• Knowledge Base Search Results: 192
  • Forum Messages Search Results: 2714
  • Job Opportunities and Services Exchange Search Results: 1
  • Project Gallery Search Results: 60
  • Shop Gallery Search Results: 13
  • Shop Built Equipment Gallery Search Results: 8
  • Sawmill Gallery Search Results: 9
    • Your search for post found 92437 documents (of 103454 searched).
    2001-5000 of the 92437 results are displayed below.
      


    Knowledge Base Results:

    Making Time in Production Finishing
    Finishers talk about how to organize an efficient, high-volume cabinet finishing operation. May 15, 2008

    CNC tooling: What's the best?
    Solving the problems of worn-out router bits and torn-out melamine. January 3, 2001

    - Wood species
    Information on tree species and their uses. March 20, 2001

    Stain Chemistry, Solvent Content, Drying Time, and Adhesion
    Here's a highly informative, in-depth look at oil-based stain chemistry, along with some de-bunking of the conventional wisdom concerning application windows. May 18, 2010

    Kiln Drying Large Timbers
    An extended discussion of the technical issues involved in drying big beams for various uses. July 28, 2006

    Working Safely with Ipe
    Dust and oils from Ipe wood are allergenic and toxic. You need serious personal protective gear if you work with Ipe. Here's more info. May 16, 2008

    WOODWEB's Woodworkers Directory Policy & Instructions
    Submission Policy WOODWEB, Inc. and its staff assume no responsibility for the accuracy, content, or outcome of any listing posted at the...

    CNC Versus Traditional Machinery for a Start-Up Shop
    Here's a long, detailed, and thoughtful discussion about the ideal equipment investment for starting a cabinet shop, focusing on whether to jump into CNC right from the get-go. October 18, 2011

    What to Do When a Job Goes Sour
    Here's a seminar on how to handle the situation when the homeowner-GC-cabinetmaker relationship heads south in the middle of a job. January 10, 2008

    Teaching an Employee to Optimize Materials
    A problem with an employee who doesn't use up scrap leads to a long discussion on hiring, training, and firing procedures. May 20, 2009

    Does it Pay to Own an Edgebander?
    A good edgebander can really boost your productivity, but how much machine you need depends on how much volume you're doing. October 9, 2006

    Generating Working Capital
    A long discussion is triggered when a cabinetmaker asks how he can free up cash for running his business. Should he seek greater production efficiency, apply for a line of credit, or try to interest an outside investor? September 5, 2006

    Arched Crown Moulding
    You may never have to do it, but just in case you do, this thread with expert analysis, practical tips, and great pictures will help you wrap your head around the problem of fitting crown moulding to a barrel-vault wall-to-ceiling joint. November 2, 2010

    Microvellum Users Assess New Version
    An extensive and detailed look at the powerful drawing-to-cutlist integrated application's traits and quirks. August 29, 2005

    G Code Trick
    Writing code that repeats itself at different xy locations. June 4, 2004

    Whether to Remove a Lein
    A cabinetmaker who has not been paid asks whether he should remove his lein against the house, as requested by the owner. Colleagues explain why he should not. February 6, 2010

    Is This Job Discrimination?
    An African-American's story of a frustrating job search leads to a frank discussion of race as a factor in employment, along with some solid advice on landing a job. January 10, 2008

    Growing A Custom Cabinet Company
    12/17/2014

    CAD-to-Production Options
    Some insights into the ever-changing world of drafting and machining software integration as of Spring, 2007. October 3, 2007

    Honing Your Way to the Perfect Edge
    An extensive discussion on chisel and plane iron sharpening walks through the basic and advanced aspects of creating a shaving-sharp edge on your hand tools. May 13, 2013

    Software and Learning Curves for CNC Carving
    Finding the carving software is the easy part. Understanding its power and its limitations takes time. January 25, 2013

    Log Handling Solutions
    Loading and turning monster logs can really knock a small bandmill around. Here are tips on some subtle forms of log persuasion. February 12, 2007

    Edgebander or Small CNC?
    A part-time garage-shop cabinetmaker gets advice on whether his next investment should be a CNC or an edgebander. Good thoughts on both sides in this long thread. October 11, 2007

    How to Be Ready for OSHA
    Either the safety agency itself, or a private consultant, can help you identify hazards and avoid possible penalties — before you're surprised by a "real" enforcement inspection. April 20, 2007

    Kitchen Cabinets and Floors — Which Should Be Installed First?
    The decision affects both trades, and there's more than one well-reasoned opinion posted here. May 6, 2007

    Should I Install Cabinets for a Big Box Store?
    Advice from all sides, including those who tried it and liked it, and those who tried it and didn't. December 26, 2006

    Why Owning a Cabinet Shop is Tough
    Cabinet shop owners discuss why it's so hard to succeed in cabinetmaking, and discuss strategies for doing so. February 18, 2007

    Obtaining and Handling Logs
    Sawmill operators discuss ways to get free logs from contractors clearing land, and ways of loading and transporting the logs. August 31, 2005

    Running a Part-Time Cabinet Shop
    Many successful cabinetmakers got their start with a part-time operation. Here is some wise advice on how to make it work. June 23, 2006

    Twisted timbers
    Determining the cause of twisting in Douglas fir construction timbers. August 10, 2000

    Latex Paint Chemistry Question
    10/24/2014

    Darkening a Lacquer Finish On Site
    Finishers consider the fine points of darkening an existing old lacquer finish with hand-application methods. July 2, 2008

    Tool Control Tolerances for Routing a Hole
    CNC pros try to figure out why a CNC router is making lockset holes out of round. The culprit may be a problem with tool compensation in the lead-in and lead-out routine. September 24, 2006

    Support and Span Limits for a Concrete Top
    A discussion of table design involving issues of wood deflection and concrete span capability. June 15, 2009

    Lathe and Shaper Setups for Fluting and Reeding Columns
    Jigs and rigs for fluting and reeding columns or posts using a lathe, shaper, or router. April 24, 2006

    Marketing Tips for the One-Man Cabinet Shop
    Advice on getting your name in front of potential buyers, including builder, designers, and architects. June 30, 2008

    Direct Mail Marketing
    Pros consider the costs and benefits of mass mailings to attract business. December 20, 2005

    A multi-faceted challenge
    An architectural woodworker gets ideas for making a too-wide handrail intersect gracefully with an octagon-shaped newel cap. December 17, 2003

    Clear topcoats
    Basics on post- and pre-catalyzed finishes and more. January 16, 2002

    Working with Spray Glaze
    Advice on applying and removing a spray-on glaze product, and tips on compatibility with the base coats.February 29, 2012

    Specifying Router Bit Offsets in Alphacam
    Tips on tweaking the router bit settings for cutting closed and open curves. October 14, 2010

    Connecting Sections of Low Profile Rail
    A discussion of hardware choices and techniques for joining pieces of thin wood railings. December 26, 2006

    Eliminating Cherry "Tan Lines"
    Clear tape used to hold a miter glue-up apparently blocked the ultraviolet light, leaving Cherry wood with light lines. Is there any fix? December 6, 2011

    Site Cutting and Mitering Postform Countertops
    Handling these tricky miter cuts on site when the fabricating shop went out of business in mid-job proved less than fully satisfactory. July 16, 2012

    Backyard Shop Ideas
    Here's lots of advice for a first-time shop builder from cabinetmakers who have been there and done that (with a side discussion about relating to the neighbors). January 28, 2009

    Business Startup Advice
    Here's a rough-and-tumble thread providing advice and cautions for a would-be cabinetmaker. October 2, 2007

    Business Financing, Credit, and Cash Flow
    Pay as you go, or borrow to grow? This thread looks at both sides, and supplies some sage advice. December 2, 2006

    Photographing Kitchens Professionally
    Recommendations on creating high-quality shots of your work. April 2, 2004

    Bevel Cuts for Slope-Sided Boxes
    Here's a long discussion of a tricky compound-angle problem: how to calculate the bevel cuts for a box with sides of different slopes. October 8, 2005

    Powder Post Beetles in Plywood
    Amazingly, the bugs are not killed by plywood manufacturing methods, and can lurk inside plywood for years. October 27, 2011

    Business and Management Forum -- Marketing Ideas
    Cabinetmakers discuss email marketing, Google ads, and other methods for bringing in new business. February 11, 2010

    "Boxing Out" Timbers from Logs
    Advice on the best way to saw or hew frame-building timbers from logs. June 30, 2009

    Post-Cat Finishing Schedule for Rough Surfaces
    Solving a complex tinting and adhesion problem: using a post-catalyzed finish with gel stain on rough timbers. June 30, 2009

    Are Small Moulders Practical for Small Runs?
    Here's an extensive and informative run on the hows and whys of buying and using a small moulder to make short runs of custom profiles. October 19, 2013

    Team Player
    When you advertise for a "team player," what are you asking for? Seriously — this job seeker wants to know. January 2, 2012

    Work-Station Shop Organization Systems
    Thoughts on a shop setup that involves moving the workpiece from station to station, rather than moving pieces and tools onto and off of a single work bench.May 23, 2011

    Pricing Example: Bath Vanity
    An emotional, but informative, discussion of cabinet pricing based on one bath vanity example. September 23, 2006

    Getting a Table-Top Finish Perfectly Smooth
    How do you get a conference table top dead flat and smooth, with a glossy finish? Construction, finishing, and sanding all play a role. December 27, 2006

    "Chip Dent" in Planed Lumber
    Here's a long, detailed examination of the problem of denting in planed wood, caused by knives pressing chips into the wood surface. Unfortunately, no solutions. October 15, 2009

    Sawing & drying framing timbers
    Tips for producing timbers for timber-frame construction. September 19, 2001

    Miter-Saw Kickback Injury Story
    Miter-saw one, woodworker zero. Pain. Injury. January 19, 2011

    Deposits and Payment Schedules for Cabinet Jobs
    Here's an extensive debate on the reasons for requiring payment from customers in advance of starting work or delivering a product. December 7, 2008

    Trying To Solve Peeling Finish
    09/19/2016

    Troubleshooting Finish Flaws on a Piano
    Is that fish-eye or orange peel on that piano? Finishers help a colleague diagnose and treat a problem with conversion varnish. May 17, 2005

    Removing Ring Marks in a Veneered Table Top
    Refinishing pros offer opinions on how to refinish a badly marred wood-veneer table top. November 12, 2006

    Eliminating Overspray on Door Backs
    Finishers explain how to keep overspray off cabinet door backs when spraying the fronts. September 11, 2006

    Lumber Grading, Quality, and Small Mills
    Here's an extended discussion of the public policy issues involved in lumber grading, and construction using un-graded lumber, as seen from the point of view of the small sawmill operator. May 18, 2010

    Modifications and Tricks with Small Bandsaw Mills
    You can do a lot with a small portable bandmill, if you apply some creative jury-rigging. Check out this extensive set of photos. July 18, 2008

    Sawmill recovery rate
    Does one sawmill's recovery rate make it a better choice over another mill? (From WOODWEB's Sawing and Drying Forum) February 18, 2003

    Setting Shop Temperature
    A long discussion about how warm (or cool) to keep a shop, whether to turn the heat down at night and over the weekend, and the effect on costs, productivity, and quality of different practices. December 24, 2012

    When to Change Band-Mill Blades
    Long, thoughtful thread on cost-effective ways to manage the timing of blade changes and blade re-sharpenings. August 8, 2008

    Using Light Equipment to Try Out Sawmilling
    A poster thinking about whether to try milling some logs with a small chainsaw and shop bandsaw gets feedback from the pros. October 1, 2010

    Water Damage to Laminate Counter Seams
    A miter seam in a countertop near a seam is a risky situation. Here, pros consider a case of joint failure. July 3, 2008

    Building a sawmill shed
    Tips and designs for building a sawmill shed

    Exterior Wood Finish Maintenance
    This long discussion starts with a question about maintaining the finish on a beautiful outdoor wood gate, and continues into a detailed examination of the difficult durability issues with exterior clear finishes. January 14, 2008

    Installation Tips for Stair Treads, Risers, and Banisters
    A skilled, experienced finish, cabinet and furniture man is looking at his first-ever staircase — and it's already framed. His questions set off a long discussion on stair construction techniques. November 19, 2005

    Dangers of On-Site Finishing
    Health and fire risks that accompany improper ventilation. September 20, 2004

    Recognizing Income in QuickBooks
    Advice on how to apply accounting methods that keep your profit and loss statements in step with your cash flow and the value added to your materials inventory. August 28, 2010

    Working with Iron Balusters
    Installers share tips on laying out, cutting, and fitting metal balusters to a wood staircase and banister. August 2, 2005

    Building Your Own Spray Booth
    Pros discuss ways to ventilate and filter. March 17, 2005

    Taking a Business to the Next Level
    A question about equipment investment turns into a thoughtful seminar on marketing, pricing, and finding your niche. November 10, 2005

    Cost of running a CNC router
    Choosing the right CNC machine based on projected capabilities and costs. November 29, 2000

    Building a rotary phase converter
    How to build a rotary phase converter. November 29, 2000

    Determining CNC feeds and speeds
    Where to begin in a world with no standards. June 19, 2003

    Butcher Block Finish Dispute
    This long saga of a woodworker's difficulty with a customer who is dissatisfied with the finish on a butcher block shipped cross-country offers lessons on communication, contracts, and credit card company dispute resolution processes. March 26, 2010

    Melamine Carcasses
    Can melamine interiors be considered high end? April 18, 2004

    Spraying Doors in Vertical Hanging Racks
    A well-arranged rack system can speed up production dramatically. March 3, 2010

    Comparaison des laques et des vernis de conversion
    Les professionnels des vernis post-catalysés, pré-catalysés et de conversion comparent leurs expériences. 6 juillet 2005

    Comparing Lacquers and Conversion Varnish
    Post-catalized lacquers, pre-catalized lacquers, and conversion varnishes — pros compare experiences. July 6, 2005

    What Would You Feel About This Proposal From A Potential Salesperson?
    05/18/2015

    Cleaning glue out of edgebander
    The tedious process, illustrated. October 30, 2003

    Charging Enough to Stay in Business
    Seasoned cabinetmakers give a newcomer some hard-nosed advice on how to price his work realistically. October 15, 2009

    Cabinetmaker's Responsibilities
    Lively conversation about who should handle plumbing, electrical, etc. on kitchen/bath projects. December 9, 2004

    Tile Setters vs. Trim carpenters
    On a woodworking site, it's not tough to guess the winner of this battle. But the war of words makes for good reading. February 25, 2005

    Illegal Operation
    08/09/2014

    Don't Quit Your Day Job
    Starting a woodworking shop? Don't quit your day job. June 23, 2006

    Finding Good Finishing Help
    Tactics for attracting finishers, perhaps the industry's most difficult "get." December 26, 2004

    Overwhelmed
    07/31/2014

    Circular Stairway-Side Children's Slide Conundrum
    This stair-builders' thread about how to fabricate a slide that wraps around the outside of a spiral staircase morphs into a more general expert discussion about spiral staircases and handrails, with lots of nice photos. November 2, 2010

    Skilled Woodworker Employee Wages
    A highly qualified shop employee with broad responsibilities asks how to assess his own fair wage rate, and kicks off a spirited discussion among employers, employees, and self-employed craftsmen on the forum. February 10, 2009

    Customer Deposits and Payment Schedules
    A heartfelt and sometimes heated discussion about setting payment terms, including initial deposits, for a cabinet job. February 27, 2013

    Mahogany Finish - Custom Woodwork Finish for a Brazilian Boat Cabin
    Want to get technical? Read along with this conversation as a newcomer to finishing gets expert feedback on his evolving technique for refinishing a yacht interior in Brazil. April 29, 2012

    Digital Modeling, Furnituremaking, and the Artist's Vision
    A question about CAD and CNC for furnituremaking evolves into something much broader and deeper, as some extraordinary creative visualizations knock heads with some hard-bitten practical criticism. Technology versus Art: it's smackdown time for 12 full rounds. December 11, 2007

    Appliance Cutouts
    Standards, and a lack of, for kitchen appliace cutouts. August 7, 2004

    Missing A Deadline In A Big Way, How Would You Handle This?
    08/31/2014

    Cabinetmaking Productivity
    Shop owners and woodworkers discuss how fast the people ought to be able to pump out product, and consider strategies for making better time. April 13, 2010

    Analyzing Wood Species, Grain, and Sawing Methods
    Here's a long and complex (but very informative) thread that starts off with a wood identification problem, moves into a discussion of wood pore structure, and then takes off on an interesting tangent about quartersawing, flatsawing, and other methods for piecing out a log. March 22, 2013

    Finding the Value in "Low Grade" Wood
    A long and insightful discussion, with photos, about how to use (and sell) wood that is officially graded low. June 18, 2009

    Compound Curved Veneered Panels
    Theoretically, it's impossible (or "impractical") — but hey, we can dream. January 20, 2010

    Linking Spindle RPM to Travel Speed
    CNC owners discuss the feasibility of tweaking their control systems to couple bit speed with gantry travel velocity. July 16, 2008

    Gross Sales for a Small Shop
    Business owners discuss reasonable sales projections for a start-up cabinet shop. February 17, 2006

    Lean Versus Theory of Constraints
    Cabinetmakers discuss various approaches to optimizing operations and workflow. May 20, 2009

    Cupping and Bowing in Resawn Stock
    Furnituremakers discuss drying issues such as casehardening that can cause lumber to move when ripped or re-sawn. April 18, 2015

    Troubleshooting Moulder Tear-Out
    Tweaks to the knives, the feed rate, the drive belt set-up, or the bed board may help eliminate moulder chatter and tear-out. August 29, 2005

    Window Part Terminology
    Woodworkers try to bring order to the vocabulary universe and define "muntin," "mullion," "bar," "rail," and related window and door terminology. March 26, 2010

    Troubleshooting Mixing Issues with an AAA Pump
    A finisher tries to figure out why his CAT 2k pump is producing streaky results from the gun. July 29, 2014

    Troubleshooting Blushing on Cabinet Doors in Use
    Three months after the job, doors finished with waterborne conversion varnish are blushing. The culprit turns out to be ammonia in a household cleaner.October 20, 2013

    Trapped Bubbles in Waterborne Finish Coats
    Pros troubleshoot another case of those pesky bubbles. July 3, 2008

    Troubleshooting a Rough Finish Inside Drawer Boxes
    Here's a long thread full of advice for spraying the insides of drawers. October 20, 2013

    Sawmilling, Work, Love, and Money
    Here's some thoughtful discussion about work, the love of work, and the value of money, set off by a posting from a guy who misses his sawmill. January 25, 2010

    Layer Names and Line Defaults
    Organizing and simplifying layers in CAD. May 19, 2004

    Questions for a Sales Interviewee to Ask
    Applying for a sales job? Here's a useful list for when it's your turn to ask them a few questions. August 13, 2007

    Creosote-treated timbers: Cut with care
    Some wise precuations to take if milling lumber previously treated with creosote. September 21, 2000

    Choosing Between Red Oak and White Oak
    Furnituremakers consider the choice between Red Oak and White Oak for a display cabinet. August 17, 2009

    Sand-Through Finish Strategies
    Pros kick around ideas for a layered, sand-through finish for a multi-colored beat-up appearance. March 29, 2006

    Troubleshooting a Tool-Change Software Hang
    Manually changing a tool can make some CNC machines stop working because of a software issue. Here's how to troubleshoot and fix. March 4, 2009

    CV and formaldehyde fumes
    The wrong respirator can lead to serious health problems. July 22, 2003

    Troubleshooting a Bad Smell in Drawers
    Dead bacteria in plywood can cause a rancid odor, and a badly catalyzed finish may also produce offensive smells. March 9, 2010

    CNC Efficiency Versus Other Machinery
    Will a CNC speed up your operation? That depends in part on what you're producing. July 8, 2014

    Glazing Pigmented CV and Sanding Questions
    Glazing with conversion varnish can be tricky. Here, finishers discuss some fine points. October 15, 2009

    Understanding Coverage with a Post-Cat Primer
    How to estimate the coverage you should get in real life, based on reading the can and measuring the wet thickness you apply. January 29, 2014

    Advertising alternatives
    What are the best-bang-for-buck advertising venues for woodworkers? November 7, 2000

    Cutting a Post-Formed Laminate Countertop
    Hiring the job out to a well-equipped countertop shop is your best bet — but here's how to do it with an installer's toolkit. February 8, 2008

    Decay and termite resistance of medium density fiberboard (MDF) made from different wood species
    Medium density fiberboard (MDF) production worldwide is increasing due to the development of new manufacturing technologies. As a result, MDF products are increasingly utilized in traditional wood applications that require fungal and insect resistance. This study evaluated the ability of white and b ......

    Maintaining a Point of Reference
    Picking the brain of custom furnituremaker David Fay. July 17, 2002

    Compatibility of Solventborne and Waterborne Formulas
    A conversation about the feasibility of using solventborne dyes, a vinyl sanding sealer, and a waterborne topcoat on a single piece. April 17, 2010

    Drying and Sawing Sycamore Logs for Beams
    Advice on how to get useable large-dimension lumber out of Sycamore logs. January 8, 2010

    Dowel Construction Advice
    A cabinetmaker who has just invested in a horizontal boring machine gets help making the transition to dowel construction. August 22, 2013

    The limitations of juvenile lumber
    Exactly how useful is the lumber yielded by less-than-mature trees? August 10, 2000

    Suspending a Power Feeder from the Shop Ceiling
    Pros and cons of mounting a stock feeder on the shop ceiling to be shared by multiple machines, plus advice from someone who has done it.November 28, 2014

    Sycamore for a Post and Beam Frame?
    Beautiful as the wood is, Sycamore's tendency to twist makes it a questionable choice for timber framing. December 28, 2006

    Distressed and Rub-Through Finishing Techniques
    Finishers suggest an assortment of methods for achieving a worn look in finished cabinets and furniture. March 28, 2015

    Technology to Help Photograph Your Work
    An Apple iPad is a handy way to take and post photos of your work. June 16, 2014

    Staining Resin Corbels to Match Walnut
    Advice on a finishing schedule to make synthetic trim elements blend in with natural wood. December 2, 2009

    Does Vacuum Kill Insects?
    Nope, you need heat to kill bugs in wood (and don't call them bugs). March 4, 2009

    Is Facebook Good Marketing for a Woodshop?
    Cabinet shop owners talk about the traffic and sales value of maintaining a presence on Facebook. April 22, 2014

    Cutting a Bead on a Curved Backband Moulding
    Tips on fine-tuning an elliptical shaper jig so that it will profile a bead correctly on the inside edge of a curved piece. June 24, 2007

    Flushing and Draining AAA Fluid Hoses
    How to get hoses clean and prepped for the next day's work. January 27, 2007

    Green Douglas Fir for Barn Framing
    Green softwood lumber is fine for framing an outbuilding. August 29, 2006

    Ticking, Mottling, and Blotching
    like blotching, but different. July 3, 2008

    Dehumidifier Kiln Drying and Insects
    Cooler temperatures in a DH kiln aren't a reliable way to kill all insects, but the dryness will get some of them. May 18, 2010

    Voltage and Amperage for a Postform Heater
    A close look at the plug gives clues to the voltage and amperage of the device. February 1, 2015

    End Grain Tear-Out on a Shaper
    How can tear-out be minimized when running end grain across the cutter head? April 21, 2011

    Sheltering Your Sawmill
    Ways to put your sawmill under a simple roof. December 30, 2007

    Applying Laminate to a Radius
    Tradesmen explain handwork techniques for fitting laminate to radiused postform countertops. June 20, 2005

    Pros and Cons of Outsourcing Doors
    Here's a detailed and lively discussion among cabinetmakers and door specialists about the key issues in outsourcing doors, including schedules, quality, efficiency, cost, and making good on mistakes. October 26, 2007

    Helical Handrail Math for Spiral Stairs
    Woodworkers puzzle over the twisted math involved in making a profiled handrail follow the curve of a spiral stair. January 26, 2008

    Profit Margins
    Defining profit and determining how much you should expect. November 22, 2004

    Black Locust Durability for Outdoor Decking
    A discussion of the suitability of Black Locust wood for outdoor use as decking or for benches. May 6, 2009

    Panel Goods and Cutter Life
    A search for melamine-faced MDF leads to a long discussion on the way different types of panel materials wear out tools. February 14, 2006

    Professional Development for Furnituremakers
    Here's a furniture maker with skills and experience who wants to elevate his game. What are his options? June 4, 2012

    Ballpark Numbers: Materials, Labor, Overhead, and Profit
    Business owners compare notes on their numbers. March 11, 2009

    Problems with Conversion Varnish Sanding Dust Residue
    Finishers discuss how to get pieces clean between the sanding and topcoat steps. December 2, 2009

    Black Powder Log Splitting
    You can split large-diameter short logs with black powder. But is it worth the risk, or should you stick with a chain saw and wedges instead? July 13, 2006

    How To Make Normal Mahogany Look Like Crotch Mahog
    01/17/2015

    Planing a Tapered Timber
    Ideas for surfacing a 13-foot tapered redwood timber — while keeping the taper. June 12, 2006

    Bidding on Commercial Work
    Advice on effective bidding in the commercial world, and tips on avoiding trouble. November 5, 2007

    Powder-Post Beetles in Cabinetry
    Where could those pesky critters be coming from? June 5, 2007

    Bandmill Setup on a Slope
    A small sawmill owner shows his portable mill set up on a gentle hillside slope. October 15, 2010

    Post-Cat Material Flow Issues
    Fluid temperature and tip size can make all the difference. September 16, 2008

    Help Selling Timber In Virginia
    12/30/2012

    Pigmented Pre-cats / Post-cats
    10/30/2014

    Previous Post On Humidity And Cabinets
    11/19/2014

    Setting up new finishing department
    Forum participants chime in on their favorite types of finishing systems, and approaches to establishing a finishing department. April 21, 2000

    Pricing Cabinet Installation Work
    Pros discuss their differing approaches to charging for kitchen and bath cabinet installation work. January 24, 2005

    Future of Sawmilling
    Here's a long, conversational thread on the economics of sawmill operations and the big picture of the general economy. August 31, 2009

    Learning About Edgebanders
    Advice for a woodworker who is in the market for a very low-priced edgebander, and wants to educate himself about edgebanders and other machinery. March 13, 2014

    Figuring Out Where The Money Is Going
    02/14/2016

    Achieving Sterilization with a Solar Kiln in a Humid Climate
    A woodworker struggles to get his lumber pile hot enough to kill beetles. April 15, 2012

    Quick-Release Mounting Rigs for Power Feeders
    Ideas for attaching power feeders to machines so that the power feeders can be quickly mounted and dismounted. January 29, 2009

    Making Arched Window Casing Trim
    Steam bending is impractical — laminating small strips into an arch shape for moulding stock is the way to go. April 24, 2009

    Gravity spray guns
    Are these suitable for the small shop, or is there a better choice? September 25, 2002

    Conference Table Disaster
    One of life's hard lessons: Moisture-related wood movement has caused severe bowing in an unbalanced conference table. August 21, 2006

    More About Sanding
    And some more about sanding. Then, a little more about sanding. Finally, just a little more about sanding. June 5, 2006

    Scribing Beaded Face Frames into Enclosed Spaces
    Neat tricks for fitting a beaded face-frame cabinet into a space trapped on both sides by framed walls. February 11, 2010

    Bonding for Small Jobs
    Even if you're a relatively small subcontractor, you may occasionally be asked to post a bond. It's not so complicated. July 20, 2011

    Powder Post Beetle Infestation
    Don't put those timbers in your house. January 29, 2009

    Working With Metal Laminates
    05/20/2012

    Cutting Post-Form Laminate Tops
    If you don't have a slider, you can cut the top from the back side with a circular saw. November 14, 2014

    Sliding Table Saws — Choices and Alternatives
    A discussion about upgrading the panel cutting capabilities of a shop with limited floor space. July 28, 2012

    Drilling a Hole the Length of a Log
    People have actually succeeded at drilling holes in logs the long way. Here, they explain how to do it. December 27, 2006

    Choices for Glazing
    Here's advice on glazing for a beginner who's having trouble. July 11, 2013

      ---   Return to Top   ---   View More Results   


    Forum Results:

    Aspire Biesse post processor
    A message posted at WOODWEB's CNC Forum (8/8) -- I need to find a post processor for aspire to run a Biesse Klever. I think it can be done but it's o ...

    Re: sawing a solid black walnut mantle
    A message posted at WOODWEB's Sawing and Drying Forum (4/8/22) -- I sometimes wonder if people responding to posts are basing their opinions on “what ...

    Re: Painted cabinets: Catalyzed CAB Acrylic Conversion Coating vs 2K Poly
    A message posted at WOODWEB's Finishing Forum (4/8) -- What are the more proper ways of prepping and priming? And how do most people screw up? I have ...

    Re: Can I run conversational software and a post processor on the same mach
    A message posted at WOODWEB's CNC Forum (3/8) -- This is a little unclear to me as well. Even if you program with conversational software it still go ...

    Re: Concerning wormy chestnut...Part 2:
    A message posted at WOODWEB's Finishing Forum (3/8) -- I'm not sure what would be your best finish for the chestnut but I will tell you that it is ex ...

    Milling wood for epoxy adhesives
    A message posted at WOODWEB's Adhesives Forum (2/8) -- Personally, the question is professional in that, that is how I want to solve all problems. Bu ...

    Re: Headphones/Earbuds in the shop
    A message posted at WOODWEB's Architectural Woodworking Forum (1/8) -- Hmmm, arrogant, really? I am considering my employees, well a few of them, oth ...

    Re: Gun Filter clogging up quickly with sediment?
    A message posted at WOODWEB's Finishing Forum (12/7) -- Quick follow-up to my NOTE #4 in the previous post. The 100+ day old product and the 37 day o ...

    Re: Remove bark before or after drying large slabs
    A message posted at WOODWEB's Sawing and Drying Forum (11/7) -- Thanks for all the thoughtful responses. I will go ahead and remove the bark now whil ...

    Re: Kem Aqua plus Clear
    A message posted at WOODWEB's Finishing Forum (9/7) -- Steve are you sure about your last post wanting to try Aqua SANDING Sealer T65F520. Did you me ...

    Re: Shop rate, calculating, again?
    A message posted at WOODWEB's Business and Management Forum (8/7/23) -- Correction: In the fifth paragraph of my post I stated "for planing, I f ...

    Clamping Parquet Using Epoxy
    A message posted at WOODWEB's Architectural Woodworking Forum (7/7) -- Hello, this is a follow up question to a post i uploaded month or 2 ago. Got s ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (6/7) -- The RC-33 is a great machine when it is running correctly. I bought mine in 1984. P ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (5/7) -- I am glad that this thread has unspooled far enough that I finally grasp the p ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (5/7) -- Thanks Kevin. Yes I was referring to my long post. You may be interested to kn ...

    Re: Mystery Discoloration of Doug Fir Veneer
    A message posted at WOODWEB's Finishing Forum (2/7) -- Gene: I was taken with your theory that the glue thickness may relate to the pressing process, ...

    Re: Mosaik with Weeke Vantage?
    A message posted at WOODWEB's CNC Forum (2/7) -- Wait there is something,,,,weeke machines must see .mpr file,,,forgot to say,,,I found this out the ...

    Re: Biesse Rover321 needs post for Biesseworks
    A message posted at WOODWEB's CNC Forum (2/7) -- Sample code will be required, I would look to AlphaCam,BobCad, CADCode for a CAD/CAM Solution for th ...

    Re: post cat lacquer/cv wet coat thickness
    A message posted at WOODWEB's Finishing Forum (1/7) -- If you are using vinyl sealer under a post-cat finish, you need to catalyze the vinyl sealer a ...

    Laminate Adhesives?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/7) -- In our shop we use regular contact adhesive applied with a brush or rolle ...

    Re: Connecting to builders, architects and designers
    A message posted at WOODWEB's Business and Management Forum (12/6) -- Dave, thank you and good luck to you. Let me mention 3 examples (all non-wood b ...

    fanuc how to avoid pecking
    A message posted at WOODWEB's CNC Forum (11/6/23) -- Our Cabinetvision Intelli-cam post suddenly says "pecking not allowed!" We have been u ...

    Re: Pole barn vs steel building
    A message posted at WOODWEB's Business and Management Forum (9/6) -- To make a steel frame building energy efficient, you have to build a wooden buil ...

    Sanding dust
    A message posted at WOODWEB's Cabinetmaking Forum (8/6) -- I've never posted here before but have been looking through the post for years and have ga ...

    Re: New shop floor plan
    A message posted at WOODWEB's Cabinetmaking Forum (7/6) -- If you're not sure of the size, I presume you are not sure of the shape of the building or ...

    Re: Alphacam vs V-Carve/ Aspire
    A message posted at WOODWEB's CNC Forum (6/6) -- Lot of Mike's on this thread... Thanks guys. Mike F, your post is particularly useful. I too have a ...

    Re: Interesting read about the future of housing
    A message posted at WOODWEB's Business and Management Forum (6/6) -- Perhaps it is just me, but when I hear the rationales posted here for an economi ...

    Re: Any KCD cnc commander users
    A message posted at WOODWEB's CAD Forum (4/6) -- Hi Henry, I've been through this the long and hard way over the last 2.5 years. As I've posted in a ...

    Re: Anyone starting a new business??
    A message posted at WOODWEB's Business and Management Forum (4/6) -- Figure out what business you are in, e.g. the car business and the motorcycle bu ...

    Re: Black Walnut Tree
    A message posted at WOODWEB's Sawing and Drying Forum (4/6) -- Richard, I'm sorry I thought the posts were putting my website there also.....it remem ...

    Re: Curved chair backs
    A message posted at WOODWEB's Furniture Making Forum (2/6) -- I've asked the poster to send me the image - if he does, I will resize it and post it h ...

    Re: Vacuum Psi vs. Glue Specs.
    A message posted at WOODWEB's Architectural Woodworking Forum (2/6) -- A lively thread. David, I can't give a definitive answer, except that probably ...

    Re: I was right all along. Woodworking shop owner=%20lack of education+ horri
    A message posted at WOODWEB's Business and Management Forum (2/6) -- I had to laugh when I saw this. Mel has been absent for awhile and could always ...

    Re: Biesse Rover321 needs post for Biesseworks
    A message posted at WOODWEB's CNC Forum (2/6) -- I looked into it for a 1999 Rover 321. I gave up and used the same amount of cash as a down on a cnc ...

    Re: Connecting to builders, architects and designers
    A message posted at WOODWEB's Business and Management Forum (12/5) -- The secret sauce with your sales efforts that will greatly increase your battin ...

    Re: Hussey Knife Alignment
    A message posted at WOODWEB's Architectural Woodworking Forum (11/5) -- What? You push the cutter towards the post, tighten and that's it! We've over ...

    Re: Installing walnut countertop on knee wall
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/5) -- I was just getting ready to post what Jeff D did until I read his pos ...

    Re: Efficient methods for 2-sided finishing?
    A message posted at WOODWEB's Finishing Forum (10/5) -- Matt, I was annoyed when I read your post. I responded in a harsh way. My apologies. There ar ...

    Re: AYC lumber grading?
    A message posted at WOODWEB's Sawing and Drying Forum (9/5) -- Yes Alaskan Yellow Cedar . Cupressus nootkatensis. Yeah, other vendors had said c& ...

    Re: Kem Aqua plus Clear
    A message posted at WOODWEB's Finishing Forum (9/5) -- David were you using the clear as a self sealer as i was when you posted your first reply ---- ...

    Re: What to do with extra dust pipe
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/5) -- I forgot all about this post, but the extra duct is starting to ta ...

    Re: Yellow glue vs White glue
    A message posted at WOODWEB's Adhesives Forum (8/5) -- I'm with the others in this thread: We will always experience confusion when we use homeowner ...

    Am I coming your way?
    A message posted at WOODWEB's Business and Management Forum (8/5) -- Coming to the east coast soon. If your in my path, call me at 615-293-6482 and l ...

    Re: (one man shop) Questions and Machinery Needed For a New Cabinet Shop
    A message posted at WOODWEB's Cabinetmaking Forum (6/5) -- Hi all, first wanted to say thank you for all the replies ive so far received. With the ma ...

    Re: Cabinet Vision Labeling
    A message posted at WOODWEB's CNC Forum (6/5) -- We use cv on our Rver S aitoload machine. Cv wrote a special post for the 6 sided machining operatio ...

    Re: Alphacam vs V-Carve/ Aspire
    A message posted at WOODWEB's CNC Forum (6/5) -- I'm running a SCM Pratix for the last 14 yrs with both of the above programmes. AlphaCam V7 came wit ...

    Vegas or Bust
    A message posted at WOODWEB's Business and Management Forum (6/5) -- Gentlemen, AWFS 2015 is just around the corner (starts July 22). And we at Busin ...

    Re: Mozaik Support
    A message posted at WOODWEB's CAD Forum (6/5) -- James, Yes, we posted around 9 questions so far at the forums board, some of them were answered and ...

    Re: Mozaik
    A message posted at WOODWEB's CAD Forum (5/5) -- Hi all, It's been some time since this discussion was alive, but Jim Walz's latest comment jogged my ...

    Re: How do you dispose of your odd sized pallets?
    A message posted at WOODWEB's Business and Management Forum (3/5/23) -- I'd check to see if you have a company that does free pallet collection. You ...

    spraying post cat.varnish over old lacquer
    A message posted at WOODWEB's Finishing Forum (3/5) -- Can you apply post catalyzed varnish over furniture previously sealed with lacquer? Thanks ...

    Biesse Rover321 needs post for Biesseworks
    A message posted at WOODWEB's CNC Forum (2/5) -- We have a customer that bought a 1998 Rover 321. He would like to run Biesseworks 3.0 or 3.4. Is the ...

    Re: I have a felony
    A message posted at WOODWEB's Business and Management Forum (1/5) -- "clueless" Mauricio, I too think Kip's post is pretty much on point. H ...

    Re: post cat lacquer/cv wet coat thickness
    A message posted at WOODWEB's Finishing Forum (1/5) -- I would had that I am used to use floor poly applied on trims using foam brush so maybe my exp ...

    Re: Hussey Knife Alignment
    A message posted at WOODWEB's Architectural Woodworking Forum (11/4) -- You need to press the knives back against the backstop and over towards the p ...

    Re: Help...Milesi 2k waterbed poly without hardener
    A message posted at WOODWEB's Cabinetmaking Forum (8/4) -- Leo, You have had some informative replies, once you even emailed me directly and I thank ...

    Re: V Carve Programmer Needed
    A message posted at WOODWEB's CAD Forum (7/4) -- Or post a dxf or shop drawing,,,,I’ll redraw and apply a tool path to it,,,I just need the machine a ...

    Ripping Planks: The movie
    A message posted at WOODWEB's Cabinetmaking Forum (6/4) -- I typed this response to Ian's post below about 'sheetgoods bending when ripping'. I certa ...

    Re: Cabnetware 14
    A message posted at WOODWEB's Cabinetmaking Forum (5/4) -- Search here for cabnetware posts. There's somebody who's posted here before dealing in use ...

    Re: Wainscoting pricing
    A message posted at WOODWEB's Architectural Woodworking Forum (5/4) -- he asked of a way to price it out, and if there was a reliable ballpark soluti ...

    Re: 1st Job
    A message posted at WOODWEB's Sawing and Drying Forum (3/4) -- I wouldn't cut anything off the length if you can avoid doing so. You might need the f ...

    Re: 3D CAD for Cabinet Design and Production
    A message posted at WOODWEB's CAD Forum (2/4) -- Hi Steve. I am away from my computer at the moment so I cannot post any examples but take a look at ...

    Re: Vevor random orbital sander
    A message posted at WOODWEB's Finishing Forum (1/4/25) -- Hello everyone on wood web! I am in a very similar situation to the Opie and had the same q ...

    Re: Estimating Question
    A message posted at WOODWEB's Cabinetmaking Forum (10/3) -- Hi Mitch, I agree with what you say and indeed I produce a proposal which is a nice piece ...

    Cedar For Sale - Selling / Advertising Options
    A message posted at WOODWEB's Forestry Forum (9/3) -- I have approximately 100 cedar Logs that I’m trying to sell. I posted them on Woodweb, Craigsli ...

    Re: Switching from Cabinet Vision
    A message posted at WOODWEB's CAD Forum (7/3/23) -- please dont switch from cabinet vision,,,one of the dumbest thing i ever did,,,their service suck ...

    Re: Biesse S vs Selexx
    A message posted at WOODWEB's CNC Forum (7/3) -- Looked for some information on the Giben and read about a few issues with writing a bug-free post bu ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/3/24) -- Just a PS to the above in case it's of interest - but as above anybody thinking ...

    Re: Wainscoting pricing
    A message posted at WOODWEB's Architectural Woodworking Forum (5/3) -- in response to Rich C I understand the need to know overheads but there are or ...

    Find some qualified help
    A message posted at WOODWEB's CAD Forum (4/3) -- I run a cabinet shop in a rural part of San Diego and we are looking for qualified help. But it seem ...

    PPB worries
    A message posted at WOODWEB's Sawing and Drying Forum (4/3) -- I am in the process of building a cabin and have been cutting down ash trees to use fo ...

    Re: Intro to Marketing Cabinet Business
    A message posted at WOODWEB's Business and Management Forum (3/3/22) -- Oh, and post your work in Instagram! Like and comment on others and if you us ...

    Re: new guy with CNC questions
    A message posted at WOODWEB's CNC Forum (2/3/22) -- Hi Brad, I was looking at your post again and I realised that the photo you posted is not just of ...

    Re: Altendorf WA8 fence alignment
    A message posted at WOODWEB's Cabinetmaking Forum (2/3/22) -- The fence rides on a round bar attached to the table top with two threaded posts. Adjus ...

    Re: Mozaik
    A message posted at WOODWEB's CAD Forum (2/3) -- At 125.00 per month, (initial Cost) and a post for a very expensive machine, I cannot say this would ...

    Re: Mozaik
    A message posted at WOODWEB's CAD Forum (2/3) -- Benjamin... what do you mean by verify before paying? I ask because Roger tells me they wont attempt ...

    Re: Kiln drying oak / Croatia
    A message posted at WOODWEB's Sawing and Drying Forum (1/3) -- Good day and than You for reply. I'll surely look up for mentioned webinar & have ...

    Re: The best glues for exterior door panels that withstands heat
    A message posted at WOODWEB's Adhesives Forum (1/3) -- The OP (original poster) said "Dr, a national casual", but the correct name is " ...

    Re: My sawdustburner
    A message posted at WOODWEB's Value Added Wood Processing Forum (1/3) -- Sounds like a bad scene. I'm glad to hear past experiences. That's why I pos ...

    Re: Making authoritative paint samples
    A message posted at WOODWEB's Finishing Forum (9/2/21) -- Chemmy, You and many of the old timers (non derogatory statement) that post on WoodWeb are ...

    Re: Doing right by my employer
    A message posted at WOODWEB's Business and Management Forum (7/2) -- You’re asking us to make a judgment call, we’ll here is mine. From your post you ...

    Re: Fusion 360 post for Masterwood Router
    A message posted at WOODWEB's CNC Forum (5/2/22) -- Hi Dean I received and replied to your email re. the post processor. Did you come right? Let me k ...

    Re: What is your applicant-screening process?
    A message posted at WOODWEB's Business and Management Forum (5/2) -- Concerning the math thing, I have met several people that thought 1/8 was bigger ...

    Re: Researching 5x10 Nested CNC's Biesse,Holzher,Anderson
    A message posted at WOODWEB's CNC Forum (4/2) -- FWIW I bought a used Anderson stratos this year at auction. Assembling the gantry after moving I dro ...

    Re: Molding/Shaper Knives
    A message posted at WOODWEB's Solid Wood Machining Forum (3/2/23) -- John I would agree with the posts about safety concerns. The practice you're ref ...

    Re: Dipping Red
    A message posted at WOODWEB's Finishing Forum (3/2) -- Hi. I cann ot tell from your description or from the picture what the issue is that you would ...

    Re: Best CAD /CAM for solid stock woodwork mfg
    A message posted at WOODWEB's CAD Forum (2/2) -- There are alot of really great software packages out there,,when selecting software,,,make sure the ...

    Re: Aspire post for Fanuc
    A message posted at WOODWEB's CNC Forum (1/2/24) -- Maybe try an Vectric forum? Specify the control model, i.e. 210i, as well as Northwood. I think V ...

    AAA Nozzle size
    A message posted at WOODWEB's Finishing Forum (1/2/22) -- Hello all, I have a CAT 14:1 pump that was set up with a 411 nozzle I also picked up a 511( ...

    Re: fabricating 'standard' handrail fittings
    A message posted at WOODWEB's Architectural Woodworking Forum (1/2) -- The job my original post was instigated by has concluded. It came out great, h ...

    Re: Microvellum issues/optional software
    A message posted at WOODWEB's CAD Forum (1/2) -- This is proving to be quite the interesting thread. First off, I would have to question the legitima ...

    Re: checks in maple paper backed veneer doors
    A message posted at WOODWEB's Veneer Forum (1/2) -- The core and veneer would have been in the shop for about a week before processing and week to pr ...

    Re: Microvellum issues/optional software
    A message posted at WOODWEB's CAD Forum (1/2) -- RSI I apologize for my previous post and basically calling you a “troll”. That was perhaps a bit str ...

    Re: gum
    A message posted at WOODWEB's Sawing and Drying Forum (12/1) -- Specifically I was asking if anyone had ever tried to take a straight 10or12: black g ...

    Re: Variety of Joints
    A message posted at WOODWEB's Architectural Woodworking Forum (12/1) -- Yes, that is the reason I posted this photo. That bench represents a few nice ...

    Re: Eco Steps Coatings (ESC)
    A message posted at WOODWEB's Finishing Forum (11/1) -- Thanks for the replies. I am no stranger to grain raise as I have been using GF enduro for ab ...

    Re: Crown on a vaulted ceiling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/1) -- The profiles will change from straight run to a vaulted ceiling run b ...

    Re: True 32
    A message posted at WOODWEB's Cabinetmaking Forum (10/1) -- If you post questions Mark Poole, Bob's old (in both definitions) Partner or someone else ...

    Re: What vacuum pump would you recommend?
    A message posted at WOODWEB's CNC Forum (10/1) -- Yes, I was really just stating that most of the Vac power goes to leaks caused by kerf. (CFM) More ...

    Re: Bed design help
    A message posted at WOODWEB's Furniture Making Forum (10/1) -- In answer to your original question, yes, two rails 5" deep x 1 1/4" thick w ...

    Re: Switching from Cabinet Vision
    A message posted at WOODWEB's CAD Forum (9/1/22) -- For anyone using or returning to Cabnetware we offer full service tech support and software neede ...

    fabricating 'standard' handrail fittings
    A message posted at WOODWEB's Architectural Woodworking Forum (8/1) -- I finally recently opened my own shop, and as life does, it has thrown me into ...

    Re: Low profile slotter
    A message posted at WOODWEB's Architectural Woodworking Forum (6/1) -- Steve, Thanks. I appreciate your taking note of the old business.......and now ...

    Re: air control valve on cougar
    A message posted at WOODWEB's Finishing Forum (4/1) -- robert i surely did that but never mentioned it.. I knew they would tell me there was no way i ...

    Re: What is the best way to join wood for hollow posts?
    A message posted at WOODWEB's Architectural Woodworking Forum (4/1) -- Good point in the earlier post by Rich C. I had a huge problem with "mode ...

    Re: Insulated Glass spacer blocks
    A message posted at WOODWEB's Architectural Woodworking Forum (4/1) -- Thank you Joe for your comments. I will address them as best as I can in this ...

    Latex over post cat primer
    A message posted at WOODWEB's Finishing Forum (4/1) -- Anybody know if I can use chemlife 24 post cat primer under latex? This is a prime only, paint ...

    Re: Skinning
    A message posted at WOODWEB's Finishing Forum (3/1/22) -- The goal here is to eliminate damage from oxygen or moisture during storage. Bloxygen provi ...

    Re: SCM Pratix Error — Need Help!
    A message posted at WOODWEB's CNC Forum (2/1/23) -- Thanks for the reply! The link you posted got cut off, but, yes, that’s my post on cnczone. Same ...

    Re: 3D CAD for Cabinet Design and Production
    A message posted at WOODWEB's CAD Forum (2/1) -- Kerry, Very impressive. Based on my observations of your post here and over at Thermwood I would say ...

    Re: Door panels cracked
    A message posted at WOODWEB's Architectural Woodworking Forum (1/1) -- Engineered(manufactured) beams & posts are thought to be better structural ...

    Re: Crown on vaulted ceilings
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/1) -- Mike - I will apologize also, but keep in mind that when I posted, I h ...

    Veneer and Post Laminating
    A message posted at WOODWEB's Veneer Forum (3/31) -- https://attendee.gotowebinar.com/register/1388296568082265615 Wilsonart conducts Fabrication Uni ...

    Re: Labor shortages: How to fix
    A message posted at WOODWEB's Business and Management Forum (3/31) -- Brave but true Post, i have fought local school systems to no result for closin ...

    Re: curved stair handail questions for professionals
    A message posted at WOODWEB's Architectural Woodworking Forum (10/30) -- Respectfully, I think we can discuss machines vs hand, solid vs laminated al ...

    Re: Post cat lacquer issues
    A message posted at WOODWEB's Finishing Forum (9/30) -- Yes i added a tiny bit more catalyst as per something i read to try. The glaze is a valspar a ...

    Post v28
    A message posted at WOODWEB's CNC Forum (9/30) -- Im looking for a bobcad v28 gibens post, Or help modifying one. ...

    Fence Post Mill
    A message posted at WOODWEB's Value Added Wood Processing Forum (8/30) -- I live in B.C. and have access to lots of bug kill Lodge Pole Pine. To util ...

    Mach3 post Processor for MasterCam 2022.... any existing ?
    A message posted at WOODWEB's CNC Forum (5/30/22) -- 1st; does anyone knows if there such thing as a Post P for MC-2022 to Mach3 ? I know Mach3 is pa ...

    Re: Electric Appliance Lift
    A message posted at WOODWEB's Furniture Making Forum (3/30) -- If any of you that contributed to this forum are interested I did complete this unit a ...

    Re: Looking for suggestion of where to get rid of pipe/fittings
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (9/29) -- Besides the Classified Listings here, what about posting for sale ...

    Old porch handrail fittings
    A message posted at WOODWEB's WOODnetWORK Forum (9/29) -- I have an inquiry to get some old porch rail fittings. The section is like 7 1/2" wide ...

    Re: Artcam/Carveco Post Processor
    A message posted at WOODWEB's CNC Forum (8/29/24) -- I'm sorry, Artcam hasn't been around for a long time. Last machine I had post for was an XP mach ...

    Re: Alphacam Post Processor
    A message posted at WOODWEB's CAD Forum (4/29) -- be patient there maybe some one with your post processer. if you buy from planit theyre gonna want ...

    Post help for Cosmec 250-510
    A message posted at WOODWEB's CAD Forum (10/28) -- Hello i am looking for someone that has G-code for a Cosmec 250-510 that uses multiple drill in a ...

    Re: Post Processor for Biesse FTT R8
    A message posted at WOODWEB's CNC Forum (8/28) -- Did you talk to Guacomo at Biesse Canada ? CV wrote a post for our Biesse Elix 1300. Little simpler ...

    Re: AlphaCam Suddenly Stopped Working
    A message posted at WOODWEB's CAD Forum (6/28/23) -- software caused us major headaches at the worst possible times,,,,monday morning start ups,,,sat ...

    Re: AlphaCAM; WoodWop Post to Weeke
    A message posted at WOODWEB's CNC Forum (4/28) -- Hi, which post you have for a wood wop? Where you have zero point in a Alphacam? ...

    Re: Refinishing
    A message posted at WOODWEB's Finishing Forum (2/28) -- Yes Pre-cat over post cat good Post cat over pre-cat no good It's ok to put a softer finish o ...

    Post for Masterwood drill block and spindle
    A message posted at WOODWEB's CNC Forum (4/27/22) -- Hello, We had a Masterwood CNC retrofitted with a new controller and are in need of help of find ...

    Re: Can I run conversational software and a post processor on the same mach
    A message posted at WOODWEB's CNC Forum (4/27) -- A machine can use design software at the same time, but I have not tried post-processing software. ...

    Smallest field spray setup. Post cat.
    A message posted at WOODWEB's Finishing Forum (6/26) -- I am trying to put together the smallest spray touch-up kit I can. My manufacturer uses post- ...

    Re: Post Production Output
    A message posted at WOODWEB's CNC Forum (5/26) -- For what? Cabinet design? Nesting? CAM? Looks like KCD CNC Commander will export G-code easily. Can ...

    Re: Pre cat over cat
    A message posted at WOODWEB's Finishing Forum (4/26) -- Right now my favorite is ML Campbell I am right around the corner of a Wurth group and I have ...

    Re: Post Production Output
    A message posted at WOODWEB's CNC Forum (5/25) -- Can you define post production a bit more? ...

    Alphacam Post Processor
    A message posted at WOODWEB's CAD Forum (11/24) -- I am looking for an Alphacam post processor for and Omnitech Pal 5' x 10' CNC Router router has a ...

    Alphacam Post Processor
    A message posted at WOODWEB's CNC Forum (11/24) -- I am looking for an Alphacam post processor for and Omnitech Pal 5' x 10' CNC Router router has a ...

    Re: Alphacam Post Processor
    A message posted at WOODWEB's CNC Forum (11/24) -- Not sure I understand the post. If you are going to buy Alphacam, then why wouldn't you get one fr ...

    Re: Lacqure finish cracking over paint
    A message posted at WOODWEB's Finishing Forum (8/24) -- The more experienced worker is mixing the paints. I'll check and see how much of each they ar ...

    Re: Bed/bath door hinge and lock set jig
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/24) -- Jake, reread the above posts - the OP (Mike) asked for a lockset jig ...

    Re: Updated information on moulding/trim business needed
    A message posted at WOODWEB's Business and Management Forum (11/23) -- Hailey, I have attached my business email to my posting name for this one post ...

    Re: New Woodweb design
    A message posted at WOODWEB's Business and Management Forum (9/23/21) -- Being able to edit posts is a pretty big deal I think. I would not underesti ...

    Re: CAD / CAM Question
    A message posted at WOODWEB's CNC Forum (3/23) -- I second Alphacam,,,,,I ve ,,been an installer for a few years now,,after an install is pot on to t ...

    Re: Microvellum Post Processor Toolfile Help
    A message posted at WOODWEB's CNC Forum (9/22) -- I agree with Gary. Call MV and let then do it. I don't understand what CJ is talking about. If you ...

    Re: Pattern Systems/Biesse Rover
    A message posted at WOODWEB's CNC Forum (9/22) -- Jim, morning, one correction, you do not need to add the .bpp to the the program for it to read..yo ...

    Re: Software vs Software
    A message posted at WOODWEB's CNC Forum (6/22/23) -- Nicholas, I have had a great experience with Cabinet Vision over the last 13 years. We purchased ...

    Re: New CNC offsetting approaching 90 degree corners
    A message posted at WOODWEB's CNC Forum (6/22) -- Interesting that a PostP would fix it. Our post doesn't show any speed change for corners. The mach ...

    Re: Alphacam Post Processor
    A message posted at WOODWEB's CAD Forum (6/22) -- if you still need the post call me 424-652-0563 ...

    Re: Post over Pre
    A message posted at WOODWEB's Finishing Forum (4/22) -- I stand corrected, David is right. What was I thinking. Magnamax, a softer finish (since it i ...

    Re: Fusion 360 post for Masterwood Router
    A message posted at WOODWEB's CNC Forum (3/22/22) -- Have you checked the Autodesk forums? A Google search brings up a number or related topics that ...

    Re: Laguna CNC
    A message posted at WOODWEB's CNC Forum (3/22) -- This is most likely a post processor issue. You could contact Laguna with your machine model and se ...

    Re: Post over Pre
    A message posted at WOODWEB's Finishing Forum (4/21) -- Definitely do the adhesion test. I know someone who did exactly what you are proposing and th ...

    Re: Powder post or Ambrosia?
    A message posted at WOODWEB's Sawing and Drying Forum (3/21) -- Beetle....which one??? BUT I'll guess Powder Post....That limb reminds me of hickory ...

    Re: Camworks Woodwop and Homag
    A message posted at WOODWEB's CNC Forum (3/21) -- camworks is fun,,the alphacam to woodwop post is near perfect,,, if you need cam works /post adjust ...

    Re: Alphacam Post Processor
    A message posted at WOODWEB's CAD Forum (12/20) -- So you have AlphaCAM? And you lack the correct postprocessor? The only good choice is to purchase ...

    Post processor Felder profitH08
    A message posted at WOODWEB's CNC Forum (7/19) -- Hi Does any one has a post for alpha cam We got Felder 5x10 format 4 profit H08 If you can share it ...

    Grinding to Axial Constant System for 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- Using a few DIAGRAMS, can someone give me the simple explanation of the Weinig Axi ...

    Drying SYP Timbers for Transport
    A message posted at WOODWEB's Sawing and Drying Forum (2/19/24) -- A customer in mid-Atlantic area (we are in south Georgia) is looking for 8"x8 ...

    Re: V Carve Post for Old Omnitech Selexx with Fanuc
    A message posted at WOODWEB's CAD Forum (12/18/22) -- Have you found a post for the sellex pal? I might have one. ...

    Re: V Carve Post for Old Omnitech Selexx with Fanuc
    A message posted at WOODWEB's CAD Forum (11/18/22) -- Message me and I will send you the email of my Anderson tech. He can get you the post or make i ...

    Re: Long time contributor passed away
    A message posted at WOODWEB's Cabinetmaking Forum (9/18) -- I am not sure if I have conversed with him here and cannot say I knew him personally but ...

    Re: Production box miter cutting
    A message posted at WOODWEB's Cabinetmaking Forum (7/18) -- "No it won't, reread Larry's post." I understand his post but can you explain w ...

    Re: alphacam program
    A message posted at WOODWEB's CNC Forum (1/18) -- Post processors are super easy,,i can easily create a VBA post for you,,, Chevy ...

    V Carve Post for Old Omnitech Selexx with Fanuc
    A message posted at WOODWEB's CAD Forum (11/17/22) -- I am looking for this post. the machine needs to be an older like 2008 Omnitech Selexx with ATC ...

    Re: Doing right by my employer
    A message posted at WOODWEB's Business and Management Forum (7/17) -- So, quick update. The neurologist I am seeing doesn't follow the dark room theo ...

    Cost-effective CNC melamine drawer boxes?
    A message posted at WOODWEB's CNC Forum (2/17) -- I posted the same thing at the cabinetmaking forum but am cross-posting here for maybe better repli ...

    Re: Furniture Beetle?
    A message posted at WOODWEB's Furniture Making Forum (2/17) -- I learned a hard lesson after building a nice gun case of "post oak". After ...

    Re: Alphacam Post Processor
    A message posted at WOODWEB's CNC Forum (1/17) -- I can write a vba post for you ,,, Let me know,,, ...

    Re: Post Cat Finish
    A message posted at WOODWEB's Architectural Woodworking Forum (3/16) -- We fill open grain like mahogany with a slurry of grain filler mixed with the ...

    Post Processor - SWOOD
    A message posted at WOODWEB's CNC Forum (1/16/23) -- Hey all! I'm looking for either documentation on SWOOD's CAM setup or someone that is experience ...

    New Mobile forums format
    A message posted at WOODWEB's WOODnetWORK Forum (11/15/21) -- Hi Woodweb users, You'll notice this forum is using our new "mobile friendly" ...

    Re: Fence Post Mill
    A message posted at WOODWEB's Value Added Wood Processing Forum (9/15) -- John, There is a mill on the scale you mention about 20 miles from me. I kn ...

    Post Cat over Linseed Oil
    A message posted at WOODWEB's Finishing Forum (7/14) -- I have a customer that wants a post cat lacquer sprayed over a linseed oil finish. Is there a ...

    Re: Recommendations on Hardwax oil finish on Millwork, Furniture and cabine
    A message posted at WOODWEB's Finishing Forum (5/14) -- Scott, you make me chuckle each post. Your posts read like advertisements. "The finishes ...

    Re: Help with Post processor
    A message posted at WOODWEB's CNC Forum (4/14/23) -- If you can't find Chevy there is a guy named Marek who posts occasionally that can help. Can als ...

    Help with Post processor
    A message posted at WOODWEB's CNC Forum (4/14/23) -- does anyone have contact for "Chevy" he write the alphacam post processor Please ...

    Re: COVID 19 aerosol protection boxes for Hospitals
    A message posted at WOODWEB's CNC Forum (4/14) -- Derek, thank you for posting the videos. I had no experience with plexi before watching them, but t ...

    Post Cat Lacquer vs. Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (3/14/22) -- I have experience spraying post cat lacquer, but have not used conversion varnish. Are the ...

    Re: software similar to woodwop for non-homag/weeke machine?
    A message posted at WOODWEB's CNC Forum (3/14) -- typically anderson gives out alphacam or mastercam with their machines,,,, alphacam has a very nice ...

    Post Cat Finish
    A message posted at WOODWEB's Architectural Woodworking Forum (3/14) -- I Use ML Campbell Krystal and DuraVar Plus on a regular basis. When I'm finis ...

    Re: My first solo project : a wooden bar ! (ash olive tree)
    A message posted at WOODWEB's Furniture Making Forum (1/14/23) -- @RichC "More information like; I am an apprentice in the original post would h ...

    Please! need some help
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (9/13) -- Post Response | Notify Me Of New Messages | A Note About Viruses ...

    Re: Entry-level CNC for Small (1-2 man) Shop
    A message posted at WOODWEB's CNC Forum (11/12) -- Guinea, you will receive numerous responses with conflicting information and points to consider. I ...

    Post processor for Schelling FL330 beam saw
    A message posted at WOODWEB's CNC Forum (8/12) -- Hello, I am writing a post processor for Schelling FL330/318 beam saw. Could someone provide sample ...

    Re: New residential shop
    A message posted at WOODWEB's Cabinetmaking Forum (4/12) -- Rich/Adam, There is no need for reading or research though an app may be handy for those ...

    Re: How hard/resistant should precat be?
    A message posted at WOODWEB's Finishing Forum (1/11) -- resurecting and old thread but to help other I think have solved my problem. After dozen of t ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (6/10) -- As always do as you feel is best. Be reminded that the four posts are held in by p ...

    Re: What CNC Nesting Software is everyone running?
    A message posted at WOODWEB's CAD Forum (6/10) -- I'm curious if the Original Poster has abandoned this post, and if not, what he has learned since t ...

    Re: CV over tinted vinyl primer
    A message posted at WOODWEB's Finishing Forum (6/8) -- You can use Krystal or the pigmented post catalyzed coatings (Resistant, Stealth, or Turino) o ...

    Re: Painted Cabinets
    A message posted at WOODWEB's Finishing Forum (2/8) -- Regarding brushing a catalyzed or post catalyzed coating, you can do that, meaning it's possib ...

    Post below - small to large commercial jobs
    A message posted at WOODWEB's Business and Management Forum (5/7) -- I didn't want to hijack the thread below, so I'm starting a new one. In there, p ...

    Hafele Kessebohmer Revo Corner Unit vs Rev-A-Shelf Pie Cut Lazy Susan or?
    A message posted at WOODWEB's Cabinetmaking Forum (2/7/25) -- I posted this on Reddit, but didn't get many responses, so I'm hoping to get a bit more ...

    Re: Shavings volume from 6 head moulder
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/7/25) -- Alan, In my last post, I posted a link to my website. Click the ...

    Re: white haze on refinished cabinet
    A message posted at WOODWEB's Finishing Forum (7/6) -- I know it was a post cat, but it doesn't make any difference, both precats and post-cats will ...

    Re: CAD / CAM Question
    A message posted at WOODWEB's CNC Forum (4/6) -- some basic questions what type of machine do you have,,,and what type of work do you do,,, if you st ...

    Re: I was right all along. Woodworking shop owner=%20lack of education+ horri
    A message posted at WOODWEB's Business and Management Forum (2/6) -- "ANYTHING before taking a good look at himself" Excellent advise. &quo ...

    chosing air assisted airless advice
    A message posted at WOODWEB's Finishing Forum (5/5) -- Hello, These are my applications: ML Champel Solvent base lacquers, Post catalyzed and pre cat ...

