• Knowledge Base Search Results: 370
  • Forum Messages Search Results: 2606
  • Machinery Exchange Search Results: 20
  • Classified Ads Exchange Search Results: 2
    • Your search for solid found 13435 documents (of 103702 searched).
    9001-12000 of the 13435 results are displayed below.
      


    Knowledge Base Results:

    Maximizing Lumber from a Log
    Can quartersawing produce as much usable lumber as one company claims? January 29, 2004

    What Does It Take to Start a Business?
    Besides woodworking skill, what characteristics does a person need to start up a wood shop business? The question sets off a long and thoughtful discussion on the Woodweb Business forum. September 4, 2005

    Delivery Vehicle Choices
    A furnituremaker who plans on offering delivery services gets advice from all size about suitable trucks and trailer rigs. September 6, 2007

    Concealing Cleats in Cabinets
    Constructing cases to hide cleats. November 3, 2004

    Building Your Own CNC Controller
    Thoughts on the hardware and software challenges involved in custom-building a controller for an older CNC machine. March 28, 2015

    Is A One Man Shop Wasting Time With CNC
    02/08/2016

    Custom pressure shoes for moulders
    A discussion of home-made and custom-ordered pressure shoes for special profiles. August 12, 2001

    Cutting Sink Holes in Laminate Tops
    Installers trade opinions and experiences on sink cut-out tools and methods. September 25, 2009

    Edgebander Glue Choices and Temperature Settings
    Tips on choosing glue and tweaking the edgebander for good adhesive performance. November 23, 2008

    Adding value to old pallets
    Examples of how woodworkers have recycled pallets and other old wood into new products. June 5, 2002

    Getting a Good Bond with HPL Edgebanding
    Good priming and a warm working temperature are important for good adhesion when applying high pressure laminate edgebanding. May 12, 2013

    Air-Drying Silver Maple
    Basic advice on stacking, stickering, and covering Maple for air drying in winter. October 17, 2012

    Sawstop Stories
    Cabinetmakers discuss the value of a Sawstop table saw, which trips and stops before cutting off your fingers. August 12, 2014

    Cabinet Construction with Half-Inch Plywood
    Using half-inch plywood for all cabinet components (sides, back, shelves, and deck) lends itself to quick and simple cabinet assembly. March 5, 2007

    Crown Moulding Attachment Details
    Methods for mounting crown moulding on frameless and face-frame cabinets (with clear, useful drawings). April 13, 2010

    Cutting Dadoes on a Sliding Table Saw
    Many sliders will accept a dado blade set. You'll have to consider the riving knife when using one for that purpose, though. August 17, 2006

    SawStop Setup
    Tips on adjusting the SawStop cabinet saw's safety brake. May 15, 2011

    Sliding Table Versus Gantry
    Pros discuss which type of CNC equipment is better, units with a sliding table or units with a moving gantry. July 21, 2006

    Good Things to Have on a Sliding Table Saw
    Are independently-powered scoring blades or extra-long length important? January 8, 2007

    How to Spray a Cabinet Door
    Basic advice on spraygun settings and spray patterns for an even, consistent finish on a raised-panel door. May 7, 2007

    Owner's Compensation
    Shop owner describes his business and gets feedback on his numbers.

    Buying at Online Auctions
    Tips on loading and delivery and on checking equipment value when you purchase used woodshop equipment from an online auctioneer. May 4, 2011

    Buying a Sliding Table Saw
    A second-hand, high-quality slider is a good investment. Here are tips on tuning it up and getting the best out of it. February 16, 2012

    Touching Up Paint On Site
    11/12/2014

    Peel and Stick Edgebanding
    Occasional users discuss the pros and cons of peel-and-stick edgebanding. June 23, 2014

    Troubleshooting a Backsplash Gap
    Floor framing shrinkage might cause cabinets to drop, opening a gap between the countertop and backsplash. August 7, 2006

    RPM calculation
    Determining RPM of given size pulley. May 17, 2003

    Dealing with Fine Scratches in Black Lacquer
    Suggestions for effective final buffing of a black finish. March 9, 2008

    Is It Worth It To Order Pre-cut Drawers?
    12/31/2014

    Accurate Panel Rips
    Tips for obtaining clean, accurate results when ripping panels to width. October 13, 2005

    Contour Trimming 3mm Edgebanding
    Advice on rounding over and trimming plastic edgebanding without melting the material. August 31, 2010

    Making Gray Paint Using Tint Concentrates
    A finisher in a hurry gets advice on whipping up a quick batch of gray paint to match the plastic edgebanding he has. October 19, 2014

    Keeping Track of Tools
    Tips and strategies for reducing the common tendency of shop tools to disappear throughout the year. July 12, 2008

    Durabilité du robinier noir pour terrasses extérieures
    Discussion sur l'adéquation du bois de robinier noir à une utilisation en extérieur comme terrasse ou pour des bancs. 6 mai 2009

    Comment limiter les fissures lors du séchage des disques de bois
    Discussion des principes et des techniques de séchage des tranches de bois coupées en travers avec une fissuration limitée. 16 juillet 2009

    Modifications de serrage pour scies à table coulissantes
    Voici une discussion sur les configurations de serrage construites sur place pour le curseur, avec quelques photos instructives. 17 juin 2009

    Fabrication de garnitures de fenêtres cintrées
    Le cintrage à la vapeur est peu pratique ; la stratification de petites bandes en forme d'arche pour le moulage de pièces est la solution idéale. 24 avril 2009

    Selling Services to Builders or Other Shops
    How does a small solo woodworker approach builders or larger shops to get extra work? July 3, 2006

    Grit Selection for a Wide-Belt Sander
    Advice and experience about sandpaper and the sanding sequence. June 29, 2005

    Affûtage de lames de scie circulaire
    La catégorie « Matériel de fabrication de chaises » comprend une grande variété d'outils et de machines, spécialisés et plus généraux. 20 septembre 2008

    Chair Making Equipment
    The category "chair-making equipment" includes a wide variety of specialized and more general tools and machines. September 20, 2008

    Suppression des traces de brûlure du routeur
    Conseils pour obtenir une surface propre lors du fraisage du bois. 9 juin 2007

    Removing Router Burn Marks
    Tips on getting a clean surface when routing wood. June 9, 2007

    Cope and Stick Joinery with a Router
    Tips on door construction using a router table and sled, and an extended discussion about outsourcing doors versus building them in house. June 28, 2007

    Tooling Up to Make Doors
    An extended discussion of the best investment in equipment for a cabinetmaker who wants to start making his own doors. March 26, 2010

    Pricing Example: Bath Vanity
    An emotional, but informative, discussion of cabinet pricing based on one bath vanity example. September 23, 2006

    Baby Steps toward More Efficient Sanding
    A small shop owner considers stepping up to a drum sander or stroke sander, or just investing in more compressor capacity and some pneumatic hand sanders. October 27, 2011

    Are bone-dry biscuits necessary?
    Questions about the dryness and size of biscuits. April 24, 2002

    Switching to Melamine
    A cabinetmaker who usually builds with plywood gets advice on working with melamine. July 5, 2006

    Low-Budget Spray Guns
    Finishers mull over lower-cost spray guns and what they're good for. November 13, 2005

    Should I Joint and Plane My Own Face-Frame Stock?
    It's work to get nice flush joints and consistent dimensions on cabinet face frames. Here's a discussion about whether to surface your own stock or buy pre-planed lumber. January 28, 2009

    Edge Jointing of Ripped Boards on Site
    Here's a long list of suggestions and tips for getting a good clean edge on site-ripped wood. June 12, 2014

    The Fine Points of Scuff Sanding
    "Scuff sanding" to knock down minor imperfections between coats may be done quickest and best by hand. Here, professionals delve into the fine points of how, when, and why to scuff sand finish coats. August 10, 2005

    Are "High-End" Drawer Joints Worth the Trouble?
    Cabinetmakers discuss the processes involved in dovetail joints, box joints, and simpler drawer construction joints. Will customers see value in a "better" drawer joint? February 26, 2007

    Buying CNC Equipment for Woodcarving
    A woodworker gets advice on the pitfalls awaiting the unwary buyer of CNC gear. July 21, 2006

    On-Site Laminate Cutting Tips and Tricks
    Cabinet re-facing work calls for a lot of cut-and-fit laminate work. Here's a long discussion of ways to go about the task. May 6, 2007

    Case Construction Basics
    Advice for a new shop owner on whether to dado the parts for face frame cabinets. February 26, 2007

    Tool Choice for Dadoing Panels — Router, Shaper, or Table Saw?
    Pros describe their preferred methods for running dadoes in cabinet panels. November 20, 2005

    Equipment Issues for Final Door Sanding
    Cross-grain scratches from the wide-belt, then swirl marks from the random-orbit sanders — what's the solution to minimize the final hand-sanding stage? November 26, 2006

    Labor Charge to Hang Doors
    Millwork installers discuss the steps, labor time and cost for installing interior pass-through doors. October 4, 2005

    Buffing Orange Peel Out Of Lacquer
    To remove the orange peel and achieve a high gloss, move up to fine grits in stages. January 14, 2013

    Shop-Built Sliding Table Saw Sled Decisions
    Advice on whether to build a shop-rigged table saw sled, buy a sliding table attachment, or step up to a professional-grade slider. January 19, 2011

    Driving Nails into Hard Timbers
    A woodworker who's repairing old barn timbers gets advice on choosing a heavy-duty pneumatic nailgun. February 16, 2014

    Shopping for a Tracksaw
    Craftsmen discuss their choices in tracksaws. November 14, 2014

    Sander Skittering and Vacuum Suction
    Reported control problems with some sanders may be solvable by adjusting dust collection vacuum settings. July 16, 2008

    Festool Domino XL for Entry Door?
    Craftsmen discuss using Festool's loose tenon tool for building doors. January 23, 2014

    Attaching a Face Frame to a Plywood Built-In On Site
    Tips and tricks for fastening face frames to built-ins without leaving nail holes. September 8, 2008

    Compressor Capacity to Supply a Pressure-Pot Spray-Gun
    Reliable and powerful air supply matters for pressure-pot equipment. Here are tips on sizing up your unit. July 18, 2008

    Spraying Satin Polyurethane with an Entry-Level Gun
    Can a beginner get decent results spraying poly with an "El Cheapo" gun? Pros chime in with advice. May 17, 2005

    Line Boring Equipment on a Budget
    Is there anything short of a line-boring machine that will serve the purpose as an intermediate upgrade?May 15, 2012

    Vertical Panel Saws Versus Sliding Table Saws, Again
    The perennial discussion, with a few new observations. March 3, 2009

    Pneumatic Versus Electric Brad Nailers
    Pros compare notes on air-powered and electric brad nailers. December 14, 2005

    Countersinks and Self-Sinking Screws
    Countersink bit and self-countersinking screw recommendations. April 9, 2008

    Shopping for a Slot Mortiser
    Woodworkers and the slot mortisers they have known. December 8, 2012

    Baltic Birch Plywood Dovetail Tearout Problems
    Dry veneers on plywood are brittle and tear out easily. These tips may improve your results, though. February 20, 2008

    Working With Metal Laminates
    05/20/2012

    Portable Bandsaw
    Pros discuss options for detail cuts on heavy timbers. May 4, 2005

    Final Sanding on a Fly-Speck Finish
    The last licks with 320-grit paper can make all the difference. January 9, 2007

    One-Speed Versus Variable-Speed Random Orbit Sander
    A discussion of random-orbit sander characteristics. October 25, 2006

    Making Box Beams Look Hand-Hewed
    It's hard to duplicate the look of an authentic hand-hewn beam, but here are some suggestions. August 24, 2005

    Compressor Burnout
    A post about a smoking air compressor kicks of a discussion of quality characteristics of compressors, and whether they can be repaired. March 16, 2015

    CNC-Routing PVC Sheet Material
    Bit choice, speeds, and related issues for routing Sintra and similar materials. February 17, 2006

    Cutting Post-Form Laminate Tops
    If you don't have a slider, you can cut the top from the back side with a circular saw. November 14, 2014

    Repairing a Deep Gouge in Veneer
    Expert advice on filling, patching, and blending for a repair job. November 14, 2009

    Scribing three edges
    Templates, tic sticking and more for efficient scribing in difficult situations. September 20, 2003

    Finger Versus Tablesaw
    A cautionary tale of a seven-stitches encounter with a tablesaw blade sets off a discussion of accidents had and lessons learned. April 25, 2006

    Router Table and Lift
    Designs and ideas for a smoothly functioning router workstation. December 9, 2004

