rotary Sawn Cherry Plywood Source
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17/23) -- You will not find rotary cut cherry. ...

    Re: Green logs for furniture
    A message posted at WOODWEB's Sawing and Drying Forum (4/17/22) -- I have a sawmill and deal mostly with sawn lumber and sticker it to dry. A few yea ...

    Re: Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (4/17/22) -- You asked a great question, but I don’t think you will get a lot of help as the spectr ...

    Re: Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (4/17/22) -- Service would be a huge factor That said, I've run a couple of glue pot machines and f ...

    Re: Unique 2700 CNC door machine used a a cope machine?
    A message posted at WOODWEB's CNC Forum (4/17/22) -- The PMK coper is a pretty slick unit. I've had mine in service for 3 months or so, wish I would' ...

    Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (4/17/22) -- Hi. I am looking at purchasing my first edgebander. I currently build mostly framed in ...

    Re: Looking for an advice on dowel cabinet construction methods
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- My current machinery is: 1.Sliding table saw: for cutting parts. 2.'Regular' Cabinet saw: ...

    Re: lacquer finish 6 months old is peeling and coming off
    A message posted at WOODWEB's Finishing Forum (4/17) -- The vinyl sealer has a top coat window. I’m thinking not only do you have a mil thickness as ...

    Re: Looking for an advice on dowel cabinet construction methods
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Lol. I never owned a table top cnc. Any who. Dado- Get a dedicated dado stack set up on o ...

    Re: Looking for an advice on dowel cabinet construction methods
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Chris, Cabinetmaker My cnc is very small one, working area is 30" x 40". I see ...

    Re: New residential shop
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Lean mfg will be your friend. With the white painted shaker craze in our area - I wouldn’ ...

    Re: Looking for an advice on dowel cabinet construction methods
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- with your cnc - go to a 5mm cutter- drill shelf holes and route stopped dadoes for the ba ...

    Re: Torrified Wood Opinions?
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- I serviced some molders at a company in Pa some years ago. I think maybe Bing ...

    Kolle Formatic table Schematics
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- We're looking for schematics for our Kolle Formatic sliding table saw. Blade raisi ...

    Re: factory layout
    A message posted at WOODWEB's Business and Management Forum (4/17) -- @ rich c: try using chrome. It will translate sites. The OP is in Tehran, Iran. ...

    Re: barn door hdw
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- I've been using US Futaba from HDL and have been happy with it. The only thing I don't li ...

    Removable Avery Labels 5366
    A message posted at WOODWEB's CAD Forum (4/17) -- This should be easy but I can’t find these with less adhesive. To allow removing them. ...

    Re: Setting alphacam for new machine
    A message posted at WOODWEB's CAD Forum (4/17) -- Maybe someone here can help, but we need better information. ...

    SCM Thundercut
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Is anyone using Thundercut? I have a couple questions ...

    Re: factory layout
    A message posted at WOODWEB's Business and Management Forum (4/17) -- reza Send me an email. ...

    5 axis for nesting
    A message posted at WOODWEB's CNC Forum (4/17) -- We are a busy commercial shop with a varied product line in search of a new CNC to replace our 15 y ...

    Re: Inset or Overlay
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- If you are doing modern farmhouse I would think Euro boxes with shaker doors. Inset with ...

    Re: CV over epoxy
    A message posted at WOODWEB's Finishing Forum (4/17) -- Because of the huge number combinations of epoxies and CVs, your best choice is to make a tes ...

    Re: Lazy Susan
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Have you tried offering a diagonal front corner susan? I refuse to do any type of pie cut ...

    Re: SBA Economic Injury Disaster Loans
    A message posted at WOODWEB's Business and Management Forum (4/17) -- Applied for the EIDL 3 weeks ago, and have not heard anything. Personal stimulu ...

    Re: hot air bander choices
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- I have a MiniMax ME-15 hot air bander that I've been running for over 15 years. I use .5 ...

    hot air bander choices
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- For those of you using a hot air edgebander, have any of you had success with preglued AB ...

    Re: CV over epoxy
    A message posted at WOODWEB's Finishing Forum (4/17) -- i bought epoxy that is made for a deep pour. up to 2 inches. I am pouring 1 1/2 inch. It is n ...

    Re: CV over epoxy
    A message posted at WOODWEB's Finishing Forum (4/17) -- Good luck with your first pour. I'm more familiar with small pours that woodturners do. I see ...

    Re: Blum Pocket Systems
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- We've always done the KV with the rack and pinion rod. Most of what we do is inset, and i ...

    CV over epoxy
    A message posted at WOODWEB's Finishing Forum (4/17) -- Hi I have my first live edge river table to build and have it in the form ready to pour on Mo ...

    Re: keeping your workforce safe
    A message posted at WOODWEB's Business and Management Forum (4/17) -- We are still considered essential in our area and have taken the steps mentione ...

    Re: Blum Pocket Systems
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Agreed Karl, I've done several with KV hardware. Not too jenky, but not too great either. ...

    Re: Mach3 Settup & support
    A message posted at WOODWEB's CNC Forum (4/17) -- i sugest you reaplace to mach 4 and change the card to pokeys,cost is very cheap ,and you get moder ...

    Re: Blum Pocket Systems
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- I don't know anything about that particular Blum hardware, but I'm glad you shared it. I ...

    Re: 5 axis for nesting
    A message posted at WOODWEB's CNC Forum (4/17) -- How much nesting for you do? I have had similar thoughts. We nest a lot of sheets per day. My insti ...

    Re: Diaphragm spray pump
    A message posted at WOODWEB's Finishing Forum (4/17) -- Thanks Nick. Doing some research I see Wagner makes one called Cobra which can be used with a ...

    Re: Lazy Susan
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Remind the clients that if anything falls off the susan it is next to impossible to retri ...

    Re: edge bander not turning on
    A message posted at WOODWEB's Business and Management Forum (4/17) -- Having trouble getting the tooling to reset "refrence point not ok and not ...

    Re: Lazy Susan
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Thanks again guys, I was able to sell her on using the open the door then access the susa ...

    Re: Sourcing Moldow dust bags
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/17) -- Try American Fabric Filter. ...

    Re: High feed rate, low ramp angle vs modest feed rate with increased angle
    A message posted at WOODWEB's CNC Forum (4/17) -- Ian, While your question is about ramp in rates I think there is a lot more here to consider. I ass ...

    Re: Deposits for spec home cabinetry
    A message posted at WOODWEB's Business and Management Forum (4/17) -- Harold, There are few reasons to require a deposit 1) You don't want any risk o ...

    Maintaining 1/8” gap on exterior t&g siding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- What type of tongue and groove mil specification and installation method woul ...

    small solvent pump gun
    A message posted at WOODWEB's Finishing Forum (4/17) -- I am using solvent base diaphragm pump and looking for a nice small gun that similar to touch ...

    Re: Cabinet hardware application help
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- What are you trying to accomplish with this design ? I think it’s suspect from the start. ...

    Re: Deposits for spec home cabinetry
    A message posted at WOODWEB's Business and Management Forum (4/17) -- He is not a con-tractor, these are great people with forward vision that are bu ...

    1986 Enco/Jet 15" Planer
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- I recently picked up a Enco (Interchangeable with Jet, parts-wise) 15" planer, an ...

    Re: High feed rate, low ramp angle vs modest feed rate with increased angle
    A message posted at WOODWEB's CNC Forum (4/17) -- If these are rectangular shapes program the lines rather than the parts and cut from the corner int ...

    Re: 5-piece Doors with Vertical Grain Rails
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- “When you come to a fork in the road, take it”. Jobs like this separate us into the group ...

    Re: Blown PC Nailers
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/17) -- Brad nailers,staplers, pinners should all be run 60-80 psi. Typically ...

    Re: Mold making
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- Pete: My question would be: What is the REAL labor and material cost differential betw ...

    Re: Deposits for spec home cabinetry
    A message posted at WOODWEB's Business and Management Forum (4/17) -- Alan F. Thanks for the great points. Straight facts without the suspicion and f ...

    Fabric Tack Panel
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- We have a small station on a project with a fabric back panel (over homosote in the spec' ...

    Re: High feed rate, low ramp angle vs modest feed rate with increased angle
    A message posted at WOODWEB's CNC Forum (4/17) -- Actually I'm referring to helical tool path. I first use a 3/4 rougher to size out the blanks. I'm ...

    Re: Blown PC Nailers
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/17) -- Both of them, 18 ga, were about 15 years old, and nothing lasts forev ...

    Re: Mold making
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- Thanks to all who responded in regard to making a mold. I have since talked with the c ...

    Re: Mold making
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- I would tell the client to pay you to carve it, or you can destroy the table for him a ...

    Re: Holz Her 1243 Sliding Table Saw
    A message posted at WOODWEB's WOODnetWORK Forum (4/17) -- It sounds like the electro magnet starter solenoid is not functioning. First thing to try i ...

    Re: Blown PC Nailers
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/17) -- Must be common to these models. We had two, vintage 2010, do the same ...

    Holz Her 1243 Sliding Table Saw
    A message posted at WOODWEB's WOODnetWORK Forum (4/17) -- When I turn my on/off switch to on...it starts up but when I let go...it shuts down. Do I n ...

    Re: Linseed Oil
    A message posted at WOODWEB's Finishing Forum (4/17) -- Wow it will be difficult Start with a rag and mineral spirits or nafta, cleaning as good as y ...

    Re: 1986 Enco/Jet 15" Planer
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- Do you know the motor horse power? Amperage draw is relatively uniform for a given hor ...

    Best cutter for solid white oak
    A message posted at WOODWEB's CNC Forum (4/17) -- Looking for recommendations for a bit to cut solid 3/4" white oak. This would be for milling o ...

    Re: Linseed Oil
    A message posted at WOODWEB's Finishing Forum (4/17) -- What color would he prefer? You can move the color by layering dyes/stains over it. For examp ...

    Re: How to install two pulls opposite each other
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/17) -- Drill the threads out of one of the handles, then drill and tap for A ...

    Re: Mac CNC software and Biesse Rober 4.40
    A message posted at WOODWEB's CNC Forum (4/17) -- We use Bsolid and Mozaik on our Mac in the office. We run it on Parallels. It will work but we have ...

    Re: 1986 Enco/Jet 15" Planer
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- Looked at an older Grizzly catalog. Their similar machines were listed at 18amps @ 220 ...

    Re: Mold making
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- Maybe consider laser scan and 3d cnc carve. Then hand carve and finish the tight detai ...

    Re: Deposits for spec home cabinetry
    A message posted at WOODWEB's Business and Management Forum (4/17) -- This is why I do not work for con-tractors! ...

    Re: 1986 Enco/Jet 15" Planer
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- I've got the Jet version which is 15A @ 230V. ...

    Excel to Alphacam
    A message posted at WOODWEB's CAD Forum (4/17) -- How to create geometry and machining using Excel to Alphacam ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/17) -- You did the right thing. Your a cabinet maker who can create a professional, cl ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/17) -- gentlemen - thanks for your guesses. the shortest, long version is that my inte ...

    compressed air issue
    A message posted at WOODWEB's Finishing Forum (4/17) -- I'm having a fish eye problem that I'm reasonably sure is being caused by something from the ...

    Re: Woven Wood Doors, Part V Success!
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- Kevin - I would certainly change the grain directions in the future to reflec ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/17) -- If I was given that drawer my, I would have had a phone or face to face clarifi ...

    Re: Hardware Management: Nomenclature Improvement
    A message posted at WOODWEB's Business and Management Forum (4/17) -- Kanban is only as good as the people using it. I was in purchasing for a major ...

    Re: Hardware Management: Nomenclature Improvement
    A message posted at WOODWEB's Business and Management Forum (4/17) -- Your only as good as your people. We train everyone on it and how they work. We ...

    Re: Woven Wood Doors, Part V Success!
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- Dave I always been impressed at all your comments on the forums over the year ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/17) -- Although clear to us we would have shown the 37-1/8" clear under the top o ...

    Re: post cat problems
    A message posted at WOODWEB's Finishing Forum (4/17) -- that's not boogers or crap in your finish...... It's air entrapment on a very open pore wood. ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/17) -- Do I win a prize for guessing correctly? Seriously though, I have run into the ...

    Re: Kem aqua plus white spraying technique
    A message posted at WOODWEB's Finishing Forum (4/17) -- the pigmented is indeed very thin. i am using a kremlin AAA, and it does take a little techni ...

    Re: Powered Respirators
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- For general use I would think they would be much more hassle than anything el ...

    Re: Hardware Management: Nomenclature Improvement
    A message posted at WOODWEB's Business and Management Forum (4/17) -- I’m a better video taker than typing guy. Below is a video of our cards and set ...

    Special tool cost
    A message posted at WOODWEB's Business and Management Forum (4/17) -- I would like to hear your views on how to offset the cost of special tools need ...

    Vacuum Pump type
    A message posted at WOODWEB's CNC Forum (4/17) -- We are having problems with our Becker vacuum pumps. The vanes are expensive and we had some fail a ...

    Re: Special tool cost
    A message posted at WOODWEB's Business and Management Forum (4/17) -- In my world the customer pays it all. There is nothing gained in me absorbing a ...

    Re: Wood boring bees
    A message posted at WOODWEB's Sawing and Drying Forum (4/17) -- I had carpenter bees make their home(s) in the eaves of my house. I took the venerabl ...

    Re: Special tool cost
    A message posted at WOODWEB's Business and Management Forum (4/17) -- We sold a kitchen for $146,200. The $140K was because we knew we could get $80K ...

    Re: Onsrud Auto Loader
    A message posted at WOODWEB's CNC Forum (4/17) -- Grab your electrical schematic and do some basic traces, No normally open Nc normally closed If the ...

    Onsrud Auto Loader
    A message posted at WOODWEB's CNC Forum (4/17) -- I know there're some Onsrud people on here. I have a trouble ticket open, but I figured I'd give th ...

    owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/17) -- i don't want to bias any opinions interpretations so please let me know what yo ...

    kremlin 10-14 pump problem
    A message posted at WOODWEB's Finishing Forum (4/17) -- I just rebuilt my 10-14 with the fluid kit ( both balls gaskets and o-rings ) now i can't get ...