    Re: Post for Masterwood drill block and spindle
    A message posted at WOODWEB's CNC Forum (5/4/22) -- I'm sure MasterCAM can write a new post. If all you are looking for is coordinates make a square ...

    Re: V Carve Programmer Needed
    A message posted at WOODWEB's CAD Forum (7/3) -- no fires or lawsuits this week,,i have time for some work,,post it here or email me,,,let me know wh ...

    RIP Want Ads -- NOW where do I go for fresh blood?
    A message posted at WOODWEB's Business and Management Forum (4/3) -- I initially posted this to the CAD/CAM forum since I had been trawling through t ...

    Glue Line
    A message posted at WOODWEB's Adhesives Forum (2/3) -- I've seen a lot of posts here that mention the appearance of a glue line over time. I have alw ...

    Powder Post Beetles in Furniture?
    A message posted at sawdry (12/31) -- I recently had a customer contact me and say he thought a desk Quarter sawn Oak I built years ago had powder po ...

    Re: Mozaik
    A message posted at WOODWEB's CAD Forum (2/2) -- Thanks Richard, I just finished a session with the software rep from Enroute. He seems to know what ...

    Catalyzed finishes and toner
    A message posted at WOODWEB's Finishing Forum (12/1) -- Hello I would normaly ask this question to the manufacturer (mohawk here) but they seem to ta ...

    Re: Catalyzed finishes and toner
    A message posted at WOODWEB's Finishing Forum (12/1) -- I don't know if I'm understanding correctly Are you trying to get a "glaze" effect? ...

    Re: Alphacam
    A message posted at WOODWEB's CNC Forum (9/1) -- I would not assume and definitely verify the post first, it is not so hard to change it inadvertentl ...

    Re: Red Oak for Barn Siding
    A message posted at WOODWEB's Sawing and Drying Forum (7/1) -- Will the oak posts be in ground contact? If possible you might want to put them on con ...

    Re: Recommendations for Water Based Conversion Varnish for Restaurant Table
    A message posted at WOODWEB's Finishing Forum (5/1) -- If you want really good durability on restaurant tables in a WB product I think you need to fo ...

    Re: looking for a post and rail machine for hi volume and a treatment plant
    A message posted at WOODWEB's Value Added Wood Processing Forum (4/1) -- http://www.sawmillexchange.com/commerc.htm#Post%20&%20Rail I think this ...

    Re: Pre-bending HPL and hold the shape?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/1) -- We used to Post Form laminate doors and occasionally a top. The process i ...

    Re: CV burnishing/shiny spots
    A message posted at WOODWEB's Finishing Forum (12/31/24) -- We use ChemCraft Chem24 CV, 20 sheen. There doesn't have to be any cleaning product used. ...

    Re: 37 Custom, interior, single panel architectural doors needed
    A message posted at WOODWEB's Architectural Woodworking Forum (12/31/22) -- You can also post a "Seeking Services" ad for free at our Job E ...

    Re: Scaling High-end Residential Custom Shop
    A message posted at WOODWEB's Business and Management Forum (12/31) -- William, My point was this: it is extremely hard to make money in high end one ...

    Re: Door panels cracked
    A message posted at WOODWEB's Architectural Woodworking Forum (12/31) -- Oh John, you might want to search through David's previous posts on door mak ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/31) -- How could anyone doubt a poster named super steve? ...

    Re: Proper wages and classification
    A message posted at WOODWEB's Business and Management Forum (10/31/22) -- Beyond making them "aware" of all the aspects of the business in ...

    Re: chairs
    A message posted at WOODWEB's Furniture Making Forum (10/31) -- See this forum post. http://www.woodweb.com/forum_fdse_files/furniture/805940.html I ...

    Re: New Area St. George Utah
    A message posted at WOODWEB's Business and Management Forum (10/31) -- I guess I am trying to find out how to go about marketing & sales for a cu ...

    Re: New Area St. George Utah
    A message posted at WOODWEB's Business and Management Forum (10/31) -- I have no idea what your post is about. As for Salesmen or women, I like sales ...

    Re: Exterior Glue Failure - Part One!
    A message posted at WOODWEB's Architectural Woodworking Forum (10/31) -- So what I am learning from this post is that the glue you use is pivotal on ...

    Re: epoxy and spar varnish for wood counter?
    A message posted at WOODWEB's Finishing Forum (10/31) -- Do a couple sample boards. Polyurethane will likely need a good mechanical bond to hold on. ...

    Re: Problem with Vectric Aspire -- drill toolpath converted to pocket toolp
    A message posted at WOODWEB's CNC Forum (10/31) -- I agree with will the Vectric forum would be a better place to ask for help. Are you sure you are ...

    Re: loading 5 axis program to holzher cnc
    A message posted at WOODWEB's CNC Forum (10/31) -- I use alphacam to do our drawings, and I have been outputting finished product to NC Hops ad runni ...

    Re: Is Selling And Installing Rollout Shelves A Viable Business
    A message posted at WOODWEB's Business and Management Forum (10/31) -- Jordon, Offering roll-outs in conjunction with refacing/refinishing sounds ver ...

    Re: Unlicensed Contractors
    A message posted at WOODWEB's Business and Management Forum (10/31) -- We've all been down this road. You might want to help the client understand yo ...

    Re: EDGEBANDER GLUE
    A message posted at WOODWEB's Adhesives Forum (10/31) -- I dont mean to steal the thread but i did not find any place to post it else In anticipation ...

    Re: Shop employees start time
    A message posted at WOODWEB's Business and Management Forum (10/31) -- Good post to a common problem. Necessary rules: No one works alone, they must ...

    Re: Polishing CV finish
    A message posted at WOODWEB's Finishing Forum (10/31) -- I posted a 3 part series of the step by step process on a high gloss conference table I did ...

    Re: import .tpa into genesis question
    A message posted at WOODWEB's CNC Forum (10/31) -- Matthew, Not sure if you are still looking for an answer or not. The file type .tpa is not associa ...

    Flatline solvent flush, paint buildup
    A message posted at WOODWEB's Finishing Forum (8/31/23) -- We have a Makor S-One we purchased new about 1.5 years ago. Recently we've had persistent ...

    Re: It was hard decision, and we glad we took it
    A message posted at WOODWEB's CNC Forum (8/31/21) -- I'm with Jeff on this one. I've found Felder to be expensive and underwhelming. What I've seen o ...

    Re: What glue are they using?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/31/21) -- I appreciate all of the input. If I can find time to experiment with this ...

    Pressing Inside Curve
    A message posted at WOODWEB's Adhesives Forum (8/31) -- I have also posted this in the veneer section. I am having difficulty pressing an inside curv ...

    Re: CV Issue
    A message posted at WOODWEB's CAD Forum (8/31) -- Make sure the tool catalog in the post matches the tooling table in the machine Then make sure you ...

    Employee Compensation
    A message posted at WOODWEB's Business and Management Forum (8/31) -- I'm curious to know if our pay rates would be considered over/under/equal to co ...

    Re: Alphacam
    A message posted at WOODWEB's CNC Forum (8/31) -- Thanks for your response. Computer 2 was working fine at one time, so I assume it would have the co ...

    Re: Nice appliance specs
    A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- I had an old turquoise refrigerator once. It was so worn out that one day while eating lu ...

    Re: Paul Downs Book
    A message posted at WOODWEB's Business and Management Forum (8/31) -- HI Tim, Thanks for the kind words. As for the rest of the story, we're continui ...

    Re: Microvellum XML Files
    A message posted at WOODWEB's CAD Forum (7/31/25) -- Hi Gary, Thank you for your response, that sounds very intriguing! Can you tell me a little more ...

    Re: Pitfalls of buying custom CNC
    A message posted at WOODWEB's CNC Forum (7/31/23) -- As a tech that works on these CNC machines both in woodworking, and metal fabrication I have dea ...

    Re: Pitfalls of buying custom CNC
    A message posted at WOODWEB's CNC Forum (7/31/23) -- Guys, I'm not sure why everyone is ragging on Chinese machines. Yes, there's risk in doing this. ...

    Re: Can anyone write a post from Cabnetware 11 to WoodWop?
    A message posted at WOODWEB's CNC Forum (7/31/23) -- contact Eurosoft they have a link, not sure if it is for CabWare. By Phone: (919) 468-3003 Euros ...

    Re: Can anyone write a post from Cabnetware 11 to WoodWop?
    A message posted at WOODWEB's CNC Forum (7/31/23) -- Thanks, Dylan Bayliss! I've contacted Eurosoft to see if we can bridge the gap. Much appreciated ...

    Re: CNC-Cart
    A message posted at WOODWEB's CNC Forum (7/31) -- Mike, Thanks for posting the picture and the drawing for your parts cart. I made on a full 8' long ...

    Re: RE: Sawmill pillow block bearing
    A message posted at WOODWEB's Sawing and Drying Forum (7/31) -- You may also have a bearing that is not specked for your application. You may need a ...

    Re: Customer Ran Out of $$$
    A message posted at WOODWEB's Business and Management Forum (7/31) -- What I have done is to have them date the check for the day it is written and n ...

    Re: Offset door hinges
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/31) -- mastercabman? read the opening statement and then the question. then ...

    Re: Glue Overflow on my Edge Bander
    A message posted at WOODWEB's Cabinetmaking Forum (5/31/25) -- We have the same issue with the premelter on our Morbidelli bander. Happened once whil ...

    Re: How much does custom millwork cost?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/31/22) -- "More than you think" is the answer I give when asked. T ...

    Re: CNC Carving A Trunk
    A message posted at WOODWEB's Sawing and Drying Forum (5/31) -- Thanks David, I've got enough now to try to steer them in a direction. I hope I get t ...

    Re: Benz vs Techniks
    A message posted at WOODWEB's CNC Forum (5/31) -- I believe you need to have the actual c-axis installed . At least on my biesse it was a separate as ...

    Re: Cerused finishes
    A message posted at WOODWEB's Finishing Forum (5/31) -- i see i made a typo on a previous post.. should say " stays only in the grain " ...

    Re: Wood Cad Cam outline geometry constraint options needing elaboration
    A message posted at WOODWEB's CAD Forum (5/31) -- Some times at least I think I'm amusing. Not sure which version you have but your column display of ...

    Re: Omnitech Pal
    A message posted at WOODWEB's CNC Forum (5/31) -- Dear "AA," Free phone support is immediately available for your Omnitech CNC from Giben A ...

    Re: Wood Cad Cam outline geometry constraint options needing elaboration
    A message posted at WOODWEB's CAD Forum (5/31) -- I'm not certain about question 1 but your example shown takes us back to the "hitch" post ...

    Re: Improving Information Flow
    A message posted at WOODWEB's Business and Management Forum (5/31) -- HH, Re-read Joe's post. You will be far better off with an analog method using ...

    Re: Paint creep through internal grain lines
    A message posted at WOODWEB's Finishing Forum (3/31/25) -- Thanks Tom. Given your thoughts I'm trying one more thing with shellac this morning. I've ...

    Re: Shellac
    A message posted at WOODWEB's Finishing Forum (3/31/24) -- Certainly! Dewaxed shellac can indeed be used as a seal coat under pre/post catalyzed lacq ...

    Re: Wide belt sander drum repair
    A message posted at WOODWEB's Solid Wood Machining Forum (3/31/24) -- Would have been better to start a new post. The only people who will see this a ...

    Re: CNC Software Help..
    A message posted at WOODWEB's CNC Forum (3/31/24) -- Hi Mike, Thanks for the quick response, any help is always appreciated. Please don't take this t ...

    Re: CNC Software Help..
    A message posted at WOODWEB's CNC Forum (3/31/24) -- Hi Mike, Thanks for the quick response, any help is always appreciated. Please don't take this t ...

    Re: Water base stain on natural cherry
    A message posted at WOODWEB's Finishing Forum (3/31/23) -- I think I was misunderstood or I explained incorrectly. The house the tops are going in ha ...

    Re: Wide rails (doors/shutters)... Forked tenon or ?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/31/23) -- Titebond 3 has been problematic on exterior applications when exposed to h ...

    Re: CNC router recommendations for a small shop
    A message posted at WOODWEB's CNC Forum (3/31) -- Mark B. i had not seen the shop sapre before reading your post. Looks like a nice machine. How do y ...

    Re: fancy hinge mechanism
    A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- If you could post a drawing of what you are trying to accomplish we'd be more apt to give ...

    air control valve on cougar
    A message posted at WOODWEB's Finishing Forum (3/31) -- Sorry to make a new post out of my original , however Herb Johnson advised me how to replace ...

    Solid Acrylic Cabinet Doors
    A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- I am considering using solid acrylic cabinet doors for a new residential construction pro ...

    Re: Paying for Purchases from Machinery Exchange
    A message posted at WOODWEB's Business and Management Forum (3/31) -- We have done wire transfers through the bank a few times, or Paypal seems a sec ...

    Re: What is the best way to join wood for hollow posts?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- Thank you for the responses. I plan on using a rabbet-dado joint, and a lot o ...

    Re: What is the best way to join wood for hollow posts?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- Hello Harold We make a significant amount of columns, from solid wood to pvc ...

    Re: What is the best way to join wood for hollow posts?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- Some movement seems like a big understatement to me. Why no finish? I sure ho ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (3/31) -- The GlueLam beams work because they effectively negate each of the defects in the wood. You c ...

    Re: Curved benches
    A message posted at WOODWEB's Architectural Woodworking Forum (1/31/24) -- Fun to see this post come back to life. I'm sure everyone who participated ...

    Re: Panel Thickness
    A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- Hi David. First of all, I've got nothing but respect for you and have learned a lot over ...

    Re: App measure tools
    A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- Thanks Kip! Can you verify that your system has tighter tolerances than those that Pat ha ...

    Re: What happened?
    A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- One other thing occurs to me is the Kijiji effect. We live in a time you can post an add ...

    Re: Walnut- gray stain?
    A message posted at WOODWEB's Finishing Forum (1/31) -- To add to my above post and after zooming way in on the photo it may take a few more steps wi ...

    Re: Cabinets too red... need to go more brown?
    A message posted at WOODWEB's Finishing Forum (1/31) -- scuff sand.... mix 1/2 oz of Mohawk green NGR with 28 oz. of acetone and tone evenly every su ...

    Re: lubrication for extending dining table sliders
    A message posted at WOODWEB's Furniture Making Forum (1/31) -- my apologies. I should have said that its a metal sliders with what appears to be smal ...

    horizontal plank doors
    A message posted at WOODWEB's Architectural Woodworking Forum (1/31) -- I am looking to build interior 5 doors. They would like them to have horizont ...

    Re: starting small funiture shop
    A message posted at WOODWEB's Furniture Making Forum (1/31) -- Hey Hugh, Just thought I'd post a quick suggestion from my perspective. Maybe you migh ...

    Re: Drafter, hire for experience or potential?
    A message posted at WOODWEB's Business and Management Forum (1/31) -- Ptilbs, Your post brings an interesting question. Your comment about working &q ...

    Driliing speed/feed
    A message posted at WOODWEB's CNC Forum (1/31) -- Hi All Sort of in response to a post about a shopbot in another forum and my own curiosity, what ar ...

    Vacuum Pump for a 5x10 router
    A message posted at WOODWEB's CNC Forum (12/30/24) -- Hello. We recently got a shopsabre 510 with a v4 vacuum hold down. It works ok (could do with m ...

    Re: Still trying to figure out a good spoilboard configuration for my machi
    A message posted at WOODWEB's CNC Forum (12/30/22) -- Thanks for all your responses!! It seems a complex topic with many variables. I believe my tabl ...

    MDF and Agualente Plus Primer
    A message posted at WOODWEB's Finishing Forum (12/30) -- I have read many posts on priming MDF. I use MLC Agualente Primer and Agualente pigmented to ...

    Re: barn wood i.d.
    A message posted at WOODWEB's Sawing and Drying Forum (12/30) -- Well, none of the images you posted would be Chestnut, which is ring porous. Since i ...

    Re: Gift Shop Sign
    A message posted at WOODWEB's Solid Wood Machining Forum (12/30) -- Paul - this would be an excellent addition to WOODWEB's Project Gallery - please ...

    Re: Cement board mantle
    A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- Now now David. Not every mass produced 1980's era condo complex can be devel ...

    Re: Sanding between coats of CV
    A message posted at WOODWEB's Finishing Forum (12/30) -- I don't get overspray on the back side when I sit the door on a small post, if on anything e ...

    Re: warped veneered table leaf
    A message posted at WOODWEB's Veneer Forum (12/30) -- Can you post a photo? ...

    Fumed Eucalyptus Veneer
    A message posted at WOODWEB's Furniture Making Forum (12/30) -- I also posted this on the veneer page.This is the first time I've used this veneer wh ...

    Re: Door panels cracked
    A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- I look at these posts about outside doors because a lot can go wrong .In the ...

    Re: Starting Time
    A message posted at WOODWEB's Business and Management Forum (12/30) -- I have the hours that rich c. posted a pic of. With a wife who has a weird wor ...

    Re: Profile knife storage
    A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- Good Question I get this question at least once a month, I always give the s ...

    Import to Biesseworks from PYTHA
    A message posted at WOODWEB's CAD Forum (12/30) -- Hello. I have just started using PYTHA software for Rover Machine. I am currently using Biessework ...

    Re: software for designing 3D, 2D, Cutting lists and pricing
    A message posted at WOODWEB's Business and Management Forum (12/30) -- I assume when you say wardrobe, you are describing a free standing cabinet or ...

    Re: would you warranty this entrance door?
    A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- Joel, In the latest picture that you posted it looks like there is a black l ...

    Re: Cracking paint/caulk where crown meets ceiling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- I may post a more complete response soon but 1st step is to give the ...

    Re: Signs of a slowdown?
    A message posted at WOODWEB's Business and Management Forum (11/30/22) -- Here we are seeing commercial projects coming up way short on bidding as co ...

    Re: Saw Blade Sharpening/Washing
    A message posted at WOODWEB's Architectural Woodworking Forum (11/30) -- I am amazed by how long carbide blades keep cutting... Also, I'm always amaz ...

    Re: Solid wood drawers
    A message posted at WOODWEB's Cabinetmaking Forum (11/30) -- I don't want my last post to sound like I am coming off rude. I am just trying to think ...

    Re: Flooring through the moulder Face Up or Down?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/30) -- Aaron In response to your second post which I forgot to address. The operator sho ...

    Re: finishing dispute
    A message posted at WOODWEB's Finishing Forum (11/30) -- Hi Norm, can you post some photos ? ...

    Re: sharpening a card scraper
    A message posted at WOODWEB's Cabinetmaking Forum (11/30) -- I got it! I was trying too hard and I think I was rolling on too steep of an angle causi ...

    Re: White Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (11/30) -- I have used Aqua Prime in the past with several different solvent top coats,worked well with ...

    Re: KV 8092 Full Overlay pocket door
    A message posted at WOODWEB's Cabinetmaking Forum (10/30/24) -- Mike, The KV8091 gives you a 3/4" overlay. We used them once last fall. We cut a ...

    Re: So.....Covid? Election? Combination Thereof?
    A message posted at WOODWEB's Business and Management Forum (10/30) -- I know Ive said it before, and I know there are exceptions to every rule and f ...

    Re: Western Red Cedar Solvent Soluble Extractives??
    A message posted at WOODWEB's Finishing Forum (10/30) -- Correction: The bleeding or oozing of sap or pitch in pine is a different issue than the WRC ...

    Re: Western Red Cedar Solvent Soluble Extractives??
    A message posted at WOODWEB's Finishing Forum (10/30) -- The bleeding or oozing of sap or pitch in pine is a different issue than the WRC issue. The ...

    Re: wood kiln electric heater
    A message posted at WOODWEB's Sawing and Drying Forum (10/30) -- https://smile.amazon.com/gp/product/B011296704/ref ox_sc_sfl_title_3?ie UTF8&p s ...

    portable generators for onsite installs
    A message posted at WOODWEB's Cabinetmaking Forum (10/30) -- Hi Everyone, i posted this question on the cabinet install forum, but only got two respo ...

    Eco Steps Coatings (ESC)
    A message posted at WOODWEB's Finishing Forum (10/30) -- Does anyone have any experience with this brand/system. I heard about it through a post on h ...

    Re: Unlicensed Contractors
    A message posted at WOODWEB's Business and Management Forum (10/30) -- Randy Stone: I feel your pain. Part of the charm of the Woodweb is that it all ...

    Re: Unlicensed Contractors
    A message posted at WOODWEB's Business and Management Forum (10/30) -- Thanks all for your comments. And to Crazy Talk...you made me laugh and thats ...

    Re: Vanishing Act
    A message posted at WOODWEB's Architectural Woodworking Forum (9/30/23) -- Brutal that the new owners ride your coattails to open a shop that you bui ...

    Feed and speed questions
    A message posted at WOODWEB's CNC Forum (9/30/22) -- I have been messing with my feed speed and RPM. The machine came to us set up and I was unsure w ...

    Exterior door panel construction
    A message posted at WOODWEB's Architectural Woodworking Forum (9/30/21) -- Greetings. I am in a bit of a bind and am looking for input/advice on exte ...

    Re: Jointer Setup
    A message posted at WOODWEB's Solid Wood Machining Forum (9/30/21) -- machineseeker is a good place to start. Hammer is for hobbyist, dont use it for ...

    1/4” solid wood over and under mdf
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/30) -- I read some posts from awhile ago about laminating solid wood over a sub ...

    Time in bag for epoxy glued veneer
    A message posted at WOODWEB's Veneer Forum (9/30) -- I have experience using the vacuum bag for smaller pieces and use a cold press glue all of the t ...

    Unisaw Troubleshooting
    A message posted at WOODWEB's Cabinetmaking Forum (9/30) -- I recently purchase an older Delta Unisaw and need some troubleshooting assistance. We re ...

    Freelance SketchUp Guru needed!
    A message posted at WOODWEB's CAD Forum (9/30) -- uys, Not sure where to post this so I'll try here first. We are looking for a freelance SU guru to ...

    Re: Mixing Finish Brands
    A message posted at WOODWEB's Finishing Forum (9/30) -- Joe @ Folz - Chemcraft 24 topcoat is a post-catalyzed conversion varnish. It's important to u ...

    Re: Color matching with various stains
    A message posted at WOODWEB's Finishing Forum (9/30) -- I do feel your pain. I have used all of the above. Lately I have been working with Gemini coa ...

    Re: The need for outsourcing in the new economy
    A message posted at WOODWEB's Cabinetmaking Forum (9/30) -- We operate just like the poster JM. Again the bottleneck is the finishing.. When it comes ...

    Re: Spray gun shoots fluid only when trigger first pulled
    A message posted at WOODWEB's Finishing Forum (9/30) -- probably want to check the air valve stem that is locating under the triger, push it in and m ...

    Re: Freelance SketchUp Guru needed!
    A message posted at WOODWEB's CAD Forum (9/30) -- I have it posted on a SU forum but figured this would also be a good venue as it concerns woodworki ...

    Re: Freelance SketchUp Guru needed!
    A message posted at WOODWEB's CAD Forum (9/30) -- If you post this in the sketchup forum im sure you will get more than a few replies ...

    Re: Freelance SketchUp Guru needed!
    A message posted at WOODWEB's CAD Forum (9/30) -- This can be posted at WOODWEB's Job Exchange - just click on the link below. ...

    Re: step shaker cabinet doors
    A message posted at WOODWEB's Cabinetmaking Forum (9/30) -- Cope & stick on your shapers. Outside tooling supplier if you aren't setup to make. I ...

    Re: Mesquite insects and treatment
    A message posted at WOODWEB's Furniture Making Forum (9/30) -- It is likely that these are the lyctid powder post beetles. They can live in the wood ...

    Re: Glazing large flat areas
    A message posted at WOODWEB's Finishing Forum (9/30) -- If you are making up your own glaze, will you post the ingredients ? ...

    Re: Morbidelli CNC Nested base router - Buy or not Buy?
    A message posted at WOODWEB's CNC Forum (9/30) -- i don't know about some posters but i am not a salesman for anyone but Deas Millwork. I can also on ...

    Framing w/P.T. Lumber
    A message posted at WOODWEB's WOODnetWORK Forum (9/30) -- Hoping I posted this in the correct form... Would like to frame a small shed wall with p.t. ...

    Re: Making authoritative paint samples
    A message posted at WOODWEB's Finishing Forum (8/30/21) -- OOPPSS.!! MY BAD.... in speaking of the earth pigments and such I left out a few just as i ...

    Automotive finish on wood
    A message posted at WOODWEB's Finishing Forum (8/30/21) -- Several years ago a customer wanted me to shoot a PPG automotive product on some of his br ...

    Re: Any have a clue as to what species this is?
    A message posted at WOODWEB's Cabinetmaking Forum (8/30/21) -- Thanks Tony. Pretty much figured the rotary cut just from the copy cat moving grain pa ...

    Re: Making authoritative paint samples
    A message posted at WOODWEB's Finishing Forum (8/30/21) -- Thank you Jim, won't be posting often, only on things which catch my eye that feel I can b ...

    Re: Making authoritative paint samples
    A message posted at WOODWEB's Finishing Forum (8/30/21) -- Chemmy I so much enjoyed your insightful posts from long ago. While we have never met....a ...

    Nesting CAM
    A message posted at WOODWEB's CNC Forum (8/30) -- Good afternoon. The time has come to upgrade my nesting/CAM software. I'd like the ability to nest ...

    Sawing and drying shingles
    A message posted at WOODWEB's Sawing and Drying Forum (8/30) -- Hi everyone, this is my first post to the sawing and drying forum. I have a Norwood 2 ...

    Re: Shop layout help
    A message posted at WOODWEB's Cabinetmaking Forum (8/30) -- To add to my post. If you have bought the slider I would next buy an edgebander and learn ...

    Re: Please help a newbie by recommending the correct router bit
    A message posted at WOODWEB's Architectural Woodworking Forum (8/30) -- You might find an alternative productive source of info. in the Canadian WWin ...

    Re: How to Handle A Woody?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/30) -- The car I'm looking at is the same look as the one I posted. It may be the sa ...

    Re: Carpenter bees & dried hardwood storage
    A message posted at WOODWEB's Sawing and Drying Forum (8/30) -- I'd worry more about powder post beetle. ...

    Re: determining wood species?
    A message posted at WOODWEB's Sawing and Drying Forum (8/30) -- My question is, "Does the species really matter?" You will be selling it as ...

    Re: Alphacam
    A message posted at WOODWEB's CNC Forum (8/30) -- Sounds like you have the wrong post selected in computer 2. ...

    Re: MDF or Domestic shop maple ply for veneer substrate?
    A message posted at WOODWEB's Veneer Forum (8/30) -- ML, you make some interesting points and the term "high-end" is certainly a tricky one ...

    Aluminum corner bead small
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/30) -- I have a client wanting tons of white laminate boxes with some form o ...

    Re: Veneered exterior entry door
    A message posted at WOODWEB's Architectural Woodworking Forum (7/30/24) -- Thank you, David. I would be very curious to see the rest of your post. Ou ...

    Finding your niche
    A message posted at WOODWEB's Business and Management Forum (7/30) -- As it is getting harder to compete in the wood sector, I was wondering if you a ...

    Re: Change cut direction on a polyline in Alphacam.
    A message posted at WOODWEB's CAD Forum (7/30) -- was just about to post the file, but that sounds like an easy solution, thank you I'll try it ...

    Re: Customer Ran Out of $$$
    A message posted at WOODWEB's Business and Management Forum (7/30) -- Slam Dunk: Sorry to hear of your predicament. As Gary pointed out and Pat expou ...

    Re: Customer Ran Out of $$$
    A message posted at WOODWEB's Business and Management Forum (7/30) -- I think because you sold direct to the owner you have either 60 or 90 days to f ...

    Re: type of Router Bit
    A message posted at WOODWEB's Cabinetmaking Forum (7/30) -- Now, when using a standard quarter round bit, like in my first post, the required sanding ...

    Re: Customer Ran Out of $$$
    A message posted at WOODWEB's Business and Management Forum (7/30) -- Here is an update. He stopped by with a check, payment in full, but post dated ...

    Re: Exterior Door Panel Longevity
    A message posted at WOODWEB's Architectural Woodworking Forum (7/30) -- Great post! ...

    Re: Polished chrome, non mortise, ball tip cabinet hinges
    A message posted at WOODWEB's Cabinetmaking Forum (7/30) -- Thanks Edi! I ordered a pair to be sure they are what we are looking for. I will post aga ...

    Re: Millennials
    A message posted at WOODWEB's Business and Management Forum (7/30) -- I do know one thing about millenials. They just love to be the center of attent ...

    Re: RE: Tulip Wood
    A message posted at WOODWEB's Forestry Forum (7/30) -- Tulip poplar is an east coast tree. The wood rots with alacrity. It can be used for fence post ...

    Re: Kundig sander
    A message posted at WOODWEB's Solid Wood Machining Forum (7/30) -- I can help you figure it out. I did installs for them for awhile. The rubber bladd ...

    SCM multi head moulder information
    A message posted at WOODWEB's Solid Wood Machining Forum (6/30/24) -- Hi, first time posting so not sure if I am in the right section..... I have rec ...

    Re: cnc tool holders thread direction vs spindle rotation
    A message posted at WOODWEB's CNC Forum (6/30/23) -- Very interesting never seen this design, I'm new to the cnc world and have been researching tool ...

    What flavor edgebanding glue are you using?
    A message posted at WOODWEB's Cabinetmaking Forum (6/30/22) -- I posted this in the CNC forum and got crickets. So I'm reposting here. Hope that's ko ...

    Re: Exterior Door Finish Issues - Epifanes
    A message posted at WOODWEB's Architectural Woodworking Forum (6/30) -- The image that made me think of a spill was the close up in the 2nd picture o ...

    Re: Tangent Handrail
    A message posted at WOODWEB's Architectural Woodworking Forum (6/30) -- I'm unable to open your file. Perhaps you could just post it. I don't know wh ...

    Re: White streaks in Shellac
    A message posted at WOODWEB's Finishing Forum (6/30) -- Thanks again Rich! I read your really helpful post about controlling Shellac blush. Really ap ...

    Re: Rotting cedar
    A message posted at WOODWEB's Architectural Woodworking Forum (6/30) -- Adam, None of the "Old Growth" species that were great before seem ...

    Spray Booth Intake Size
    A message posted at WOODWEB's Finishing Forum (6/30) -- Hey guys, I am trying to find a calculation or whatever other method is used to figure out ho ...

    Re: Rotting cedar
    A message posted at WOODWEB's Architectural Woodworking Forum (6/30) -- I agree that WRCedar is not what it used to be, same as Redwood. Second growt ...

    Finish Room Treats
    A message posted at WOODWEB's Finishing Forum (6/30) -- Gun clean up This is awesome. I have been finding little treats hidden back in the finish roo ...

    Re: Rotting cedar
    A message posted at WOODWEB's Architectural Woodworking Forum (6/30) -- I agree with the comments above and will add this. The posts should not have ...

    Re: Nesting Cnc router question
    A message posted at WOODWEB's CNC Forum (6/30) -- Anthony, this question was recently posted and answered, a short search of recent threads will find ...

    Re: Too much Veneer
    A message posted at WOODWEB's Veneer Forum (6/30) -- Bob, you probably confirmed John S's suspicion when you wrote, "I believe they are the exam ...

    Re: Too much Veneer
    A message posted at WOODWEB's Veneer Forum (6/30) -- John, Thank you so much. You are exactly correct. What I have is what you have described. I am g ...

    Re: Machining profiled plinth block
    A message posted at WOODWEB's Cabinetmaking Forum (6/30) -- We would also do these on the shaper. Clamp up a stack and run the edges, Like in the vid ...

    Recommendations for cleaning spray equipment
    A message posted at WOODWEB's Finishing Forum (5/30/25) -- We typically spray pre & post cat lacquers with our AAA spray rig. An upcoming job has ...

    Re: Bommer gate hinges
    A message posted at WOODWEB's Architectural Woodworking Forum (5/30/23) -- Hi, we are running into the same thing for court rooms. I need one more 71 ...

    Re: CNC Format
    A message posted at WOODWEB's CNC Forum (5/30/23) -- That's great, think i've found him on linkedin, i'll see if I can get in touch with him. I'll po ...

    Re: DRO operation instructions
    A message posted at WOODWEB's Cabinetmaking Forum (5/30) -- I can see that I wasn't very clear in my original post. I have the owners manual for the ...

    Access to Shop For Personal Projects Off-Hours
    A message posted at WOODWEB's Furniture Making Forum (5/30) -- Hello All, This is my first post. I think that reaching out to fellow furniture makers ...

    Re: spraying 2k poly
    A message posted at WOODWEB's Finishing Forum (5/30) -- I agree with with the previous post, start with a ,013. If your looking for a finer finish yo ...

    Re: spraying 2k poly
    A message posted at WOODWEB's Finishing Forum (5/30) -- PS; in my previous post if l wasn't clear l'm writing about using MLC Polarion as that is the ...

    Re: Parametric software for single parts
    A message posted at WOODWEB's CAD Forum (5/30) -- Thanks Richard. I have kcd s2m but am going to be using enroute for my onsrud router. Enroute can't ...

    Benz vs Techniks
    A message posted at WOODWEB's CNC Forum (5/30) -- So I am looking at adding an aggregate and C axis to my CNC and it appears that the Benz and Techni ...

    Re: ML Campbell Aguatana
    A message posted at WOODWEB's Finishing Forum (5/30) -- Yikes. Not the answer I wanted to hear. Was it the Aguatana product or that other post-cat st ...

    Re: Who do you call when you need a mentor?
    A message posted at WOODWEB's Business and Management Forum (5/30) -- I've been pondering the same thing....with 15 years in the industry, and over a ...

    Re: union scale in Chicago
    A message posted at WOODWEB's Business and Management Forum (5/30) -- D. Brown , We do educate our clients on using those kinds of shops and some lis ...

    Re: union scale in Chicago
    A message posted at WOODWEB's Business and Management Forum (5/30) -- "I appreciate all the input on unions,garage shop,etc. but I think we shou ...

    Re: union scale in Chicago
    A message posted at WOODWEB's Business and Management Forum (5/30) -- Mel, it really depends on what part of the country your in here. Mostly bigger ...

    Re: Marquetry knife---anyone do this craft?
    A message posted at WOODWEB's Cabinetmaking Forum (5/30) -- The link is for the American guy that is teaching the classic methods, and appears to be ...

    Re: Who do you call when you need a mentor?
    A message posted at WOODWEB's Business and Management Forum (5/30) -- Kay so I'm just going to go out on a limb and say it... I think that what is of ...

    Re: Your opinion please
    A message posted at WOODWEB's Business and Management Forum (5/30) -- Robert I would post the name of the auction company right here. This way they m ...

    Re: union scale in Chicago
    A message posted at WOODWEB's Business and Management Forum (5/30) -- I appreciate all the input on unions,garage shop,etc. but I think we should get ...

    Re: Rover A New Dust Hood moving parts
    A message posted at WOODWEB's CNC Forum (4/30/23) -- Same issue here. We use Cabinet Vision and I had them write the post so that the hood doesn't go ...

    Re: drawing help
    A message posted at WOODWEB's CNC Forum (4/30) -- What about your test piece does not match your model. I design and machine 3D parts every day here ...

    Re: Dispensing glue from a barrel
    A message posted at WOODWEB's Adhesives Forum (4/30) -- Mark B, I agree as well with having the glue come in the sealed bag the way box wine comes. I ...

    Re: Random rounding of corners.
    A message posted at WOODWEB's CNC Forum (4/30) -- In order to start to figure out the problem, You should find that program and post the code. Myself ...

    Re: first CNC router, where should my zero position be?
    A message posted at WOODWEB's CNC Forum (4/30) -- Sounds like an easy question, but not so much. What kind of machine? What software? Mine zeros at t ...

    Re: Sanded area on pre finished post
    A message posted at WOODWEB's Finishing Forum (4/30) -- The woodworker in me says that the plug was put in poorly. The installer then covered his tra ...

    Re: cnc accurecy
    A message posted at WOODWEB's CNC Forum (4/30) -- Since it worsens as the part gets longer its very likely due to rounding in the post processor as M ...

    Re: Dust collector on off switches
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/30) -- Any type of switch that can be set up to close the contacts when ...

    Re: Suitability of plastic dust barrels
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/30) -- Well, Jeff, this post and a couple of others originally sought ad ...

    Re: your recommendation for an automatic full-barrel shutoff
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/30) -- Mark: Wyoming and South Dakota are old stomping grounds of mine! ...

    Re: Passing of Gene Wengert - "The Wood Doctor"
    A message posted at WOODWEB's WOODnetWORK Forum (3/30/25) -- Dr. Wengert was always generous and respectful with his resopnses to posts on this forum ...

    CNC Software Help..
    A message posted at WOODWEB's CNC Forum (3/30/24) -- Hi folks, First time poster as I have just chanced upon this goldmine.. I started a business a c ...

    Re: CNC Software Help..
    A message posted at WOODWEB's CNC Forum (3/30/24) -- After reading your title, then your post, I still don't know what help you are asking for. Machi ...

    Re: AlphaCAM nesting
    A message posted at WOODWEB's CAD Forum (3/30) -- Barring a better idea, just write a VBA program to export each to an individual file. Let the pc do ...

    AlphaCam 2015 - RadNest Update
    A message posted at WOODWEB's CAD Forum (3/30) -- I've just arrived 2 weeks ago at my new job. They have no IT crew to work on the software. The guy ...

    Re: Suitable cnc for stairs
    A message posted at WOODWEB's CNC Forum (3/30) -- Thx, Are they capable of obscure stringer winder shapes and newel posts, or straight only? Are you ...

    Re: Easily removable label for melamine/formica?
    A message posted at WOODWEB's Adhesives Forum (3/30) -- You need to buy labels with a removable adhesive. If you have large volumes you can get custo ...

    Re: Cabnetware question
    A message posted at WOODWEB's CAD Forum (3/30) -- Version 14 is light years beyond Version 8. If you read each link that I will send you it will show ...

    Re: CAD/CAM software for medium sized commercial millwork shops
    A message posted at WOODWEB's CAD Forum (3/30) -- Hi Ryan, My advice is to use caution regarding what you read here about Microvellum. Some of the fo ...

    Re: cabnetworks 10.0 drawer issues
    A message posted at WOODWEB's CAD Forum (3/30) -- What build version are you using? Build 6252 was the final build for Version 10 Please see the abov ...

    Thick Veneer Bar Top
    A message posted at WOODWEB's Architectural Woodworking Forum (3/30) -- Last year I built a very large bar top out of solid 8/4 Zebra Wood - against ...

    Parts for SAC TS-120 Shaper?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/30) -- My apologies if I'm posting this question in the wrong forum, but I need an electr ...

    Re: What is the best way to join wood for hollow posts?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/30) -- I would think the miters would open. Maybe a rabbet joint or blind dado. ...

    Re: Split headboard
    A message posted at WOODWEB's Furniture Making Forum (3/30) -- The monthly change in OUTSIDE average humidity for San Francisco is very small, with a ...

    Re: Split headboard
    A message posted at WOODWEB's Furniture Making Forum (3/30) -- We are in Arizona and have done wood samples many times to measure expansion and contr ...

    Re: Looking for photo of a project posted a couple years ago
    A message posted at WOODWEB's Architectural Woodworking Forum (3/30) -- That's it, awesome work. Thanks for re-sharing ...

    Re: home made glue lam
    A message posted at WOODWEB's Adhesives Forum (3/30) -- all very good points,,,,, I was hoping an engineer would post here. I have engineered plans f ...

    Re: Raffix connectors for closet
    A message posted at WOODWEB's Cabinetmaking Forum (1/30/23) -- Derrek, if memory serves me, didn't you post a Youtube video on the chamfered Rafix id ...

    Re: I want a clearer edge. What I do wrong?
    A message posted at WOODWEB's CNC Forum (1/30/23) -- You would be better off to post the question on The Vectric forum this site has mostly industria ...

    Re: Festool is overrated
    A message posted at WOODWEB's Cabinetmaking Forum (1/30) -- I think it's funny when someone bad mouths festool and then all the festool owners get wo ...

    minimum dimension for roundwood structural timber
    A message posted at WOODWEB's Architectural Woodworking Forum (1/30) -- assistance sought from experienced individuals as to the feasibility of utili ...

    Re: MDF face frames
    A message posted at WOODWEB's Cabinetmaking Forum (1/30) -- Jonathan, edges do ding easier i find on mdf doors. i think most of the damages occur in ...

    Re: Any safety tips on switching to post-cat Polyurethane for cabinetry?
    A message posted at WOODWEB's Finishing Forum (1/30) -- Take a look at Alcea Coatings. They have an iso free catalyst. We switched to it about 6 mont ...

    Re: Any safety tips on switching to post-cat Polyurethane for cabinetry?
    A message posted at WOODWEB's Finishing Forum (1/30) -- Dar, Yes there are tint controlled whites and intermix clears for making any colors. Tint pas ...

    Perimeter wrap around figured Walnut
    A message posted at WOODWEB's Veneer Forum (1/30) -- I am getting ready to do a nice table top for a customer. It’s flat cut figured walnut with sap. ...

    Re: Profit Margin Rant
    A message posted at WOODWEB's Business and Management Forum (1/30) -- Remember that the markup is NOT all profit. They have to cover their rent, empl ...

    Plywood construction
    A message posted at WOODWEB's Cabinetmaking Forum (1/30) -- Hi everyone, I've been following woodweb for years but never posted. I gained a lot of in ...

    drills in mastercam
    A message posted at WOODWEB's CNC Forum (1/30) -- I am posting closets to a onsrud panel pro with master cam and if the is a piece with a cam hole in ...

    Re: Finish lifting and cracking
    A message posted at WOODWEB's Finishing Forum (12/29/23) -- Baby wipes?!?? Also could you post some pictures of the lifting? ...

    Re: New Foreman in Outdated Shop
    A message posted at WOODWEB's Business and Management Forum (12/29) -- Agreed on all points. If the one who signs the checks hasnt assigned you a bud ...

    Re: Employees per Gross Sales
    A message posted at WOODWEB's Business and Management Forum (12/29) -- Paul, Congratulations, it seems like your sales have almost doubled since 2012 ...

    Scaling High-end Residential Custom Shop
    A message posted at WOODWEB's Business and Management Forum (12/29) -- I don't post on here very often so this may be a well trodden path, but I thou ...

    Re: Frameless to face frame
    A message posted at WOODWEB's Cabinetmaking Forum (12/29) -- Mike, call me old school - but I'd take that look (in your photo) over a frameless look ...

    Re: Customer claiming termites
    A message posted at WOODWEB's Business and Management Forum (11/29) -- Are they sure it is termites? I had a powder post beetle incident years ago. T ...

    Re: Biesse Rover 24 or 23FT and Vcarve Pro
    A message posted at WOODWEB's CNC Forum (11/29) -- Hi Paul no I haven't purchased Vcarvre yet I want to make sure it works first and as far as Mozaik ...

    Re: pedestal table base size
    A message posted at WOODWEB's Furniture Making Forum (11/29) -- Your post really made me think @John! I'm really quite impressed with the solutions y ...

    Re: Biesse Rover 24 or 23FT and Vcarve Pro
    A message posted at WOODWEB's CNC Forum (11/29) -- Try Mozaik with the trial of Vcarve before you buy. You can't output to the machine but it seems l ...

    Re: Biesse Rover 24 or 23FT and Vcarve Pro
    A message posted at WOODWEB's CNC Forum (11/29) -- We run a Rover 30 FT with Cabinetvision. It's pretty liberating to watch the drills drop and then ...

    Re: First time wrking with reclaimed fir
    A message posted at WOODWEB's Furniture Making Forum (11/29) -- It looks like the wood was kind of put together from all sorts of different sources t ...

    Re: Green/Local Building
    A message posted at WOODWEB's Value Added Wood Processing Forum (11/29) -- I mentioned in my last post I spoke at urban wood workshops in San Francis ...

    Re: So.....Covid? Election? Combination Thereof?
    A message posted at WOODWEB's Business and Management Forum (10/29) -- David Sochar: I wonder if the attrition of woodworking shops due to the econom ...

    Re: Fusion 360 to Biesse Klever 1530
    A message posted at WOODWEB's CNC Forum (10/29) -- Thanks Dropout, As I said I am quite sure it is possible to use this multi drill head inside Fusio ...

    Re: Start over with your dream shop/business
    A message posted at WOODWEB's Business and Management Forum (10/29) -- Spencer Lewis is incredible, looked at the link you posted. ...

    Trimming contoured edgebanding
    A message posted at WOODWEB's Cabinetmaking Forum (10/29) -- I just posted about edgebanding contoured shapes but am also looking for a solution for ...

    Re: Face Frame Cabinet Construction
    A message posted at WOODWEB's Cabinetmaking Forum (10/29) -- I was about to make a similar comment when I saw your post Larry. Most customers don't k ...

    Re: expected life of kremlin tip
    A message posted at WOODWEB's Finishing Forum (10/29) -- no i mean there are tip cleaning needles that were mentioned in an above post, was just sayi ...

    Re: Best CAD /CAM for solid stock woodwork mfg
    A message posted at WOODWEB's CAD Forum (10/29) -- Is Rhino parametric? Topsolid is parametric and it made a world of difference. For example, we mad ...

    Re: Pressure pot for turbine?
    A message posted at WOODWEB's Finishing Forum (10/29) -- Just wanted to drop a line to say thanks to the people who posted to this thread. I bought a ...

    Re: tearout issues
    A message posted at WOODWEB's Solid Wood Machining Forum (10/29) -- Craig Great results from your test, good job! Those 12 degree hook angle cutter h ...

    Re: CNC Comparison
    A message posted at WOODWEB's CNC Forum (9/29/22) -- Sorry I have been away from this post for a couple weeks. I am down to 2 machines right now and ...

    Re: Graco mercur v kremlin
    A message posted at WOODWEB's Finishing Forum (9/29) -- Guys thanks so much for comments this has been huge help I’m going with mercur I think I will ...

    Re: Nice handicap flip up counter hardware
    A message posted at WOODWEB's Cabinetmaking Forum (9/29) -- Larry, Can you post a link to what you used? $1,200 is pretty costly. If the owner / GC a ...

    Re: Sample of Bill of material and costing to client
    A message posted at WOODWEB's Business and Management Forum (9/29) -- As others have stated, your markup and margin will be directly dependant on you ...

    Re: The need for outsourcing in the new economy
    A message posted at WOODWEB's Cabinetmaking Forum (9/29) -- Here is the problem with deciding to start outsourcing cabinet boxes......shops are alrea ...

    Re: Drying black locust
    A message posted at WOODWEB's Sawing and Drying Forum (9/29) -- Ken, I haven't sawn much locust, so I'm not expert. However, you should be able to se ...

    Re: Mixing Finish Brands
    A message posted at WOODWEB's Finishing Forum (9/29) -- As long as you understand the properties of the products you're using, the brand name on the ...

    Re: The need for outsourcing in the new economy
    A message posted at WOODWEB's Cabinetmaking Forum (9/29) -- I post as i want to read this further ...

    Re: adding value to walnut burls
    A message posted at WOODWEB's Value Added Wood Processing Forum (9/29) -- Isn't that always the trick? I've seen your ads and the burls you have are ...

    Re: A warning to newbies
    A message posted at WOODWEB's Business and Management Forum (8/29/21) -- Drew, Your post made me really think. I believe that your ability to recogni ...

    Re: Mirror shine high build
    A message posted at WOODWEB's Finishing Forum (8/29/21) -- We'll, this is my last on this post, though I started using polyester in 1980 I was not ha ...

    Re: Making authoritative paint samples
    A message posted at WOODWEB's Finishing Forum (8/29/21) -- Your welcome Robb, as an after thought, here is a little used insight, as to the type of c ...

    Re: A warning to newbies
    A message posted at WOODWEB's Business and Management Forum (8/29/21) -- Joel - I intend no disrespect towards you or anyone else. What I was stating ...

    Re: Modular table
    A message posted at WOODWEB's Architectural Woodworking Forum (8/29/21) -- With a public forum like this, you have no idea about the person asking th ...

    Re: Passing of a long time poster on the Woodweb
    A message posted at WOODWEB's Business and Management Forum (8/29/21) -- Wrote a lot of change orders that were accepted thanks to Alan. I was hoping ...

    Re: Mirror shine high build
    A message posted at WOODWEB's Finishing Forum (8/29/21) -- Thanks Jeff, I will only be posting on occasion, not like I used to, only on things that i ...

    Re: Passing of a long time poster on the Woodweb
    A message posted at WOODWEB's Business and Management Forum (8/29/21) -- He always had a great business minded response to whatever questions were as ...

    Re: Making authoritative paint samples
    A message posted at WOODWEB's Finishing Forum (8/29/21) -- Chemmy, Thanks for your input. Have missed your informative expert posts. Hope your well a ...

    Re: Mirror shine high build
    A message posted at WOODWEB's Finishing Forum (8/29/21) -- Chemmy, its so nice to read your posts again. ...

    Re: retarder names and crosslinking
    A message posted at WOODWEB's Finishing Forum (8/29) -- iv'e used Butyl Cellosolve in guradsman, lilly, seagraves, cambell,etc etc post cat products ...

    Re: How to Handle A Woody?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/29) -- David Sochar: Nice car, is that the actual car in question? I am not enough o ...

    Re: CNC Carving - SCM Pratix N
    A message posted at WOODWEB's CNC Forum (8/29) -- Once you transfer into Alphacam you should be able to use the 3d surface machining function in the ...

    Re: Toe kick cutting jig, four guys to use
    A message posted at WOODWEB's Cabinetmaking Forum (7/29) -- Four people involved and all the foot mileage is unsettling (Mark B's comments). All that ...

    Busellato Jet 200 RT
    A message posted at WOODWEB's CNC Forum (7/29) -- anybody with experience on a 2007 Busellato Jet 200 RT and cabinet visions 2012 on programming need ...

    How to check saw head calibration of Vertical Panel Saw
    A message posted at WOODWEB's Cabinetmaking Forum (7/29) -- In a recent post I had to troubleshoot problems with my VPS which caused panels to be cut ...

    Re: type of Router Bit
    A message posted at WOODWEB's Cabinetmaking Forum (7/29) -- First off, I would like to thank Shep for posting this question. There is a well-known “h ...

    Re: type of Router Bit
    A message posted at WOODWEB's Cabinetmaking Forum (7/29) -- Leo, I would have if you posted some pictures :-) Mark ...

    Blum Hinge 84.555
    A message posted at WOODWEB's Cabinetmaking Forum (7/29) -- Hello group. I need 56 new Blum 84.555 hinges for a kitchen re-face. Blum does not make t ...

    Re: Solar kiln : Leave Circulation fans on after sunset
    A message posted at WOODWEB's Sawing and Drying Forum (7/29) -- Thanks, Infact, we have had cloudy and now even rainy wether since my first post.... ...

    New CNC
    A message posted at WOODWEB's CNC Forum (6/29/24) -- New CNC, which is the company name. My name is John Bishop, been doing this a long time. I got s ...

    Re: Another spray painting question
    A message posted at WOODWEB's Finishing Forum (6/29) -- Hi Mastercabman No, I'm saying I used to use the Fuji, a standard sized gun than the Iwata, a ...

    Re: Another spray painting question
    A message posted at WOODWEB's Finishing Forum (6/29) -- Maplehead Sorry but in your other post you mentioned that you are using a minigun from Iwata ...

    Re: Grooved pull in painted mdf door
    A message posted at WOODWEB's Cabinetmaking Forum (6/29) -- CNC I'd just plow out the bulk of the hole then leads with a tool similar to what Leo pos ...

    Re: Kremlin vs HVLP Finish Quality
    A message posted at WOODWEB's Finishing Forum (6/29) -- Spraying for almost fifty years now. I still have maybe five or six Banks Model 7 guns. Learn ...

    Re: Sales Slump/Tire Kicker Blues -- What Gives?
    A message posted at WOODWEB's Cabinetmaking Forum (6/29) -- Franks post is wonderful but it doesnt happen that way in every market. You must be in th ...

    Re: 3m acryl putty
    A message posted at WOODWEB's Finishing Forum (6/29) -- Thanks, everything seems to check out. This stuff is great for very small defects, but too mu ...

    Re: Pocket Holes
    A message posted at WOODWEB's Cabinetmaking Forum (6/29) -- Nice work posted - the good design is foremost. I do not wish to argue, but we each have ...

    Re: Microvellum issues/optional software
    A message posted at WOODWEB's CAD Forum (6/29) -- Very interesting forum. We've been Toolbox users since 04-05 and have not looked back (until more r ...

    Re: Software to take orders, buy materials, track sales and expenses etc.
    A message posted at WOODWEB's Business and Management Forum (6/29) -- Hi Noah, There's some good responses to this question in the post related to in ...

    Re: Excel fraction w/ "
    A message posted at WOODWEB's WOODnetWORK Forum (6/29) -- I suspect the heart of the question is the "inch" sign as vs. formatting a cell t ...

    Re: Machining profiled plinth block
    A message posted at WOODWEB's Cabinetmaking Forum (6/29) -- Bob, When I first saw your post this morning, I immediately thought of this, but it took ...

    Re: DRO operation instructions
    A message posted at WOODWEB's Cabinetmaking Forum (5/29) -- Hey David, why don't you post the model Number, could help track down the manual. And tha ...

    Re: Technical advice for an arc cut of large radius
    A message posted at WOODWEB's Furniture Making Forum (5/29) -- Tom Gardiner: It is not mean spirited at all. If I had a CNC, and were versed in its u ...

    Re: CabinetVision VS Mozaik
    A message posted at WOODWEB's CAD Forum (5/29) -- You'll lay out $30,000, give or take, to CV and have to pay a couple grand a year to maintain it. T ...

    Re: Technical advice for an arc cut of large radius
    A message posted at WOODWEB's Furniture Making Forum (5/29) -- Tony - I offered the cnc suggestion not because I have lost all of my hand skills or d ...

    Re: Sliding table saw vs CNC
    A message posted at WOODWEB's Cabinetmaking Forum (5/29) -- So many good advises, so many different experiences :) Thank you all for your valuable in ...

    Re: Looking for tooling recommendations for CNC router
    A message posted at WOODWEB's CNC Forum (5/29) -- Larry, Wow thanks for that informative post. Definitely will check out LMT Onsrud. We did not get a ...

    Re: Parametric software for single parts
    A message posted at WOODWEB's CAD Forum (5/29) -- Hi Mike, Never tried this software before but it looks like it will create parametric DXF files tha ...

    Re: a show of hands...
    A message posted at WOODWEB's CAD Forum (5/29) -- Brian, Thanks for your post. We are looking at microvellum but as one of the most expensive we are ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/29) -- I would call Freeborn and ask about the T-alloy. My experience has been only hss steel an ...

    Re: Anyone else with MLC's Resistant problems???
    A message posted at WOODWEB's Finishing Forum (5/29) -- We have had a problem with white off the shelf and clear base tinted a reddish pink . We orde ...

    Re: Makita 2012NB vs Solid Wood
    A message posted at WOODWEB's Solid Wood Machining Forum (5/29) -- Please post the scientific name of what you are calling "ironwood". Hund ...

    Re: drilling cast iron shaper tables
    A message posted at WOODWEB's Solid Wood Machining Forum (4/29) -- Why not post a photo, pictures worth a thousand words. ...

    Re: Exterior Jamb& Threshold Detail?
    A message posted at WOODWEB's Architectural Woodworking Forum (4/29) -- I will post a pic showing the situation. Maybe this might explain a bit bette ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/29) -- cabmaker, I will agree with you on a few things. First, there is an environment ...

    "Overlay" Outside Corner Cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (4/29) -- I am working on designing a kitchen with "shaker" style full overlay maple door ...

    Re: Help! My draftsman is leaving!
    A message posted at WOODWEB's Business and Management Forum (4/29) -- Get some help in hurry Call Planit and get some training hours in Sit with your ...

    Re: "Overlay" Outside Corner Cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (4/29) -- I would not hinge a door on both sides. Make one side fixed, hinge the other. But if you ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/29) -- B.H. Davis, I've heard about the tilting hussey but have never seen one, woul ...

    Re: Sanded area on pre finished post
    A message posted at WOODWEB's Finishing Forum (4/29) -- Glue smears always show up clear or white. More likely a wipe down with a wet rag and swollen ...

    Re: Sanded area on pre finished post
    A message posted at WOODWEB's Finishing Forum (4/29) -- i agree with Dbrown it looks like putty residue or glue smear from gluing a plug in.It needs ...

    Re: Sanded area on pre finished post
    A message posted at WOODWEB's Finishing Forum (4/29) -- I would guess the stain is residue from the filler or putty used . ...

    Cumaru stairs
    A message posted at WOODWEB's Solid Wood Machining Forum (4/29) -- Hello, We made the exterior stair threads (3/4") from the pictures out of Cum ...

    Re: RE: Contracts for Woodworking Employees
    A message posted at WOODWEB's Business and Management Forum (3/29) -- Tommy, With the lack of woodworkers in today's world why would you want to put ...

    Re: Getting a Bonus
    A message posted at WOODWEB's Business and Management Forum (3/29) -- Well, Steve, thank you for admitting that virtually everything you said in your ...

    Re: CNC Reviews and Support
    A message posted at WOODWEB's CNC Forum (3/29) -- Ditto. Not trying to bash any company here, but the OP asked for "who has good customer servic ...

    Re: Oriental cabinet doors
    A message posted at WOODWEB's Furniture Making Forum (3/29) -- The photo posted by Michael shows a frame and panel door. I need to make a solid wood ...

    Re: Hardwood cut offs
    A message posted at WOODWEB's Value Added Wood Processing Forum (3/29) -- I keep seeing these posts about what to do with hardwood scraps - I've got ...

    Re: Fusion 360 Pros and Cons
    A message posted at WOODWEB's CNC Forum (2/29) -- Shop drawings are not a problem in cv, we actually get compliments regularly from architects, stati ...

    Re: Fusion 360 Pros and Cons
    A message posted at WOODWEB's CNC Forum (2/29) -- Pat, Cabinetmaker, I will keep you posted. I have 65k of work next month, all cabinets. 14k materia ...

    Re: Fusion 360 Pros and Cons
    A message posted at WOODWEB's CNC Forum (2/29) -- We struggle with a lot of post processing coming out of SU into Vcarve pro. Especially with curves. ...

    Re: Kremlin Cleaning
    A message posted at WOODWEB's Finishing Forum (2/29) -- Shane Welch, would you please post a picture of the polychem acrastrip container and who you ...

    Re: Microvellum pathway issue
    A message posted at WOODWEB's CAD Forum (2/29) -- "S:/" is our "share drive" where we store all of the files that everyone works ...

    Re: Anybody know where to source these?
    A message posted at WOODWEB's Cabinetmaking Forum (2/29) -- Actually I was thinking of a product called "Kitchen Rail System". It's offered ...

    Re: Storage: how to retard moisture change in plywood
    A message posted at WOODWEB's Cabinetmaking Forum (1/29/23) -- Please see the map below for average RH and MC for interior woodwork in various parts ...

    Re: Material price increases
    A message posted at WOODWEB's Business and Management Forum (1/29/22) -- I understand what your saying and I should have qualified that post deposit ...

    Re: Lemans corner 1" Thick Faceframe
    A message posted at WOODWEB's Cabinetmaking Forum (1/29) -- It would be really close. The issue is that the post mounts directly behind the face fram ...

    Re: Lemans corner 1" Thick Faceframe
    A message posted at WOODWEB's Cabinetmaking Forum (1/29) -- Hi Tyler, While I only build framless, so this is kindof a shot in the dark. If you dont ...

    Re: Any safety tips on switching to post-cat Polyurethane for cabinetry?
    A message posted at WOODWEB's Finishing Forum (1/29) -- For Kitchens I like Acrylic Urethane finish systems. The trend is a nice open pore right now ...

    Re: Any safety tips on switching to post-cat Polyurethane for cabinetry?
    A message posted at WOODWEB's Finishing Forum (1/29) -- bob, i, too, spray mostly 2k. i was told the iso's are most harmful in aerosol form, but thes ...

    Re: Any safety tips on switching to post-cat Polyurethane for cabinetry?
    A message posted at WOODWEB's Finishing Forum (1/29) -- This has been very helpful! Thank you all for contributing. I had been told before (and, I ha ...

    Re: Any safety tips on switching to post-cat Polyurethane for cabinetry?
    A message posted at WOODWEB's Finishing Forum (1/29) -- thanks bob , have used those products before, I should have ask about pigmented finishes beca ...

    Re: Any safety tips on switching to post-cat Polyurethane for cabinetry?
    A message posted at WOODWEB's Finishing Forum (1/29) -- bob I know you are a ICA guy which product do you use for kitchens and baths thanks ...

    Re: Holzher 1310 chain feed drive R&R
    A message posted at WOODWEB's Cabinetmaking Forum (1/29) -- I thought I would post back with the details on how to do this job in case someone needs ...

    Re: CMA members forum
    A message posted at WOODWEB's Business and Management Forum (1/29) -- Why not just post here and save a few hundred bucks a year? ...

    Re: Finishing pumps and guns
    A message posted at WOODWEB's Finishing Forum (1/29) -- try reading the original post. He is looking to upgrade to increase efficiency and speed. now ...

    Re: Still trying to figure out a good spoilboard configuration for my machi
    A message posted at WOODWEB's CNC Forum (12/28/22) -- Can you post a photo of your table? BH Davis ...

    Re: Spray Gun Recommendation
    A message posted at WOODWEB's Finishing Forum (12/28) -- As others have already mentioned, if this is a rare volume job, then your existing turbine a ...

    Re: Cabinet hinges,
    A message posted at WOODWEB's Cabinetmaking Forum (12/28) -- No looking at it again they might be package wrong.order the ones I posted and they shou ...

    Re: Cabinet hinges,
    A message posted at WOODWEB's Cabinetmaking Forum (12/28) -- Different hinges than the one I posted will be 1/2" o.l. ...

    Re: Looking for a high quality cabinet doors manufacturer
    A message posted at WOODWEB's Cabinetmaking Forum (12/28) -- Many thanks to all that posted, although I don't think a few didn't read what I was look ...

    Re: vacuum hose
    A message posted at WOODWEB's CNC Forum (12/28) -- We just buy ours from the manufacturer(Northwood) since they last so long. I think I have gone thr ...

    Re: 0 protrusion Consealed Inset Hinge???
    A message posted at WOODWEB's Cabinetmaking Forum (12/28) -- Thank you for that idea! Since this post, I came up with this cheap hinge. Simple design ...

    Re: Tipping Delivery Drivers?
    A message posted at WOODWEB's Business and Management Forum (12/28) -- So, dean, I guess the posting handle "Am I in a restaurant?" went ov ...

    Re: waterborne primer, anyone use Kilz Max?
    A message posted at WOODWEB's Finishing Forum (12/28) -- John, I clicked on the link you posted. According to what came up the primer is highly flamm ...

    Vertical cnc or skipper
    A message posted at WOODWEB's Cabinetmaking Forum (11/28) -- We are going to be increasing our capacity in our component company next year and I am l ...

    Re: cnc post
    A message posted at WOODWEB's CAD Forum (11/28) -- send me an E-mail I may be able to help you. dpcent@charter.net ...

    Re: finishing dispute
    A message posted at WOODWEB's Finishing Forum (11/28) -- In the Cabinet Shops I have worked in, the Cabinetmaker does a sanding of the completed cabi ...

    Re: Large Volume sanding "equipment" advice?
    A message posted at WOODWEB's Finishing Forum (11/28) -- Mr.Mosher I have greatly benifited from your previous posts as you have so openly shared fro ...

    Re: Large Volume sanding "equipment" advice?
    A message posted at WOODWEB's Finishing Forum (11/28) -- Jim If you are interested I think I still have 2 of the sanders you are talking about from y ...

    Re: Faulty bandsaw switch?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/28) -- I got 20 amps on each leg. When I bypassed the switch it fired up so it looks lik ...

    planers
    A message posted at WOODWEB's Solid Wood Machining Forum (11/28) -- We have a woodmizer sawmill and will be producing 20,000 bd ft of oak, aspen and ...

    Re: Start over with your dream shop/business
    A message posted at WOODWEB's Business and Management Forum (10/28) -- I am happy to post my numbers for everyone along with my contracts. Remember I ...