    Drilling a Hole the Length of a Log
    People have actually succeeded at drilling holes in logs the long way. Here, they explain how to do it. December 27, 2006

    Sanding Grit Recommendations
    How fine is too fine between coats, for good adhesion? August 31, 2009

    Financing a Building Purchase
    A woodworker's landlord is selling the property, and the tenant wonders if he can afford to buy it. January 9, 2008

    Stating Dimensions for Crown Moulding
    Crown molding sizes can be looked at two ways: The thickness and width of the board, or the vertical and horizontal distances it will span when installed. Depending on the situation, either could be important. December 2, 2006

    Making Mitered Boxes with MDF
    Here's a long discussion of how to get accurate, clean miter joints with MDF, time after time. September 26, 2009

    Coupe grimpante avec une moulurière
    Un commerçant évalue les avantages et les inconvénients de la coupe en hauteur de cèdre et de séquoia à la moulurière. 28 mai 2006

    Chainsaw Compression Release
    Explanations of the purpose and value of a compression release valve on a chainsaw, and some advice on starting a stubborn saw with less pull-back on the rope. February 22, 2011

    Finitions à la gomme laque et à l'huile de lin
    Un long fil sur les finitions traditionnelles à base d'huile de lin et de gomme laque. 28 mai 2010

    Substrats adaptés au stratifié
    Une discussion sur les matériaux de comptoir compatibles avec le stratifié et pourquoi. 13 juillet 2010

    Détails de la boîte de torsion
    Une conversation sur les idées pour une surface de travail plate en forme de boîte de torsion pour l'atelier. 31 août 2010

    Faut-il coller les panneaux aux montants et aux traverses ?
    La réponse de base est non (ne collez pas les panneaux de porte aux cadres), mais certains points importants ont été soulevés dans cette discussion. 15 novembre 2011

    Choosing a Spray Setup
    Finishers kick around the perennial HVLP versus air-assisted airless question, and exchange detailed thoughts about the pros and cons of different spraygun makes and models. April 19, 2006

    Understanding Vacuum Hold-Down
    When shopping for a vacuum pump for a CNC, it's helpful to know how vacuum works. February 13, 2009

    Répétabilité au niveau du Shaper
    Conseils sur la configuration des façonneuses pour produire systématiquement des moulures identiques à celles d'une série précédente. 16 juin 2010

    Repeatability at the Shaper
    Advice on ways to set up shapers to consistently produce mouldings that are identical to a previous run. June 16, 2010

    Refinishing Old Church Pews
    Thoughts on how to figure out what the original finish is on some church pews, and refinish with a compatible formula. February 13, 2009

    Glazing Advice for a High-Volume Shop
    Pros give tips on formulating glazes, simplifying the process, and pacing the work. March 18, 2005

    Pigmented conversion varnish
    Finishers help troubleshoot problems with drying, overspray and more. January 21, 2002

    Wrinkled lacquer over glaze
    The products and processes that could be causing this problem. August 29, 2001

    Dye Stain Blotching
    A newcomer to spraying dye stains negotiates the learning curve. February 17, 2012

    Glazing and Distressing: Productivity, Quality, and Pricing
    Cabinetmakers and finishers share views on how to estimate and cost out the work involved in distressing and glazing cabinet doors. May 13, 2013

    Oil-Based Stain for a Bookcase
    A professional who has used lots of oil-based Minwax stain describes its characteristics. September 18, 2012

    Installing Rollout Shelves
    Keeping rollouts clear of the hinges. March 14, 2004

    Advice on Conversion Varnish
    A beginner gets tips on product choices, application techniques, and conditioning the workspace. March 18, 2005

    Waterbased Surfacer / Primer Clogging Spray Gun.
    10/07/2014

    Fair Wage for a Color Matching Specialist
    What's fair pay for a worker who's skilled and experienced at formulating a finish to match existing? January 4, 2014

    Using Waterborne Finishes
    How do waterborne finishes measure up, in practical use? September 9, 2004

    Refinishing contamination problem
    Is contamination at fault for the appearance of fisheye when refinishing furniture? August 29, 2001

    Spraying Interior Doors with Oil Based Paint
    Detailed advice from experienced pros about how to spray paint interior doors efficiently and well. December 10, 2008

    Finish Schedule Sample Book — Is There Such a Thing?
    Making a standard set of finish samples for public use would be both time-consuming and unreliable. June 13, 2011

    Toning with conversion varnish
    Adding tonal depth without building up too much finish. August 13, 2002

    Tung Oil for Table Tops
    Tung Oil is not the toughest coating, but it's easy to maintain and repair. July 28, 2008

    Notions de base sur la finition du chêne rouge
    Conseils sur le ponçage, les formules et les horaires pour obtenir de bons résultats avec le chêne rouge. 28 juin 2006

    Sprayer Comparison: AAA Versus HVLP
    Experts discuss the quality, efficiency, and cost issues for air-assisted airless and high-velocity low-pressure technologies. March 18, 2005

    Spraying Dye Stain
    It takes a light touch and a careful eye. In this thread, experienced finishers describe their techniques. October 26, 2005

    Filling grain
    Basic methods for filling grain and finishing. April 9, 2003

    Clear Topcoat for Milk Paint
    A finisher looks for a clear topcoat that he can apply over milk paint on site. October 28, 2009

    Finessing Oak Color Differences
    Ways to tone away the color variations in a batch of oak mouldings. June 8, 2008

    First Time Out with Spray Finish
    A beginner gets advice on spraying pre-catalyzed finishes. March 2, 2006

    Thinning Conversion Varnish in Hot Weather
    A finisher seeks advice on techniques for thinning conversion varnish on days when the weather gets hotter than 90°F. November 29, 2014

    Achieving the Desired Satin Sheen with NC Lacquer
    An inexperienced finisher gets some insight into how to zero in on the satin sheen he wants by applying flatted coats over gloss coats. July 28, 2008

    Paint Finish for Kitchen Cabinets
    Paint can be less forgiving than stain. Here's advice on opaque finishes for cabinets. December 27, 2008

    Filling Pores in Painted Oak Cabinets
    Finishers have suggestions for filling grain and pores before the first coat. But after the paint or coating is on, it's tough. December 6, 2011

    Tinted Conversion Varnish Basics
    Conversion varnish can be tinted white or other colors, but it requires special pigments, so it has to be ordered from a knowledgeable source. January 27, 2008

    Lacquer Thinner Price Versus Quality
    When lacquer thinner prices are rising, buyers look for better bargains. But are the lower-priced options reliable? July 7, 2005

    Resources for conversion varnish
    Learning the fundamentals of finishing with CV. September 2, 2002

    Preventing Blushing of Pre-Cat in Humid Weather
    White haze (blushing) in pre-catalyzed finishes is a common problem in hot, humid weather. Here are tips on preventing it, and correcting it when it does occur. December 9, 2010

    Dye Basics
    Some simple info about how to use dye stains. May 23, 2007

    Problems with Orange Peel in On-Site Lacquer Application
    Thinning, retarding, and modifying the application technique may help an architectural woodwork finisher reduce this top-coat orange-peel problem. January 27, 2007

    Water-based basics
    A primer for folks interested in using water-based stains and topcoats. 1998.

    Applying High Gloss Black Lacquer
    Finishers suggest ways to achieve a glossy black finish on furniture. August 16, 2012

    How Many Coats of Primer?
    Can you get away with using just one coat of primer under conversion varnish, when applying with an air-assisted airless sprayer? December 8, 2006

    Post-cat lacquer vs. conversion varnish
    What is the difference between these two finishes? July 24, 2002

    Spraying Latex Paints
    Finishers trade tips on spraying latex paint. August 14, 2007

    Refinished Kitchen Doors Cracking
    Cracking from wood movement is a common situation, calling for good communication with the customer. June 17, 2009

    Paint Quality Considerations
    Finishers consider their choices for oil-based paint to be brush-applied to cabinets in a historic building. March 29, 2006

    Conversion varnish application advice
    Techniques for applying ML Campbell conversion varnish. March 20, 2001

    Supporting Doors for Spray Finishing
    More tips on how to sit, stand, rack or stack cabinet doors while spraying them. April 21, 2007

    Spraying White Conversion Varnish
    Advice on priming and other quality control measures for spraying white pigmented CV. August 12, 2014

    Waterborne Dye over Oil Stain
    A finisher gets advice on an unusual schedule: applying waterborne dye over a coat of oil-based stain. December 28, 2014

    Dust Control and Conversion Varnish
    Tips on protecting against dust and overspray when spraying CV. March 9, 2010

    Lightfastness of Dye Stains
    Tips here on how to apply a subtle light-blocking pigmented masking coat over dye stain, to prolong the colorfastness in the presence of UV light. July 26, 2010

    Low-VOC Finish Recommendations
    California finishers share their views on finishes that comply with tough West Coast VOC regulations. December 8, 2012

    Gun Setup for 100% Acrylic Paints
    A few simple tips for spraying paint. September 16, 2008

    Repainting Installed Cabinets on Site
    How do you handle painting the cabinet frames on site when you're spraying the doors in the shop? August 27, 2012

    Obscuring Grain and Figure
    Basic advice on finishing wood so that what's underneath doesn't show. June 22, 2012

    Working with Ribbon Mahogany and Brazilian Cherry
    Tips on machining and staining two very hard, and very visually interesting, exotic hardwoods. October 27, 2005

    Spray-Painting Beaded Face Frames
    Suggested techniques for getting good coating coverage inside the narrow recesses of a beaded profile. March 29, 2008

    Pre-cat Over Old Shellac Primer
    02/18/2016

    Couteaux de rabotage affûtés récupérant les copeaux
    Des menuisiers tentent de comprendre pourquoi les copeaux ne s'échappent pas de la pièce après le retour d'un jeu de fers de rabotage de la meuleuse. 14 mars 2006

    CNC Tool Choice to Limit Laminate Chipping
    Lots of CNC users experience chipping problems when machining laminated panels. Here's a discussion. June 28, 2010

    Bords tranchants sur les bandes en PVC
    Les chants coupés peuvent être suffisamment tranchants pour couper les gens, il est donc préférable de limer les bords. 10 novembre 2006

    Sharp Edges on PVC Banding
    Trimmed edge-banding can be sharp enough to cut people, so it's best to file off the edges. November 10, 2006

    Utilisations du bois de mûrier
    Le mûrier est un bois très apprécié pour les tournages, les bibelots et les meubles. 18 avril 2009

    Recoupe des comptoirs installés en place
    Conseils pour couper quelques centimètres d'un plan de travail stratifié, en place. 9 janvier 2006

    Application of PVC Edgebanding
    An edgebander is the method of choice, but here are some alternative suggestions as well. September 5, 2006

    Balancing moulder heads
    A discussion about out-of-balance knives in a moulder/planer. June 13, 2001

    Removing Vinyl Woodgrain Material From Cabinet
    12/18/2012

    Cutting Techniques for PVC Board
    A fabricating shop has problems working with expanded PVC foam board. Colleagues share advice on cutter choice, feed rate, and more. July 11, 2005

    Gel Stain Pros and Cons
    Is gel stain "second cousin to paint?" (And is that bad?) September 26, 2006

    Réparation de mélamine rayée
    Aucune réparation n'est parfaite, mais voici quelques bonnes solutions pour réparer une entaille superficielle dans l'intérieur d'une armoire en mélamine. 23 septembre 2006

    Portes extérieures à feuillures pour coupe-froid à bulbe de compression
    Conseils sur la façon de découper des fentes propres pour les coupe-froids dans les montants de porte. 5 mai 2007

    Rabbeting Exterior Doors for Compression-Bulb Weatherstripping
    Advice on how to cut clean slots for weatherstripping in door jambs. May 5, 2007

    Overcatalyzation Callback Confusion
    Here's a cautionary tale: A cabinetmaker dismisses a customer's legitimate complaint about finish discoloration because he think the customer is hiding something. Turns out, overcatalyzing the finish did cause it to turn orange after many months. Now the cabinetmaker has to apologize and make the jo ......