    Re: Special tool cost
    A message posted at WOODWEB's Business and Management Forum (4/17) -- Depends on what you mean by a special tool. If you are talking a new Festool Do ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/17) -- Pretty sure you are looking at a plan and elevation, the top is 40"AFF or ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/17) -- Based off of that sketch I would have asked for a clearer drawing or at least c ...

    Re: post cat problems
    A message posted at WOODWEB's Finishing Forum (4/17) -- Could it be solvent pop? It looks like heavy coats on grainy wood, although retarding 5% shou ...

    Any Moulder Runners?
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- Running a Kentwood M609X, and just had a spindle bearing go out on one of the ...

    Re: Kem aqua plus white spraying technique
    A message posted at WOODWEB's Finishing Forum (4/17) -- I'm a spray gun fiend so...Sata 1000K RP for pressure feed (best spray gun I've ever used) an ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/17) -- JM - thanks. this guy is a builder, so i guess i assumed too much by not offeri ...

    Re: Hardware Management: Nomenclature Improvement
    A message posted at WOODWEB's Business and Management Forum (4/17) -- Derrek, That is a great system you have. That would allow people who did not ha ...

    Re: chemcraft verde smell
    A message posted at WOODWEB's Finishing Forum (4/17) -- If your not adding catalyst to Verde, something is wrong. It has to be catalyzed and has a ve ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/17) -- I would read that as counter top is at 40" +/- 2.875 lol. A heavenly toler ...

    Re: Tool Presetter
    A message posted at WOODWEB's CNC Forum (4/17) -- NEMI makes an accurate, low cost tool presetter. Several pocket types supported including cat 30, c ...

    Re: post cat problems
    A message posted at WOODWEB's Finishing Forum (4/17) -- Are you using a sealer? It could be solvent pop especially on open pore wood like oak Try it ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/17) -- The picture is not to the same scale but I think the 40" is the clear ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/17) -- Ill give it a go..... floor to top of counter 42 7/8" ...

    Re: chemcraft verde smell
    A message posted at WOODWEB's Finishing Forum (4/17) -- Sorry, i think the product is "ora verde unico". Single component. ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/17) -- oops that one didn't have the dims ...

    Re: compressed air issue
    A message posted at WOODWEB's Finishing Forum (4/17) -- Do you have an oil filter in the line after the water separater? ...

    Re: Drying an oak slab for coffee table
    A message posted at WOODWEB's Sawing and Drying Forum (4/17) -- I agree with Dale. ...

    Re: Vacuum Pump type
    A message posted at WOODWEB's CNC Forum (4/17) -- I love my Sullair rotary screw. ...

    Re: Used machinery from Europe
    A message posted at WOODWEB's Business and Management Forum (4/17) -- Hi Wyatt, I import equipment from Europe for our company so I offer some sugges ...

    Re: Micro bubbles/pinholes - Kremlin System
    A message posted at WOODWEB's Finishing Forum (4/17) -- We had a similar issue late winter of this year, Stealth and magnamax and nobody could diagno ...

    Re: magnetic contactor for Jet industrial wide belt sander JWB-25P
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Normally a search for the part number is your best bet. Otherwise you'll probably have to ...

    Re: Door parts cut list
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- I use 30"x60"rolling carts to hold rails and stiles. For medium/small orders, e ...

    Re: shelf pin problem
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Closest I know of is the using the basic pins with a flat support surface. I've had a cab ...

    magnetic contactor for Jet industrial wide belt sander JWB-25P
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- We are looking for a magnetic contactor for the widebelt sander in the title. Attached is ...

    Re: Thick door pocket/flipper door hardware
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- I was thinking about taking a router and recessing where the hinge mounts. I didn't know ...

    Re: Door parts cut list
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Nice spreadsheet, thanks for posting that. I have something similar that has evolved over ...

    shelf pin problem
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Got a large open shelving cabinet (no doors) and one of the line bores is off a BIG sixte ...

    Re: shelf pin problem
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- I have had that problem once. I solved it by using the "L" shaped shelf pins an ...

    Re: Mirrored passage doors....
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- We've installed mirrors on both cabinet doors and interior walls and doors. A ...

    Re: Thick door pocket/flipper door hardware
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Hafele Hawa Concepta can do almost 2" thick but doors must be minimum height of 49&q ...

    Re: shelf pin problem
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Jeff is talking about the metal spoon style pins. They were the typical ones for face fra ...

    Re: shelf pin problem
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- What about putting a small dado in the shelf that takes up the space of the offset of the ...

    Re: shelf pin problem
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Rabbet or groove one end of the shelf so it drops down 1/8", do the same on the othe ...

    Re: Mirrored passage doors....
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- David It would seem that that hardware is overkill for the cabinet in the art ...

    Re: Thick door pocket/flipper door hardware
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- How about rabbeting the back edge of the hinge stile? I would try that before messing wit ...

    Re: shelf pin problem
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Could you plug the holes and re-drill by hand and use the metal sleeve supports to hide t ...

    Re: shelf pin problem
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Could you make a matching interior wall to reskin the existing out of 1/4" mdf core ...

    Re: MDF mullion doors
    A message posted at WOODWEB's CNC Forum (4/17) -- Bob, Feel free to call me on my cell phone and we will figure out a time. 860.309.5177 ...

    Re: shelf pin problem
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- I 2nd JeffD, or Alan and Leo's response if you can ...

    Re: Thick door pocket/flipper door hardware
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Accuride 1321? ...

    Re: Alphacam tutorials?
    A message posted at WOODWEB's CNC Forum (4/17) -- Send me file and problem. I'll walk u though it ...

    Re: Dye Stain Only
    A message posted at WOODWEB's Finishing Forum (4/17) -- Sherwin Wlliams S61 concentrate. ...

    Re: shelf pin problem
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Is ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/17) -- All right, Gentlemen, lets just do this properly. I assert that sexism is absol ...

    Re: Porter cable 505 half sheet sander issues
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Ahhhhh, the Porter Cable 505. Dont know why they quit production but its a fine finish sa ...

    White lacquer streaking/dry spray problem
    A message posted at WOODWEB's Finishing Forum (4/17) -- I'm using Rudd UltraClassic white semi gloss lacquer 653035 to paint some cabinets and gettin ...

    Re: Levelling cabinets in factory
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- your absolutely right. Maybe I should rephrase the question to target the overlying issue ...

    Re: Porter cable 505 half sheet sander issues
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Hi Mike..what grits do you generally use. The higher the grit the slower speed motion sho ...

    Re: "Specks" in Chemcraft Pigmented Varnish
    A message posted at WOODWEB's Finishing Forum (4/17) -- Thanks Robert. I appreciate your input. I actually tried changing the blue fluid hose on my K ...

    Re: enRoute software
    A message posted at WOODWEB's CAD Forum (4/17) -- I'm an Enroute fan. Great product, great service, they are always innovating. There's a new release ...

    Re: White lacquer streaking/dry spray problem
    A message posted at WOODWEB's Finishing Forum (4/17) -- I'm in TX and it was raining on and off with some sun, about 70 outside, a little warmer in t ...

    Re: CNC Dovetail drawer boxes
    A message posted at WOODWEB's CNC Forum (4/17) -- The flip operation is for another use not the drawer boxes. Just helps justify a 2nd cnc. I am most ...

    Re: Porter cable 505 half sheet sander issues
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- I have to laugh at happy sanding..gawd do i know what u mean!! Hand sanding is for the pu ...

    Re: oil spice pullout
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- PJ... if you are worried about the bouncem then you need to use a glide at top also to st ...

    Porter cable 505 half sheet sander issues
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- I'm a bit confused as to what needs to be replaced.... When I'm sanding, the sandpaper st ...

    Re: Porter cable 505 half sheet sander issues
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Hi Mike,I hung up my 3M respirator( aka retired)after 30+ years in a booth. Sold off all ...

    Re: First big several month long gig for a longtime millwork shop.
    A message posted at WOODWEB's Business and Management Forum (4/17) -- BTW I'm not very happy with any of you right now but it still begs a mention--t ...

    Re: Porter cable 505 half sheet sander issues
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Thx Robert. I did find parts on ereplacementparts.com. I also noticed that it does tend t ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/17) -- btw when is the last time the finisher texted you at midnight to let you know t ...

    Re: White lacquer streaking/dry spray problem
    A message posted at WOODWEB's Finishing Forum (4/17) -- Looks like quite a bit of moisture to me. Whats the condition of your compressor ? Are you in ...

    Re: "Specks" in Chemcraft Pigmented Varnish
    A message posted at WOODWEB's Finishing Forum (4/17) -- Check you air and fluid hoses. If you are using 'Kremlin' made hoses, I have had problems in ...

    Re: oil spice pullout
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- There are many ways to do it, but first you have to tell us the type you are doing... Upp ...

    Re: Trailer loading
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- been using moving co. for years now on large jobs. local full moving truck load, $200 &am ...

    Re: CNC Dovetail drawer boxes
    A message posted at WOODWEB's CNC Forum (4/17) -- Bob, you can make dovetail boxes with notch's without flip operations. Here's a video of CNC Factor ...

    Re: oil spice pullout
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- I like the Revashelf ones, smooth and good adjustment. They are for base cabinets. ...

    Re: Has anyone used Red Grandis lumber?
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- When we rip a piece of lumber and the two pieces are not straight right after ...

    Re: It's time to chuck cnc in my tool belt.
    A message posted at WOODWEB's CNC Forum (4/17) -- Hi Mel, Firstly, yes you can do this without attending any course. You are already on the right tra ...

    Re: CNC vacuum cfm
    A message posted at WOODWEB's CNC Forum (4/17) -- How many CFM a pump can move only matters as your leakage approaches the point where the work will ...

    Re: Compression bit yield on melamine
    A message posted at WOODWEB's CNC Forum (4/17) -- UPDATE: Thanks a ton for everyone's input. I ended talking with Dan from Connecticut Tool who sugge ...

    Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- I have a Unimat 218 6 head moulder that I am having a lot of trouble with chatter. ...

    Track Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- We do a fair amount of custom crate building for shipping items by common carrier. ...

    Re: Domino df 700
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- As long as we are going a bit off subject, I'l take it further astray... For ...

    power feed mounting
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- moving a power feed from one machine to another and have to decide which side to put it o ...

    Re: Sherwin Williams white conversion varnish
    A message posted at WOODWEB's Finishing Forum (4/17) -- Ok. I'm pretty sure that it is a catalyzed primer and not a CV. You cannot leave it alone wit ...

    Re: It's time to chuck cnc in my tool belt.
    A message posted at WOODWEB's CNC Forum (4/17) -- Mel, There are lots of programs to produce code for the machine. Everyone of them will take part ge ...

    Re: Track Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- I've never used the Shop Fox, but do use the Festool, who pioneered this type of s ...

    Toolholder and Collets ADVICE - ER v. EOC
    A message posted at WOODWEB's CNC Forum (4/17) -- We have a Weeke Vantech 512 CNC and are looking to buy a few more toolholders for the first time. W ...

    Anyone using a filesharing tool to collaborate with clients?
    A message posted at WOODWEB's Business and Management Forum (4/17) -- We use a shared drive on our server to capture pdfs of all drawings and paperwo ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- I can't say why, if I could I probably would have found the problem much sooner, I ...

    Re: shop layout software
    A message posted at WOODWEB's Business and Management Forum (4/17) -- I think an important design criteria is to minimize dust, air and power runs an ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Ok, I guess I'm going to answer my own question. After a day and a half of trying ...

    Re: how do you support a commercial bar
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- I have done two commercial bars. Both times the main bar surface was granite with a tradi ...

    Re: It's time to chuck cnc in my tool belt.
    A message posted at WOODWEB's CNC Forum (4/17) -- K-- so I have trouble unfolding who thinks autocad is too hard and how bad it actually is. Every en ...

    how do you support a commercial bar
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- we're bidding a local restaurant bar top and they want to a 3"-4" thick bar top ...

    Re: Anyone using a filesharing tool to collaborate with clients?
    A message posted at WOODWEB's Business and Management Forum (4/17) -- For what it is worth I am typing this response on an iPad running AT&T LTE ...

    Re: Sherwin Williams white conversion varnish
    A message posted at WOODWEB's Finishing Forum (4/17) -- Let me tell you about thinning, I use Auto grade "Urethane Reducer" It works better ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Can you explain why dull knives in one head produce this pattern? If sharpening or ...

    Re: Sherwin Williams white conversion varnish
    A message posted at WOODWEB's Finishing Forum (4/17) -- Yes, that's correct. I was told to do that by the owner/founder of SPI auto paints, He's a ch ...

    Re: Track Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- A used Safety Speed Cut panel saw would be just about your best solution. The saw ...

    Makita 9 1/4" Circular Saw Serious problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- This circular cannot cut perfectly 90 degree, but with serious distortion of 90 de ...

    Does good quality plywood exist?
    A message posted at WOODWEB's CNC Forum (4/17) -- I'm going to be cutting out some monograms and other similar items that will need more strength tha ...

    Re: Figuring Highs and lows of a room
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/17) -- I would think that you'd want to draw a continuous level line around ...

    Re: Up Grading CNC
    A message posted at WOODWEB's CNC Forum (4/17) -- Tom, It's nice to hear your business is growing and that you will be upgrading your capacity. I rec ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Glad you figured it out. That was going to be my suggestion as well. We recently h ...

    Re: how do you support a commercial bar
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Back in the day it was with my hard earned money and then when I ran out of cash I suppor ...

    Re: dark brown finish on cherry
    A message posted at WOODWEB's Finishing Forum (4/17) -- Yes, the red does come back over time. It is cherry. So far, my customers like it. I have som ...

    Re: Track Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- I made a track saw, and it works quite well. then i combine track saw with 90 degr ...

    Re: Sherwin Williams white conversion varnish
    A message posted at WOODWEB's Finishing Forum (4/17) -- Yes colortones. It's made by Sherwin Williams but in Conestoga info it doesn't say anything a ...

    Re: WIDE BELT SANDER INFO
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Adam, Save me the time from talking to the abrasives people. With a 80-120 sequenc ...

    Re: Sherwin Williams white conversion varnish
    A message posted at WOODWEB's Finishing Forum (4/17) -- Jim Clark Are you saying you are putting "urethane reducer" in (solvent) CV and pre ...

    Re: aro. cedar insect damage repair,possible fixes?
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- My guess is that is not termite damage but instead the work of ants. Termites arent re ...