    Re: Veneering a Cylinder
    A message posted at WOODWEB's Architectural Woodworking Forum (10/28) -- Thanks all, I’ll keep you posted how it turns out. Kevin , believe me I woul ...

    Re: ilva velvet diamond issues
    A message posted at WOODWEB's Finishing Forum (10/28) -- temps - mid 60s with low humidity (30*ish) stain and glaze are mlc (local distribution). wip ...

    Re: Weinig Profimat 23
    A message posted at WOODWEB's Solid Wood Machining Forum (10/28) -- Hi Scott, I did the weinig training last March for a 8 head machine we purchased. ...

    Re: Ritter Line Borrer
    A message posted at WOODWEB's Architectural Woodworking Forum (10/28) -- Well Brian & Mitch, I have to eat my words since this forum does not all ...

    Cabinet Vision - Photo Vision renders
    A message posted at WOODWEB's CAD Forum (10/28) -- I am wondering if anyone can post some example pictures of real world renders / presentations they ...

    Re: Laser Projector accuracy for Parts/Pod Placement
    A message posted at WOODWEB's CNC Forum (9/28) -- SL Laser for positioning radius mouldings. Does an outstanding job and does not have the calibratio ...

    Re: Sample of Bill of material and costing to client
    A message posted at WOODWEB's Business and Management Forum (9/28) -- Never mind...mis read your post. ...

    The need for outsourcing in the new economy
    A message posted at WOODWEB's Cabinetmaking Forum (9/28) -- We have been a custom cabinet maker for about 12 years now. What I have been noticing in ...

    Re: The Death Of CabnetWare
    A message posted at WOODWEB's CAD Forum (9/28) -- James, it is locked right now. If I open it again I will post here and let those that have emailed ...

    Re: The Death Of CabnetWare
    A message posted at WOODWEB's CAD Forum (9/28) -- The above post has a bad link now so here is a new link for "What's New In Version 14" ...

    Re: burning saw dust
    A message posted at WOODWEB's Value Added Wood Processing Forum (9/28) -- Found the posting. This is a build blog of an automated DIY briquette press ...

    Re: Full overlay pocket door hardware
    A message posted at WOODWEB's Cabinetmaking Forum (8/28/24) -- Hi Matt, Sorry, I overlooked that detail in your post. At this time, 51" is the m ...

    Artcam/Carveco Post Processor
    A message posted at WOODWEB's CNC Forum (8/28/24) -- Does anyone have an Artcam/Carveco Post Processor for a Biesse Rover A 1536 GFT. None of the bui ...

    Re: Switching to Waterbase
    A message posted at WOODWEB's Finishing Forum (8/28/22) -- Saw your post surprised no answers Back in the late 90's worked with Polyester using Ziol ...

    Re: Gouge size and log rolling
    A message posted at WOODWEB's Cabinetmaking Forum (8/28/21) -- Ok, thank you for the direction. I post on a number of forums and forgot where I was f ...

    Re: Post Processor for Biesse FTT R8
    A message posted at WOODWEB's CNC Forum (8/28) -- Just watched a video of that machine. I understand why they don't want to know about it. Maybe http ...

    Post Processor for Biesse FTT R8
    A message posted at WOODWEB's CNC Forum (8/28) -- Good morning, Does anyone have a ALPHACAM Post Processor for a Biesse FTT R8 CNC ? I am having a ha ...

    Re: What equipment do I need to make solid wood cabinet doors in-house?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/28) -- my thought along time ago we had multiple shapers you should consider a Martin sha ...

    Re: Online Marketing
    A message posted at WOODWEB's Business and Management Forum (8/28) -- Hello Mark, My first question is who is your target audience? Furniture is an o ...

    Re: Tool bags
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/28) -- Thanks Kip I never would have thought of that. Which is why I made th ...

    Re: Mozaik?
    A message posted at WOODWEB's CAD Forum (8/28) -- I use mozaik now. If you need help in any kind of a hurry then you have to pay a trainer. I have se ...

    Re: Green White Oak
    A message posted at WOODWEB's Architectural Woodworking Forum (8/28) -- I also wonder if the kiln drying could affect the color of the oak. I probabl ...

    Re: cabinet software shopping...
    A message posted at WOODWEB's Cabinetmaking Forum (8/28) -- Hey Karl, Cabinet Pro is only around 3K for design, cut-list, bidding and optimization I ...

    Re: CNC Carving - SCM Pratix N
    A message posted at WOODWEB's CNC Forum (8/28) -- I have Aspire for alphacam and was a little surprised by this as well! they didn't explain this to ...

    Re: Cabinet design software
    A message posted at WOODWEB's CAD Forum (8/28) -- I would add a +1 for Cabinetsense that Dropout posted. I know there are a lot of sketchup skeptics ...

    Re: Teak Talk
    A message posted at WOODWEB's Forestry Forum (8/28) -- I thought the original poster was looking for a cheering-up. Now I'm depressed. Richard made a ...

    Hopper for kremlin
    A message posted at WOODWEB's Finishing Forum (7/28/22) -- I have always had the intake tubes for all of my airmix pumps. Now I am spraying post cat ...

    Re: Foreman uses the Buddy System
    A message posted at WOODWEB's Business and Management Forum (7/28) -- Mauricio, It seems you answered your first post by yourself from what you have ...

    Re: Best way to repair?
    A message posted at WOODWEB's Finishing Forum (7/28) -- If someone stuffed a bunch of caulk in the crack it's all over folks. Nothing to be done but ...

    Re: Drying Black Spruce dead straight
    A message posted at WOODWEB's Sawing and Drying Forum (7/28) -- I believe that this time, I've got it! Your latest post was what really made it clear ...

    Re: Exterior Wood Door Questions
    A message posted at WOODWEB's Architectural Woodworking Forum (7/28) -- I can't seem to post more than one picture. What's the secret double handshak ...

    Re: Customer Ran Out of $$$
    A message posted at WOODWEB's Business and Management Forum (7/28) -- Generally in a commercial the building owner posts a notice of non responsibili ...

    Re: CNT Motion Series 1000 CNC Router
    A message posted at WOODWEB's CNC Forum (7/28) -- CMI, I would like to post your message and my reply on Woodweb. You responded: “Call Paul at CNT we ...

    Microvellum DOC Sequence
    A message posted at WOODWEB's CNC Forum (7/28) -- Even though I've now been using Microvellum for about 3 yrs I still consider myself somewhat green ...

    Re: Entering the entry door Business
    A message posted at WOODWEB's Architectural Woodworking Forum (7/28) -- My first response to anyone wanting to make money making doors is to chase th ...

    Design software
    A message posted at WOODWEB's Business and Management Forum (6/28/23) -- Hi all. Long time lurker first time poster. Looking for some insight into de ...

    Re: Sanding square Cabinet Door Edges
    A message posted at WOODWEB's Cabinetmaking Forum (6/28/23) -- RichC: Mr Fee, "how hard do you push?" Is there really an answer to that que ...

    Re: AlphaCam Suddenly Stopped Working
    A message posted at WOODWEB's CAD Forum (6/28/23) -- i run a small shop and when i spend 15k + 2500.00 for an alpha-cam post, and i don't hear back f ...

    Re: CNC Purchase
    A message posted at WOODWEB's CNC Forum (6/28/23) -- Dropout, many thanx, i connected the Chevy and was able to reach out to Marek for the post proce ...

    Painting wet pressure treated
    A message posted at WOODWEB's Finishing Forum (6/28/22) -- I’m installing a fence and would like to paint it but it’s wet pressure treated. I can wai ...

    Re: Shop layout help
    A message posted at WOODWEB's Cabinetmaking Forum (6/28) -- Since I first posted my shop layout question I’ve done a lot of research on CNC machines. ...

    Re: Best bit style for panel sizing
    A message posted at WOODWEB's CNC Forum (6/28) -- Dropout, Some good advice here. The only time I've seen people go to the P2P after the saw for a pe ...

    Re: Batch Rotating DXF files
    A message posted at WOODWEB's CAD Forum (6/28) -- Thanks Gary. I had a look at the link you posted. Does look like Lisp would be the way to go. Howev ...

    Re: 16"/20" 4 post import planers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/28) -- I'm guessing the rollers idea came out of the marketing department, Harold. Thanks ...

    Re: Scientific Management of High-Variety, Complex Production
    A message posted at WOODWEB's Business and Management Forum (6/28) -- Prasad -- I am looking forward to sitting down with your article for a careful ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/28) -- "There may be things in play that you are not aware of or that maybe you m ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/28) -- Wow...this thread has really turned and twisted since I wanted to post some day ...

    Re: 2024-2025 Cabinet installer pricing
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/28/25) -- This aligns with some regional rates but is on the lower end. In C ...

    Re: making 6x6 fence posts
    A message posted at WOODWEB's Sawing and Drying Forum (5/28) -- the whole fence is using 6” profiles(the 5/4x6 hemlock horizontals have been stacked ...

    Re: Machinery support/service
    A message posted at WOODWEB's Business and Management Forum (5/28) -- Sorry I can't help as I'm in San Diego, but I thought I'd add my experience her ...

    Mixer lift success anyone?
    A message posted at WOODWEB's Cabinetmaking Forum (5/28) -- I saw the recent post about mixer lifts that was mostly critical Has anyone installed one ...

    Re: Wide belt contact drum recover
    A message posted at WOODWEB's Solid Wood Machining Forum (5/28) -- The contact drum must be lower than the idler roller. You don't want the contact r ...

    Re: If you were to do it all over again?
    A message posted at WOODWEB's WOODnetWORK Forum (5/28) -- A very interesting thread to a very important question. Something I have been pondering sin ...

    Re: CNC Purchase
    A message posted at WOODWEB's CNC Forum (4/28/22) -- Chris, A colleague of mine sent me your post and I wanted to reach out to you to discuss our Mor ...

    Re: Operating vac pumps remotely
    A message posted at WOODWEB's CNC Forum (4/28/22) -- Great post! Similar to the setup we did on our machine. Just used 3" steel pipe and only fl ...

    Re: Vectric Aspire in Rhode Island
    A message posted at WOODWEB's CNC Forum (4/28) -- What CNC do you have you can download a working trial to see if your machine has a post processor a ...

    Re: Kremlin tip selection for waterborne Chemcraft?
    A message posted at WOODWEB's Finishing Forum (4/28) -- I spray 20deg mono/ bi component clear. pigmented primer and pigmented lacquer we spray post ...

    Re: End grain to edge butt joint strength
    A message posted at WOODWEB's Cabinetmaking Forum (4/28) -- When the paint cracks at the joint, it's not usually because of any problems with the str ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/28) -- Tyler, I never bought the Micron because I felt it took the one downside of r ...

    Re: Weinig Powermat
    A message posted at WOODWEB's Solid Wood Machining Forum (4/28) -- Bill This is just my opinion, and we all know what they say about opinions. I woul ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/28) -- Thank you for posting david. B.H. What drove you to make a tilting head willi ...

    Re: Sanded area on pre finished post
    A message posted at WOODWEB's Finishing Forum (4/28) -- I'd suspect the original was sanded to 220, the patch to 150. Giving two colors. ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/28) -- Sounds like we are on the same page. Those last posts were ambiguous. ...

    Re: Inventor for Casework
    A message posted at WOODWEB's CAD Forum (4/28) -- Hi Jason, I agree with you. I currently work for an Architectural Millwork Co. hell bent on using I ...

    Re: The Death Of CabnetWare
    A message posted at WOODWEB's CAD Forum (4/28) -- Hi Jim, I saw your post here and just wanted to take a moment to say "Thanks" for all the ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (4/28) -- Woah! How did this get so nasty so fast? It is not my video indeed. I posted it wi ...

    Plants to plant to discourage insects
    A message posted at WOODWEB's Sawing and Drying Forum (4/28) -- Is there a plant such as rosemary, lavender, etc. that I can plant around my lumber y ...

    Re: Cabinet vision tool operation
    A message posted at WOODWEB's CAD Forum (4/28) -- It selects the bit for an operation you added, or for the outline tool? It won't automatically pick ...

    Re: Not much activity here ............
    A message posted at WOODWEB's Value Added Wood Processing Forum (4/28) -- I think the reason this forum is dead, is because of the nature of the foru ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/28/22) -- The devil for sure (and also the solution) is often in the detail. : ) I spent some years ...

    Re: Wide Belt sander platen material
    A message posted at WOODWEB's Solid Wood Machining Forum (3/28/22) -- Got a pic of the platen you can post? You can always switch out the felt for ph ...

    Re: precat buildup?
    A message posted at WOODWEB's Finishing Forum (3/28) -- A 513 tip should be fine, I think you're dealing with a reduction/thinner issue. Having spray ...

    ML Campbell Pigmented Post-Cats?
    A message posted at WOODWEB's Finishing Forum (3/28) -- ML Campbell has at least 3 pigmented post-catalyzed topcoats. These products seem to offer si ...

    Re: Stain issues
    A message posted at WOODWEB's Finishing Forum (3/28) -- Ok, that makes more sense to me, when I first read your post it almost sounded like you spray ...

    Re: Tinting Sherwood Sealer T67F3
    A message posted at WOODWEB's Finishing Forum (3/28) -- Wait, after re-reading your last post, Shane, I have a question: Are you meaning I want to us ...

    Re: Tinting Sherwood Sealer T67F3
    A message posted at WOODWEB's Finishing Forum (3/28) -- i must have posted at the same time as shane. Funny how similar our approaches would be ...

    Re: CNC Reviews and Support
    A message posted at WOODWEB's CNC Forum (3/28) -- Rob- We need to stay on topic. The posters are speaking truths. I have had my issues with Biesse in ...

    23 gauge nail guns jaming
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/28) -- Looking for advice about 23 gauge nail guns jaming. I have a grex, ca ...

    Re: CNC Reviews and Support
    A message posted at WOODWEB's CNC Forum (3/28) -- "you have to keep in mind where these comments are coming from on a Forum" Yes you do.... ...

    Re: Insulated Glass spacer blocks
    A message posted at WOODWEB's Architectural Woodworking Forum (3/28) -- Mark, Thank you for posting. I wish your company were closer to Colorado. We ...

    Re: Domino df 700
    A message posted at WOODWEB's Architectural Woodworking Forum (3/28) -- I am not a Festool acolyte I think much of their stuff is overpriced and over ...

    Re: CUT LISTING
    A message posted at WOODWEB's CAD Forum (3/28) -- As a Microvellum user for years I agree with the previous post. Microvellum is powerful. Yes if all ...

    Re: Custom Run's - Various questions - input
    A message posted at WOODWEB's Solid Wood Machining Forum (3/28) -- Bruce, I agree with you about the questions. Its a great topic in my opinion and e ...

    Re: Hemisphere shelf
    A message posted at WOODWEB's CNC Forum (2/28/23) -- Oops, I didn't see that watsan advertisement stuck to the spam post. ...

    Re: Hidden structural connector steel to wood
    A message posted at WOODWEB's Furniture Making Forum (2/28/22) -- Thanks Tony, Your outline is pretty much exactly where we are at with it at the mom ...

    Re: Straight line rip saw
    A message posted at WOODWEB's Solid Wood Machining Forum (2/28) -- And I did research the knowledge base before my 1st post but there was nothing abo ...

    Re: Kremlin Cleaning
    A message posted at WOODWEB's Finishing Forum (2/28) -- Shane Welch, excellent Kremlin cleaning video!!! Fast and easy and I like the way that you ve ...

    Re: Kremlin Cleaning
    A message posted at WOODWEB's Finishing Forum (2/28) -- Shane Welch, please post a link to your cleaning video. I'm always looking for good info. Tha ...

    Re: Kremlin Cleaning
    A message posted at WOODWEB's Finishing Forum (2/28) -- gimme a few minutes and i'll post the link..... i'm not an expert speaker...lol ...

    Upper back pain
    A message posted at WOODWEB's Finishing Forum (2/28) -- Im only posting this here because I'm almost certain my issue is from finishing. I have been ...

    Re: How do I achieve this look
    A message posted at WOODWEB's Finishing Forum (2/28) -- PS; I just noticed this is a repair job (I really should read posts all the way through befor ...

    Re: Restaurant Table Top
    A message posted at WOODWEB's Furniture Making Forum (2/28) -- Reread the original posting. I love it, "I've never made restaurant style tables ...

    Re: correct primer under pigmented water based Lacquer?
    A message posted at WOODWEB's Finishing Forum (2/28) -- Thanks everyone for the posts. I'm headed back to SW for more material and I'll ask about the ...

    Re: correct primer under pigmented water based Lacquer?
    A message posted at WOODWEB's Finishing Forum (2/28) -- Use a white primer. They have a product called a WB surfacer. Use that and then one more coat ...

    Re: sprayers/what to buy
    A message posted at WOODWEB's Finishing Forum (2/28) -- Like the other posts said...it really depends on what and how much your spraying. I spray eve ...

    What is the technical term for this piece of hardware?
    A message posted at WOODWEB's Furniture Making Forum (2/28) -- What is the technical term for this piece of hardware (looking to buy and use some in ...

    Re: best wood for a slab cut on an old maple
    A message posted at WOODWEB's Sawing and Drying Forum (2/28) -- Im not going to be much help answering your question, but was wondering when you saw ...

    SCM record 120 software needed
    A message posted at WOODWEB's CNC Forum (1/28) -- I have an older scm record 120 with 8 position tool changer and I don't have any of the original po ...

    Re: Any safety tips on switching to post-cat Polyurethane for cabinetry?
    A message posted at WOODWEB's Finishing Forum (1/28) -- Mat, 2k urethanes that use isocyanates as a hardener do not "off gas" as you state. ...

    Re: The SCM saga continues
    A message posted at WOODWEB's CNC Forum (1/28) -- The problem all arose from the battery going dead, I believe some or all of the Kavara was lost. I ...

    Re: Any safety tips on switching to post-cat Polyurethane for cabinetry?
    A message posted at WOODWEB's Finishing Forum (1/28) -- Hi Mat ! I am sorry about my poor english. I wanted to say Spray Booth. I would like to say t ...

    Re: Any safety tips on switching to post-cat Polyurethane for cabinetry?
    A message posted at WOODWEB's Finishing Forum (1/28) -- Hello ! With all those equipaments you already have there will be no problem for your workers ...

    Re: Any safety tips on switching to post-cat Polyurethane for cabinetry?
    A message posted at WOODWEB's Finishing Forum (1/28) -- If I was working in your spray booth 8 to 10 hours a day, I would require an air supplied ful ...

    Re: Any safety tips on switching to post-cat Polyurethane for cabinetry?
    A message posted at WOODWEB's Finishing Forum (1/28) -- I agree with the supplied air hood which I find way more comfortable than a half face mask.Es ...

    Re: Any safety tips on switching to post-cat Polyurethane for cabinetry?
    A message posted at WOODWEB's Finishing Forum (1/28) -- I am not sure what you mean by "cabin", can you clarify what you are calling a &quo ...

    Re: Biesse/Microvellum code error
    A message posted at WOODWEB's CNC Forum (1/28) -- you are going o have to look @ the last lines of code of a good posted nest and the bad. This will ...

    Re: best splitter etc for powermatic 66 saw,
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/28) -- Jeff, what on earth do you think non-moving splitters do, or don't do ...

    Scm Pratix N15
    A message posted at WOODWEB's CNC Forum (12/27/23) -- This new to us machine, can anyone tell me how to load a program to cut the whole job file, we ...

    Re: Clear coat over Stealth
    A message posted at WOODWEB's Finishing Forum (12/27/22) -- I believe Stealth is a post cat varnish. I use Matador, which is a similar product. I do ...

    Re: mdf 1/4' round door
    A message posted at WOODWEB's CNC Forum (12/27/21) -- I don't particularly want to burst any bubbles here but the very small radius above the quadran ...

    Re: drying spalted pine mantle
    A message posted at WOODWEB's Sawing and Drying Forum (12/27) -- Thanks. Maybe post the essentials here for ancestry. Keep me in the loop, I will che ...

    Re: Finishing Products
    A message posted at WOODWEB's Finishing Forum (12/27) -- I'm in S. Jersey, so recommending our local supplier would be of no use to you geographicall ...

    Re: Ref heights
    A message posted at WOODWEB's Cabinetmaking Forum (12/27) -- Keith, I feel your pain buddy. I actually had a post about this a few months back but it ...

    Kiln Drying Workshop
    A message posted at WOODWEB's Sawing and Drying Forum (12/27) -- We are holding our Annual Kiln Drying Workshop at SUNY ESF January 8-11, 2018 in Syr ...

    Re: Question for the small shop guys
    A message posted at WOODWEB's Cabinetmaking Forum (12/27) -- Cabmaker brings up some valid points. We have to figure out what makes us rum more effic ...

    Re: Lamellar zeta machine
    A message posted at WOODWEB's Cabinetmaking Forum (12/27) -- I recall posting my opinion on the Lamello P2 Zeta... I love mine too! You can save $$ b ...

    Lamellar zeta machine
    A message posted at WOODWEB's Cabinetmaking Forum (12/27) -- This is just a follow up to a posting from a few months ago. I bit the bullet and bought ...

    Re: What information do architects need?
    A message posted at WOODWEB's CAD Forum (12/27) -- A good thought for you to consider is "what does a builder need to prepare the space for this ...

    Re: Engineering Club
    A message posted at WOODWEB's CAD Forum (12/27) -- OK, you have my attention. I'm liking this a lot. Keep me posted (if I'm allowed to play ;)) ...

    Re: Prop 65
    A message posted at WOODWEB's Business and Management Forum (11/27) -- Sorry Puzzleman, I didn't know you were actually served a complaint. Your post ...

    Re: cnc post
    A message posted at WOODWEB's CAD Forum (11/27) -- As an aside have you spoken with Vectric support? They are generally very helpful ...

    Re: cnc post
    A message posted at WOODWEB's CAD Forum (11/27) -- Just a pot shot http://forum.vectric.com/viewtopic.php?f 4&t 16915 ...

    Re: Mesquite insects and treatment
    A message posted at WOODWEB's Furniture Making Forum (11/27) -- We use a lot of mesquite, well north of 1000 bd ft/yr and have had powder post beetle ...

    Re: AMC Controller
    A message posted at WOODWEB's CNC Forum (10/27/22) -- We have had plenty of experience with our 145G12 model Panelpro router. We just did a major upg ...

    Re: Western Red Cedar Solvent Soluble Extractives??
    A message posted at WOODWEB's Finishing Forum (10/27) -- Thanks for the responses. Doctor Gene I think nailed it. After initially posting this I noti ...

    Re: Veneering a Cylinder
    A message posted at WOODWEB's Architectural Woodworking Forum (10/27) -- Wood Dust, As B.H. suggests, you can do this with a large home-made bag and ...

    Holzher Post
    A message posted at WOODWEB's CNC Forum (10/27) -- Finished Holzher Post ...

    Hand written punchlists
    A message posted at WOODWEB's Business and Management Forum (10/27) -- We are all familiar with using handwritten punchlists to finish up projects. T ...

    Re: Slide or Panel
    A message posted at WOODWEB's Cabinetmaking Forum (10/27) -- After all the responses and other inquiries I've made elsewhere, the verdict-50 50. I ne ...

    Re: Any proficient Mozaik users here? I am considering it and have question
    A message posted at WOODWEB's CAD Forum (10/27) -- Wow, that's exactly the type of hinge report I'm looking for. Thanks for taking the time to post t ...

    Nice handicap flip up counter hardware
    A message posted at WOODWEB's Cabinetmaking Forum (9/27) -- We just finished a job that has two flip up handicap accessible counters. They have the n ...

    Re: Finding qualified finish employees
    A message posted at WOODWEB's Finishing Forum (9/27) -- Colby, Nice to see the Olhausen name. Many years ago I worked with Donny and finished a coupl ...

    Re: How Can This Be?
    A message posted at WOODWEB's Architectural Woodworking Forum (9/27) -- David, I'm glad you started this back up. I was wondering why it died so quic ...

    Re: TRACKING EMPLOYEE PRODUCTION
    A message posted at WOODWEB's Business and Management Forum (9/27) -- Hey Bob, I have posted this opinion before and will do so again. Having your em ...

    Re: Pay parity with other trades?
    A message posted at WOODWEB's Business and Management Forum (9/27) -- As with your last half dozen or so posts Paul, I disagree. Not to be construed ...

    Re: Finish Products & Techniques
    A message posted at WOODWEB's Finishing Forum (9/27) -- Josh Generally money talks and if you tell the customer it is going to cost a premium to have ...

    Re: Aging White Oak
    A message posted at WOODWEB's Finishing Forum (9/27) -- Try using Rubio Monocoat Fume and or Rubio Monocoat Smoke. Both are reactives that react with ...

    Re: Freestanding Kitchen Cabinets Design
    A message posted at WOODWEB's Cabinetmaking Forum (9/27) -- The posts that hit the floor, if I decide to engineer it that way, would simply be an ext ...

    Re: Wall panel installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/27) -- James, thanks for the update on your install. I order 500 of then las ...

    Re: furniture parts CNC service needed NY area
    A message posted at WOODWEB's CNC Forum (9/27) -- Hello I saw your post in the cnc forum. We run a 5x10 Omnitech /Anderson CNC If you would like to p ...

    Re: Paper Wheel Sharpening
    A message posted at WOODWEB's Furniture Making Forum (9/27) -- Thanks, David, for the reply - I think it was your response to a post that prompted me ...

    Re: Rotary maple
    A message posted at WOODWEB's Veneer Forum (9/27) -- (Moderator: The only way to best answer Walter's question is to include our company, along with ...

    Rubio Monocoat
    A message posted at WOODWEB's Cabinetmaking Forum (8/27) -- Hi everyone, I’m not sure if this post belongs here or in finishing, but here it is. I ha ...

    Re: Solid ebony glue ups
    A message posted at WOODWEB's Furniture Making Forum (8/27) -- Hey Kim, I hope you're doing well old friend! I think the tenons are not necessary. Ho ...

    Re: wool wax
    A message posted at WOODWEB's Finishing Forum (8/27) -- That Star Wol-Wax is the potash soap that I referenced in my posting, above. ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/27) -- Good afternoon . Yes I remember reducing everything 25-30% religiously . Sand , spray , sand ...

    blopentine?
    A message posted at WOODWEB's Finishing Forum (8/27) -- On many DIY forums posters are talking about "blopentine", a 1:1 mixture of Boiled ...

    Re: Bit suggestions for wide bevels
    A message posted at WOODWEB's CNC Forum (7/27/24) -- These replies are much appreciated. Enroute would seem like big shift and another learning curve ...

    expired catalyst
    A message posted at WOODWEB's Finishing Forum (7/27/22) -- Hello Wondering if any of you have used an expired catalyst when mixing your lacquer? I us ...

    Re: problem with 2k AAA pump, time to replace?
    A message posted at WOODWEB's Finishing Forum (7/27) -- We use 5 quart tubs that we buy from sherwin... EZmix.... so technically we say gallon or 2 g ...

    Re: Euro Cabs with furniture toekick
    A message posted at WOODWEB's Cabinetmaking Forum (7/27) -- Leo, I was thinking about your post and it seems like you would just butt joint it into t ...

    Re: Rate your Nested Based CNC
    A message posted at WOODWEB's CNC Forum (7/27) -- Brand / Model: Biesse Skill NBC Year: 2013 Table Size: 5x12 Vacuums: Two Busch Pumps Price (if you' ...

    How to brace a porch
    A message posted at WOODWEB's WOODnetWORK Forum (7/27) -- Hi, I want to help these people out and make a few extra bucks but I haven't encountered qu ...

    Re: How to brace a porch
    A message posted at WOODWEB's WOODnetWORK Forum (7/27) -- I posted a link to the CGSLST ad but I don't see it. It's a front porch/deck with weight be ...

    Looking for small bar clamps
    A message posted at WOODWEB's Furniture Making Forum (7/27) -- I'm posting it here because custom setups often require a ton of clamps. What I'm look ...

    Re: hickory table tops
    A message posted at WOODWEB's Finishing Forum (7/27) -- I use level sealer a post cat product from mlcambel.you can build 15 mill before standing. Aw ...

    Re: Placing your cut on an upcut saw
    A message posted at WOODWEB's Solid Wood Machining Forum (7/27) -- I was cutting a cabinet door job this morning and thought about this post. Here is ...

    Re: Where do you learn about wood railing fabrication etc?
    A message posted at WOODWEB's Architectural Woodworking Forum (7/27) -- Hey Dusty have you ever picked up A Treatise on Stairbuilding and Handrailing ...

    Re: Video of my 12 volt dual feed cutting a Black Oak
    A message posted at WOODWEB's Sawing and Drying Forum (7/27) -- Before this mill I had a mill that would cut 30'' logs. The problem was you had to ha ...

    Re: Looking for a New 5'' Orbital Sander
    A message posted at WOODWEB's Cabinetmaking Forum (6/27/24) -- Have a look at the post in the Furniture making forum - Sanders in the workshop. Dave ...

    Glue choices for Cork to Plywood
    A message posted at WOODWEB's Adhesives Forum (6/27/22) -- I'm gluing some tiles onto plywood for a serving tray. The handmade tiles were wedding coa ...

    Selexx pal inverter error
    A message posted at WOODWEB's CNC Forum (6/27) -- Hi all, I just started a job as a CNC operator and finished my second week. At the end of the day I ...

    Re: 16"/20" 4 post import planers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/27) -- Hi David, I own (and use) a Powermatic 20" planer with the mystery rollers on ...

    Re: Smallest field spray setup. Post cat.
    A message posted at WOODWEB's Finishing Forum (6/27) -- @JoeW I was hoping that someone would suggest an air brush. I had concerns about viscosity. W ...

    Re: How do you establish color consistency?
    A message posted at WOODWEB's Finishing Forum (6/27) -- Just me! I just finished up at a customer in Green Bay and did the exact same thing as I post ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/27) -- Thanks Paul--I've been seriously wondering what is so evil about this question. ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/27) -- Mel, we have come to a Y in the road , you have told us how talented and skille ...

    Re: Vcarve and Weeke
    A message posted at WOODWEB's CNC Forum (6/27) -- You can go to the site and download the demo full work version to test your machine and post proces ...

    Steel City 15" belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (6/27) -- I am looking at buying a steel city 15" open end sander for sanding shop cut ...

    Re: Low profile slotter
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- Bernie: Unless you have hundreds of these to do, I think what I might do is t ...

    Vitap
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- I read several posts regarding guys calling different companies asking questions about th ...

    Re: making 6x6 fence posts
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- also, it seems like every time I have ever looked at. store bought (Lowe’s, Home depo ...

    Re: Low profile slotter
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- I'm sure you already know to clamp a wood guide to the post and then use a Fe ...

    Re: Technical advice for an arc cut of large radius
    A message posted at WOODWEB's Furniture Making Forum (5/27) -- A couple of things I have done, is to bend a thin batten between to nails while pushin ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (5/27) -- Are you really serious about asking this or just normal post you making? Anyway, you got the ...

    Re: Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/27) -- i didnt want to commentat first due to the proposed use of minwax .......... but the above po ...

    Re: Help design a simple CNC router table
    A message posted at WOODWEB's CNC Forum (4/27/23) -- How many posts read about people making their own CNC machines/tables. Is it really more profita ...

    Re: How is hand scraped flooring made commercially?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27/22) -- Dang, my google musta been on the fritz. I had searched foogle and the tube bef ...

    Re: Can I run conversational software and a post processor on the same mach
    A message posted at WOODWEB's CNC Forum (4/27) -- Just curious, my machine uses a PLC, not sure what I can get away with ...

    Re: cutting corrugated aluminum
    A message posted at WOODWEB's CNC Forum (4/27) -- Sorry about the lack of clarity in my post. It is 1/4" thick and I was planning on cutting it ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/27) -- "Putting male/female pay disparities aside, do you really mean to say that ...

    Re: Making 100% flat Table for Solid Wood Working
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- The table is only as flat as the floor. The floor is only as flat as the foundatio ...

    Re: Starting a new company, what's most important?
    A message posted at WOODWEB's Business and Management Forum (4/27) -- I'm glad to see things get turned back some. There have been some good posts he ...

    Re: cnc accurecy
    A message posted at WOODWEB's CNC Forum (4/27) -- HI again. I tried rotating the parts it made no difference. tool diameter is perfect. I wold apprec ...

    Re: Moulder software
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- For some reason it didn't include the original Wood Web link in my last post. http ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- Please see the posts in a related topic herehttp://www.woodweb.com/cgi-bin/forums/ ...

    Re: Burning sawdust in a pellet stove
    A message posted at WOODWEB's Value Added Wood Processing Forum (4/27) -- Made a mistake in this post: Should read 25-30 gallons per day of sawdust. ...

    Re: Passing of Gene Wengert - "The Wood Doctor"
    A message posted at WOODWEB's WOODnetWORK Forum (3/27/25) -- RIP Doc. He was a fine man that let science rule his posts. He occasionally clashed with ...

    Re: Ipe Glue
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- I remember a job a lifetime ago. It was one of the first monster decks we did with ipe. I ...

    Re: Still sawing
    A message posted at WOODWEB's Business and Management Forum (3/27) -- I had an oak breadbox business. I sold to every mom & pop kitchen store fro ...

    Keeping Lumber Dry
    A message posted at WOODWEB's Sawing and Drying Forum (3/27) -- Not really sure where to post this, but I know Dr Gene is here at times, so.... We ha ...

    Cross country furniture shipping
    A message posted at WOODWEB's Business and Management Forum (3/27) -- This question may have been posted in the past- Looking for a way to get two ch ...

    Re: 180° Curved Staircase
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- I build my stairs quite differently, but the outcome is very good. I learned ...

    Alphacam training resources
    A message posted at WOODWEB's CNC Forum (3/27) -- I work in a small shop that's just getting started with our first CNC machine (Weeke Vantage 200). ...

    Re: Wood Identification
    A message posted at WOODWEB's Sawing and Drying Forum (3/27) -- The image itself is large enough but not clear enough, and even if it had been unfort ...

    Re: Uneven widebelt sanding
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- Adam, You have the most informative posts on sanding, equipment, technique etc. that I've ...

    Re: Hidden structural connector steel to wood
    A message posted at WOODWEB's Furniture Making Forum (2/27/22) -- MarkB: I would think that Rivnuts and the bedrail fasteners are the way to go. If t ...

    Re: Hidden structural connector steel to wood
    A message posted at WOODWEB's Furniture Making Forum (2/27/22) -- Could you weld a 2”x1/2” rod onto the steel, drill a hole in the endgrain of the ma ...

    Re: kitchen island installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (2/27) -- I have seen a lot of projects where they either use a steel support p ...

    Re: Stile/Rail door machine - opinions?
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- I second the previous poster. For small scale production I bought an invicta 5 speed slid ...

    Re: End Trimming on 45 Degree Shelves
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Quicktrim could you post a short video using this on end trims? Very interesting - didn't ...

    Re: pull outs
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- I'm sorry about my last post, I must have made a mistake. I just fact checked myself and ...

    Re: Univer power feeder oil change
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- There was a recent post here somewhere about the same issue. I just run straight Lucas in ...

    Refinishing
    A message posted at WOODWEB's Finishing Forum (2/27) -- Can post catalysed solvent b ased conversion varnish be sprayed over a water based UV cure fi ...

    Re: "live edge veneer"??
    A message posted at WOODWEB's Sawing and Drying Forum (2/27) -- Veneer can be 2" thick...we just commonly assume the 1/16-1/4" thickness UN ...

    Re: Blum tandom vs grass dynapro
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Hey Mark B, Thanks for those kind words. I enjoy reading the posts here on Wood-web and h ...

    Re: SCM Maestro out of memory issue
    A message posted at WOODWEB's CNC Forum (1/27) -- I really dislike Maestro. It is very limited as to what you can do and not all that user friendly. ...

    Re: Shop Pricing Strategies
    A message posted at WOODWEB's Business and Management Forum (1/27) -- I'm not a cabinet builder but will throw in my two cents as a consumer. Your pr ...

    Re: Rover J 1530
    A message posted at WOODWEB's CNC Forum (1/27) -- Please post a picture Pull all the estops and reset the safety cable if you have one. If you have a ...

    Panel processing for other shops
    A message posted at WOODWEB's CNC Forum (1/27) -- Im sure this has to have been covered but have spent a bunch of time with every search string I cou ...

    Re: Finding people?
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Don't forget WOODWEB's Job Exchange - you can post an "Offering Employment ...

    Re: Biesse/Microvellum code error
    A message posted at WOODWEB's CNC Forum (1/27) -- Look @ the post right as you get to G40 turning off correction and see what the last lines of code ...

    Re: Any good book for intermediate/advanced cnc machining in wood
    A message posted at WOODWEB's CNC Forum (12/26/22) -- Found this nice little manual online https://www.eoasaw.com/wp-content/uploads/CNC-MANUAL-PDF-N ...

    Re: Alphacam Vba for Geometry Z-level
    A message posted at WOODWEB's CAD Forum (12/26) -- I have never coded for Alphacam. Generally speaking, when I want to bottom z of something, certain ...

    Re: CNC recommendation for school
    A message posted at WOODWEB's CNC Forum (12/26) -- Aaron, what you are considering teaching would have been relevant 15 years ago, but the other cont ...

    Re: Cabinet Software
    A message posted at WOODWEB's CAD Forum (12/26) -- Cabinet Pro CNC is software that will take you from design to bidding, to cutlists, to panel optim ...

    William and Hussey users
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- I have been looking for a used William and Hussey moulder, I have noticed that there are ...

    Re: Great resources
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Try the link below Woodwork Career Alliance (WCA) is to support workforce development fo ...

    Re: cnc camparison
    A message posted at WOODWEB's CNC Forum (11/26) -- I really don't think it matters what controller you have, or what cnc you have. What matters is wh ...

    Re: grooved/coved/beaded panels
    A message posted at WOODWEB's Cabinetmaking Forum (10/26/24) -- Thank you. Art for everyday panels are solid glue ups that are then cut on a CNC. Tha ...

    Western Red Cedar Solvent Soluble Extractives
    A message posted at WOODWEB's Forestry Forum (10/26) -- I’m having problems with finish blistering on Western Red Cedar as a result of what appears t ...

    Help with Casmec 250-510 Post
    A message posted at WOODWEB's CNC Forum (10/26) -- I am having a problem with a Post for a Cosmec 250 drill bank g-code . looking for g-code Lines th ...

    Re: truing an import slr
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- thanks for your replies. i had the same thought about shimming the arbor housing/mount s ...

    Re: Table legs
    A message posted at WOODWEB's Furniture Making Forum (10/26) -- Do you understand about seasonal wood movement? I blew up the picture, and it looks l ...

    Re: Sellers beware!
    A message posted at WOODWEB's Business and Management Forum (9/26/24) -- Hi all, This is a good reminder for sellers (on this site or elsewhere). Her ...

    Sellers beware!
    A message posted at WOODWEB's Business and Management Forum (9/26/24) -- Had an Onsrud router posted on here and got a text from a guy wanting to buy ...

    Re: What do you use as a topcoat?
    A message posted at WOODWEB's CNC Forum (9/26/22) -- Just thought it was peculiar to post the machine you support on a question about finishing. ...

    Re: You're welcome
    A message posted at WOODWEB's Business and Management Forum (9/26) -- Alan Fair enough, and I have stated mine I agree to disagree, I'm pretty sure t ...

    Re: PCD feed/spin speeds for mfc
    A message posted at WOODWEB's CNC Forum (9/26) -- So any update regarding this post ...

    Re: Pay parity with other trades?
    A message posted at WOODWEB's Business and Management Forum (9/26) -- I got my journeyman carpenter card in the late 70s. IMO what I'm talking about ...

    Re: Two-phase and three-phase motors in a machine, what are they?
    A message posted at WOODWEB's CNC Forum (8/26/22) -- My first reaction was to echo LeoG and say there is no such thing as a two-phase motor. People o ...

    Re: Rising prices
    A message posted at WOODWEB's Business and Management Forum (8/26/22) -- The countertop guys are the last one in on a job. Most jobs are at deadline ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/26/21) -- OP here... First off - apologies to those that think is isn't suitable for this forum. ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/26/21) -- I will say this the pictures of the kitchen and the pictures of the drawers don't matc ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- I will start off by saying I am a firm believer of chasing your dreams . I wish ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- I am in AZ we have no union cabinet shops, it's a right to work state. My wife ...

    Re: Free Webinar, 8/26/2020 Drying oak And Maple
    A message posted at WOODWEB's Sawing and Drying Forum (8/26) -- Gene, and others, I will not be able to attend the Webinar due to work, but have the ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Ryan's post is spot on. Spend your money on the stuff to do the pool table and ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Mark B, Thanks for clarifying that pricing information, that is so very true. M ...

    Ergonomic Mouse for drafting
    A message posted at WOODWEB's CAD Forum (8/26) -- Was wondering if any of you drafters have struggled with carpal tunnel and made a change in the typ ...

    Re: Cabinet design software
    A message posted at WOODWEB's CAD Forum (8/26) -- Hi Don, I saw your post about a Cabinet Design Software. I work for KCD Software and we have a prog ...

    Re: KV Standard Cutter
    A message posted at WOODWEB's Cabinetmaking Forum (7/26/22) -- This cutter was sold a long time ago. I cannot get logged in to remove the post. ...

    Re: dust/shavins into enclosed trailer
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (7/26) -- Correct, hence the question, looking for general advice, tips ect ...

    Re: Can anyone recognize this control?
    A message posted at WOODWEB's CNC Forum (7/26) -- 1. Did you contact Felder? 2. What software package is the post processor for? ...

    Re: Drying Black Spruce dead straight
    A message posted at WOODWEB's Sawing and Drying Forum (7/26) -- Gene, if you would, could you post a drawing or similar way of seeing just what you m ...

    Re: Red Oak for Barn Siding
    A message posted at WOODWEB's Sawing and Drying Forum (7/26) -- Thank you fellas, guess I'm not too far off then. 10-4 on the plantings Doc., I ain't ...

    Re: milling quartered red oak
    A message posted at WOODWEB's Sawing and Drying Forum (7/26) -- Hey Andy, Though I don't know the answer to your question, I do know that the Doc and ...

    Re: Anyone in Vegas?
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Paul, Same here as Leland. I would have loved to hear you speak but I left befo ...

    Re: turbocad v8 mac
    A message posted at WOODWEB's CAD Forum (7/26) -- Hey Tim, I have tried to use Mac for professional level cad/cam results for a number of years but r ...

    Re: Teak Talk
    A message posted at WOODWEB's Forestry Forum (7/26) -- Its funny (to me ) that this post appears today. i pulled into my drive last night with a trai ...

    Re: Plunge/Other Router Inaccuracies?
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/24) -- Hi Jim. Thank you for your thoughts. There are only two slots involved - part o ...

    Re: Long drill bits
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/22) -- If the shank is stiff and the grind is accurate and sharp even a bit of gnarly ...

    Re: making my own cabinet jack
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/26) -- I think it was Kerry Fullerton who posted a link to a plan for one. I ...

    Re: grain match
    A message posted at WOODWEB's CAD Forum (6/26) -- No, you can manually select grain match group as the original poster indicated. Probably your mater ...

    Re: Vegas or Bust Update
    A message posted at WOODWEB's Business and Management Forum (6/26) -- Bill, Send me your current contact information at bbuckleyt32@gmail.com and I w ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/26) -- None of that is relevant to my post about just doing the work. ...

    Re: Straining gallon plus size
    A message posted at WOODWEB's Finishing Forum (5/26) -- Also,.. glanced in the cabinet after post and forgot that as much as it makes me throw up in ...

    Cabinet vision
    A message posted at WOODWEB's CAD Forum (5/26) -- I'm trying to create angled louvers in cabinet vision as opposed to only horizonal slats that they ...

    Re: Commercial bidding
    A message posted at WOODWEB's Business and Management Forum (5/26) -- I misspoke on my previous post I meant to say you would be better off freeing y ...

    Re: Alphacam VBA
    A message posted at WOODWEB's CNC Forum (5/26) -- Ken, I'm pretty well versed in VBA, but know nothing about AlphaCam. What exactly are you trying to ...

    Re: Performance bond
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Bond cost will be based on dollars bonded and your creditworthiness. Cost is ba ...

    Re: No more service for omnitech
    A message posted at WOODWEB's CNC Forum (5/26) -- Ok, I am at the same boat, I got a 2005 which needed some services, same thing the person at Giben ...

    Re: Interesting article about disruptive economies
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Paul, yes, you can go ahead and post an announcement when the book is available ...

    Please Help with Morbidelli Globo 363
    A message posted at WOODWEB's Cabinetmaking Forum (4/26/25) -- Hello, does anyone know how to use this machine? Can someone post an instructional vid ...

    Help with Morbidelli Globo 363
    A message posted at WOODWEB's Architectural Woodworking Forum (4/26/25) -- Hello, does anyone know how to use this machine? Can someone post an instr ...

    Re: Help design a simple CNC router table
    A message posted at WOODWEB's CNC Forum (4/26/23) -- So you intend to build your own CNC? Simple or complex, you need all the same components, a cont ...

    Re: Refinishing End Table
    A message posted at WOODWEB's Finishing Forum (4/26) -- Took down to the wood means I used sand paper only, using 80 grit to start with and worked up ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/26) -- David, thanks for the post. Very interesting, and well illustrates the direct ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/26) -- Christ, it's getting to the point I can just ignore any new posts about busines ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/26) -- Great post Richard. My daughter is a strong person and stands up for what she t ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/26) -- Sorry for the third post... but man, you guys have no idea just how much this s ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/26) -- Pat Gilbert AKA Pinestraw, I am unsure what the relevance of your post is? The ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/26) -- "I am sure a number of you have daughters. How would you feel is they came ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/26) -- Richard Re read my post this time for comprehension. I challenge you to find an ...

    Hearing loss and CNC machines
    A message posted at WOODWEB's CNC Forum (4/26) -- The National Football League is just now coming to grips with a degenerative brain disease called C ...

    Re: Starting a new company, what's most important?
    A message posted at WOODWEB's Business and Management Forum (4/26) -- we looked at the NEWcnc as well, but opted for the Weeke. turning balusters/isl ...

    Re: Pre cat over cat
    A message posted at WOODWEB's Finishing Forum (4/26) -- Sounds like a pre-cat from SW If it was post you would of know since you would have to cataly ...

    Re: Millwork with Ipe
    A message posted at WOODWEB's Architectural Woodworking Forum (4/26) -- I guess we did have good luck with the ipe. I had expected trouble as you hav ...

    Re: CNC Bits Recommendation
    A message posted at WOODWEB's CNC Forum (3/26/24) -- If I never read another post from idiotic wattsan, it'll be too soon. ...

    Operating vac pumps remotely
    A message posted at WOODWEB's CNC Forum (3/26/22) -- I had several people ask about how I Set up my vacuum pump’s remotely. It was also mentioned in ...

    Re: COVID19: An Open Letter To Our Woodworking Partners
    A message posted at WOODWEB's Cabinetmaking Forum (3/26) -- Thanks for this thread and info. It has been like tip toeing thru a miefield to get info ...

    Re: COVID19: An Open Letter To Our Woodworking Partners
    A message posted at WOODWEB's Cabinetmaking Forum (3/26) -- Salice status update: Below is a letter sent to Salice customers and distributors and pos ...

    Re: Shop floor productivity issues
    A message posted at WOODWEB's Business and Management Forum (3/26) -- Bash, Lot of things I see in your post, but some things to consider: What are y ...

    Re: 180° Curved Staircase
    A message posted at WOODWEB's Architectural Woodworking Forum (3/26) -- Just from reading the post I can offer the following . I've been making curve ...

    Re: Powermatic saw not reverse threaded
    A message posted at WOODWEB's Cabinetmaking Forum (3/26) -- No, I get the fact that reversing the current flow changes the motor spin. I remember lea ...

    Re: installation crew NYC
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/26) -- Jake - You can look over the listings on WOODWEB's Job Exchange - the ...

    Re: Old tablesaw
    A message posted at WOODWEB's Cabinetmaking Forum (3/26) -- Thx guys. Can u guys post pics of what u did? ...

    Re: Custom Run's - Various questions - input
    A message posted at WOODWEB's Solid Wood Machining Forum (3/26) -- ML, I think we are all on the same page here (which I pretty much knew) other than ...

    Re: RE: Eastern Red Cedar
    A message posted at WOODWEB's Forestry Forum (2/26/23) -- Eastern red cedar makes for great decking, fencing, and posts; if you want to give making o ...

    Re: Going over a nitro cellulose with a Precat
    A message posted at WOODWEB's Finishing Forum (2/26/22) -- Hey Dennis, just so you know, I am not just a chemist, everything I speak of is from Hands ...

    Re: Intro to Marketing Cabinet Business
    A message posted at WOODWEB's Business and Management Forum (2/26/22) -- Hey Brent, I am not a cabinet maker but someone who has been involved in the ...

    Re: Worried about warping: edge glued doors with no rails
    A message posted at WOODWEB's Architectural Woodworking Forum (2/26/22) -- Please don't use my advice in your arguing with the contractor. If you rev ...

    Re: Removing sharpie from raw veneer panel
    A message posted at WOODWEB's Architectural Woodworking Forum (2/26) -- There are some furniture touch up guys that can work some magic and hand draw ...

    Re: pinholes vs orange peel and retardee
    A message posted at WOODWEB's Finishing Forum (2/26) -- Like Shane said We need more info Are you spraying CV ? Did you prime/seal ? What equipment a ...

    Re: Looking into using Mozaik, but...
    A message posted at WOODWEB's CAD Forum (2/26) -- Mozaik is pretty nice, There are tons of training vids and you can send jobs to the help desk if yo ...

    Re: insulated carriage doors
    A message posted at WOODWEB's Architectural Woodworking Forum (2/26) -- I thought "detailed plans" meant "detailed plans". As you ...

    Re: Stave core vs. 10/4
    A message posted at WOODWEB's Architectural Woodworking Forum (2/26) -- David, I agree in general with your comments about solid vs not-engineered. I ...

    Re: Stave core vs. 10/4
    A message posted at WOODWEB's Architectural Woodworking Forum (2/26) -- Kevin, Where is this David’s post that you mentioned? Thanks ...

    Business Outlook & Plan
    A message posted at WOODWEB's Business and Management Forum (2/26) -- We have wide range of differing views on where we are as a country and where we ...

    Re: Carborundum Premier Red sandpaper
    A message posted at WOODWEB's Cabinetmaking Forum (2/26) -- Thank you Zach!!! Was on the phone almost 10 minuites with the lady at Hafele yesterday a ...

    20/4 white ash
    A message posted at WOODWEB's WOODnetWORK Forum (2/26) -- I am looking for a source for 20/4 ash for posts for a banquet Im building for a restaurant ...

    Re: Fusion 360 post for Masterwood Router
    A message posted at WOODWEB's CNC Forum (1/26/23) -- Hi, i developed it some time ago. If anybody will interested, you can check output there ...

    Re: Shop Pricing Strategies
    A message posted at WOODWEB's Business and Management Forum (1/26) -- Rich - Since my time is an estimation I like to figure in a 10% margin. I just ...

    Re: Door/Drawer bumpers
    A message posted at WOODWEB's Cabinetmaking Forum (1/26) -- I'm having the same problem with my Distributors name brand I'm hoping someone will post ...

    Re: Transition from Autocad to Wood cad/cam or Giotto or BSolid
    A message posted at WOODWEB's CAD Forum (1/26) -- Bsolid is very nice stuff,,,I made a few videos and manuals when I worked there,,,,,woodcad/cam is ...

    Re: Website Development
    A message posted at WOODWEB's Business and Management Forum (1/26) -- Sorry Cabmaker, you lost me at “I know everything" What you are talking ab ...

    Re: Software question
    A message posted at WOODWEB's CAD Forum (1/26) -- Try Autodesk Fusion 360. It has a generous trial time. It's almost free. You can model any case you ...

    Re: cnc dust collection
    A message posted at WOODWEB's CNC Forum (1/26) -- Bill, thank you for posting that picture. I just got a pair of cylinders to run the gates on top of ...

    Re: Built-in Field Face Frame install or prefab?
    A message posted at WOODWEB's Cabinetmaking Forum (1/26) -- I am having a hard time understanding what the space, and the cabinetry looks like. Could ...

    Re: How to change careers
    A message posted at WOODWEB's Cabinetmaking Forum (12/25) -- Agreed some of the earlier posts. We tried several garage guys ,but to no avail. Commerc ...

    Re: Export csv file to CAM software ?
    A message posted at WOODWEB's CAD Forum (12/25) -- Yes cpp imports overall dimensions of the cabinet, then you need to re-consturct the cabinet parts ...

    Re: p-lam edges peeling off
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/25) -- I was thinking heat as well till your last post. We had a primer proble ...

    Re: Start over with your dream shop/business
    A message posted at WOODWEB's Business and Management Forum (11/25) -- Im uber late to this but the fab numbers on the solid surface seem real but th ...

    Re: Trouble Importing DXF's to Mozaik
    A message posted at WOODWEB's CAD Forum (11/25) -- I have struggled with this as well. For one the editor in mozaik is kinda confusing so you think O ...

    Re: Resin resources
    A message posted at WOODWEB's Furniture Making Forum (11/25) -- I'd really love to hear how those river tables handle wood movement after several sea ...

    Re: Finish problems
    A message posted at WOODWEB's Finishing Forum (11/25) -- Ok, so I played around more with this today, and still getting the same results. I did notic ...

    Re: Modern smooth face on exterior doors
    A message posted at WOODWEB's Architectural Woodworking Forum (11/25) -- This was the photo intended for the post.... The ribs here are 3/4" thi ...

    Re: Does Lean work on a construction site?
    A message posted at WOODWEB's Business and Management Forum (11/25) -- Pat, Every industry has sea changes. In your & my career we've seen a half ...

    Re: White Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (11/25) -- Thanks for the info Dave. Waterborne primers and paints have been used in the automotive ind ...

    Re: RE: Hot box to dry wood
    A message posted at WOODWEB's Sawing and Drying Forum (11/25) -- It sounds like your starting at a very high MC and dropping it fast....severe checki ...

    Re: LSL Lamination Failure
    A message posted at WOODWEB's Architectural Woodworking Forum (11/25) -- Along with the obvious moisture related problems, I can see glue line failur ...

    Kiln Drying Workshop - Syracuse, Jan 5-8, 2015
    A message posted at WOODWEB's Sawing and Drying Forum (11/25) -- We are holding our Annual Kiln Drying Workshop at SUNY ESF January 5-8, 2015 in Syra ...

    Re: Software for Corbels & Legs
    A message posted at WOODWEB's CNC Forum (11/25) -- Adam, I mostly use Aspire, but I do use a few for special items. I can do a 3 sided corbel on the ...

    Re: school project
    A message posted at WOODWEB's WOODnetWORK Forum (11/25) -- I agree with all posts on your subject matter. If it is a loose installation joint you are ...

    boice crane shaper
    A message posted at WOODWEB's WOODnetWORK Forum (11/25) -- I have an opportunity to acquire a boice crane shaper in good condition. The machine does ...

    Respirator Cartridges
    A message posted at WOODWEB's Finishing Forum (10/25/23) -- Just thought I'd ask, what 3m cartridges do you use in a half mask. I've been using the 6 ...

    Re: MLC new post-cat primer
    A message posted at WOODWEB's Finishing Forum (10/25/21) -- 20 - 30 minutes recoat time indicates that the material should also be ready for sanding, ...

    Re: Biesse CIX code
    A message posted at WOODWEB's CNC Forum (10/25) -- Thanks Marek It has been a pretty rough week but I am finally making progress. Once finding out fe ...

    Re: Is service just as important as product?
    A message posted at WOODWEB's Business and Management Forum (10/25) -- need to get to the point of doing what you say you are going to do plain and s ...

    Re: 5x10 Nested base routers for 40K-60K range
    A message posted at WOODWEB's CNC Forum (10/25) -- I have a Camaster Cobra 5 x 10 cutting daily since 2012, Camaster has a forum with tens on thousan ...

    Re: 5x10 Nested base routers for 40K-60K range
    A message posted at WOODWEB's CNC Forum (10/25) -- We have a ShopSabre as well for about 3 years now. Zero issues. Pre and post sale support has been ...

    Re: Large conference table
    A message posted at WOODWEB's Furniture Making Forum (10/25) -- Thanks for the kind words Dan. I'll post this for my crew tomorrow. It was a fun tabl ...

    Best CAD /CAM for solid stock woodwork mfg
    A message posted at WOODWEB's CAD Forum (10/25) -- What are recommendations for integrated CAD/CAM for doing solid wood machining on a CNC for manufa ...

    Re: Sinker Log Process Help
    A message posted at WOODWEB's Sawing and Drying Forum (10/25) -- Hi, All you need is the name of a local sawyer with a portable sawmill, who can come ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/25) -- Derrek, Great video. Thanks for posting and sharing it. Mark ...

    Using old wood for new projects?
    A message posted at WOODWEB's Sawing and Drying Forum (10/25) -- Lately I have had the opportunity to buy some wood from a couple of guy's that have ...

    Re: Using old wood for new projects?
    A message posted at WOODWEB's Sawing and Drying Forum (10/25) -- Yes,I have 2 meters,a Wagner pinless,and a Lignomat pinned meter.I don't have a prob ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (10/25) -- This post is pretty enlightening....before I get into the TopSolid aspects, I'll not that sometime ...

    AutoCad LT
    A message posted at WOODWEB's CAD Forum (9/25/24) -- I used Cabnetware Detailer to design and produce cut list and that has gone away. I used AutoCad ...

    5 axis CAM & post advice
    A message posted at WOODWEB's CNC Forum (9/25) -- We recently purchased a motion master 5 axis twin table CNC. Need some advice on what would be the ...

    Re: slide saws
    A message posted at WOODWEB's Solid Wood Machining Forum (9/25) -- I have an SCMI SI16W (mid 90's) and can verify it's built like a Sherman tank! I u ...

    Flammable Contact Cement & OSHA Ristrictions
    A message posted at WOODWEB's Adhesives Forum (9/25) -- We have been using a non-flammable spray contact cement for the last 3 years to comply to OSH ...

    Re: Very Large Oak Tree
    A message posted at WOODWEB's Value Added Wood Processing Forum (9/25) -- If I had that log, first I would make sure that it it is, indeed white oak. ...

    Re: Range Hood Build
    A message posted at WOODWEB's Cabinetmaking Forum (8/25/25) -- Thanks Tom if I didn’t choose to put a backer on this wouldn’t it be just as good to s ...

    Rising prices
    A message posted at WOODWEB's Business and Management Forum (8/25/22) -- I have read a few posts over the last few months relating to escalating mate ...

    Modular table
    A message posted at WOODWEB's Architectural Woodworking Forum (8/25/21) -- I have a client who is asking me to build a 12 foot table, single board to ...

    Re: Modular table
    A message posted at WOODWEB's Architectural Woodworking Forum (8/25/21) -- The two traditional solutions for this were worked out many years ago, bef ...

    Re: It was hard decision, and we glad we took it
    A message posted at WOODWEB's CNC Forum (8/25/21) -- That is an interesting post, maybe Felder is turning a new page, a lot of their equipment in the ...

    Re: And its about to get much worse
    A message posted at WOODWEB's Business and Management Forum (8/25) -- Backstory, I worked for DJS as young man in my early 20's and I learned enough ...

    Re: Mozaik post processors
    A message posted at WOODWEB's CAD Forum (8/25) -- Have you contected Moziak, They wrote mine for the CAMaster (.tap) which is easily edited. Most pro ...

    Re: Mozaik post processors
    A message posted at WOODWEB's CAD Forum (8/25) -- Boy am I still asllep ! I see no reason you could not write code with moziak yet I am courious as t ...

    Ballpark equip costs to start milling reclaimed wood flooring??
    A message posted at WOODWEB's Sawing and Drying Forum (8/25) -- I'm sure their have been many threads that have touched on this topic and I did a lit ...

    Re: Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (8/25) -- Hi Alan, If you still need more answers, you are welcome to post your questio ...

    Re: Black Walnut Finishing
    A message posted at WOODWEB's Finishing Forum (8/25) -- I was replying to Robert J.'s post on pourable epoxy table top finish. ...

    Re: Crown Moulding Match, Egg/Dart
    A message posted at WOODWEB's Architectural Woodworking Forum (8/25) -- Thank you very much Jack and Brittany. The picture Brittany posted is pretty ...

    Re: Alphacam refusing to properly nest multiple copies
    A message posted at WOODWEB's CNC Forum (7/25/24) -- I got it figured out through trial and error. I have been erroneously using subroutines nesting ...

    Re: OSAI conrol need help
    A message posted at WOODWEB's CNC Forum (7/25/24) -- I ahve done this execices. C is not moving more than required however required to resetup Offset ...

    Assembly workstation in action - 78 cabinets assembled in 7.5 hours
    A message posted at WOODWEB's Cabinetmaking Forum (7/25) -- I wanted to post a video of using this assembly workstation after I've had more experienc ...

    Help Want Adds
    A message posted at WOODWEB's Business and Management Forum (7/25) -- Besides Craigslist and Woodweb. What are some good sources for posting help wan ...

    Re: Over Paid Employee?
    A message posted at WOODWEB's Business and Management Forum (7/25) -- I post a Now Hiring Ad for everybody to see and when I have a interview I make ...

    Re: Looking for ideas on how you organize my tools for installations
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/25) -- Joel you are still alive, good deal. Thanks for the responses. I watc ...

    Re: Solar kiln : Leave Circulation fans on after sunset
    A message posted at WOODWEB's Sawing and Drying Forum (7/25) -- Thanks for your response. I'm a bit confused what to understand by "sunset" ...

    Re: Selling my business
    A message posted at WOODWEB's Business and Management Forum (6/25/24) -- Woodweb has a Classifieds area to sell businesses. You could try posting the ...

    Re: 16"/20" 4 post import planers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/25) -- Harold, have you used one of the imports with the rollers on the top? I was kind o ...

    Re: Old Delta shapers
    A message posted at WOODWEB's Cabinetmaking Forum (6/25) -- Probably the strain has more to do with the cutters and work you try to do with it. Power ...

    Re: 16"/20" 4 post import planers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/25) -- Harold's remark reminded me of the planer my first boss bought. Brand new shiny It ...

    Re: New to CNC need your thoughts
    A message posted at WOODWEB's CNC Forum (6/25) -- Many good posts. I'll 2nd the use of HSK tooling. We have one machine with it and one with BT30 (IS ...

    Fitting a very thick slab?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/25) -- I need to cut a 4"+ thick end grain butcher block 42" x 96& ...

    Re: Reversing the effects of wood bleach on oak
    A message posted at WOODWEB's Finishing Forum (6/25) -- Btw Denny J, wish I could post a photo, images just don't seem to be showing the issue very w ...

    Re: 3M PPS-H/O (high output)
    A message posted at WOODWEB's Finishing Forum (6/25) -- Pdub, I put it together myself with parts that I had on hand. I will post pictures next week. ...

    Re: Question for Dennis
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- Thanks for responses. I didn’t think there would be a problem but thought I would post ju ...

    Re: Mounting Wall Paneling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/25) -- The most accepted way to do this is to use Z clips mounted to a sub p ...

    Re: Need advice Crotch Mahogany Conference table
    A message posted at WOODWEB's Veneer Forum (5/25) -- Im going to crossband the individual veneers and probably use sizing to give me some extra worki ...

    Advanced Lumber Drying Workshop
    A message posted at WOODWEB's Sawing and Drying Forum (5/25) -- This is a reminder that Penn State Extension will be hosting an Advanced Lumber Dryin ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/25) -- I may have posted this before either way if you haven't read it this it is a go ...

    small job referrals
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- Anyone in the Seattle area who is interested in being the recipient of our small job refe ...

    Re: Interesting article about disruptive economies
    A message posted at WOODWEB's Business and Management Forum (5/25) -- I didn't post this as a rant against "the machine" but rather as a si ...

    Re: Build or buy?
    A message posted at WOODWEB's Cabinetmaking Forum (5/25) -- I've watched that video before (I believe at your suggestion on a different thread), and ...

    Re: Interesting article about disruptive economies
    A message posted at WOODWEB's Business and Management Forum (5/25) -- @JWS: book is on its way, publication date is August 4th. If the mods here will ...