    Drawer Slide Options
    A discussion of the latest in drawer slide technology. October 25, 2006

    Inset Door Hinge Adjustment and Stops
    A discussion of ways to make inset doors close flush using Euro hinges. January 13, 2008

    Setting Up to Build Cabinet Doors
    Even if you usually outsource, building your own doors in special circumstances can make sense. Here's advice on machinery and tooling for that scenario. June 16, 2014

    Recouvrir une finition mystérieuse
    Nous ne savons pas exactement ce qu'il y a sur cette table, mais il pourrait s'agir de polyuréthane. Peut-on y poser quelque chose en toute sécurité ? Voilà un sujet délicat. 14 octobre 2006

    Cost, Overhead, and Profit: A Pricing Example
    A conversation about how to price a small cabinet job sheds light on different philosophies regarding costs, markups, and the path to a life of contentment. November 15, 2010

    Where Doors and Panels Meet
    How various cabinetmakers deal with the relationsihp between overlay doors and the adjacent edges of finished end panels. January 24, 2005

    Cabinet Door Warping Problems
    Job-site humidity can warp cabinet doors. To reduce problems, some would recommend avoiding Poplar in favor of Maple, or even MDF. October 27, 2011

    Convenience Store Cabinet Materials
    Advice about durable materials for a cabinet in a convenience store. June 4, 2012

    Anchoring Commercial Sink Tops to Drywall
    Quick thoughts on fastening to drywall where there are no mounting blocks within the framing. February 18, 2007

    Setting Yourself Apart from the Crowd
    What makes a cabinetmaker's offerings special for high-end customers? February 12, 2009

    Bandsaw Tire Refurbishing Cost
    New tires for an old bandsaw ain't cheap. May 13, 2005

    Mortised Hinge Alternatives
    Tips and ideas for using non-adjustable hinges with exposed pins for beaded-frame inset-door cabinets. March 1, 2006

    Têtes de rabotage spécialisées
    Les professionnels discutent des options et de leurs préférences. 10 avril 2005

    Copeaux de scie à panneaux en mélamine À l'intérieur du livre
    Les vides entre les pièces empilées pourraient en être la cause. 10 avril 2005

    Self-Countersinking Screws
    The pros and cons of screw-head "knibs." June 22, 2005

    Dark cherry dyes and stains
    How to get a great-looking, deep cherry finish. June 24, 2001

    Mirka Deros Vs. Ceros Random Orbit Sander
    09/25/2015

    How to Prevent Sanding Swirl Marks
    There is more to power sanding than you might think. Here, pros discuss the fine points. December 26, 2006

    How to Make an Oak Mantelpiece Look Old
    Finishers kick around ideas for distressing a new oak mantel to match some old oak furniture (the catch: the finish has to resist heat). December 8, 2006

    Compressor Choices for Pneumatic Sanders
    It takes a lot of air to power air sanders, but many shop owners consider the upgrade worthwhile. Here's extensive advice on compressor choice, with additional tips on setup and operation. September 8, 2007

    Troubleshooting Sand-Through Problems with Dye Finish
    Here's a detailed discussion of sanding materials and techniques, with a view to avoiding the problem of sanding through light finishes while scuff-sanding between coats. October 19, 2014

    Discoloration of Waterborne Finish on Imported Oak Plywood
    A finisher finds that cheap imported plywood reacts badly with waterborne coatings. A barrier coat of shellac seems to prevent this, however. March 28, 2010

    Sanding with Abranet
    Fine points of using Abranet sanding screens. March 28, 2012

    Sawmill recovery rate
    Does one sawmill's recovery rate make it a better choice over another mill? (From WOODWEB's Sawing and Drying Forum) February 18, 2003

    Bandsaw Mill Choices
    Sawmill owners tell what they like about their equipment. August 29, 2006

    Setting Shop Temperature
    A long discussion about how warm (or cool) to keep a shop, whether to turn the heat down at night and over the weekend, and the effect on costs, productivity, and quality of different practices. December 24, 2012

    Adhesives and Glues Compared
    Lots of good background info on traditional glues and modern adhesives in this long thread about gluing an Ipe edge to a countertop. January 20, 2010

    Achieving a "Brushed-On" Cabinet Finish Look
    Finishers and cabinetmakers discuss whether brush marks are a good or bad thing, and how to create or avoid them, depending. October 15, 2009

    Portable bandmill vs. circular mill
    Comparing the efficiency and production capabilities of both types. December 17, 2002

    Gluing face frame joints
    Is the added glue necessary? August 13, 2002

    Processing Trees to Lumber -- for the Hobbyist and Small Business
    Two experts share their secrets of success for small-scale milling operations. January 19, 2002

    Vacuum Veneered Drawer Faces
    Vacuum laminating is ideally suited for creating curved surfaces. May 23, 2006

    A Small Kiln for Final Drying
    A woodworker needs to get his already kiln-dried stock down to lower moisture content to match indoor end-use conditions. Here's detailed advice for equipment choice and drying methods for a small-batch wood-shop drying chamber. May 9, 2007

    Cabinet Refacing Labor Hours
    Making a profit on cabinet refacing depends on being productive on site. Here are some thoughts on the labor time required with various methods. May 28, 2010

    Dehumidifier Kiln Advice
    Detailed conversation about building, equipping, and operating a dehumidifier kiln to dry lumber. September 10, 2007

    How to Limit Cracking when Drying Wood Discs
    A discussion of principles and techniques for drying cross-cut log slices with limited cracking. July 16, 2009

    Swing-Blade Mills Versus Bandsaw Mills
    An extended discussion of the capabilities of both portable sawmill types, and some info on how to extend the swing-blade mill to handle super-sized logs. June 27, 2006

    Building a Hydraulic Swingmill
    Sawmillers talk over the fine points and choices involved in building a hydraulic swingmill. March 13, 2009

    Glazing and Toning over Clear Lacquer
    Detailed advice on formulas and application methods that will achieve a dark walnut tone on oak cabinets that already have a coat of clear lacquer. May 17, 2005

    CNC Router Versus Vertical Panel Saw
    Which to invest in? It all depends on the shop's needs and the business plan. January 8, 2007

    Mixing African and Honduras Mahogany
    A long discussion of the woodworking characteristics of various Mahogany types and substitutes, and the practicality of combining different woods in a single door. June 29, 2008

    Dowel Joint Design, Strength, and Precision
    A long discussion on tweaking dowel and hole size to get good alignment and a strong joint. January 19, 2011

    Troubleshooting Bubbles in Spray Polyurethane
    Advice on eliminating bubbles from a poly finish on a veneered table. August 17, 2009

    Accurate Miters
    Tips on achieving good miter joints when working to fine tolerances. October 25, 2006

    Glue Choices for Applying Veneers
    Pros dig into the fine points of glue selection for veneering, compare the qualities of different adhesives, and discuss veneer application techniques. October 1, 2005

    Resharpening Bandsaw Blades
    Arguments for and against sharpening your own bandmill blades versus sending them out to a resharp service. May 11, 2005

    Gluing Ipe Wood for Outdoor Exposures
    Ipe's oily nature is not conducive to strong glue joints, especially when movement stress occurs. Here are some reports of success and failure at gluing Ipe in outdoor situations. December 26, 2007

    Plank Doors with Stave Cores
    Advice on stave-core construction for a plank door. March 26, 2010

    Best sawmill for exotic hardwoods
    Bandmills vs. swing mills for a new operation. September 2, 2002

    Sawmill Log-Dog Hydraulics
    Sawmiller working on a self-built bandmill gets advice on hydraulics for his log dogs. November 25, 2008

    Preventing Cupping on a Wide Maple Table Top
    Another discussion on moisture and wood movement (causes and preventive measures). November 3, 2010

    Free-Standing Spiral Stairs
    A long and winding thread about winding stairs. April 29, 2010

    Upper Cabinet Construction
    Humorous but insightful thread on cabinet joinery. June 16, 2010

    Edging boards
    The most efficient methods. December 17, 2002

    Gluing Face Frames onto Cabinets
    Many cabinetmakers glue and clamp face frames on, with no other fasteners. In this thread, pros discuss options and techniques. October 20, 2005

    Raised Glue Joints on a Wood Countertop
    Detailed analysis of why glue joints may show up as visible bumps or grooves on a wood surface in a location subject to moisture changes. April 24, 2009

    Working with MDF Trim
    Thoughtful advice, handy tips, and whines about installing medium density fiberboard architectural trim material. May 6, 2007

    Installing an Island Over a Radiant Slab
    Cab installers ponder how to attach an island cabinet over a heated concrete floor, without puncturing any tubes. January 11, 2008

    Face frame clamping options
    Woodworkers discuss their clamping systems and share pictures of what works for them. July 24, 2001

    Balancing Issues when Veneering a Hollow-Core MDF Table
    A table project involving MDF surfaces applied to a hollow torsion box and veneered raises complex questions about how to balance the assembly. October 19, 2013

    Troubleshooting Stain Bleedout
    Pros consider how to deal with a situation where an oil stain dries too slowly and seeps out of the pores of an Oak piece. July 3, 2008

    WOODnetWork Discussions: Glue
    The correct amount of clamping pressure is vital to a strong bond - 1998

    Loose Tenon Joinery for Breadboard Tabletop Ends
    Here's a detailed discussion of breadboard joinery, focusing on whether loose tenons will serve the purpose in a Mesquite table top.March 28, 2012

    Troubleshooting and Repair of Glue Failure in an Exterior Door
    A raised-panel Hickory exterior door behind a glass storm door is coming apart from the effects of solar heat and moisture condensation. What can be learned (or done) in this situation? June 3, 2007

    Finishing Before Assembling — Tips and Tricks
    Cabinetmakers who assemble cabinets after finishing discuss their methods. July 31, 2009

    Cabinet Installation: Preventing Problems
    Careful preparation and knowledge of the site make cabinet installation much easier. February 9, 2001

    Glue Choices for Chairs and Stools
    Furnituremakers discuss which glues they like, and why. April 30, 2006

    Entry Door Ideas for a Jacuzzi Building
    Thoughts on building a durable exterior door able to withstand the steamy environment of a room housing a hot tub. December 14, 2009

    Is It Worth Selling Millwork Online?
    Thoughts and advice (pro and con) about starting a lumber and millwork e-commerce website. November 14, 2014

    Staining Poplar Raised Panel Doors
    Advice on staining poplar raised-panel doors. November 14, 2009

    Sliding Table Saw: Manual or Digital?
    Cabinetmakers consider how to assess the productivity benefits of a digital or computer-controlled slider. November 15, 2010

    Glue for Guitar Neck Joints
    Thoughts on appropriate glues and adhesives for luthier work. April 13, 2010

    How to quartersaw
    Sawyers share details and pictures of their preferred methods. May 17, 2003

    Speeding Up Panel and Door Glue-Ups
    A cabinetmaker gets help puzzling through how best to deploy his clamping wall and his bar clamp table. April 7, 2008

    Laminating MDF
    How to glue up multiple sheets of MDF into a single thick sheet for complex CNC profiling. February 10, 2009

    Wood Sink Finish
    A finisher seeks ways to protect a Teak sink. December 14, 2009

    Sawing to Prevent Tapered Logs
    Making the proper cuts in the right order, to produce flat, quality lumber. May 11, 2005

    Sawing Tapered Logs
    Tips for getting high-value lumber with either portable or fixed equipment. April 10, 2005

    Applying Kuhn edging
    Methods, glues and clamps to use. April 2, 2002

    Sweetgum Character
    If you saw much Sweetgum, you'll find that the lumber has a strong personality. November 27, 2007

    Timber Framing with Yellow Poplar
    Advice on using Poplar or other woods in a timber frame for a house. December 6, 2009

    Cant Hook Versus Peavey
    Useful information on the relative merits and characteristics of these basic logging and sawmilling tools. May 11, 2005

    Red Cedar Grain Patterns
    A craftsman gets advice on sawing techniques for achieving beautiful book-matched grain effects. June 22, 2005

    Informal Testing of Wood Glues
    Woodworkers report impressive results from their own backyard and kitchen endurance tests for commonly used adhesives. August 23, 2006

    Adjustable Height Table Hardware
    Ideas for ways to let a kitchen table be raised and lowered. January 18, 2011

    Bevel-Edge Delamination with MDF
    Troubleshooting an adhesion problem with laminate and MDF: is it the glue, or the substrate? October 12, 2009

    Cutting 5-sided timber
    Hewing a pentagon-shaped ridge beam on a Wood-Mizer. October 9, 2002

    Plywood and Lumber for Boat-Building
    Thoughts on suitable wooden boat construction materials, and where to get them. May 23, 2007

    Drying Half Logs for Benches
    Unfortunately, large logs crack as they dry. It's unavoidable. March 16, 2015

    Drying Spalted Alder
    To halt the growth of spalting fungus, dry quickly and/or heat above 133°F. December 23, 2014

    Salvaging painted heart pine
    Ideas for removing lead paint and nails from heart pine beams. August 12, 2001