    Re: Figuring Highs and lows of a room
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/17) -- Btw, i used a 32mm system via CnC for the verticals and some of the l ...

    Re: Sherwin Williams white conversion varnish
    A message posted at WOODWEB's Finishing Forum (4/17) -- Al, Are you talking about Conestoga's Colortones or some other pigmented CV product that I do ...

    Re: Hardwood question
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Even at the same moisture content my old wood is way more stable than my newer wood. I le ...

    Re: Figuring Highs and lows of a room
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/17) -- I did that and found out the hard way cuz the ceiling dips in mamy ar ...

    Re: dark brown finish on cherry
    A message posted at WOODWEB's Finishing Forum (4/17) -- Color opposites Yellow----opposite is purple Red---- opposite is green Orange---- opposite is ...

    Re: Sherwin Williams white conversion varnish
    A message posted at WOODWEB's Finishing Forum (4/17) -- Thanks Jim Clark! Time to experiment...... ...

    Re: Original 3-1/4 HP Plunge Router Flush Bit
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Can you post a picture of your bit? ...

    Re: Track Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- There is another brand of similar saw on Ebay now. BH Davis ...

    Re: power feed mounting
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- I've always mounted them on the right. ...

    Re: Sherwin Williams white conversion varnish
    A message posted at WOODWEB's Finishing Forum (4/17) -- ohhh boyyyy..... ...

    Re: Need help to id log wood
    A message posted at WOODWEB's Adhesives Forum (4/17) -- My guess Pacific Madrone ...

    Re: Flattening (reasonably) curly cherry board
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- Not over half, but before you even do that, I would try this first. If you have any th ...

    Re: Flattening (reasonably) curly cherry board
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- Monte: Read Geoff's response over and over. The only way to use this plank is to eithe ...

    Re: Flattening (reasonably) curly cherry board
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- Well, Monte, I guess I'm going to be the contrarian this time. I think you can do what ...

    Re: Microvelum with RouterCim
    A message posted at WOODWEB's CAD Forum (4/17) -- Router-CIM can cut and nest the Microvellum Solids or their 2D drawing. There are many advantages t ...

    Re: Flattening (reasonably) curly cherry board
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- Gentlemen, thank you. I assume all of you are speaking from experience. I was about to ...

    Re: Flattening (reasonably) curly cherry board
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- Only place I'd disagree is with veneering it onto mdf. I wouldn't recommend it for a c ...

    SAC Planer problem Table Lift
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- I acquired new 05 model 20" SAC planer and can't get the table to move. It wa ...

    Re: switching to solid model
    A message posted at WOODWEB's CAD Forum (4/17) -- Probably a good decision certainly will avoid any further financial investment. Just time and any r ...

    Re: rail to newel cap joint
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- I planned on using a rail bolt for reconnecting it. My issue is that it is sl ...

    Re: Cutting a cherry log with my homemade bandsaw mill
    A message posted at WOODWEB's Sawing and Drying Forum (4/17) -- "When I'm done using the sawmill i can unbold the thing and use the stuff to bui ...

    Re: rail to newel cap joint
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- A standard large rail bolt will do it just fine, once rail and cap are taken ...

    Re: Here's how I sharpen my band blades by hand
    A message posted at WOODWEB's Sawing and Drying Forum (4/17) -- I do it the same way with a grinder but have found over the years, that I get a bette ...

    Re: Flattening (reasonably) curly cherry board
    A message posted at WOODWEB's Furniture Making Forum (4/17) -- If you kerf the board then try force it flat it will most likely crack. The good is, y ...

    Vcarve and Biesse
    A message posted at WOODWEB's CAD Forum (4/17) -- Has anyone been able to run vcarve pro on a Biesse Klever. If so what did you have to alter in the ...

    Re: switching to solid model
    A message posted at WOODWEB's CAD Forum (4/17) -- It's worth a second look...I hope it works out. I sunk a pretty penny into Microvellum, so I know t ...

    Cabinet vision 2012 latest version
    A message posted at WOODWEB's CAD Forum (4/17) -- I have Cabinet Vision version Solid_7_1_1_113 and looks that when i go to 3-D mode computer running ...

    Re: rail to newel cap joint
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- Rail-to-cap connections were usually glued and bolted unless cap diameters we ...

    Re: switching to solid model
    A message posted at WOODWEB's CAD Forum (4/17) -- Mark, You've won me over. We're going to have one of my guys peel off and re-familiarize themselves ...

    Re: KCD consultant
    A message posted at WOODWEB's CAD Forum (4/17) -- Hi Akram, There is not anything to up load into KCD, it is going through the cut list and setting i ...

    Re: Cabinet vision 2012 latest version
    A message posted at WOODWEB's CAD Forum (4/17) -- Any idea what is wrong Taking so long to create 3-D It was ok before on same computer ...

    Re: Kiln control
    A message posted at WOODWEB's Sawing and Drying Forum (4/17) -- It normally takes us about 2 weeks if we are rushing a controller order. We use Partl ...

    Re: Cabinet vision 2012 latest version
    A message posted at WOODWEB's CAD Forum (4/17) -- CV Solid 2012 R2 Version 7.1.1.113 That is the last update done for this version. ...

    Re: Cutting a cherry log with my homemade bandsaw mill
    A message posted at WOODWEB's Sawing and Drying Forum (4/17) -- Good job, Rod. ...

    Re: rail to newel cap joint
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- pretty sure it's glued together. ...

    Re: rail to newel cap joint
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- A picture or two may help us ...

    Valuable Timber?
    A message posted at WOODWEB's Forestry Forum (4/17) -- I'm harvesting a few trees from my property for my own use as saw logs and firewood. A friend ...

    Anatomy of table saw arbor assembly
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/17) -- Can anybody tell me how table saw arbors are put together? They seem ...

    Re: Anatomy of table saw arbor assembly
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/17) -- I think your going to need to be more specific, different saws are go ...

    Re: Question about pressure sensitive veneer over latex paint
    A message posted at WOODWEB's Veneer Forum (4/17) -- I also advise that you clean the painted surface with de-natured alchohol , scrape off any high ...

    Re: 20 mil paperback seperating from backing
    A message posted at WOODWEB's Veneer Forum (4/17) -- I have used paper backed veneer for over 20 years with out any serious problems. I have found th ...

    Re: Wood Filler
    A message posted at WOODWEB's Veneer Forum (4/17) -- I have used the "Bondo trick" also with good success. What has worked the best was to ...

    Re: Contact cement
    A message posted at WOODWEB's Veneer Forum (4/17) -- I have been using the 3M Fastbond 30NF Contact for several years now. Works very well for me whi ...

    Re: Tightest radius for paper back veneer bending?
    A message posted at WOODWEB's Veneer Forum (4/17) -- Let the veneer acclimate before using and you may need to double or even triple coat your area w ...

    Re: Distributors of Panel Mounting Hardware
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/17) -- Monarch, eagle moldings, fast cap. ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/25) -- Thank you all for responding. I already did everything you have mentioned. The ...

    Re: smoothing out a finish
    A message posted at WOODWEB's Furniture Making Forum (3/17/25) -- While the paper bag trick can work well it also depends on the timing and the type ...

    Re: Time for a good customer service story for a change
    A message posted at WOODWEB's Business and Management Forum (3/17/25) -- I've had the same experience with Stiles. I purchased a Weeke pod and rail w ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/25) -- It has been several years since I had a Weinig tech come to the shop to go over ...

    Re: Weinig 1200 6 head moulder
    A message posted at WOODWEB's Value Added Wood Processing Forum (3/17/25) -- When Weinig techs train your people, things like this are covered thorou ...

    Re: Stratos pro post.
    A message posted at WOODWEB's CNC Forum (3/17/25) -- I have edited some of my Gcode for files that I use frequently (like spoilboard shave) to turn o ...

    Re: drawer slides
    A message posted at WOODWEB's Cabinetmaking Forum (3/17/25) -- I’ve heard of companies like Accuride, Fulterer, and Knape & Vogt making slides in ...

    Re: Where there's smoke...
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17/25) -- Good reminder to be diligent about noises when we're running. FYI- Nothing ...

    Re: Stratos pro post.
    A message posted at WOODWEB's CNC Forum (3/17/25) -- Many CNC routers, including Anderson models, allow for vacuum zones to be controlled through cus ...

    Holzher edgebander problems
    A message posted at WOODWEB's Cabinetmaking Forum (3/17/24) -- Hi, i recently bought a used holzher auriga But now i have glue spilling over the top ...

    Re: Anyone Tried Sher-wood F3 Kemvar Formaldehyde Free Coating?
    A message posted at WOODWEB's Finishing Forum (3/17/24) -- I'm guessing l've sprayed well over 1,000 gallons of SW's F3. Very good product. Sands gre ...

    Re: Need help with gcode!
    A message posted at WOODWEB's CNC Forum (3/17/24) -- Hi all, I'm here to share my friend's project. He created a plugin to plot gcodes in Notepad++. ...

    Re: question about Titebond 3
    A message posted at WOODWEB's Adhesives Forum (3/17/24) -- Trex is not wood. It is a PVC product with some material, perhaps wood dust, blended in. I ...

    Re: question about Titebond 3
    A message posted at WOODWEB's Adhesives Forum (3/17/24) -- Oh, if its trex type stuff, forget it. Mechanically fastened only. As an aside tb3 is shit ...

    Re: question about Titebond 3
    A message posted at WOODWEB's Adhesives Forum (3/17/24) -- West system epoxy ...

    Need a new (or used) shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/23) -- We have been using Weaver shapers for approx. 25 years now. Getting old and sol ...

    Re: Need a new (or used) shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/23) -- Powermatic shapers are too expensive and only suited for light duty work. Light ...

    Small edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (3/17/23) -- Having used the peel and stick, and finished and unfinished wood iron on, I have reach ...

    Re: Questions: re: carving wood blanks on one-side only
    A message posted at WOODWEB's Value Added Wood Processing Forum (3/17/23) -- That is nice work, and a shame that you are having problems. Before I ca ...

    Re: Small edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (3/17/23) -- I don't see why it won't work for shelves. Long stuff might be an issue as it doesn't ...

    Re: Wood spieces
    A message posted at WOODWEB's Furniture Making Forum (3/17/23) -- It looks like rubberwood to me. Pretty common for mass produced asian furniture. Go ...

    Re: Need a new (or used) shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/23) -- If I were shopping for new shapers, I would only look at machines that used an ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/22) -- 35 year Millwork veteran running everything from Diehl push feeds (square heads ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/22) -- Hello Chris There are advantages to having more than two pockets on a cutter he ...

    Clamping slab doors with outside applied moulding
    A message posted at WOODWEB's Cabinetmaking Forum (3/17/22) -- Applied moulding on the inside of the door frame was always a pain to install by hand. ...

    Re: Cabinet Vision / Mozaik
    A message posted at WOODWEB's CAD Forum (3/17/22) -- Hi, You could try posting this request on the Jobs (and Services) Exchange - link below. If you ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/22) -- Thanks Russ, I was hoping you’d chime in. Unrelated to this topic, and likely d ...

    Scm T120 C shaper
    A message posted at WOODWEB's Cabinetmaking Forum (3/17/22) -- I spent a couple hours on the internet looking for information on this machine, it is ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/22) -- Profimat entry level Unimat medium production level Hydromat heavy production. ...

    Re: Glue System for Drawer Bottoms
    A message posted at WOODWEB's Adhesives Forum (3/17/22) -- perley , Which hot melt gun/system are you using? What is your recommendation on glue? ...

    Re: NEW CNC Recommendation for Mostly Cabinet Production
    A message posted at WOODWEB's CNC Forum (3/17/22) -- Have you included software in that budget? Tooling? Dust collection? ...

    Re: Clamping slab doors with outside applied moulding
    A message posted at WOODWEB's Cabinetmaking Forum (3/17/22) -- Could use pinch clamps. The ones with soft tips. ...

    Re: NEW CNC Recommendation for Mostly Cabinet Production
    A message posted at WOODWEB's CNC Forum (3/17/22) -- The budget includes consumables and some accessories or shipping ...

    Re: Clamping slab doors with outside applied moulding
    A message posted at WOODWEB's Cabinetmaking Forum (3/17/22) -- What about a band clamp around the perimeter? ...

    Re: Mozaik Help
    A message posted at WOODWEB's CAD Forum (3/17/22) -- I have an Anderson and Mozaik. Works flawlessly, just ask for help ,they will help you set it up ...

    Re: Cabinet Vision / Mozaik
    A message posted at WOODWEB's CAD Forum (3/17/22) -- Yes. Seriously. ...

    Re: Cabinet Vision / Mozaik
    A message posted at WOODWEB's CAD Forum (3/17/22) -- Seriously ? ...

    Re: state of the economy
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Pat Gilbert: I suppose then that you and I should follow Rob Cabral's advice an ...

    Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- We have a 40 year old Rockwell/SCMI T120C shaper. It has had a very long and prett ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- David Waldman: For the shaper that I own I made a plywood fence that ran the full ...

    Re: Questions about New Thickness Planer Options
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- As for infeed rollers, I'm surprised they offer solid. Assuming you're in the USA ...

    Re: state of the economy
    A message posted at WOODWEB's Business and Management Forum (3/17) -- I would agree that the sales guys will be using this at their advantage to rais ...

    Panel saw blades
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Hi everyone, I’m hoping for a little insight on panel saw blades. I have a 10’ sliding pa ...

    Re: BENZ Aggregates
    A message posted at WOODWEB's CNC Forum (3/17) -- I work in a large company, I am simply a tiny cog in a large machine and I was dumped on my CNC for ...

    Re: BENZ Aggregates
    A message posted at WOODWEB's CNC Forum (3/17) -- Steven, If you are using them on a daily basis, I am sorry. I think that if you need to use them th ...

    Re: Panel saw blades
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- In my experience the shallower entrance and exit angles of the larger blade are the prima ...

    diffuser
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (3/17) -- A couple of years ago I visited a plant no longer in business tha ...

    Re: state of the economy
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Up until now I've seen little impact in shortages in cabinet construction mater ...

    Re: shallow wide drawer
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- I can second the Tandem slides. I have made some ridiculously sized drawers and have had ...