    Re: The T and M curse.
    A message posted at WOODWEB's Business and Management Forum (5/25) -- I guess your post tells me that you don't have a correct handle on your labor. ...

    Interesting article about disruptive economies
    A message posted at WOODWEB's Business and Management Forum (5/25) -- So Pat Gilbert won't have to be exposed to the wrong silo of information I have ...

    Re: Stair Treads Cupping
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/25) -- The pur adhevies do indeed (even hot melts) use moisture as a catalys ...

    Re: Stair Treads Cupping
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/25) -- Sorry guys. I have been off the internet for a couple days. Thanks fo ...

    Re: Martin T78
    A message posted at WOODWEB's Cabinetmaking Forum (4/25/22) -- Thanks Jim - I worded my post poorly. I meant does anyone have experience using a T78, ...

    Re: Exterior Dutch door weather strip
    A message posted at WOODWEB's Architectural Woodworking Forum (4/25/22) -- great site i love it keep posting more! ...

    Re: What is throat seal oil?
    A message posted at WOODWEB's Finishing Forum (4/25) -- I'm like Herb, I use mineral oil. I use pre-cats, post cats and 2k Polys. Never had an issue. ...

    Re: Shipping
    A message posted at WOODWEB's Business and Management Forum (4/25) -- Thanks to give informative info. we will check your services in future thanks f ...

    Re: Glues for Wood Veneer lamination in hot press
    A message posted at WOODWEB's Adhesives Forum (4/25) -- Thanks for your input, i was thinking urea resin glue i believe when i was righting that post ...

    Re: Quickly reverse timber shrinkage?
    A message posted at WOODWEB's Furniture Making Forum (4/25) -- I agree with the other post regarding the inevitability of wood movement. To answer yo ...

    Re: Phenolic Countertop feed and speed
    A message posted at WOODWEB's CNC Forum (4/25) -- Mark, Thanks for posting back the answer. It's nice to see threads that result in a definitive answ ...

    Re: Pre cat over cat
    A message posted at WOODWEB's Finishing Forum (4/25) -- In general, and there are always exceptions with specific brands... You can usually spray a c ...

    Re: laser cut wood grilles
    A message posted at WOODWEB's Cabinetmaking Forum (4/25) -- This is a pretty typical response from people who don't own cnc or laser machines. They t ...

    what soft ware needed
    A message posted at WOODWEB's CAD Forum (4/25) -- Hi, we are so new at the cnc world, we just go the 1st one and waiting for the initial setup. we ha ...

    Re: 20mil vs 10mil
    A message posted at WOODWEB's Veneer Forum (4/25) -- Nice to know the desk is 17'. Maybe a piece of information we could have used in the beginning. ...

    Re: SBA Economic Injury Disaster Loans
    A message posted at WOODWEB's Business and Management Forum (3/25) -- I had a lengthy discussion with my banker on Monday. The key points he made wer ...

    Re: Going from HVLP to AAA
    A message posted at WOODWEB's Finishing Forum (3/25) -- I'd agree with other posters above, I have the CAT aaa and a Kremlin but would hesitate to bu ...

    Re: Laguna CNC
    A message posted at WOODWEB's CNC Forum (3/25) -- If you post a message on the V Carve forum with a sample file of a simple rectangle cut and circle ...

    Re: Powder post or Ambrosia?
    A message posted at WOODWEB's Sawing and Drying Forum (3/25) -- The ambrosia likes or requires 30% MC and higher; oftentimes the literature says over ...

    Re: Stain issues
    A message posted at WOODWEB's Finishing Forum (3/25) -- Jeff, I think I was thinning them with toluene and using them as a toner more or less. I had ...

    Re: Powder post or Ambrosia?
    A message posted at WOODWEB's Sawing and Drying Forum (3/25) -- >Why are you worried about the firewood? We'll be sawing quite a few ash trees fro ...

    Re: Latex Gloves
    A message posted at WOODWEB's Finishing Forum (3/25) -- Good post. I often wonder about this myself when I put on my black nitrile gloves and go to p ...

    Re: Pull out spacers.
    A message posted at WOODWEB's Cabinetmaking Forum (3/25) -- Hello DS I'm not sure if I understand you but like I said on previous post, all our boxes ...

    Re: Trouble Ripping 6/4 Soft Maple
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- I just noted that there are three different responses here by people named David. ...

    Best Horizontal Band Re-Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/25) -- Hello Woodweb, Long time reader, first time posting. I'm looking for insight on pu ...

    Re: Started charging for design/bids
    A message posted at WOODWEB's Business and Management Forum (3/25) -- Pete, Thanks for your post. It's nice to hear someone else say it for a change. ...

    Re: Worried about warping: edge glued doors with no rails
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25/22) -- Thank you all for your advice! I haven’t paid the contractor in total for ...

    Re: Endgrain Inlay
    A message posted at WOODWEB's Furniture Making Forum (2/25) -- Well, some very good news, and maybe slightly dissapointing news for you guys. Very go ...

    Re: pull outs
    A message posted at WOODWEB's Cabinetmaking Forum (2/25) -- I'm sorry I misread the post on using pocket screws to make your drawer boxes. Not our me ...

    Re: CNC plunging
    A message posted at WOODWEB's CNC Forum (2/25) -- I made a mistake on my post about which bits we use. It should have said Onsrud Marathon. We use Le ...

    Re: Stave core vs. 10/4
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- I think first you have to ask your self why is the client hiring me . Laminat ...

    Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/25) -- The best equipment I have in my shop was made outside America. I have a Butferi ...

    Re: How it starts:
    A message posted at WOODWEB's Business and Management Forum (2/25) -- "it can be useful for planning, and investing." That is why I posted ...

    Re: woodwop
    A message posted at WOODWEB's CNC Forum (2/25) -- Anthony, You need to create the 5 lines (contours), then apply each tool to one of the 5 lines. It ...

    Re: How it starts:
    A message posted at WOODWEB's Business and Management Forum (2/25) -- Pat, where do you find all these fancy graphs you're always posting? It's a won ...

    Wood movement across large widths
    A message posted at WOODWEB's Sawing and Drying Forum (2/25) -- I wasnt quite sure under what heading to post this question, but thought I would star ...

    Re: End work on long sash rails
    A message posted at WOODWEB's Architectural Woodworking Forum (2/25) -- Not sure by your post where the movement is. Slipping and going out of square ...

    Moulding line
    A message posted at WOODWEB's Solid Wood Machining Forum (1/25/24) -- What is the best avenue for selling my entire moulding operation? I am going to ...

    Software Advice
    A message posted at WOODWEB's Cabinetmaking Forum (1/25/22) -- Hello Everyone, I work for Plain and Fancy Kitchens in Schaefferstown, PA. I would say ...

    Re: Painted Cabinets Chipping
    A message posted at WOODWEB's Cabinetmaking Forum (1/25/22) -- Rich, I appreciate where you are coming from, however I can understand a homeowner goi ...

    Re: Cabinet hinges
    A message posted at WOODWEB's Cabinetmaking Forum (1/25) -- Hello Scott, I see by your post that you are familiar with both Salice and Blum. You know ...

    Re: Website Development
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Derrek, Back when you were dabbling in website development the steps it took to ...

    Re: Website Development
    A message posted at WOODWEB's Business and Management Forum (1/25) -- Sorry. My post above had: "Your task is to get people to find you, know yo ...

    Re: Costing estimates
    A message posted at WOODWEB's Business and Management Forum (1/25) -- It looks like the AWI database or the data behind it may be in this costing sof ...

    Re: Old School Planer
    A message posted at WOODWEB's WOODnetWORK Forum (1/25) -- Did you post on OWWM? There's a ton of knowledge on old equipment contributing to that site ...

    Re: 480v to 208 volt - efffect on amps?
    A message posted at WOODWEB's WOODnetWORK Forum (1/25) -- Correct Bruce. I have confirmed this with an electrician, who has walked the building down ...

    Re: Job part checklist for Cabinet Vision?
    A message posted at WOODWEB's Cabinetmaking Forum (12/24/24) -- Hey Matt, you will probably get more responses to your question by posting your quest ...

    Re: Net working to older biesse XP machine
    A message posted at WOODWEB's CNC Forum (12/24) -- Thanks for all the suggestions. After we get the machine up and going and gone through fully, we w ...

    Holzher cosmec conquest 250
    A message posted at WOODWEB's CNC Forum (12/24) -- This is the first time I posting anything on this website so please bear with me. The Information ...

    Re: Yearly gross dollar output per employee
    A message posted at WOODWEB's Business and Management Forum (12/24) -- While I rarely post on Woodweb this is always an interesting question, What I ...

    Re: Smaller CNC router choices, dedicated for small wood components
    A message posted at WOODWEB's CNC Forum (12/24) -- I posted re Shopbot since that's what I have and use. I know a lot of other guys who use and love ...

    Re: SLAB SAWING with BIG SAW
    A message posted at WOODWEB's Sawing and Drying Forum (12/24) -- Thanks for the more details. Of course it would work with a cantilever mill. You jus ...

    Re: When will it end....
    A message posted at WOODWEB's Architectural Woodworking Forum (11/24/22) -- The person who built this door did NOT post it on this website. Maybe the ...

    Re: loading Parts to nest sheet in alphacam help
    A message posted at WOODWEB's CAD Forum (11/24) -- Need way more info. What version? What are you nesting? Do you have a proper post for the CNC? ...

    Re: Resin resources
    A message posted at WOODWEB's Furniture Making Forum (11/24) -- $100 for anything other than a simpe 2 flute brazed carbide tool is cheap. With regar ...

    Re: Laser Wood Business Cards
    A message posted at WOODWEB's Business and Management Forum (11/24) -- I pretty much agree Rich. But I do remember a post a long while back where som ...

    Re: Shaper fence setup
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- I never mentioned anything about sizing parts in my post. I do occasionally use an outbo ...

    Re: Wire brushing lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (11/24) -- AM, you posted about turning an old wide belt into a wire brush machine. Can you ...

    Re: Woven wire mesh
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- I've used TWP (see Chris' post above). Good quality and big selection. I haven't compare ...

    Re: Glass in melamine
    A message posted at WOODWEB's Cabinetmaking Forum (11/24) -- Order panels to size in a RTF door cut for glass. Just cause the customer speced doesnt ...

    Re: Cam Support
    A message posted at WOODWEB's CNC Forum (11/24) -- for anyone that needs help with cnc codes/program i recommend Marek for sure. he helped us with al ...

    Re: What software to use?
    A message posted at WOODWEB's CAD Forum (11/24) -- Hi Jack, Here is a list of some guidelines I've posted before that you may want to use in your sea ...

    Re: Entry Level CNC machines
    A message posted at WOODWEB's CNC Forum (11/24) -- I don't hear anyone complaining about their camasters or boss routers either. I talked to a guy in ...

    Re: Entry Level CNC machines
    A message posted at WOODWEB's CNC Forum (11/24) -- I have been waiting for the opportunity to post this comparison. But seven years ago I bought a ne ...

    Re: Photo of my way to load big logs on the mill
    A message posted at WOODWEB's Sawing and Drying Forum (11/24) -- Very nice - thanks for posting that. ...

    Re: Fusion 360 to Biesse Klever 1530
    A message posted at WOODWEB's CNC Forum (10/24) -- Hi Peter. Not Fusion but we had a similar issue with SheetCam a few years ago. What we did was res ...

    Grizzly 3100Z Twin Drum Sander Belt Tracking Problems
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- If I am posting in the wrong place please let me know. I have a new to me Grizzly 3100Z ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/24) -- Ok. I pulled the trigger (see what udid there) and put the order in for the AAA cougar setup ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Family Man, You mixed up two posters. It's the OP @Brogan who said 10-15k/wk, ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/24) -- K Man, Read cabmaker's post. I didn't mix up anything. ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/24) -- K man, first paragraph last sentence of first post ...

    Re: Mohawk Piano Lacquer
    A message posted at WOODWEB's Finishing Forum (10/24) -- Dan, I also found out the same thing you did. Mohawk/CCI has a resin in that formula that cr ...

    Re: Marketing Advice / Inspiration
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Social media/Facebook It's free and you can post ideas and projects as they ar ...

    Re: Marketing Advice / Inspiration
    A message posted at WOODWEB's Business and Management Forum (10/24) -- Mail (not email) former customers a post card. Go visit them. Call them. You n ...

    Re: Recovering from burnout?
    A message posted at WOODWEB's Business and Management Forum (10/24) -- OK, I read all the posts. I suppose a lot of these don't affect my situation a ...

    Re: new tools for my shop have 1200 ft now moveing too 8000 spot
    A message posted at WOODWEB's Cabinetmaking Forum (10/24) -- I'll agree with the posters above. We bought a used CNC in April, followed closely by a ...

    Re: Restaurant Vanity
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/24) -- Hello All,Im working on an ADA kitchen and wonder if the clearances ...

    Re: Millwork walls in cabinetvision??
    A message posted at WOODWEB's CAD Forum (10/24) -- Are you on the CV forum? There's a great post about this. Basically, set up a constr. method to do ...

    Re: Any proficient Mozaik users here? I am considering it and have question
    A message posted at WOODWEB's CAD Forum (10/24) -- Frank, I've been really impressed with your helpful response and no BS attitude on other posts and ...

    Re: Microvellum Users--I need your input
    A message posted at WOODWEB's CAD Forum (10/24) -- I've had it with MV. The time cost of rebuilding everything, the poor responses to various things ...

    Re: 2023 CR Onsrud Router Defective Phenolic Table
    A message posted at WOODWEB's CNC Forum (9/24/24) -- I currently run a CR Onsrud Router that is approaching 10 years in age. I haven't had a ton of p ...

    Re: Vanishing Act
    A message posted at WOODWEB's Architectural Woodworking Forum (9/24/23) -- Good luck with resolving the situation and moving forward (I mean that sin ...

    Re: wood finishing
    A message posted at WOODWEB's Finishing Forum (9/24/21) -- Nancy, can you post a pic or two so I can see what the problem looks like please? ...

    pressure problem
    A message posted at WOODWEB's Finishing Forum (9/24) -- I'm looking for some advice to hopefully point me in the right direction since there are so m ...

    Re: Shaper questions for doors
    A message posted at WOODWEB's Cabinetmaking Forum (9/24) -- I build all my own doors and I have for the last 17 years. All are done on a single 1 1/4 ...

    Re: Onload/Offload
    A message posted at WOODWEB's CNC Forum (9/24) -- I have a Biesse RoverS with 4x8 table. Cabinet vision produce the file for nesting and it nests by ...

    Re: Removing Blue Tape Residue
    A message posted at WOODWEB's Finishing Forum (9/24) -- VM&P Naptha..... within hours of spraying will not affect a precat or post cat product... ...

    Re: Drying black locust
    A message posted at WOODWEB's Sawing and Drying Forum (9/24) -- So the black locust trees are being felled at the end of November, a good time to do ...

    Re: Oak grain with solid white f8nish
    A message posted at WOODWEB's Finishing Forum (9/24) -- Sorry to steer this post off topic but was very curious with Kevin's approach. Kevin, are you ...

    Re: Box joint machine
    A message posted at WOODWEB's Solid Wood Machining Forum (9/24) -- Hey! That's my machine, no I mean literally that's my pic. Can't remember where I ...

    Re: Milesi questions
    A message posted at WOODWEB's Finishing Forum (8/24/24) -- We typically spray Resisitant , it’s a post cat , but recently we have been using some Mil ...

    Re: Has anyone used the small part holding tape?
    A message posted at WOODWEB's CNC Forum (8/24/24) -- Back to the original post. Just a general question as to whether this holds up to their claims. ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- Not sure this is the best place for this post. Hard to get a professional to denegrate ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Inter ...

    Re: curved kitchen curved doors
    A message posted at WOODWEB's Cabinetmaking Forum (8/24/21) -- The Question in the previous post I made, is a question for cabinetmaker ...

    Re: And its about to get much worse
    A message posted at WOODWEB's Business and Management Forum (8/24) -- I figured out why it takes you 53 weeks to pay your bills, you have no employee ...

    Re: Ruh Roh
    A message posted at WOODWEB's Business and Management Forum (8/24) -- Tim The trouble with the vagaries you wallow in is that they are ambiguous and ...

    Black Walnut Finishing
    A message posted at WOODWEB's Finishing Forum (8/24) -- Hello, Admitted Finishing-Rookie here attempting to make sure I do this properly. All other w ...

    Re: Black Walnut Finishing
    A message posted at WOODWEB's Finishing Forum (8/24) -- l agree epoxy. l like Smiths clear penetrating epoxy sealer (cpes). Soaks in and buttons thin ...

    Re: Lacqure finish cracking over paint
    A message posted at WOODWEB's Finishing Forum (8/24) -- Ok Usually post cat and precat shouldn't be mix but if it's just the primer it should work ok ...

    Re: Lacqure finish cracking over paint
    A message posted at WOODWEB's Finishing Forum (8/24) -- I'm posting my replies too fast!! I also second what Rich said I would just use clawlock as m ...

    Re: Lacqure finish cracking over paint
    A message posted at WOODWEB's Finishing Forum (8/24) -- Could you tell us what products are you using? The catalyze lacquer,is it pre cat or post cat ...

    Re: Implementing Top Solid
    A message posted at WOODWEB's CAD Forum (8/24) -- Topsolid is an essential part of my business. Made a huge difference in our layout/engineering/shop ...

    Re: cabinet software shopping...
    A message posted at WOODWEB's Cabinetmaking Forum (8/24) -- John, Thanks for the info. I mis-read your post, thought you were saying YOU were down th ...

    Alphacam refusing to properly nest multiple copies
    A message posted at WOODWEB's CNC Forum (7/24/24) -- As a form of introduction - I have 'inherited' a CNC without receiving any training whatsoever a ...

    Re: Adjustable black cabinet legs for eurocabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/24/24) -- Harold, thanks for the post. The alibaba connection is worth looking into it. I will s ...

    Re: Cnc service, or lack of?
    A message posted at WOODWEB's CNC Forum (7/24) -- Thanks for the input everyone, I think these companies are very large and they sell products in so ...

    Re: Why are these end panels bowing?
    A message posted at WOODWEB's Cabinetmaking Forum (7/24) -- I have found that how a panel is supported post pressing and finishing is critical to kee ...

    Can anyone recognize this control?
    A message posted at WOODWEB's CNC Forum (7/24) -- Trying to find a post for a Felder CNC. Anyone seen this before? If so, what machine/control? TPA\A ...

    Re: Bit of an odd question about getting samples
    A message posted at WOODWEB's Finishing Forum (7/24) -- Thanks guys. Sorry for lack of clarification. Never looking specifically for free. We are mor ...

    Re: RIP Want Ads -- NOW where do I go for fresh blood?
    A message posted at WOODWEB's Business and Management Forum (7/24) -- I know I'm a bit behind as this was an convo from several months ago, but we're ...

    Re: Contact Roller for Wide Belt
    A message posted at WOODWEB's Solid Wood Machining Forum (7/24) -- I will post an in depth response later this evening. 45 shore is just about perfec ...

    Re: Should I upgrade to CV8?
    A message posted at WOODWEB's CAD Forum (7/24) -- I didn't specifically address crashes in my post above. Very rare for me. Currently I have CV runni ...

    Re: Installing & painting moulding
    A message posted at WOODWEB's Finishing Forum (6/24/24) -- It's been a while since your post, but I'd like to add some information. If you're new to ...

    Re: Can I get a reality check on current cabinet door prices
    A message posted at WOODWEB's Cabinetmaking Forum (6/24/22) -- Just wanted to follow up on this because something interesting happened to me since po ...

    Re: Compressed wood for bending
    A message posted at WOODWEB's Furniture Making Forum (6/24) -- Elia I can't answer your question but on a similar note there was a company in 2004-20 ...

    Re: Spraying conversion varnish vertically
    A message posted at WOODWEB's Finishing Forum (6/24) -- Thank you Jim. I will definitely try that and keep you posted. Gary, by my last topcoat, I tr ...

    Re: 16"/20" 4 post import planers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/24) -- For some reason Powermatic, and other importers from Asia, make the dust collectio ...

    Re: 16"/20" 4 post import planers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/24) -- If your in the midwest, there is a 24" Buss on Chicago craigslist right now f ...

    Re: Pocket Holes
    A message posted at WOODWEB's Cabinetmaking Forum (6/24) -- I've used pocket holes for years and will continue unless they invent something better. O ...

    Re: cruisers
    A message posted at WOODWEB's Sawing and Drying Forum (6/24) -- Jon, have you tried posting on the Forestry forum part of Woodweb? You might get a be ...

    Re: 2-D autocad user but want 3-D
    A message posted at WOODWEB's CAD Forum (5/24/24) -- Dan, a few people have mentioned to me that Acad 3d is not as fun as SketchUp. One of the best s ...

    Re: Kem Aqua Plus - Dark Colors
    A message posted at WOODWEB's Finishing Forum (5/24/23) -- I did not get a sample chip, just a smear on the top of the can. Since posting I have cont ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/24/22) -- I am not sure how much spraying you do, but I have had troubles spraying some very thick c ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/24/22) -- Scott, If your Sata gun is rated for 40psi it will have a hard time getting the hoop thru ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/24/22) -- Priming with the clawlock is complete. Today was 79 degrees and 27% humidity in my shop. I ...

    Maybe a dumb question?
    A message posted at WOODWEB's Finishing Forum (5/24) -- So what exactly is the difference between pre-cat and post-cat? Now I know the definition but ...

    Re: Turbine hvlp spray set up
    A message posted at WOODWEB's Finishing Forum (5/24) -- Is this post really old or something? Modern turbines like the Fuji 3 stage will spray water- ...

    File Management
    A message posted at WOODWEB's CNC Forum (5/24) -- I thought I already posted a question but must have fouled it up so my apologies if this is a dupli ...

    Re: Selling an Architectural Millwork Business
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Thanks for the business genius comment, I’ll take that! That’s the true net (th ...

    Re: Selling an Architectural Millwork Business
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Just an FYI - you can post a Business for Sale listing at WOODWEB's Classified ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- I don't think M3 is particularly apt to inflation. Inflation by definition is a ...

    Re: darkening wood
    A message posted at WOODWEB's Finishing Forum (5/24) -- Update to my own post. After the panic settled down i checked the rest of the load with a han ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- interesting response cabmaker most people when well and truly shot down as you ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/24) -- Just for Pat...was glad when you chimed in finally. Two or three days without y ...

    Re: red oak TOO dry?
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- The information is in DRYING HARDWOOD LUMBER, see page 99 plus. It is free, can be copied ...

    Re: red oak TOO dry?
    A message posted at WOODWEB's Cabinetmaking Forum (5/24) -- Gene, You should edit the Wiki post ...

    Re: New Construction Trim Installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/24) -- I appreciate all of the responses, tips, ideas and honesty. Before my ...

    Re: Edgebanders
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- When I first read through your post, I thought you were referring to glue pots driven fro ...

    Re: Edgebanders
    A message posted at WOODWEB's Cabinetmaking Forum (4/24) -- I have owned only hokzher banders , so I don't have experience with glue pot machines , b ...

    Re: Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/24) -- Dear God I am glad yopu made it, I have a friend who did not. so many have no i ...

    Re: Kem aqua plus white spraying technique
    A message posted at WOODWEB's Finishing Forum (4/24) -- Nick, I read some old posts and you mention that you use bin with the Kem Aqua Plus. I use bi ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24) -- Thanks David.........nice lesson for everyone. We of course do similar work. ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24) -- Thanks for posting that Dave. Do you have any shots of the molding in it's in ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/24) -- Great posting, thanks! Would love to see a short video of the actual cutting. ...

    Re: Learning Curve: eCab to CV
    A message posted at WOODWEB's CAD Forum (4/24) -- I got it. Cabinet Vision. My apologies for wasting posts. ...

    Passing of Gene Wengert - "The Wood Doctor"
    A message posted at WOODWEB's WOODnetWORK Forum (3/24/25) -- The staff at Woodweb is saddened to hear of the recent passing of Gene Wengert, known as ...

    Re: SW gallery
    A message posted at WOODWEB's Finishing Forum (3/24/24) -- old post but i need to update some info i said previously. Apparently, the original gallon ...

    Re: Hinge replacement
    A message posted at WOODWEB's Cabinetmaking Forum (3/24/23) -- Mr. Lee If your hinge is one of the "Big 4" manufacturers of Concealed hinge ...

    Re: Happy springtime neighbors!
    A message posted at WOODWEB's Furniture Making Forum (3/24) -- Wen is about the lowest end out there. I'd never pay retail for anything like that esp ...

    Re: any opinions on the Delta 46-460 midi-lathe?
    A message posted at WOODWEB's Furniture Making Forum (3/24) -- I would be posting your lathe questions on a wood turning forum. You'll get a bigger a ...

    Re: Line boring or CNC boring
    A message posted at WOODWEB's Cabinetmaking Forum (3/24) -- Great info in this thread. We were in a similar situation as you with a slightly larger s ...

    Re: Line boring or CNC boring
    A message posted at WOODWEB's Cabinetmaking Forum (3/24) -- This really is a good post. All of the comments are valid. It is a big investment for a s ...

    Re: CAD / CAM Question
    A message posted at WOODWEB's CNC Forum (3/24) -- Hello Tom, Enroute is pretty simple to use and configure an ATP to automatically nest and toolpath ...

    Re: Powder post or Ambrosia?
    A message posted at WOODWEB's Sawing and Drying Forum (3/24) -- >My experience is that lyctid PPB channels run longer with the grain. Hope that's ...

    Re: Pricing for finishing cabinet doors
    A message posted at WOODWEB's Finishing Forum (3/24) -- Mastercabman you said you only need 2-3 coats of any finish (1sealer/1-2topcoats) yet your la ...

    Re: Line boring or CNC boring
    A message posted at WOODWEB's Cabinetmaking Forum (3/24) -- I will advise you to be wary of any machine specific forum because you will get, and will ...

    Re: Pricing for finishing cabinet doors
    A message posted at WOODWEB's Finishing Forum (3/24) -- mastercabman, you need to read your own posts!! [I typically put 1 coat of sealer (2 if I'm g ...

    Re: CAD / CAM Question
    A message posted at WOODWEB's CNC Forum (3/24) -- Enroute stuff is great if you are a beginner post processors for every machine available on the mar ...

    Re: Powder post or Ambrosia?
    A message posted at WOODWEB's Sawing and Drying Forum (3/24) -- "or just attack/feed in the cambium area" Depends on species and level of i ...

    Re: Pausing in Woodwop, HOPS, and Biesseworks
    A message posted at WOODWEB's CNC Forum (3/24) -- We started flipping sheets or 6 sided machining about 6 years ago. Works great. Our philosophy with ...

    Re: Wood Identification
    A message posted at WOODWEB's Sawing and Drying Forum (3/24) -- No one can say with any certainty what it is based on one fuzzy image of stained flat ...

    Re: hinge for flip up bench
    A message posted at WOODWEB's Cabinetmaking Forum (3/24) -- thanks Mike for posting the pics. I need a hinge that install on the edge of two boards. ...

    Re: 2nd CNC
    A message posted at WOODWEB's CNC Forum (2/24/25) -- Correct, I do not believe that V Carve sends out a (.CIX) file format, the preferred file import ...

    Re: conversion varnish looks slightly milky when applied in cooler weather.
    A message posted at WOODWEB's Finishing Forum (2/24/25) -- Can you post a pic? While I think it’s blush I have to admit to having shot a lot of CVs i ...

    Re: Rikon Bandsaw Drive Belt Problem
    A message posted at WOODWEB's Architectural Woodworking Forum (2/24/23) -- I had a great conversation with a member of the support team at Rikon afte ...

    Re: Going over a nitro cellulose with a Precat
    A message posted at WOODWEB's Finishing Forum (2/24/22) -- Most of the responses are greatly appreciated, especially since I will go with a Precat on ...

    Re: Hinge and Door Help for Frameless Cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (2/24/22) -- Blum and other suppliers post pretty good info on their hardware as to specs and load ...

    Re: Ripsaw versus moulding machine for solid wood panel
    A message posted at WOODWEB's Cabinetmaking Forum (2/24) -- RE: Starving a joint from over clamping with PVA.... This topic seems to get beaten to de ...

    Re: End Trimming on 45 Degree Shelves
    A message posted at WOODWEB's Cabinetmaking Forum (2/24) -- I have a Festool trimmer as well and, as Derrek already posted, it doesn't work very well ...

    Re: Cabinet Pro software
    A message posted at WOODWEB's CAD Forum (2/24) -- Frank, Let the software speak for itself. Also, let the people who are using your software speak fo ...

    Re: NC Hops
    A message posted at WOODWEB's CAD Forum (2/24) -- We also have a 7225 pro master. It turns out that we were initially having problems with the 32 bit ...

    Re: Correct glue for stile & rail doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/24) -- TB2 for me as well. Maybe post a pic? Sometimes we see things in our work that nobody is ...

    Re: Conventional vs HVLP
    A message posted at WOODWEB's Finishing Forum (2/24) -- Your post, Nick, came in as I was beginning this reply. The research I have done on conventio ...

    Re: Bidding Jobs
    A message posted at WOODWEB's Business and Management Forum (2/24) -- Michael, I can't seem to see the image without downloading it- something I don' ...

    Re: First Big Wall-art: it cupped...
    A message posted at WOODWEB's Finishing Forum (2/24) -- Sorry to leave you hanging. Here's a picture of the status. (I expect to hear "pings&quo ...

    Polyester
    A message posted at WOODWEB's Finishing Forum (2/24) -- Who can tell me about polyester coatings and their difficulty as opposed to post cat conversi ...

    Re: tooling for cabinet parts
    A message posted at WOODWEB's CNC Forum (2/24) -- Rich C., I have the PC 7518 router. Robert, I did post at the camheads forum and got several helpfu ...

    Re: Powermatic 2700 shaper spindle bearing replacement
    A message posted at WOODWEB's Cabinetmaking Forum (2/24) -- Check this out... http://www.woodweb.com/cgi-bin/forums/swmf.pl?read 768261 It's not real ...

    Re: tooling for cabinet parts
    A message posted at WOODWEB's CNC Forum (2/24) -- Kevin.... With all respect to you and WOODWEB, you should seriously consider posting your request a ...

    Re: tooling for cabinet parts
    A message posted at WOODWEB's CNC Forum (2/24) -- Not to poach Kevin's post but in compliment, are most who are running pre-fin ply running solid car ...

    Re: Sintex moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- Can you post up a couple of pictures? I've only done belts on my Compact 23 moulde ...

    Re: Kremlin pump
    A message posted at WOODWEB's Finishing Forum (2/24) -- Thanks I will try all your suggestions and report back so others can learn from this post. ...

    finishing wood top debate
    A message posted at WOODWEB's Finishing Forum (2/24) -- We completed a kitchen of about 60 lineal feet of 2-1/2" thick walnut tops. we did miter ...

    Re: Buffing/smoothing a painted finish
    A message posted at WOODWEB's Finishing Forum (1/24/23) -- This is kind of interesting I ordered a sample kit from Renner to try out I sprayed some d ...

    Re: eCabinets interest seems to have faded
    A message posted at WOODWEB's CAD Forum (1/24/22) -- Thanks, but I guess I was not clear. I could not edit the thread title once posted, and mis-type ...

    Re: Solid wood steps
    A message posted at WOODWEB's Furniture Making Forum (1/24/22) -- You would likely get better responses posting in the architectural forum. Steps are ...

    Re: finish bleed through
    A message posted at WOODWEB's Finishing Forum (1/24) -- thanks for the reply's. I would need to check on the sealer/primer thing. I kind of pulled ba ...

    Re: Box Beam Construction
    A message posted at WOODWEB's Architectural Woodworking Forum (1/24) -- The reason for the 12-1 ratio is that is the way I was trained. Could have be ...

    Re: What to do with extra dust pipe
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/24) -- I bet if you post your location, and the sizes (Length x diameter ...

    Re: Theft in the shop?
    A message posted at WOODWEB's Business and Management Forum (1/24) -- I bought Blue Iris Profesional ip camera software, I think cost me $40 with a c ...

    Re: Theft in the shop?
    A message posted at WOODWEB's Business and Management Forum (1/24) -- Thought I had posted this, but I had a client that we wholesale lots of boxes t ...

    Re: Need some opinions
    A message posted at WOODWEB's Business and Management Forum (1/24) -- Skip , maybe a CNC shop for you . Amazing that one can tell what type of person ...

    Re: Bed/bath door hinge and lock set jig
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/24) -- Ml, I would be doing your typical slab solid or hallow core home depo ...

    Re: Scammer on Machinery Exchange
    A message posted at WOODWEB's Business and Management Forum (12/23/22) -- Hi all, I'm glad Mark avoided the scam before it was too late. At Woodweb, ...

    Re: mdf 1/4' round door
    A message posted at WOODWEB's CNC Forum (12/23/21) -- Hi Lukasz, I cannot tell from the pictures you posted but typically these doors are produced us ...

    Transitioning to CNC - Cost Per Sheet?
    A message posted at WOODWEB's CNC Forum (12/23) -- Hi all, I have a Multicam 4x8 cnc router w/ vacuum pump and I know how to program and run it. Lack ...

    Merry Christmas
    A message posted at WOODWEB's Solid Wood Machining Forum (12/23) -- Merry Christmas to everyone who Reads the forums post Post questions to this foru ...

    Re: Routing small parts in solid wood
    A message posted at WOODWEB's CNC Forum (12/23) -- Jason If you have a large order of the parts shown or it will be a return customer then a dedicate ...

    Re: software
    A message posted at WOODWEB's CAD Forum (12/23) -- Ozan, I am not sure if you are asking a question or making a statement. Perhaps you should reword ...

    Re: Post Cat vs CV
    A message posted at WOODWEB's Finishing Forum (11/23/23) -- Almost any Post Cat is much more durable(especially because of the thicker film finish), ...

    Altendorf WA80 (older model) rip fence fine adjustment mechanism
    A message posted at WOODWEB's WOODnetWORK Forum (11/23/22) -- Greetings ! Google has lead me to your lovely website, and perhaps here I can find the ...

    Re: Advice, What's my Worth
    A message posted at WOODWEB's Business and Management Forum (11/23) -- Office Manager (if that is your real name): Your lack of bidding experience mi ...

    Re: Mozaik CNC compatible with Weeke BHX055
    A message posted at WOODWEB's CNC Forum (11/23) -- Thank you all for your replies and helpful info. I have PM'd you with my questions re the Mozaik s ...

    Re: Something to be thankful for
    A message posted at WOODWEB's Business and Management Forum (11/23) -- I would be remiss if I did not respond to the economic side of Tim's post. If ...

    Re: Woven wire mesh
    A message posted at WOODWEB's Cabinetmaking Forum (11/23) -- I'm actually doing some research too...thought I'd post. ...

    Re: Something to be thankful for
    A message posted at WOODWEB's Business and Management Forum (11/23) -- Sign mentioned in previous post ...

    Re: Updated information on moulding/trim business needed
    A message posted at WOODWEB's Business and Management Forum (11/23) -- I too do not want to be only negative. But as 'helping hand' stated. The wood ...

    Re: Updated information on moulding/trim business needed
    A message posted at WOODWEB's Business and Management Forum (11/23) -- You'll probably find as many opinions on which equipment to start with as ther ...

    Re: Any of you guys do solid surface?
    A message posted at WOODWEB's Cabinetmaking Forum (11/23) -- I've been doing SS work for about 5 years now. I just bought a thermoforming oven today! ...

    Re: Cutting aluminum
    A message posted at WOODWEB's CNC Forum (11/23) -- There's been a little bit of everything on there. Interlam, modular arts, soelberg etc. The guys p ...

    MLC new post-cat primer
    A message posted at WOODWEB's Finishing Forum (10/23/21) -- For those of you who are using MLC product They will be phasing out clawlock 2 and it's b ...

    Re: MLC new post-cat primer
    A message posted at WOODWEB's Finishing Forum (10/23/21) -- It doesn't actually say how much time to pass before sanding. Only that it is quick to sa ...

    Re: MLC new post-cat primer
    A message posted at WOODWEB's Finishing Forum (10/23/21) -- Here is the PDF for the PI sheet for Kwik Claw ...

    Re: Fusion 360 to Biesse Klever 1530
    A message posted at WOODWEB's CNC Forum (10/23) -- We are using Fusion360 as well as other cabinet software to run our CNC machines including a 5x12 ...

    Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/23) -- Hello All, I work at a custom cabinetry shop in Loveland, CO. Currently our sh ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/23) -- There is a classified section here on Woodweb YMMV. There are other woodworkin ...

    Re: Mozaik - Are they still in business?
    A message posted at WOODWEB's CAD Forum (10/23) -- Bob, perhaps try another email? I just heard from them this morning that one way or another they w ...

    Re: New Woodweb design
    A message posted at WOODWEB's Business and Management Forum (9/23/21) -- Thanks for the initial feedback! I'll look at the "ad" issue, ther ...

    Re: alternative filler to Bondo
    A message posted at WOODWEB's Finishing Forum (9/23/21) -- Whoops on the Durham Rock Hard Putty, I failed to read Dan Cook's entire posting. I stand ...

    Re: Manually applying PVC edge banding
    A message posted at WOODWEB's Cabinetmaking Forum (9/23) -- Tom, Thanks, Thats pretty much what we had wound up doing. Doubling up helped. We also sw ...

    Re: up and down play on undermount slides
    A message posted at WOODWEB's Cabinetmaking Forum (9/23) -- I think every undermount slide from Grass, to Salice, to Blum, and even KV sample slides ...

    How Can This Be?
    A message posted at WOODWEB's Architectural Woodworking Forum (9/23) -- The CLT panels that were recently referred to to in a previous post are plywo ...

    Re: Concealed hinge boo boo
    A message posted at WOODWEB's Cabinetmaking Forum (9/23) -- If you would have read my post more carefully you would have seen that I was looking for ...

    Re: Time Per 3/4 ply sheet on CNC
    A message posted at WOODWEB's CNC Forum (9/23) -- Okay, good information, thanks. Can you post your tooling #? I'll give tabs another try as well. ...

    Re: Pay parity with other trades?
    A message posted at WOODWEB's Business and Management Forum (9/23) -- Wish I could edit, but after thinking about my post, I apologize for going a di ...

    Re: Unwanted J Cut
    A message posted at WOODWEB's CNC Forum (9/23) -- Could you post the section of the Gcode you are referencing. ...

    Re: Curly Maple Top
    A message posted at WOODWEB's Furniture Making Forum (9/23) -- Sorry, I haven't followed this thread since my earlier post, didn't think it needed el ...

    Re: face frame cabinet assembly
    A message posted at WOODWEB's Cabinetmaking Forum (8/23/23) -- Many of our customers use Lamello P-System connectors to attach their face frames to c ...

    Re: Hard to find Drawer & Door pulls
    A message posted at WOODWEB's Cabinetmaking Forum (8/23/22) -- OK, I've removed them and looked at the back. Basically nothing, please see the new po ...

    Re: Small/Open End Wide Belt Sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/23) -- I actually have the powermatic open ended sander in 3 phase with 7 1/2 HP. It has served ...

    Re: Drawer box notching
    A message posted at WOODWEB's Cabinetmaking Forum (8/23) -- I ended up ordering an Amana 20-40mm adjustable groover with side spurs. Should be here M ...

    Re: one or two ToolPath
    A message posted at WOODWEB's CNC Forum (8/23) -- Ok, will try and will post update. I have cut the same one on 1/4 with one path and had it down usi ...

    Re: Vcarve pro too slow cutting some shapes
    A message posted at WOODWEB's CNC Forum (8/23) -- Now I see your drawing in another post of yours and it is easier to see. Draw the geometry with str ...

    Re: How much did I under bid
    A message posted at WOODWEB's Architectural Woodworking Forum (8/23) -- The guy never said that he did the work yet and he didn't say that image was ...

    Re: alphacam support
    A message posted at WOODWEB's CAD Forum (8/23) -- Hello, if someone need help with Alphacam or post or create some VBA macros for this software i can ...

    Re: SPAX - Using Torx screws long term
    A message posted at WOODWEB's Cabinetmaking Forum (8/23) -- Has anyone actually used SPAX brand? I would like feedback on this specific brand from an ...

    Re: share my shop
    A message posted at WOODWEB's Cabinetmaking Forum (8/23) -- If you add some punctuation, I might read your post. ...

    Cnc service, or lack of?
    A message posted at WOODWEB's CNC Forum (7/23) -- I would like to think that I am not the only one with this issue, but I can’t get any help with my ...

    How to dry hemlock to keep bark on
    A message posted at WOODWEB's Sawing and Drying Forum (7/23) -- First post and I appreciate in advance your comments. I am looking to replace siding ...

    Re: Cnc service, or lack of?
    A message posted at WOODWEB's CNC Forum (7/23) -- Can you post some pictures ? We are all here to support you. I’ll spare you my stories. Fortunately ...

    Re: Which Air Compressor
    A message posted at WOODWEB's Business and Management Forum (7/23) -- I would agree that your suggested product line speaks to the lower end screws ( ...

    Re: residential/commercial
    A message posted at WOODWEB's Business and Management Forum (7/23) -- Probably true. The more practice at something the better you get. Establishing ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/23) -- I think we all posted at once--just caught this. Robert, Event Star was ages ag ...

    Re: Excel fraction w/ "
    A message posted at WOODWEB's WOODnetWORK Forum (7/23) -- I'll try to remember on what sheet I've done this and post what I did. It will be a few day ...

    Re: Should I upgrade to CV8?
    A message posted at WOODWEB's CAD Forum (7/23) -- OK, I'm likely going to do it. I just read a lot of posts on the forums about crashing. However, it ...

    Re: RUBBERWOOD
    A message posted at WOODWEB's WOODnetWORK Forum (7/23) -- David - you could try posting a "Wanted to Buy" listing at WOODWEB's Lumber Excha ...

    Re: NR carbide cutters for turning
    A message posted at WOODWEB's Furniture Making Forum (6/23/22) -- Brad, I would post your question on the AAW wood turning forum. A lot more knowledg ...

    Re: Biesse general questions
    A message posted at WOODWEB's CNC Forum (6/23) -- jason biesse work no need any dungle ,what you post its far from true the dungle only for extra: po ...

    Re: Adding Texture to .STL file
    A message posted at WOODWEB's CAD Forum (6/23) -- Thanks James. I may take you up on that offer. However was wondering if you could point me in the r ...

    Re: 16"/20" 4 post import planers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/23) -- I agree with David also. I bought a 24” SCM with a spiral carbide insert head used ...

    Re: Onsrud Z Axis Crash
    A message posted at WOODWEB's CNC Forum (6/23) -- I think what the other poster was saying is- Does your machine have some gas struts that hold the h ...

    Re: Sawstop underpowered
    A message posted at WOODWEB's Architectural Woodworking Forum (6/23) -- Actually the OP states in post #6 that a new belt solved the problem. I agree ...

    Re: Finishing AC Plywood
    A message posted at WOODWEB's Finishing Forum (6/23) -- Sorry for that double post. I'd suggest a better grade of plywood if that finish is unaccepta ...

    Re: Vegas or Bust Update
    A message posted at WOODWEB's Business and Management Forum (6/23) -- John, I would love to see your shop, and I will be really close by on the eveni ...

    Re: Heavy duty pull down closet poles
    A message posted at WOODWEB's Cabinetmaking Forum (6/23) -- Thanks Rick. I mentioned the electric one to client (around $600 ea) plus electrician etc ...

    Re: Charcoal grey spray stain???
    A message posted at WOODWEB's Cabinetmaking Forum (6/23) -- Can you post a photo of what your ending up with and a photo of what you want to end up w ...

    Re: Budgeting for packaging/shipping
    A message posted at WOODWEB's Business and Management Forum (6/23) -- Sorry, this is a different Robert than original poster. ...

    Re: Who Makes This Cutter?
    A message posted at WOODWEB's Cabinetmaking Forum (5/23/23) -- Charles GG Schmidt makes a couple different profiles with an easing on the inside edge ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/23/22) -- Ok. Black widow w/1.7 is out. Airless is in. I’m still gonna use the retarder. Rich, Again ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/23/22) -- I run either a 1.4 or a 1.8 depending on the material. Here is the gun: https://pittsburgh ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/23/22) -- Another gallon consumed. The airless worked great. They look good enough to skip the MLC r ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/23/22) -- Most hi transfer 65% gravity guns(still labeled HVLP) would use a 1.9n/n for heavy bodied ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/23/22) -- To sVe yourself the expense of AAA if its not something youd use a lot in the future, youd ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/23/22) -- I am not sure how much spraying you do, but I have had troubles spraying some very thick c ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/23/22) -- Clawlock should be used with 10% thinner minimum. I do 15%. Helps it level out. Resistant ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/23/22) -- Rich C, Please stay out of this topic. You're adding no value. And, if you took the time t ...

    Re: Exterior flush door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/23/22) -- Thanks David, I am going to build it egg crate style and I agree that the ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/23/22) -- Timmer, I’ve got a good Graco pump as well. I’ve never sprayed anything other than waterbo ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/23/22) -- Timmer, The airless setup you mentioned will give you fantastic results. If you are having ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/23/22) -- Timer If you're using a Graco pump,why are you thinning the primer? You add 10% of flow en ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/23/22) -- I pretty much said the same thing as Rich. I think the gun is the problem. ...

    Boring p-lam
    A message posted at WOODWEB's Architectural Woodworking Forum (5/23) -- I have a job in which I have to bore 5mm shelf holes in russian birch that ha ...

    Re: Music in the Shop
    A message posted at WOODWEB's Business and Management Forum (5/23) -- Please tell me what I am missing here? Reading this post was time well wasted. ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/23) -- Tim, This is what you cannot comprehend. I read for two hours a day or more. Se ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/23) -- Tim gets called Tim several times during each one of his monilogues at some poi ...

    Re: transitioning from p2p to router
    A message posted at WOODWEB's CNC Forum (5/23) -- I did excatly what you are doing, except I had Cabinet Vision and did not post to the ptp. I would ...

    Re: How would you approximate this finish?
    A message posted at WOODWEB's Finishing Forum (5/23) -- just a thought --- a buddy of mine rented a flooring sander from home depot in attempt to ref ...

    Re: 4-axis cnc software
    A message posted at WOODWEB's CAD Forum (5/23) -- Not a dumb question at all. I'm not qualified to answer your question, but that has never stopped m ...

    Re: Felder Format CNC
    A message posted at WOODWEB's CNC Forum (5/23) -- Your post while probably Well meaning can also give the appearance of a salesman looking to boost a ...

    Re: Felder Format CNC
    A message posted at WOODWEB's CNC Forum (5/23) -- Jim's advice is sound. Getting honest input about specific machinery and post sale experiences of c ...

    Re: Handy app for cabinet builders!
    A message posted at WOODWEB's Cabinetmaking Forum (5/23) -- Pat, James, the link I just posted works. ...

    Re: New to finish dept
    A message posted at WOODWEB's Finishing Forum (4/23/25) -- Hey Chris. So the shop manager has had a few electricians and HVAC ppl come look at the VF ...

    Re: Large custom knife for 5"Tx3"D arched heavy crown moulding? Laguna SSII
    A message posted at WOODWEB's CNC Forum (4/23/23) -- Are you looking for a shaper cutter head that will hold your own corrugated knife steel? I have ...

    Re: Painted exterior wooden treads
    A message posted at WOODWEB's Architectural Woodworking Forum (4/23/22) -- Mike, That is the most extreme, costly rot prevention protocols I have eve ...

    Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/23) -- I'm going to post this as anonymous. But you would recognize my handle if I lis ...

    NEKDA May 2-3
    A message posted at WOODWEB's Sawing and Drying Forum (4/23) -- Our New England Kiln Drying Association Spring Meeting is May 2 & 3 in Sayre, PA. ...

    Re: "off the stump" moisture content
    A message posted at WOODWEB's Sawing and Drying Forum (4/23) -- I looked in the dry kiln operator manual and it's showing the same MC as the original ...

    Re: Pic of radial splitting in yellow poplar see post below
    A message posted at WOODWEB's Sawing and Drying Forum (4/23) -- How long has this log been cut?? When I cut logs for fire wood I do not seal the ends ...

    Re: Pic of radial splitting in yellow poplar see post below
    A message posted at WOODWEB's Sawing and Drying Forum (4/23) -- these appeared as soon as the saw was off and I looked at the end of the log. ...

    Re: Trying to locate this drill bit
    A message posted at WOODWEB's Cabinetmaking Forum (4/23) -- Previous post just came up with the general page for drill bits. Specific link here.. ...

    Re: Creating Within V-Carve
    A message posted at WOODWEB's CAD Forum (4/23) -- Yes you can create drawings from scratch with V Carve. If you have experience with any CAD program ...

    Re: What's Fair & Reasonable
    A message posted at WOODWEB's Business and Management Forum (4/23) -- Here is an update: I charged the customer for the new tops. I credited the cost ...

    Re: Customer Mistake
    A message posted at WOODWEB's Business and Management Forum (4/23) -- I'll say again that I showed photos of 2 different installations, full counter ...

    Re: What's Fair & Reasonable
    A message posted at WOODWEB's Business and Management Forum (4/23) -- Tom, I think the reason you got a lot of responses because of this statement in ...

    Re: cnc accurecy
    A message posted at WOODWEB's CNC Forum (4/23) -- Rotating the part is a good test. Also, have you reviewed the actual code at the machine to compare ...

    Re: reception desk -solid walnut details
    A message posted at WOODWEB's Architectural Woodworking Forum (4/23) -- thankyou i am figuring how to post a normal size image. re architect she insi ...

    Re: Questions: re: carving wood blanks on one-side only
    A message posted at WOODWEB's Value Added Wood Processing Forum (3/23/23) -- NB For what it's worth, post editing is broken. After the first edit, fo ...

    Re: Replacement for Charles Neil's Blotch Control
    A message posted at WOODWEB's Finishing Forum (3/23) -- Yer right David and I shouldn't have posted the reply. It was mainly for others using an oil ...

    Re: Vcarve and Biesse
    A message posted at WOODWEB's CAD Forum (3/23) -- Running Vcarve on a 2016 Biesse Klever. Recently I got in contact with Courtney he has a written a ...

    Re: Laguna CNC
    A message posted at WOODWEB's CNC Forum (3/23) -- Shane- Contact V Carve and explain the problem to them. V Carve will write, edit, or provided a pos ...

    Re: Powder post or Ambrosia?
    A message posted at WOODWEB's Sawing and Drying Forum (3/23) -- My experience is that lyctid PPB channels run longer with the grain. ...

    Re: Mozaik
    A message posted at WOODWEB's CAD Forum (3/23) -- Just recently tried Mozaik again, and I think it's much improved from a few years ago. I've had som ...

    Re: Curts Thumb
    A message posted at WOODWEB's Business and Management Forum (3/23) -- This is great to see! I love what Saw stop has given the industry, and I really ...

    Re: being nice to your customer
    A message posted at WOODWEB's Business and Management Forum (3/23) -- Great post. I learned concept this the hard way. A while back when I was runnin ...

    Re: garage shop guy... am I hated?
    A message posted at WOODWEB's Business and Management Forum (3/23) -- Shaun, I think you just admitted you are the kind of guy this post was directed ...

    Filing edges on laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/23) -- We are having an internal disagreement on the best way to file the edges ...

    Re: My dilemma....
    A message posted at WOODWEB's Business and Management Forum (3/23) -- "Psychology is at the root of our businesses. Nobody exactly "needs&q ...

    Re: Delamination in red oak newels
    A message posted at WOODWEB's Adhesives Forum (3/23) -- There is indeed a lot of stress when a round dries. However, TB II gets much of its strength ...

    Re: Snipe on New 15" Grizzly Planer???
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23) -- Spiral head will not help with snipe. Reread BH's post Adjust the rollers. Taking ...

    Re: Cabnetware
    A message posted at WOODWEB's CAD Forum (2/23/24) -- It's done through the CnC Center in the hardware section. Members of the Cabnetware forum will h ...

    Re: Custom Cabinetry and remodeling
    A message posted at WOODWEB's Business and Management Forum (2/23/23) -- I have probably re-read this thread 10 times. I am definetly grateful for th ...

    Re: Going over a nitro cellulose with a Precat
    A message posted at WOODWEB's Finishing Forum (2/23/22) -- What a mess... First off is, it must be understood that all Nitro cellulose finishes are n ...

    Re: How many Millwork Shops Use a "Locator Plate"
    A message posted at WOODWEB's Architectural Woodworking Forum (2/23/22) -- If it is something that is not stable a steel post is imbedded in the fixt ...

    Re: making 6x6 fence posts
    A message posted at WOODWEB's Sawing and Drying Forum (2/23/22) -- I've understood and seen in some I've sawn that a 4x4, 6x6, etc sawn to the side o ...

    Re: Rotting cedar
    A message posted at WOODWEB's Architectural Woodworking Forum (2/23/22) -- I would only use pressure treated for direct contact with the ground now. ...

    Re: Cutting Miter fold Cove backsplash in solid surface
    A message posted at WOODWEB's CNC Forum (2/23) -- Please forgive my ignorance but I don't see how this is even geometrically possible. I didn't reall ...

    Re: Stile/Rail door machine - opinions?
    A message posted at WOODWEB's Cabinetmaking Forum (2/23) -- Ryan, Yes, they are expensive, that's why I'm trying to find out if they're really worth ...

    Re: New Shop! Setting up the dust collector
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/23) -- Oneida is a wonderful company. The sales rep who called me sugges ...

    Re: Drawing Wreathed Stair Parts
    A message posted at WOODWEB's CAD Forum (2/23) -- Rufus used to post on the WW from time to time. He used solidworks, although parametric I question ...

    Re: Microvellum resell
    A message posted at WOODWEB's CAD Forum (2/23) -- WOODWEB's Classified Exchange is available for posting this type of item for sale - just click on t ...

    Bidding Jobs
    A message posted at WOODWEB's Business and Management Forum (2/23) -- I have been building and installing for others for 20+ years. I now am in the s ...

    Re: Mozaik
    A message posted at WOODWEB's CAD Forum (2/23) -- They are constantly improving and bringing out new features. Support is via the web and forum based ...

    Re: Lumber Drying Workshop - March 11
    A message posted at WOODWEB's Sawing and Drying Forum (2/23) -- If you go look at the forum listing on 1-27 called Advance Kiln Drying workshop you w ...

    Re: Lumber Drying Workshop - March 11
    A message posted at WOODWEB's Sawing and Drying Forum (2/23) -- Thank you for posting the information on the Advanced Lumber Drying Workshop I look f ...

    Re: Independent New England Biesse Tech
    A message posted at WOODWEB's CNC Forum (2/23) -- Mark Tomlin posts here often. Ex-Biesse factory tech. Great guy. mark@cnccustomservices.com ...

    Re: using pre-finished plywood vs raw/unfinished
    A message posted at WOODWEB's Finishing Forum (1/23/22) -- Chemmy started his post writing that in the " early 2000's " his kitchens were 5 ...

    Re: Drying Red OAK 4X6 Green Wood
    A message posted at WOODWEB's Sawing and Drying Forum (1/23) -- The wood won't split into toothpicks but every piece will probably develop large crac ...

    Re: SS countertop software / Andi Stratos
    A message posted at WOODWEB's CNC Forum (1/23) -- Doesn't get much cheaper than that... Do you need to lay out the files as well as create G code? Fe ...

    Re: quilted maple
    A message posted at WOODWEB's Finishing Forum (1/23) -- Please post pics when your done or during the process as well..... It does sound like a fun p ...

    Re: Shop/workspace flooring solutions over rough concrete
    A message posted at WOODWEB's Cabinetmaking Forum (1/23) -- Check out the flooring forum on garage journal. There are like 130k posts there and a bun ...

    Re: Split along the glue joint - why?
    A message posted at WOODWEB's Architectural Woodworking Forum (1/23) -- Adam, Thanks for sharing your experience. With your test pieces - what kind o ...

    Edgebanding same as box or fronts?
    A message posted at WOODWEB's Cabinetmaking Forum (1/23) -- I posted this in the wrong forum so here goes in the correct forum: Got a debate with a f ...

    Re: Hatin
    A message posted at WOODWEB's Business and Management Forum (1/23) -- Excellent post and excellent point David I would love to see a picture of that ...

    Re: Theft in the shop?
    A message posted at WOODWEB's Business and Management Forum (1/23) -- Carlos: thanks for this. Can you post a link to the cameras you bought? Can you ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- Reread your post, missed the part about stock being too wide for the widebelt. Have yo ...

    Re: Sign making
    A message posted at WOODWEB's CAD Forum (1/23) -- Aj We have the pro version Cab you post a pic of what you are looking to make for a sign. Thanks Ja ...

    Re: Sherwood grey laq primer Product #
    A message posted at WOODWEB's Finishing Forum (1/23) -- Why not use E63W5 Kemvar White primer..... this is an excellent acid cured primer and has awe ...

    Re: Need some opinions
    A message posted at WOODWEB's Business and Management Forum (1/23) -- Family man. I will ride it out .I am a loyal guy. Larry ,I have other buss. But ...

    Re: Cabinet Vision and DXF Files
    A message posted at WOODWEB's CAD Forum (12/22) -- Nice catch Dropout. I missed that. Would be nice of the offending geometry was identified by the c ...

    Re: Adjusting large cabinet doors.
    A message posted at WOODWEB's Cabinetmaking Forum (12/22) -- I meant no insult to Mike. He posts frequently and has reasonable expectations. Dr Gene ...

    Re: Advice needed for new spray system
    A message posted at WOODWEB's Finishing Forum (12/22) -- Is anyone successfully spraying from original poster "2k poly, SW precat (~5 gallons/we ...

    Re: 6 hour Work Day....Is it Possible in the US?
    A message posted at WOODWEB's Business and Management Forum (12/22) -- This is why construction has been tanking since 2007. It would have tanked no ...

    Re: would you warranty this entrance door?
    A message posted at WOODWEB's Architectural Woodworking Forum (12/22) -- Thanks Joe. I used hydrote plywood. https://www.marine-plywood.us/mahogany_m ...

    Re: Accuspray Guns
    A message posted at WOODWEB's Finishing Forum (12/22) -- I use one to spray polyester using a 2.0 tip and pressurised PPS cup. works ok but the cup h ...

    Re: smooth wavy lines in ACAD w/o faceting?
    A message posted at WOODWEB's CAD Forum (12/22) -- Hello Lee, My experience has been that the CNC post processor will not process a spline because it ...

    Re: AutoCAD courses, fork in the road
    A message posted at WOODWEB's CAD Forum (12/22) -- To learn AutoCad will be the best think you will never feel you waste any time , it will pay you b ...

    Re: Cabinet Software
    A message posted at WOODWEB's CAD Forum (12/22) -- find the cad-design software that post to your CNC look software for offers most customization of ...

    Re: CNC spindle won’t close the chuck and grab the tool
    A message posted at WOODWEB's CNC Forum (11/22/22) -- JKL thank you, I considered it. But I’m in Miami Florida. They charge $150 an hour plus flight, ...

    Re: Custom Cabinetry and remodeling
    A message posted at WOODWEB's Business and Management Forum (11/22/22) -- Someone posted a link to this video years ago. I believe it to be especiall ...

    Re: Red Elm Cabinet Question
    A message posted at WOODWEB's Cabinetmaking Forum (11/22/21) -- One of the alternate joys of working wood that occasionally arises here at the 'Web i ...

    Re: Thermoform plastic laminate
    A message posted at WOODWEB's Cabinetmaking Forum (11/22) -- "but I am looking for a company that cant laminate a 6" diameter post with ver ...

    Re: Laser Wood Business Cards
    A message posted at WOODWEB's Business and Management Forum (11/22) -- Wood business cards have been around a long time. Several posts in the archive ...

    Re: motor upgrade on dust collector
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/22) -- John, In addition to Bill's correct post, lets say you did purch ...

    Updated information on moulding/trim business needed
    A message posted at WOODWEB's Business and Management Forum (11/22) -- My husband and I are looking to begin our custom moulding business. We are in ...

    Re: Glue line quality
    A message posted at WOODWEB's Business and Management Forum (11/22) -- Tom, Gary B has a nice solution using a bathroom scale on his web site, see hi ...

    Re: Gorilla glue, just curious
    A message posted at WOODWEB's Adhesives Forum (11/22) -- Kent, I know this is post is about GG but you're asking for advise after you've already used ...

    Re: Gorilla glue, just curious
    A message posted at WOODWEB's Adhesives Forum (11/22) -- The recent link points to Stewart McDonald. As far as I know, there is no better source for ...

    Re: Entry Level CNC machines
    A message posted at WOODWEB's CNC Forum (11/22) -- While I admit this is meant to be about machines.. How would you approach a really simple job as t ...

    Re: Gorilla glue, just curious
    A message posted at WOODWEB's Adhesives Forum (11/22) -- I contacted West Systems for advise on which of their glues to use. They took enough interes ...

    Re: Seeking Veneer Specialist
    A message posted at WOODWEB's Veneer Forum (11/22) -- Scott, WOODWEB has a resource available to assist in locating other woodworking professionals. ...

    Re: Old Tokiwa J/P questions
    A message posted at WOODWEB's Solid Wood Machining Forum (10/22/21) -- Thanks Bruce, I was able to find a Japanese auction/sale board that listed ver ...

    Re: Biesse Rover 20-NC400 Plus- Error Codes
    A message posted at WOODWEB's CNC Forum (10/22) -- ok that sounds to me like the iso 30 cone holder is not position all the way down. It is raised an ...

    Re: Help finding a hinge please.
    A message posted at WOODWEB's Architectural Woodworking Forum (10/22) -- picture that disappeared on last post ...

    Re: Sherwin Williams advance high gloss cratering
    A message posted at WOODWEB's Finishing Forum (10/22) -- Being honest with your client is the best way to go. Put the defective one up temporarily an ...

    Re: Sherwin Williams advance high gloss cratering
    A message posted at WOODWEB's Finishing Forum (10/22) -- I sprayed with sherwin Williams advance which I mentioned in the subject line but good to sp ...

    Re: Why?
    A message posted at WOODWEB's Architectural Woodworking Forum (9/22/23) -- If we are going to start criticizing hobby style woodworking, the site is ...

    Re: Business costs regarding choice of wood fence posts
    A message posted at WOODWEB's Sawing and Drying Forum (9/22/22) -- I think you should go for treated pine. It has really good quality and can boost a ...

    Re: Curved (bent) Glass for Windows
    A message posted at WOODWEB's Architectural Woodworking Forum (9/22/21) -- Chad, It looks like there's no caulking around the glazing tape. You proba ...

    Re: New Woodweb design
    A message posted at WOODWEB's Business and Management Forum (9/22/21) -- Will the posts be editable? ...

    Re: Spraying Waterbased Finish
    A message posted at WOODWEB's Finishing Forum (9/22) -- Hey Adam, I'm always happy to a reasonable discussion. I'm not a zealot of any kind, and alwa ...

    Re: Biesse 336 Rover XNC Setup Discs
    A message posted at WOODWEB's CNC Forum (9/22) -- Sorry for the delay in reposting but I had to go out of town for a funeral. Regardless, after tryin ...

    Re: Maksiwa Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (9/22) -- Richie sorry for late post to this thread I'm interested in buying makwisa. Edgebander ho ...

    Re: Kem Aqua plus Clear
    A message posted at WOODWEB's Finishing Forum (9/22) -- Steve i don't know why you think I'm an amateur woodworker I've been doing this all my life a ...

    Re: How do you compete with smaller shops?
    A message posted at WOODWEB's Business and Management Forum (9/22) -- Im with cabinet maker. How does the two man shop compete against the big boys. ...

    Re: Concealed hinge boo boo
    A message posted at WOODWEB's Cabinetmaking Forum (9/22) -- It would have been nice to know it was paint grade on your first post. That's a no braine ...

    Re: AlphaCam Profiling
    A message posted at WOODWEB's CNC Forum (9/22) -- Does Alphacam require that the circles be broken into two pieces. If I don't break my circles my po ...

    Re: Ideas on building desk
    A message posted at WOODWEB's Cabinetmaking Forum (9/22) -- Kilgore, I'm not sure if you're asking me or the original poster. Let me know and I'll re ...

    Re: Pattern Systems/Biesse Rover
    A message posted at WOODWEB's CNC Forum (9/22) -- Dylan Thank you for your response, the machine is a 2014 Rover A_S1332, we have had it for less tha ...