    Edging Round Tabletops
    Advice on efficient and effective methods for gluing a 1/8-inch wood edge onto a round tabletop. January 14, 2009

    Bandmill ratings
    Sawmillers share their opinions of various bandmills. April 4, 2001

    Storing Moulder Knives
    Shop owners trade ideas for keeping track of all those moulder knives. December 26, 2006

    Choosing Glue for an RF Edge Gluer
    Selecting suitable adhesives for fast application and curing. May 4, 2005

    Arched Door Jamb Joinery
    Tips on building and installing round-top door jambs. July 25, 2010

    Drying a Large Butcher Block
    There are ways to dry a large one-piece block without checks developing. October 20, 2005

    Strange Stories From the Sawmill -- Part 2
    Interesting artifacts found embedded in sawlogs. September 9, 2004

    Painted Door Details to Minimize Finish Cracking
    A discussion of joint design, glue choices, crack filler, and finish choices in order to reduce cracking and telegraphing of joints. January 28, 2009

    Smooth-tracking sawmill
    Keeping the track rollers on your sawmill running with ease. July 3, 2001

    Planer Choices for Planing Rough-Sawn Lumber
    Pros discuss equipment choices, set-up, and techniques. October 30, 2005

    Table Saw Top Maintenance
    Pros share tips for cleaning and waxing the working surface. June 17, 2005

    A retail lumber business?
    Tips for success in a start-up sawmill-to-retail business. January 16, 2001

    Wood Countertop Construction and Care
    Advice on building and maintaining butcher-block countertops. June 28, 2007

    Antique Lumber: Steam Bend or Laminate?
    Upon consideration, a furnituremaker decides to laminate a curved table apron rather than try to steam and bend historic old wood. October 17, 2012

    Goat Skin Cabinets?
    Yes, goat skin parchment is used to veneer cabinets. Here's how it works. May 13, 2005

    Moisture Content While Gluing Teak
    Advice on adhesive choice, surface prep, and moisture content for gluing Teak. September 7, 2011

    Insert Cutterheads for Finish Planing
    Despite their advantages, spiral insert cutters may not be suitable for finish planing for glue-ups, according to some users. November 13, 2005

    Finding bent bandmill blade teeth
    Locating and fixing teeth that have been pushed "out of set." January 24, 2001

    Shrinkage in MDF Crown Moulding
    Ideas for installing MDF crown so as to minimize shrinkage, and its harmful effects. August 7, 2006

    Resawing Tropical Hardwoods
    Resawing dense hardwoods like Bubinga, Cocobolo and Swartzia requires special care. October 1, 2009

    Glue Choice for Fabricating Stave Core Doors
    Many different glues will work for this relatively simple task. March 18, 2006

    Removing Glue Film from Laminate
    Wiping off glue squeeze-out has dulled the sheen on some laminate tops. Here are suggested remedies. February 25, 2009

    Finish Cracking at Face Frame Joints
    Ways to prevent or correct finish cracking at cabinet joints. July 3, 2008

    Inspecting for Glue Drips Before Finishing
    Drips show up when you wipe with denatured alcohol, but new fluorescent glues and a "black light" work even better. December 2, 2006

    Gluing Dado Joints in Pre-Finished Cabinets
    Lacquer in the dado may inhibit the adhesion of the glue. May 14, 2006

    Gearing Up to Make Tongue and Groove Boards
    What's the best way to equip yourself to machine T&G decking and planking (on a budget)? September 17, 2008

    Speeding up Yellow Glue Setting
    Heat and a clean, sharp joint will help with quick set-up. January 12, 2009

    Glue for a Laminated Plywood Circle
    Woodworkers discuss gluing up a laminated mirror frame of plywood. October 11, 2007

    Lamination Thickness for Curved Door Rails
    Advice on specifying the laminations for gluing up a curved (bow front) door rail. June 16, 2014

    Glue Size Sources
    Looking for a washcoat? You can buy glue size pre-mixed, buy your own, or use something else (like shellac). July 29, 2007

    Sawing Barn Siding
    Quick tips on how to saw board-and-batten siding and beveled lap siding. January 11, 2007

    Outsourcing Shop Drawings
    It's a challenge to obtain drawings out-of-house that satisfy a CNC operation's need for precision and completeness. October 3, 2007

    Sciage et séchage du liquidambar
    Le liquidambar est un bois difficile à travailler en raison de sa tendance à se tordre et à bouger, mais l'effort peut en valoir la peine pour certaines utilisations. 14 février 2010

    Eyewitness: Injury
    Scary stories about careless acts and bad consequences. June 28, 2005

    Pricing a Bathroom Cabinet Job
    Pros share estimating tips and pricing strategies. June 22, 2005

    Témoin oculaire :
    Histoires effrayantes d'actes imprudents et de conséquences néfastes. 28 juin 2005

    Renforcer les étagères à grande portée
    Des experts discutent de solutions pour limiter la déformation des étagères à mi-portée. 18 juin 2005

    Trouver un programme de menuiserie de niveau collégial
    Choix éducatifs face à l'école des coups durs. 18 juin 2005

    Cabinet Hanger Cleats
    Ways to install back-panel cleats for attaching cabinets to walls. June 18, 2005

    Choisir des lames à rainurer et à rainurer
    L'expérience des différentes marques de cutters. 18 juin 2005

    Exterior Wood Finish Maintenance
    This long discussion starts with a question about maintaining the finish on a beautiful outdoor wood gate, and continues into a detailed examination of the difficult durability issues with exterior clear finishes. January 14, 2008

    Making Time in Production Finishing
    Finishers talk about how to organize an efficient, high-volume cabinet finishing operation. May 15, 2008

    NC lacquer for kitchen cabinets
    Why shouldn't this old standby be used? March 23, 2003

    Dangers of On-Site Finishing
    Health and fire risks that accompany improper ventilation. September 20, 2004

    Effective and User-Friendly "Green" Finish Coatings
    For quality and environmental benefits, tung oil is hard to beat. But this thread includes other suggestions, along with some valuable discussion. April 21, 2008

    Stain and Finish Recommendations
    Pros share comments and images about their favorite products. February 8, 2005

    How Not to Finish an Exterior Door
    Sometimes, "finished" is another way to say "all done." February 17, 2014

    When to use waterbornes
    Applications where waterborne coatings will and won't work. May 22, 2002

    Facing a Flush-Panel Steel Garage Door
    A ton of advice on attaching paintable wood faces to an insulated steel garage door, including advice on fasteners, adhesive, and door track hardware. November 2, 2010

    Successfully staining birch
    Methods for achieving a smooth, even finish on birch. September 23, 2003

    Melamine Cabinet Boxes
    Can melamine move in as plywood quality degrades? October 5, 2004

    Clear Finish Over Faux Linen Painted MDF Wall Paneling
    Here's an extended thread on an unusual and challenging architectural finish problem: getting a high-gloss clear coat over painted MDF in a fast-paced custom homebuilding context. June 8, 2008

    Problems with Lacquered Hardwood Plaques Sticking Together
    Finishers discuss why a finished pieces would stick together even after months of drying. June 17, 2009

    Fun with Vinegar-and-Iron Dye Stains
    Iron soaked in vinegar makes an interesting dye that can be black, gray, or brownish-red, depending on the application and use. Here's a discussion of the chemistry and methods involved. July 29, 2007

    Conversion Varnish Wrinkling Problem
    Wrinkles that appear after applying a second coat of CV could be caused by a variety of mis-steps, some related to the "recoat window." October 1, 2010

    Alternating Between Waterborne and Solventborne Finishes
    Advice on running different finish types through the same gun, and comments on the durability of water-based clears in exterior applications. March 9, 2006

    Laminating a Curved Exterior Beam
    Here's a detailed discussion of adhesive selection and clamping methods for a large, curved, laminated beam for an outdoor structure. March 12, 2014

    Exterior door finishes
    Products to use for protection from rain. May 22, 2002

    Objectively Comparing Finish Brands
    When two companies compete for a finisher's business, how should he compare their products? March 12, 2006

    Finish Choices for a Mahogany Exterior Door
    The perennial problem: a clear finish tough enough for outdoor exposure. Bottom line, there's no such thing: sooner or later, the door will need recoating. Here, pros consider the tradeoff between the durability of the initial application and the difficulty of the eventual refinish job. June 28, 200 ......

    Baseball Bat Finishes
    A discussion of good finishes for baseball bats for youth leagues. July 17, 2008

    When Lacquer Goes Bad...
    Finishers explain why a lacquer finish would fail after prolonged exposure to moisture, and suggest how to go about refinishing the affected cabinets. April 18, 2006

    Lacquer Checking in Crotch Mahogany Veneer
    When nitrocellulose lacquer checks on veneered furniture, pros suggest other finishes. March 9, 2008

    Temperature, Surface Prep, and Glue Joint Failure
    Clear, simple answers to a question about glue joint problems. Temperature and surface preparation turn out to be the critical issues. April 4, 2011

    Refinishing a Metal File Cabinet
    How to sand and clean a metal file cabinet, then shoot it with automobile finish. February 8, 2008

    Glue Choice for Oak Exterior Doors
    Epoxy with fiber filler should work well. April 4, 2011

    Wood Floor Over Concrete Cupping Problem
    Wood floors over concrete can be prone to problems. Here's an example. April 4, 2011

    Water-based Polyurethane over an Oil-based Wiping Stain
    Why does the top finish pull away from the stain coat? Pros explain, and suggest solutions. June 28, 2005

    Veneered columns with PVC substrates
    The best procedures and products to get the job done right. June 20, 2001

    Dulling Down a Poly Finish
    It's hard to remove gloss by sanding or polishing. A new topcoat may be the only practical answer. July 3, 2008

    Shellac Under Oil or Varnish
    Finishers discuss compatibility and wear issues with using shellac in combination with Tung oil and varnish. October 13, 2008

    Grain Filling: Old School Versus "High Tech"
    Extended thoughts on new and old ways to fill grain, without creating an artificial "plastic"" look. June 30, 2009

    Latex as Cabinet Finish?
    Some new formulas of latex paint spray almost as easily and hold up almost as well as pigmented varnishes. April 19, 2011

    Mahogany Table-Top Glue-Up
    A discussion of how to avoid problems in a large round table-top slab. March 13, 2007

    Veneering a Bay Window in Place
    Advice on applying veneer to architectural window trim on site. August 22, 2014

    Choosing paint for shelving
    Choosing a paint that will be suitable for bookshelves. April 2, 2002

    Repairing Damage to Laquered Woodwork
    Advice on sanding and touching up some trimwork that has been attacked by drips of some sort of solvent-containing substance. January 18, 2011

    Accentuating the Grain when Finishing Maple
    A light blond shellac applied under a clear waterborne coating will help pop the grain and bring out the character of Maple. May 7, 2007

    Finishing Inside the Drawers of a Fine Walnut Vanity
    Advice on whether to finish the drawer interiors of a period furniture piece, and with what. February 26, 2007

    Waterborne vs. solvent finish
    Professionals tell which they prefer and why. April 11, 2001

    Crossbuck X Braces for a Door
    Alternative methods for constructing a door with x-shaped cross braces. June 4, 2012

    Durable Coating for an MDF Product
    A manufacturer seeks a prime coat that will protect his MDF pieces from dings during handling or shipping. March 29, 2006

    Producing Quarter-Inch Thickness Lumber
    Here are several different approaches to the challenge of producing very thin board lumber. January 17, 2011

    Finishing Oak: Tips for a Beginner
    Advice on finishing a Red Oak gun cabinet, for a newcomer to finishing. October 26, 2011

    Movable Countertop
    02/12/2015

    Blue Stain in Pine
    How big a concern is blue surface stain on softwood? June 12, 2006

    Overhanging Granite Countertop
    You should consult the granite supplier, but here are some support methods that have worked in the past. July 29, 2012

    Clear Finish for a Metal-Inlaid Table Top
    Bar or table tops with metal inlays do well with a clear epoxy finish. Here are some tips on the process. May 24, 2006

    Hanging Finish Lines Versus Horizontal Flow Coaters
    A volume shop considers options for a production finishing line. March 26, 2009

    Achieving a High-Gloss Lacquer Finish
    Many coats and a thorough final buffing are the keys. March 9, 2006

    Finishing Fiberglass And Aluminum
    12/11/2014

    Tung-Oil Floor Finishes
    Thoughts about the characteristics of floor finishes based on or including Tung oil. July 3, 2008

    Coating Formula Terminology
    Quick definitions for "pre-cat," "conversion varnish," et cetera. November 11, 2006

    Spray Toning Furniture
    Advice on achieving good adhesion and maintaining some grain definition when darkening the existing finish on a wood desk. September 3, 2010

    Limitations of Conventional Hot Melt Adhesives and Hot Melt Pressure Sensitive Adhesives
    Hot-melt adhesives are useful and versatile, but they don't resist heat or plasticizers. September 2, 2006

    Evening the color of white oak
    Creating a natural-looking, uniform finish for white oak. January 3, 2001

    Plywood Shelf Deflection
    Thoughts on plywood shelf thickness, ways of reinforcing shelves, and othe ideas. February 26, 2007

    Opaque Finish Telegraphing
    12/04/2015

    Repairing a Table-Top Finish with Bad Fish-Eye
    When it's this bad, you start over. Here's some detailed advice. January 14, 2008

    Exterior Kitchens
    Tips on materials and methods for building outdoor kitchen cabinets. April 8, 2008

    Best stain for cherry?
    Recommendations from visitors on the best processes and products for staining cherry. March 28, 2000

    Options for a Glass-Like Finish
    Finishers suggest products that will supply a deep, high-gloss finish. September 11, 2006

    Target brand finishes
    Making the switch to water-based finishes and finding the appropriate stains to use with them. January 16, 2001

    Finishing naturally oily woods
    How to finish woods with high natural oil contents. 1998.