    Waterproofing heat resistant epoxy
    A message posted at WOODWEB's WOODnetWORK Forum (3/17) -- I have undertaken the task of making a wooden farm style sink. I am done in the building pr ...

    Re: MDF Door- Square Corner problem
    A message posted at WOODWEB's CNC Forum (3/17) -- Any time that happened to me albeit in Aspire it was the angle supplied with the tool was wrong so ...

    DH kiln vs Vacuum kiln
    A message posted at WOODWEB's Sawing and Drying Forum (3/17) -- We are in the market for a kiln, we've been milling for over 10 years and the person ...

    Re: Panel saw blades
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- I didn’t consider the extra cost of sharpening, thanks for mentioning that! It also just ...

    Re: Busellato JET 3006 cooling error
    A message posted at WOODWEB's CNC Forum (3/17) -- Thank you Steve and Eric. Our CNC is an oldy but a goody. I didn't find anything in the software th ...

    Replacement for Charles Neil's Blotch Control
    A message posted at WOODWEB's Finishing Forum (3/17) -- We have been using this for several years. We understand that Charles passed away in late 201 ...

    BiesseWorks, how to change the default folder path when opening a file
    A message posted at WOODWEB's CNC Forum (3/17) -- Hi, I was wondering if it's possible to change the folder path when I want to open a file ? I looke ...

    Re: CABINET VISION CUSTOM MACHINING
    A message posted at WOODWEB's CNC Forum (3/17) -- Yeah thank you I thought it would have to be something in the user created standards.. not fully go ...

    Re: AlphaCAM price?
    A message posted at WOODWEB's CAD Forum (3/17) -- If you have a Cabinet Vision sales guy that you know, he can give you a price. Also, most machine m ...

    Re: MDF Door- Square Corner problem
    A message posted at WOODWEB's CNC Forum (3/17) -- Z height calibration is critical for V bits. Also have a look at the tip with a magnifying glass to ...

    Re: DH kiln vs Vacuum kiln
    A message posted at WOODWEB's Sawing and Drying Forum (3/17) -- Night and day difference in time and degrade. I have no personal experience with a va ...

    Re: state of the economy
    A message posted at WOODWEB's Business and Management Forum (3/17) -- David, I realize prices vary regionally but I was just quoted $5400 p/m deliver ...

    AlphaCAM, adding tabs in v2019
    A message posted at WOODWEB's CAD Forum (3/17) -- I tried coaching a friend two days ago, and could not locate "add tabs" in his copy of Ad ...

    AlphaCAM price?
    A message posted at WOODWEB's CAD Forum (3/17) -- Does anybody here know what the current price for AlphaCAM Advanced is? The people at Vero are impo ...

    Re: AlphaCAM, adding tabs in v2019
    A message posted at WOODWEB's CAD Forum (3/17) -- 86 this question..........it's under edit machining. Duh. Different from older v17r2 version I use. ...

    Re: Pre-mil
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/17) -- Your bander may have an empty space where you can add a premill station ...

    Re: Festool 4/1 price increase
    A message posted at WOODWEB's Business and Management Forum (3/17) -- I fired myself today. Well, maybe not fired, but laid myself off. We are a two ...

    Re: Powermatic shaper
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Agree'd Adam, I was a bit staggered at the price when we had it done myself but I was in ...

    Re: Construction Question - Kidney Bean Shaped Desk with Curved Legs
    A message posted at WOODWEB's Furniture Making Forum (3/17) -- Thank you Thomas and Dave for your helpful replies. Dave - I certainly will draft full ...

    Re: Going from HVLP to AAA
    A message posted at WOODWEB's Finishing Forum (3/17) -- Pascal I use a Rolair VT 25 air compressor that puts out 6.5 CFM@90 psi I think your Makita i ...

    Re: Adjusting wide belt sander bed
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- Critical thought for a 4 post leveling: Locate the four jack points on the top of ...

    Re: Festool 4/1 price increase
    A message posted at WOODWEB's Business and Management Forum (3/17) -- I agree with both views on this, but obviously hoping for the less severe versi ...

    Re: Construction Question - Kidney Bean Shaped Desk with Curved Legs
    A message posted at WOODWEB's Furniture Making Forum (3/17) -- Torsion box top with 3/8" MDF, and solid 'edgebands' rabbeted to fit under the to ...

    Re: Fusion 360 Pros and Cons
    A message posted at WOODWEB's CNC Forum (3/17) -- Matt, Like you, I'm a long time MV user. Also, about a year ago, I had an odd project I decided to ...

    Re: Continuing Assistance
    A message posted at WOODWEB's CAD Forum (3/17) -- When ? About 20 minutes before you typed your question from the sound of it. Look at it another way ...

    Re: Festool 4/1 price increase
    A message posted at WOODWEB's Business and Management Forum (3/17) -- There has to be over investment for there to be a correction. There was big tim ...

    Re: Going from HVLP to AAA
    A message posted at WOODWEB's Finishing Forum (3/17) -- So I'm not sure about the amount of liquid it takes to start up but 500 ml or half of Qt soun ...

    Re: Adjusting wide belt sander bed
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- 2 post leveling is simpler, but there may be a mechanism/adjustment for front/back ...

    Re: Going from HVLP to AAA
    A message posted at WOODWEB's Finishing Forum (3/17) -- thanks mastercab for your answer. this reassure me about my compressor. If I ever get one I w ...

    Re: Construction Question - Kidney Bean Shaped Desk with Curved Legs
    A message posted at WOODWEB's Furniture Making Forum (3/17) -- Thanks Rich. I was thinking about that - the internal coves would be relatively straig ...

    Re: Powermatic shaper
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Thank you Sean! On your PM do you mean the spindle where you place the cutters is 1" ...

    Re: Powermatic shaper
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- KCR: I just compared a PM 26 quill assembly to one in a Grizzly copy. The pulley matched, ...

    Re: Going from HVLP to AAA
    A message posted at WOODWEB's Finishing Forum (3/17) -- If your compressor is rated for 6.5 cfm and you are pulling 6cfm it will be running nonstop. ...

    Re: Methyl Hydrate finish repair
    A message posted at WOODWEB's Finishing Forum (3/17) -- Get yourself a can of aerosol mohawk Super blush retarder..... spray 12-16" from surface ...

    Re: Adjusting wide belt sander bed
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- Ok that all sounds good. I will attempt all this today. Sorry I did not post pics ...

    2 part polyurathane finish for redwood
    A message posted at WOODWEB's Finishing Forum (3/17) -- I'm looking for the best 2 part polyurathane finish to give me a natural looking finish (not ...

    Re: Construction Question - Kidney Bean Shaped Desk with Curved Legs
    A message posted at WOODWEB's Furniture Making Forum (3/17) -- I'd probably do the legs as soft maple laminations and send it through the Williams an ...

    Re: Powermatic shaper
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- KCR, The pulleys seem to be the same diameter, and belt groove width, so yes the pulley s ...

    Re: Jobsite hinge painting
    A message posted at WOODWEB's Finishing Forum (3/17) -- Spray the hinges with Teflon dry spray before you install them. The paint shouldn’t stick to ...

    Whiskey barrel production per MBF of stave logs
    A message posted at WOODWEB's Sawing and Drying Forum (3/17) -- Curious if anyone has a rough rule of thumb to estimate the number of whiskey barrels ...

    Re: Continuing Assistance
    A message posted at WOODWEB's CAD Forum (3/17) -- Brian Whom are you referring to, a software user, an employee, a customer? ...

    Re: Should I consider CNC
    A message posted at WOODWEB's CNC Forum (3/17) -- Lots of good advice, years ago I learned to build cabinets but using a sliding saw, I would cut the ...

    Re: What size compressor?
    A message posted at WOODWEB's Finishing Forum (3/17) -- somewhat depends on whether you have single or 3 phase but buy the largest one you can afford ...

    Re: Should I consider CNC
    A message posted at WOODWEB's CNC Forum (3/17) -- It all depends on what dust collection you have now and what compressor you have. You need good dus ...

    Re: Pre cat lacquer rub out
    A message posted at WOODWEB's Finishing Forum (3/17) -- Thanks for the responses! I've been using pre-cat because that's what I can get at a local Be ...

    Re: Redwood Beams Wicking Water
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- Looks like a bad design why have the beams stick beyond the roof , even if yo ...

    Re: Pre cat lacquer rub out
    A message posted at WOODWEB's Finishing Forum (3/17) -- There are some paint stores that carry post catalyzed products. Lenmar, as you are already us ...

    Re: Off the shelf match Panel
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- Got 10 sheets of it from Columbia Forest Products through a vendor in St Loui ...

    Exterior bench material
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- We have a job to build three solid wood park benches . We have to match exist ...

    Re: Off the shelf match Panel
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- I never thought of it, the back side of the doors and ends is a rift book mat ...

    Re: Colombo Spindles
    A message posted at WOODWEB's CNC Forum (3/17) -- Call them. They most likely will want to evaluate, then give you a price. Sent a servo motor yaskaw ...

    Re: Should I consider CNC
    A message posted at WOODWEB's CNC Forum (3/17) -- The closer for me a long time ago: A router payment will cost you 1.5 a month or so Or you can have ...

    Re: Should I consider CNC
    A message posted at WOODWEB's CNC Forum (3/17) -- That's the other thing. What do you think im looking at in terms of shipping, delivery, and extra m ...

    Re: Pre cat lacquer rub out
    A message posted at WOODWEB's Finishing Forum (3/17) -- When I was spraying precats with an HVLP I used a 1.7mm tip, and a 2.0mm with primers. Now I ...

    Click rules for the visually impaired woodworker
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- I have three click rules that I would like to give to visually impaired woodworkers. ...

    Re: Curved moulding clamps
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- We have Stack curved millwork clamps , they work well ...

    Re: Colombo Spindles
    A message posted at WOODWEB's CNC Forum (3/17) -- Buy new from china ,for 2500$ copy HSD but bater with bater ceramic bearing ...

    Re: Exterior bench material
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- Only if you want more trouble with the joinery. ...

    Re: Colombo Spindles
    A message posted at WOODWEB's CNC Forum (3/17) -- PDS is worth checking out ...

    Re: What are the risk of using air dried pine logs to build a log abin
    A message posted at WOODWEB's Sawing and Drying Forum (3/17) -- Gene I understand setting the pitch BUT how did they build cabins 100 yrs ago as ther ...

    Re: Stain issues
    A message posted at WOODWEB's Finishing Forum (3/17) -- You use a wood that's prone to blotching. That's ok, but you have to introduce a step to cont ...

    Re: I will never complain about the price of plywood
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Given the gains in additive manufacturing it is not hard to imagine a time when ...

    Re: laquer blushing
    A message posted at WOODWEB's Finishing Forum (3/17) -- How do you know what the finish is? Did you apply the original finish? Did you see the origin ...

    Re: What are the risk of using air dried pine logs to build a log abin
    A message posted at WOODWEB's Sawing and Drying Forum (3/17) -- Many, if not most, log cabins were temporary until they owners built a house sided wi ...

    Re: Sanding preferences?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Door shop guy, the Deros seems to basically be the same sander as the ceros as far as fun ...

    Re: Sanding preferences?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Mike, how are you liking the Deros? I have a Ceros and i LOVE it and wish they still made ...

    Re: face frames
    A message posted at WOODWEB's CNC Forum (3/17) -- I cut paint grade raised or shaker panels of any profile right in the frame fairly often, sometimes ...

    Re: Glaze alternatives
    A message posted at WOODWEB's Finishing Forum (3/17) -- Is the wire-brushed grain supposed to be filled white? If the joint compound works, why not u ...

    Re: What are the risk of using air dried pine logs to build a log abin
    A message posted at WOODWEB's Sawing and Drying Forum (3/17) -- 100 years ago the standing stock was much different than today. Old growth timber cou ...

    Re: Speedy 207...Antique CNC or Boat Anchor?
    A message posted at WOODWEB's CNC Forum (3/17) -- Thanks Jarvis, I might hit you with some questions. Seems like there are a few common error codes. ...

    Re: Speedy 207...Antique CNC or Boat Anchor?
    A message posted at WOODWEB's CNC Forum (3/17) -- Dont have experience on this machine, but depending on what you are doing and how much time you are ...

    Re: CNC Router bits failing - new material
    A message posted at WOODWEB's CNC Forum (3/17) -- Isn't it funny how architects think they know more about woodworking than woodworkers! I had one th ...

    Re: Splits developing
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- It's always good to surface and mill any lumber-particularly 6/4 and thicker- ...

    Speedy 207...Antique CNC or Boat Anchor?
    A message posted at WOODWEB's CNC Forum (3/17) -- I have the opportunity to pick up an unused Masterwood "Speedy 207" for next to nothing. ...

    I will never complain about the price of plywood
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Here are two videos that provide an interesting juxtaposition of how plywood is ...

    Horizontal Boring
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- My question is for those of you who use dowels in the construction of your do ...

    Re: Electric da sander to buy
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Doesn't DA stand for "disc abrasive"? We've got a couple of Mirka Ceros sanders ...

    Re: Electric da sander to buy
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Thanks for the replies. I thought da meant "dual action" sander and was the sam ...

    Re: Speedy 207...Antique CNC or Boat Anchor?
    A message posted at WOODWEB's CNC Forum (3/17) -- It appears it can import ISO g-code. The trick might be getting the code from the desktop computer ...

    Re: What are the risk of using air dried pine logs to build a log abin
    A message posted at WOODWEB's Sawing and Drying Forum (3/17) -- Thanks Dr. Gene and Tim for your response thoughts and input Here' are some photos of ...

    Re: I will never complain about the price of plywood
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Wow. I have heards reps tell me that they've been to ply factories in China tha ...

    Re: Uhling Case Clamp
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- I used my Uhling HP3000 for years, but due to changing construction methods I’m trying to ...

    WoodWop DXF Layer Help
    A message posted at WOODWEB's CAD Forum (3/17) -- hi guys, i need help with DXF layers for Woodwop 7 anybody on here is a expert on that who could he ...

    Re: Speedy 207...Antique CNC or Boat Anchor?
    A message posted at WOODWEB's CNC Forum (3/17) -- Yeah, there is even this kinda devices that you can transfer via network to a floppydrive. Would th ...