    Re: Professionalism
    A message posted at WOODWEB's Furniture Making Forum (9/22) -- red oaks - Often those that need to read woodworking 101 are the last ones to realize ...

    Re: Torsion Box Floating Shelves into Side of Kitchen Cabinets?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/22) -- Yes, it WAS fugly! (This is one of the pre-demo pictures.) That's why ...

    Re: Oversized Exterior 1 Lite Doors
    A message posted at WOODWEB's Architectural Woodworking Forum (8/22/21) -- This has been perhaps in of the best posts of late. Brings up a good item ...

    Re: curved kitchen curved doors
    A message posted at WOODWEB's Cabinetmaking Forum (8/22/21) -- Sorry to clarify I wrote in my second post that I could use thick enough wood staves t ...

    Re: And its about to get much worse
    A message posted at WOODWEB's Business and Management Forum (8/22) -- FM, I don’t understand your post? Why does it take you 53 weeks to pay your bil ...

    Re: KemVar Plus CV not hardening
    A message posted at WOODWEB's Finishing Forum (8/22) -- Hey Guys, Thanks for all the info and replies. I switched off this job as there was a delay a ...

    Dennis Bean
    A message posted at WOODWEB's Cabinetmaking Forum (8/22) -- I hope you will see this post Dennis. Does Salice make a stainless steel European hinge & ...

    Re: Curly Maple Mantle piece
    A message posted at WOODWEB's Finishing Forum (8/22) -- If you don't want to use BLO (Boiled Linseed Oil) try a clear stain base (MLC or SW) followed ...

    Re: Glue for 2" thick walnut treads
    A message posted at WOODWEB's Adhesives Forum (8/22) -- The Doc is right on to highlight the plastic resin glue. It has one advantage over the PVA gl ...

    Re: entry door builders - how would you handle?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/22) -- Mr Google - We don't put caulk between the panel and the molding since that i ...

    Re: Cnc carving
    A message posted at WOODWEB's CNC Forum (8/22) -- I see on the Aspire drop down there is a couple of of Omnitec posts. why don't you download the dem ...

    Re: Cnc carving
    A message posted at WOODWEB's CNC Forum (8/22) -- Which one? It works on my spectra but I had to do some tweaking to the post. I have aspire but it s ...

    Re: Large adjustable shelf span
    A message posted at WOODWEB's Architectural Woodworking Forum (7/22/25) -- If you went with 1-1/2" thick shelves you could embed a 1" T-ang ...

    Re: Crossroads
    A message posted at WOODWEB's Business and Management Forum (7/22/25) -- Thank you for the kind words of wisdom. They started drilling the holes toda ...

    Re: Temps and humidity
    A message posted at WOODWEB's Sawing and Drying Forum (7/22/23) -- My apologies, I wrote my question in hast. I am air drying first for about a month ...

    Re: vehicle for moving panel products
    A message posted at WOODWEB's Business and Management Forum (7/22/22) -- Hi RichC, hope your well.Lets try this...say that you did not get any invent ...

    Re: vehicle for moving panel products
    A message posted at WOODWEB's Business and Management Forum (7/22/22) -- Hi again RichC, that there is some helpful information. Now that your retire ...

    Re: 3D Cabinetry Rendering Website
    A message posted at WOODWEB's CAD Forum (7/22) -- That's a good idea, Tim. I'll post here when I have it added. ...

    Re: Cast or turned Aluminum Moldings
    A message posted at WOODWEB's Architectural Woodworking Forum (7/22) -- Harold: You might consider black locust as a suitable material. Before the ad ...

    Re: Stiles construction interior shaker doors
    A message posted at WOODWEB's Architectural Woodworking Forum (7/22) -- I'd like to interject a fact here. What makes wood warp (bow, twist, cup, etc ...

    Re: Painted White Oak
    A message posted at WOODWEB's Architectural Woodworking Forum (7/22) -- Patrick, White oak is the "original" New England area pressure trea ...

    Re: BauBuche LVL
    A message posted at WOODWEB's Architectural Woodworking Forum (7/22) -- Patrick or Gary.. I think woodweb is playing games with names. I did see the ...

    Re: BauBuche LVL
    A message posted at WOODWEB's Architectural Woodworking Forum (7/22) -- Joe, Did you happen to see my post about finding a pivot hinge for radius top ...

    Re: Turbosand
    A message posted at WOODWEB's CNC Forum (7/22) -- ...years later... I came across this post today while researching a question of my own and thought ...

    Re: CNC bit Chipping
    A message posted at WOODWEB's CNC Forum (7/22) -- post a picture of the bit.... ...

    Altendorf Set Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (7/22) -- Several years ago I had a guide for tuning up an F-45 altendorf sliding table saw. This s ...

    New wood door sill
    A message posted at WOODWEB's WOODnetWORK Forum (7/22) -- Wasn't sure where to post this but anyway...I'm putting in a new door that I made (stave co ...

    Re: Biesse CIX code
    A message posted at WOODWEB's CNC Forum (6/22/22) -- Hello, Bob! Can you post full manual for CIX format, plase? I can't found any documentations for ...

    Re: (one man shop) Questions and Machinery Needed For a New Cabinet Shop
    A message posted at WOODWEB's Cabinetmaking Forum (6/22) -- I was thinking of starting a company to build airplanes, I decided against it as I have o ...

    Re: (one man shop) Questions and Machinery Needed For a New Cabinet Shop
    A message posted at WOODWEB's Cabinetmaking Forum (6/22) -- I’ve been building cabinets for 20 years now and for a long time I struggled with the fac ...

    Re: Touch up
    A message posted at WOODWEB's Finishing Forum (6/22) -- Is the existing sheen more glossy than your spot spraying? Or is it less glossy, i.e., flatte ...

    Re: 16"/20" 4 post import planers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/22) -- No experience with them. But whatever price you are looking at today, add 25% for ...

    Re: Joints
    A message posted at WOODWEB's CAD Forum (6/22) -- Yes I agree with you 100%. As you noticed I am a beginner and I wanted a video just to start with a ...

    Re: milling spalted maple and pecan
    A message posted at WOODWEB's Sawing and Drying Forum (6/22) -- It's all a personal preference. The end use is how you decide to saw. I believe (I ca ...

    Re: Corner cabinet question for Dennis Bean
    A message posted at WOODWEB's Cabinetmaking Forum (6/22) -- Hi Al, I just now saw your post. I usually get notifications at 5:30am every morning but ...

    Re: Back in the finishing area with questions
    A message posted at WOODWEB's Finishing Forum (6/22) -- Get rid of the precats. And if you don't want to do that use a precat sanding sealer. They sa ...

    Re: Labor Market/Finding Workers
    A message posted at WOODWEB's Business and Management Forum (6/22) -- "Baby Boomers: Now approaching retirement age, the "boomers" are ...

    Re: New CNC offsetting approaching 90 degree corners
    A message posted at WOODWEB's CNC Forum (6/22) -- I went in and changed the acceleration (increased) of the X and Y axes, and that helped a bit. I al ...

    Re: Labor Market/Finding Workers
    A message posted at WOODWEB's Business and Management Forum (6/22) -- Would have told you what it meant for a hug but I'll just keep posting ;) So wh ...

    Re: how long to dry oak for barn construction
    A message posted at WOODWEB's Sawing and Drying Forum (6/22) -- Avoid sapwood of red oak as, with its sugars, it will attract insects and decay fungi ...

    Re: Mozaik Support
    A message posted at WOODWEB's CAD Forum (6/22) -- Scott, Which CNC router do you have that Mozaik cannot support? I ask this only out of curiosity be ...

    Re: Gorilla glue, just curious
    A message posted at WOODWEB's Adhesives Forum (6/22) -- Full Disclosure: I'm a new advertiser here, and a chemist; my company manufactures epoxy adhe ...

    SCM pratix s12 issue
    A message posted at WOODWEB's CNC Forum (5/22/24) -- Hi all. I have a problem with sintesi handheld on pratix s12 (2013). I had to replace a computer ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- Timmer, Just wondering if you have anyone close by that you can borrow a gun to try out. I ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- 10 hp compressor!?! Well that rules out CFM problems! So for me I invested into a AAA pump ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- Mastercabman, 10hp compressor w/60+/- gal tank. Brand new water separator and line drier. ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- I will purchase retarder before I continue painting. 1.7mm is the largest tip available fo ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- Sounds like this gun isn't suitable for spraying the clawlock. A 1.9 tip is what you shoul ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- Therea no standard on reduction or retarder its all dependant on your area, climate, and e ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- Sounds like temperature/humidity is really good 1.7 tip is a better choice for primer The ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- You shouldn't use the cheap lacquer thinner to mix You should use the MLC standard thinner ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- Yes harbor freight hvlp gun. Thinned to MLC’s spec it is unusable. I can’t imagine MLC wou ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- A little early to blame ML Campbell on their product when you are trying to flow a high so ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- Seems like you at least need to swap reducers, add retarder, and perhaps even go up in tip ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- "thinned 60%." Holly Molly!!!!! That's a lot! Something's not right! Even with f ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- Wrong gun for the application I'm sorry to say. That is your #1 problem. We have trouble s ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- Ya I would agree with Mastercabman , 60 % thinner is to much, you are going to end up with ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- Plum creek machine grade. A step above the super refined. Cnc machined on my 5x10 Northwoo ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- Timer Could you tell us what equipment are you using? Compressor? Psi settings? I primaril ...

    Re: ML Campbell post cat clawlock advise
    A message posted at WOODWEB's Finishing Forum (5/22/22) -- I forgot to ask What kind of lacquer thinner are you using in the clawlock? ...

    Re: Hardwood Ply Tariffs=%20Discontinued UV Coated Birch
    A message posted at WOODWEB's Business and Management Forum (5/22) -- Oh if it was only that simple. First, you are ignoring what has been repeated h ...

    Selling an Architectural Millwork Business
    A message posted at WOODWEB's Business and Management Forum (5/22) -- Hey Everyone, Anyone out there have success selling their Architectural Millwor ...

    Re: Press for laminations
    A message posted at WOODWEB's Architectural Woodworking Forum (5/22) -- It is all about volume. Enough of those things and the pneumatic cylinders ge ...

    Re: 3d printing slightly thin curved walls.
    A message posted at WOODWEB's CNC Forum (5/22) -- Thats funny we are purchasing an 3D SLA Printer for our shop to do some prototype , custom work, an ...

    Re: Solid 2012 R1
    A message posted at WOODWEB's CAD Forum (5/22) -- just got message,,,,,will post some same nc code in a few,,,,,, ...

    Re: Solid 2012 R1
    A message posted at WOODWEB's CAD Forum (5/22) -- Hello Chevy can you please help with a post processor. ...

    Re: RE: Sawmill pillow block bearing
    A message posted at WOODWEB's Sawing and Drying Forum (5/22) -- Worked over 50 years with bearings. A bearing should never have more than 25 to 30 pe ...

    Re: Outsourcing the financials
    A message posted at WOODWEB's Business and Management Forum (5/22) -- I feel fortunate. I can't imagine the trust needed to hire someone to do the &q ...

    Re: 4-axis cnc software
    A message posted at WOODWEB's CAD Forum (5/22) -- I run a 3-axis CNC with V-Carve Pro. It has 4th axis wrap and and control. The new version has the ...

    Re: Gorilla glue, just curious
    A message posted at WOODWEB's Adhesives Forum (5/22) -- Certainly, one can try to post their opinion without specifically attacking or degrading the ...

    Re: stained wood edge laminate counter
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/22) -- Thanks Bruce. That seems to make sense if I want a complete laminate top ...

    Re: Melamine warping after cutting
    A message posted at WOODWEB's Architectural Woodworking Forum (4/22/25) -- Hi Tom Yeah we usually do that as well. Let us say that we need a filler t ...

    Re: Melamine warping after cutting
    A message posted at WOODWEB's Architectural Woodworking Forum (4/22/25) -- Hi BH Davis The warping happens on MDF as well, but not to the same extent ...

    Re: Unique 2700 CNC door machine used a a cope machine?
    A message posted at WOODWEB's CNC Forum (4/22/22) -- Maybe it would be useful to go to the used machine market to post information about your machine ...

    Cabinet backs and box construction
    A message posted at WOODWEB's Cabinetmaking Forum (4/22) -- After reading all the good information in the post that Oggie started, I got thinking, wh ...

    Pic of radial splitting in yellow poplar see post below
    A message posted at sawdry (12/31) -- I was able to push the broken end of a tape measure into most of the splits on the end of each log Has anybody ...

    Thicknessing glue-ups: planer vs. wide-belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (4/22) -- Hoping for some advice. Sorry for long post. In the last few months, we've started ...

    Re: Valuable Timber?
    A message posted at WOODWEB's Forestry Forum (4/22) -- Mark, One variable you'll need to consider, that you didn't mention, is how many acres of timb ...

    Re: Questions: re: carving wood blanks on one-side only
    A message posted at WOODWEB's Value Added Wood Processing Forum (3/22/23) -- I'm convinced now that if the moisture content of the wood is at equilib ...

    existing span
    A message posted at WOODWEB's Architectural Woodworking Forum (3/22/23) -- I have a existing 10 x 10 rough sawn beam spanning 17'.5", on top of ...

    Re: Fusion 360 post for Masterwood Router
    A message posted at WOODWEB's CNC Forum (3/22/22) -- It is recommended to go to a platform like Amazon to take a look ...

    Re: MDF Door- Square Corner problem
    A message posted at WOODWEB's CNC Forum (3/22) -- Hi Karl, I am fairly confident that I have eliminated any issues with the geometry. I am running 2 ...

    Re: Steel table legs with timber feet
    A message posted at WOODWEB's Furniture Making Forum (3/22) -- I would recommend buying your stainless steel table legs from a commercial B2B store l ...

    Re: Table legs
    A message posted at WOODWEB's Furniture Making Forum (3/22) -- These are a bit pricey, but you could buy stainless steel table legs or base for the b ...

    Re: SBA Economic Injury Disaster Loans
    A message posted at WOODWEB's Business and Management Forum (3/22) -- I took advantage of your post yesterday thanks ...

    Re: Appliance Garage on Granite with tiled walls
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/22) -- Man, I feel like we are really getting off topic here my friendly fol ...

    Re: Thermwood cut center
    A message posted at WOODWEB's CAD Forum (3/22) -- Will is exactly right, you cannot and will not beat thermwoods service and you cant beat there rout ...

    Re: Sunhill shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- Hey Jared, if you have a sec would you post a picture of that spindle? I'm interes ...

    Re: Is there any cabinetmakers left?
    A message posted at WOODWEB's Business and Management Forum (3/22) -- Cabmaker, That's funny, I had a guy from the very same school having made the v ...

    Re: How it starts:
    A message posted at WOODWEB's Business and Management Forum (3/22) -- Thank you for taking the time to respond Pat, I have learned a lot from your po ...

    Re: counter top
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/22) -- Bob did a good post. My view is, I just wouldn't do an under mount in ...

    Re: pre cat
    A message posted at WOODWEB's Finishing Forum (2/22) -- 8 year warranty!!! I wish I could get that on my $47,000 van Im gonna buy! in 2.5 years, the ...

    Re: alphacam tool offset number
    A message posted at WOODWEB's CNC Forum (2/22) -- Dropout could be right, but some controls with limited offset numbers available in the offeset regi ...

    Re: Kundig uniq edgesander
    A message posted at WOODWEB's Cabinetmaking Forum (2/22) -- Extreme Woodworker on YouTube uses one in his shop I believe and on several of his videos ...

    Re: Power feeder speed question
    A message posted at WOODWEB's Cabinetmaking Forum (2/22) -- I guess you could check pricing on getting some gears made. I'm glad you posted though, I ...

    Re: MLC's Agualente vs. Agualente Plus
    A message posted at WOODWEB's Finishing Forum (2/22) -- I'm about to get some experience with the Plus. I ordered some pigmented Agualente from my su ...

    Re: Bubbles in paint finish
    A message posted at WOODWEB's Finishing Forum (2/22) -- Shane - I was hoping Bob would provide more information by answering the questions. He used t ...

    Re: How many of you are running your shop on lean manufacturing principles?
    A message posted at WOODWEB's Business and Management Forum (2/22) -- Mel, You seem to be kind of a new face on this forum. You have raised a lot of ...

    Re: Lumber Drying Workshop - March 11
    A message posted at WOODWEB's Sawing and Drying Forum (2/22) -- Thanks for posting this! ...

    Re: Mass production
    A message posted at WOODWEB's WOODnetWORK Forum (2/22) -- Hello, I see you have or had a need for a furniture manufacturer. My company has been at ca ...

    Re: Fusion 360 to Biesse Klever 1530
    A message posted at WOODWEB's CNC Forum (1/22) -- OK. It's been a few months since I posted this here as well as on the Autodesk Forums and it we hav ...

    Re: Drying Red OAK 4X6 Green Wood
    A message posted at WOODWEB's Sawing and Drying Forum (1/22) -- You run risks of complete failure of the wood and joinery, to powder post beetles hat ...

    heating finish (in-line heaters or others)
    A message posted at WOODWEB's Finishing Forum (1/22) -- i saw the neat set from the compressor postings and had a question about heating our finish. ...

    Re: Hatin
    A message posted at WOODWEB's Business and Management Forum (1/22) -- Skip, 11 out of the last 15 years have been good years in our industry. You can ...

    Re: Head Injuries from CNC frequency
    A message posted at WOODWEB's Business and Management Forum (1/22) -- "Somebody posted a story awhile back about ringing in your ears from heari ...

    Re: Large wood desk top with miters.
    A message posted at WOODWEB's Cabinetmaking Forum (1/22) -- I read his post, what walls? I dont see anything there that says its fixed between walls ...

    Re: CNC Solutions Dovetail Bit
    A message posted at WOODWEB's CNC Forum (1/22) -- Chuck can you post some info of the dovetail bits you offer? - I can't seem to find anything in the ...

    Re: MARKETING & SALES
    A message posted at WOODWEB's Business and Management Forum (1/22) -- The best strategy in marketing is to emulate what is working for others. To do ...

    Sherwood grey laq primer Product #
    A message posted at WOODWEB's Finishing Forum (1/22) -- I used some Sherwood primer on someone else's job once and it was great stuff. It was grey, l ...

    Re: MARKETING & SALES
    A message posted at WOODWEB's Business and Management Forum (1/22) -- Bet pat gilbert is lurking, waiting for people to give their ideas so that he c ...

    Re: I am at a loss and I have no idea what to do
    A message posted at WOODWEB's Finishing Forum (12/21/24) -- I wish you the best of luck with it. I hope the problem is easy to overcome and want to w ...

    Re: Dedicated Shaper Advice
    A message posted at WOODWEB's Cabinetmaking Forum (12/21) -- Im sure your question pertains to day to day work in a modest shop. I love the idea of h ...

    Re: Saw Stop
    A message posted at WOODWEB's Cabinetmaking Forum (12/21) -- A couple of things, first have you had your power system checked? With that many problem ...

    Re: Barrier coat question
    A message posted at WOODWEB's Finishing Forum (12/21) -- What's interesting is that I was on the phone posing this question with Vogel industrial coa ...

    Re: would you warranty this entrance door?
    A message posted at WOODWEB's Architectural Woodworking Forum (12/21) -- Joel, I read your post and can only comment on your finish schedule. I am a ...

    Need to kill some bugs
    A message posted at WOODWEB's Sawing and Drying Forum (12/21) -- I have the opportunity to get a lot of walnut (5000+ bf) from a friends widow who pa ...

    Re: refinishing cabinet doors
    A message posted at WOODWEB's Finishing Forum (12/21) -- Mark, your post scares me......spraying CV- through a window with a fan. Is it possible for ...

    Re: Resawing Questions
    A message posted at WOODWEB's Sawing and Drying Forum (12/21) -- First, watch the video posted on the Cabinetmaking Forum: Band saw blades: What to o ...

    Re: dust collector fills one bag much faster than the other
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/21) -- *correction: rereading my post I realized a mistake - a cyclone ...

    Re: Entry-level CNC for Small (1-2 man) Shop
    A message posted at WOODWEB's CNC Forum (11/21) -- I appreciate the responses; lots of good input and food for thought. Lots of add'l homework to do ...

    Re: Finish problems
    A message posted at WOODWEB's Finishing Forum (11/21) -- Thanks everyone! i will try the things you mentioned and post what happens. ...

    Re: Business And Management
    A message posted at WOODWEB's Business and Management Forum (11/21) -- read the archives here. this subject is brought up every six months or so and ...

    Re: Business And Management
    A message posted at WOODWEB's Business and Management Forum (11/21) -- In addition to David's post this is another pertinent watch https://youtu.be/m ...

    Re: Building A Spray Booth
    A message posted at WOODWEB's Finishing Forum (11/21) -- a little tough love do not build a booth out of flammable material, you are putting yourself ...

    Building A Spray Booth
    A message posted at WOODWEB's Finishing Forum (11/21) -- I am in the middle of building out a standalone garage to move my shop in to. To meet the ne ...

    Re: SPRAYING ILVA AND GRACO GX 19
    A message posted at WOODWEB's Finishing Forum (11/21) -- Thanks for the info guys! I had no email notification on the post so thought it just went un ...

    Re: Does Lean work on a construction site?
    A message posted at WOODWEB's Business and Management Forum (11/21) -- Pat, You posted your response while I was writing mine. The answer to your ove ...

    Re: Building A Spray Booth
    A message posted at WOODWEB's Finishing Forum (11/21) -- I'll offer, that being a professional forum, anyone posting here has installed and/or operat ...

    Re: Does Lean work on a construction site?
    A message posted at WOODWEB's Business and Management Forum (11/21) -- I'm going to ask Paul Akers. I will post his answer. ...

    Re: Cabinet door wood type
    A message posted at WOODWEB's Cabinetmaking Forum (11/21) -- No, not Alder. With a clear, natural finish they would look rather spotty. As mentioned ...

    Re: Entry Level CNC machines
    A message posted at WOODWEB's CNC Forum (11/21) -- I understand that thermwood routers are awesome, and I can see how the cut centers will be the way ...

    Re: Entry Level CNC machines
    A message posted at WOODWEB's CNC Forum (11/21) -- here is a video i did a while back, yes you can spend a lot more money and i am no fan of free.... ...

    Re: LSL Lamination Failure
    A message posted at WOODWEB's Architectural Woodworking Forum (11/21) -- One could always go back to the historical precedent that worked. The solid ...

    Re: 5 piece cabinet door screw up
    A message posted at WOODWEB's Cabinetmaking Forum (10/21/22) -- The time you spend typing this post, you could've done new ones already! move on, nex ...

    Re: Lacquer sanding sealer
    A message posted at WOODWEB's Finishing Forum (10/21/21) -- I certainly agree with the comments on mohawk’s monopoly and degradation of many of the g ...

    Biesse CIX code
    A message posted at WOODWEB's CNC Forum (10/21) -- Anyone have a good grasp of generating CIX code? I am trying to write a post for my app and the do ...

    Re: Waterborne finish on cherry
    A message posted at WOODWEB's Finishing Forum (10/21) -- Bob, Obviously, I can’t convince you of something you don’t believe. All I know is many peop ...

    Re: what works?
    A message posted at WOODWEB's Business and Management Forum (10/21) -- I'm in the same boat as you. I can't find help at a reasonable pay rate at all ...

    Re: CNC router life
    A message posted at WOODWEB's CNC Forum (10/21) -- I'm all for other people giving up on good old iron. All you need to keep them going is common sen ...

    Re: Edgebander brands
    A message posted at WOODWEB's Architectural Woodworking Forum (10/21) -- I would have to agree with the previous post about the IMA. I have ran Holz ...

    Re: woodmaster planer
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/21) -- Nice shop ! The amount of hose you have in your main line is kil ...

    Re: Life After SketchUp - which way to go?
    A message posted at WOODWEB's CAD Forum (10/21) -- Yeah, I know ... me again. But I just re-read the original post and remembered something I did a w ...

    Mystery sheet
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/21) -- I ended up hauling off 15 sheets for some leftover material from a gene ...

    Re: Outdoor Table Joinery
    A message posted at WOODWEB's Furniture Making Forum (9/21/21) -- Matt, that's an interesting idea. I saw your post in Johns old topic as well. I'll ...

    Re: Expired Champbel Agualente
    A message posted at WOODWEB's Finishing Forum (9/21) -- I concur with the boys. I’ve shot many buckets of Aguelente. I would definitely stir it reall ...

    Re: Super Kemvar
    A message posted at WOODWEB's Finishing Forum (9/21) -- The formula string H66XXW%^&* the facility used to match will tell you exactly which prod ...

    Re: Wood Top
    A message posted at WOODWEB's Furniture Making Forum (9/21) -- Rich, See my first post. I was not suggesting a plain miter joint at the corners. If I ...

    Re: Cost of Rework
    A message posted at WOODWEB's Business and Management Forum (9/21) -- Very interesting thread however I question how many posters are in the commerci ...

    Re: Ideas on building desk
    A message posted at WOODWEB's Cabinetmaking Forum (9/21) -- Hey Mark thanks for the response, I know that i can build it and it will be ok. I was jus ...

    Re: CNT Motion Series 1000 CNC Router
    A message posted at WOODWEB's CNC Forum (9/21) -- James the machine had win cnc when we bought but we installed MACH3 as wincnc was the basic license ...

    Re: How to do this
    A message posted at WOODWEB's Architectural Woodworking Forum (8/21) -- I think like another poster mentioned, the best option would be a chain morti ...

    Re: How to do this
    A message posted at WOODWEB's Architectural Woodworking Forum (8/21) -- Yes Pat,I quite agree.Scott,that is the one I mentioned in my above post. ...

    Re: Eclipse of the Sun
    A message posted at WOODWEB's Business and Management Forum (8/21) -- If you work as much as you post I don't know when you sleep. ...

    Re: Compensation for neighbor giving up space
    A message posted at WOODWEB's Business and Management Forum (8/21) -- That's what happens when you do your posting at 11pm on an ipad 😀. ...

    Re: Does your Kapex cut like this?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/21) -- Yes, I didn't see that post. Seems the most likely cause and most easily fixe ...

    Re: entry door builders - how would you handle?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/21) -- I am going to assume that you built these doors with molding stops. So the mo ...

    Re: Gorilla glue, just curious
    A message posted at WOODWEB's Adhesives Forum (8/21) -- Nothing much to add to the post concerning GG but I can empathize with Marco. I live in Mexic ...

    Re: Dyslexic Woodworkers?
    A message posted at WOODWEB's WOODnetWORK Forum (8/21) -- Dyslexia is a reading disorder. Each person has a different level of not being able to read ...

    Glazing tool
    A message posted at WOODWEB's Finishing Forum (7/21/25) -- A long time ago I thought I remembered seeing somebody post a link to a glazing tool to ge ...

    Re: Cabinetmakers opinion
    A message posted at WOODWEB's Cabinetmaking Forum (7/21/24) -- It looks like an office utility space to me. The post formed top is a bit of a giveawa ...

    A warning to newbies
    A message posted at WOODWEB's Business and Management Forum (7/21) -- Hi, I was thinking about it and I think I would like to post my experience for ...

    Re: HSK63f Spindle Tool
    A message posted at WOODWEB's CNC Forum (7/21) -- Can you post a picture of that tool, we need to purchase this too. ...

    Re: Keeping it local
    A message posted at WOODWEB's Business and Management Forum (7/21) -- Yes, what is 10 km from CBD? Yes, chipbored, I did this back in the early 90s a ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/21) -- "Pat -- I was referring to the ratio of undeveloped resources to able popu ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/21) -- Yes, exactly! But it has to be possible within the environment -- most employer ...

    Re: What to automate next?
    A message posted at WOODWEB's Cabinetmaking Forum (6/21/22) -- You need to look into Guffey systems. Finishing is your bottle neck then Guffey System ...

    How the heck can I give pricing?
    A message posted at WOODWEB's Business and Management Forum (6/21) -- We are stupid busy, like most of you. We are 4-5 months out for delivery of new ...

    Re: Wishy washy software
    A message posted at WOODWEB's CAD Forum (6/21) -- Fansastic idea Scott when you get this done. post a link where we can download your software for a ...

    Re: Using Alcohol Dye
    A message posted at WOODWEB's Finishing Forum (6/21) -- These are some really fundamental questions you're asking. I'd recommend reading some books o ...

    Re: Red, White Oak Air drying shrinkage time?
    A message posted at WOODWEB's Sawing and Drying Forum (6/21) -- Thanks guys, I was asking about the same question on another post and you have answer ...

    Re: Looking for Experienced Laminating & Solid Surfacing Providers
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/21/25) -- Please post these types of messages in our "Job Exchange", ...

    Re: Completely stain red oak wood
    A message posted at WOODWEB's Finishing Forum (5/21/22) -- Sorry group I was out of touch since I originally posted my question until now. I just rea ...

    Re: Exterior use of Sapele
    A message posted at WOODWEB's Architectural Woodworking Forum (5/21/22) -- If 85% of what RichC posts is inappropriate and basically useless I say we ...

    Re: Exterior use of Sapele
    A message posted at WOODWEB's Architectural Woodworking Forum (5/21/22) -- Nope, RichC and Dave's post are very useful ...

    Re: HELP WITH Z AXIS FAULT PLEASE
    A message posted at WOODWEB's CNC Forum (5/21) -- Rob - ok thanks but if you see in previous posts, the motor has been changed and been tested workin ...

    Re: millwork designer
    A message posted at WOODWEB's Architectural Woodworking Forum (5/21) -- Try to look at pinterest or deviantart. There, many designers post their work ...

    Re: alpha cam nested sheet re ordering
    A message posted at WOODWEB's CAD Forum (5/21) -- Sounds like your post outputs all sheets as one program. One way would be to split the sheets into ...

    faux beam installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/21) -- Hi, I'm referring to the post in this forum:No-Seam Faux Ceiling Beam ...

    Re: Adding a switch to an older sliding table saw
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/21) -- Yes your right. Not a 3phase switch, but one capable of connectin ...

    Re: Adding a switch to an older sliding table saw
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/21) -- I'll post the results, good or bad. We didn't get into details ye ...

    Re: Gorilla glue, just curious
    A message posted at WOODWEB's Adhesives Forum (5/21) -- Well now I just have to post on here again... Thanks again for mentioning gorilla glue on thi ...

    Re: Gorilla glue, just curious
    A message posted at WOODWEB's Adhesives Forum (5/21) -- Strident pronouncements and a commanded adherence to one person's world view do not a profess ...

    Re: Gorilla glue, just curious
    A message posted at WOODWEB's Adhesives Forum (5/21) -- I took a couple of pics of the adhesive I was talking about in my previous post. I had hoped ...

    Re: Large Commerical Bar Top
    A message posted at WOODWEB's Furniture Making Forum (5/21) -- Thanks BH! Actually, your reputation precedes your post - I'd already checked out your ...

    Melamine warping after cutting
    A message posted at WOODWEB's Architectural Woodworking Forum (4/21/25) -- Good day all. I have already read a thread about melamine warping after cu ...

    Re: Maple Burl Veneer Table Tops
    A message posted at WOODWEB's Veneer Forum (4/21/24) -- I just caught a typo in my post above. I should have written "We have never seen problem ...

    Re: Mechanical Fastner
    A message posted at WOODWEB's Cabinetmaking Forum (4/21/23) -- Lamello Clamex P connectors are an excellent countertop connector, and you can simply ...

    Re: Martin T78
    A message posted at WOODWEB's Cabinetmaking Forum (4/21/22) -- You might keep an eye on our Machinery Exchange - see link below. There are new machin ...

    Re: Looking for an advice on dowel cabinet construction methods
    A message posted at WOODWEB's Cabinetmaking Forum (4/21) -- Sorry for the double post! ...

    Re: Kem aqua plus white spraying technique
    A message posted at WOODWEB's Finishing Forum (4/21) -- Any problems with the Kem Aqua Plus primer? Someone on Woodweb said he had some chipping on b ...

    Re: Late payers affecting cashflow
    A message posted at WOODWEB's Business and Management Forum (4/21) -- First off, we require all first time orders to be COD. Depending on the job typ ...

    Dust Collection
    A message posted at WOODWEB's CNC Forum (4/21) -- Was tempted to post this in the DC forum but its CNC specific. Anyone care to share there best expe ...

    Re: Hinge replacements
    A message posted at WOODWEB's Cabinetmaking Forum (4/21) -- Sorry guys, I forgot to post the photo! Dennis, you're right as usual. Looks like it is a ...

    Re: Veneering 3mm Hardwood to 1-1/4" substrate
    A message posted at WOODWEB's Veneer Forum (4/21) -- Forgot attachement to above post ...

    Re: Angel investors
    A message posted at WOODWEB's Business and Management Forum (4/21) -- Is this post about wood working ? ...

    your recommendation for an automatic full-barrel shutoff
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/21) -- As in an earlier post, I'm putting together a 7-1/2 Hp cyclone wi ...

    Re: Table leg joint strength
    A message posted at WOODWEB's Furniture Making Forum (3/21/23) -- Thank you for this great idea of fixing the legs to the table top. I very much like ...

    SBA Economic Injury Disaster Loans
    A message posted at WOODWEB's Business and Management Forum (3/21) -- I posted this in another thread but I think this information is important for s ...

    Re: CA Tech/3M PPS system sputtering
    A message posted at WOODWEB's Finishing Forum (3/21) -- Thanks, we are using the pps1 system. I went back over the gun again and rescrubbed all the a ...

    Re: Lint in wet coat
    A message posted at WOODWEB's Finishing Forum (3/21) -- The post cat finish I use builds up a static charge when blowing off dust after scuffing. I w ...

    Re: HSK vs. ISO30 on New CNC
    A message posted at WOODWEB's CNC Forum (3/21) -- Trust me, if you ever used a sweep, you will never purchase a machine without one. I have never hea ...

    Re: Table Top Curve/ Warp
    A message posted at WOODWEB's Furniture Making Forum (3/21) -- Firstly this is a professional forum as stated in the posting rules and not suited for ...

    Re: Reface Oak Kitchen Cabinets With Painted Finish
    A message posted at WOODWEB's Cabinetmaking Forum (3/21) -- Thanks guys. I hear ya Family on the seams. My last two kitchens were painted and the oth ...

    Re: Powder post or Ambrosia?
    A message posted at WOODWEB's Sawing and Drying Forum (3/21) -- Ambrosia is a powderpost beetle. The PPB we really worry about is the lyctid PPB as i ...

    Re: woodwop users please step inside
    A message posted at WOODWEB's CAD Forum (3/21) -- not to rain on anyones parade but have you guyes seen the latest alphacam to woodwop post ,,,, solv ...

    Re: woodwop users please step inside
    A message posted at WOODWEB's CAD Forum (3/21) -- not to rain on anyones parade but have you guyes seen the latest alphacam to woodwop post ,,,, solv ...

    Re: RE: Wood changing colors
    A message posted at WOODWEB's Sawing and Drying Forum (3/21) -- IF it's done correctly it an be beautiful Spalt. Poplar and maple are the prettiest. ...

    Re: too much clamping pressure - starved joints?
    A message posted at WOODWEB's Cabinetmaking Forum (3/21) -- " switch to epoxy and it will solve all of your problems" If the problem is due ...

    Re: Tall oversized raised panels
    A message posted at WOODWEB's Cabinetmaking Forum (3/21) -- Unless cost is not an issue, I would convince them that they can save money by making a f ...

    Re: Side Mount Soft Close Slides
    A message posted at WOODWEB's Cabinetmaking Forum (3/21) -- What I found in my experience was that the box had to be built aboulutly spot on for it t ...

    Re: WideBelt Sander problem....
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21) -- Perhaps I am misunderstanding your post but it sounds like the rubber drum has som ...

    Re: New facility and beetles
    A message posted at WOODWEB's Sawing and Drying Forum (2/21/23) -- Powder post beetles can go dormant for many years. I would calculate in the cost o ...

    Re: Solid wood steps
    A message posted at WOODWEB's Furniture Making Forum (2/21/22) -- HI, It's not an ideal method for the small shop as a poster already said... BUT I d ...

    Re: I have admire the work on this car
    A message posted at WOODWEB's Architectural Woodworking Forum (2/21) -- David: I remember your posting about the possibility for creating veneered pa ...

    Re: Endgrain Inlay
    A message posted at WOODWEB's Furniture Making Forum (2/21) -- You have to love failure. It is a great way to see what doesn't work. Especially when ...

    Re: DIY kitchen cabinet making advice
    A message posted at WOODWEB's Cabinetmaking Forum (2/21) -- Jeffrey... You also haven't seen anything about the Wright brothers taking flight in a co ...

    Re: Weinig P700
    A message posted at WOODWEB's Architectural Woodworking Forum (2/21) -- I posted a link to Weinig USA below, talk to tech support, ask for James or R ...

    Re: RED new message notifier
    A message posted at WOODWEB's Cabinetmaking Forum (2/21) -- i have been experiencing something similar. Even though i read the messages it says new b ...

    Lumber Drying Workshop - March 11
    A message posted at sawdry (12/31) -- I cannot find anything regarding the March Advanced Lumber Drying Workshop being offered by the Penn State Exte ...

    Re: problems of tape marks on veneer.
    A message posted at WOODWEB's Veneer Forum (2/21) -- Deepak, Can you post a up-close photo? Tom ...

    Cosmec Conquest 250
    A message posted at WOODWEB's CNC Forum (1/21/25) -- The tool I was last cutting with is stuck in the spindle and will not release for a tool change ...

    Re: Overhead Costs
    A message posted at WOODWEB's Business and Management Forum (1/21) -- I appreciate all of your input on this. Alan F – I like the idea of including e ...

    Re: Used edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (1/21) -- we started off with an older used edgebander as well. really depends on how much you use ...

    Re: Cement board mantle
    A message posted at WOODWEB's Architectural Woodworking Forum (1/21) -- I read this post at the beginning of the year gave me a jolt a wakeup call to ...

    Re: Table top strip inlay adhesive
    A message posted at WOODWEB's Adhesives Forum (1/21) -- Greg, If you like the color Ipe, then at least cut the ends out of cross grain, so it matches ...

    Re: Costing estimates
    A message posted at WOODWEB's Business and Management Forum (1/21) -- Gary, the site i posted is the AWI book,, although it is 495.00 Now i guess you ...

    Re: OSHA
    A message posted at WOODWEB's Business and Management Forum (1/21) -- My intentions are to compare the Private vs Public opinions,, I have no reason ...

    Re: door wood
    A message posted at WOODWEB's Architectural Woodworking Forum (1/21) -- Well, I don't have much idea about it. if anyone has the picture of it, pleas ...

    Re: Coping sled
    A message posted at WOODWEB's Cabinetmaking Forum (1/21) -- Do you have a picture you could post for the homemade sled? ...

    Re: Rough lacquer
    A message posted at WOODWEB's Finishing Forum (1/21) -- Wow, I just reread your first post. If the primer is being a problem, I have never used retar ...

    Re: Need help diagnosing
    A message posted at WOODWEB's Veneer Forum (1/21) -- John S, rereading my post I want to apologize if it seemed a little harsh -- not meant to be. Yo ...

    Re: Looking for opinions on nested base routers
    A message posted at WOODWEB's CNC Forum (1/21) -- When I read the last post with the quote "Don't bite off more machine then you can chew", ...

    Re: black stained maple cabinets
    A message posted at WOODWEB's Finishing Forum (1/21) -- Bobby, The problem is most likely that you sealed the maple, prior to staining....By doing so ...

    Re: Need help diagnosing
    A message posted at WOODWEB's Veneer Forum (1/21) -- Hi John, no offense taken! I appreciate your responses because I know more today than I did yest ...

    Re: Got my homemade mill kind of running
    A message posted at WOODWEB's Sawing and Drying Forum (1/21) -- Thanks for posting. I've always wondered how you true up tire bandwheels. Hope the bl ...

    Re: Check out this 52" maple log
    A message posted at WOODWEB's Sawing and Drying Forum (1/21) -- Nice slabber. How do you keep sawdust from piling up? Now I know how to mill curve lo ...

    Re: How would you solve this problem
    A message posted at WOODWEB's Architectural Woodworking Forum (12/20) -- G/flex is a great product. I’ve posted on WW about it a few times over the y ...

    Turbine hvlp spray set up
    A message posted at WOODWEB's Finishing Forum (12/20) -- In the past I have had a well set-up spray rig with DeVilbiss hvlp guns, a pressure pot and ...

    Re: opinion about a sale
    A message posted at WOODWEB's Forestry Forum (12/20) -- Dave , John gave you some great info that I second mostly.....another I'd add is the location ...

    Stain Match - 49, Me - 7 - Fourth Quarter, Help!
    A message posted at WOODWEB's Finishing Forum (12/20) -- Hello, I received such great advice last time I posted I thought I would give it another sho ...

    Re: Valspar cv not drying
    A message posted at WOODWEB's Finishing Forum (12/20) -- I agree with Paul. If you done a sample with a fresh batch as per my first post using the or ...

    Re: Valspar cv not drying
    A message posted at WOODWEB's Finishing Forum (12/20) -- Thanks I will try it and post results ...

    Re: 2 Piece mdf doors
    A message posted at WOODWEB's CNC Forum (12/20) -- Do you have a model of the doors?Are you seeking a program that allows parametric adjustment of a ...

    1/2 inch compression Vs 3/4 inch melamine Burning
    A message posted at WOODWEB's CNC Forum (11/20/23) -- Hello Everyone, First time posting on here but have a dilemma. I have 2 SCM n100 CNC's and 1 Ho ...

    Widebelt roller recovering
    A message posted at WOODWEB's Solid Wood Machining Forum (11/20/23) -- I checked the old posts and none of the companies that can do widebelt rubber ...

    Re: PPB fungus
    A message posted at WOODWEB's Sawing and Drying Forum (11/20) -- The hole you see is the exit hole. An egg is laid, the larva forms and works it's wa ...

    Thermoform plastic laminate
    A message posted at WOODWEB's Cabinetmaking Forum (11/20) -- I'm not sure if Thermoforming is the correct term but I am looking for a company that ca ...

    Re: Finally - A Website
    A message posted at WOODWEB's Architectural Woodworking Forum (11/20) -- Very well put together! You'll have to make sure to post something when the ...

    Re: Finish problems
    A message posted at WOODWEB's Finishing Forum (11/20) -- Raymond, Did we talk about this about a year or more ago on the phone? I would like to see t ...

    Re: Soft close hinges
    A message posted at WOODWEB's Cabinetmaking Forum (11/20) -- I know it's late in this post, but for what it's worth, I really like the blum soft clos ...

    Re: what wood is this?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/20) -- Looks like it has powder post beetle damage as well! ...

    Re: laquer blushing
    A message posted at WOODWEB's Finishing Forum (11/20) -- Actually blushing can happen years after the finish has been applied. The “cloud” is actuall ...

    Travel/skid blocks
    A message posted at WOODWEB's Cabinetmaking Forum (11/20) -- Currently when we build a cabinet we are using a butt and screw method and post laminati ...

    Re: Interior Designer Commision
    A message posted at WOODWEB's Business and Management Forum (11/20) -- I'm having a hard time understanding why it is an issue what she drives, Ferra ...

    Re: Built in going between 2 walls?
    A message posted at WOODWEB's Cabinetmaking Forum (11/20) -- Shep, one other thing to consider when designing is to make sure you can maneuver it whe ...

    Re: Sanding MDF for paint
    A message posted at WOODWEB's Finishing Forum (11/20) -- i like the above post. see what works for you.. . and on a side note, i would be weary of an ...

    Re: Sanding MDF for paint
    A message posted at WOODWEB's Finishing Forum (11/20) -- Guys, thanks for your help, this has been great. I'm going to take this to the lab and do so ...

    Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (11/20) -- I have recently purchased a used Delta/Invicta DC-33 planer (model 22660) and am ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (11/20) -- Ken, thanks for this. Yes of course the knives should be parallel to the head. An ...

    Re: Outputting 2 "Z Values" in Mozaik?
    A message posted at WOODWEB's CAD Forum (10/20/22) -- I'd imagine that's in the post, or the controller deciding which tool uses which Z. What machin ...

    CNC improving edge cut quality when using compression bits
    A message posted at WOODWEB's CNC Forum (10/20/21) -- Hi, I use 1/2 inch compression bits for cutting 3/4 inch ply, mdf and ply with melamine sheets. ...

    Re: CNC improving edge cut quality when using compression bits
    A message posted at WOODWEB's CNC Forum (10/20/21) -- What is your chip load? If unsure, post your feed, speed and number of flutes on your tool. ...

    Re: Table saw incident
    A message posted at WOODWEB's Cabinetmaking Forum (10/20) -- He states plainly in the video that he removed the stock riving knife/anti kickback, dus ...

    Re: Table saw incident
    A message posted at WOODWEB's Cabinetmaking Forum (10/20) -- Derrek, Thanks for posting both videos, that is actually a sweet setup that the sawstop ...

    Re: Table saw incident
    A message posted at WOODWEB's Cabinetmaking Forum (10/20) -- On the subject of push sticks, don't let them get too thin as they can slip off the mate ...

    Re: Tax Reform Logic
    A message posted at WOODWEB's Business and Management Forum (10/20) -- Very few of the posters on this forum would not have been able to take full ad ...

    Re: Changes in the Way We Bid Jobs
    A message posted at WOODWEB's Business and Management Forum (10/20) -- The ability to empathize is a powerful negotiation tool. Empathy doesn't mean ...

    Re: Lean experts please advise
    A message posted at WOODWEB's Business and Management Forum (10/20) -- Thank you all for chiming in. @ Pat - I am not sure exactly what "bugs&qu ...

    Re: Sauna wall panels
    A message posted at WOODWEB's Architectural Woodworking Forum (10/20) -- Most common epoxy adhesives, once cured, can withstand 250 F to 300 F before ...

    Re: Festool is overrated
    A message posted at WOODWEB's Cabinetmaking Forum (10/20) -- Im always dubious of any post on any forum, where any line of tools is completely either ...

    Re: CNC router life
    A message posted at WOODWEB's CNC Forum (10/20) -- David, I am not sure how to answer that. Just experience. The code is still the same, 25 years aft ...

    Re: Should I invest in a cabinet company?
    A message posted at WOODWEB's Business and Management Forum (10/20) -- First and foremost I would like to thank all for you for taking the time to re ...

    Re: Routing Brass Plate
    A message posted at WOODWEB's CNC Forum (10/20) -- OK. Seem to be having some success. Just to help the next guy I used 15,000 RPM with a ramp in at ...

    Re: Festool is overrated
    A message posted at WOODWEB's Cabinetmaking Forum (10/20) -- Nick Great post, made me laugh after a hard day. Thanks ...

    Re: Slab sawing
    A message posted at WOODWEB's Sawing and Drying Forum (10/20) -- I might suggest that you build a "cradle" for your slabs and out boards us ...

    Re: Double Drilling in HOPS (Holzher)
    A message posted at WOODWEB's CNC Forum (10/20) -- cabinetmaker, Yes! He and I spent almost all day on this! I even changed the post to German becaus ...

    Re: oak or ash veneer on 1" steel rod or tubing
    A message posted at WOODWEB's Adhesives Forum (10/20) -- Treat the steel posts with a phosphate treatment first. This will give a surface finish that ...

    Re: 2023 CR Onsrud Router Defective Phenolic Table
    A message posted at WOODWEB's CNC Forum (9/20/24) -- Eli, thank you for your comment. I’m on the road right now but if my memory serves me I think th ...

    Re: Refinishing
    A message posted at WOODWEB's Finishing Forum (9/20/22) -- Hello J This is the kind of work.i do Not full time but keeps me busy I'm going to give it ...

    Re: Thinking of going waterborne
    A message posted at WOODWEB's Finishing Forum (9/20) -- Thanks Leo Yes I know it smells too I have used waterborne before and the smell is not as har ...

    Re: Murphy bed
    A message posted at WOODWEB's Cabinetmaking Forum (9/20) -- A Murphy bed was something I had wanted to do for a long time and last year, we got a cha ...

    Re: You're welcome
    A message posted at WOODWEB's Business and Management Forum (9/20) -- We are in essentially the Seattle and it's retirement community market. I'm tha ...

    sanding paint to look distressed
    A message posted at WOODWEB's Finishing Forum (9/20) -- we are looking at a supermax sander to make brick that is made out of polyurethane look distr ...

    Re: Install over carpet?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/20) -- Please excuse my oversight... If I had searched the forum before post ...

    Re: Houzz
    A message posted at WOODWEB's Business and Management Forum (9/20) -- Now that you have an extra $3K per year... :-) If you want to take some photos ...

    Re: Festoon LS 130 Linear Sander
    A message posted at WOODWEB's Architectural Woodworking Forum (9/20) -- My apologies for not answering when you posted this a week ago. While no ment ...

    Ideas on building desk
    A message posted at WOODWEB's Cabinetmaking Forum (9/20) -- HI guys I have a customer that want me to build this desk that I designed for them. The d ...

    Re: CNT Motion Series 1000 CNC Router
    A message posted at WOODWEB's CNC Forum (9/20) -- Joe T Did you ever solve your problem with X getting lost on your CNT router? I have a older Didita ...

    Re: stripping old paint & saving finish
    A message posted at WOODWEB's Finishing Forum (9/20) -- Just a thought by the outside chance it hasn't already occured o you...asking a fine art/muse ...

    Re: CNC equipment advise
    A message posted at WOODWEB's CNC Forum (9/20) -- No, he is running his businesses in Cartersville GA, US Routertools.com and the Black box vacuum ev ...

    Re: Professionalism
    A message posted at WOODWEB's Furniture Making Forum (9/20) -- I am going to agree with D brown here. I too went apprenticeship in the 80's and for t ...

    Re: Professionalism
    A message posted at WOODWEB's Furniture Making Forum (9/20) -- wow! is someone full of them self? at some point in time everyone on here was needing ...

    Re: Veneered exterior entry door
    A message posted at WOODWEB's Architectural Woodworking Forum (8/20/24) -- This post is in regards to TB3 and my experience. I have done repairs on m ...

    Re: Oak/MDF veneer panel Mold appears in finishing
    A message posted at WOODWEB's Finishing Forum (8/20) -- Cub: It is interesting that in the bottom photo the staining is heavier on the left side of t ...

    Re: Epic Corian Failure
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/20) -- Thank you for the response. I like the floating and independent slab ide ...

    Biesse 336 Rover 1997
    A message posted at WOODWEB's CNC Forum (8/20) -- I am hoping to find anyone that has, or has access to an idle 1997 Biesse 336 Rover with an XNC con ...

    Re: removing grease and glaze from kitchen doors?
    A message posted at WOODWEB's Finishing Forum (8/20) -- TSP and then lightly scuff sanding You can try a pre-cat lacquer but try it on a small area f ...

    Re: white oak logs
    A message posted at WOODWEB's Forestry Forum (7/20/25) -- Too funny that I just saw your post and kind of crazy that it is from last November. I'll r ...

    WARNING: Do not buy AccTek
    A message posted at WOODWEB's CNC Forum (7/20/23) -- To anyone looking at buying a machine from AccTek, please read this carefully. I've been working ...

    Re: WARNING: Do not buy AccTek
    A message posted at WOODWEB's CNC Forum (7/20/23) -- I've purchased CNC machines from China before. They make fantastic machines, just not this parti ...

    Re: Low hanging fruit
    A message posted at WOODWEB's Business and Management Forum (7/20) -- Alan I was referring to the GM business model verses the Toyota business model. ...

    Busellato G-Code Manual
    A message posted at WOODWEB's CNC Forum (7/20) -- I am nearly finished with the making of a post processor for the Busellato CNC router within Cabine ...

    Re: Everlast polyurethane from Hood
    A message posted at WOODWEB's Finishing Forum (7/20) -- ditto,oil based poly not way to go, precat lac or post cat lac, its a sideboard you dont need ...

    Re: Expensive wooden speaker has ding to lacquer - how to repair?
    A message posted at WOODWEB's Finishing Forum (7/20) -- Unfortunately I am nowhere near dallas. I am in boise. There are other ways to fix that as we ...

    Milling MDF
    A message posted at WOODWEB's CNC Forum (7/20) -- I am currently working on a project that requires lots of milling on the face of a sheet of 5x10 MD ...

    Re: Magnifying glasses headband
    A message posted at WOODWEB's Veneer Forum (7/20) -- Jeweler's supply houses will have better quality. Also dentist supply. Our tool grinder had a se ...

    Re: Expensive wooden speaker has ding to lacquer - how to repair?
    A message posted at WOODWEB's Finishing Forum (7/20) -- Sean hello I am glad to see your post. Jim and Paul were quick to point out that practicing o ...

    Re: Bed design help
    A message posted at WOODWEB's Furniture Making Forum (7/20) -- I will be posting in the near future with some progress pics. Here the final version ...

    Re: Chemlife 24 problems
    A message posted at WOODWEB's Finishing Forum (6/20/25) -- Hey just here cause idk how to post a forum.. Is Chemlife 24 tinted base better for deep d ...

    Re: 1435 SE Holzher edge bander
    A message posted at WOODWEB's Cabinetmaking Forum (6/20/24) -- Just experienced this. There is a pin that has a cotter pin through it that rides in a ...

    Solid surface tops.
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/20) -- I have never worked with solid surface countertops before, I am building ...

    Mozaik Nesting Capability
    A message posted at WOODWEB's CAD Forum (6/20) -- Hi guys, is anyone using Mozaik for CNC at the moment? How do you find the nesting capability to be ...

    Re: Phones, Bathroom,.... Again I know..
    A message posted at WOODWEB's Business and Management Forum (6/20) -- I think it would be much easier to tackle the problem before it becomes an issu ...

    Re: Phones, Bathroom,.... Again I know..
    A message posted at WOODWEB's Business and Management Forum (6/20) -- The ages of people working in my shop, including me. 39 44 50 62 I'm stupid luc ...

    Re: Phones, Bathroom,.... Again I know..
    A message posted at WOODWEB's Business and Management Forum (6/20) -- @Kevin - NO idea how your website URL is listed on my post, as I didn't type it ...

    Re: CNC Router Suggestions
    A message posted at WOODWEB's CNC Forum (6/20) -- I use a Camaster 508 Cobra ATC, this machine has been in use since 2012 with no breakdowns, Natural ...

    Re: timbore verses boracare
    A message posted at WOODWEB's Sawing and Drying Forum (6/20) -- Thanks all for the response. Mr Smith The treatment is for powder post beetles (or so ...

    Re: VBA Alphacam
    A message posted at WOODWEB's CAD Forum (6/20) -- Thank you David for the ideas, will try a few of them and see how they go. It makes sense that the ...

    Re: Mixing dye in 2k poly?
    A message posted at WOODWEB's Finishing Forum (6/20) -- Hey Mike, great question. One thing to remember is that toners are originally intended to be ...

    Re: Radius fishtank cabinetry
    A message posted at WOODWEB's Cabinetmaking Forum (6/20) -- If you know: a) that the arc is a constant curve (i.e., circular and not elliptical); b) ...

    Re: wheelchair motor wiring for auto feed
    A message posted at WOODWEB's Sawing and Drying Forum (6/20) -- Thanks Rod for input and in my previous post it was you I was referring to .Dont know ...

    Re: EnduroVar Alternatives?
    A message posted at WOODWEB's Finishing Forum (6/20) -- Thanks for posting your results; they are similar to mine although I never tried WD-40. Give ...

    Re: Glider black metal arms
    A message posted at WOODWEB's Finishing Forum (6/20) -- And you've decided to post this in the finishing area..... ...

    Re: Singcore panels
    A message posted at WOODWEB's Architectural Woodworking Forum (6/20) -- Gary this is the post I meant to comment on Woodweb sent me an email saying t ...

    Planer blade life
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20) -- I have read in numerous posts about how heat is the enemy of planer knives, as wel ...

    Re: Auction sites
    A message posted at WOODWEB's Cabinetmaking Forum (5/20/24) -- I have in Canada and each time went okay. What I like about them is all past auctions ...

    Re: Auction sites
    A message posted at WOODWEB's Cabinetmaking Forum (5/20/24) -- Dont get the edit feature here I edit and it removes half my post Ive dealt with them ...

    Re: Auction sites
    A message posted at WOODWEB's Cabinetmaking Forum (5/20/24) -- My post made no sense... Has anyone purchased equipment thru MachineryMax auctions? Po ...

    Re: Exterior use of Sapele
    A message posted at WOODWEB's Architectural Woodworking Forum (5/20/22) -- The forum rules set the tone for helping people without a professional sho ...

    Re: Need advice on bits
    A message posted at WOODWEB's CNC Forum (5/20) -- Ok that actually is a good idea. Higher end of chip load and lower rpms. I will try it out this wee ...

    Re: Dovetail Machines....
    A message posted at WOODWEB's Solid Wood Machining Forum (5/20) -- I never cared for prefinishing - you either leave the end grain of the front/back ...

    Re: If you were an employee again, what would you ask at an interview?
    A message posted at WOODWEB's Business and Management Forum (5/20) -- Ummmm??? If you're in an interview that takes two hours, that should be your fi ...

    Re: Adding a switch to an older sliding table saw
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/20) -- Post a pic but when I was looking for a slider the Holzher's look ...

    Re: If you were an employee again, what would you ask at an interview?
    A message posted at WOODWEB's Business and Management Forum (5/20) -- Mel...I do apologize for referencing ya as Male instead of Female. Did notice y ...

    Re: Adding a switch to an older sliding table saw
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/20) -- Sure looks like an Altendorf. You don't need the 3 phase remote. ...

    Re: keaser compessor need your advise to buy
    A message posted at WOODWEB's Cabinetmaking Forum (5/20) -- you need to post more info for anyone to help you. Do you use enough air to warrant a scr ...

    Re: finish outsourcing shop
    A message posted at WOODWEB's Finishing Forum (5/20) -- Jake - you are welcome to post a "Seeking Services" listing at WOODWEB's Job Exchan ...

    Re: Gorilla glue, just curious
    A message posted at WOODWEB's Adhesives Forum (5/20) -- David, I have to confess I did not go to Marco's website when I responded to this issue. Some ...

    Re: Acad 2025 angle confusion
    A message posted at WOODWEB's CAD Forum (4/20/25) -- I have not used AutoCAD 2025, but it should be the same where a negative number goes countercloc ...

    Re: The 'One' Program
    A message posted at WOODWEB's CAD Forum (4/20/25) -- I don't have it because it does not support rotary axis programming, but you might look into Aut ...

    Re: insert tooling
    A message posted at WOODWEB's Cabinetmaking Forum (4/20/24) -- Scott, your post was not offensive in the least. We use old equipment as well as some ...

    Re: Business Opportunity
    A message posted at WOODWEB's Business and Management Forum (4/20/23) -- So, you understand the easy stuff. Great. Do you know how to sell? When to a ...

    Re: Techno LC 4896
    A message posted at WOODWEB's CNC Forum (4/20/23) -- It's a pain in the butt but in a similar situation I just kept trying different posts from other ...

    Re: Vinyl Primer taking to long to dry
    A message posted at WOODWEB's Finishing Forum (4/20/22) -- I have used chemcraft for 4 years now, I have Never used a vinyl primer they have specific ...

    Re: Mitre folding with a saw
    A message posted at WOODWEB's CNC Forum (4/20) -- Hmmm.... I had trouble posting a video, once it got uploaded I see there is a flag about getting th ...

    Re: Mitre folding with a saw
    A message posted at WOODWEB's CNC Forum (4/20) -- Mike, Are you running your saw on an aggregate? I hope the video gets posted so I can see it. Mark ...

    Re: Software
    A message posted at WOODWEB's Business and Management Forum (4/20) -- Look on the cad forum 2nd post down titled CAD/CAM Upgrade ...

    Re: Post over Pre
    A message posted at WOODWEB's Finishing Forum (4/20) -- I'd recommend you finish the back of a door, wait a few days, and then do a cross-hatch adhes ...

    Re: Post over Pre
    A message posted at WOODWEB's Finishing Forum (4/20) -- Your process sounds fine by me. I would not bother with the Vinyl Sealer. Clawlock will bond ...

    Re: Pricing prefinished trim
    A message posted at WOODWEB's Finishing Forum (4/20) -- Denny, thank you so much for the post. That really helped to clarify how to think about it fo ...

    Re: Hinge replacements
    A message posted at WOODWEB's Cabinetmaking Forum (4/20) -- Can you post a pic. ...

    Re: enclosures for photography dark room
    A message posted at WOODWEB's Architectural Woodworking Forum (4/20) -- Thanks Alan, that's kinda what I was thinking but with solid wood. I just rea ...

    Re: saw top lube
    A message posted at WOODWEB's Cabinetmaking Forum (3/20) -- Several online woodworking posts recommend DuPont Teflon Non-Stick Dry-Film Lubricant Aer ...

    Re: Biesse Rover321 needs post for Biesseworks
    A message posted at WOODWEB's CNC Forum (3/20) -- althought,,,an udate for that 321 controller may work with iso out in ,,ive upload a sample,,,not s ...

    Re: Omal HBD 1550 - Albatros
    A message posted at WOODWEB's CNC Forum (3/20) -- Yes - I actually finally heard back from Mark just after posting this message. Thank you so much! ...

    Re: Wood Supply\Selection
    A message posted at WOODWEB's Cabinetmaking Forum (3/20) -- Paul, I like making doors. Attached is a photo of the last kitchen I built and finished i ...

    Re: Tall oversized raised panels
    A message posted at WOODWEB's Cabinetmaking Forum (3/20) -- If you haven't worked in an AWI shop you may want to research their requirements for prem ...

    Re: pigmented conversion varnish or tinted pre cat
    A message posted at WOODWEB's Finishing Forum (3/20) -- I've got my own tests going on myself. Had a drawer front that was coated properly with Magna ...

    Re: Is there any cabinetmakers left?
    A message posted at WOODWEB's Business and Management Forum (3/20) -- Yes Pinetree , I agree if your looking for cabinet makers . As the post title r ...

    My dilemma....
    A message posted at WOODWEB's Business and Management Forum (3/20) -- Hi there. Although I am not a business owner I do peruse this part of the site ...

    NEKDA Spring Meeting - April 2&3
    A message posted at WOODWEB's Sawing and Drying Forum (3/20) -- Our New England Kiln Drying Association Spring Meeting is April 2 & 3 in Brattleb ...

    Re: 2nd CNC
    A message posted at WOODWEB's CNC Forum (2/20/25) -- Thanks for the responses. Karl. We are processing sheet goods. We have the square footage for 2 ...

    New facility and beetles
    A message posted at WOODWEB's Sawing and Drying Forum (2/20/23) -- After 16 years in business on family property we have the opportunity to relocate ...

    Re: Curved benches
    A message posted at WOODWEB's Architectural Woodworking Forum (2/20) -- I agree with the posts. If it were me I would make up a hot press form and us ...

    Re: Parametric CAD/CAM for solid wood furniture machining
    A message posted at WOODWEB's CAD Forum (2/20) -- Want parametric because we have a number of solid hardwood furniture pieces that we want to be able ...

    Re: Pneumatic tracking on a wide belt sander.
    A message posted at WOODWEB's Solid Wood Machining Forum (2/20) -- You just have to play with the 3 air adjustment valves. I think one controls how f ...

    Re: DIY kitchen cabinet making advice
    A message posted at WOODWEB's Cabinetmaking Forum (2/20) -- Jeff, My post was not about criticism at all, I was just trying to simply let them know t ...

    Re: Table base
    A message posted at WOODWEB's Architectural Woodworking Forum (2/20) -- That was my thought of the scenario. If you built that base out of poorly joi ...

    Re: Butyl acetate and Magnaklear
    A message posted at WOODWEB's Finishing Forum (2/20) -- I've never worked with a post cat clear top coat. Interesting that it sands up really nice. I ...

    Re: Butyl acetate and Magnaklear
    A message posted at WOODWEB's Finishing Forum (2/20) -- With Krystal being a post cat, what are you using for a sealer? Also how much of a pain or he ...

    Re: alphacam tool offset number
    A message posted at WOODWEB's CNC Forum (2/20) -- Depends on the machine. Some posts require nothing, others need differing data. What kind of machin ...

    Re: What Wood Species is this
    A message posted at WOODWEB's Sawing and Drying Forum (2/20) -- Thanks guys, I'll post a better cut and focused close-up of the end grain tonight. ...