    Hot-Melt PUR for Door Assembly
    Thoughts on using hot-melt polyurethane adhesive for building doors. November 5, 2007

    The best bar top finish
    What's the best finish for high-use areas like bar tops? March 26, 2000

    High-gloss finish on MDF
    Advice on producing a high-gloss finish on Medium Density Fiberboard. March 20, 2000

    End-grain to end-grain gluing
    Choosing an appropriate adhesive for end-grain to end-grain glueups. January 25, 2001

      ---   Return to Top   ---   View More Results   


    Forum Results:

    Re: Molding/Shaper Knives
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24/23) -- John, I would question any other information that is provided by your "set ...

    Re: For those who really know widebelts
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24/23) -- I agreer mike but it is a machine that was purchased through house of tools. Ca ...

    Re: Laced splice in a replacement sander conveyor belt
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24/23) -- Been using one for years. No problems at all. The belt was end prepped for a cl ...

    Re: For those who really know widebelts
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24/23) -- This is a situation where you should have a replacement on hand. I would purcha ...

    Bridgewood Parts
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24/22) -- I have an opportunity to get a Bridgewood 20" planer, vintage 2002 or some ...

    Is this American Chestnut?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- Hi. I am new to this forum and I have a question. I came across some old 2x6s from ...

    Custom Radius Trim
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- Does anyone have any good contacts for custom radius trim. I have a few profiles w ...

    Re: Custom Radius Trim
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- B.H. Davis should be able to help you, he is on here quite often ...

    insert and moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- I purchased a shaper and with it came quite a few cutters. Some I believer were fr ...

    Re: insert and moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- I would say it depends....if the heads are on the smaller size bushings should be ...

    Best angle for grinding moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- I mould red oak, so I already have the knives set in the 15 degree slots in the cu ...

    Re: insert and moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- Dan On Page Thirty-four of our tooling catalog are the sizes we carry and prices. ...

    Re: Sintex moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- Can you post up a couple of pictures? I've only done belts on my Compact 23 moulde ...

    Re: Gang rip blade configuration
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- David - Yes one can analyze too far and get a bit lost in it. But I think your que ...

    Can a bandsaw replace a table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- for common ripping tasks? I've switched to a slider and got rid of the old cabinet ...

    Re: Can a bandsaw replace a table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- If you want to rip lumber to a rough dimension then a band saw would be the way to ...

    Re: Chatter marks on widebelt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- Patrick, I can help you work out your chatter issues. You can send me pictures of ...

    Re: Can I hard seam a Corian 690 sink?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/24) -- Looks like silicone to me ...

    Re: Stroke Sander: Good for finish sanding?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- Stroke sanders are the least appreciated and the most misunderstood machines. Very ...

    Re: desparately need a resaw solution
    A message posted at WOODWEB's Solid Wood Machining Forum (2/24) -- I support the previous comments and add the following. Appreciate that when cuttin ...

    Highest Strength Glue for Laminating
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/24) -- Hi, I make wooden glasses, they are comprised of wood veneers laminated ...

    Re: Power Feeder Tires advice
    A message posted at WOODWEB's Solid Wood Machining Forum (1/24/24) -- Another vote for Western Roller from me, they were very helpful in getting me w ...

    Re: Insert Planer Knives to Solve Tearout Woes
    A message posted at WOODWEB's Solid Wood Machining Forum (1/24/22) -- More importantly than knowing your planer is 5hp, sharing what the cutting angl ...

    Re: Insert Planer Knives to Solve Tearout Woes
    A message posted at WOODWEB's Solid Wood Machining Forum (1/24/22) -- Good point Keith. My knives are ground to 45deg (after I had them sharpened, I ...

    Re: Insert Planer Knives to Solve Tearout Woes
    A message posted at WOODWEB's Solid Wood Machining Forum (1/24/22) -- Brent, Here is a link to this subject on wood web that covers this better than ...

    Re: Solid wood steps
    A message posted at WOODWEB's Furniture Making Forum (1/24/22) -- You would likely get better responses posting in the architectural forum. Steps are ...

    Re: PLASTIC LAMINATE OVER MELAMINE
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/24) -- Shop around and get bids on laid up panels. Most owners could careless o ...

    Re: Aftermarket 16" insert knives
    A message posted at WOODWEB's Solid Wood Machining Forum (1/24) -- Call Global Tooling in Oregon. They have very good tech reps that can guide you. ...

    Re: S4S machine
    A message posted at WOODWEB's Solid Wood Machining Forum (1/24) -- I had a Weinig Quattromat that was similar to the SCM Sintex. The Quattromat would ...

    S4S machine
    A message posted at WOODWEB's Solid Wood Machining Forum (1/24) -- I think I know the answer to this question but I thought I would ask to be sure. W ...

    Re: custom shaper idea
    A message posted at WOODWEB's Solid Wood Machining Forum (1/24) -- Your idea to convert existing machinery sounds impractical to me for several reaso ...

    1/2 Bullnose Laminate Edge
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/24) -- Hello, Does anyone know of a company that manufactures Laminate tops wit ...

    Re: using a molder as a 2 sided planer
    A message posted at WOODWEB's Solid Wood Machining Forum (12/23/23) -- I use my molder all the time doing just this type of stuff, only out to around ...

    Re: using a molder as a 2 sided planer
    A message posted at WOODWEB's Solid Wood Machining Forum (12/23/23) -- Hi Cris, We have a 12" Ledermac. Depending on the tooling in the outside ...

    Re: Buying a Widebelt - what to check
    A message posted at WOODWEB's Solid Wood Machining Forum (12/23/22) -- Just a couple thoughts from a guy who's owned a few sanders; What about a new ...

    Re: Buying a Widebelt - what to check
    A message posted at WOODWEB's Solid Wood Machining Forum (12/23/22) -- "When we stopped trying to save money and started really focusing on how ...

    Re: Non-Ferrous Euro Hinges
    A message posted at WOODWEB's Architectural Woodworking Forum (12/23) -- I received this in an architect spec book for a project I'm quoting. 2.8 MRI ...

    Merry Christmas
    A message posted at WOODWEB's Solid Wood Machining Forum (12/23) -- Merry Christmas to everyone who Reads the forums post Post questions to this foru ...

    Re: Spindle sander
    A message posted at WOODWEB's Solid Wood Machining Forum (12/23) -- I've been using the grizzly floor model about 3 years with probably 20 hours on i ...

    Re: Stroke Sander: Good for finish sanding?
    A message posted at WOODWEB's Solid Wood Machining Forum (12/23) -- Joshua, I am a big fan of stroke sanders for both heavy removal sanding and finis ...

    Re: Stroke Sander: Good for finish sanding?
    A message posted at WOODWEB's Solid Wood Machining Forum (12/23) -- The stroke sander is a very fine art form. Keeping the contact pad moving is an a ...

    Stroke Sander: Good for finish sanding?
    A message posted at WOODWEB's Solid Wood Machining Forum (12/23) -- I'm thinking of getting a stroke sander. Does anyone use one for full finish sand ...

    Re: Stroke Sander: Good for finish sanding?
    A message posted at WOODWEB's Solid Wood Machining Forum (12/23) -- Thanks joiner. I think I'm going to give it a try. ...

    Re: p-lam edges peeling off
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/23) -- These are the only 2 hot melt pellets we use in our bander. This is wha ...

    Re: 1/4" Corian over plywood
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/23) -- No grey market corian, this is all above board it is at the design of a ...

    Re: p-lam edges peeling off
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/23) -- Only the front edge was banded. As far as the heat, some of the cabinet ...

    Re: p-lam edges peeling off
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/23) -- ok- what kind of glue and what model #. I just had a long talk with the ...

    Re: p-lam edges peeling off
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/23) -- Did the storage unit get hot? I have heard of this in trucks going into ...

    Re: p-lam edges peeling off
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/23) -- Doesn't that seem like the likely cause? ...

    Timesaver Speedsancer gouging wood when tracking
    A message posted at WOODWEB's Solid Wood Machining Forum (11/23/22) -- I bought a 37-inch Timesaver Speedsander fourteen years ago new from the facto ...

    Re: Timesaver Speedsander gouging wood when tracking
    A message posted at WOODWEB's Solid Wood Machining Forum (11/23/22) -- There is only one picture. What I see on the board is the usual back and forth ...

    Re: Timesaver Speedsander gouging wood when tracking
    A message posted at WOODWEB's Solid Wood Machining Forum (11/23/22) -- Thank you for your response. I will try to tighten the hold down rollers. Anot ...

    Re: Timesaver Speedsander gouging wood when tracking
    A message posted at WOODWEB's Solid Wood Machining Forum (11/23/22) -- More photos attached. The sanding pattern isn't normal, but it may look that w ...

    Re: Timesaver Speedsander gouging wood when tracking
    A message posted at WOODWEB's Solid Wood Machining Forum (11/23/22) -- It looks like the the board isn't feeding at a constant speed. ...

    router dust collection
    A message posted at WOODWEB's Solid Wood Machining Forum (11/23) -- I have pretty good dust collection in all areas except some router operations, pa ...

    Re: router dust collection
    A message posted at WOODWEB's Solid Wood Machining Forum (11/23) -- I did way too many drawers with a router and a template. I never really came up w ...

    Mini Max jointer/planer motor problem
    A message posted at WOODWEB's Solid Wood Machining Forum (11/23) -- Hello, Recently, my dad was using my MiniMax FS350 (14" jointer/planer) to e ...

    Re: Does Fastenlink work?
    A message posted at WOODWEB's Cabinetmaking Forum (11/23) -- solidsetup.com, manipulated us into purchasing a software product that would help manufa ...

    Powermatic planer/Byrd helical head
    A message posted at WOODWEB's Solid Wood Machining Forum (11/23) -- Hey all! I got a Powermatic 20" model 208 planer, and I want to replace the ...

    Re: Chain Morticer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/23) -- I have a portable one from Makita - available thru the timber frame tool supply f ...

    Re: Hydrolock moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23/25) -- Each end should have a grease fitting and a pressure relief fitting. Depending ...

    Re: Shaper spindle
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23/23) -- I agree with Bernie. The SCMI machines have two sets of threads, one is very “ ...

    Re: 4 head moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23/21) -- You need to check the maximum swing of each head, what you can cut and find th ...

    4 head moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23/21) -- I know very little about boulders but we bought this one. It came with an addi ...

    Thought Doveails
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23) -- Can your typical dovetail machines be adjusted to run through dovetails besides 1 ...

    Re: Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23) -- I've probably done about 100 baltic birch drawers with my carbide bit so far. I h ...

    Re: Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23) -- There are really only two things I've run into over the years we've been running ...

    Re: Light Duty Shaper Comparisons
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23) -- IMHO not too much. I had a Delta HD and a Powermatic 27 and the PM27 is definitel ...

    Light Duty Shaper Comparisons
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23) -- Looking for a Readers Digest version of the difference between the Rockwell/Delta ...

    Re: Light Duty Shaper Comparisons
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23) -- I wasn't looking to upgrade as much as to add a machine for a specific operation/ ...