    AAA with catalyst pump
    A message posted at WOODWEB's Finishing Forum (3/17) -- Anyone using a AAA with the catalyst added as you go. Thinking it should save product. Any re ...

    Re: Laguna wide belt sander
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Check out Apex. Pretty sure it comes out of the same factory as Timesavers with a few les ...

    Re: Speedy 207...Antique CNC or Boat Anchor?
    A message posted at WOODWEB's CNC Forum (3/17) -- K mag If you need I used to run one its been a few years but might still remember just enough to ge ...

    Re: WoodWop DXF Layer Help
    A message posted at WOODWEB's CAD Forum (3/17) -- Here is the link on how to name your layers for WoodWop. Johann Huck The Machine Warehouse, LLC. 70 ...

    Re: I will never complain about the price of plywood
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Check out this one how plywood is manufactured in India. ...

    Re: CAM software
    A message posted at WOODWEB's CNC Forum (3/17) -- Drop,,,if u wanna give mc a shot,,,just push the button and I’ll have our guy put some wings on a m ...

    Re: WoodWop DXF Layer Help
    A message posted at WOODWEB's CAD Forum (3/17) -- Stiles Link https://www.stilesmachinery.com/articles/assigning-woodwop-layer-names-to- dxf-geometry ...

    Re: I will never complain about the price of plywood
    A message posted at WOODWEB's Business and Management Forum (3/17) -- I think youve got a link posting problem lol ...

    Re: Best Material For a Folding Table Top Surface
    A message posted at WOODWEB's Furniture Making Forum (3/17) -- Link is for 4x8 and 5x10 Panolite, 1-3" thick. ...

    Re: I will never complain about the price of plywood
    A message posted at WOODWEB's Business and Management Forum (3/17) -- I posted wrong link ...

    Re: Machinery auctions
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Thanks Fred, I'll keep an eye on that site. ...

    Re: WoodWop DXF Layer Help
    A message posted at WOODWEB's CAD Forum (3/17) -- Johann ,,,saw yours 10 seconds,,,,lol pardon ...

    Re: Pausing in Woodwop, HOPS, and Biesseworks
    A message posted at WOODWEB's CNC Forum (3/17) -- Alan: We are not working withing Woodwop so we don't have access to the NC icon. We are writing cod ...

    Re: Pausing in Woodwop, HOPS, and Biesseworks
    A message posted at WOODWEB's CNC Forum (3/17) -- Dylan: Remember, Cabinet Pro CNC writes the code directly to Biesseworks. Does your response mean t ...

    too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- we're experiencing a strange happening in the shop this week and i wanted to get a little ...

    finishing an arched curly maple surface
    A message posted at WOODWEB's Finishing Forum (3/17) -- I am an amateur violin builder with little to no experience in the finishing department. My l ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- I know this is always met with disagreement at the hands of years of experience but there ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- With regard to glue starvation, I did a test on six identical joints of cherry 6" x ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- I agree with the other guys. I have never seen a clamped to tight pva glue line fail. It ...

    Tall oversized raised panels
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- I have to make 12 feet high raised panels and am worried about wood movement and installa ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Most yellow glues dry within an hour. So if you clamp something up at the end of the day ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- rich, it wasn't dropped. we glued it up on a low cart and my best employee reported the b ...

    Re: Pausing in Woodwop, HOPS, and Biesseworks
    A message posted at WOODWEB's CNC Forum (3/17) -- Thank you very much everyone!!! Biesseworks, Woodwop, G-Code, and SB-Code are all taken care of now ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- It takes a lot to split a piece of wood from the side. You can drive a wedge in from the ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- david and bill, my thoughts are bad glue, but we work from 3-4 ketchup (squeeze) bottles ...

    Re: Tall oversized raised panels
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- African mahogany is not stable. If we are talking about the random stuff we get in the St ...

    Re: finishing an arched curly maple surface
    A message posted at WOODWEB's Finishing Forum (3/17) -- I'm pretty sure it will take more than a reply on this forum to get all those questions cover ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- mark - i know the article with clamp placement but didn't remember the pressure part of i ...

    Re: Pausing in Woodwop, HOPS, and Biesseworks
    A message posted at WOODWEB's CNC Forum (3/17) -- Frank, This is the NC stop info for WoodWop: 9.2.15 NC-Stop: NC-Stop-Makro ID-Number: 117 E.g.: < ...

    Re: Straight line Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- An SLR is for prepping molder blanks or prepping edges for gluing. It is a rough m ...

    Re: Interior door veneer splitting
    A message posted at WOODWEB's Furniture Making Forum (3/17) -- You are making the case for 'locally produced millwork" and not shipping long dis ...

    Re: Project Tracking / PM Software
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Ben, It is a true challenge to optimally schedule multiple, concurrent, diverse ...

    Educating folks on Feeds N Speeds?
    A message posted at WOODWEB's CNC Forum (3/17) -- I just started at a new shop, and predictably the CNC operator is running the machine at very slow ...

    Straight line Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- Hello All I'm looking to add a Straight line to my Cabinet shop, we do most Face f ...

    Re: Drawer box ideas
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Rich, Your confusing what I said, which was based on there values, I had over $15000 wort ...

    Re: Pausing in Woodwop, HOPS, and Biesseworks
    A message posted at WOODWEB's CNC Forum (3/17) -- frank you use CID its very old format of biesse its cant read directly by the quote (must convert t ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- TB III will loose 70% of its strength at 160 degrees F. So if you used it, I would suspec ...

    can I ask for advice on buying a dependable 4wd truck to use in the woods
    A message posted at WOODWEB's Forestry Forum (3/17) -- I need a very dependable economical used 4x4 truck to do forestry work. It will be used on rut ...

    Re: Cabinet installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/17) -- Matt, Licensing gives the customer an opportunity to verify that the ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- joints are freshly prepped via our planer for edge grain and wide belt for the end grain ...

    Re: Does a tree build wood on the compression or tension side of the pith?
    A message posted at WOODWEB's Sawing and Drying Forum (3/17) -- In my experience, the tension wood, which only forms in hardwoods, is actually more t ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- leo, if i understand you correctly - you doubt we're putting too much pressure to it? wha ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- I would want to test the moisture in the wood. We test all material when is comes in. My ...

    Curing waterborne finishes
    A message posted at WOODWEB's Finishing Forum (3/17) -- We are a manufacturer of picture frames and moulding and are considering a Prime Heat UV curi ...

    Re: Cabinet installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/17) -- Just wondering Frank, how does licensing a contractor turn them from ...

    Re: Good airbrush for touchup with conversion varnish?
    A message posted at WOODWEB's Finishing Forum (3/17) -- just a side note on the tjr jr.... on finish systems.com in the econmy gun section you will f ...

    Wanted- shaper fence system
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Looking for a shaper fence system for running stile. I have a three headed woodtek shaper ...

    Re: Straight line Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- It is very difficult to maintain a tight tolerance on a rip off a SLR in my experi ...

    Re: Swirl Marks in Unfinished Wood
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- We just finished an alder kitchen that used a lacquer based dye. We had good luck sanding ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- We recently moved to a new building and installed new heat in the building. It got me res ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- I would look at the wood prep. I know that Dr. Gene Wengert ALWAYS says that the sawn or ...

    Re: CAD v. Vetrixc software?
    A message posted at WOODWEB's CAD Forum (3/17) -- CAD computer assisted design, is just that a design software there is also, CAM computer assisted m ...

    Re: Heavy vanity question
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Thank you for all your help. I ended up making the vanity out of poplar. Installer (not m ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- You sure somebody didn't drop it? You have breakage and cracks in the wood. That doesn't ...

    Re: Educating folks on Feeds N Speeds?
    A message posted at WOODWEB's CNC Forum (3/17) -- Use chipload to calculate speeds and feeds. We're running a 3 flute compression spiral in 5/8 and 3 ...

    Re: Educating folks on Feeds N Speeds?
    A message posted at WOODWEB's CNC Forum (3/17) -- Onsrud has good videos on you tube that go through the math and all the Vortex suggestions are in t ...

    Re: Tall oversized raised panels
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- I think you are setting yourself up for failure. 30" panels are going to move, a goo ...

    Re: Interior door veneer splitting
    A message posted at WOODWEB's Furniture Making Forum (3/17) -- I see you have a panel shrinkage issue as well. I had no idea you could get a home hum ...

    Re: Pausing in Woodwop, HOPS, and Biesseworks
    A message posted at WOODWEB's CNC Forum (3/17) -- You are creating a CID, I sent over the BSWorks created line format for a .bpp for suspension, let ...

    Re: Drawer box ideas
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- You're confusing the value of a drawer made to a size that is needed, versus a stack of p ...

    Re: Drawer box ideas
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- I am not sure weight wise how many make a ton, but I have about 2000 left, a company I no ...

    chainsaw milling
    A message posted at WOODWEB's Sawing and Drying Forum (3/17) -- If ripping a log, does the angle of attack at the end grain matter? Would a greater t ...

    Re: chainsaw milling
    A message posted at WOODWEB's Sawing and Drying Forum (3/17) -- It's the difference of sawdust vs curls off the cut. Square to end grain is by far th ...

    Re: Educating folks on Feeds N Speeds?
    A message posted at WOODWEB's CNC Forum (3/17) -- Call the tool maker and they will have a recommendation. Vortex will give you suggested RPM and fee ...

    Re: Tall oversized raised panels
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Quarter sawn wood only. Must have the same amount of finish on the back side of the panel ...

    Re: Drawer box ideas
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Post some of the sizes that you have the larger quantities of, someone may have a need fo ...

    Re: Pausing in Woodwop, HOPS, and Biesseworks
    A message posted at WOODWEB's CNC Forum (3/17) -- Frank, That syntax a Woodwop mpr file, the gcode is in the prg folder on a machine. A- ...

    Re: Corded Trim Saw
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- Those rockwells look awkward to use. You don't find it hard to scribe with it ...

    Re: Corded Trim Saw
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- No, they are right handed and can follow a smaller radius than a larger saw. ...

    Re: Pausing in Woodwop, HOPS, and Biesseworks
    A message posted at WOODWEB's CNC Forum (3/17) -- Frank, I inserted a NC stop in a mpr file, you can see the result A- ...

    Re: chainsaw milling
    A message posted at WOODWEB's Sawing and Drying Forum (3/17) -- Somehow, I imagine that curls suggest something more efficient and faster. ...

    Re: Dodds dovetail machine tooling.
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- They're available from Dodds, contact them ...

    Re: New Trends
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Here in South Carolina, this would still be news ! ...

    Re: Top drawer opening
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- 5" opening, 4" boxes on tandems. ...

    Re: Drawer box ideas
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- How many drawer boxes 1 ton? ...

    Re: New Trends
    A message posted at WOODWEB's Business and Management Forum (3/17) -- What's up with that? ...

    Re: Does wood thickness matter?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- I would say that thickness doesn't matter. Now, our esteemed Presidential can ...

    Re: Using tooling after a FIRE
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- So in this post you're asking for opinions please keep in mind that's only what I ...

    Re: Calif Sales Tax Audit
    A message posted at WOODWEB's Business and Management Forum (3/17) -- BG, Design labor is taxable when it is related to the sale of taxable material, ...

    Re: Krystal over resistant ?
    A message posted at WOODWEB's Finishing Forum (3/17) -- Sounds like Richard is having the same problems. I was faced with the same situation before. ...

    Cabnetware path help
    A message posted at WOODWEB's CNC Forum (3/17) -- We had a automatic update to windows 10 which caused us a lot of trouble. We had a computer person ...

    Re: Using tooling after a FIRE
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- I would have to agree with Russ, use the insurance if possible. Silver braze alloy ...

    Re: Krystal over resistant ?
    A message posted at WOODWEB's Finishing Forum (3/17) -- Hi Dan, I've been using MLC Resistant Pigmented top coating for long time now and have been h ...

    Re: Wide Belt Sander for finishing panels
    A message posted at WOODWEB's Finishing Forum (3/17) -- Chris you're absolutely right. The issue is that i'm from a small country in Europe and is ha ...

    Re: Accuspray Guns
    A message posted at WOODWEB's Finishing Forum (3/17) -- Hi Robert I have three PPS systems purchased at different times and they are not prejudice... ...

    Paying for Purchases from Machinery Exchange
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Looking for feedback and suggestions. I'm looking to purchase a machine listed ...

    Re: Krystal over resistant ?
    A message posted at WOODWEB's Finishing Forum (3/17) -- I gave up on Resistant and switched over to Stealth. Took a while to figure out how to get it ...

    72" Round table support structure
    A message posted at WOODWEB's Furniture Making Forum (3/17) -- I'm making a 72" round table with a tapered square center column out of solid che ...

    Blind dado
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- I often see posts where the contributor indicates the he doesn't "think" a blin ...

    Re: Wall Cabinet Weight - 3/4 Melamine
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- While I use 3/4" prefinished plywood now , I have built many MCP cabinets in the pas ...

    Re: Wall Cabinet Weight - 3/4 Melamine
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- That's not a lot of weight as long as you use proper installation screws and go into stud ...

    Re: Does wood thickness matter?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- So isn't the one liner making a comment against David piping in? Anyway, than ...

    Re: Good Article by Tim's brother
    A message posted at WOODWEB's Business and Management Forum (3/17) -- You would definitely be most interested in the needs of the end customer, the a ...

    Re: Accuspray Guns
    A message posted at WOODWEB's Finishing Forum (3/17) -- Hi Robert Well, computer inept.....can't post a picture. Go Cat's home page, there bottom lef ...

    Flamible storage Cabinets
    A message posted at WOODWEB's Finishing Forum (3/17) -- Helow everyone Looking for advice on where to buy "fire code" legal flamible storag ...

    Re: Using tooling after a FIRE
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- I agree with the past firefighter, although I have no idea what that is, nor what ...

    Re: Accuspray Guns
    A message posted at WOODWEB's Finishing Forum (3/17) -- Robert The leaks come from pressurized pps systems. It is like a miniature pressure pot. You ...

    Re: Accuspray Guns
    A message posted at WOODWEB's Finishing Forum (3/17) -- Jim, Interesting. I use the pps system on a Sata gun (gravity), Iwata (gravity) and realize t ...

    HSK63F spindle wiper
    A message posted at WOODWEB's CNC Forum (3/17) -- I have been buying the $70 plastic and felt spindle wipers. They get torn up pretty fast. We had a ...