    Re: Wire Brush Finish
    A message posted at WOODWEB's Architectural Woodworking Forum (2/20) -- Andy, Like I said in my first post, I have about 1,200 linear feet of flat sa ...

    Re: Pay employee per piece
    A message posted at WOODWEB's Cabinetmaking Forum (2/20) -- Puzzleman, I currently do not pay by the piece. I currently have only two employees, as w ...

    RED new message notifier
    A message posted at WOODWEB's Cabinetmaking Forum (2/20) -- The red message telling me how many unread messages I have in any individual thread has r ...

    Re: p-lam on drawer fronts
    A message posted at WOODWEB's Cabinetmaking Forum (2/20) -- The specs should tell you grade Economy, custom And I doubt premium. can you post the spe ...

    Re: cnc cabinet questions
    A message posted at WOODWEB's Business and Management Forum (2/20) -- I bought our machine a little over a year ago, an excellent investment. Here is ...

    Re: problems of tape marks on veneer.
    A message posted at WOODWEB's Veneer Forum (2/20) -- Deepak, If it is the sun it would be lighter and not darker under the tape. How are you removing ...

    Accu system/ Pillar Cabinet Vision post
    A message posted at WOODWEB's CAD Forum (1/20/22) -- Is anyone out there running an older 2005ish Accu Sytem/Pillar dowel machine with a barcode read ...

    Re: security door
    A message posted at WOODWEB's Architectural Woodworking Forum (1/20) -- I am ok going with a wood security door too if one's available with my requir ...

    Re: Any Info on Using an Altendorf Duplex Miter Gauge?
    A message posted at WOODWEB's Cabinetmaking Forum (1/20) -- Can you post the link for the manual you found online? It 's interesting to learn about t ...

    Re: New Shop! Setting up the dust collector
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/20) -- One more question... should have included it in the original post ...

    Re: Software question
    A message posted at WOODWEB's CAD Forum (1/20) -- I wasn't suggesting he have anything to do with a "post" processor. I was saying he shoul ...

    Re: Helpful tips to speed up Production
    A message posted at WOODWEB's Finishing Forum (1/20) -- Jason, Your heart is in the right place but your mind hasn't caught up yet. We simply do not ...

    Re: Helpful tips to speed up Production
    A message posted at WOODWEB's Finishing Forum (1/20) -- sooo...answer Paul's questions right down the line in a post and l bet a host of helpful expe ...

    Re: 4'x12' walnut table top options
    A message posted at WOODWEB's Furniture Making Forum (1/20) -- So, I did mean breadboard ends in my above post not beadboard, my bad. On the straight ...

    Re: Edge Quality on Plywood
    A message posted at WOODWEB's CNC Forum (1/20) -- That's pretty bad. We have the same router. We use an Onsrud 3/8" Compression bit with maratho ...

    Re-veneering speakers - Philadelphia
    A message posted at WOODWEB's Veneer Forum (1/20) -- I have expensive speakers that were damaged in transit to me. They have a walnut veneer over bir ...

    Re: Looking for "Inventor" type software
    A message posted at WOODWEB's CAD Forum (1/20) -- Hi Gary, Please keep us posted on this. I've never looked at Fusion 360 before but it seems interes ...

    Cabinet Program Needed
    A message posted at WOODWEB's CAD Forum (1/20) -- I think this post topic wins for "most discussed..." I feel like my needs are a little un ...

    Re: ABCD-Mambo 500/Hicam2- Help
    A message posted at WOODWEB's CNC Forum (12/19/24) -- Thanks Dropout. I do have a programming manual, the issue is that the Tool measure macros refer ...

    Re: compression bits
    A message posted at WOODWEB's CNC Forum (12/19/24) -- Great post Chad, would love to connect on your success, we sell tools online and are a Leitz/Wi ...

    Re: Drag knife Programming
    A message posted at WOODWEB's CNC Forum (12/19/24) -- Woodwop is weird to me. Not easy to manually edit. With the Fanuc, it was easy to make sure the ...

    Re: Looking for a new 5" 5 hole hook and loop air sander
    A message posted at WOODWEB's Finishing Forum (12/19/21) -- Mike, MikeM, and Michael have all been used in your posts about sanders. If you kind of s ...

    Re: advice comparing electric sanders
    A message posted at WOODWEB's Finishing Forum (12/19) -- Well...I did it! Got the 3 x4 surfprep Black Friday weekend sale 15% off and free shipping I ...

    Finish Coverage Rates
    A message posted at WOODWEB's Finishing Forum (12/19) -- Before I really even get into this, I know there are a million favtors that could go into th ...

    would you warranty this entrance door?
    A message posted at WOODWEB's Architectural Woodworking Forum (12/19) -- I build furniture and cabinetry, so entrance doors aren't my typical. I woul ...

    Re: Sawing a dead tree
    A message posted at WOODWEB's Sawing and Drying Forum (12/19) -- If it is hickory, powder post beetles may be a problem. I've had more issues with hi ...

    Re: In reference to wide belt sanding....
    A message posted at WOODWEB's WOODnetWORK Forum (12/19) -- Thank you, Gary. The concept in the original post could save wood working companies around ...

    Re: Red Elm Cabinet Question
    A message posted at WOODWEB's Cabinetmaking Forum (11/19/21) -- Thanks, Gary. Yes, I certainly did not post my question with the intention of getting ...

    Re: Red Elm Cabinet Question
    A message posted at WOODWEB's Cabinetmaking Forum (11/19/21) -- Tom, While the last two responses have nothing to do with your post I thought I would ...

    Re: PPB fungus
    A message posted at WOODWEB's Sawing and Drying Forum (11/19) -- The issue with true powder post beetles is not the tiny hole. It's the long channels ...

    Re: PPB fungus
    A message posted at WOODWEB's Sawing and Drying Forum (11/19) -- Fascinating! To be more specific to my situation, I am building Windsor chairs with ...

    Re: Adding Catalyst to Vinyl Sealer
    A message posted at WOODWEB's Finishing Forum (11/19) -- It says that if you're going to use a post cat then you need to catalysed you vinyl primer/s ...

    Re: finishing wood/resin tables
    A message posted at WOODWEB's Finishing Forum (11/19) -- Rich, I enjoy reading your posts, you are a knowledgeable guy, but you tend to be a cup 1/2 ...

    Re: Mozaik CNC compatible with Weeke BHX055
    A message posted at WOODWEB's CNC Forum (11/19) -- Agree with Stephan, money spent on training is money well spent. I think you get a couple of hours ...

    Re: Alphacam manual part flip with program stop
    A message posted at WOODWEB's CAD Forum (11/19) -- I ended up having to use NC Hops program stop, basic Alphacam program stop will not post to NC Hop ...

    Re: Mozaik CNC compatible with Weeke BHX055
    A message posted at WOODWEB's CNC Forum (11/19) -- Perhaps a silly question, by why add the expense of an additional programming language and post pr ...

    Re: Business growing
    A message posted at WOODWEB's Business and Management Forum (11/19) -- Eddie posted this response this morning and it was inadvertently removed. My a ...

    Re: Business growing
    A message posted at WOODWEB's Business and Management Forum (11/19) -- Pat, The word "demographics" means nothing all by itself. There is, ...

    Re: BiesseWorks lead-in lead-out
    A message posted at WOODWEB's CNC Forum (11/19) -- The defaults are set on the 'milling data' tab in Settings. You can set a tool class or specific t ...

    Re: HOUZZ?
    A message posted at WOODWEB's Business and Management Forum (11/19) -- I have been active on Houzz for 4 years and have only good things to say. You ...

    Re: Determining Vacuum Holddown
    A message posted at WOODWEB's CNC Forum (11/19) -- Companies that machine plastic and aluminum nests encounter this alot. One technique if you have a ...

    Re: Veneering a bullnose
    A message posted at WOODWEB's Veneer Forum (11/19) -- John, I would like to have the veneer on the bullnose match that of the shelf so I'm going to t ...

    Re: Sanding MDF for paint
    A message posted at WOODWEB's Finishing Forum (11/19) -- I spoke with ML Campbell again this morning, and 320g. is the recommendation. See the attach ...

    Re: Homemade Pellets for Pellet Stove
    A message posted at WOODWEB's Value Added Wood Processing Forum (11/19) -- Johnny, I finally found what I was looking for! From one of the other post ...

    Re: Slider saw fence analog/digital redouts and few other things
    A message posted at WOODWEB's Cabinetmaking Forum (10/19) -- we have been using the tiger rip fence on both our sliders for years. Our original one w ...

    Stone countertop cutting
    A message posted at WOODWEB's Cabinetmaking Forum (10/19) -- I had a question about cutting stone countertops, I was wondering if anyone could recomm ...

    Re: Kuper Stitcher
    A message posted at WOODWEB's Veneer Forum (10/19) -- John, Thank you for all your help and insight. I was hoping you would see my post and respond. ...

    Alcohol soluble resins
    A message posted at WOODWEB's Finishing Forum (10/19) -- Hi all, First post here. I finish musical instruments and finish many in a traditional spiri ...

    Re: Mozaik for SCM
    A message posted at WOODWEB's CNC Forum (10/19) -- I believe they cover the xilog machines. Your best bet is to contact mozaik. Give them your machin ...

    Re: Pro or DIY
    A message posted at WOODWEB's Business and Management Forum (10/19) -- I strongly support that only professionals can post on this forum. I can go 40 ...

    Re: Critique this CNC-cut frameless sink base
    A message posted at WOODWEB's Cabinetmaking Forum (10/19) -- Pat, Stop looking at the pretty pictures and read the first post :-) Op said, "Open ...

    Re: What do you use as a topcoat?
    A message posted at WOODWEB's CNC Forum (9/19/22) -- Are you a salesman for watts? Curious why you post a question about finishing in a CNC section. ...

    Re: Outdoor Table Joinery
    A message posted at WOODWEB's Furniture Making Forum (9/19/21) -- I built an outdoor table a couple of years ago with a 12 segment outer ring of abou ...

    Using maple and birch together
    A message posted at WOODWEB's Cabinetmaking Forum (9/19) -- Hey all, Haven’t posted in so long, had to make a new login. Well, here goes. Got a job t ...

    Re: You're welcome
    A message posted at WOODWEB's Business and Management Forum (9/19) -- Charts Shadow Stats posts a 20+% unemployment in the E6 unemployment rates. Wit ...

    Re: You're welcome
    A message posted at WOODWEB's Business and Management Forum (9/19) -- This one didn't post earlier for some reason ...

    Re: How to price out a pantry unit with rollout shelves
    A message posted at WOODWEB's Business and Management Forum (9/19) -- So why not take a shot? You admit in the first post you have no idea how to pri ...

    Re: How do you compete with smaller shops?
    A message posted at WOODWEB's Business and Management Forum (9/19) -- The original poster said his shop was busy on both ends. So whats the real prob ...

    Re: CNC equipment advise
    A message posted at WOODWEB's CNC Forum (9/19) -- You will appreciate looking at them for sure !! this am R Crawford posted this, He is a great examp ...

    Re: Prime, or not to prime?
    A message posted at WOODWEB's Finishing Forum (8/19) -- First of all, I appreciate the comments left in regards to my post. Most helpful. Matt, I lik ...

    Re: In need of a finisher , Fairfield county , Ct
    A message posted at WOODWEB's Cabinetmaking Forum (8/19) -- Dan - don't forget you can post a "seeking services" or "offering employme ...

    Re: Storing Casework and Millwork in Semi Trailers
    A message posted at WOODWEB's Architectural Woodworking Forum (8/19) -- Over the years, I have followed many many comments posted by Gene Wengert reg ...

    Re: BricsCAD
    A message posted at WOODWEB's CAD Forum (7/19/25) -- Your timing is uncanny! I am in my first couple days of use on the free download I am liking it ...

    Re: Adjustable black cabinet legs for eurocabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/19/24) -- Thanks Harold for sharing, You are right, I also have followed this page for years, an ...

    Re: Selling my business
    A message posted at WOODWEB's Business and Management Forum (7/19/24) -- You can sell your business on Woodwe. You can try posting there - link below ...

    Re: Timber frame bandsaw
    A message posted at WOODWEB's Cabinetmaking Forum (7/19/22) -- As in my first post i need a portable bandsaw that can be placed on a beam that is too ...

    Re: Timber frame bandsaw
    A message posted at WOODWEB's Cabinetmaking Forum (7/19/22) -- Keep removing my posts a$$holes. This site is dead anyway...when the only guy respondi ...

    Re: Finish for Outdoor Cedar
    A message posted at WOODWEB's Finishing Forum (7/19) -- Understand what you're going to be dealing with on exterior grade finishes. You have two basi ...

    Re: Fireplace builtin - firewood cubbie
    A message posted at WOODWEB's Cabinetmaking Forum (7/19) -- Have a thin gage stainless steel or copper pan made to fit inside the entire space. Remin ...

    Foreman uses the Buddy System
    A message posted at WOODWEB's Business and Management Forum (7/19) -- I hope this is the right place to post this. I work in a shop where the foreman ...

    Re: Low hanging fruit
    A message posted at WOODWEB's Business and Management Forum (7/19) -- Over the past 24 months our sales have doubled and our profit margins have quad ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/19) -- " i am confident in my assertion that human resources in a millwork shop a ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/19) -- Uhm, Pat, where are you going with this? You don't also own a vineyard in Napa ...

    Re: Here is a video of how my hand sharpened blade cuts
    A message posted at WOODWEB's Sawing and Drying Forum (7/19) -- Well I would never talk down about getting things done on your own,,, my hat is off t ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/19) -- Pat -- You have missed the point. Let me clarify: a) the "war stories" ...

    Re: Expensive wooden speaker has ding to lacquer - how to repair?
    A message posted at WOODWEB's Finishing Forum (7/19) -- Might be able to use a little lacquer thinner and a small brush. Lacquer melts easily with ei ...

    Re: Kitchen and bathroom cabinet/ vanity finishs
    A message posted at WOODWEB's Finishing Forum (7/19) -- Oops I posted the wrong link. How nasty is the CV? I'm going to buy some of each just to try. ...

    Re: Kitchen and bathroom cabinet/ vanity finishs
    A message posted at WOODWEB's Finishing Forum (7/19) -- In bathrooms you want to use a conversion varnish. It's a post catalyzed product. Do you have ...

    Re: Help! Black spots on Cherry
    A message posted at WOODWEB's Finishing Forum (7/19) -- Thanks Thomas, after your post I did a search and several sites confirmed your suggestion - j ...

    Daughter of Vegas or Bust
    A message posted at WOODWEB's Business and Management Forum (7/19) -- Here is a link to the latest couple posts of my trip. Getting pretty close to V ...

    Re: Conversion varnish going sticky
    A message posted at WOODWEB's Finishing Forum (6/19) -- i stopped reading at lenmar. don't use lenmar. they have a couple of interesting primers but ...

    Re: Is this method acceptable?
    A message posted at WOODWEB's Finishing Forum (6/19) -- IF the total film thickness of the finish - all 7 coats - is more than 5 dry mils, then, it's ...

    Re: Material storage ideas
    A message posted at WOODWEB's Cabinetmaking Forum (6/19) -- I got a high cube shipping container delivered 40’ long. Plasma cut a big hole in the sid ...

    Re: CNC worth the investment? What's the best option?
    A message posted at WOODWEB's CNC Forum (6/19) -- Shop Bot has a forum for its owners as well as CAMaster Feel free to Join CAMheads it has a few 10 ...

    automatic edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (6/19) -- Hi. I posted on wrong forum. What is the difference between an automatic and a semi-autom ...

    Old Delta shapers
    A message posted at WOODWEB's Cabinetmaking Forum (6/19) -- Hi all, I have had two delta 43-205 shapers for a number of years that I got for cheap, b ...

    Re: Lacquer
    A message posted at WOODWEB's Finishing Forum (6/19) -- If you are looking for a very nice Lacquer, I have one custom made that works like the formul ...

    Re: tools from the past
    A message posted at WOODWEB's Cabinetmaking Forum (6/19) -- David, your post reminds of folklore here in Peoria. In a turn of the century millwork sh ...

    Re: Scraper Plane
    A message posted at WOODWEB's Furniture Making Forum (6/19) -- The scraper planes LN offers are excellent but will not take the place of a cabinet sc ...

    Need Genesis Evo & Alphacam training
    A message posted at WOODWEB's CAD Forum (6/19) -- I am new to CNC and looking for some Basic training (online screen share) for Genesis Evo and Alpha ...

    Re: Labor Market/Finding Workers
    A message posted at WOODWEB's Business and Management Forum (6/19) -- Hey sorry the shamelessly flood the thread with posts, but also remembered talk ...

    Re: edgebanding trimmer recommendations
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/19) -- Thanks Chris. Before your post I had never heard of this brand. ...

    Re: Who Makes This Cutter?
    A message posted at WOODWEB's Cabinetmaking Forum (5/19/23) -- I have seen that done another way. Two different door companies put a slight radius on ...

    Re: Exterior use of Sapele
    A message posted at WOODWEB's Architectural Woodworking Forum (5/19/22) -- FORUM GUIDELINES: Please review the guidelines below before posting at WOO ...

    Re: pull out trash with blum undermounts
    A message posted at WOODWEB's Cabinetmaking Forum (5/19) -- Run a 3/4" bottom or a 1/2" bottom with a 1/4" skin over top(the holes wil ...

    Re: Portable Mortiser
    A message posted at WOODWEB's Architectural Woodworking Forum (5/19) -- No oiler. This eliminates the problem I have seen with chain mortisers - oil ...

    Re: Pulling the trigger on a AAA rig
    A message posted at WOODWEB's Finishing Forum (5/19) -- I have the CAT rig as well and have no real complaints with it. Only issue I've had in the fo ...

    Re: Edge splicing veneers
    A message posted at WOODWEB's Veneer Forum (5/19) -- I have edge glued veneers using blue tape and pva glue by pulling the joints together with tape ...

    Re: Online Advertising
    A message posted at WOODWEB's Business and Management Forum (5/19) -- From my understanding, Yelp gets pretty high search results, so using them migh ...

    Re: Online Advertising
    A message posted at WOODWEB's Business and Management Forum (5/19) -- Lo and behold, the day after I posted my reply to this thread, I received an em ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (5/19) -- Related to my previous comments about number of teeth in the cut, I found this FRE ...

    Re: beam saw + point to point vs. nested CNC
    A message posted at WOODWEB's CNC Forum (4/19) -- Jerry - Why are you not cutting to size and taking advantage of the time savings of sized parts mov ...

    Re: 5 axis for nesting
    A message posted at WOODWEB's CNC Forum (4/19) -- You listed these goals: "We also have need of some 5 axis capability for cutting odd angles in ...

    Re: Wood boring bees
    A message posted at WOODWEB's Sawing and Drying Forum (4/19) -- Genes post with regards to the bees is spot on. They dont eat the wood, they merely u ...

    Re: owning your own business is always fun
    A message posted at WOODWEB's Business and Management Forum (4/19) -- I have contacted the owners in a few situations. Situations I should have let g ...

    Jet Cabinet Saw on-going Problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/19) -- This is something I've posted about before that is absolutely driving me nuts!!! T ...

    Re: Bandsaw SCM Formula s640p Blade guides question
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19/24) -- Too many posts - but measuring the rate at which you can manually feed represen ...

    Another titebond failure?
    A message posted at WOODWEB's Adhesives Forum (3/19/24) -- I posted years ago about how tb2 isn't moisture resistant as claimed. It wasn't BTW. Now I ...

    Re: Balusters angle cut
    A message posted at WOODWEB's Architectural Woodworking Forum (3/19/23) -- Could you provide a drawing or sketch? The title says angle cut, and the p ...

    Re: NEW CNC Recommendation for Mostly Cabinet Production
    A message posted at WOODWEB's CNC Forum (3/19/22) -- Hello, I am hardly an expert on CNCs after having received my first machine just two weeks ago s ...

    Mohawk Versalac
    A message posted at WOODWEB's Finishing Forum (3/19/22) -- This is a post catalyzed lacquer. I have some left over from another job and need to finis ...

    Re: state of the economy
    A message posted at WOODWEB's Business and Management Forum (3/19) -- There is -without doubt- gamesmanship going on here from the very start of all ...

    Re: digital levels
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/19) -- We use bubble levels when installing our fence posts. ...

    Secondary Software for drawing/nesting cabinet parts
    A message posted at WOODWEB's CNC Forum (3/19) -- We are about to upgrade our CNC to a new machine so now we have a few software decisions to make. O ...

    Re: Salvaging AAA Nozzles
    A message posted at WOODWEB's Finishing Forum (3/19) -- look imho you are making the cleaning of the pump harder than you need to, leave the pump wet ...

    Re: Weeke BP 80
    A message posted at WOODWEB's CNC Forum (3/19) -- might help if you posted the diagnostic messages. i'm rather experienced troubleshooting my homag a ...

    Re: Weeke BP 80
    A message posted at WOODWEB's CNC Forum (3/19) -- Maybe if I posted a pic of the screen - Or you could call me and we could walk thru it? Uses the Wo ...

    finishing between kerf cut slats
    A message posted at WOODWEB's Finishing Forum (3/19) -- I'm making a headboard. The design calls for tiles that will be made from sections of Kerf cu ...

    Re: Horizontal Boring
    A message posted at WOODWEB's Architectural Woodworking Forum (3/19) -- Bob, can you post a photo of how your mirror is set up? Sounds interesting! ...

    Re: Straight line Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- David care to post a link to used equipment on wenigs site? I can't seem to find i ...

    being nice to your customer
    A message posted at WOODWEB's Business and Management Forum (3/19) -- A post in the CNC forum about Stiles Machinery Service got me to thinking about ...

    HELP. Did I price this out correctly?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/19) -- Hi, I've never posted to a forum before, but here goes! I would really apprec ...

    Re: Is there any cabinetmakers left?
    A message posted at WOODWEB's Business and Management Forum (3/19) -- $17 hour is low compared to union cabinet maker for our area. But at union scal ...

    importing PRV files into Schelling CNC Saw Software
    A message posted at WOODWEB's CNC Forum (2/19/24) -- We have recently purchased a secondhand Schelling S45 beamsaw and have had issues with the HPO o ...

    Re: gluing turning blocks for pillar bases
    A message posted at WOODWEB's Architectural Woodworking Forum (2/19/22) -- The Powermatic is bolted to the floor and to the wall posts, and reinforce ...

    Re: Boxed heart posts
    A message posted at WOODWEB's Sawing and Drying Forum (2/19/22) -- This is the core of the message that needs to gotten out to young high school grad ...

    Thick or Thin?
    A message posted at WOODWEB's Architectural Woodworking Forum (2/19) -- A poster in another forum mentioned he had some 5/8" thick panels to edg ...

    Re: MDF face frames
    A message posted at WOODWEB's Cabinetmaking Forum (2/19) -- I’ve used mdf on several jobs for face frames with no problems and or complaints. Ok so I ...

    Re: cnc compression bits
    A message posted at WOODWEB's CNC Forum (2/19) -- In my experience, that is a typical number for prelam sheets. I have found the Vortex bits to be be ...

    Re: Thick or Thin?
    A message posted at WOODWEB's Architectural Woodworking Forum (2/19) -- David, thank you for clarifying that I am not the only one who succumbs to th ...

    Re: DIY kitchen cabinet making advice
    A message posted at WOODWEB's Cabinetmaking Forum (2/19) -- Brian - A lot of good advice posted here for you, I don't really have anything to add to ...

    Re: Reclaimed wood type and value?
    A message posted at WOODWEB's Sawing and Drying Forum (2/19) -- Is it off the house? Cedar and fir are extremely brittle at that age. Removing split ...

    Re: job site generators
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (2/19) -- post script to my original quote: We have been using the Honda portab ...

    Purchasing a new edgebander
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/19) -- We have narrowed our edgebander search down to the Brandt Ambition 1230 ...

    Re: company going backwards
    A message posted at WOODWEB's Business and Management Forum (2/19) -- I think there may be more to the story. Yes, having one software is ideal, no d ...

    Re: bonding 1/4 inch veneers to door core
    A message posted at WOODWEB's Adhesives Forum (2/19) -- I agree with John & David 100%. You may want to consult Gene Wengert on this if you think ...

    Re: Sliding Dovetail in Solid Material
    A message posted at WOODWEB's Furniture Making Forum (2/19) -- Hi Brian, you're right about that article in FW. I've researched their on-line files a ...

    Re: desparately need a resaw solution
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19) -- ML, learned a lot from that video. The author certainly knew his saw. Thanks for p ...

    Re: Turino
    A message posted at WOODWEB's Finishing Forum (1/19/25) -- I ran across this problem also. As the previous poster stated, raw umber in the paint will ...

    security door
    A message posted at WOODWEB's Architectural Woodworking Forum (1/19) -- Folks - I could not find an exact forum to post this too but suspect somebody ...

    Re: Tips of production
    A message posted at WOODWEB's CNC Forum (1/19) -- We would machine both of these in Vcarve easily. 2D toolpaths for the bracketry and unlike James po ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/19) -- Joel - Don't get mad, get smart! I agree that it could have been a bad batch of the glue, or ...

    Re: Blind keyhole fasteners
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/19) -- Use your post title and do a Google search. They came right up, even ...

    Re: Edge Quality on Plywood
    A message posted at WOODWEB's CNC Forum (1/19) -- we started running at a much higher spped to reduce tooling wear. It was such an increase that part ...

    Re: dxf to biesse works for boring
    A message posted at WOODWEB's CAD Forum (1/19) -- AutoCAD is a must in CNC or any drawing type,,,consider getting alphacam with the correct post proc ...

    Re: Roller Blade Guides Affect on Blade Life
    A message posted at WOODWEB's Sawing and Drying Forum (1/19) -- Dr. Wengert: Th guide wheels are flanged with no bottom support for the blade. The bl ...

    Re: Growing black locust in MN
    A message posted at WOODWEB's Sawing and Drying Forum (1/19) -- Can't comment on the viability of locust in MN, but am willing to offer some insights ...

    211 Bmg
    A message posted at WOODWEB's CNC Forum (12/18/24) -- not sure if this is the right place to post this, but I have an issue with a Weeke CNC 211 BMG ...

    PTO thoughts?
    A message posted at WOODWEB's Business and Management Forum (12/18/24) -- I'm probably not going to change how I do things, but just a thought I had ...

    Re: Any good book for intermediate/advanced cnc machining in wood
    A message posted at WOODWEB's CNC Forum (12/18/22) -- I have never seen a book. I started out 30 years ago with very little support. I gained most th ...

    High-quality 3D models for CNC machines
    A message posted at WOODWEB's CNC Forum (12/18/22) -- Hi all I came across some good models for CNC machines from guys from Ukraine. I uploaded sever ...

    Re: Wooden stair treads tight against metal skirt board.
    A message posted at WOODWEB's Architectural Woodworking Forum (12/18/21) -- I'm not the original Adam poster I agree with David. As long as you make ...

    recoar vinyl sealer after many weeks
    A message posted at WOODWEB's Finishing Forum (12/18) -- Hello Long story short I have applied a non catalyzed vinyl sealer(EZ vinyl sealer mohawk) a ...

    Re: Dust Collector Help Needed
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/18) -- IM trying to find it. Theres a company that makes a hopper plenu ...

    Re: Mozaik CNC compatible with Weeke BHX055
    A message posted at WOODWEB's CNC Forum (12/18) -- Mozaik is a very good program. I used cabnetware since 2000 but they finally got bought out and we ...

    Re: stainless steel inlays gone wrong
    A message posted at WOODWEB's Architectural Woodworking Forum (12/18) -- Hmm, not sure: some of your previous problems might be design related, so ju ...

    Re: finish not bonding to itself
    A message posted at WOODWEB's Finishing Forum (11/18/24) -- Thanks yall, this is one place on the internet where I've found truly knowledgeable help. ...

    Re: Accuracy of Shop Drawings?
    A message posted at WOODWEB's CAD Forum (11/18/24) -- Sry for the typos people, as I thought I could edit my comment after logging in, but after a sc ...

    Re: Waterborne on MDF
    A message posted at WOODWEB's Finishing Forum (11/18/24) -- I've actually found a handful of old posts on here about Ranger MDF, despite it being con ...

    Re: Accuracy of Shop Drawings?
    A message posted at WOODWEB's CAD Forum (11/18/24) -- It made no difference. I specifically clicked on the link that said I could edit my post for 15 ...

    Re: SW Gallery Series
    A message posted at WOODWEB's Finishing Forum (11/18/23) -- it does not stand up to lacquer thinner. Also see similar post down a few slots ...

    Re: Grain Filling stained wood
    A message posted at WOODWEB's Finishing Forum (11/18) -- rich c....i love your response. also, to those who are unfamiliar with card scrapers, take t ...

    Re: Mozaik CNC compatible with Weeke BHX055
    A message posted at WOODWEB's CNC Forum (11/18) -- Noel, Yes, our Homag BOF uses Woodwop. We started with the design subscription of Mozaik. We got f ...

    Re: customer profile and info form
    A message posted at WOODWEB's Business and Management Forum (11/18) -- Thanks for the response, there probably is no one answer to any of this but if ...

    Re: Recently someone posted about edge molding
    A message posted at WOODWEB's Cabinetmaking Forum (11/18) -- Thanks Peter They sent me out a sample that was 6" long but it barely flexes. They ...

    Re: Recently someone posted about edge molding
    A message posted at WOODWEB's Cabinetmaking Forum (11/18) -- Pat, I've run it on large radii. Think bow front on a narrow peninsula top at bar height ...

    Re: Water based finish on natural red oak
    A message posted at WOODWEB's Finishing Forum (11/18) -- Everyone's standards are different. Gary please read the plethora of posts on Minwax Helmsma ...

    Painted dining table
    A message posted at WOODWEB's Finishing Forum (11/18) -- has anyone use a WB post cat sealer over a painted surface? ...

    Re: Interior Designer Commision
    A message posted at WOODWEB's Business and Management Forum (11/18) -- It's late and I am not getting the math correct. Someone please chime in. If y ...

    Re: Yearly gross dollar output per employee
    A message posted at WOODWEB's Business and Management Forum (11/18) -- You can get lost measuring data. When you are measuring how much time it takes ...

    thermoform solid surface
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/18) -- I will be buying an oven for an upcoming job with 3" radius edges. ...

    Re: Interior Designer Commision
    A message posted at WOODWEB's Business and Management Forum (11/18) -- So if I'm reading your post correctly….you give her a price which is your pric ...

    File hardware source
    A message posted at WOODWEB's Cabinetmaking Forum (11/18) -- Can someone point me in a direction to find this file drawer hardware- Its mounted on a ...

    Re: Built in design ideas/solutions?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/18) -- I discussed the ideas with the homeowner and we both agreed that a s ...

    Re: Anyone spraying Turino from MLC?
    A message posted at WOODWEB's Finishing Forum (10/18) -- Have you tried using MLC Flow Enhancer 2 with the stealth products or any of the other MLC p ...

    Re: Autocabinets
    A message posted at WOODWEB's CAD Forum (10/18) -- Hi Paolo, I had checked out CabMaster and another company both out of Australia. They both looked ...

    Re: Another software advice question
    A message posted at WOODWEB's CAD Forum (10/18) -- I think I have 60 to 80k in all the seats, training etc and the posts and links. It’s not cheap, b ...

    Re: Another software advice question
    A message posted at WOODWEB's CAD Forum (10/18) -- 35000 is about right. I've spent probably 20k on the software, another 10k on keys/upgrades/servic ...

    Re: Sayerlack crazing over sealcoat
    A message posted at WOODWEB's Finishing Forum (10/18) -- Whoops; one more thing. Can you post up some photos ? ...

    Re: MDF Okay For Curved Table Apron?
    A message posted at WOODWEB's Furniture Making Forum (10/18) -- This is the image that Duster was trying to post - ...

    Re: First cnc (hopefully)
    A message posted at WOODWEB's CNC Forum (10/18) -- Mike,,,spend as much time as possible researching,,,I've worked at shops where purchasing a cnc an ...

    Re: First cnc (hopefully)
    A message posted at WOODWEB's CNC Forum (10/18) -- I have used CNC for the past number of years the big problem I have found A new machine they have ...

    Post-Processor error
    A message posted at WOODWEB's CNC Forum (10/18) -- Hello all, We have recently been getting errors with our Pro-Master S 7023 from Holzher. Whenever ...

    Re: I am new here
    A message posted at WOODWEB's Solid Wood Machining Forum (10/18) -- Be sure to post something after you actually purchase that machine and produce a ...

    Re: CNC router life
    A message posted at WOODWEB's CNC Forum (10/18) -- This is a good post, something I've wondered about too. We have a Weeke Pod and Rail that is 15 ye ...

    Best cad/Cad program suitable for custom-made furnishings
    A message posted at WOODWEB's CAD Forum (9/18) -- Hello.The question has probably been asked here before but is still testing My name is adam and I'm ...

    Re: Furry Mahogany
    A message posted at WOODWEB's Architectural Woodworking Forum (9/18) -- I posted the original question and have a follow up: I used West System Epoxy ...

    Re: Cabnetware Support
    A message posted at WOODWEB's CAD Forum (9/18) -- Cabwarehelp@gmail.com I don't if he's any good or not, but he's posted here before. ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/18/21) -- Prices widely vary throughout the country, but Daves post is close to what is c ...

    Re: Panel mounting hardware
    A message posted at WOODWEB's Architectural Woodworking Forum (8/18) -- Forgot to mention, James McGrew posted a link to another option in a thread a ...

    Re: Epic Corian Failure
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/18) -- Is the top restricted by the posts anwhere? ...

    Re: sliding shaper advice
    A message posted at WOODWEB's Architectural Woodworking Forum (8/18) -- I virtually never post here, and appreciate all the wonderful insight from pe ...

    Loss of a good man Chuck Rankin
    A message posted at WOODWEB's Solid Wood Machining Forum (8/18) -- I recently learned that our industry has lost another great man in the woodworking ...

    Re: ICA Cna stain base pricing
    A message posted at WOODWEB's Finishing Forum (8/18) -- ICA stain 'system' is not cost effective for a small shop. In Southeastern Michigan, it is H. ...

    Employee Side Work
    A message posted at WOODWEB's Business and Management Forum (8/18) -- I have a shop with four employees. All are under the age of 24 and started with ...

    Re: V grooving Solid Surface with radius corner
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/18) -- Any solid surface supplier will have a solid surface fabrication manual ...

    Re: post cat clean up - boogers in top coat
    A message posted at WOODWEB's Finishing Forum (8/18) -- I do small runs using 2k poly through a Kremlin 10-14 with a 2 qt hopper. I favor MEK over Ac ...

    TORX Screw heads in woodwork production
    A message posted at WOODWEB's Cabinetmaking Forum (8/18) -- Does anyone have experience regarding Torx head vs Philips vs Square vs combo drive screw ...

    Re: post cat clean up - boogers in top coat
    A message posted at WOODWEB's Finishing Forum (8/18) -- it will in fact loosen any material than has deposited itself inside your equipment and lines ...

    Re: Photo of Striebig in packing crate anyone?
    A message posted at WOODWEB's Cabinetmaking Forum (8/18) -- This is what I have. Dave, I will be giving you a call for that moving information. I wil ...

    Re: Paul Downs Book
    A message posted at WOODWEB's Business and Management Forum (8/18) -- Ordered the book after hearing about it from this post, came in yesterday and h ...

    Re: sent 6 blades off for resharp
    A message posted at WOODWEB's Sawing and Drying Forum (8/18) -- Good lord... Someone still has to program the machine. Tell it what they want out of ...

    Re: Adjustable black cabinet legs for eurocabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/18/24) -- Hey guys, I posted my idea in the spirit of cooperation, not as a confrontation! I don ...

    Re: Adjustable black cabinet legs for eurocabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/18/24) -- I've been around this site for many years as well. I remember you from when you were p ...

    Re: Adjustable black cabinet legs for eurocabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/18/24) -- That’s funny but you’re right! I used to post almost daily years ago but slacked off. ...

    Finish for Outdoor Cedar
    A message posted at WOODWEB's Finishing Forum (7/18) -- I've been commissioned to carve some cedar posts for an outdoor porch. I need a durable finis ...

    Re: SCM M3 Gang Rip Saw Chain Issue
    A message posted at WOODWEB's Architectural Woodworking Forum (7/18) -- Hello folks, Thank you for your feedback. AM - it sounds like you have worked ...

    Re: Low hanging fruit
    A message posted at WOODWEB's Business and Management Forum (7/18) -- I've followed this post all day, but I'm not sure what subject is... lack of tr ...

    Re: CNC bit Chipping
    A message posted at WOODWEB's CNC Forum (7/18) -- Put in a new tool, and try this. Try cutting a hexagon approximately 10" in diameter, clockwis ...

    Re: Production box miter cutting
    A message posted at WOODWEB's Cabinetmaking Forum (7/18) -- That means the the front end of the overhead arm of the saw was braced by a pair of stout ...

    Re: Production box miter cutting
    A message posted at WOODWEB's Cabinetmaking Forum (7/18) -- "but with a CNC it should work well" No it won't, reread Larry's post. ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/18) -- Hello all, long time lurker first time poster here. Could not keep my fingers o ...

    Follow up to Oak laminated benches
    A message posted at WOODWEB's Architectural Woodworking Forum (6/18/22) -- Hi all. I posted a question looking for advice back in Feb. and I think yo ...

    Re: User friendly kitchen cad program for website.
    A message posted at WOODWEB's Business and Management Forum (6/18/22) -- Just realized my above post was a victim of my spell check. https://www.allm ...

    Re: Government impact on labor force
    A message posted at WOODWEB's Business and Management Forum (6/18) -- One problem with healthcare and health insurance is nobody know or cares how mu ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/18) -- Thanks Jason. I'm a small shop still hoping to get into a machine. Have my eye on a Biesse but wait ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/18) -- Hi Mark, sorry I am using 6.15 (2014). This is the version with many problems. We are weighing up i ...

    Re: Internet marketing, prosumerism and paid bloggers.
    A message posted at WOODWEB's Business and Management Forum (6/18) -- Yea Mel, there are more dumb people shopping, just walk through WalMart sometim ...

    tiny specks in clear coat
    A message posted at WOODWEB's Finishing Forum (6/18) -- I had posted a message some time back about having small black specks in my clear when I spra ...

    Re: WB coatings issues
    A message posted at WOODWEB's Finishing Forum (6/18) -- Dan Refer to post dated 5/27/15 in this forum. ""New spray systeams" They work ...

    Re: OH CRUD!
    A message posted at WOODWEB's Architectural Woodworking Forum (6/18) -- Thank you rt, Larry, Russ and Harold for your responses! Hey Harold - we have ...

    Re: RE: Bandsaw blades breaking
    A message posted at WOODWEB's Sawing and Drying Forum (5/18) -- To the original post.... I just wanted to add that the bandsaw mill is a relatively l ...

    Re: Holzher Unimaster 7226 Twin Cam Software
    A message posted at WOODWEB's CNC Forum (5/18) -- I have twincam and a holzher machine. I modified the post processor for vcarve and have it working ...

    Re: Music in the Shop
    A message posted at WOODWEB's Business and Management Forum (5/18) -- Thanks Tom. Those are some good responses. Hadn't occurred to me to do the sear ...

    Re: Online Advertising
    A message posted at WOODWEB's Business and Management Forum (5/18) -- I've flirted with both Houzz and Yodle. My neighbors run a Merry Maids franchis ...

    upcut saw blade
    A message posted at WOODWEB's Solid Wood Machining Forum (5/18) -- I'm looking for some recommendations on a 14" upcut saw blade for a new to me ...

    Re: Double head board to for Queen size bed
    A message posted at WOODWEB's Furniture Making Forum (5/18) -- You've taken the job with no idea how to do it? Can't take it apart and can't add to t ...

    Oliver 166 CD
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18/24) -- Hi all, this is my 1st post. I recently purchased an Oliver 166 CD jointer and ...

    Re: Linseed Oil
    A message posted at WOODWEB's Finishing Forum (4/18) -- Every time I read a post like this, I shake my head in disbelief that a color sample was not ...

    Re: Scalloped drawer fronts
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18) -- Thanks David. The 55" is the total length of the piece so the drawer fronts w ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/18) -- Mel, I agree that the behavior you described is unacceptable and have no reason ...

    Re: Trailer loading
    A message posted at WOODWEB's Cabinetmaking Forum (4/18) -- i go to their place of business & look at how they take care of it. needs to be clean ...

    Re: Stumped on math.
    A message posted at WOODWEB's Architectural Woodworking Forum (3/18) -- Ok, as pointed out, the placement of the spindles is critical if your stairs ...

    Re: Stainless steel softclose hinges
    A message posted at WOODWEB's Cabinetmaking Forum (3/18) -- Kevin, I remembered reading your post a few days ago and saw this on a distributors count ...

    This can't be a common procedure
    A message posted at WOODWEB's Finishing Forum (3/18) -- I am not a finisher but have worked fairly extensively with waterborne products. The biggest ...

    Re: ONSRUD 145G12 AMC-B
    A message posted at WOODWEB's CNC Forum (3/18) -- Just reading back at your post we have an Onsrud with this controller no problems yet but curious i ...

    Re: Has anyone used Red Grandis lumber?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/18) -- Thank you all for the posts this was very informative and impartial. ...

    Re: Does wood thickness matter?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/18) -- D, interior window treatments played a big part in my thinking prior to my po ...

    Re: Is there any cabinetmakers left?
    A message posted at WOODWEB's Business and Management Forum (3/18) -- When I started in this industry 30+ years ago , I as an American born boy was a ...

    Re: Is there any cabinetmakers left?
    A message posted at WOODWEB's Business and Management Forum (3/18) -- I think Union or non Union this industry is in sad shape for people. We need mo ...

    Re: Is there any cabinetmakers left?
    A message posted at WOODWEB's Business and Management Forum (3/18) -- I think Union or non Union this industry is in sad shape for people. We need mo ...

    Re: Krystal over resistant ?
    A message posted at WOODWEB's Finishing Forum (3/18) -- if we intend to clear over the pigmented, we do so in the sample submittal stage. That way th ...

    Re: Bragging about Vendors
    A message posted at WOODWEB's Business and Management Forum (3/18) -- Excellent point, and post. I agree. When, in the past, we would have issues wit ...

    Re: Steam bending Ipe
    A message posted at WOODWEB's Architectural Woodworking Forum (3/18) -- I thought we were going to be reading a post about some guy trying to steam b ...

    Re: Cracking on 6" walnut post glue-ups
    A message posted at WOODWEB's Adhesives Forum (3/18) -- One of the points I'm heading towards, is that laminating that many boards will lead you to l ...

    New spray room
    A message posted at WOODWEB's Finishing Forum (2/18/23) -- I have been fortunate to be able to expand to a new shop space. Unfortunately, I have to R ...

    Re: using a handheld veneer stitcher
    A message posted at WOODWEB's Veneer Forum (2/18) -- Thanks David. we will keep working at it. Any idea where those videos are? I tried to find them ...

    Re: Curved benches
    A message posted at WOODWEB's Architectural Woodworking Forum (2/18) -- michael, Please post how this job turns out for you. I'll be interested in yo ...

    Re: Union or having your own business?
    A message posted at WOODWEB's Business and Management Forum (2/18) -- Alan that is a great answer, like others said maybe you should try doing some a ...

    Re: Topcoating over an Oil Based Primer
    A message posted at WOODWEB's Finishing Forum (2/18) -- ML Campbell makes a similar product, Waterborne Universal Primer. I suggested this product at ...

    Re: Cost-effective CNC melamine drawer boxes?
    A message posted at WOODWEB's Cabinetmaking Forum (2/18) -- The CNC shop we use is routinely making drawers exactly like this, and I'll find out whet ...

    Re: Table base
    A message posted at WOODWEB's Architectural Woodworking Forum (2/18) -- We don't have any idea how wide the points of the pyramids will be at the wai ...

    Re: Training an employee on CNC -Cad/Cam
    A message posted at WOODWEB's Business and Management Forum (2/18) -- Our cnc operator is expected to do almost exactly what Larry has described. Thi ...

    Re: Drying 5/4 White Oak, TDAL won't equalize
    A message posted at WOODWEB's Sawing and Drying Forum (2/18) -- Thank you for your responses Gene. The red oak is at 100/96, not 110/106 which accord ...

    Re: Looking for SCM Edgebander Tech in Los Angeles
    A message posted at WOODWEB's Cabinetmaking Forum (2/18) -- Mike, Thanks for the tip. However, since I posted I have found a couple of guys that can ...

    Re: Sanding MDF doors
    A message posted at WOODWEB's Cabinetmaking Forum (1/18/23) -- There are about as many methods as there are cabinet shops and it entirely depends on ...

    Re: wood movement
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- You can predict the amount of movement using our Wood Shrinkage Calculator at the lin ...

    Re: Seriously purchasing two stager compressor for spraying
    A message posted at WOODWEB's Finishing Forum (1/18) -- Bruce, the one from Lowes is the one I'm going to buy. I have two questions for you. Which of ...

    Anyone have an Extrema edge sander?
    A message posted at WOODWEB's Cabinetmaking Forum (1/18) -- Back to buying an edge sander (I posted a similar thread about 1 year ago). I'm having a ...

    Re: Remote Alphacam Training
    A message posted at WOODWEB's CNC Forum (1/18) -- Matt,,,I made a bunch of videos for free and I can post them here for you for free,, if u need,,,ju ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/18) -- Joel, I'll mention once again. WoodWeb is a Professional Forum. We don't tolerate people who ...

    Re: selling 3Form
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- James - The material is paid for, that is not an issue. Keith - Good point! I ...

    Re: AutoCAD 3D
    A message posted at WOODWEB's CAD Forum (1/18) -- Mark, That was a very helpful post, thank you, that is the type of information I was looking for. W ...

    Re: selling 3Form
    A message posted at WOODWEB's Architectural Woodworking Forum (1/18) -- It might help to post a link to your listing, or at least give a description ...

    Re: OSHA
    A message posted at WOODWEB's Business and Management Forum (1/18) -- Robert I suspect that statement was made in jest. It is a part of the ongoing h ...

    Re: Looking for "Inventor" type software
    A message posted at WOODWEB's CAD Forum (1/18) -- I just wanted to update this thread if it is of use to anyone. I've been through an exhaustive sear ...

    CNC trade show?
    A message posted at WOODWEB's CNC Forum (1/18) -- Anyone know when the next trade show will be showing off CNC routers and technology? I'm interested ...

    KCD question
    A message posted at WOODWEB's CAD Forum (1/18) -- Most of our work comes to the with drawings already , but somethings we use kcd to draw plans and o ...

    Re: Roller Blade Guides Affect on Blade Life
    A message posted at WOODWEB's Sawing and Drying Forum (1/18) -- Can you post a drawing, as this does not make sense to me as described. ...

    Re: Any tips for using 5x10 press for veneer and P-Lam?
    A message posted at WOODWEB's Veneer Forum (12/17/24) -- Tom that is excellent help! Thank you for that. I am copying your whole post and sharing it ...

    Re: CNC Starter Tooling? What do we need?
    A message posted at WOODWEB's CNC Forum (12/17/24) -- Harry, I've been following this post since the beginning. I don't have anything to add, but I t ...

    Re: Lacquers vs water finishes
    A message posted at WOODWEB's Finishing Forum (12/17/23) -- I've been spraying finishes for close to 50 years...and still do on 5-6 days per week bas ...

    Re: Kremlin dealer
    A message posted at WOODWEB's Finishing Forum (12/17/22) -- daniel, graco did not exactly tell you correct information. here is why, so much depends ...

    Re: Wooden stair treads tight against metal skirt board.
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17/21) -- I'm not the original Adam poster I agree with David. As long as you make ...

    Re: Where to divide work
    A message posted at WOODWEB's Business and Management Forum (12/17) -- Bobby, As son as I translate that from Greek to reality I'll post a response. ...

    Re: Edging High gloss white panels
    A message posted at WOODWEB's Cabinetmaking Forum (12/17) -- Yes, the unfilled clear glue certainly helps. So does pre-milling. We use that on everyt ...

    Re: 2 Ply Laminated Stiles
    A message posted at WOODWEB's Architectural Woodworking Forum (12/17) -- The best practice would include an odd number of plies with faces being the ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- Rick L- My gauges are useless and they make you cringe. Got it. Thanks so much. J ...

    finish not bonding to itself
    A message posted at WOODWEB's Finishing Forum (11/17/24) -- As part of a small trim business my Dad and I run we do our own trim pre finishing. We've ...

    Re: Accuracy of Shop Drawings?
    A message posted at WOODWEB's CAD Forum (11/17/24) -- You are amazing. I should thank you for all the work you put into making this post ...

    Re: CRACKED THICK VENEER REPAIR
    A message posted at WOODWEB's Finishing Forum (11/17/22) -- I'm not a fan of the elastic filler idea. It will bulge out in the summer and look awful. ...

    Re: Custom Cabinetry and remodeling
    A message posted at WOODWEB's Business and Management Forum (11/17/22) -- I'm curious how many of the "I want to start a cabinet shop" post ...

    Re: How Can I Create a wooden external wall On AutoCad
    A message posted at WOODWEB's CAD Forum (11/17) -- Sheldon, Not sure what exactly you're asking. Presumably, you know what you need to draw, and coul ...

    Re: Mozaik CNC compatible with Weeke BHX055
    A message posted at WOODWEB's CNC Forum (11/17) -- We run a Homag BOF211. We subscribed to Mozaik prior to installation. Got somewhat used to it prio ...

    Re: Cabinetshop management question
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Great topic about how to manage a shop. My cabinet component shop has had high ...

    Re: Sketchup to Xilog Maestro
    A message posted at WOODWEB's CNC Forum (11/17) -- In the United States, all the Pratix S machines are sold with a pc connected directly to the machi ...

    Re: Glue line quality
    A message posted at WOODWEB's Business and Management Forum (11/17) -- Results: After 2+ days of cure, the sample was cut square, some molding steel ...

    Re: curved stair handail questions for professionals
    A message posted at WOODWEB's Architectural Woodworking Forum (11/17) -- Wonderful drawings as usual Steve and your finished products as well. I gues ...

    Re: MDF Door options
    A message posted at WOODWEB's CNC Forum (11/17) -- Out of curiosity Scott, what machinery company do you work for? It is very good to hear what you s ...

    Re: My sawdustburner
    A message posted at WOODWEB's Value Added Wood Processing Forum (11/17) -- I've wanted to do the heated water thing for a while. If I would have had ...

    Help with Indian Drafting Company
    A message posted at WOODWEB's CAD Forum (10/17) -- Hi, This is my first post as I was advised to ask this question here in hopes someone can help me ...

    Re: Cancelled Project
    A message posted at WOODWEB's Business and Management Forum (10/17) -- Thanks for all the feedback regarding the post. Here is how I handled it: I ad ...

    Re: Autocabinets
    A message posted at WOODWEB's CAD Forum (10/17) -- Thanks, DJ and Dennis! I have not made my mind up as of yet. Like I've said the top choices are be ...

    Re: Cabinet hinge suggestion
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/17) -- can you post a picture or a drawing or a link to a drawing ? ...

    Re: How Is This Door Made?
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- For some reason this project of yours has been sticking in my head. I'm work ...

    Re: Door Rotisserie
    A message posted at WOODWEB's Finishing Forum (10/17) -- Marco, can you post a picture of the rack you store them on? I've been tooling around with a ...

    Re: MDF Okay For Curved Table Apron?
    A message posted at WOODWEB's Furniture Making Forum (10/17) -- For some reason, the photo will not post... ...

    Re: SCMI S63 planer
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- I always call my electrician in for this kind of problem. Takes him less than 10 ...

    Re: Weinig molders and carbide insert tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- Typical cutter head hook angles on a Weinig moulder are either 12 or 20 degree. T ...

    Re: Weinig molders and carbide insert tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- Whoops--That should read PS. Listen to the people in the below post from a few da ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (10/17) -- I've posted many times about Topsolid. We have Topsolid Design in which we do our layout/shop draw ...

    Engineered door stiles
    A message posted at aw (12/31) -- Not sure where to post but I will be building a couple Mahogany doors soon and was wondering if anyone can give me ...

    Re: How Many Hinges Per Door?
    A message posted at WOODWEB's Cabinetmaking Forum (9/17) -- Dennis, awesome that you posted these charts. Makes sense the real issue is weight since ...

    Re: Signal for Compressor
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/17/24) -- I tried to edit the post to include the fact that the relay al ...

    Re: 5 and 6" air sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/22) -- Mirka Ceros here as well and two Air Vantage electrics. To the post that says they ove ...

    Re: Frameless sinkbase: edgetape or not
    A message posted at WOODWEB's Cabinetmaking Forum (8/17/21) -- I've decided that Bruce H is my mentor and guru for this, after seeing his picture and ...

    Re: spray booth questions
    A message posted at WOODWEB's Finishing Forum (8/17/21) -- Rich, I've got an open face booth with fire suppression in a 1600 sqft shop dedicated to f ...

    Re: Passing of a long time poster on the Woodweb
    A message posted at WOODWEB's Business and Management Forum (8/17/21) -- That was a loss to this community. A great source of experience and informat ...

    Re: KemVar Plus CV not hardening
    A message posted at WOODWEB's Finishing Forum (8/17) -- do this.... do you have any of the uncatalyzed finish left? catalyze that and do a test spray ...

    Re: this just in
    A message posted at WOODWEB's Business and Management Forum (8/17) -- I'm sure you think it is observational, your posts are subjective. Marginal pro ...

    Re: this just in
    A message posted at WOODWEB's Business and Management Forum (8/17) -- Pat, There is no doom & gloom in that post. It's just an observation. My bu ...

    Re: Spiral carbide dovetail bit?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- If you see in my first post, I am looking to get a single flute cutter. Not a stan ...

    Re: Dust evacuation nut
    A message posted at WOODWEB's CNC Forum (8/17) -- I have been thinking about this since I first read the post. We were discussing sweeping up the oth ...

    Re: post cat clean up - boogers in top coat
    A message posted at WOODWEB's Finishing Forum (8/17) -- We take an extra step with our pumps.... we have around twenty+ assorted kremlin pumps with x ...

    Re: post cat clean up - boogers in top coat
    A message posted at WOODWEB's Finishing Forum (8/17) -- shane, thanks for your help. i just ordered a five and look forward to running your method. o ...

    Re: post cat clean up - boogers in top coat
    A message posted at WOODWEB's Finishing Forum (8/17) -- We spray a barrage of coatings.... Architectural millwork.... We spray anything from pre-cat ...

    Re: post cat clean up - boogers in top coat
    A message posted at WOODWEB's Finishing Forum (8/17) -- shane - what are you guys spraying (2k, polyester, what)? where do you get the stuff you reco ...

    Re: Hammer Felder saw
    A message posted at WOODWEB's Furniture Making Forum (8/17) -- We have a k500s and have been running it for 4 years now. It is a good saw and I will ...

    Re: Modern Church Rail installation
    A message posted at WOODWEB's Architectural Woodworking Forum (8/17) -- Will thats a great story and thanks for posting. Its amazing what happens and ...

    Re: Thick, Large Black Walnut Slabs
    A message posted at WOODWEB's Sawing and Drying Forum (8/17) -- I didn't realize you have a DH in your AC....some do and some don't. Lack of mold doe ...

    Re: Adjustable black cabinet legs for eurocabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/17/24) -- Screw on with rectangular base, but if you post a picture on alibaba, many vendors wil ...

    Re: Adjustable black cabinet legs for eurocabinets
    A message posted at WOODWEB's Cabinetmaking Forum (7/17/24) -- Screw on with rectangular base, but if you post a picture on alibaba, many vendors wil ...

    Need Wilsonart thermalfoil
    A message posted at WOODWEB's Cabinetmaking Forum (7/17/23) -- This didn't seem to post the first time. Anyone out there have 20 or more sheets of Wi ...

    Re: Wishy washy software
    A message posted at WOODWEB's CAD Forum (7/17) -- Pat. True Cabinet Vision is best when you are making cabinets. But, you can design and build many o ...

    Re: " Barn Doors"
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- I’ve enjoyed the sliding barn door fad if that is what it is. Good hardware f ...

    Re: Source for quality logs in the Southwest
    A message posted at WOODWEB's Sawing and Drying Forum (7/17) -- You are welcome to post a "wanted to buy" listing at WOODWEB's Lumber Excha ...

    Re: DH kiln drying douglas fir beams and posts
    A message posted at WOODWEB's Sawing and Drying Forum (7/17) -- I hope you studied this out prior to such a large purchase.....Large beams aren't fea ...

    DH kiln drying douglas fir beams and posts
    A message posted at WOODWEB's Sawing and Drying Forum (7/17) -- I am purchasing a Nyle DH 200 kiln. I am interested in kin drying Douglas fir beams a ...

    Re: DH kiln drying douglas fir beams and posts
    A message posted at WOODWEB's Sawing and Drying Forum (7/17) -- To add: If the beams with your dad had been fully AD'd the twist shouldn't have happe ...

    Re: open frameless cabinets
    A message posted at WOODWEB's Architectural Woodworking Forum (7/17) -- Leo, Well a couple of senior cabinet makers. Congratulations on your longevit ...

    Re: sanding with orbital then block sanding
    A message posted at WOODWEB's Finishing Forum (7/17) -- Scott, go farther down to an excellent post dated 2-1 , "sander issues" They cover ...

    Grow the business, sell out or something else?
    A message posted at WOODWEB's Business and Management Forum (6/17/23) -- Hi I have a small furniture/cabinetry/cnc shop. 1 FTE, 1 PTE and me. Both em ...

    Re: Grow the business, sell out or something else?
    A message posted at WOODWEB's Business and Management Forum (6/17/23) -- Rich Thanks for the response. In this situation they have a business selling ...

    Phones, Bathroom,.... Again I know..
    A message posted at WOODWEB's Business and Management Forum (6/17) -- I know this subject has come up before in various incantations and as parts of ...

    Re: swelling in cabinet doors
    A message posted at WOODWEB's Cabinetmaking Forum (6/17) -- Thanks to everyone who responded to my post, very helpful information. I have another que ...

    Re: The "Sharing" economy and custom cabinet shops.
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Kim, I think my post was politically neutral. It neither advocates for governme ...

    Re: Labor Market/Finding Workers
    A message posted at WOODWEB's Business and Management Forum (6/17) -- Jerry, your quandary is a reflection of the economy past. Those who were over q ...

    Re: Conestoga wood finish with AAA
    A message posted at WOODWEB's Finishing Forum (6/17) -- al, I think the reason why they don't recommend thinning is because you might take the finish ...

    Re: Water based finish on ranger board MDF
    A message posted at WOODWEB's Finishing Forum (6/17) -- I have the exactly the same issue with waterborne on Medex. I only use Medex so do not have e ...

    Re: Drying slab locust from a stump
    A message posted at WOODWEB's Sawing and Drying Forum (6/17) -- Joe - if the image with your post is incorrect, please send me the correct image and ...

    Re: Glueing formica to old formica situation
    A message posted at WOODWEB's Cabinetmaking Forum (5/17) -- I get that, I have a solution once I come up with the correct adhesive. I found so far th ...

    Mounting Wall Paneling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/17) -- I have used Z clips and Star anchors for mounting 3/4" thick wal ...

    Re: Double head board to for Queen size bed
    A message posted at WOODWEB's Furniture Making Forum (5/17) -- You are also going to have to extend the length. I did that once by adding a few inche ...

    Double head board to for Queen size bed
    A message posted at WOODWEB's Furniture Making Forum (5/17) -- I have been asked to make a double head board and foot board fit a queen size bed. The ...

    Re: Chipping/splitting on edge of casing, American beech
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Great information on this post,I would agree with the doctor on over dried wood. M ...

    Office help?
    A message posted at WOODWEB's Business and Management Forum (4/17/24) -- Hi guys I might not have worded my last post correctly. So I've been in busi ...

    Re: Woven Wood Doors, Part V Success!
    A message posted at WOODWEB's Architectural Woodworking Forum (4/17) -- Dave I always been impressed at all your comments on the forums over the year ...

    Re: post cat problems
    A message posted at WOODWEB's Finishing Forum (4/17) -- that's not boogers or crap in your finish...... It's air entrapment on a very open pore wood. ...

    Re: post cat problems
    A message posted at WOODWEB's Finishing Forum (4/17) -- Could it be solvent pop? It looks like heavy coats on grainy wood, although retarding 5% shou ...

    Re: post cat problems
    A message posted at WOODWEB's Finishing Forum (4/17) -- Are you using a sealer? It could be solvent pop especially on open pore wood like oak Try it ...

    Re: Door parts cut list
    A message posted at WOODWEB's Cabinetmaking Forum (4/17) -- Nice spreadsheet, thanks for posting that. I have something similar that has evolved over ...

    White lacquer streaking/dry spray problem
    A message posted at WOODWEB's Finishing Forum (4/17) -- I'm using Rudd UltraClassic white semi gloss lacquer 653035 to paint some cabinets and gettin ...

    Re: It's time to chuck cnc in my tool belt.
    A message posted at WOODWEB's CNC Forum (4/17) -- Hi Mel, Firstly, yes you can do this without attending any course. You are already on the right tra ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Ok, I guess I'm going to answer my own question. After a day and a half of trying ...

    Re: Sherwin Williams white conversion varnish
    A message posted at WOODWEB's Finishing Forum (4/17) -- Jim Clark Are you saying you are putting "urethane reducer" in (solvent) CV and pre ...

    Re: Original 3-1/4 HP Plunge Router Flush Bit
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Can you post a picture of your bit? ...

    Re: Microvelum with RouterCim
    A message posted at WOODWEB's CAD Forum (4/17) -- Router-CIM can cut and nest the Microvellum Solids or their 2D drawing. There are many advantages t ...

    Re: Stratos pro post.
    A message posted at WOODWEB's CNC Forum (3/17/25) -- Many CNC routers, including Anderson models, allow for vacuum zones to be controlled through cus ...

    Need a new (or used) shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/23) -- We have been using Weaver shapers for approx. 25 years now. Getting old and sol ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/22) -- 35 year Millwork veteran running everything from Diehl push feeds (square heads ...

    Re: Questions about New Thickness Planer Options
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- As for infeed rollers, I'm surprised they offer solid. Assuming you're in the USA ...

    Re: AlphaCAM price?
    A message posted at WOODWEB's CAD Forum (3/17) -- If you have a Cabinet Vision sales guy that you know, he can give you a price. Also, most machine m ...

    Re: Adjusting wide belt sander bed
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- Critical thought for a 4 post leveling: Locate the four jack points on the top of ...

    Re: Pre cat lacquer rub out
    A message posted at WOODWEB's Finishing Forum (3/17) -- There are some paint stores that carry post catalyzed products. Lenmar, as you are already us ...

    Re: laquer blushing
    A message posted at WOODWEB's Finishing Forum (3/17) -- How do you know what the finish is? Did you apply the original finish? Did you see the origin ...

    Re: I will never complain about the price of plywood
    A message posted at WOODWEB's Business and Management Forum (3/17) -- I think youve got a link posting problem lol ...

    Re: I will never complain about the price of plywood
    A message posted at WOODWEB's Business and Management Forum (3/17) -- I posted wrong link ...

    Re: Pausing in Woodwop, HOPS, and Biesseworks
    A message posted at WOODWEB's CNC Forum (3/17) -- Thank you very much everyone!!! Biesseworks, Woodwop, G-Code, and SB-Code are all taken care of now ...

    Re: Using tooling after a FIRE
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- So in this post you're asking for opinions please keep in mind that's only what I ...

    Re: Accuspray Guns
    A message posted at WOODWEB's Finishing Forum (3/17) -- Hi Robert I have three PPS systems purchased at different times and they are not prejudice... ...

    Blind dado
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- I often see posts where the contributor indicates the he doesn't "think" a blin ...

    Re: Accuspray Guns
    A message posted at WOODWEB's Finishing Forum (3/17) -- Hi Robert Well, computer inept.....can't post a picture. Go Cat's home page, there bottom lef ...

    Re: Clumsy beginnings, clumsy growth spurts.
    A message posted at WOODWEB's Business and Management Forum (3/17) -- If I recall correctly, Paul D has a desk with "Luck favors the prepared&qu ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- Phil, after reading one of your earlier posts regarding typical British shop equip ...