    Re: Weinig molders and carbide insert tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23) -- Ok, I will try and answer, but remember it's only my opinion. 1 - Dave would know ...

    Importing .skp into Cabinet Vision
    A message posted at WOODWEB's CAD Forum (10/23) -- Hi guys! I'm having problems importing .skp files into my Cabinet Vision Solid software. I've stud ...

    Re: National Casien 1400LV
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/23) -- Use Forbo PA368, the stuff works great. It is much more consistent from ...

    Miter folding HPL
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/23) -- Good morning. What is the best way to deal with the sharp edge of a mit ...

    Re: dual hook heads
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23) -- I have sold many of these cutter heads over the years, never had any issues. The ...

    dual hook heads
    A message posted at WOODWEB's Solid Wood Machining Forum (10/23) -- anyone have experience good or bad with titan heads. i'm looking at schmidt ,tita ...

    Re: Mystery sheet
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/23) -- It may be Dibond. ...

    Re: Mystery sheet
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/23) -- Alucabond? ...

    Re: Board Calculator
    A message posted at WOODWEB's Solid Wood Machining Forum (9/23/25) -- Not sure what your problem is here. Lumber is sold by the board foot, not squar ...

    Board Calculator
    A message posted at WOODWEB's Solid Wood Machining Forum (9/23/25) -- Where can I get the formulas that allow for board shrinkage? My suppliers seem ...

    Re: Getting Inserts out of helical cutterhead
    A message posted at WOODWEB's Solid Wood Machining Forum (9/23/24) -- A few other things you can try. Put the Torx bit into an impact driver and see ...

    Re: Looking For A Finishing Consult
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/23/24) -- Welcome to the forum! While I'm not in Plano, I recommend checking lo ...

    Re: what is best process (RPM & Feed Rate) to cut Sapele wood
    A message posted at WOODWEB's Solid Wood Machining Forum (9/23/24) -- Bob Hen and Dustin Orth have this right. That profile plus the tounge and Grove ...

    shaper tooling for large stopped mortise
    A message posted at WOODWEB's Solid Wood Machining Forum (9/23/21) -- I need to make what are essentially long mortises in the back of some thick OG ...

    Re: Balanced tooling in insert planer heads
    A message posted at WOODWEB's Solid Wood Machining Forum (9/23) -- Cab Maker Your question has to do with bore tolerance in the cutter head. Every cu ...

    Balanced tooling in insert planer heads
    A message posted at WOODWEB's Solid Wood Machining Forum (9/23) -- Several years ago someone on the forum explained a principle related to tooling in ...

    Re: Loss of a good man Chuck Rankin
    A message posted at WOODWEB's Solid Wood Machining Forum (9/23) -- This is very sad news to hear. Chuck was always one of my favorite people to talk ...

    Re: Balanced tooling in insert planer heads
    A message posted at WOODWEB's Solid Wood Machining Forum (9/23) -- Cab Maker I have an error in the number above it should read +5 to +20 microns not ...

    Re: Using auto feeder on jointer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/23) -- One of the best things I ever did. I used a 4 roll and kept only the las ...

    Re: Planer rolls
    A message posted at WOODWEB's Solid Wood Machining Forum (9/23) -- Already made contact with woodtechtooling and have shipped to them.Thanks for the ...

    Re: Planer rolls
    A message posted at WOODWEB's Solid Wood Machining Forum (9/23) -- Try Western Roller as well. ...

    Weird moulder/dust collection SAFETY question
    A message posted at WOODWEB's Solid Wood Machining Forum (8/23/24) -- So I've been running a Kentwood moulder/knife grinder setup for a couple of yea ...

    Re: Weird moulder/dust collection SAFETY question
    A message posted at WOODWEB's Solid Wood Machining Forum (8/23/24) -- I can't answer your question as to why you need to shut off the dust collection ...

    Re: sharpening moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (8/23/23) -- I have gotten some great advice from my saw and tool shop Vexor. I am now grind ...

    Re: Corian
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/23/23) -- I have the same issue and the stuff weighs a ton so when you get a ro ...

    Re: Corrugated Shaper Head
    A message posted at WOODWEB's Solid Wood Machining Forum (8/23) -- They have all kinds. 12 degree on their dual angle heads15 degree on standard moul ...

    Re: Corrugated Shaper Head
    A message posted at WOODWEB's Solid Wood Machining Forum (8/23) -- Page 28 - 29 of the below link, There is much to look at and choose from. Prices a ...

    Re: Implementing Top Solid
    A message posted at WOODWEB's CAD Forum (8/23) -- Be aware that if you purchased it "some time ago" and havent kept up on your annual suppo ...

    Re: Implementing Top Solid
    A message posted at WOODWEB's CAD Forum (8/23) -- Thanks Derek, We have only a nominal fee to bring it up to date and that is being handled. Are you ...

    Re: Implementing Top Solid
    A message posted at WOODWEB's CAD Forum (8/23) -- It seems you got a better deal than I did. No, I am not using the program. ...

    Re: Milling teak
    A message posted at WOODWEB's Solid Wood Machining Forum (8/23) -- Thank you 👍 ...

    planer snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (8/23) -- I recently had trouble trying to plane a block of maple on my 12" Makita plan ...

    Re: planer snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (8/23) -- Probably due to the short length and perhaps lack of proper feed technique. Did yo ...

    laminated birch ply
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/23) -- i would like to use laminated birch ply 3/4 inch thick for top of a furn ...

    Re: Hand Trimmer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/23) -- Thanks, yes I found it at Outwater yesterday and ordered one. ...

    Orma Press Settings for MDF doors
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/23) -- Hi, we have an orma membrane press to press MDF doors with PVC vinyl. We ...

    Re: Problems with Wilsonart Traceless laminate-- very brittle.
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/23) -- We have been machining this material for a couple months. We are using c ...

    Any US Support for Wadkin Shapers?
    A message posted at WOODWEB's Solid Wood Machining Forum (7/23) -- Looking for any support for a "Vintage" ('79) BER 2 shaper. Tried Wood T ...

    Re: CNC/Digital crosscut fence for tenoner
    A message posted at WOODWEB's Solid Wood Machining Forum (7/23) -- Hi Bob, Have you considered cutting to length before tenoning and using a tenon st ...

    Delta 20" Bandsaw Tire Replacement...
    A message posted at WOODWEB's Solid Wood Machining Forum (7/23) -- I kicked my bandsaw on this morning to do a quick cut and the thing jumped, slamme ...

    Re: Handheld Shop Orbital Sanders
    A message posted at WOODWEB's Solid Wood Machining Forum (7/23) -- Ken, The dynabug ii (rectangular) sanders usually have a 3/32" orbit (not ran ...

    Ritter Assembly Table Clamp REPAIR/REPLACE
    A message posted at WOODWEB's Solid Wood Machining Forum (7/23) -- Anyone know where to go to get seal kits or replacement single action clamping cyl ...

    Re: Laminating for panels and cabinet doors
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/23) -- It also think it just seems very wasteful to run the same operation twic ...

    Re: Corian
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/23/25) -- Thanks just thought I'd try it it is more work routing go back to old ...

    Re: Carbide Insert Breaking
    A message posted at WOODWEB's Solid Wood Machining Forum (6/23/23) -- Another item to look at. If the head has a broke tip, you don't notice and you ...

    Re: Carbide Insert Breaking
    A message posted at WOODWEB's Solid Wood Machining Forum (6/23/23) -- Thanks for the responses. I found an old set from a different batch and put tho ...

    Re: 16"/20" 4 post import planers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/23) -- I agree with David also. I bought a 24” SCM with a spiral carbide insert head used ...

    Re: Telegraphing through HPL
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/23) -- WA 730 should have a smooth pebble pattern. WA 730 should never have a & ...

    Scmi 16n sliding table saw major moving issues
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- We just bought an scmi 16n sliding table saw used and are currently transporting i ...

    Re: Scmi 16n sliding table saw major moving issues
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- Buy some 1/4" steel cable and u-clamps instead of fabric strapping? C-clamp 2 ...

    Re: Scmi 16n sliding table saw major moving issues
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- Use wood shims between the slider and the races at each end. If wood shims aren't ...

    Re: Grizzly 18-36 Drum SDander
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- I agree with rich that you should not expect to get perfect - even good - results ...

    Re: threaded shank brad point bits
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- Depending on what size you want I just got some from E-Bay, Bought dowels to match ...

    Re: threaded shank brad point bits
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- The threaded shank drills are very hard to find since Morris Wood and FCT Closed. ...

    Re: Hardwood Ply Tariffs=%20Discontinued UV Coated Birch
    A message posted at WOODWEB's Business and Management Forum (5/23) -- What should be owned is that every domestic plywood I have found when measuring ...

    Re: Weinig Powermat
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- Russ you article says that 90% of the moulding made today is made with a round cut ...

    Re: Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- They (J&G Machinery) are saying that is not right, and want to send me a new m ...

    Re: Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- They do seem to have excellent customer service! I got the same 4.8 amps per leg. ...

    Re: Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- Did you check the amp draw on each leg of the line voltage? ...

    Re: Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- J&G is a very very good company! ...

    Re: Weinig Powermat
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- Older moulders that use square cutter heads ...

    Re: Sharpening Circular Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- I agree with Dave, send it to a shop to be checked out and put on a machine where ...

    Re: upcut saw blade
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- We don't cut cedar so I can't give you a true testimonial, but we have been using ...

    Re: Solid Surface color variation
    A message posted at WOODWEB's Cabinetmaking Forum (5/23) -- You really cannot warranty any match in years to come even with Granite or Quartz, An Ini ...

    Re: Looking to buy a used Weinig Rondamat 925 Grinder arbor
    A message posted at WOODWEB's Solid Wood Machining Forum (5/23) -- I have what u need I think. 801787-7463 ...

    Re: stained wood edge laminate counter
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/23) -- Thanks a lot on that description Bruce. That really sounds like a great ...

    Re: 50’s 16” Yates American jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (4/23/25) -- I had a Northfield that had that same ability. The infeed and outfeed tables mu ...

    Re: Bandsaw SCM Formula s640p Blade guides question
    A message posted at WOODWEB's Solid Wood Machining Forum (4/23/24) -- I have an older SCM/Minimax S600P manufactured by Centauro with the same Lenox ...

    Re: SCMI MiniMax WIN CS63 Bed Adjustment
    A message posted at WOODWEB's Solid Wood Machining Forum (4/23/24) -- The Kipp lever and clamp that you have to remove to change a belt is adjustable ...

    Re: SCMI MiniMax WIN CS63 Bed Adjustment
    A message posted at WOODWEB's Solid Wood Machining Forum (4/23/24) -- Thanks, friends. Your input is very useful. Going to take a day or two when the ...

    How is hand scraped flooring made commercially?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/23/22) -- Sorry, This is a question more out of simple interest more that anything. I, no ...

    Re: How is hand scraped flooring made commercially?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/23/22) -- The machines I've seen that do this kind of work are similar to a molder except ...

    Re: weinig end snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (4/23) -- Sounds like the feed system is trying to force the material away from the inside f ...

    Re: Router Jig
    A message posted at WOODWEB's Solid Wood Machining Forum (4/23) -- Christopher Kearney: I agree with both Keith and Rich. You probably need a 5/8&quo ...

    Re: Help with running harlan laminator
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/23) -- Review you glue settings. Too much glue can cause excessive wrinkling fr ...

    Re: Thicknessing glue-ups: planer vs. wide-belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (4/23) -- Btw, I used a conservative estimate at $500 for 40 weeks/year. If you plug your nu ...

    Re: Solid Panel Cabinet Doors
    A message posted at WOODWEB's Furniture Making Forum (4/23) -- If it's a clear coat only then I'll put one coat of finish on the panel before I assem ...

    Re: reception desk -solid walnut details
    A message posted at WOODWEB's Architectural Woodworking Forum (4/23) -- Rich thanks for your input. The MC of the building building will be fine. Its ...

    Re: reception desk -solid walnut details
    A message posted at WOODWEB's Architectural Woodworking Forum (4/23) -- Rob and others thank you. I do buy occasionally from certainly wood. Great pp ...

    Re: reception desk -solid walnut details
    A message posted at WOODWEB's Architectural Woodworking Forum (4/23) -- Having flattened slabs like that a few times with a router sled on parallel b ...

    Re: reception desk -solid walnut details
    A message posted at WOODWEB's Architectural Woodworking Forum (4/23) -- Jake I forgot to mention you can get the veneers you need here: https://www.c ...