    Re: SAC Planer rubber feed rollers
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Before you remove the snap ring, see if the 2 black handles can be turned. Could the feed ...

    Re: 72" Round table support structure
    A message posted at WOODWEB's Furniture Making Forum (3/17) -- I don't think any of them have a large enough foot print on the floor. The top will re ...

    Re: Krystal over resistant ?
    A message posted at WOODWEB's Finishing Forum (3/17) -- Dan - what problems are you having with the Resistant? It may be possible to work out the pro ...

    Re: Biesse Stream B1 [If you don't know what this is, don't bother opening.
    A message posted at WOODWEB's CNC Forum (3/17) -- For technical assistance for Biesse Equipment, please call 704-357-3131 and a service ticket will b ...

    Re: Wall Cabinet Weight - 3/4 Melamine
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Most of my cabinets are built with nailers in front of a stapled on (full overlay) 1/4&qu ...

    Re: Krystal over resistant ?
    A message posted at WOODWEB's Finishing Forum (3/17) -- Paul- just seams to get the odd fleck of contamination or just not as nice a finish. with the ...

    Re: Krystal over resistant ?
    A message posted at WOODWEB's Finishing Forum (3/17) -- Richard. I used the reducer and it helped and thinned it more. I usually only use the retarde ...

    Re: Adjustable Feet trial
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- I've been using the ones from Hardware Concepts for over 20 years and wouldn't do it any ...

    Re: Paying for Purchases from Machinery Exchange
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Go buy it in person and pay cash. Protection is your fist. ...

    Re: Krystal over resistant ?
    A message posted at WOODWEB's Finishing Forum (3/17) -- We often put a clear coat over our pigmented cv. Adds depth and makes touchups easier. ...

    Re: Does wood thickness matter?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- So you have no real answer but pipe up only to throw in politics. Nice. ...

    Re: Calif Sales Tax Audit
    A message posted at WOODWEB's Business and Management Forum (3/17) -- BG, This is one we proposed last week A- ...

    Re: Flamible storage Cabinets
    A message posted at WOODWEB's Finishing Forum (3/17) -- Should read "hello"......sorry... ...

    Re: Wall Cabinet Weight - 3/4 Melamine
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Thanks for your thoughts! ...

    Re: Best Scale for Color Matching
    A message posted at WOODWEB's Finishing Forum (3/17) -- Fillon tech makes excellent scales. ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- David, I often use the sliding saw as a straight lining method with a ripping shoe ...

    Re: Clumsy beginnings, clumsy growth spurts.
    A message posted at WOODWEB's Business and Management Forum (3/17) -- If I recall correctly, Paul D has a desk with "Luck favors the prepared&qu ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- "The workpiece is wedged under the shoe and held down by hand or clamped at t ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- David, you are certainly right to say that a straightline rip saw is more producti ...

    Re: Kremlin for home user
    A message posted at WOODWEB's Finishing Forum (3/17) -- I've never seen anyone spray a door in that pattern? Also would not be thrilled with the blot ...

    Re: Clumsy beginnings, clumsy growth spurts.
    A message posted at WOODWEB's Business and Management Forum (3/17) -- David, this divorce situation description has created an image in my head that ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- While the dimension saw can be used to straight line lumber I don't find it ideal ...

    Re: water based stain
    A message posted at WOODWEB's Finishing Forum (3/17) -- Yep, this is still the weak link in trying to go all waterbased. Trying to wipe a large, comp ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- Phil, after reading one of your earlier posts regarding typical British shop equip ...

    Re: Kremlin for home user
    A message posted at WOODWEB's Finishing Forum (3/17) -- Pot and gun will be more versatile, giving you more control then a pump when performing other ...

    Re: will it work (repair question)?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- tom - our process is similar to dave's. dave - glue starvation might the be a ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- The terminology difference is interesting. Mathematically a plane is a smooth surf ...

    Re: What bit do you use?
    A message posted at WOODWEB's CNC Forum (3/17) -- 3/8" compression from Onsurd. Their Marathon bits are generally very long lived but they have ...

    Re: Cracking on 6" walnut post glue-ups
    A message posted at WOODWEB's Adhesives Forum (3/17) -- Had big time trouble with white oak table pedestal at the beginning of my career. That's when ...

    Re: Help! Looking Owner Manual Lobo CS-4045M
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- Good luck. I will never buy another Lobo machine. We bought a lineal profile sande ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- "While the dimension saw..." I'm guessing that is a UK term for a table ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- "why take the risk when within a dozen steps ...are a sliding table saw? ...c ...

    Re: Waste Management
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Our dust collector is hooked up to a bin outside where all the dust gets dumped ...

    What bit do you use?
    A message posted at WOODWEB's CNC Forum (3/17) -- I am looking into using edge banding on some of my products instead of t-mold. I notice that severa ...

    Re: water based stain
    A message posted at WOODWEB's Finishing Forum (3/17) -- It is a shame the ICA CNA stains were never able to establish a foothold in the states. They ...

    Re: Waste Management
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Mel -- Yes they accept all types of saw dust, depending on the type and mixture ...

    Re: Steam bending Ipe
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- No need for carbon if the tannin content is high enough it will turn the wood ...

    Re: Drying Black Spruce
    A message posted at WOODWEB's Sawing and Drying Forum (3/17) -- Hi Jeff, Have you checked www.fpl.fs.fed.us/documnts/fplgtr/fplgtr57.pdf Check schedu ...

    Re: Clumsy beginnings, clumsy growth spurts.
    A message posted at WOODWEB's Business and Management Forum (3/17) -- "Opportunity is missed by most people because it is dressed in overalls an ...

    Re: Clumsy beginnings, clumsy growth spurts.
    A message posted at WOODWEB's Business and Management Forum (3/17) -- I got started buy making some simple wooden toys for my sisters little kids, lo ...

    kavara controler scm
    A message posted at WOODWEB's CNC Forum (3/17) -- Need a tech to install or trouble shoot a software problem on a kavara controller on tech99 scm Con ...

    Re: Waste Management
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Samuel--do the pellet making folks accept mdf/ply dust or just hardwood? Also, ...

    Re: Kremlin for home user
    A message posted at WOODWEB's Finishing Forum (3/17) -- If somebody did that to my oak doors I'd shoot em. That is a conventional airless in the vide ...

    Re: will it work (repair question)?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- We did a huge tavern bar top several years ago. Now you've got me wondering a ...

    Re: old sears radial arm saw
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- if you don't get an answer here check out Woodnet... http://www.forums.woodnet.net/ubbthr ...

    Re: What bit do you use?
    A message posted at WOODWEB's CNC Forum (3/17) -- 3/8" diameter three flute mortise compression for 3/4" particle core. Have not used premi ...

    Drying Black Spruce
    A message posted at WOODWEB's Sawing and Drying Forum (3/17) -- I am looking for information about drying Black Spruce...What would be a typical dryi ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- Sorry, by dimension saw I mean sliding saw, in England the jointer is the planer a ...

    Re: will it work (repair question)?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- Is ripping on site with a track saw an option for you? I'd love to see a phot ...

    Re: Clumsy beginnings, clumsy growth spurts.
    A message posted at WOODWEB's Business and Management Forum (3/17) -- Paul, you say lucky, I doubt that. I say the harder I work, the luckier I get.. ...

    Re: Steam bending Ipe
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- "Must have high tannin content". That and you had carbon steel in c ...

    Re: Drying & Shrinking of 1/4 inch Veneer
    A message posted at WOODWEB's Sawing and Drying Forum (3/17) -- Maybe 11 down. It starts " wood movement..." ...

    Re: Varnish
    A message posted at WOODWEB's Finishing Forum (3/17) -- Why? Just use Abralon or steel wool to cut the sheen. ...

    Re: Steam bending Ipe
    A message posted at WOODWEB's Architectural Woodworking Forum (3/17) -- Must have high tannin content. ...

    Re: old sears radial arm saw
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- Like this... ...

    Re: Cabinetvision screen to machine
    A message posted at WOODWEB's CAD Forum (3/17) -- Les- I see your point, but then again, I contacted you and your sales representative and wanted me ...

    Re: Cabinetvision screen to machine
    A message posted at WOODWEB's CAD Forum (3/17) -- Les is correct in that I need to zero in on those who are using CV in a workcell setup. That was pa ...

    Re: Cabinetvision screen to machine
    A message posted at WOODWEB's CAD Forum (3/17) -- @ cabinetmaker - I didn't say that Cabinet Vision's saw/ptp links don't work. I was making the poin ...

    Re: Cabinetvision screen to machine
    A message posted at WOODWEB's CAD Forum (3/17) -- Cabnetware/Cabnetvision and STM will post flawlessly to a saw and PTP. With the Holzma there are a ...

    Re: Installing over wood paneling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/17) -- I would treat it just like drywall over studs assuming the T&G is ...

    Matching semi-custom cabinet painted finish
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/17) -- I need to match a back panel to Schuler Morel Vintage finish. It has ...

    Re: Cabinetvision screen to machine
    A message posted at WOODWEB's CAD Forum (3/17) -- I think you'll note that the responses you received focused on using CV S2M using nesting and a rou ...

    Re: Installing over wood paneling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/17) -- You're not overthinking anything. Those panels are certainly going to ...

    cad/cam
    A message posted at WOODWEB's CAD Forum (3/17) -- we are using Mastercam as our cad/cam software right now. there service seems to be lacking lately ...

    Re: Installing over wood paneling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/17) -- Chuck - the studs won't care , but the door reveals and drawer alignm ...

    Re: Installing over wood paneling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/17) -- ^^^^^ That's not practical for the base cabinets ! ...

    Re: Installing over wood paneling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/17) -- oversize clearance holes through the paneling... ...

    Re: what's the best wood near ocean
    A message posted at WOODWEB's Sawing and Drying Forum (3/17) -- In response to your title, I was going to say Beech! ...

    Re: Installing over wood paneling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/17) -- Could hang them on French cleats. ...

    Re: small mill viabillity
    A message posted at WOODWEB's Value Added Wood Processing Forum (3/17) -- Hi Steve, I would love a copy of your book and just sent you email message ...

    Re: Door & Window Screen to Machine Design Software Recommendations
    A message posted at WOODWEB's CAD Forum (2/17/25) -- Hi Jeff, It's great to hear that you're looking to upgrade your design process. For parametric d ...

    Re: Cabnetware along with Cabinetvision
    A message posted at WOODWEB's CAD Forum (2/17/25) -- Hi, It sounds like you're dealing with a compatibility issue between CabinetVision, Cabnetware, ...

    Re: Alphacam
    A message posted at WOODWEB's CAD Forum (2/17/25) -- To transfer Alphacam from your old PC to the new one, you’ll first need to check the software's ...

    Re: 1991 Altendorf Panel Saw Slider - Alignment procedure sequence help
    A message posted at WOODWEB's Cabinetmaking Forum (2/17/25) -- Before going too far into the alignment check the condition of the phenolic strips wit ...

    Re: biesse
    A message posted at WOODWEB's CNC Forum (2/17/25) -- Going into diagnosis (#8) on main menu. Go to “Port List”. G10 and G11 are the polarity commands ...

    Re: 2nd CNC
    A message posted at WOODWEB's CNC Forum (2/17/25) -- I'd be inclined to run one machine. How big is your drill block? Do you have auto load and unloa ...

    Epoxy for Solid Surface
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/17/25) -- What type of epoxy should I seek out for bonding Wilsonart solid surf ...

    Re: 1991 Altendorf Panel Saw Slider - Alignment procedure sequence help
    A message posted at WOODWEB's Cabinetmaking Forum (2/17/25) -- I think the phenolic strips are alright as the cuts are quite good. I am really just f ...

    Re: biesse
    A message posted at WOODWEB's CNC Forum (2/17/25) -- How are you all? I had a problem with a 2014 Biesse Rover, when the machine was changing the too ...

    Re: biesse rover a or k
    A message posted at WOODWEB's CNC Forum (2/17/24) -- Biesse used to have the best tech support. Not anymore, I have friends who have been down and wa ...

    Re: Dark Burl Banquette and Table
    A message posted at WOODWEB's Furniture Making Forum (2/17/24) -- I would tell the client to veneer the table top in burl and do the banquet seat in ...

    Learning
    A message posted at WOODWEB's Furniture Making Forum (2/17/24) -- This is me learning. Every time I step foot into one of your shops, I learn an incr ...

    Re: ICA Polyurethanes
    A message posted at WOODWEB's Finishing Forum (2/17/24) -- bob is super knowledgeable, but ica is a pain to deal with, no pds on website, in fact the ...

    Re: SEALING 1 3/4" DOOR EDGES
    A message posted at WOODWEB's Finishing Forum (2/17/24) -- shellac is not a good moisture barrier, there is no need to use it, except to seal in fish ...

    Re: Dark Burl Banquette and Table
    A message posted at WOODWEB's Furniture Making Forum (2/17/24) -- Thank you Pete! Exactly the support I needed. ...

    Re: Replacing small tools
    A message posted at WOODWEB's Cabinetmaking Forum (2/17/23) -- There are a lot of Panasonic memories on here. I used to own a 15.6v & 12v back in ...

    Re: Sanding for stain or paintable products.
    A message posted at WOODWEB's Finishing Forum (2/17/23) -- Paint grade we sand with 150. Stain grade we sand with 180. We use Indasha sandpaper. Befo ...

    Re: Sanding for stain or paintable products.
    A message posted at WOODWEB's Finishing Forum (2/17/23) -- I'm with the FM on this one, we have a very limited finishing area probably in the 400sq r ...

    Re: Replacing small tools
    A message posted at WOODWEB's Cabinetmaking Forum (2/17/23) -- No hook in the lip for Festool here. Not a fan. Milwaukee would be my go-to at this po ...

    Touchscreen shop computer
    A message posted at WOODWEB's Cabinetmaking Forum (2/17/23) -- What is everyone using for a touchscreen computer or tablet in the wood shop? We are h ...

    Re: For those who really know widebelts
    A message posted at WOODWEB's Solid Wood Machining Forum (2/17/23) -- Have you tried gluing an old sanding belt to a piece of plywood and dressing th ...

    Re: Full overlay pocket door hardware for cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (2/17/23) -- I have not come across a hinge that would work with that overlap. Accuride is mostly w ...