    Re: Cracking on 6" walnut post glue-ups
    A message posted at WOODWEB's Adhesives Forum (3/17) -- Had big time trouble with white oak table pedestal at the beginning of my career. That's when ...

    Re: Cabinetvision screen to machine
    A message posted at WOODWEB's CAD Forum (3/17) -- Cabnetware/Cabnetvision and STM will post flawlessly to a saw and PTP. With the Holzma there are a ...

    Re: Clear over magnamax pimented precat
    A message posted at WOODWEB's Finishing Forum (2/17/23) -- If you want more protection use a post cat to begin with. ...

    Re: duct size vs machine hood size
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/17/22) -- Hello, and thank you for the replies. I should have included f ...

    Re: PVC Edge Tape thickness for Corner Rounding function
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Thanks Harold! I am going to buy an automatic edge banding machine with 8 functions in Ch ...

    Re: Resorcinol for Sapele
    A message posted at WOODWEB's Adhesives Forum (2/17) -- Okay Jeff, what is a reactive polyurethane? I imagine it is the glue that gives you a black h ...

    Re: I was right all along. Woodworking shop owner=%20lack of education+ horri
    A message posted at WOODWEB's Business and Management Forum (2/17) -- Seems like the formula would make more sense, Woodworking shop owner+lack of ed ...

    Complete Beginner Needs Cabinet/Furniture Help
    A message posted at WOODWEB's Cabinetmaking Forum (2/17) -- Hi, First post. I have built a 50' x 25' catamaran from vacuum resin infused epoxy/corece ...

    Re: Bubbles in paint finish
    A message posted at WOODWEB's Finishing Forum (2/17) -- Bob - I posted a few questions that will help define the likely cause of the problem but if y ...

    Re: Krystal CV on a exterior table
    A message posted at WOODWEB's Finishing Forum (2/17) -- KJ, I generally use Matthews 2K acrylic polyurethane for the exterior work I do, but it's not ...

    Re: RE: Tulip Wood
    A message posted at WOODWEB's Forestry Forum (2/17) -- Don't forget eastern red cedar it makes great fence post and no tulip poplar is not known as g ...

    Re: I've Had It With Uni-Bond!
    A message posted at WOODWEB's Veneer Forum (2/17) -- Correction to my earlier post: actual film thickness is less than calculations based on spreader ...

    SmartLister
    A message posted at WOODWEB's CAD Forum (2/17) -- I have been looking though the posts and I keep seeing a program called SmartLister. I have spent a ...

    Re: ML Campbell Turino wrinkling
    A message posted at WOODWEB's Finishing Forum (1/17/23) -- I did, pop the bubbles and it was air or gas. To me it looked like it flash dried and trap ...

    Re: Overhead Costs
    A message posted at WOODWEB's Business and Management Forum (1/17) -- From the top of my head We include depreciation. The reason we include deprecia ...

    moulder chip recirculation
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/17) -- Hello, I am posting this here to inquire as to if any other exper ...

    Re: I must be a total duh!
    A message posted at WOODWEB's CNC Forum (1/17) -- Learning curves are not easy, They are not impossible. I would consider looking for a forum on the ...

    Re: I must be a total duh!
    A message posted at WOODWEB's CNC Forum (1/17) -- Heres my perspective. How bout all of us luddites,techno-savvy's, long and short term-ers, start re ...

    Re: The best kept secret for small to medium size shops
    A message posted at WOODWEB's Business and Management Forum (1/17) -- I hope some of the posters and lurkers on this forum will be there. I'd love to ...

    Re: Seriously purchasing two stager compressor for spraying
    A message posted at WOODWEB's Finishing Forum (1/17) -- Bruce, thanks for posting, very interesting set of you have. Is that the compressor you use t ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/17) -- Really Joel, you get 2 responses saying they have not had a problem like you're describing an ...

    selling 3Form
    A message posted at WOODWEB's Architectural Woodworking Forum (1/17) -- Our customer changed their mind on a 3Form order we just got. 3Form apparentl ...

    Re: refinishing cabinet doors
    A message posted at WOODWEB's Finishing Forum (1/17) -- JSO, Electric power tool has brush's and it is those brush's that create the spark from const ...

    Re: refinishing cabinet doors
    A message posted at WOODWEB's Finishing Forum (1/17) -- Robert, I would agree with you on the quality of the product, I just thought it was a decent ...

    Re: Festool sander and sanding pads
    A message posted at WOODWEB's Cabinetmaking Forum (12/16) -- Mark, Ya I would have to agree with posters in this forum that the cost of making air ad ...

    Post Laminating Finished Ends and bottoms of uppers
    A message posted at WOODWEB's Cabinetmaking Forum (12/16) -- Anybody have some good ideas on how to avoid post-laminating upper bottoms and finished ...

    Re: Sketchup to Xilog Maestro
    A message posted at WOODWEB's CNC Forum (12/16) -- For anyone thinking about purchasing a SCM Router, especially one with a handheld remote. I would ...

    Re: Polishing dark wood
    A message posted at WOODWEB's Finishing Forum (12/16) -- I really like the design of the countertops. It would be good if you post some more pictures ...

    Re: Cabinet vision 45 degree cut
    A message posted at WOODWEB's CAD Forum (12/16) -- Sorry i post same double picture Attached is pictures ...

    Re: Spindle shaper bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- Lesson learned, but unfortunately I'm stuck with what I've got. I picked up an OE ...

    Re: Large French doors
    A message posted at WOODWEB's Architectural Woodworking Forum (12/16) -- Joe I feel pretty good with the domino's. But after I saw Dave's post I thou ...

    Re: Spindle shaper bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- You might be right Larry. I'm not sure how much the lower bearing contributes to ...

    Re: when can we use white oak?
    A message posted at WOODWEB's Sawing and Drying Forum (12/16) -- I should note that the table in my last post was built by Zach Malcolm from Portland ...

    Re: Spindle shaper bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- Let me quote your first post. Jeff is right on. The PM is a low priced Chinese ma ...

    Re: Need advice on mechanical contractors
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/16/22) -- Just walk away from it if you dont have anyone you can recommend ...

    PPB fungus
    A message posted at WOODWEB's Sawing and Drying Forum (11/16) -- A couple days ago, someone mentioned that powder post beetles (I'm using the term lo ...

    Re: Installing & painting moulding
    A message posted at WOODWEB's Finishing Forum (11/16) -- Thanks Shane. I've read a few of your responses to posts and you seem very knowledgeable. Ye ...

    Re: Large glass showcase doors
    A message posted at WOODWEB's Cabinetmaking Forum (11/16) -- Most likely, your local glass shop will order these for you. Cutting and tempering of gl ...

    Furniture making in West Africa
    A message posted at WOODWEB's Furniture Making Forum (11/16) -- Greetings: My charity, Village Hope, is looking for an experienced furniture maker to ...

    Re: Recently someone posted about edge molding
    A message posted at WOODWEB's Cabinetmaking Forum (11/16) -- Has anyone used this material on a radius? ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/16) -- ok. I mad some adjustments and changed out many hoses and cleaned out my return a ...

    pressing laminate
    A message posted at WOODWEB's Adhesives Forum (11/16) -- We are continuously making 1-1/2" thick post laminated countertops....currently we buil ...

    Re: If you were to do it all over again?
    A message posted at WOODWEB's WOODnetWORK Forum (11/16) -- Thank you for sharing. Although part of me feels sad as I see myself doing parts of what y ...

    Re: Troubles with the New Unibond 800 Formula
    A message posted at WOODWEB's Veneer Forum (10/16) -- Hi, Found this thread while looking for a repair solution for de-laminating Unibond 800. I'm ne ...

    Re: New to this
    A message posted at WOODWEB's Finishing Forum (10/16) -- Wow, What a phenomenal thread. We have been spraying WB for about 8 years now. Used MLCampbe ...

    Camworks Woodwop and Homag
    A message posted at WOODWEB's CNC Forum (10/16) -- I've been using Alphacam for the past 4 years running SCM and Homag machines. I Recently made a jo ...

    Re: Dust problem
    A message posted at WOODWEB's Finishing Forum (10/16) -- Hi everybody. First of all thanks a lot for all the responses. On our Graco airless/airassis ...

    Re: Cabinet Doors Website
    A message posted at WOODWEB's Cabinetmaking Forum (9/16/21) -- You might want to scroll down the posting and answer page and read the forum guideline ...

    Re: Long time contributor passed away
    A message posted at WOODWEB's Cabinetmaking Forum (9/16) -- Tim was one of. My best friends. I've known him for 30+ years. He built my 1st kitchen, t ...

    Re: Installing wrought iron spindles
    A message posted at WOODWEB's Architectural Woodworking Forum (9/16) -- I could be wrong but I am under the assumption that the photo is the current ...

    Re: sander dust extractor
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (9/16) -- Just looking at some old posts and I thought I'd revisit this dis ...

    Re: Biesse 336 Rover XNC Setup Discs
    A message posted at WOODWEB's CNC Forum (9/16) -- Jerry, thanks for the input. Will do. I will post tomorrow evening to let you know how things went. ...

    Re: Plum Creek
    A message posted at WOODWEB's CNC Forum (9/16) -- I have the same experience, in fact I posted on it a few months ago. Not sure why this affects your ...

    Re: MLC Agualente + & Surf Prep Pads
    A message posted at WOODWEB's Finishing Forum (9/16) -- Well, I have been really frustrated with the Plus. It is like starting over. I have been usin ...

    Re: CNC with true 360 rotation
    A message posted at WOODWEB's CNC Forum (9/16) -- John I have not heard of Frog. I briefly looked at the web site you posted and it appears to be for ...

    Re: Particle board cuts good enough to edge band?
    A message posted at WOODWEB's CNC Forum (9/16) -- There have been previous posts regarding this issue. Try a different panel manufacturer, the qualit ...

    Re: Doors finally finished
    A message posted at WOODWEB's Architectural Woodworking Forum (9/16) -- Kip, How did you end up making your curved molding for the glass (earlier pos ...

    Re: Wood filler for Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (8/16/23) -- You might want to post the brand and if it's acrylic or solvent based CV. ...

    Re: Project managament software
    A message posted at WOODWEB's Business and Management Forum (8/16/22) -- Oggie -- I forwarded your post to my brother, who builds custom FileMaker ap ...

    Re: Safety with 2k poly waterborne
    A message posted at WOODWEB's Finishing Forum (8/16/22) -- Thanks to you both. About 2 minutes after I posted this the Chemcraft rep and a rep from A ...

    Re: Removing paint fumes from spray booth exhaust
    A message posted at WOODWEB's Finishing Forum (8/16) -- Hi. Thanks for the replies! I might try and put the exhaust up higher but I think I'm kinda h ...

    Re: Alphacam to Woodwop (Homag machines)
    A message posted at WOODWEB's CAD Forum (8/16) -- Thanks Steve, We supposedly have a post written for Woodwop specifically, & I'm only in the beg ...

    CNC Table for Hire?
    A message posted at WOODWEB's CNC Forum (8/16) -- We are looking for a job shop located in Eastern Wisconsin between Green Bay-Milwaukee. We require ...

    Re: post cat clean up - boogers in top coat
    A message posted at WOODWEB's Finishing Forum (8/16) -- I've had that problem and it was little semi-solid chunks passing through my filters. By clea ...

    Gravity gun for cv
    A message posted at WOODWEB's Finishing Forum (7/16/22) -- I spray ml Campbell post cat cv. My main systems are kremlin aaa. Looking for a very good ...

    Source for quality logs in the Southwest
    A message posted at WOODWEB's Sawing and Drying Forum (7/16) -- My son and I have a small business making live edge slab lumber in Corrales New Mexic ...

    Re: Honest Money Answers Please
    A message posted at WOODWEB's Business and Management Forum (7/16) -- You're not what kind of guy? All I called you was gutsy. That pissed you off? I ...

    Re: Low hanging fruit
    A message posted at WOODWEB's Business and Management Forum (7/16) -- What prompted the last post was an examination of my website traffic. I get a l ...

    Re: open frameless cabinets
    A message posted at WOODWEB's Architectural Woodworking Forum (7/16) -- Thanks for your reply. I am sorry my post was not clear. What will the 1/8 or ...

    Re: huge mistake with heavy bar over floating floor.
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/16) -- You had your answer a few posts back before you even had to remove th ...

    Biesse general questions
    A message posted at WOODWEB's CNC Forum (6/16) -- Hey guys, I am considering a Biesse Rover B with a flat table. It is a 2004 machine looks to be in ...

    Re: GF Enduro CV Problems on Oak
    A message posted at WOODWEB's Finishing Forum (6/16) -- I was looking for info on the web about holes in oak. I bought a table and right after I got ...

    Re: NC HOPS C axis posting incorrectly
    A message posted at WOODWEB's CNC Forum (6/16) -- Hello, can you please send me your *.hop file to my email? m.skotak@cadcam-softcz.cz ...

    Re: Just looking for experience and wisdom?
    A message posted at WOODWEB's Cabinetmaking Forum (6/16) -- This is turning into quite a posting. In someway, it's good to hear that others have also ...

    Proposal/estimate example
    A message posted at WOODWEB's Business and Management Forum (6/16) -- Ive only been in business for about a year and a half. Im a one man operation l ...

    Re: Trying to veneer a mini fridge
    A message posted at WOODWEB's Veneer Forum (6/16) -- I'm not a fan of self-adhesives when it comes to veneer, so I don't know a lot about it, but if ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/16) -- We have been having a lot of problems with topsolid wood. I agree with others who have posted that ...

    edgebanding trimmer recommendations
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/16) -- My shop frequently applies two types of edgebanding: i) 3/4-1" wide ...

    Re: Keeping Butcher Block Style Tops FLAT & SMOOTH Over Time??
    A message posted at WOODWEB's Furniture Making Forum (6/16) -- David, My shop normally builds furniture and cabinetry, with some decorative veneer wo ...

    Re: jig needed for concealed hinge with wider edge
    A message posted at WOODWEB's Cabinetmaking Forum (5/16/22) -- I was going to echo Dennis' post.. you'd better drill a mock up first and make sure yo ...

    Re: Glueing formica to old formica situation
    A message posted at WOODWEB's Cabinetmaking Forum (5/16) -- Your last post, with the photo of all the fittings that the HPL has to 'fit over' did it ...

    Re: Glueing formica to old formica situation
    A message posted at WOODWEB's Cabinetmaking Forum (5/16) -- Rough up the Plam well. I usually use poster board for exact templates with some hot glue ...

    What Type Of CNC Machine Drills Multiple Holes?
    A message posted at WOODWEB's CNC Forum (5/16) -- I have 13 of these cedar posts, will probably 4x4, that need ten 3/16" holes drilled up them. ...

    Need advice on bits
    A message posted at WOODWEB's CNC Forum (5/16) -- First I would like to thank anyone with advice and everyone on the forum for the amazing info I've ...

    Re: Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (5/16) -- Brett, I like Holz-Her banders, and have owned a few of them as well as quality glue pot ...

    Re: 8/4 Cherry Top moisture content?
    A message posted at WOODWEB's Sawing and Drying Forum (5/16) -- Gene, Perhaps I am confused, but I am in the southern tier of Western N.Y. & the ...

    Re: Holding deposit for upcoming work
    A message posted at WOODWEB's Business and Management Forum (5/16) -- Jay asks "Do you get to order a car without $? A mortgage? cruise? air tra ...

    Re: Router Bit Supplier Problem
    A message posted at WOODWEB's Cabinetmaking Forum (5/16) -- FWIW I found this posting on the "Talk ShopBot Forum" Good news about the inser ...

    Re: Subbing out baghouse maintenance
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/16) -- I'm sure you could pay someone to do it, they'd be happy to charg ...

    Yet another Minwax adhesion issue
    A message posted at WOODWEB's Finishing Forum (5/16) -- Let me say from the start to ward off the naysayers I don't consider myself a finisher but a ...

    Cyclone rated volome
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/16) -- I don't know how to search for information about how many cubes a ...

    NC HOPS C axis posting incorrectly
    A message posted at WOODWEB's CNC Forum (4/16) -- Hello, I am trying to sort out an issue with a common type of program thst we use, but this one in ...

    Re: post cat problems
    A message posted at WOODWEB's Finishing Forum (4/16) -- Try reducing air to a minimum and keep 6-8 away from what your spraying. You will find with e ...

    Re: post cat problems
    A message posted at WOODWEB's Finishing Forum (4/16) -- I never liked turbine sprayers It does get hot Do you have pictures of those little boogers? ...

    Re: post cat problems
    A message posted at WOODWEB's Finishing Forum (4/16) -- When I reduce air have trouble with atomizing but will try this. Here are the little boogers ...

    Re: How crooked is to too much
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/16) -- Part of the problem is they installed bath tub before I was finished ...

    Re: 1mm White PVC Edgeband
    A message posted at WOODWEB's Cabinetmaking Forum (4/16) -- You might want to post what part of the country you are in, since freight is a significan ...

    Re: It's time to chuck cnc in my tool belt.
    A message posted at WOODWEB's CNC Forum (4/16) -- Mel. Learn "autocad" you can you use in several industries Having the foreman program is ...

    Re: reselling Planit software?
    A message posted at WOODWEB's CAD Forum (4/16) -- This is from the Planit Customer Service Policy Guide. It may have been updated since Vero took ove ...

    Re: switching to solid model
    A message posted at WOODWEB's CAD Forum (4/16) -- Derek, At one time I worked for a shop that did something similar. Their layout/engineering dept. c ...

    rail to newel cap joint
    A message posted at WOODWEB's Architectural Woodworking Forum (4/16) -- I need to take apart a very old railing in order to reinstall it and tighten ...

    Re: Converting a refrigerator
    A message posted at WOODWEB's Furniture Making Forum (3/16) -- Heath: As with your previous post, you might do well to disclose your ultimate purpose ...

    Re: Festool 4/1 price increase
    A message posted at WOODWEB's Business and Management Forum (3/16) -- Jeez David, you're going to wear the calluses off with all that hand wringing. ...

    Re: Festool 4/1 price increase
    A message posted at WOODWEB's Business and Management Forum (3/16) -- A recession like 2008 is most certainly coming as a result of the Covid 19. Thi ...

    Re: Going from HVLP to AAA
    A message posted at WOODWEB's Finishing Forum (3/16) -- i run both an HVLP setup, and a Kremlin AAA. i fire up the Kremlin when i'm doing a big run - ...

    Re: Stealth texture issue
    A message posted at WOODWEB's Finishing Forum (3/16) -- can you post some decent pics of what your describing? it sounds to me like you just need to ...

    Re: Should I consider CNC
    A message posted at WOODWEB's CNC Forum (3/16) -- Thank you for the responses. My "cabinet guy" happens to be my father. For the past coupl ...

    Re: Codifying Processes
    A message posted at WOODWEB's Business and Management Forum (3/16) -- Derek, My guys are actually pretty good at following lists, This is because it ...

    Re: Codifying Processes
    A message posted at WOODWEB's Business and Management Forum (3/16) -- This is turning into some interesting dialog. Jerry. I have seen The Founder. I ...

    Re: CAM software
    A message posted at WOODWEB's CNC Forum (3/16) -- mastercam has nice functions,,but the post ,,if your not on service is an issue for me,,,,i havent ...

    Re: Codifying Processes
    A message posted at WOODWEB's Business and Management Forum (3/16) -- Sometimes your posts just make me tired. ...

    Re: I was right all along. Woodworking shop owner=%20lack of education+ horri
    A message posted at WOODWEB's Business and Management Forum (3/16) -- "Tact is for people that take a hint... " Totally. Funny-- I did esca ...

    Re: Experience with BuilderTREND?
    A message posted at WOODWEB's Business and Management Forum (3/16) -- I am not familiar with BuilderTrend but have participated in many attempts at o ...

    Re: Coping saw teeth direction
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/16) -- I've got roughly the same training and experience as ML and- The teet ...

    2nd CNC
    A message posted at WOODWEB's CNC Forum (2/16/25) -- Hi Our shop is a small scale manufacturing business with some product lines. We do not do cabine ...

    Re: Relief Cuts
    A message posted at WOODWEB's CNC Forum (2/16/24) -- BH Davis, I still don’t understand what happened, how both messages got crisscrossed. Anyways. T ...

    Re: Sanding for stain or paintable products.
    A message posted at WOODWEB's Finishing Forum (2/16/23) -- Those numbers are nothing to sneeze at. Some of the better per man numbers I’ve seen on he ...

    Re: Air-dried lumber- NYC / Tri-state area
    A message posted at WOODWEB's Sawing and Drying Forum (2/16/23) -- You might try posting a free "Want Ad" in the Lumber Exchange - link bel ...

    Hidden structural connector steel to wood
    A message posted at WOODWEB's Furniture Making Forum (2/16/22) -- We are working on a project that will require several hidden right angle connection ...

    Re: Cabinet door panels
    A message posted at WOODWEB's CNC Forum (2/16/22) -- Hello Scott, Firstly I have to ask why you don't want to make these doors as one piece MDF? I kn ...

    Re: Gap when making frame and panel shaker style cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (2/16/22) -- Chris, please post your website love seeing other people's work. Pure garbage MDF and ...

    Re: Medium volume lineal spray finishing
    A message posted at WOODWEB's Finishing Forum (2/16) -- We can't set it in front of our spray booth, there just isn't room. However I do see that the ...

    Re: Topcoating over an Oil Based Primer
    A message posted at WOODWEB's Finishing Forum (2/16) -- No time to experiment otherwise I would have. I posted here instead. ...

    Re: Walnut Veneer Blisters
    A message posted at WOODWEB's Veneer Forum (2/16) -- @Pete Thank you for your comments and suggestions. After my blister experience with this veneer ...

    Re: Level infeed bed on Weinig Powermat 500
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- James FYI - when you say 7.5hp it's really a 10 HP. Germany rates the motor in KW ...

    Re: Any good book for intermediate/advanced cnc machining in wood
    A message posted at WOODWEB's CNC Forum (1/16/23) -- Thanks, there is no specific question in this post. Woodweb is an amazing resource and I use it ...

    Re: supplemental heat for solar kiln to kill bugs
    A message posted at WOODWEB's Sawing and Drying Forum (1/16/22) -- Well, I had posted a photo, but it's never a sure thing on this site, so let's try ...

    Re: supplemental heat for solar kiln to kill bugs
    A message posted at WOODWEB's Sawing and Drying Forum (1/16/22) -- Thanks Rich and John for you input on this. John you mentioned pictures of your ki ...

    Re: Final stages in dh kiln
    A message posted at WOODWEB's Sawing and Drying Forum (1/16) -- Let me add to my perceived understanding on how this works and would look to be strai ...

    Re: Bonus incentive scheme
    A message posted at WOODWEB's Business and Management Forum (1/16) -- I can certainly understand the frustration. Try this book, System Busters, Phil ...

    Re: New to employee management
    A message posted at WOODWEB's Business and Management Forum (1/16) -- I have started down the lean road after reading several posts here on WoodWeb. ...

    Re: heated make up air in a small shop
    A message posted at WOODWEB's Finishing Forum (1/16) -- I was reading your original post and you are not likely to have an explosion if spraying wate ...

    Re: what can i do to speed drying
    A message posted at WOODWEB's Finishing Forum (1/16) -- How many posts have I read that people are spraying finish material with out a make up air un ...

    Re: Fusion Finish
    A message posted at WOODWEB's Finishing Forum (1/16) -- First off, this is the right thead! Second I have no idea what a "fusion" finish is ...

    Re: Turino application thickness
    A message posted at WOODWEB's Finishing Forum (12/15/23) -- Stealth works well and gives that smooth feel. 6 hours and it's a hard dry. Of course it' ...

    Re: Festool sander and sanding pads
    A message posted at WOODWEB's Cabinetmaking Forum (12/15) -- Karl, Sorry I posted before I was finished somehow, what I was saying about the microwav ...

    Exterior wood door construction.
    A message posted at WOODWEB's Architectural Woodworking Forum (12/15) -- I live in Canada, located on the east side of the mountains so there is a hu ...

    Re: Windows
    A message posted at WOODWEB's CAD Forum (12/15) -- Leave the pc on the cnc alone I would recommend upgrading to windows 10 pro on your desktop pc Yes ...

    Re: How are you all handling telemarketers?
    A message posted at WOODWEB's Business and Management Forum (12/15) -- Adam, You are conflating dogma with reality. There really are good reasons for ...

    Re: MDF raised panels on a nested router
    A message posted at WOODWEB's CNC Forum (12/15) -- Thanks for the reply. After I posted that I came to the same conclusion. That would be several cus ...

    Re: alphacam engraving egg shape
    A message posted at WOODWEB's CNC Forum (12/15) -- Not sure how you would engrave something without corners. Your description is pretty vague. Can yo ...

    Re: MDF raised panels on a nested router
    A message posted at WOODWEB's CNC Forum (12/15) -- Not being a door guy, I don't quite get all the terminology. Can you post a profile? ...

    2 Ply Laminated Stiles
    A message posted at WOODWEB's Architectural Woodworking Forum (12/15) -- I have read quite a few posts here about how it's a bad idea to use 2 ply la ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (12/15) -- It's never up, it's always down because thats how you use the planer to thickness ...

    Re: Electric Appliance Lift
    A message posted at WOODWEB's Furniture Making Forum (12/15) -- We'll see what happens Chris, have an email from another company that makes lifts too ...

    Re: Electric Appliance Lift
    A message posted at WOODWEB's Furniture Making Forum (12/15) -- Pretty sure I used a nexus a couple years ago and it would stop lifting up at whateve ...

    Export csv file to CAM software ?
    A message posted at WOODWEB's CAD Forum (12/15) -- i am looking CAM software that imports csv files and builds all the cabinets back in 3D graphic is ...

    polyurethane glue spreaders
    A message posted at WOODWEB's Adhesives Forum (12/15) -- I posted the to the furniture forum, and just realized this was the more appropriate forum f ...

    Re: Water base primers
    A message posted at WOODWEB's Finishing Forum (11/15/24) -- Old thread here I realize. Just trying to get some help on a topic I posted a few days ag ...

    Re: Micro bubble hell
    A message posted at WOODWEB's Finishing Forum (11/15) -- Mark, your lasts couple of posts suggest that the wet film thickness with the EM-9300 was to ...

    Re: post for Omni 1530 cnc
    A message posted at WOODWEB's CNC Forum (11/15) -- Hi, maybe i can help you with this. Working as a .NET programmer and also postprocessor writer con ...

    laquer blushing
    A message posted at WOODWEB's Finishing Forum (11/15) -- I'm a painter with a good finishing background as well, however, using only standard poly fi ...

    Re: Oxalic removed stains returning
    A message posted at WOODWEB's Finishing Forum (11/15) -- As my post said, yes I did see you all sides. Typical sanding process starting with 120 to 1 ...

    Re: Yearly gross dollar output per employee
    A message posted at WOODWEB's Business and Management Forum (11/15) -- I find this topic an endless source of fascination, as it is always a comparis ...

    Re: How Many Hinges Per Door?
    A message posted at WOODWEB's Cabinetmaking Forum (11/15) -- In the #3 answer by Denis Bean he posted a chart to calculate the number of hinges for t ...

    Re: Routing Steel on a router
    A message posted at WOODWEB's CNC Forum (10/15/23) -- I'm sorry for the rants and multiple, multiple, typos. I'm a few years B4 they started testing ...

    Tip size for kremlin
    A message posted at WOODWEB's Finishing Forum (10/15/22) -- I spray mlcampbell post cat cv in kremlin airmix. What tip size are you using. I have alw ...

    Re: Lean Grocery Stores
    A message posted at WOODWEB's Business and Management Forum (10/15) -- Sam Which is why I posted the 3rd chart showing online sales as around 8% You ...

    Re: Custom shaper Knives Protruding Slightly Above Head
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15) -- I had forgotten, that disc is actually 9" and has a cutting depth of ~3.75-4 ...

    Re: Custom shaper Knives Protruding Slightly Above Head
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15) -- Based on your image the projection above the cutter head wouldn't be the issue. T ...

    Benefits Package
    A message posted at WOODWEB's Business and Management Forum (10/15) -- I am in the process of trying to find my second employee, and so far everybody ...

    Any proficient Mozaik users here? I am considering it and have questions
    A message posted at WOODWEB's CAD Forum (10/15) -- So I'm looking at Mozaik (among a couple of other software companies), I don't have a CNC, and wou ...

    Re: curved stair handail questions for proffessionals
    A message posted at WOODWEB's Architectural Woodworking Forum (10/15) -- Jim, Great questions, and interesting responses. I wrote out a longer somewh ...

    Re: Concealed filler strip connector
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/15) -- Patrick, The sample that I have, which has a few joint configuration ...

    Re: Converting lineal ft cost to board foot cost
    A message posted at WOODWEB's WOODnetWORK Forum (10/15) -- For pieces that are narrower than 4", we seldom figure the BF, as it is rather meanin ...

    Re: veneer panel discoloration
    A message posted at WOODWEB's Veneer Forum (10/15) -- You could do two things. Shade in the area that's changed color or redo the entire lobby. Depen ...

    Re: Converting lineal ft cost to board foot cost
    A message posted at WOODWEB's WOODnetWORK Forum (10/15) -- Gene, Thanks for catching my error, I assumed from the question that the poster was trying ...

    Re: Long time contributor passed away
    A message posted at WOODWEB's Cabinetmaking Forum (9/15) -- Also very sorry to hear of this. Energetic posters are what make this forum great. He wil ...

    Re: Buying custom cabinet shop: a good idea?
    A message posted at WOODWEB's Business and Management Forum (9/15) -- 30 days seems extremely short to me but again. You've met the shop and presumab ...

    Re: Treated Toe Kicks (medical)
    A message posted at WOODWEB's Architectural Woodworking Forum (9/15) -- Thanks Alan and All, I am sending an RFC (clarification this AM, this is a fa ...

    Re: HolzHer cnc battery replacement
    A message posted at WOODWEB's CNC Forum (9/15) -- Hopefully he did not take them both out at the same time... If this is your Cmos battery on any CNC ...

    Re: Commercial Case Goods
    A message posted at WOODWEB's Business and Management Forum (9/15) -- Hard to decide if this is trolling, or satire. Working smart outdid working har ...

    Re: How do you compete with smaller shops?
    A message posted at WOODWEB's Business and Management Forum (9/15) -- The Kilgore thing is ridiculous without question, an alltime low there. My take ...

    Re: Blum Mini Press Starts by itself
    A message posted at WOODWEB's Cabinetmaking Forum (9/15) -- I got in touch with Jim at Blum and he suggested I try the Air switch (possibly a stuck s ...

    Re: Spraying Latex with AAA
    A message posted at WOODWEB's Finishing Forum (8/15/25) -- if u r spraying with a fine finish tip, u need to increase the gun handle filter. are u sp ...

    Re: First run at entry/exterior 5 panel, raised panel doors
    A message posted at WOODWEB's Architectural Woodworking Forum (8/15/22) -- I know this is not a good reason to be dowel averse but my personal aversi ...

    Re: Morbidelli N100 & Mozaik
    A message posted at WOODWEB's CNC Forum (8/15/22) -- Have you got a working file that you can open in a text editor next to a Mosaik file? You could ...

    Please help a newbie by recommending the correct router bit
    A message posted at WOODWEB's Architectural Woodworking Forum (8/15) -- Please help a newbie by recommending the correct router bit shape. Here's som ...

    Help with Stealth "streaks"
    A message posted at WOODWEB's Finishing Forum (8/15) -- My finisher has been having an issue with the darker colored white base Stealth post cat from ...

    Re: Matching a Restoration Hardware sample
    A message posted at WOODWEB's Finishing Forum (8/15) -- Thanks for the info. Will look into the water soluble dyes - being in a rural area (island ac ...

    Re: Machinery Exchange
    A message posted at WOODWEB's Business and Management Forum (8/15) -- I have had machines sell within hours of posting here on woodweb. It's the best ...

    post cat clean up - boogers in top coat
    A message posted at WOODWEB's Finishing Forum (8/15) -- i'm mostly self-taught in my finish endeavors so i'm hoping someone will be able to help shar ...

    Re: Shop floor motivation
    A message posted at WOODWEB's Business and Management Forum (8/15) -- Chad, A long time ago I used to outsource doors and drawer boxes. A problem I w ...

    Re: Shop floor motivation
    A message posted at WOODWEB's Business and Management Forum (8/15) -- Coach, If you are the owner of your company like I am, then I have to assume th ...

    Re: Aspire Biesse post processor
    A message posted at WOODWEB's CNC Forum (8/15) -- wow its so old pp?? any way if you need or any else i can create pp direct to bsw(cix format) ...

    Re: Hammer Felder saw
    A message posted at WOODWEB's Furniture Making Forum (8/15) -- rob please resend me that email i sent you and I will post my comments. Wrote it on an ...

    Re: Fluorescent Glue
    A message posted at WOODWEB's Adhesives Forum (8/15) -- The titebond brand works great at any point up to finish, my biggest gripe is finding a brigh ...

    Re: Finish Cracking on Fire Rated MDF
    A message posted at WOODWEB's Veneer Forum (8/15) -- Yes, I have seen some weird stuff with fire rated nauf MDF. Mostly darkening of veneers over tim ...

    Re: Organizing/Labeling Job Materials
    A message posted at WOODWEB's Business and Management Forum (7/15) -- The last line of the post is where you may have to begin, otherwise the system ...

    Re: Honest Money Answers Please
    A message posted at WOODWEB's Business and Management Forum (7/15) -- I have to agree with rich c. on one thing. Actually I agree with all of it. But ...

    Re: hit the skids.
    A message posted at WOODWEB's Sawing and Drying Forum (7/15) -- No reply so far so I thought I would add a few thoughts. While in Duluth, we toured a ...

    Refinish ideas for light oak?
    A message posted at WOODWEB's Finishing Forum (7/15) -- I am looking for advice and ideas, I have some oak columns and a bunch of railings and spindl ...

    Re: redwood wine barrel wood
    A message posted at WOODWEB's Cabinetmaking Forum (7/15) -- Sorry, I misread the original post, He is looking for a supplier of the lumber from old r ...

    Re: Heavy vanity question
    A message posted at WOODWEB's Cabinetmaking Forum (7/15) -- Sorry Joel, Your post wasn't up when I wrote mine. The load is shear as well as pull out. ...

    Re: open frameless cabinets
    A message posted at WOODWEB's Architectural Woodworking Forum (7/15) -- I am talking about how the face looks at the seams not how to fasten them tog ...

    Re: Here is a video of how my hand sharpened blade cuts
    A message posted at WOODWEB's Sawing and Drying Forum (7/15) -- Howdy Rod, Curious... do you use a file or dremmel, or something else? I'm having pro ...

    Re: Moving to Florida
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/15) -- We are completely on the same page. It could sound crafty and manipul ...

    Re: prime walnut yield
    A message posted at WOODWEB's Cabinetmaking Forum (6/15/22) -- RichC doesn't get it. Has nothing to do with humor. Why ask someone how long they've b ...

    Re: how do i get closet jobs
    A message posted at WOODWEB's Business and Management Forum (6/15) -- It's simple. Build a closet. Your closet. A closet for your parents. For a frie ...

    Re: Mixing dye in 2k poly?
    A message posted at WOODWEB's Finishing Forum (6/15) -- Thanks Mike F. Do you find it a lot more scratch resistant then CV? I love the scratch resist ...

    40 inch diameter log in solar kiln
    A message posted at WOODWEB's Sawing and Drying Forum (6/15) -- Does anybody have experience or can comment or has heard of somebody kiln drying larg ...

    Re: Type II pva and Western red cedar
    A message posted at WOODWEB's Adhesives Forum (5/15) -- Also thanks for the heads up I would not have had a clue ,about the glue unless I read the po ...

    Re: Dust/shavings collection for DJ-20 jointer
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/15) -- In response to David Scholar's post about allowing for make up ai ...

    Door Sanding Machines
    A message posted at WOODWEB's Cabinetmaking Forum (5/15) -- Re posting this from the finishing forum. Is anyone having good results from a brush/flad ...

    holzher edgebander issue
    A message posted at WOODWEB's Cabinetmaking Forum (5/15) -- sorry if i posted in the wrong section am new here, i have a holzher 1402 and i bought it ...

    Re: looking for stainless inset hinge solution for outdoor kitchen
    A message posted at WOODWEB's Cabinetmaking Forum (5/15) -- hehe I found the exact same ones and we ordered a few to inspect them to see how they loo ...

    Re: How many spindles are there in a CNC milling machine?
    A message posted at WOODWEB's CNC Forum (5/15) -- ...and???? Not sure what the point of your posting is Norm. I am not trying to be confrontational, ...

    Re: Source for 6mm PCD router bit
    A message posted at WOODWEB's CNC Forum (5/15) -- Mike S I'd say that would get me out of trouble but I don't see it in your catalogue. Can you invoi ...

    Re: Are inline gun filters re-usable?
    A message posted at WOODWEB's Finishing Forum (5/15) -- my mistake i didn't read the post correctly i am assumed it wash the bobcat gun and yes you c ...

    Re: nested base vs beam saw
    A message posted at WOODWEB's CNC Forum (5/15) -- I've got a Komo nested router, an IMA PTP, an 8', 3 drill, bore & insert, a Schelling beam saw. ...

    Re: If you were an employee again, what would you ask at an interview?
    A message posted at WOODWEB's Business and Management Forum (5/15) -- I used to be a chef in a previous life. Now I am transitioning out of 20 years ...

    Re: Microvellum
    A message posted at WOODWEB's CAD Forum (5/15) -- The MV forum will be more helpful than their not so good tech support. The G-code quality varies fr ...

    Techno LC 4896
    A message posted at WOODWEB's CNC Forum (4/15/23) -- My cnc runs on mach 4 i have cabinets parts pro it will not give me g code with the post prosser ...

    Re: Where Have All the Carpenters Gone?
    A message posted at WOODWEB's Business and Management Forum (4/15) -- I will have a hard time ever accepting that pay scale alone in this work is the ...

    Re: Where Have All the Carpenters Gone?
    A message posted at WOODWEB's Business and Management Forum (4/15) -- People have been beating this drum for over a decade, and its partly true. But ...

    Re: hardwood choices
    A message posted at WOODWEB's Cabinetmaking Forum (4/15) -- easy answer KCR their is a woman involved. I think thatis as short of an answer I can giv ...

    Re: Zillow Flipping Homes
    A message posted at WOODWEB's Business and Management Forum (4/15) -- Pat, I think your spell-check is set to metric. I believe what you meant to say ...

    Re: CabinetVision Labels
    A message posted at WOODWEB's CNC Forum (4/15) -- We are buying it Right now we are using sharpie on all the cabinet backs with Client name, Room # a ...

    Re: Humans and profit
    A message posted at WOODWEB's Business and Management Forum (4/15) -- "Eh?"-- I'm still chuckling at your post... Btw--"shotty" w ...

    reselling Planit software?
    A message posted at WOODWEB's CAD Forum (4/15) -- this will sound completely ignorant so apologies right up front but, I'm trying to help a family me ...

    Re: switching to solid model
    A message posted at WOODWEB's CAD Forum (4/15) -- Derek, I'm curious, could you post few examples of the "accurate pretty pictures" you wer ...

    Re: Pew Repairs
    A message posted at WOODWEB's Furniture Making Forum (4/15) -- Sounds like a horrible job to bid. Bid it big, because you will certainly be called ba ...

    Fumigating Recycled barn wood
    A message posted at WOODWEB's Value Added Wood Processing Forum (4/15) -- I was reading an excellent Knowledge based article on Recycled barn wood po ...

    Re: Lost settings for CypCut
    A message posted at WOODWEB's CNC Forum (3/15/24) -- There has been many off topic posts by people who reference that wattson web site. It seems to b ...

    Re: NEW CNC Recommendation for Mostly Cabinet Production
    A message posted at WOODWEB's CNC Forum (3/15/22) -- SS, CNT, Freedom and My Machine Camaster are all in the same category of machines, I do exactly ...

    Re: Long Term Durability of Epoxy/Wood Bonds?
    A message posted at WOODWEB's Adhesives Forum (3/15/22) -- I searched the forum but didn't really find definitive information Tom. I even posted the ...

    Re: Stiles and rails
    A message posted at WOODWEB's Cabinetmaking Forum (3/15/22) -- Yes standard shaker flat panel door, one 1” wide cross rail in the middle. Haven’t eve ...

    state of the economy
    A message posted at WOODWEB's Business and Management Forum (3/15) -- Every year there's discussions on this forum about the state of the economy. Ab ...

    Re: Converting a refrigerator
    A message posted at WOODWEB's Furniture Making Forum (3/15) -- If you drop down one post you see that Heath wanted to turn a bathroom into a refriger ...

    Re: Getting Dark Brown Stain
    A message posted at WOODWEB's Finishing Forum (3/15) -- Hmm. I will try attaching again as well as posting a link. ...

    Construction Question - Kidney Bean Shaped Desk with Curved Legs
    A message posted at WOODWEB's Furniture Making Forum (3/15) -- Hi all, This site and its extensive archive have been very informative so to start I j ...

    Re: Pre cat lacquer rub out
    A message posted at WOODWEB's Finishing Forum (3/15) -- I did check out the Lenmar products. Try using a white basecoat under a post catalyzed pigmen ...

    Re: Pre cat lacquer rub out
    A message posted at WOODWEB's Finishing Forum (3/15) -- Can't respond to a post finishing schedule since I don't know what sheen you are attempting. ...

    Re: Codifying Processes
    A message posted at WOODWEB's Business and Management Forum (3/15) -- I've posted more than once about another article I read in HBR. For those that ...

    Re: Problems with Wilsonart 1730 contact adhesive
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/15) -- A few shops have contacted me directly about 1730 issues, and I've respo ...

    Re: CNC Solutions Dovetail Bit
    A message posted at WOODWEB's CNC Forum (3/15) -- If you cannot locate, post a photo of the bit and or the specs and maybe we can locate it for you. ...

    Re: Adjustable Feet trial
    A message posted at WOODWEB's Cabinetmaking Forum (3/15) -- Jim, Can you post the Model Number you like? ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15) -- Funny story about people and riving knives. And this is why I think that my motly ...

    Re: Cracking on 6" walnut post glue-ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15) -- If the cracks were all along the glue line between laminations, i'd say adhesive i ...

    Re: Spoilboard clean up between cycles
    A message posted at WOODWEB's CNC Forum (3/15) -- Wow Brian heres an idea you run your shop as you see fit and Ill run mine. Dont know if you noticed ...

    Re: Cabinetvision screen to machine
    A message posted at WOODWEB's CAD Forum (3/15) -- We are learning to use CV Ultimate with Screen to Machine daily with our cnc router. We took the ad ...

    Re: Cabinetvision screen to machine
    A message posted at WOODWEB's CAD Forum (3/15) -- We are learning to use CV Ultimate with Screen to Machine daily with our cnc router. We took the ad ...

    Cabinetvision screen to machine
    A message posted at WOODWEB's CAD Forum (3/15) -- I am looking for some advice as to how I want to move forward and become a full screen to machine s ...

    Re: Article on single head wide belt sanders
    A message posted at WOODWEB's WOODnetWORK Forum (3/15) -- I really enjoyed your sanding article, it is good info. I have one question: why is the amo ...

    Re: Cabinet door panels
    A message posted at WOODWEB's CNC Forum (2/15/22) -- MarkB, I always look forward to your posts, I had to laugh that you were so hard on me. Sorry I ...

    CV to selfseal or not to (sealer)
    A message posted at WOODWEB's Finishing Forum (2/15) -- Hello I know I wont get a definitive answer but was looking more of a pros/cons of using CV a ...

    Re: Walnut Veneer Blisters
    A message posted at WOODWEB's Veneer Forum (2/15) -- @Tom Gardiner Thank you very much for your posted comments. Your comment about my use of a press ...

    Re: Looking into using Mozaik, but...
    A message posted at WOODWEB's CAD Forum (2/15) -- Scm is listed on the post processor page, but you should give them your exact machine, controller a ...

    Re: White wash with sherwin williams cv system
    A message posted at WOODWEB's Finishing Forum (2/15) -- Follow up and post some results and photos! ...

    Re: Mozaik software
    A message posted at WOODWEB's CAD Forum (2/15) -- Lots of SCM customers, SCM, Routec, Morbidelli, Busellato ... we have lots of customers using all t ...

    Re: Biesse Rover321 needs post for Biesseworks
    A message posted at WOODWEB's CNC Forum (2/15) -- Will not work on 321 as it is not equipped with the proper plc to run it and the cost to upgrade wo ...

    Re: Help Fixing Mispaced Cabinet Drawer Pull Mounting Holes
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/15) -- My wife suggested trying a different pull since she read others had p ...

    Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/15) -- I thought I would post a recent experience so nobody else suffers unecessarily. I used to use ...

    Re: Looking for hot air edgebander tips
    A message posted at WOODWEB's Cabinetmaking Forum (1/15) -- James, do you remember if one type of banding worked better than another? I seem to remem ...

    Re: upgrade thermwood controller
    A message posted at WOODWEB's CNC Forum (1/15) -- Servo... will look at the actuals tomorrow and post online since I have such a knowledgeable audien ...

    MLC Agualente, Valspar Zenith, General finishes
    A message posted at WOODWEB's Finishing Forum (12/14) -- Saw in a post below that Sherwin williams may be discontinuing the agualente line? any truth ...

    Re: How are you all handling telemarketers?
    A message posted at WOODWEB's Business and Management Forum (12/14) -- I'm not sure that Judge Roy Moore and telemarketers are in the same category. ...

    Re: Can anyone identify this material/finish
    A message posted at WOODWEB's Cabinetmaking Forum (12/14) -- Thanks for this post. I have bid a couple of jobs with renderings like those above. I di ...

    Re: Veneer Failure
    A message posted at WOODWEB's Veneer Forum (12/14) -- I agree that the veneer manufacturers should pay for the refinishing, but I am not sure if this ...

    Re: Separation coat between oil stains
    A message posted at WOODWEB's Finishing Forum (11/14/24) -- I'll post some photos from the finished project. It's only an old cutlery canteen but it ...

    Re: KOMO VR-5 12-MACH 1 CNC Router
    A message posted at WOODWEB's CNC Forum (11/14/24) -- To get the most accurate SRAM you should post a picture of the serial number plate and tell us ...

    Re: Custom Cabinetry and remodeling
    A message posted at WOODWEB's Business and Management Forum (11/14/22) -- Rich has hit another important point in doing residential work in that a lo ...

    Re: Automated spray system
    A message posted at WOODWEB's Finishing Forum (11/14/21) -- Rich Cabinet doors and face frames mostly. I use prefinished plywood for boxes. And I don ...

    Re: Creating a Job or creating a Business
    A message posted at WOODWEB's Business and Management Forum (11/14) -- Better advise would be demonstrating how to monetize your skills not diminish ...

    Re: Giben/Anderson GS series
    A message posted at WOODWEB's CNC Forum (11/14) -- Bob, Feel free to contact me directly if you would like to. I'm a technician that works on every b ...

    Re: Craftsman finish on 1/4 sawn white oak
    A message posted at WOODWEB's Finishing Forum (11/14) -- Nick, Now & then I need help with a finishing job and usually find that I didn't price i ...

    Re: Craftsman finish on 1/4 sawn white oak
    A message posted at WOODWEB's Finishing Forum (11/14) -- if you can, post a picture. I just did a simular job; 18' of bookcase in 1/4 sawn oak to mat ...

    Re: How long should this take?
    A message posted at WOODWEB's CNC Forum (11/14) -- I will have machine time on Thursday and plan to run these . I will post my results and how I came ...

    Re: Thin Veneer Wont Cut
    A message posted at WOODWEB's CNC Forum (10/14/24) -- I thought I posted a quick reply. Anyway, yes changing the direction of the cut fixed the probl ...

    Re: Exterior door
    A message posted at WOODWEB's Finishing Forum (10/14) -- Joseph, sorry for the delay just wanted to talk to the rep before I post his number here. Ca ...

    Re: Who's Using Multipoint Door Hardware
    A message posted at WOODWEB's Architectural Woodworking Forum (10/14) -- Thanks once again Joe. It's curious why they sell those cores with 7 mm vene ...

    Re: edge gluing direct from s4s/molder
    A message posted at WOODWEB's Cabinetmaking Forum (10/14) -- I have a Diehl rip saw and we glue up right from our rips. Many years ago, we did an out ...

    Re: CNC in a high school woodshop
    A message posted at WOODWEB's Business and Management Forum (10/14) -- I taught HS for 12 years, with and without CNC. It took me 6 years to get one, ...

    Re: new tools for my shop have 1200 ft now moveing too 8000 spot
    A message posted at WOODWEB's Cabinetmaking Forum (10/14) -- Those ridiculous numbers at the end of my post was supposed to be a smiley face... ...

    Re: curved stair handail questions for proffessionals
    A message posted at WOODWEB's Architectural Woodworking Forum (10/14) -- Those people that have not experienced or seen the products of a real crafts ...

    Re: Double Drum Sander
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/14) -- If your going to go with the double drum sander DONT buy the General ...

    Re: Can anyone write a post from Cabnetware 11 to WoodWop?
    A message posted at WOODWEB's CNC Forum (9/14/23) -- We figured out a workaround to get Cabnetware files to export to our new machine. If anyone is i ...

    Re: Which machinery supplier to use
    A message posted at WOODWEB's Business and Management Forum (9/14/21) -- Ron, I first want to be clear that I own Nutek Machinery. We import and serv ...

    Commercial Case Goods
    A message posted at WOODWEB's Business and Management Forum (9/14) -- I am getting ready to get into a new business. I have posted here in the past, ...

    Re: GIBEN bander parts and service
    A message posted at WOODWEB's Cabinetmaking Forum (9/14) -- the resolution was in the works before this post am I sure it would have happened without ...

    Re: interesting article about DIY market
    A message posted at WOODWEB's Business and Management Forum (9/14) -- I would like to add to this post. I watch a lot of youtube videos about the mob ...

    Mosaik for Closets - Anyone Using It?
    A message posted at WOODWEB's CAD Forum (9/14) -- Hello, first post and new to forums in general. Seriously looking at Mosaik, but would like to know ...

    measuring film thickness
    A message posted at WOODWEB's Finishing Forum (9/14) -- How many of you use a wet film thickness gauge on a regular basis? How many have and use a dr ...

    Re: What would be the issues with young interns?
    A message posted at WOODWEB's Business and Management Forum (9/14) -- Mistakenly or not.. Its an interesting post. I've been a Simpson's follower for ...

    Re: Houzz
    A message posted at WOODWEB's Business and Management Forum (9/14) -- I've never paid for my Houzz listing, but do occasionally get calls from it. Th ...

    Re: debris in white cv
    A message posted at WOODWEB's Finishing Forum (9/14) -- +1 on what Shane posted, you'll be surprised at what is in the bucket, especially if it has b ...

    Re: KD54 manual
    A message posted at WOODWEB's Cabinetmaking Forum (9/14) -- Byw. I'm a long time lurker and first time poster on this site...lots of really intellige ...

    Re: HDF cabinet doors
    A message posted at WOODWEB's CNC Forum (8/14/23) -- Interesting Adam, Sounds like a good way to do it. We ran some mdf doors lately and they wanted ...

    Re: First run at entry/exterior 5 panel, raised panel doors
    A message posted at WOODWEB's Architectural Woodworking Forum (8/14/22) -- Hello, Are those the original doors in the photograph? If so why not just ...

    Re: Employees
    A message posted at WOODWEB's Business and Management Forum (8/14) -- Mauricio congrats you are in the 1% for that wage, don't ever leave that job yo ...

    Re: Paint bridging in corners
    A message posted at WOODWEB's Finishing Forum (8/14) -- Anytime we have a cab with a painted interior, we paint the pieces prior to assembly. We asse ...

    Re: Paperless shop questions
    A message posted at WOODWEB's CAD Forum (8/14) -- Gavin, like I mention in the prior post, a remote desktop app enables you to access your computer a ...

    Re: Paperless shop questions
    A message posted at WOODWEB's CAD Forum (8/14) -- Hi Pat, hope you're doing well. There are some free desktop sharing applications I've used since th ...

    A thick epoxy question, not work related just rhetorical
    A message posted at WOODWEB's Architectural Woodworking Forum (8/14) -- So this morning we got yet again another request from a designer regarding &q ...

    Finally! Woven Wood Doors In Place
    A message posted at WOODWEB's Architectural Woodworking Forum (8/14) -- The Woven Wood Doors are finally in place. So much for March deadlines. The r ...

    Re: New to reclaiming
    A message posted at WOODWEB's Architectural Woodworking Forum (8/14) -- Looks like it has powder post beetle in it with all those tiny holes and mayb ...

    Re: How do you handle job-specific hardware components, logistically, in sh
    A message posted at WOODWEB's Cabinetmaking Forum (8/14) -- You might want to consider some kind of self-adhesive label you can apply to the edge of ...

    Re: 9" stain grade baseboard installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/14) -- Listen to the part of you that says hourly- your post strikes me as c ...

    Re: vac pump replacement Vanes
    A message posted at WOODWEB's Business and Management Forum (8/14) -- Mike I have a source but its at the office. If you still need it on Monday, I w ...

    Thick, Large Black Walnut Slabs
    A message posted at WOODWEB's Sawing and Drying Forum (8/14) -- Okay, Thanks to the help of a few of you on here I got the Black Walnut taken down an ...

    Re: Optimizers for the Mac
    A message posted at WOODWEB's CAD Forum (8/14) -- There's two standalone optimizers for mac that I know of: CabinetCut, and Cutterlist (the latter av ...

    Re: Air drying Cherry
    A message posted at WOODWEB's Sawing and Drying Forum (7/14/23) -- Not being kiln dried and not sterilized, you are asking for disaster when the proj ...

    Good method for orange peel prevention
    A message posted at WOODWEB's Finishing Forum (7/14) -- Hello, We're going to an ML Campbell conversion varnish. This is over a water base white prim ...

    Re: Graco airless GX19
    A message posted at WOODWEB's Finishing Forum (7/14) -- Thought I'd post a follow up for anyone considering this unit. After about a year and a half ...

    Re: Everlast polyurethane from Hood
    A message posted at WOODWEB's Finishing Forum (7/14) -- I have no idea about the age of this post, but I did want to comment about Hood's Everlast pr ...

    Re: More effective pocketing toolpath in Alphacam
    A message posted at WOODWEB's CNC Forum (7/14) -- I think all you need is a manual lead in with a slope. Pocket machining will not allow an automatic ...

    Honest Money Answers Please
    A message posted at WOODWEB's Business and Management Forum (7/14) -- Hello Everyone I just closed up a shop I owned for (33) years. Way too many rea ...

    Re: redwood wine barrel wood
    A message posted at WOODWEB's Cabinetmaking Forum (7/14) -- I looked that up after reading the original post. I knew water tanks were made of redwood ...

    Re: Does anyone have one of these?
    A message posted at WOODWEB's Cabinetmaking Forum (6/14) -- Pat I know who you are and have respected your post for a very long time, everyone here m ...

    Re: Busellato CNC Code
    A message posted at WOODWEB's CNC Forum (6/14) -- Lee: Hmmmm...that is simply g-code, which is a heck of a lot easier than the code I shared above! I ...

    Re: Drop in orders?
    A message posted at WOODWEB's CAD Forum (6/14) -- I miss posted that first chart it just shows low inflation. ...

    Re: Online Advertising
    A message posted at WOODWEB's Business and Management Forum (6/14) -- Sociologist, Before folks get off on a possible racist direction, you need to u ...

    Re: Internet marketing, prosumerism and paid bloggers.
    A message posted at WOODWEB's Business and Management Forum (6/14) -- Mel is for sure for millenial!!! Wasn't before, but it sure is now! Guessing th ...

    Re: Internet marketing, prosumerism and paid bloggers.
    A message posted at WOODWEB's Business and Management Forum (6/14) -- I guess I'm just a little bitter as to where the internet has driven consumers. ...

    Re: Through tenon modern tables
    A message posted at WOODWEB's Furniture Making Forum (6/14) -- I guess not modernish table but modern as the original post states on the subject head ...

    Re: Finished Ends on Prefinished Cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (5/14) -- Hi Kalvin, You may want to check out the Lamello P-System. Installing face frames and fin ...

    Re: 32mm question
    A message posted at WOODWEB's Cabinetmaking Forum (5/14) -- Rich, Funny, I read through a lot of posts and I don't see resumes on them. Because I sai ...

    Re: Need help$$$
    A message posted at WOODWEB's Cabinetmaking Forum (5/14) -- If you are fine with the pay, why did you post in the first place? Just keep working, mil ...

    Re: Moisture discolouration
    A message posted at WOODWEB's Finishing Forum (5/14) -- I'm not sure i'd go as far as Shane, but i'd give a similar answer. I think it's fine to say ...

    Re: Biesse XNC Programming Question
    A message posted at WOODWEB's CNC Forum (5/14) -- I have posted a simple routing program. What would you suggest to remove ? I don’t think it would b ...

    Re: Spraying sealer from 55 gal drums
    A message posted at WOODWEB's Finishing Forum (5/14) -- I only use about 5 gallons a week of post cat sealer but much like you l got tired of cleanin ...

    Re: fan on or off while final coat sets up?
    A message posted at WOODWEB's Finishing Forum (5/14) -- Were both pieces the same ? If I understand your post correctly ,one was sapele ,the other wa ...

    Re: If you were an employee again, what would you ask at an interview?
    A message posted at WOODWEB's Business and Management Forum (5/14) -- Robert, Half of your complaints seem to revolve around scheduling issues and un ...

    Re: If you were an employee again, what would you ask at an interview?
    A message posted at WOODWEB's Business and Management Forum (5/14) -- ah cabmaker, we posted at the same time. Thanks for the harshness removal :) I ...

    Re: enclosures for photography dark room
    A message posted at WOODWEB's Architectural Woodworking Forum (5/14) -- I just made myself a slider. After much consideration and a post or two here, ...

    Re: RUNNING PVC moulding on High speed moulder
    A message posted at WOODWEB's Architectural Woodworking Forum (5/14) -- Luke A company named NuCedar out of Massachusetts mills this type of product, ...

    Re: Portable Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (4/14/24) -- Yes, I think a stationary unit is best for me because I rarely do curve and when I do ...

    Re: Cutting parts
    A message posted at WOODWEB's CNC Forum (4/14) -- Since this is a post about making money with your new machine, I will answer directly how we “do it ...

    Re: Amazon going to be selling cabinets soon
    A message posted at WOODWEB's Business and Management Forum (4/14) -- There are several reasons I pay a lot of attention to Amazon. The first one wou ...

    Re: is this African Walnut?
    A message posted at WOODWEB's WOODnetWORK Forum (4/14) -- Hi Gene So you are agreeing with David that it is Indiana Mahogany? oh wait....the other Da ...

    Re: It's time to chuck cnc in my tool belt.
    A message posted at WOODWEB's CNC Forum (4/14) -- Forget both of them and learn something like Aspire or another 3d program. Most of the good ones wi ...

    Re: switching to solid model
    A message posted at WOODWEB's CAD Forum (4/14) -- Pat I think you maybe missing the point here. The original poster has already hired a new draftsman ...

    Re: Off-the-gun shellac satin/matte
    A message posted at WOODWEB's Finishing Forum (3/14) -- Thanks Pete. The spraying I do now, although I agree is too laborious, is still less time tha ...

    Re: Proposal
    A message posted at WOODWEB's Business and Management Forum (3/14) -- I'm on a deadline and don't have time to write a lot but I wanted to post a de- ...

    Re: Cleaning my new Kremlin 15C25
    A message posted at WOODWEB's Finishing Forum (3/14) -- I use a similar system on my CAT AAA to the rest of the guys, and yeah, the thinner can stay ...

    Re: software similar to woodwop for non-homag/weeke machine?
    A message posted at WOODWEB's CNC Forum (3/14) -- I already have woodwop 5 and 7 but my company is getting a massive (24' bed!!!) new Anderson that p ...

    Re: Quickly reverse timber shrinkage?
    A message posted at WOODWEB's Furniture Making Forum (3/14) -- Matt Cooper: If I read your post correctly, you have a problem with one table because ...

    Re: CAD v. Vetrixc software?
    A message posted at WOODWEB's CAD Forum (3/14) -- Q) do you have cad experience now ? I have never used a proper cad system yet i do all my cad work ...

    Re: Concerning wormy chestnut...Part 2:
    A message posted at WOODWEB's Finishing Forum (3/14) -- Keeping it simple sounds like a plan. This might be the product you're looking for. I've used ...

    Re: Huge quartersawn oak problem
    A message posted at WOODWEB's Furniture Making Forum (3/14) -- My guess is the lumber was air dried too quickly causing "honeycomb". If so ...

    Re: Wide Belt Sander for finishing panels
    A message posted at WOODWEB's Finishing Forum (3/14) -- www.goinge.com.tw/lacquer-panel-widebelt-sander/newtype.html Here is the fixed link, i can do ...

    Re: pigmented conversion varnish or tinted pre cat
    A message posted at WOODWEB's Finishing Forum (3/14) -- Not sure what the problem is, but the data sheets aren't attaching to the post - something to ...

    Re: will it work (repair question)?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/14) -- To David R Sochar: Okay I've been caught using terms I don't fully understand ...

    Re: will it work (repair question)?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/14) -- google, To get back to your original question, in post # 5 Mike hit the nail ...

    Re: Coping saw teeth direction
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/14) -- Somebody post a video cause I don't follow how to use a pull stroke t ...

    Re: Help Me Design A CNC Unit
    A message posted at WOODWEB's CNC Forum (2/14/23) -- Sorry about the wrong picture added to my other post. I own a Shaper Origin and it basically use ...

    Re: spray room layout
    A message posted at WOODWEB's Finishing Forum (2/14) -- Adam and others; i get the dust and contamination concern. with a powerful fan i am expecting ...

    Re: Water Based Finishes
    A message posted at WOODWEB's Finishing Forum (2/14) -- Robert, Thanks for the reply. I originally wanted to leave brand names out of my post. Howeve ...

    Re: Another router bit question
    A message posted at WOODWEB's Cabinetmaking Forum (2/14) -- I think Larry's advice is well given. As Mark pointed out we will certainly pay attention ...

    Re: I was right all along. Woodworking shop owner=%20lack of education+ horri
    A message posted at WOODWEB's Business and Management Forum (2/14) -- "Whether this is the old Mel or a new one, matters not. The view expressed ...

    design software for cnc
    A message posted at WOODWEB's CNC Forum (2/14) -- Thought I would start another string as it relates to my due diligence in regards to my cnc conside ...

    Re: edge bander not turning on
    A message posted at WOODWEB's Business and Management Forum (2/14) -- You are going to have to open the cover below the glue pot and below the trimme ...

    Re: design software for cnc
    A message posted at WOODWEB's CNC Forum (2/14) -- Henry- I would seriously consider sticking with KCD. Call KCD and find out if they have a post for ...

    Re: edge bander not turning on
    A message posted at WOODWEB's Business and Management Forum (2/14) -- Trace the source of the controller to the I/O leads below in the cabinet - take ...

    Re: Trying to find a old style hinge
    A message posted at WOODWEB's Cabinetmaking Forum (2/14) -- Please post a picture that shows the knuckle completely and possibly one from the back si ...

    log lathe
    A message posted at sawdry (12/31) -- First of all I don't know if this is the right place to post so if it isn't can the mods move it for me Iam bui ...

    Re: Mozaik to Weeke
    A message posted at WOODWEB's CAD Forum (2/14) -- You are going to have to look @ the post and go line by line to make sure it is correct. Hopefully ...

    Re: Business owners, managers, fellow woodworkers...What am I worth?
    A message posted at WOODWEB's Business and Management Forum (2/14) -- The boss states that your group in a bit on the slow side. My first thought is ...

    Re: MV work orders
    A message posted at WOODWEB's CAD Forum (2/14) -- Larry Boyle helped me out yesterday so I thought I would post the fix for anyone in the future. Whe ...

    Re: AutoLISP for cabinets anyone?
    A message posted at WOODWEB's CAD Forum (2/14) -- Yes, I do, but it's been a few years since I looked at it. I have a VBA macro that exports g-code f ...

    Re: Table leg joint strength
    A message posted at WOODWEB's Furniture Making Forum (2/14) -- Delivered the table yesterday. The dovetail was more than adequate and the table was a ...