    Re: Who makes very good, High Quality chisels
    A message posted at WOODWEB's Solid Wood Machining Forum (4/23) -- I second the tasai damaskis chisel bought the 30 mm paring chisel paid 500 plus do ...

    Re: reception desk -solid walnut details
    A message posted at WOODWEB's Architectural Woodworking Forum (4/23) -- yes i see now. thanks for looking. will try again. ...

    Re: reception desk -solid walnut details
    A message posted at WOODWEB's Architectural Woodworking Forum (4/23) -- Here is one way to surface a slab..... ...

    Re: reception desk -solid walnut details
    A message posted at WOODWEB's Architectural Woodworking Forum (4/23) -- one last time with image :) ...

    Re: SCMI 24" WIN CS 63 Widebelt Tracking - Pneumatic to Electric Eye Conver
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23/24) -- Hello i have the same machine but i have some electrical issues can you send me ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23/22) -- Chris, Just wanted to add to your question about “entry level” Weinigs. Our sho ...

    Re: Pneumatic tracking on a wide belt sander.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23/22) -- Hi Mark There should be a white ceramic type of material sleeve that goes over ...

    Re: Pneumatic tracking on a wide belt sander.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23/22) -- The machine originally written about had clear plastic limit switch “arms”. Acr ...

    Re: Pneumatic tracking on a wide belt sander.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23/22) -- The machine originally written about had clear plastic limit switch “arms”. Acr ...

    Re: Pneumatic tracking on a wide belt sander.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23/22) -- I don't know anything about a ceramic part. I've attached a pic of the switch, ...

    Re: Multi gang rip saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23/22) -- Tipper, I have a small shop, basically myself and my wife part time. I have a g ...

    Re: Finish planing, helical and quick change knives
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23/22) -- David did Tersa change designing of their tooling? Just curious about what you ...

    Re: Pneumatic tracking on a wide belt sander.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23/22) -- https://powermatic.com/wb-43-sanding-belt-and-accessories scroll down and see L ...

    Re: wide belt sander trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23/22) -- If its an electronic eye, place a piece of scotch tape over the eye. That has w ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23) -- David, Your 2nd explanation is much clearer. I’ve got thousands of hours on shaper ...

    Help with running harlan laminator
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/23) -- Need help with heat settings on nip rolls and crome rolls. Double sided ...

    Re: Solid wood letters
    A message posted at WOODWEB's CNC Forum (3/23) -- I'll toss this into the ring also: If your vacuum isn't strong enough to reliably hold small parts ...

    Re: Sunhill shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23) -- Thanks for all the replies, I have located 2 spindles. Jared if the 2 I've located ...

    Re: Sunhill shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23) -- This is a 1" spindle. I didn't clean it up. Bottom diameter at the tip of the ...

    Re: Leadermac moulder operation
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23) -- Hi Seth, I am with technical support @ Leadermac. If you remove the last bed plate ...

    Re: Leadermac moulder operation
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23) -- Seth, I did not see the thread where you said you looked for the shim. Give me a c ...

    Re: Counter Profile Shoe - 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23) -- Hey Scott! You shouldn't really need one unless there's minimal contact with the m ...

    Rough Cut Plastic Laminate on CNC
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/23) -- Do any of you rough cut plastic laminate pieces on CNC? I just realized ...

    Re: Counter Profile Shoe - 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23) -- Scott The link below should help describe how to make a custom pressure shoe while ...

    Filing edges on laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/23) -- We are having an internal disagreement on the best way to file the edges ...

    Re: Surfprep sander! We're talking airsanding moulding here, folks.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23) -- I have the small 3x4 SurfPrep and it works wonders for most things! I have the reg ...

    Re: Surfprep sander! We're talking airsanding moulding here, folks.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23) -- Totally. Shop didn't buy it for me, it was a gift, but having used it, I'd buy it ...

    Re: Snipe on New 15" Grizzly Planer???
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23) -- You can determine what is doing what by measuring back from the end of the board t ...

    Re: Snipe on New 15" Grizzly Planer???
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23) -- Spiral head will not help with snipe. Reread BH's post Adjust the rollers. Taking ...

    Re: Snipe on New 15" Grizzly Planer???
    A message posted at WOODWEB's Solid Wood Machining Forum (3/23) -- Try reducing the pressure on the out feed roller. ...

    Re: PL Seams
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/23) -- I never considered doing it that way. It seems to always be at the focus ...

    Re: PL Seams
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/23) -- Overlap the laminate on a jig for splicing laminate, made of MDF. See sk ...

    Re: PL Seams
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/23) -- You are suggesting to assemble the two tops with the drawbolts(one alrea ...

    PL Seams
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/23) -- What is the best way to join plastic laminate countertops? This always s ...

    Re: PL Seams
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/23) -- yes ...

    Re: Weinig Optiut 350 freezing up mid cycle
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23/26) -- That’s a strange one. Since opening the door instantly fixes it, I’d agree it s ...

    Re: Bid asking for warranty info
    A message posted at WOODWEB's Business and Management Forum (2/23/22) -- My warranty is for 1 year, to the original purchaser, non transferable. Some ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23/22) -- With the back scooped out on the bandsaw, that I would screw to the fence body ...

    Re: is this junk?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23/22) -- You simply need to saturate the box with steam. For my first experience with th ...

    Re: Solid wood edge on glass
    A message posted at WOODWEB's Cabinetmaking Forum (2/23/22) -- I dont see issues with wood movement with a small wood applied face to a glass shelf b ...

    Re: Rip fence modification
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23/22) -- I had drawn this up well over ten years ago and finally cut one out about a yea ...

    Re: SS polish
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/23/22) -- Carnauba is famous for water spotting. ...

    Straight line rip saw
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Anyone familiar with a Cantek 303s? ...

    Re: swing-chisel mortiser
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Hi, I am the owner of LUSSAULT, a French company manufacturing swing chisels for a ...

    Re: Balancing cutterhead on 24" jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- If you don't have any luck finding a way to have the head dynamically balanced (I' ...

    Balancing cutterhead on 24" jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- I have a 24" Jonsereds jointer that had unfortunately been severly abused bef ...

    Re: Maka mortiser tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Or contact us : LUSSAULT, swing chisels blades are manufactured in France. We exis ...

    Re: 1/2" Ogee profiled beading/stick
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- This is pretty simple. You have an open ended cutter. Run a wider board then rip t ...

    Re: slot mortiser
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- I have one of these units that I would be willing to sell. Are you still intereste ...

    ARPA laminate issues
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/23) -- We are in the process of building several cabinets using ARPA plastic la ...

    Re: Flat Panels
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Are you a professional woodworker? Do you know how to join wood successfully? You ...

    Re: New planer & jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- I have a General 24" planer which I like. It has powered top and bottom rolle ...

    Sintex moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- I have an SCMI Sintex moulder and the drive belts are starting to fray. I am looki ...

    Re: Gang rip blade configuration
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- The thing that threw me is that the first supplier mentioned was recommended by We ...

    Gang rip blade configuration
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- We have a Raimann gang rip with the Quick Fix arbor. The saw came with 300mm x 28 ...

    Bought a CMT 792 dial indicator
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- I bought this dial indicator, but the problem is, I never replaced my blades in al ...

    Re: Gang rip blade configuration
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- If I were the cynical sort, I'd say the more teeth, the more it costs to service t ...

    Re: extra height on a Weinig
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- On many of the older Weinigs(as well as other makes) a longer shaft in the gearbox ...

    Re: A Suggestion For The Woodweb
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Woodweb Thanks for implementing some of the posters ideas, glad to see you actuall ...

    Re: Can I hard seam a Corian 690 sink?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/23) -- Havent done that one but I suspect that you should silicone it. Check wi ...

    Re: High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Great questions, its nice to see you doing your homework before your purchase. Let ...

    Re: High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Your estimated numbers for our current case is correct Russ. I am also aware that ...

    Re: High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Thanks a lot for the help Russ. I think we'd better choose moulder with jointed po ...

    Re: High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- The choice of Power lock or Hydro lock is ultimately yours, my effort here is only ...

    Re: High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- In my opinion I would stay with the regular feed rollers, they would give you a su ...

    Re: High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Russ, do you have any experience with "Weinig Spiral Insert Hydo Heads" ...

    Re: High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/23) -- Yes I have experience with that type of tooling, but as stated non jointed not for ...

    Premier Adhesives PB910
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/23) -- Has anyone used this spray on contact cement before? Apparently it is ve ...

    4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23/22) -- We have a sicar 4 head Molder which we just got running. The pics show an odd p ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23/22) -- It also looks like you need to check the side spindles for square, the cut in t ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23/22) -- Oh! Perley, you are correct! I just remembered I reduced the right side cutter ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23/22) -- Looks like not enough feed pressure and the board is stalling intermittently. ...

    Re: 4 head moulder problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23/22) -- It looks like you aren't taking enough material off to remove saw marks. ...

    Aftermarket 16" insert knives
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- We have a 16" felder and the disposable knives are cobalt steel and are curre ...

    Re: festool laminate trimmer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/23) -- Buddy I do not have experience with the trimmer you are asking about. I ...

    Re: tapered staves for cylinder
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- These tapered cylinders will be natural finish, so I can't afford to have any fill ...

    Re: tapered staves for cylinder
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- Could you not process them all on the shaper with a couple of back fences? Straigh ...

    Re: tapered staves for cylinder
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- The key for good joints is flat material. If you cut it with a warp it cuts a curv ...

    Re: tapered staves for cylinder
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- I agree, taper and bevel at the same time. You might want to build a jig. ...

    Re: Breaking edges efficiently and consistently
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- I agree, mostly. Climb cutting is not for the inexperienced. I would opt for a 1/8 ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- Gotcha, the different lengths would make it more difficult. Another way to approach it ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- I also clean edges on my jointer. The bulk work gets done on the big jointer, but I le ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- We all use our machinery in different ways depending on what we produce and what's the ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- Think it through. Don't let the initial cost make you rule it out without consideratio ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- Weinig Quattromat. Period. A fine S4S machine that has a jointer infeed table and fenc ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- I've been very successful over the years with a jointer, been woodworking for over 44 ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- I agree with the other comments as well. Worth considering the cost of sourcing the pa ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- What species are you running? High figured? You do know how to read the grain right? S ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- Hi Rich, Good point but yes I can read the grain and no this isn't highly figured wood ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- I agree with David. Sounds like you are talking face frame stock. We buy it from our m ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- Reread your post, missed the part about stock being too wide for the widebelt. Have yo ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- Hi Pete, Yes I've done that for Face Frames. Seems to work. Some pieces may not be the ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- For large quantities of narrow stock, try stacking them on edge, run a band of tape ac ...

    Re: Squaring up Solid Lumber
    A message posted at WOODWEB's Furniture Making Forum (1/23) -- Another thought on the planer. If you can't slow the feed speed down, you might try ba ...

    Re: custom shaper idea
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- This is a pet project of mine. The justification for it has to do with overall foo ...

    Re: Adequacy of shaper for stacked tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- David, What you are looking for is not terribly complicated to produce. One of the ...

    Re: custom shaper idea
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- No need to re-invent the wheel, there are plenty of old direct drive shapers out t ...

    Re: custom shaper idea
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- A decent quill is a pretty massive thing under any shaper table -12", 14" ...

    custom shaper idea
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- Would like to run an idea by the committee to see if it has merit. What are the pr ...

    Re: Machining Curved Handrail
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- Why is this treated different than an arched molding with a half circle profile? I ...

    Re: custom shaper idea
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- Faced with a similar situation in my previous (and much smaller) shop, my solution ...

    Re: Adequacy of shaper for stacked tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- One of my fantasy set-ups is a shaper with one spindle, two sets of cutters, and o ...

    Re: custom shaper idea
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- What about an electro spindle. The same as used on a CNC. 9 hp, 12 hp, 15 hp. Pric ...

    Re: custom shaper idea
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- Step 1 is getting the spindle to rotate. Step 2 is applying linear motion to the s ...

    Re: Radial Arm Saw for Dado
    A message posted at WOODWEB's Solid Wood Machining Forum (1/23) -- I understand why you would want the dado head over the top of your work piece. If ...

    Re: Abet Laminiti
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/23) -- סובלים & ...

    using a molder as a 2 sided planer
    A message posted at WOODWEB's Solid Wood Machining Forum (12/22/23) -- We are looking to streamline our drawer box side machining process. would a 5 ...

    Re: using a molder as a 2 sided planer
    A message posted at WOODWEB's Solid Wood Machining Forum (12/22/23) -- I've not been in big production shops, but do 5 head machines come with that k ...