    Re: Sanding for stain or paintable products.
    A message posted at WOODWEB's Finishing Forum (2/17/23) -- After re-reading for the 4th time I finally picked up on the 'pigmented sealer' part in th ...

    Clear over magnamax pimented precat
    A message posted at WOODWEB's Finishing Forum (2/17/23) -- I’d like to give my customer some extra protection in the kitchen areas. I was wondering i ...

    Re: Replacing small tools
    A message posted at WOODWEB's Cabinetmaking Forum (2/17/23) -- surprised nobody mentioned festool. They have some very nice tools out there. are they ...

    Re: Touchscreen shop computer
    A message posted at WOODWEB's Cabinetmaking Forum (2/17/23) -- We have Tablets out in production. Mount them, then they will last. ...

    Re: Clear over magnamax pimented precat
    A message posted at WOODWEB's Finishing Forum (2/17/23) -- If you want more protection use a post cat to begin with. ...

    Re: Clear over magnamax pimented precat
    A message posted at WOODWEB's Finishing Forum (2/17/23) -- Done that! Simple answer Magnaklear! ...

    Re: interior Custom Shutters
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17/22) -- David, Come on man join the 21st century. Years ago the only good wheels w ...

    Re: duct size vs machine hood size
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/17/22) -- I agree with Bill regarding the size of the fitting the manufa ...

    Re: Putting cornice on lath and plaster walls.
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17/22) -- I'd be inclined to attached horizontal plywood strips to the top of wall f ...

    Conversion varnish specks
    A message posted at WOODWEB's Finishing Forum (2/17/22) -- We have sprayed atleast 100 gallons of sherwin Williams kemvar plus. Mostly white, but qui ...

    Re: Cabinet door panels
    A message posted at WOODWEB's CNC Forum (2/17/22) -- Im in the 5 piece camp and will likely never go to one piece MDF doors but Im not chasing the ho ...

    Outsourcing closet fabrication
    A message posted at WOODWEB's Cabinetmaking Forum (2/17/22) -- Hi folks, Custom cabinetmaker that mainly focuses on entryways, mudrooms, and custom c ...

    Re: duct size vs machine hood size
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/17/22) -- Hello, and thank you for the replies. I should have included f ...

    Re: Outsourcing closet fabrication
    A message posted at WOODWEB's Cabinetmaking Forum (2/17/22) -- Hey James, We tried doing this sort of thing, however we found it was simply not of va ...

    Re: Checking in mahogany crotch tables
    A message posted at WOODWEB's Veneer Forum (2/17/22) -- Nice work. Thanks for the suggestion for the pinless meter, I wasn't aware that was what to u ...

    Re: Help with a Graco AAA
    A message posted at WOODWEB's Finishing Forum (2/17/22) -- Update on the pump condition So I took it back to Sherwin Williams where I got it from It' ...

    Re: Outsourcing closet fabrication
    A message posted at WOODWEB's Cabinetmaking Forum (2/17/22) -- That's good feedback and what my intuition tells me is the route to go. The main advan ...

    Where to get 20HP blower?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/17/22) -- I am looking for a stand alone 20HP blower either with or with ...

    Re: Concealed fastener for steel to wood connection
    A message posted at WOODWEB's Cabinetmaking Forum (2/17/22) -- Thanks Jim, I spoke with star which is where the recommendation fror the glide came fr ...

    Re: What is the maximum size of a frame and panel door to join it with cope
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17/22) -- Inlaying 3/8" steel plates across the joint will hold better than a l ...

    Re: MLC vs Lenmar
    A message posted at WOODWEB's Finishing Forum (2/17/22) -- I've used a few gallons of Lenmar Duralaq WB, both clear and white. Both sprayed great and ...

    Re: duct size vs machine hood size
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/17/22) -- You should talk to American fabric filter. They did upgraded f ...

    Re: What is the maximum size of a frame and panel door to join it with cope
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17/22) -- Between poor machining tolerances and non round dowels there is an interfe ...

    Re: Conversion varnish specks
    A message posted at WOODWEB's Finishing Forum (2/17/22) -- We are spraying with an a Apollo turbine and cup gun, so there is no fluid line to clean u ...

    Re: Color matching with various stains
    A message posted at WOODWEB's Finishing Forum (2/17/22) -- Get the book "Blue and Yellow Don't Make Green". After you read it, you'll have ...

    Re: Cabinet door panels
    A message posted at WOODWEB's CNC Forum (2/17/22) -- Thanks for all the input everyone. Richard, Do you have a picture or a cross section of the two ...

    Re: Concealed fastener for steel to wood connection
    A message posted at WOODWEB's Cabinetmaking Forum (2/17/22) -- Try Kip Porter (803)-250-9608 ...

    Re: Furniture Stripping
    A message posted at WOODWEB's Finishing Forum (2/17/22) -- It may be a dye that penetrated into the raw wood ? ...

    Re: Where to get 20HP blower?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/17/22) -- Ebay has some. ...

    Re: Conversion varnish specks
    A message posted at WOODWEB's Finishing Forum (2/17/22) -- Replace your fluid line. ...

    Re: Furniture Stripping
    A message posted at WOODWEB's Finishing Forum (2/17/22) -- be easier to make a new top ...

    Re: Purchasing doors online
    A message posted at WOODWEB's Cabinetmaking Forum (2/17/22) -- try walzcraft. ...

    Re: Curved benches
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- Thanks Adam Because of the scale of the job both the corten steel and stainle ...

    Re: Cabnetware software
    A message posted at WOODWEB's Business and Management Forum (2/17) -- Fedi I have been a cabnetware user since it came out on DOS ! Retired it- Been ...

    using a handheld veneer stitcher
    A message posted at WOODWEB's Veneer Forum (2/17) -- So we just got one of the Kuper handheld stitchers and are trying it out. I've seen some videos ...

    Re: I have admire the work on this car
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- I too really admire the handwork that went into those wooden framed autos. Si ...

    Cabnetware software
    A message posted at WOODWEB's Business and Management Forum (2/17) -- Gentlemen, I have a very old version of Cabnetware, 4.3, probably from the late ...

    Re: Curved benches
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- Ideally you can flatten out the parts or Slice it in 3-5 axis software so you ...

    Re: Need part for our CNC urgently
    A message posted at WOODWEB's CNC Forum (2/17) -- FWIW see if Morbidelli will put the part on an airplane. Just about every passenger flight is carry ...

    Need part for our CNC urgently
    A message posted at WOODWEB's CNC Forum (2/17) -- We need an XCM2102L2 X-axis limit switch for our Morbidelli CNC router. We are down without it and ...

    Re: minimum dimension for roundwood structural timber
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- We own a James Taylor 80 segment clasp transporter and this is authorized in ...

    Re: I have admire the work on this car
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- We own a James Taylor 80 segment clasp transporter and this is authorized in ...

    Re: MDF Doors on CNC
    A message posted at WOODWEB's CNC Forum (2/17) -- Whiteside basically created the MDF (You should be using HDF) door profiles. if you are selling a q ...

    Re: Need part for our CNC urgently
    A message posted at WOODWEB's CNC Forum (2/17) -- Get a machine electrician. He will quickly diagnose the type of switch, normally open/normally clos ...

    Re: Need part for our CNC urgently
    A message posted at WOODWEB's CNC Forum (2/17) -- Seems crazy for a limit switch. Post a pic. Likely a OEM number for something off the shelf. If you ...

    Re: Cabnetware software
    A message posted at WOODWEB's Business and Management Forum (2/17) -- Maybe you should just get another computer for placing orders. I have an old Ma ...

    Re: coping sled
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Extrema sells one. Grizzly has one in their catalog too. I have the Extrema. Well made an ...

    Re: MDF Doors on CNC
    A message posted at WOODWEB's CNC Forum (2/17) -- We can help with that. We also have the 1/8 bit used to clean up the corners ...

    Re: Need part for our CNC urgently
    A message posted at WOODWEB's CNC Forum (2/17) -- Dropout x2. Exactly what I was thinking. BH ...

    I have admire the work on this car
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- This is amazing ...

    Re: Annual merit raises, etc
    A message posted at WOODWEB's Business and Management Forum (2/17) -- Keep in mind EVERYONE ELSE who is getting paid through your jobs (i.e. - suppli ...

    Re: Hand Hewn Fronts
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- No arguments from me Tony. I dont honestly see how anyone could cost effectiv ...

    Re: resource for basic shaper speed/feed info?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/17) -- I have found that everyone professionally engaged with the design, engineering and ...

    Re: PVC Edge Tape thickness for Corner Rounding function
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Thanks Harold! I am going to buy an automatic edge banding machine with 8 functions in Ch ...

    Re: Job Names, avoiding confusion and overcomplexity
    A message posted at WOODWEB's Business and Management Forum (2/17) -- Format is fluid based on tracking necessity, but once you decide on what you'd ...

    Re: PVC Edge Tape thickness for Corner Rounding function
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- I bought the Chinese saw from a distributer in Miami. When I needed some parts , I couldn ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/17) -- Okay Jeff, what is a reactive polyurethane? I imagine it is the glue that gives you a black h ...

    Holzma Hinge Borer
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Wondering if any of you guys have ever used or know of a Holzma hinge borer? I just picke ...

    Re: PVC Edge Tape thickness for Corner Rounding function
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- I live in South East Asia and there are only about 2 stores that sells these kind of mach ...

    Re: Power feeder belt feed conversion
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Last time i dealt with Weaver i bought a shaper cutter after they called me for about 8 w ...

    Re: AirVantage Sander? Mirka? ROS Upgrade
    A message posted at WOODWEB's Furniture Making Forum (2/17) -- If you are looking to sand and I mean Sand but not use it to shape a surface then the ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/17) -- Right you are! It will give you the dreaded black hand. CP carries both the PUR (CP-0701) and ...

    Re: CV to selfseal or not to (sealer)
    A message posted at WOODWEB's Finishing Forum (2/17) -- The article was written at a time that lacquer was still super popular, and conversion varnis ...

    Re: Holzma Hinge Borer
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- I would start with the switch at the foot pedal. Most likely it is a normally open switch ...

    Re: Router cutting wrong segment of circle - Microvellum single part editor
    A message posted at WOODWEB's CAD Forum (2/17) -- A couple of years ago I had issues with cutting arcs, long story short I opened a trouble ticket an ...

    Re: Backsplash caulking pulling away from countertop
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (2/17) -- We use silicone on the bottom face of the backsplash and small dabs t ...

    Re: PVC Edge Tape thickness for Corner Rounding function
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Glad I inspired you! You should have mentioned you were in Asia at the beggining. In that ...

    Re: Holzma Hinge Borer
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- I am guessing that is a well made machine and that cleaning the contacts on the foot swit ...

    Re: Plywood quality
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- I chased Columbia Pure Bond from vendor to vendor for over a decade. Then I w ...

    Re: Topcoating over an Oil Based Primer
    A message posted at WOODWEB's Finishing Forum (2/17) -- You could try a barrier coat, Chemcrafts aquaprime is MIGHT work here, its a WB primer that s ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/17) -- Thank you for the replies. Sapele seems to have a lot of oil in it. When I burn rippings, the ...

    Re: Power feeder belt feed conversion
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Try Weaver shaper. I think they make up loops in custom lengths. I got mine from them 15 ...

    Re: Pull out plastic totes/bins?
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Think outside of the box. Any dish tub with a top lip will accomplish what you are trying ...

    Re: Measuring Wood Whiteness
    A message posted at WOODWEB's Sawing and Drying Forum (2/17) -- As I know of, spectrophotometers are the only tools you can use to determine whitenes ...

    Re: Backsplash
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (2/17) -- Looks like a Chemetal Laminate. We Have used this before but just for ...

    Re: Corian Sinks
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/17) -- This may help https://betterleytools.com/content/betterley_catalog.pdf ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/17) -- No one said anything, but the panels are 5/8" thick, not 58" thick. ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/17) -- Here’s a blast from the past &#128513; ...

    Re: Plywood quality
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- Thank you all for your replies. ...

    Re: Need to get into the 21st century CAD
    A message posted at WOODWEB's CAD Forum (2/17) -- In all the reading Ive seen on the subject when your trying to come in rather quickly and dont have ...

    Correct definition for dust release
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/17) -- I'm a big fan of American Filter Fabric custom dust collection fi ...

    Re: How old is your CNC
    A message posted at WOODWEB's CNC Forum (2/17) -- Hmm.. I guess I win.. 1977 Porter Little Guy. It was bought used in 90's .small table we use it mai ...

    Biesse Edge bander
    A message posted at WOODWEB's WOODnetWORK Forum (2/17) -- Hi all. I have just got a new Biesse Stream A edgbander equipped with the hybrid glue pot a ...

    Holzher edgebander 1435 - OFL - OPEN INP - Error
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Does anyone have any experience with Holzher 1435 SE Genesis edgebander? Recently the err ...

    latex paint drips on my vanity cabinet door
    A message posted at WOODWEB's Finishing Forum (2/17) -- The painter got a couple of drips on the new vanity we installed what is the best way to remo ...

    Re: Chemcraft Aqualux
    A message posted at WOODWEB's Finishing Forum (2/17) -- Going down another path.... Did you happen to change sandpaper? I once blamed the finish and ...

    Re: Cabinet Vision MDF door sectioning
    A message posted at WOODWEB's CAD Forum (2/17) -- do you mean something like that? like 2 types of front on one door ,that "look like" door ...

    Re: Correct definition for dust release
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/17) -- I always heard of it called dust cake, but I've been wrong before ...

    Front door
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- Greetings all, I’m heading to a customer’s home to discuss a new front door o ...

    Economy Cabinet Doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Anyone know of an extreme down and dirty economy grade door (or company that offers them) ...

    Cost-effective CNC melamine drawer boxes?
    A message posted at WOODWEB's CNC Forum (2/17) -- I posted the same thing at the cabinetmaking forum but am cross-posting here for maybe better repli ...

    Re: DIY kitchen cabinet making advice
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Hello All, Well, there is nothing at all practical about this little adventure, and if he ...

    Re: DIY kitchen cabinet making advice
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Get a kreg jig, S3S lumber for frames, prefinished plywood for boxes and you can build a ...