    End grain veneering on MDF/Plywood
    A message posted at WOODWEB's Veneer Forum (2/14) -- Does veneering on the edge of MDF/Plywood have adverse affects when it meets the face of the sub ...

    Re: Is wood glue or gorilla glue better for gluing wood?
    A message posted at WOODWEB's Adhesives Forum (1/14/25) -- To the original poster, I've never seen a glue hold better than Titebond 2 or Titebond 3. ...

    Re: Goliath CNC router
    A message posted at WOODWEB's CNC Forum (1/14) -- I won't comment on the machine since I have never seen one in action.As a general principle I would ...

    MLC Turino
    A message posted at WOODWEB's Finishing Forum (1/14) -- I know this was posted a while ago but would like some feedback for those who are using/used ...

    Re: Goliath CNC router
    A message posted at WOODWEB's CNC Forum (1/14) -- Yep, that's the one. Have seen it or tried it? I'm very intrigued by the way it works. The videos t ...

    Re: Camworks Woodwop and Homag
    A message posted at WOODWEB's CNC Forum (1/14) -- Good Morning, I'm having trouble setting up a post-processor for camworks to work in woodwop. Someo ...

    Re: Best way to preserve freshly cut boards for outdoor use
    A message posted at WOODWEB's Sawing and Drying Forum (1/14) -- Yes ! That was the post I remembered ! But in my mind it had been about wood preserva ...

    Re: shaving sales
    A message posted at WOODWEB's Value Added Wood Processing Forum (1/14) -- not trying to be a smart *** wouldn't you want to have a market before you ...

    Re: Buying a millwork business in this economic climate
    A message posted at WOODWEB's Business and Management Forum (12/13/22) -- FM: I can see your other posts where you clearly appear to be in residentia ...

    Re: Drying Wet Plywood in a Boat
    A message posted at WOODWEB's Sawing and Drying Forum (12/13) -- Gene thank you for your message. If there is a more appropriate place for this post, ...

    Finding/building a new facility
    A message posted at WOODWEB's Business and Management Forum (12/13) -- I am starting a new business and could use some advice on locating a new facil ...

    Re: The best glues for exterior door panels that withstands heat
    A message posted at WOODWEB's Adhesives Forum (12/13) -- The wintertime open joint problem is the result of having wood that is not at the same MC as ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (12/13) -- I've been setting machinery professionally for over 35 years. You always go down ...

    Re: High pressure diaphram pumps to replace AAA pumps?
    A message posted at WOODWEB's Finishing Forum (11/13/21) -- I have made a mistake in my first post in this thread! Eric went to Renner in Italy. Not ...

    Re: Vacuum
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/13) -- Alex - Where do you guys come from? You obviously know next to n ...

    Re: Entry-level CNC for Small (1-2 man) Shop
    A message posted at WOODWEB's CNC Forum (11/13) -- Hello Guinea , Glad to read your post about cnc router demands . my name is Jack from china , we a ...

    Re: Creating a Job or creating a Business
    A message posted at WOODWEB's Business and Management Forum (11/13) -- That's a fair question Rich. I came out of a large corporation. Did the corpor ...

    Re: Wood species for black ext painted finish
    A message posted at WOODWEB's Finishing Forum (11/13) -- Thanks Jamie, That post @ Paint Talk was mine. I put it out there with a couple of forestry ...

    Re: shop rental rates for employees
    A message posted at WOODWEB's Business and Management Forum (11/13) -- Context is key. Are they making 10 cutting boards a week? Or 100/week? If the ...

    Re: Creating a Job or creating a Business
    A message posted at WOODWEB's Business and Management Forum (11/13) -- What's your background Bill? Are you burnt out? Curious about your post. Not e ...

    Polished Steel legs
    A message posted at WOODWEB's Furniture Making Forum (11/13) -- Does anyone have a resource for Chrome or polished steel legs? not looking for indivi ...

    Re: High Volume CNC Shop Needed
    A message posted at WOODWEB's CNC Forum (10/13/24) -- Hi Rich and Gary, would have responded earlier but forgot my lodging info as just joined the fo ...

    Re: Weeke BHC 250
    A message posted at WOODWEB's CNC Forum (10/13) -- As stated in the post above you need to mill both sides of the panel the first time you use it. Th ...

    Re: Edge treatment
    A message posted at WOODWEB's Cabinetmaking Forum (10/13) -- If your trying to emulate dog doo factory cabinets why ar eyoh posting a question in the ...

    Re: Shaper questions for doors
    A message posted at WOODWEB's Cabinetmaking Forum (10/13) -- Rich, Sorry I typed this and it never posted. I would say the few cutters I have so far ...

    Re: Cabinetshop management question
    A message posted at WOODWEB's Business and Management Forum (10/13) -- David's story illustrates the less government the better. Ironic. Great story ...

    Re: Dust problem
    A message posted at WOODWEB's Finishing Forum (10/13) -- I am not sure that there is no problem from the spray system. However, we have it whether we ...

    Re: Dust problem
    A message posted at WOODWEB's Finishing Forum (10/13) -- Thank you all for your feedback so far. We had our finishing material supplier come in and h ...

    Re: Financing Machinery
    A message posted at WOODWEB's Business and Management Forum (10/13) -- I generally always defer to all of the old souls in this group with regards to ...

    glazing
    A message posted at WOODWEB's Finishing Forum (10/13) -- I am glazing over a super white post cat lacquer and I don't want to have to spray a clear c ...

    Re: mystery ebonising technique - help please
    A message posted at WOODWEB's Finishing Forum (10/13) -- Hi Rick, thanks for the post. It sounds very promising. I'll get onto buying a copy of this ...

    Re: veneer panel discoloration
    A message posted at WOODWEB's Veneer Forum (10/13) -- If you are having problems posting a picture, you can send it directly to me and I will add it ...

    Re: veneer panel discoloration
    A message posted at WOODWEB's Veneer Forum (10/13) -- I have tried to post a photo of the discoloration with no success it follows the grain in some ...

    Re: Sharp MW drawer and electric cord run
    A message posted at WOODWEB's Cabinetmaking Forum (9/13/21) -- There are not too many positive answers to be gleaned from routing factory wired MW pl ...

    Re: Why is there something like unemployment
    A message posted at WOODWEB's Business and Management Forum (9/13/21) -- Lots of experts in people and lower class employment in this post! LOL Remin ...

    Re: Finish for reclaimed wood
    A message posted at WOODWEB's Finishing Forum (9/13) -- you should look into an acylic polyurethane... like Sayerlack TZL7105 5 Gloss..Through the Sh ...

    Re: What would be the issues with young interns?
    A message posted at WOODWEB's Business and Management Forum (9/13) -- Yes Mark, I am intriguing. The cartoon was mistakenly posted to this thread. ...

    Small product, large quantities - finishing cherry
    A message posted at WOODWEB's Finishing Forum (9/13) -- Hi everyone, First post here, though I frequent the forums. I recently started a little woodw ...

    Re: US Air Compressors / GSI
    A message posted at WOODWEB's Cabinetmaking Forum (9/13) -- Wye-Delta Start is not a soft start! If you ever need to replace the motor be sure to get ...

    Re: US Air Compressors / GSI
    A message posted at WOODWEB's Cabinetmaking Forum (9/13) -- I got the impression that the controller is fully programmable.They asked what initial se ...

    3/8 air hose line
    A message posted at WOODWEB's Finishing Forum (9/13) -- I am going to switch my air lines from 1/4 to 3/8 to run an hvlp gun. I read a lot of past po ...

    Re: Passing of Gene Wengert - "The Wood Doctor"
    A message posted at WOODWEB's WOODnetWORK Forum (8/13/25) -- Dr. Wengert’s wisdom and generosity truly shaped the woodworking community. His ability ...

    Automotive clear coat polyurethane heat resistance
    A message posted at WOODWEB's Finishing Forum (8/13/23) -- I have read posts here about many guys using automotive clears. as topcoats on wood with g ...

    Re: Best 1/2" router bit for 3" mortise
    A message posted at WOODWEB's CNC Forum (8/13) -- That tool rich posted is what I run when doing deep mortises in solids and I to a spiral down pocke ...

    Re: Alphacam to Woodwop (Homag machines)
    A message posted at WOODWEB's CAD Forum (8/13) -- This CAN be done, but you need a very specific post as the Homag G-Code is as unique as they come. ...

    Re: Cnc service, or lack of?
    A message posted at WOODWEB's CNC Forum (8/13) -- Marc, The actual problem is listed in the post 2 before this one, thanks. ...

    Re: Burl Identification
    A message posted at WOODWEB's Finishing Forum (8/13) -- Thanks Wayne. Give me 24 hours and I'll post updated pictures (I've been "cleaning" ...

    Re: Rent or buy our first shop?
    A message posted at WOODWEB's Business and Management Forum (8/13) -- I would think rent or lease while you are starting your business then after a f ...

    Re: Bandsawing letters
    A message posted at WOODWEB's Business and Management Forum (8/13) -- Clint, You've posted here before, learn from that experience. It's a public for ...

    9" stain grade baseboard installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/13) -- I've been asked to quote the installation of 9" x 3/4" stai ...

    Re: Reinforced Miters
    A message posted at WOODWEB's Architectural Woodworking Forum (8/13) -- Geoff, By nature applied moldings are not the best design to face bad exposur ...

    Re: Paul Downs Book
    A message posted at WOODWEB's Business and Management Forum (8/13) -- paul, i saw this post, purchased the book for my kindle last night, and am 20% ...

    Re: conversion varnish cure failure
    A message posted at WOODWEB's Finishing Forum (8/13) -- In response to the most recent posts to this thread, the hotter coat did kick off the uncured ...

    Re: Pricing methods revealed
    A message posted at WOODWEB's Cabinetmaking Forum (8/13) -- I price things much easier, if on 8.5 X 11 I print out one complete set and on my desk I ...

    Re: Aspire Biesse post processor
    A message posted at WOODWEB's CNC Forum (8/13) -- as i know Aspire not suport 5 axiss so pp to biesse very simlple(CID format) no need iso code so BS ...

    Re: Need Tips For orange Peel
    A message posted at WOODWEB's Finishing Forum (8/13) -- Whoops....didn't see Mastercabmans posting where he asked some of the same ?'s I just did. So ...

    Gingko Logs
    A message posted at WOODWEB's Sawing and Drying Forum (8/13) -- My first post on this forum. Anybody have experience sawing and using gingko? We've a ...

    Re: stairway I built from my homemade mill
    A message posted at WOODWEB's Sawing and Drying Forum (8/13) -- Sorry for the late post, but I doubt poplar will last 3 years outside without paint. ...

    Re: Blushing troubles
    A message posted at WOODWEB's Finishing Forum (7/13/25) -- Are you staying within your brand system or are you mixing different products to get your ...

    Veneered exterior entry door
    A message posted at WOODWEB's Architectural Woodworking Forum (7/13/24) -- I am making a standard size slab style door from VG Douglas Fir. It will b ...

    Air drying Cherry
    A message posted at WOODWEB's Sawing and Drying Forum (7/13/23) -- Hello all - long time reader - first time poster. I have a hobby sawmill and woodw ...

    Re: Autodesk Fusion
    A message posted at WOODWEB's CNC Forum (7/13) -- Just rereading these posts. I noticed that you asked if anyone had done 3D drawings in Fusion360. P ...

    Re: shaker doors
    A message posted at WOODWEB's Cabinetmaking Forum (7/13) -- From the picture you posted, you've still got some end grain edge sanding to do. I build ...

    Re: Too much time estimating
    A message posted at WOODWEB's Business and Management Forum (7/13) -- Im not getting email notifications that people have posted. Sorry for the lag. ...

    Floating Shelf Bracket
    A message posted at WOODWEB's Cabinetmaking Forum (7/13) -- Hi Everyone, I am looking for a better solution to mount a 12" deep x 2 1/2" th ...

    Re: CNC bit Chipping
    A message posted at WOODWEB's CNC Forum (7/13) -- If you have been reading posts here before, you should know that you need to provide more informati ...

    Re: Bed design help
    A message posted at WOODWEB's Furniture Making Forum (7/13) -- I found some more notes. There are three (3) boxes on each side (not the 4 I thought). ...

    Re: huge mistake with heavy bar over floating floor.
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/13) -- Like Marty, I'm not at all convinced that the bar caused this problem ...

    Re: huge mistake with heavy bar over floating floor.
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/13) -- as was said in a previous post, could it be the basement ceiling that ...

    Re: Jon Elvrum
    A message posted at WOODWEB's Cabinetmaking Forum (6/13/24) -- Jon was a 'forum technical advisor' on Woodweb some 20 years ago. A lot of his forum p ...

    Re: Applying water base paint to a solvent-based finish…
    A message posted at WOODWEB's Finishing Forum (6/13) -- No one said throw caution to the wind and take a risk just blasting a paying job with a new p ...

    Re: Applying water base paint to a solvent-based finish…
    A message posted at WOODWEB's Finishing Forum (6/13) -- MarkB While I appreciate your standpoint and where you’re coming from, I’m just not in a posi ...

    Re: drilling cast iron shaper tables
    A message posted at WOODWEB's Solid Wood Machining Forum (6/13) -- It's really hard to say without some details like where it is going to be mounted, ...

    Re: Cleaning Poplar for tinted lacquer
    A message posted at WOODWEB's Finishing Forum (6/13) -- Agreed. This guy was a piece of work. This was before I got a hold of them. I actually ripped ...

    Re: What CNC Nesting Software is everyone running?
    A message posted at WOODWEB's CAD Forum (6/13) -- Since posting this thread, I have been contacted by MV and are working towards a solution to all my ...

    Re: Online Advertising
    A message posted at WOODWEB's Business and Management Forum (6/13) -- Jim, Thanks for posting that blog about how to leverage social media. That was ...

    Re: Online Advertising
    A message posted at WOODWEB's Business and Management Forum (6/13) -- Thanks Jim. I read through that yesterday but was tired, I will read it again w ...

    moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (6/13) -- Hey guys, just read posts oncutterheads but here's my situation. Just bought an ol ...

    Re: Reclaimed lumber
    A message posted at WOODWEB's Value Added Wood Processing Forum (6/13) -- Putting in new kitchen and family room floor this summer. Plan is to use 'r ...

    Re: Pullout that latches into back of drawer face?
    A message posted at WOODWEB's Cabinetmaking Forum (5/13/25) -- Thanks for posting back Chris. I'm going to play around with this some. ...

    Re: CNC software
    A message posted at WOODWEB's CNC Forum (5/13) -- I use Mozaik and have no problems with it what so ever. I purchased a new cnc 1 1/2 years ago and m ...

    Re: conversion spray guns
    A message posted at WOODWEB's Finishing Forum (5/13) -- Like the other posters have noted, you can't beat the simplicity of a gravity gun with a disp ...

    Re: Bob Buckley Altendorf Tune Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (5/13) -- Thanks Kevin. We already use the 5 cut square process to evaluate how well the saw is cut ...

    Re: White melamine blunting 3/8" cutters
    A message posted at WOODWEB's CNC Forum (5/13) -- I do appreciate you help on this Mark, I didn't intend for my post to come across as snarky. I am n ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (5/13) -- Mel, Wow, what a drama queen you are. I read this thread and I was ready to jum ...

    Re: Bob Buckley Altendorf Tune Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (5/13) -- Mark, Please do post a PDF. One of your two pics was very clear. One a bit fuzzy. I found ...

    Re: Liner for curling iron
    A message posted at WOODWEB's Cabinetmaking Forum (5/13) -- Thanks for all the responses. Before I posted I thought of tail piece so I went I got one ...

    Re: Bob Buckley Altendorf Tune Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (5/13) -- Tim, Apologies for the superfluous information. If you get what you are looking for can y ...

    Re: Bob Buckley Altendorf Tune Up Guide
    A message posted at WOODWEB's Cabinetmaking Forum (5/13) -- I just snapped a couple of pics from an old Cabinet Makers Association magazine with my c ...

    Re: AAA pumps electric or pneumatic
    A message posted at WOODWEB's Finishing Forum (5/13) -- Joe, that's one reason I put in my first post to contact CA Tech, they can explain answers to ...

    Re: Concealed hinge
    A message posted at WOODWEB's Cabinetmaking Forum (5/13) -- I need the cup. I thought I posted a picture but that didn't work. I can email you a phot ...

    Re: Pricing Lineal Mouldings
    A message posted at WOODWEB's Business and Management Forum (5/13) -- If you haven't changed the process in 15 years you shouldn't need to change the ...

    Re: Where Have All the Carpenters Gone?
    A message posted at WOODWEB's Business and Management Forum (4/13) -- In the 1970's lots of people moved from the city to western Massachusetts, and ...

    Re: New residential shop
    A message posted at WOODWEB's Cabinetmaking Forum (4/13) -- Paul, I watched the video you posted, the table is an interesting project. I am going to ...

    Re: Custom Furniture at a Cabinet Shop
    A message posted at WOODWEB's Business and Management Forum (4/13) -- Hi All, @ Robert and @ Pat Gilbert, Thanks this was the kind of advice I was lo ...

    Re: AMC Controller
    A message posted at WOODWEB's CNC Forum (4/13) -- We have recently purchased a used 5x12 CR Onsrud CNC router and it does have this control. At first ...

    Re: RE: Starting New Wood Business
    A message posted at WOODWEB's Business and Management Forum (4/13) -- Im with Bill, Your employees are the least of your concerns. Social media, glob ...

    Re: Commercial Bid Software/Services
    A message posted at WOODWEB's Business and Management Forum (4/13) -- Thanks for your informative post. we also seeking for best software for biding. ...

    Woven Wood Doors, Part V Success!
    A message posted at WOODWEB's Architectural Woodworking Forum (4/13) -- Part Five - Success! We set a straight edge (door stile) and a rail at a good ...

    Re: parts for Casadei industria edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (4/13) -- Alain, Your machine is actually made by a company called SM Mechanica in Italy. It was so ...

    Re: Hardware Management: Nomenclature Improvement
    A message posted at WOODWEB's Business and Management Forum (4/13) -- Derrek, Could you post a picture of that label template? ...

    Re: Lock mitre joint
    A message posted at WOODWEB's CNC Forum (4/13) -- Thanks for all your suggestions, as far as I can tell the Titman tool in my original post allows yo ...

    Re: Three S (?) programs
    A message posted at WOODWEB's Business and Management Forum (4/13) -- Tim, I have a few questions so I hope you will let me hijack your thread for a ...

    Re: Custom Cabinetry and remodeling
    A message posted at WOODWEB's Business and Management Forum (3/13/25) -- I also meant to mention; It's been almost 2.5years since you made post; just ...

    Re: Custom Cabinetry and remodeling
    A message posted at WOODWEB's Business and Management Forum (3/13/25) -- I also meant to mention; It's been almost 2.5years since you made post; just ...

    Re: Paint Booth Makeup air with 9,000 CFM exhaust
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (3/13/25) -- post this in finishing section. probably get more help there. ...

    Re: Automatic Tool Change Alternative System
    A message posted at WOODWEB's CNC Forum (3/13/24) -- I was too late to edit the last post and add this quote from the website: "Torque applied t ...

    Storage Ideas
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (3/13/22) -- I have a friend who owns a commercial architectural millwork c ...

    Re: Mozaik Help
    A message posted at WOODWEB's CAD Forum (3/13/22) -- Then get Mozaik to get you a working post? ...

    Re: Pre-cat VS CV for kitchen re-sprays
    A message posted at WOODWEB's Finishing Forum (3/13) -- As far as pre-cat vs post cat I think it depends on the product you use and if it is applied ...

    Suggestions on handling euro sized sheets
    A message posted at WOODWEB's Cabinetmaking Forum (3/13) -- Many of these new textured melamine products on the market today measure 7'x9'. We are a ...

    Optimize parameters for mills with tips
    A message posted at WOODWEB's CNC Forum (3/13) -- Hello Thank you for entering in my post How important is optimizing parameters for a mill with tips ...

    software similar to woodwop for non-homag/weeke machine?
    A message posted at WOODWEB's CNC Forum (3/13) -- is anyone aware of software LIKE woodwop (ease of use, no cad files to import) for programming NON ...

    Re: I was right all along. Woodworking shop owner=%20lack of education+ horri
    A message posted at WOODWEB's Business and Management Forum (3/13) -- Puzzleman, Yes those questions were directed at me. I'll be honest with you fol ...

    Re: Can a bandsaw replace a table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- Well here's the problem: You post has context ( Ripping), but lacks specificity. R ...

    Re: Spoilboard clean up between cycles
    A message posted at WOODWEB's CNC Forum (3/13) -- Dan, How close do you run your dust skirt to the table surface when you run the cleaning program? D ...

    Re: Plot Templates
    A message posted at WOODWEB's CAD Forum (3/13) -- You need to know the plotters print margins and you need to make a custom paper size for 24" x ...

    Re: who owns a design?
    A message posted at WOODWEB's Furniture Making Forum (3/13) -- Go to speak to a lawyer that specializes in intellectual property. They can at least a ...

    Update on getting crap in the finish
    A message posted at WOODWEB's Finishing Forum (2/13/25) -- Somewhat recently, I posted about getting particles of crap in my finish and I have tried ...

    Re: Pre-cat failure
    A message posted at WOODWEB's Finishing Forum (2/13/23) -- Jeff, Please post the manufacturer & product. There’s no point in protecting them at t ...

    Re: MLC vs Lenmar
    A message posted at WOODWEB's Finishing Forum (2/13/22) -- Daniel Thanks for your opinion I also not crazy about pre-cat I'm trying the Lenmar pre-ca ...

    Re: New Bander SCM ME-20
    A message posted at WOODWEB's Cabinetmaking Forum (2/13) -- Hi, I could not have said it better than Oggie As for the second part of his post, I have ...

    Re: Vcarve and Biesse
    A message posted at WOODWEB's CAD Forum (2/13) -- I have created a perfectly working post for BIESSE rover machines. Contact me and I can get you set ...

    Re: Using air dried wood and warping
    A message posted at WOODWEB's Furniture Making Forum (2/13) -- You can strongly advocate for air dried lumber up until you get a call from a customer ...

    Re: Cooking green wood in linseed oil
    A message posted at WOODWEB's Sawing and Drying Forum (2/13) -- Thanks EC Aumiller, looks like I missed that post from last July. That thread might b ...

    Re: air drying 1/2" red oak in a heated garage
    A message posted at WOODWEB's Value Added Wood Processing Forum (2/13) -- Ed, To get the flattest material when stickering rough 4/4 lumber, it's bes ...

    tool changer options
    A message posted at WOODWEB's CNC Forum (1/13/22) -- Okay some machines have linear tool changer's and some rotary what are the advatage's? i would l ...

    Re: Circular staircase and how to create reveal between parapet cap and pla
    A message posted at WOODWEB's Architectural Woodworking Forum (1/13/22) -- files missing from initial post - see attached ...

    Re: Max span for thick plywood shelves
    A message posted at WOODWEB's Cabinetmaking Forum (1/13) -- Let me add to my post that the edge would be 1 1/2 wide x 3/4 thick ...

    Re: exterior wood choices for doors
    A message posted at WOODWEB's Architectural Woodworking Forum (1/13) -- Apropos of Tim's post I am surprised that torrified or thermally modified pop ...

    Re: Prop 65
    A message posted at WOODWEB's Business and Management Forum (1/13) -- Prop 65 is a state issue, while some references here have spoken of disability ...

    Re: CNC recommendation for school
    A message posted at WOODWEB's CNC Forum (1/13) -- Like I said earlier in this post. I was the lead model maker for Caterpillar Industrial Design. I r ...

    Re: Microvellum Reports
    A message posted at WOODWEB's Cabinetmaking Forum (1/13) -- Hi Matthew, I'm sure our Support Team will be responding to your request on Monday. Until ...

    1999 Rover NC500 importing DXF issues
    A message posted at WOODWEB's CNC Forum (1/13) -- This is my first post and hopefully I can clear up this issue. We have two 1998-99 Rover 20 with th ...

    Re: what can i do to speed drying
    A message posted at WOODWEB's Finishing Forum (1/13) -- thanks for the replies. i'm not looking to replicate an almost instant cure with a heat air m ...

    Re: How to close a business and deal with debt?
    A message posted at WOODWEB's Business and Management Forum (1/13) -- I'm with the Jim that posted above. It may be easier to work your way out of yo ...

    Re: Looking for opinions on nested base routers
    A message posted at WOODWEB's CNC Forum (1/13) -- That is information that was missing earlier in this post. If you have the room, You could do the r ...

    Re: I am at a loss and I have no idea what to do
    A message posted at WOODWEB's Finishing Forum (12/12/24) -- Leo, regarding the booth. That isn’t the issue, as I think the enclosure I made around th ...

    Re: Vinyl Primer taking to long to dry
    A message posted at WOODWEB's Finishing Forum (12/12/22) -- Vinyl Sealers are typically low solids off the bat, like 17%ish. Any more than around an ...

    Re: Dark paint dry times
    A message posted at WOODWEB's Finishing Forum (12/12/22) -- Hey Paul Did you have any issues come back after putting clear over? As a previous poster ...

    Re: wb 2k finishes in small shop
    A message posted at WOODWEB's Finishing Forum (12/12) -- We sprayed ML Campbell 2K water for a while. Was a great product for us, incredibly tough fo ...

    Re: wb 2k finishes in small shop
    A message posted at WOODWEB's Finishing Forum (12/12) -- Weve sprayed a bunch of their 9300 for architctural work and use a lot of the 8300 for day t ...

    Order Entry, order tracking, inventory management software suggestions
    A message posted at WOODWEB's Business and Management Forum (12/12) -- We are a small commercial cabinet company making dozens of orders weekly. I’m ...

    Re: wb 2k finishes in small shop
    A message posted at WOODWEB's Finishing Forum (12/12) -- Mark , Thanks , I'm not totally clear on the difference between 2k and post cat finishes. I ...

    Can anyone identify this material/finish
    A message posted at WOODWEB's Cabinetmaking Forum (12/12) -- Hi everyone! I've been working in a cabinet shop for the last 8 years and have recently ...

    Countertop railing end caps
    A message posted at WOODWEB's Cabinetmaking Forum (12/12) -- We've got a project that has some 5/8" diameter brass railing around the island top ...

    Re: Veneer Failure
    A message posted at WOODWEB's Veneer Forum (12/12) -- Recently retired after 30+ years as a Finisher. The times I have seen failures like this is whe ...

    Re: Veneer Failure
    A message posted at WOODWEB's Veneer Forum (12/12) -- TM, still would be nice if you could post some photos. Seems to me that if everything is failin ...

    Re: Dealer for Lobo machinery
    A message posted at WOODWEB's WOODnetWORK Forum (12/12) -- I know this is an old post but. Lobo contact: Robin 562-889-1168 or Castelli Industries 62 ...

    Re: Software for CNC
    A message posted at WOODWEB's CAD Forum (12/12) -- Another vote for Vectric, Vcarve pro $600, great for signs. I always plug there software even thou ...

    Re: Veneered exterior entry door
    A message posted at WOODWEB's Architectural Woodworking Forum (11/12/24) -- Meant to post some photos months ago- the door came out great. Install ha ...

    Re: Mdf recess panel doors
    A message posted at WOODWEB's CNC Forum (11/12/21) -- Johnathan, melamine backer MDF is "quite" common among mat. distributors, ask your lo ...

    Re: Solid walnut countertop
    A message posted at WOODWEB's Architectural Woodworking Forum (11/12) -- gorgeous (solid) tops, I'll come back & post some pics of mine after I g ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/12) -- ok. That is what I was thinking. I have to see if we can do that. For some reason ...

    Outputting 2 "Z Values" in Mozaik?
    A message posted at WOODWEB's CAD Forum (10/12/22) -- Hello, The CNC machine I am looking at has two ballscrews for the Z. The Router Spindle will us ...

    Re: eCabinets interest seems to have faced
    A message posted at WOODWEB's CAD Forum (10/12/21) -- Thanks, but I guess I was not clear. I could not edit the thread title once posted, and mis-typ ...

    Re: Glaze alternatives
    A message posted at WOODWEB's Finishing Forum (10/12) -- Tyler.. im sorry you are mistaken. Sandblasting is very inconsistent, time consuming, and do ...

    Re: Low-tech heated air make up
    A message posted at WOODWEB's Finishing Forum (10/12) -- Thanks again, I appreciate the responses. Rich C, you hit the nail on the head with my situa ...

    Re: Low-tech heated air make up
    A message posted at WOODWEB's Finishing Forum (10/12) -- Something else you might consider is a negative air machine/scrubber. Someone on the Paint T ...

    Re: Recovering from burnout?
    A message posted at WOODWEB's Business and Management Forum (10/12) -- @ Glenn post #19, so you are recommending drowning to change your perspective? ...

    Re: CV on flex molding
    A message posted at WOODWEB's Finishing Forum (10/12) -- I've stained and cleared flex molding with a pre cat and had no issues with it. Pretty sure ...

    Re: Recovering from burnout?
    A message posted at WOODWEB's Business and Management Forum (10/12) -- Whoops, don't mind those notes at the top of my post. My bad... ...

    Re: Long time contributor passed away
    A message posted at WOODWEB's Cabinetmaking Forum (9/12) -- Tim was a really nice and genuine person. I followed his postings here for several years. ...

    Re: Long time contributor passed away
    A message posted at WOODWEB's Cabinetmaking Forum (9/12) -- I am glad we have respect among Cabinetmakers Tim was a well meaning poster he will be mi ...

    Re: Biesse CNC profile program
    A message posted at WOODWEB's CNC Forum (9/12) -- Further to Jason's post: Every thing can be and is variable. To draw your geometry, set up variable ...

    Re: IKEA coming to town (Small cabinet Company)
    A message posted at WOODWEB's Business and Management Forum (9/12) -- Funny shows up on preview but not on post ...

    Re: IKEA coming to town (Small cabinet Company)
    A message posted at WOODWEB's Business and Management Forum (9/12) -- Didn't take the photo on last post ...

    Another startup woodshop.
    A message posted at WOODWEB's CAD Forum (9/12) -- Hello Everyone! I am a self employed woodworker for 28 years. From 2000 to 2007 I was in a partners ...

    Re: laminating a 1/2" inside radius...
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/12) -- Yes it can but for a novice its highly NOT reccomended to try---you woul ...

    Re: Questions about processing S4S
    A message posted at WOODWEB's Cabinetmaking Forum (8/12/23) -- Timely post Chris I have the same question on S4S. I'm in a little city "Sacramen ...

    Re: What glue are they using?
    A message posted at WOODWEB's Architectural Woodworking Forum (8/12) -- Funny that this post would come about today. Yesterday I had a customer come ...

    5 axis feed rate adjustment in NC HOPS
    A message posted at WOODWEB's CNC Forum (8/12) -- Hello, does anyone have an insight on adjusting tool feed on 5 axis milling programs? We have some ...

    Re: Passing of a long time poster on the Woodweb
    A message posted at WOODWEB's Business and Management Forum (8/12) -- FWIW In the 90s CNC was a new thing to woodworking Alan was the go to guy to ga ...

    Re: Passing of a long time poster on the Woodweb
    A message posted at WOODWEB's Business and Management Forum (8/12) -- I have two MGBs (mine and my wife's) and face this issue all too often on the M ...

    Re: Training an CNC operator hybrid
    A message posted at WOODWEB's Business and Management Forum (8/12) -- Thanks everyone for all of the posts. I appreciate the insight. Cheers, Ben ...

    Re: Bandsawing letters
    A message posted at WOODWEB's Business and Management Forum (8/12) -- Read your initial post. You want advice on establishing new dealers as growth l ...

    Re: Pine Floors
    A message posted at WOODWEB's Architectural Woodworking Forum (8/12) -- It's based on a white point. I know the radiators are white. Then you readjus ...

    Re: New Employee
    A message posted at WOODWEB's Business and Management Forum (8/12) -- Depending on what state you are in you may need to have an injury prevention pr ...

    Re: Pine Floors
    A message posted at WOODWEB's Architectural Woodworking Forum (8/12) -- Leo, How do you know the color in the photo is wrong? (Not contradicting you, ...

    Re: Another chainsaw question
    A message posted at WOODWEB's Sawing and Drying Forum (8/12) -- Thanks for the reply rich. I am all set with pine. Thinking of all the nice maple and ...

    Re: gluing turning blocks for pillar bases
    A message posted at WOODWEB's Architectural Woodworking Forum (8/12) -- Both of you guys are technically a bit more advanced. Necessity being the mot ...

    Re: CAD software for cabinet shop
    A message posted at WOODWEB's CAD Forum (8/12) -- Hi Bruce, I saw your post that you are looking for a software to better your business. I work for K ...

    Re: Small shop PM software
    A message posted at WOODWEB's Business and Management Forum (7/12) -- I honestly cant count the times Ive had someone in the shop who has told me I n ...

    Re: wrench
    A message posted at WOODWEB's Solid Wood Machining Forum (7/12) -- Dom I have posted a link to the Weinig Tooling catalog page of the product you loo ...

    Re: Flexable coating
    A message posted at WOODWEB's Finishing Forum (7/12) -- Yep we have the same issue. If a joint cracks or opens due to climate change in the house, th ...

    Re: How much cross-grain is it okay to glue?
    A message posted at WOODWEB's Cabinetmaking Forum (7/12) -- The Greene brothers used screws to hold there bread board ends on and covered them with e ...

    Profit margin
    A message posted at WOODWEB's Business and Management Forum (7/12) -- ok I have a few questions and I am sure this is pretty vague and will need more ...

    Re: Who Sells Salice Corner Hinges
    A message posted at WOODWEB's Cabinetmaking Forum (6/12/24) -- Hello Jonathan, From your photos, this appears to be a +45-degree corner hinge. Mepla ...

    Re: tips for un-backed veneer without a vacuum press
    A message posted at WOODWEB's Veneer Forum (6/12/22) -- Hey Rich-- I got to thinking about it, and after seeing how many new possibilities a vacuum p ...

    Re: Applying water base paint to a solvent-based finish…
    A message posted at WOODWEB's Finishing Forum (6/12) -- Mastercabman, I agree with you on all points. It is still very unfortunate there are people o ...

    Re: Applying water base paint to a solvent-based finish…
    A message posted at WOODWEB's Finishing Forum (6/12) -- Ok Mike I think I understand better what you're asking after reading your last post So you wa ...

    Re: Applying water base paint to a solvent-based finish…
    A message posted at WOODWEB's Finishing Forum (6/12) -- Guys like BH have been reading my posts on WW for almost 20 years. I try my best to be as fac ...

    Re: Wishy washy software
    A message posted at WOODWEB's CAD Forum (6/12) -- Pat, Come on buddy, how in the world is my post political at all lol :) ...

    Re: Value In Experience?
    A message posted at WOODWEB's Business and Management Forum (6/12) -- I have always followed the same strategy - work hard to make myself indispensab ...

    Re: question around routing of electric cables over my Woodmizer LT-15 Elec
    A message posted at WOODWEB's Sawing and Drying Forum (6/12) -- Thanks Guys for the response. I made a mistake as my 20 foot steel I-Beam will be per ...

    Re: Solutions for parts orginization
    A message posted at WOODWEB's Cabinetmaking Forum (5/12/23) -- I am definitely not doing that number of doors, we are a small shop. What works well f ...

    Re: New CNC Router
    A message posted at WOODWEB's CNC Forum (5/12) -- We have a Biesse Rover S in our cabinet shop (mostly commercial work). This is our first CNC machin ...

    Re: Alcohol dye stain spraying.. use a retarder?
    A message posted at WOODWEB's Finishing Forum (5/12) -- John, What you are saying makes total sense. Noted. Thank you again for your help. This is ha ...

    Re: Alcohol dye stain spraying.. use a retarder?
    A message posted at WOODWEB's Finishing Forum (5/12) -- Thanks, but I'd rather you just made it easier to post pictures. I have no trouble on other s ...

    Re: Spraying sealer from 55 gal drums
    A message posted at WOODWEB's Finishing Forum (5/12) -- ok I misread the product number. The F6 is precatalyzed vinyl and the F7 is a post cat.. neve ...

    Re: Alcohol dye stain spraying.. use a retarder?
    A message posted at WOODWEB's Finishing Forum (5/12) -- Why is posting photos here so difficult? Vince, here is that photo - maybe. John ...

    Re: Weinig "CombiHead" or equivalent
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12) -- Dave Here are a couple of drawings of the the profile I was talking about over the ...

    Re: AAA pumps electric or pneumatic
    A message posted at WOODWEB's Finishing Forum (5/12) -- I'm sold on the aaa just want to understand how the pneumatic is different from the electric ...

    Re: Cutting Plastic Laminate
    A message posted at WOODWEB's CNC Forum (5/12) -- I second David's post. We use the exact same setup. Good to know we are doing something right! ...

    Re: Any clever systems for circulating WIP through your shop?
    A message posted at WOODWEB's Business and Management Forum (5/12) -- Haha-- not if i start making kitchens in my garage... then there will be so man ...

    Re: Cabinetry software and career advice
    A message posted at WOODWEB's CAD Forum (4/12/23) -- Hi Eric, Thank you for posting again. I sent you my phone number on your site. I like that you g ...

    Re: Fisheye Eliminator!
    A message posted at WOODWEB's Finishing Forum (4/12/22) -- Matt, What are your coatings of choice? If using Nitro,Pre Cat or CV. I like the product M ...

    Re: Rotting cedar
    A message posted at WOODWEB's Architectural Woodworking Forum (4/12/22) -- If the fence is going deep into the ground, we always prefer hardwoods lik ...

    Re: New residential shop
    A message posted at WOODWEB's Cabinetmaking Forum (4/12) -- Dennis, Your post is excellent in my opinion. I would second everything you said. It is r ...

    Re: Software for non-CNC shops
    A message posted at WOODWEB's CAD Forum (4/12) -- R Statham, Here are some screen shots from Mozaik, if you are not needing the CNC version it will c ...

    Re: Custom Furniture at a Cabinet Shop
    A message posted at WOODWEB's Business and Management Forum (4/12) -- Boxolagist : meaning low skill worker ,will work for below min wage thinking th ...

    Re: Closed Louver
    A message posted at WOODWEB's Solid Wood Machining Forum (4/12) -- I think it would be too unstable coming off the end of the moulder machine milling ...

    DIY debarker
    A message posted at WOODWEB's Sawing and Drying Forum (4/12) -- I am in central Ontario and have access to fallen redpine. I would like to debark to ...

    Re: Closed Louver
    A message posted at WOODWEB's Solid Wood Machining Forum (4/12) -- Sorry Here are the correct links,m sorry I posted the wrong ones. Maybe the staff ...

    Re: Client wants a brushed finish
    A message posted at WOODWEB's Finishing Forum (4/12) -- I've done this 100's of times, both in the shop and on-site. In the shop (and on-site if spra ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (4/12) -- Rob, I don't believe this is Mel's video, but was included by her as illustration ...

    What is this fastener called?
    A message posted at WOODWEB's Furniture Making Forum (4/12) -- I am repairing a mid century lounge chair for someone, and upon disassembling I found ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12/25) -- I haven't contacted weinig about it. Im sorry about my explanation. The snipe i ...

    Re: Panel saw variation
    A message posted at WOODWEB's CNC Forum (3/12/25) -- That's the cylinder not the valve. Please don't touch any of that. I'll post pics tomorrow. ...

    Automatic Tool Change Alternative System
    A message posted at WOODWEB's CNC Forum (3/12/24) -- As most here know I retired some years ago and then eventually set up a retirement shop. As part ...

    Re: Domestically produced plywood vs. imports
    A message posted at WOODWEB's Business and Management Forum (3/12) -- cabmaker - "The primary reason I color code cabinet elements is because I ...

    Re: Does Fastenlink work?
    A message posted at WOODWEB's Cabinetmaking Forum (3/12) -- Can't speak on Solidsetup but I can tell you that the folks at Fastenlink are tremendous. ...

    Re: Huge quartersawn oak problem
    A message posted at WOODWEB's Furniture Making Forum (3/12) -- Dominique: The phrasing of your problem makes it sound as though this is a relatively ...

    Re: CNC Solutions Dovetail Bit
    A message posted at WOODWEB's CNC Forum (3/12) -- It would help us if you could post the specs and number of the bit. ...

    Re: Drill bit replacement
    A message posted at WOODWEB's CNC Forum (3/12) -- When I read your first post, my thought was tolerance in the drilling head. Are you able to tell if ...

    Pricing within Cabnetware
    A message posted at WOODWEB's Architectural Woodworking Forum (3/12) -- I posted this same message in the Business/ Management forum, but I wanted to ...

    Re: Coping saw teeth direction
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/12) -- Mike I'm sorry, but I don't see much help there. Coping saws were des ...

    Re: Jobbing out stair treads
    A message posted at WOODWEB's Architectural Woodworking Forum (3/12) -- That's exactly my inclination, and the way I've always done it. However, in s ...

    Re: Cosmec Conquest 250- setting Z level in Osai 10 series control tables
    A message posted at WOODWEB's CNC Forum (2/12/25) -- Screenshots please - maybe I will remember what I used to do. I ran one of these controls for 5 ...

    Re: Pre-cat failure
    A message posted at WOODWEB's Finishing Forum (2/12/23) -- Jeff, Please post the manufacturer & product. There’s no point in protecting them at t ...

    Re: Longest Lasting Exterior Crucifix Hardwood
    A message posted at WOODWEB's Furniture Making Forum (2/12/22) -- Fred Frehner, Thank you for posting! I was actually thinking of White Oak or Maple ...

    Re: Software upgrade for generic Chinese CNC?
    A message posted at WOODWEB's CNC Forum (2/12/22) -- Ask them to send you a Gcode file. Then post it here and see if someone recognizes it as similar ...

    Re: Small portable gluepot edgebanders
    A message posted at WOODWEB's Cabinetmaking Forum (2/12) -- Oggie virtulex eb 135 safety speed 70 ha The 60 ha is hot air model only. Other is gluot. ...

    Re: cabnetware V work with apple os
    A message posted at WOODWEB's CAD Forum (2/12) -- One line question deserves a one line answer. No, it will not. For motivation, I will state that I ...

    Re: Resistant wrinkling over Clawlock 2
    A message posted at WOODWEB's Finishing Forum (2/12) -- I've seen many many post about problems with MLC in general... the wrinkling is not a sanding ...

    Re: Resistant wrinkling over Clawlock 2
    A message posted at WOODWEB's Finishing Forum (2/12) -- post your finish schedule... steps/times/sanding specs. etc etcas well as exactly your mix ra ...

    Re: Looking into using Mozaik, but...
    A message posted at WOODWEB's CAD Forum (2/12) -- The only thing that Mozaik uses Sketch up for really is rendering. Mozaik is a very powerful design ...

    Re: Why didn't this work. Elliptical routing
    A message posted at WOODWEB's Architectural Woodworking Forum (2/12) -- Thanks for posting that Keith. That is very good info. Years ago we built a l ...

    Re: Line boring accuracy
    A message posted at WOODWEB's Cabinetmaking Forum (2/12) -- My post would have been shorter had I seen Pat's. I've spent a lot of time on stops and f ...

    Cheap air lines....dumb idea????
    A message posted at WOODWEB's Business and Management Forum (2/12) -- OK so this is sort of related to my LED shop lights thread but figured I'd do a ...

    Re: Water Based Finishes
    A message posted at WOODWEB's Finishing Forum (2/12) -- We use AF72 clears. 00-90 sheen. These also work very well for bright colors and we have also ...

    Re: Level infeed bed on Weinig Powermat 500
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- Oops, accidentally posted the wrong image! Lol, kids coloring pages :-) ...

    Re: Business owners, managers, fellow woodworkers...What am I worth?
    A message posted at WOODWEB's Business and Management Forum (2/12) -- @ Cabmaker: I miss the blog, too. As for the book, I'm finishing the editing ri ...

    Re: Hi everyone. Happy New Year !
    A message posted at WOODWEB's Architectural Woodworking Forum (1/12/23) -- Bernard, Thanks for the great post. You are missed in the industry but sou ...

    Re: I have a felony
    A message posted at WOODWEB's Business and Management Forum (1/12) -- Its a cat and mouse game. The build a business or build a job thing is a wonder ...

    Re: Alphacam overcut corners
    A message posted at WOODWEB's CNC Forum (1/12) -- dont want to mess up owners post but mike i can't find any help files on the corner drilling. if yo ...

    Re: Software
    A message posted at WOODWEB's CAD Forum (1/12) -- Dennis. Thank you after my post I found out that all of kcd staff was working remotely and that not ...

    Re: Management Mechanisms
    A message posted at WOODWEB's Business and Management Forum (1/12) -- We use a (WIP) work in progress sheet that list every job. The front pages are ...

    Re: Management Mechanisms
    A message posted at WOODWEB's Business and Management Forum (1/12) -- At my shop, during the morning meeting, each person is given their plan for the ...

    Re: Advice for setting up small finishing room
    A message posted at WOODWEB's Finishing Forum (1/12) -- First off your posting on what is really setup to be for professionals. For your small setup ...

    Re: Laguna iq spindle
    A message posted at WOODWEB's CNC Forum (1/12) -- I would compare the g code from the previous version and the current. I'd suspect a post issue. ...

    Re: Finishing Cherry Top
    A message posted at WOODWEB's Finishing Forum (1/12) -- Hi Chris, I was going to say that you could leave some of that Black edging which would look ...

    Re: A solution to your employee problem
    A message posted at WOODWEB's Cabinetmaking Forum (1/12) -- Farms did a poor job of keeping everyone fed, there was no shortage of work though. IOW t ...

    Re: frameless cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (1/12) -- John, I have to chuckle. You aren't too quick to make changes are you? Conversion to fram ...

    Re: cabinet drawer lock - through gable
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/12) -- Thanks for the suggestions. I was hoping there was an off the shelf s ...

    Best way to preserve freshly cut boards for outdoor use
    A message posted at WOODWEB's Sawing and Drying Forum (1/12) -- I read on one of the forum from a sawyer who was dipping his boards in a solution of. ...

    Re: Cuts for quartersawn logs
    A message posted at WOODWEB's Sawing and Drying Forum (1/12) -- Thanks everyone and Pr. Wengert. I had read that entire section of the forum but befo ...

    Re: Spray gun review?
    A message posted at WOODWEB's Finishing Forum (1/12) -- I use a CAT gravity and a MACH 1 Binks from a pressure pot.....but pretty much agree what Her ...

    Re: Radiator for incoming finish room air
    A message posted at WOODWEB's Finishing Forum (12/11/24) -- NFPA 33 code requires 6 air exchanges per hour or 1 cubic foot per minute per square foot ...

    Re: Gluing thick veneer to Baltic birch plywood
    A message posted at WOODWEB's Adhesives Forum (12/11) -- I use type 2 PVA because its quick, easy and reliable - no worries about mixing, temperature ...

    new dry kiln on the cheap
    A message posted at WOODWEB's Sawing and Drying Forum (12/11) -- Howdy all, i will see if i can get some photos off my phone onto here so you can all ...

    Re: problems with shellac over poly...
    A message posted at WOODWEB's Finishing Forum (12/11) -- I am not attempting to promote anything. Being still a relatively new refinisher (I admit I ...

    Re: Faceframe rail on a shaper
    A message posted at WOODWEB's Cabinetmaking Forum (12/11) -- Hi I saw this post and thought of the jig I made for the shaper. I use it to size stiles ...

    Re: Bubbles,Contact Cement and Wood Veneers
    A message posted at WOODWEB's Adhesives Forum (12/11) -- I am going to be post veneering faceframes after the box is assembled and large wall panels ...

    Re: Installation Company for Denver, CO Projects
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/11) -- Marc - you are welcome to post a "Seeking Services" listin ...

    Commercial Top Laminating
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/11) -- Hello. Thought I'd post this here as well as the cabinetmaking forum. I ...

    Re: Microvellum issues/optional software
    A message posted at WOODWEB's CAD Forum (12/11) -- David, WoodCAD|CAM is not limited to Homag Machinery. We can communicate to other Cam software, op ...

    Re: Switching from Cabinet Vision
    A message posted at WOODWEB's CAD Forum (11/11/22) -- Hey Rufus good see you post To the OP tray Derek Slotmayer, last I heard he used Sollidworks fo ...

    Re: Production Management
    A message posted at WOODWEB's Business and Management Forum (11/11/21) -- Wow. This post really took off. I greatly appreciate the insight. I have de ...

    Re: Entry-level CNC for Small (1-2 man) Shop
    A message posted at WOODWEB's CNC Forum (11/11) -- "Buy your second machine first" well worn advice and when followed leads to less "B ...

    Re: Bare Minimum Modern Engineering Station?
    A message posted at WOODWEB's CAD Forum (11/11) -- I run Microvellum all day long. We had our IT guy build a comuter when we bough it about 2 years a ...

    Re: Entry-level CNC for Small (1-2 man) Shop
    A message posted at WOODWEB's CNC Forum (11/11) -- I just re read my post and I apologise. Of course employees can be trusted to run cnc routers w/o ...

    Re: Seal Coat over water based varnish
    A message posted at WOODWEB's Finishing Forum (11/11) -- In agreement with last two posts as well. Some of the water based varnishes have elastomeric ...

    Re: Making a living band sawing letters
    A message posted at WOODWEB's Business and Management Forum (11/11) -- Actually I do consider the posts you refuted to be good advice. David elaborat ...

    Re: Anyone using composite nails (like Raptor?)
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/11) -- In a prior post i said that the 'diamond' point raptor nails did not ...

    Re: Crown on a vaulted ceiling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/11) -- The crown molding lengths that are running parallel with the vault a ...

    Re: Decision about CNC
    A message posted at WOODWEB's CNC Forum (11/11) -- Nick, Are you getting good cutlist from KCD doing what you are doing now? If so you will be best s ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/11) -- Shaner In reference to the above post "Another could be too many knives in t ...

    Re: Crown on a vaulted ceiling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/11) -- Hi Mike, The photo you posted shows the crown cut and installed in a ...

    Re: Direct Marketing to A&D Community
    A message posted at WOODWEB's Business and Management Forum (11/11) -- While I appreciate everyone's input on marketing angles and do's and don'ts, t ...

    Re: Euro hinges
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/11) -- Hire a cabinetmaker. Euro hinges are not DIY. We sell time and abili ...

    Re: Dining table and bar top - solid vs veneer
    A message posted at WOODWEB's Furniture Making Forum (11/11) -- Tristan - I did not mean to insinuate that you did not know what you are doing or tha ...

    Re: Drill Bank Operation
    A message posted at WOODWEB's CNC Forum (10/11/23) -- I would contact Enroute about getting the proper training and post processor so move forward ...

    eCabinets interest seems to have faced
    A message posted at WOODWEB's CAD Forum (10/11/21) -- My use of it always was post CAD, i.e., we used it for buying carcases, fronts, d'boxes, etc., ...

    Re: Kem Aqua plus gravity feed
    A message posted at WOODWEB's Finishing Forum (10/11/21) -- I am a new bee and probably doing a once in a life time project of cabinet painting. i pu ...

    Re: Tax question for the self-employed
    A message posted at WOODWEB's Business and Management Forum (10/11) -- This thread, like almost all others on any financial topic is a bit discouragi ...

    Re: Shaker Doors
    A message posted at WOODWEB's Cabinetmaking Forum (10/11) -- I just sand with 150. But you could use a 1/16" radius round over router bit. They ...

    Re: Ultra-mat (0% to 5%MAX sheen) advise!
    A message posted at WOODWEB's Finishing Forum (10/11) -- Much appreciate this TYLER.... As you can see, it's MIA around here !?! But, with your scree ...

    Re: 5 axis CAM & post advice
    A message posted at WOODWEB's CNC Forum (10/11) -- I also recomended for this machine type Alphacam. I made a postprocessor for several machines like ...

    Re: Another software advice question
    A message posted at WOODWEB's CAD Forum (10/11) -- Been there done that. We have 18 guys and two routers now. When I finally forked over the note to ...

    Adhesive Choice Dilemma!!
    A message posted at WOODWEB's Adhesives Forum (10/11) -- Have a project coming up to make 2 overhead garage doors. I made one in the past which faces ...

    Jobsite Measuring Tools
    A message posted at WOODWEB's Cabinetmaking Forum (10/11) -- Pat Gilbert had a post on the millwork & installation forum about how to manage tool ...

      ---   Return to Top   ---   View More Results   


    Job Opportunities and Services Exchange Results:

    Commercial Casework & Fixtures Estimator - On Site Postion Listing #481543 Listed on: 08/06 ...
    Commercial Casework & Fixtures Estimator - On Site Postion : WOODWEB's Job Opportunities Exchange

      ---   Return to Top   ---   View More Results   


    Project Gallery Results:

    An Artists Perspective
    An Artists Perspective Listing #1891 Listed on: 2009-02-24 23:33:59

    A Furniture Quality Bar for Your Home
    A Furniture Quality Bar for Your Home Listing #4754 Listed on: 2016-04-30 16:04:03

    A-Frame Cabin Kitchen
    A-Frame Cabin Kitchen Listing #4260 Listed on: 2013-10-01 18:02:05

    Art Deco Style Bed
    Art Deco Style Bed Listing #1245 Listed on: 2008-04-15 17:09:37

    Murphy Bed Made and Installed
    Murphy Bed Made and Installed Listing #4667 Listed on: 2015-10-12 20:13:38

    Extensive Craftsman remodel...
    Extensive Craftsman remodel... Listing #4792 Listed on: 2016-07-06 11:38:26

    Mixed Media Media Cabinet
    Mixed Media Media Cabinet Listing #2392 Listed on: 2009-11-19 23:51:41

    "Autumn" hand plane
    "Autumn" hand plane Listing #5104 Listed on: 2019-10-08 20:56:38

    Windsor Chairs and Dining Table
    Windsor Chairs and Dining Table Listing #3000 Listed on: 2010-12-05 21:09:09

    Fine Kitchen
    Fine Kitchen Listing #3452 Listed on: 2011-09-28 17:43:57

    Maple Kitchen
    Maple Kitchen Listing #2740 Listed on: 2010-05-18 12:49:54

    Barefoot Guitar Stool
    Barefoot Guitar Stool Listing #4069 Listed on: 2013-02-23 13:06:19

    Laying a Herringbone Floor
    Laying a Herringbone Floor Listing #4168 Listed on: 2013-07-08 08:32:57

    Cherry & Walnut Kitchen
    Cherry & Walnut Kitchen Listing #2454 Listed on: 2009-12-20 01:19:21

    2 of 3 slightly large doors just about finished
    2 of 3 slightly large doors just about finished Listing #3100 Listed on: 2011-01-20 11:51:18

    Pennsylvania Rocker
    Pennsylvania Rocker Listing #4266 Listed on: 2013-10-16 09:57:08

    Two Music Stands
    Two Music Stands Listing #2752 Listed on: 2010-05-24 07:59:24

    Modern Mission Media Cabinet
    Modern Mission Media Cabinet Listing #1768 Listed on: 2009-01-25 22:28:15

    Christ Cathedral Madrone Liturgical Furniture
    Christ Cathedral Madrone Liturgical Furniture Listing #4669 Listed on: 2015-10-13 00:36:51

    Pomelle Sapele Coffee Table
    Pomelle Sapele Coffee Table Listing #163 Listed on: 2005-01-14 06:41:12

    Sewing Center Cabinet
    Sewing Center Cabinet Listing #4514 Listed on: 2015-01-23 00:15:49

    The Alien
    The Alien Listing #3779 Listed on: 2012-03-17 21:58:48

    The Cartes Kitchen
    The Cartes Kitchen Listing #850 Listed on: 2007-09-26 21:47:57

    Custom Kitchen
    Custom Kitchen Listing #4022 Listed on: 2013-01-04 18:18:31

    Winter bathroom
    Winter bathroom Listing #1116 Listed on: 2008-02-14 18:54:52

    Lectern
    Lectern Listing #2121 Listed on: 2009-06-06 18:07:25

    Quater sawn white oak bed
    Quater sawn white oak bed Listing #1054 Listed on: 2008-01-28 11:35:26

    top of table
    top of table Listing #2123 Listed on: 2009-06-07 03:19:03

    sofa for my house cad only
    sofa for my house cad only Listing #147 Listed on: 2004-09-22 00:55:48

    Contemporary 4 Poster Beds
    Contemporary 4 Poster Beds Listing #164 Listed on: 2005-01-19 17:21:04

    Office System
    Office System Listing #421 Listed on: 2006-09-24 01:26:08

    Wood Range Hood
    Wood Range Hood Listing #112 Listed on: 2004-01-28 19:37:10

    Walnut pedestal table
    Walnut pedestal table Listing #177 Listed on: 2005-02-22 07:49:13

    Baby Changing Table
    Baby Changing Table Listing #489 Listed on: 2006-12-18 20:34:21

    Alder Staircase
    Alder Staircase Listing #355 Listed on: 2006-05-27 00:01:05

    custom bookcase with added details
    custom bookcase with added details Listing #1023 Listed on: 2008-01-21 13:27:59

    Something normal
    Something normal Listing #1201 Listed on: 2008-03-18 19:00:08

    Fireplace
    Fireplace Listing #466 Listed on: 2006-12-01 01:32:39

    Lots of Neon
    Lots of Neon Listing #170 Listed on: 2005-02-11 06:08:58

    Cherry Game Table
    Cherry Game Table Listing #1011 Listed on: 2008-01-16 20:18:16

    End Grain-Up Book Matched Cutting Boards
    End Grain-Up Book Matched Cutting Boards Listing #1916 Listed on: 2009-03-04 16:04:04

    2011 Hawaii Villa Project
    2011 Hawaii Villa Project Listing #3808 Listed on: 2012-04-04 05:22:45

    Pictorial Essay
    Pictorial Essay Listing #4704 Listed on: 2016-01-09 05:25:57

    A Bar Inside The Closet
    A Bar Inside The Closet Listing #3791 Listed on: 2012-03-26 17:03:32

    Making a Sunroom (From a Screened-in Porch)
    Making a Sunroom (From a Screened-in Porch) Listing #4410 Listed on: 2014-06-16 09:31:01

    1890 Barn
    1890 Barn Listing #4496 Listed on: 2014-12-07 19:37:29

    Extension Off Kitchen
    Extension Off Kitchen Listing #3692 Listed on: 2012-01-11 15:22:19

    Kitchen Remodel
    Kitchen Remodel Listing #5092 Listed on: 2019-06-27 11:27:56

    A Thoroughly Modern Kitchen
    A Thoroughly Modern Kitchen Listing #3386 Listed on: 2011-07-15 12:32:28

    Best Kitchen Designs
    Best Kitchen Designs Listing #4833 Listed on: 2016-11-19 15:28:35

    Stainless Steel kitchen cabinet drawer fronts
    Stainless Steel kitchen cabinet drawer fronts Listing #4948 Listed on: 2017-10-30 17:36:58

    Small Round Occasional Table
    Small Round Occasional Table Listing #2701 Listed on: 2010-04-15 15:06:14

    Trophy Display Case
    Trophy Display Case Listing #5103 Listed on: 2019-10-03 08:13:31

    Curly Maple Boat Table with Inlay Rose Compass
    Curly Maple Boat Table with Inlay Rose Compass Listing #4200 Listed on: 2013-09-04 07:13:38

    Entertainment Centers/Media Cabinets
    Entertainment Centers/Media Cabinets Listing #3359 Listed on: 2011-06-26 03:24:02

    Ark End Table
    Ark End Table Listing #2380 Listed on: 2009-11-11 11:45:51

    just few projects
    just few projects Listing #4855 Listed on: 2017-02-21 11:49:12

    solid Koa Bible w/stand
    solid Koa Bible w/stand Listing #2591 Listed on: 2010-02-21 21:53:05

    Under Bar Display/Storage Cabinet
    Under Bar Display/Storage Cabinet Listing #4459 Listed on: 2014-09-28 13:42:17

    Bespoke Kitchen and Bathroom Cabinet
    Bespoke Kitchen and Bathroom Cabinet Listing #3244 Listed on: 2011-04-13 08:49:59

      ---   Return to Top   ---   View More Results   


    Shop Gallery Results:

    Modern Woodworking LLC
    Modern Woodworking LLC Listing #1031 Listed on: 2010-03-30 11:57:59

    Boykin Pearce Associates
    Boykin Pearce Associates Listing #1000 Listed on: 2010-02-18 10:59:29

    Wheathills Memory Boxes
    Wheathills Memory Boxes Listing #870 Listed on: 2009-05-01 05:55:10

    Drafting & Design by Mikhail
    Drafting & Design by Mikhail Listing #844 Listed on: 2009-03-20 12:49:38

    Hardwood
    Hardwood Listing #1807 Listed on: 2018-06-06 13:34:24

    Bernhard Woodwork Ltd.
    Bernhard Woodwork Ltd. Listing #1405 Listed on: 2012-10-17 13:58:35

    David Thiessen Woodworker LLC
    David Thiessen Woodworker LLC Listing #1576 Listed on: 2014-11-02 15:50:47

    JH Conklin & Co.
    JH Conklin & Co. Listing #1321 Listed on: 2012-01-23 18:25:26

    Wiggers Custom Furniture Ltd.
    Wiggers Custom Furniture Ltd. Listing #1165 Listed on: 2010-12-27 21:03:59

    Haste Engineering, LLC
    Haste Engineering, LLC Listing #1369 Listed on: 2012-06-24 10:14:16

    Hudson Cabinetmaking, Inc.
    Hudson Cabinetmaking, Inc. Listing #1186 Listed on: 2011-03-05 09:41:04

    Diamond Lake Custom Woodworks
    Diamond Lake Custom Woodworks Listing #1222 Listed on: 2011-05-29 20:51:13

    Custom Interior Products
    Custom Interior Products Listing #961 Listed on: 2009-12-24 11:42:06

      ---   Return to Top   ---   View More Results   


    Shop Built Equipment Gallery Results:

    chainsaw mill multi-tool
    chainsaw mill multi-tool Listing #193 Listed on: 2018-05-11 17:06:40

    Digital Caliper Fixture
    Digital Caliper Fixture Listing #51 Listed on: 2011-08-24 15:58:36

    Shop-Built Articulated Lathe Dust Pickup
    Shop-Built Articulated Lathe Dust Pickup Listing #58 Listed on: 2011-10-05 17:09:22

    Sorting Cart @ doweling station
    Sorting Cart @ doweling station Listing #92 Listed on: 2013-07-19 21:32:04

    Drawer Notcher
    Drawer Notcher Listing #227 Listed on: 2023-05-09 13:16:10

    Homemade headstock lathe
    Homemade headstock lathe Listing #137 Listed on: 2015-02-14 12:53:26

    4-sided moulding spraying support posts
    4-sided moulding spraying support posts Listing #186 Listed on: 2017-11-29 18:10:41

    Shop-made Bandsaw Re-saw Fence
    Shop-made Bandsaw Re-saw Fence Listing #62 Listed on: 2011-10-13 20:41:46

      ---   Return to Top   ---   View More Results   


    Sawmill Gallery Results:

    Bagdad Lumber Sawmill & Kiln
    Bagdad Lumber Sawmill & Kiln Listing #439 Listed on: 2012-08-06 15:45:52

    Raven Farm Sawmill
    Raven Farm Sawmill Listing #312 Listed on: 2010-05-22 08:07:59

    Wood Wise Lumber Sales
    Wood Wise Lumber Sales Listing #221 Listed on: 2009-02-19 00:15:57

    Wisconsin Wood Harvesters
    Wisconsin Wood Harvesters Listing #206 Listed on: 2008-12-01 23:34:52

    Fisher Family Maple Farm & Sawmill
    Fisher Family Maple Farm & Sawmill Listing #587 Listed on: 2019-02-17 22:18:00

    Deep South Cypress & Cedar Creation
    Deep South Cypress & Cedar Creation Listing #396 Listed on: 2011-12-02 06:07:55

    Foxwalk Log and Timber Builders Inc
    Foxwalk Log and Timber Builders Inc Listing #332 Listed on: 2010-12-07 07:55:54

    Far West Forest Products
    Far West Forest Products Listing #448 Listed on: 2012-09-24 17:21:38

    Best Cabinets & Sawyers
    Best Cabinets & Sawyers Listing #70 Listed on: 2008-02-08 22:32:11

      ---   Return to Top   ---   View More Results