    Re: How to make stains with 824 utc
    A message posted at WOODWEB's Finishing Forum (2/17) -- Jim, many guys will use and I have also just Min Spirits or VM&P if I want it fast. I hav ...

    Re: Power feeder
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- If its that nasty I would either crack it open and rinse it out with brake cleaner and pu ...

    Re: Recomendation on Sander + Wirebrush Machine (mid-size prodduction floor
    A message posted at WOODWEB's Finishing Forum (2/17) -- Dustin, It looks like a nice machine. Can you go to a dealer and run boards and see what it c ...

    Re: Using air dried wood and warping
    A message posted at WOODWEB's Furniture Making Forum (2/17) -- There is no doubt that properly air dried lumber is better behaved than poorly kiln dr ...

    Cost-effective CNC melamine drawer boxes?
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- How cost-effective can my design be, which involves blind-dado fronts and backs, full dad ...

    Re: Economy Cabinet Doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- That has been my tact as well. We have just avoided it like the plague. That said, with t ...

    Re: Economy Cabinet Doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Mark, Sorry, wan't sure of your capabilities. We are with you on the econo market. We jus ...

    Re: Economy Cabinet Doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Thanks Robb, We've got the MDF doors covered on the CNC. The bulk of the requests we are ...

    Table base
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- I have a table base to make. The table top will be 8'x8' (huge). The base mus ...

    Re: DIY kitchen cabinet making advice
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Hello Rich, You're right that sheets of plywood are a bit more of a challenge at our age, ...

    Re: cnc breakdown
    A message posted at WOODWEB's CNC Forum (2/17) -- softwrap limit - that switch comes from a number of circuits with retraction/erection of tool chang ...

    Re: What Wood Species is this
    A message posted at WOODWEB's Sawing and Drying Forum (2/17) -- I thought of elm too but I have only worked with „Slippery“ elm before and this did n ...

    Re: Cost-effective CNC melamine drawer boxes?
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Only suggestion I can make is forget the grrove for the bottom on the CNC. Just set up a ...

    How to make stains with 824 utc
    A message posted at WOODWEB's Finishing Forum (2/17) -- So often my purchased stain matches are not right and was really waste much time. Help me wit ...

    Re: DIY kitchen cabinet making advice
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- By the way, I've ordered copies of Danny Proulx's and Jere Cary's books. I like Cary's fo ...

    Re: Crown support blocks
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Great idea. I always just use a strip of wood the width of my reveal between door tops an ...

    Re: Power feeder
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- good advice I am just afraid without a drawing I could pull it apart and some spring load ...

    Re: Economy Cabinet Doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- We can provide a one piece mdf door routed in shaker or rail and stile raised panel for $ ...

    Edgebander
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/17) -- I’m thinking of purchasing a makwisa glue pot edgebander has anyo ...

    Re: Outboard Fence
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- Give this a look. I think I've got about $600 in parts, and a bunch of hours ...

    Makwisa edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Has anyone purchased or know anything about these.glue pot makwisa edgebander Info is lim ...

    Re: Cost-effective CNC melamine drawer boxes?
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- I'd think a dowel drawer would be just as strong and faster to make. ...

    Re: DIY kitchen cabinet making advice
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- You guys are sure going to have fun slinging sheets of plywood! Good luck! ...

    Re: Beam saw vs flat table
    A message posted at WOODWEB's CNC Forum (2/17) -- and what about the cutting yield how can a router with a 1.2 cm bit go vs a 4 mm blade ?? ...

    Re: Table base
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- Base better be made out of steel plate and anchored to the floor. ...

    Re: Table base
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- Show a drawing ...

    Re: First Big Wall-art: it cupped...
    A message posted at WOODWEB's Finishing Forum (2/17) -- No such thing as working with wood and not "having to learn something". I've been d ...

    Re: Stains
    A message posted at WOODWEB's Finishing Forum (2/17) -- There are no samples like the Triclad system. You match the colors yourself. Once you have se ...

    Re: P2-10
    A message posted at WOODWEB's Adhesives Forum (2/17) -- I use it for a whole host of things. One of them is gluing sub counters in the shop. I can ea ...

    Re: Stains
    A message posted at WOODWEB's Finishing Forum (2/17) -- I agree with Kevin. BAC is not your friend. I like the D59 line because it is very versatile ...

    Re: Wood Finishing work
    A message posted at WOODWEB's Finishing Forum (2/17) -- It really doesn't work that way, and it takes a lot of time to build a reputation. Most if no ...

    Re: Metal Detector For Staples!
    A message posted at WOODWEB's Solid Wood Machining Forum (2/17) -- It is true that carbide does not have as sharp of a cutting edge as HSS. For many ...

    Re: Pivot Door Latching?
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- Thanks, Phil. That may be just what we need. I actually used one of their mor ...

    Reclaimed wood type and value?
    A message posted at WOODWEB's Sawing and Drying Forum (2/17) -- A builder friend of mine is demolishing a 100 year old bungalow sheathed with what he ...

    Re: First Big Wall-art: it cupped...
    A message posted at WOODWEB's Finishing Forum (2/17) -- I've had things change shape during the finishing process where one side was covered and the ...

    Pre-Painted Doors
    A message posted at WOODWEB's Finishing Forum (2/17) -- In an effort to cut down on my finish time, I am thinking about ordering my 5-piece doors pre ...

    Re: Pressure Pot to spray waterborne finishes?
    A message posted at WOODWEB's Finishing Forum (2/17) -- Pressure pot vs qt cup gun wins every time. Make sure that the pressure pot you get is deep e ...

    Re: Cabinetpro
    A message posted at WOODWEB's CAD Forum (2/17) -- Mike i only want to answer about yours coment about the 5 picess door first its can create by cnc n ...

    Re: Wire Brush Finish
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- In the last 6 months we have had many jobs with this kind of finish. Up until ...

    Re: Pressure Pot to spray waterborne finishes?
    A message posted at WOODWEB's Finishing Forum (2/17) -- I too do little spray work with ONLY waterborne prods ! Pressure pot is a good option for lit ...

    Re: First Big Wall-art: it cupped...
    A message posted at WOODWEB's Finishing Forum (2/17) -- I am not going to add anything about the warping beyond that the side with the longest contin ...

    Weinig P700
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- Is there anyone out there running a Weinig 6 head moulder that can tell me wh ...

    Re: Stains
    A message posted at WOODWEB's Finishing Forum (2/17) -- I will have to look into the d59 series. I would like a in house matching system. I was alway ...

    Re: Cure time for waterborne finishes
    A message posted at WOODWEB's Finishing Forum (2/17) -- Thanks for the responses. I ordered a wet film gauge because honestly I never measured that. ...

    Re: Stains
    A message posted at WOODWEB's Finishing Forum (2/17) -- I have been using the BAC wiping stain. Anytime I get one it seams way to much like paint ins ...

    Re: Wire Brush Finish
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- Looking for a weathered look,, a wire wheel may not do this,, we used a small ...

    Re: Pivot Door Latching?
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- I don't have any experience with magnetic latches, but you might consider an ...

    Re: Weinig P700
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- Why are you asking? You want to run it at a lessor amperage? I don't suggest ...

    Re: Metal Detector For Staples!
    A message posted at WOODWEB's Solid Wood Machining Forum (2/17) -- David, I've heard carbide knives aren't as sharp as regular steel knives, and ther ...

    looking for a putty with mim shrieking
    A message posted at WOODWEB's Finishing Forum (2/17) -- not wanting to mix any 2 part type of putty just looking for a putty with good adhesion and a ...

    Re: Cabinetpro
    A message posted at WOODWEB's CAD Forum (2/17) -- yaakov katz: The question about 5 piece doors was "do I make them on the cnc", my answer ...

    Re: Wire Brush Finish
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- We fasteners and others have always offered wire and nylon abrasive brushes w ...

    Re: Metal Detector For Staples!
    A message posted at WOODWEB's Solid Wood Machining Forum (2/17) -- Do you have a link for those DGK knives? When I google it all I see is Dirty Ghett ...

    Re: Wire Brush Finish
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- Mark, Who makes a brush stack. The shaper we would use has a 1 1/4" x 7& ...

    Re: Stains
    A message posted at WOODWEB's Finishing Forum (2/17) -- Yeah,,, get away from the BAC.. Blend-A-Color is very bland. Ask about the D59 solvent based ...

    Re: Stains
    A message posted at WOODWEB's Finishing Forum (2/17) -- What specifically are you not liking about the Sherwin williams? Are you using the D59 line? ...

    Re: Why didn't this work. Elliptical routing
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- Very informative Keith, nicely done! ...

    Re: Pay employee per piece
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Mike, I build shutters not cabinets, but I believe it may be possible to pay by the piece ...

    Re: I was right all along. Woodworking shop owner=%20lack of education+ horri
    A message posted at WOODWEB's Business and Management Forum (2/17) -- Seems like the formula would make more sense, Woodworking shop owner+lack of ed ...

    Re: How would you make these doors?
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- 12/4 Rift Oak to make stiles? All due respect, but I don't know if I have eve ...

    Complete Beginner Needs Cabinet/Furniture Help
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Hi, First post. I have built a 50' x 25' catamaran from vacuum resin infused epoxy/corece ...

    Re: How would you make these doors?
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- Yup, Dave is right on, not to mention the fact that quartered rift white oak ...

    Re: Crossroads
    A message posted at WOODWEB's Business and Management Forum (2/17) -- I think you need to prepare for circumstances to change for the worse, and out ...

    Re: Drying 5/4 White Oak, TDAL won't equalize
    A message posted at WOODWEB's Sawing and Drying Forum (2/17) -- The front probe is above the fan deck in front of the fan and the back probe is about ...

    Re: Crossroads
    A message posted at WOODWEB's Business and Management Forum (2/17) -- It sounds like the most important question you first need to answer is where yo ...

    Re: Macasser ebony
    A message posted at WOODWEB's Furniture Making Forum (2/17) -- I've never built anything as large as a chair out of ebony but I do cut quite a bit of ...

    Pay employee per piece
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- I have been round and round about employee pay rates. We currently pay per hour and for t ...

    Re: Crossroads
    A message posted at WOODWEB's Business and Management Forum (2/17) -- I'm 63 and retired. Selling some artistic woodturning to keep myself busy. Also ...

    Re: Macasser ebony
    A message posted at WOODWEB's Furniture Making Forum (2/17) -- Danger, Danger, Will Robinson! When you said "Ruhlmann" you set off a warnin ...

    Re: Crossroads
    A message posted at WOODWEB's Business and Management Forum (2/17) -- Have you asked your employee about the situation? Do you have a relationship wi ...

    Re: DXF to cnc
    A message posted at WOODWEB's CAD Forum (2/17) -- Sorry, late to the party....... The problem with most cam software and Sketchup is that most cam so ...

    Re: Bubbles in paint finish
    A message posted at WOODWEB's Finishing Forum (2/17) -- Bob - the picture only shows craters. Here's a few questions to help narrow the cause; Did th ...

    wormy white oak
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- I have a customer requesting wormy white oak for their kitchen cabinet door job. I have n ...

    Re: Looking for SCM Edgebander Tech in Los Angeles
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- We are in Pennsylvania. When I need tech support on our equipment, we call a machinery de ...

    Re: Is an ALL-Stainless Steel pressure pot really needed for waterborne???
    A message posted at WOODWEB's Finishing Forum (2/17) -- Charles, If you think spending a couple of hundred dollars is worth a trial to see if that ki ...

    Re: furniture base on euro cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- We cut the desired profile into a piece of base moulding, usually in the center, then add ...

    Going for a long shot here regarding fixing metal filing cab
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- My dentist asked if i can fix the few broken flip down doors on these filing cabs. There ...

    Solid Core Doors
    A message posted at WOODWEB's WOODnetWORK Forum (2/17) -- I'm looking to purchase Qty (566) Solid Core Door slabs 1-3/4" Thick 3'-0" x 7'-0 ...

    Re: Anyone using LED shop lights???
    A message posted at WOODWEB's Business and Management Forum (2/17) -- I am replacing the T12's as they go out with the T5. Most of the T12 fixtures a ...

    Re: Roo Glue Alternative - Bonding to Pre-fin plywood.
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- I agree with the PL but i would also suggest the PL polyurethane. Something that the mari ...

    Re: Plywood for boxes
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Columbia pure bond has been shit every now and again for the past 6 or so years. I've rip ...

    Re: Blum hinge mixup
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- I had the same problem with a loose fence. Some of our doors were drilled up to 27mm. I u ...

    Re: Bubbles in paint finish
    A message posted at WOODWEB's Finishing Forum (2/17) -- Bob - I posted a few questions that will help define the likely cause of the problem but if y ...

    Re: Retiring
    A message posted at WOODWEB's Business and Management Forum (2/17) -- Glen: Your numbers make it appear as though the shop you purchased had neither ...

    Re: How would you make these doors?
    A message posted at WOODWEB's Architectural Woodworking Forum (2/17) -- How thick are the stiles and rails? Did you say 2 1/4"? You could use 12 ...

    Re: Retiring
    A message posted at WOODWEB's Business and Management Forum (2/17) -- Our business broker used 2.5 times gross profit plus assets less liabilities. S ...

    Re: Retiring
    A message posted at WOODWEB's Business and Management Forum (2/17) -- I am curious how much a cabinet shop may be worth in terms of yearly gross inco ...

    furniture base on euro cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- what is the best way to build furniture base for euro style cabinets and install them? ...

    Re: furniture base on euro cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Vague, but here goes: make a base...4 feet and an apron and install to wall ...

    Re: Solid Core Doors
    A message posted at WOODWEB's WOODnetWORK Forum (2/17) -- Algoma hardwoods is my supplier, used them for years. they will ship LTL www.algomahardwood ...

    Re: Macasser ebony
    A message posted at WOODWEB's Furniture Making Forum (2/17) -- again, ebony cant be compared to mahogany. you cant just tack a pattern. better to glu ...

    Re: log lathe
    A message posted at WOODWEB's Sawing and Drying Forum (2/17) -- Will certainly do when finished . Meanwhile can you send me doe pics of your setup? ...

    Re: Macasser ebony
    A message posted at WOODWEB's Furniture Making Forum (2/17) -- i agree with john. consider build with mahogany and veneer with ebony ...

      ---   Return to Top   ---   View More Results