    Re: using a molder as a 2 sided planer
    A message posted at WOODWEB's Solid Wood Machining Forum (12/22/23) -- A moulder should give you some straightening ability on the first two heads. N ...

    Re: Buying a Widebelt - what to check
    A message posted at WOODWEB's Solid Wood Machining Forum (12/22/22) -- I brought a veneer press in from Florida to Ottawa. Find a customs broker to p ...

    QS white oak end grain spotted appearance
    A message posted at WOODWEB's Solid Wood Machining Forum (12/22) -- I am wondering if any body knows what causes spotted end grain appearance in QS w ...

    Re: AutoCAD courses, fork in the road
    A message posted at WOODWEB's CAD Forum (12/22) -- Can't hurt to learn AutoCAD, but you're putting the cart before the horse. First you need to deter ...

    Re: p-lam edges peeling off
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/22) -- After a little research I have found that laminate can "move" ...

    Re: p-lam edges peeling off
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/22) -- Stupid question- did you band the back of the bookshelf end edges ? Bef ...

    Re: Passage door astragal
    A message posted at WOODWEB's Solid Wood Machining Forum (11/22) -- Thanks for the reply Russell. That is exactly how I'm going to proceed, material ...

    Wood Grain Issue
    A message posted at WOODWEB's Finishing Forum (11/22) -- I have a Solid Rift Cut White Oak appliance panel, that someone has sand smooth.. This is a ...

    Chain Morticer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/22) -- Any opinion on chain morticer? I am thinking of buying one ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (11/22) -- Andrew - I will add that when I had that planer, it worked well once I learned ho ...

    Re: What software to use?
    A message posted at WOODWEB's CAD Forum (11/22) -- Since you are already using Auto Cad, just use it in 3d. In conjunction with Smartlister. Definetl ...

    Old Tokiwa J/P questions
    A message posted at WOODWEB's Solid Wood Machining Forum (10/22/21) -- Looking for some help on this Tokiwa J/P I found on craigslist: https://sfbay. ...

    Re: Old Tokiwa J/P questions
    A message posted at WOODWEB's Solid Wood Machining Forum (10/22/21) -- Thanks Bruce, He stated that he'd like $5000 for it. I thought about offering ...

    Re: Old Tokiwa J/P questions
    A message posted at WOODWEB's Solid Wood Machining Forum (10/22/21) -- Based on what is said in the add I'd guess they will want more than it's worth ...

    Re: Old Tokiwa J/P questions
    A message posted at WOODWEB's Solid Wood Machining Forum (10/22/21) -- Thanks Bruce, I was able to find a Japanese auction/sale board that listed ver ...

    Re: Old Tokiwa J/P questions
    A message posted at WOODWEB's Solid Wood Machining Forum (10/22/21) -- 5K is too much. Your offer seems more than reasonable. If he doesn't bite leav ...

    Re: Weinig molders and carbide insert tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (10/22) -- Thanks for the input. More questions for y'all. We pretty much only do hardwoods ...

    National Casien 1400LV
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/22) -- Has anyone ever used Nat Cas 1400lv in a hot press for laminate to boar ...

    Spindle shaper bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (10/22) -- What type of bearings are used in high quality production machines? I have a POS ...

    Re: Spindle shaper bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (10/22) -- It's not so much the type of bearings as it is the size. Your machine probably us ...

    Re: Spindle shaper bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (10/22) -- Great pictures Jeff! That really puts things into perspective! ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (10/22) -- Does anyone have an idea as to what TopSolid costs? Can't seem to find that info anywhere. ...

    Re: Durable vertical surface
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/22) -- Would acrylic / corian type products be suitable? Pretty hard wearing a ...

    Re: Durable vertical surface
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/22) -- Formica structural laminate. Its on their website. ...

    Re: what is best process (RPM & Feed Rate) to cut Sapele wood
    A message posted at WOODWEB's Solid Wood Machining Forum (9/22/24) -- Find someone with a molder, if what I read is correct, you have 48 pcs to mill. ...

    Re: what is best process (RPM & Feed Rate) to cut Sapele wood
    A message posted at WOODWEB's Solid Wood Machining Forum (9/22/24) -- If this is a large run a molder would be the best choice.. As Tom said, sanding ...

    Free Webinars
    A message posted at WOODWEB's Solid Wood Machining Forum (9/22) -- Join NHLA and the "Wood Doctor" Gene Wengert for a 3-Part Webinar Series ...

    Re: Belt Sander thickness tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (9/22) -- The laminated stock is for rails & stiles of large shutters that we're fabrica ...

    Re: table saw motor slows down
    A message posted at WOODWEB's Solid Wood Machining Forum (9/22) -- After you rule out anything mechanical. Check to see if you have a high resistance ...

    Re: Laminate/Veneer vacuum press?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/22) -- david, can you elaborate on "waxed shower liner" - that sounds ...

    Vinyl Sealer Pricing
    A message posted at WOODWEB's Finishing Forum (9/22) -- Do any of you buy Sherwin-Williams Vinyl Sealer 24% Solids in 5-gallon pails? What do you exp ...

    Re: Last bottom knife - really necessary?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/22) -- Are you running face down and why. If you run face up and stack face to face and b ...

    Re: Using auto feeder on jointer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/22) -- I've never used one. I am concerned about taking out twist with a power ...

    Re: Using auto feeder on jointer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/22) -- If the board were twisted I wouldn't use the feeder. I'd do it by hand. ...

    Re: Using auto feeder on jointer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/22) -- I have one on mine. It works for some things. Flattening one side of rou ...

    Re: Jointer chatter --- bad bearings?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/22) -- We had an older SCMI jointer that ate bearings. We replaced them twice a year unti ...

    3form remnants
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/22) -- Looking for 3form varia ecoresin mirage aquarius twirl.I need 2 pcs. 36& ...

    Using auto feeder on jointer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/22) -- Is it any good to first use an auto feeder on a jointer for rough-sawn p ...

    Re: Beaded Frames
    A message posted at WOODWEB's Solid Wood Machining Forum (8/22/24) -- As I mentioned, I do beaded frames both ways And if you "rip and run" ...

    Re: Composite lumber staples? Non-pneumatic?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/22/24) -- There are nail guns that shoot plastic nails but I've never seen a stapler that ...

    Re: sharpening moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (8/22/23) -- Could your knife be hitting a bit after the edge due to too little back clearan ...

    Re: Toughest/most reliable 12" miter saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/22/22) -- I haven't used the CTD, but I've got 5 12" OMGA saws. Whatever they cost, ...

    Re: Delta table saw parts
    A message posted at WOODWEB's Solid Wood Machining Forum (8/22) -- Can you shim out that gear to let the pinion ride on an unworn spot? Maybe even mi ...

    Corrugated Shaper Head
    A message posted at WOODWEB's Solid Wood Machining Forum (8/22) -- We have a few Schmidt Corrugated shaper heads. I am looking to add a low volume pr ...

    Re: PROFILEMATIC V-1003 V-GROOVE MACHINE
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/22) -- We have a V-1002, I have not worked on the machine but we do have the ba ...

    Re: PROFILEMATIC V-1003 V-GROOVE MACHINE
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/22) -- Tom_ Thank you! If we could start with a copy of your manuals and then p ...

    Re: Hand Trimmer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/22) -- Outwater has them ,bought one last month Cw ...

    Re: Hand Trimmer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/22) -- Thanks Jim, that's it. Appreciate the help. ...

    Re: Stainless steel laminated to baltic birch
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/22) -- In regards to scribing, I agree with the suggestion to scribe the substr ...

    Re: Stainless steel laminated to baltic birch
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/22) -- It would probably cost less to skip the lamination, and just have a meta ...

    Weinig Optiut 350 freezing up mid cycle
    A message posted at WOODWEB's Solid Wood Machining Forum (7/22/25) -- Hey everyone, We have been having a strange issue with our Weinig Opticut 350 t ...

    P22N side head removal
    A message posted at WOODWEB's Solid Wood Machining Forum (7/22/22) -- Hi Just seeing can anyone let me know how to get the housing out of the left si ...

    Lionsgrip glue
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/22) -- Anyone had experience using Richelieu's Lionsgrip spray canister contact ...

    Re: Reducing Power Feed Speed
    A message posted at WOODWEB's Solid Wood Machining Forum (7/22) -- Typically feeders have plenty off speeds, the gears are usually reversible to slow ...

    Re: Lionsgrip glue
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/22) -- WE have used Wilsonart canisters for 15+ years with no issues. Have no e ...

    Re: Larick profile sanders
    A message posted at WOODWEB's Solid Wood Machining Forum (7/22) -- Try Us. The Larick solution works well for very simple, soft, shapes. Profiles wit ...

    Re: Which 26"-32" Thickness Planer for various kind of woods
    A message posted at WOODWEB's Solid Wood Machining Forum (7/22) -- None of my business, but why is he planing lumber at the source? Generally, logs a ...

    Re: cutter for a derda carval dovetailer
    A message posted at WOODWEB's Solid Wood Machining Forum (7/22) -- Does anybody have a source for the threaded dovetail bit that fits a deeds dovetai ...

    Re: Avonite gloss finish
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/22) -- Posted on your other thread as well but we sand down to 3000 with a 3M p ...

    Re: Contact Roller for Wide Belt
    A message posted at WOODWEB's Solid Wood Machining Forum (7/22) -- Fred: You can try www.feedrollers.com. Recovering of your existing rollers and new ...

    Re: Contact Roller for Wide Belt
    A message posted at WOODWEB's Solid Wood Machining Forum (7/22) -- R P Fletcher Machine Lexington NC. Exactly same material and hardness as your orig ...

    Re: adhesive of sanding conveyor belt
    A message posted at WOODWEB's Solid Wood Machining Forum (7/22) -- McLeod Belting Co High Point NC ...

    Re: Plunge/Other Router Inaccuracies?
    A message posted at WOODWEB's Solid Wood Machining Forum (6/22/24) -- Hi Mitch. Sorry, but I've been away. One difficulty from this end is that we're ...

    Re: Carbide Insert Breaking
    A message posted at WOODWEB's Solid Wood Machining Forum (6/22/23) -- Cleanliness is paramount when you install inserts. About any kind of dust under ...

    Re: Powermatic Model 100 Planer/segmented roller
    A message posted at WOODWEB's Solid Wood Machining Forum (6/22) -- I can't say with 100% certainty but I think I recall looking into this many years ...

    Re: Powermatic Model 100 Planer/segmented roller
    A message posted at WOODWEB's Solid Wood Machining Forum (6/22) -- Find Bill Kerfoot at csmachinery@zoominternet.net. He knows the machines well and ...

    Re: 16"/20" 4 post import planers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/22) -- No experience with them. But whatever price you are looking at today, add 25% for ...

    Re: Exterior Door Panel Longevity
    A message posted at WOODWEB's Architectural Woodworking Forum (6/22) -- I did a bit of testing and found that Extira has about twice the movement wit ...

    Re: Shop Fox knife standards
    A message posted at WOODWEB's Solid Wood Machining Forum (6/22) -- Thanks Mr. Davis, that is exactly right. The deepest part of the profile is 1.4380 ...

    Re: Shop Fox knife standards
    A message posted at WOODWEB's Solid Wood Machining Forum (6/22) -- The rare instance that we have had this problem we used button head cap screws in ...

    Re: Shop Fox knife standards
    A message posted at WOODWEB's Solid Wood Machining Forum (6/22) -- If the contact point is the point on the hex, you can use the socket head bolts as ...

    Re: Shop Fox knife standards
    A message posted at WOODWEB's Solid Wood Machining Forum (6/22) -- An alternative to leaving out a bolt is to grind down the offending bolt head so i ...

    Moulding Mahogany
    A message posted at WOODWEB's Solid Wood Machining Forum (5/22/24) -- I've got an order for mahogany to go through our moulder and am looking for som ...

    Re: Moulding Mahogany
    A message posted at WOODWEB's Solid Wood Machining Forum (5/22/24) -- I usually use 12 degree and sharpen fairly often. Some mahogany is going to fuz ...

    Re: Shaper w/ tenon tooling vs Single End Tenoner
    A message posted at WOODWEB's Solid Wood Machining Forum (5/22/23) -- Hi Dave thanks for your thoughts. The intergrated t130 table is pretty stout fo ...

    Re: Shaper w/ tenon tooling vs Single End Tenoner
    A message posted at WOODWEB's Solid Wood Machining Forum (5/22/23) -- We are using tenon and cope discs at about 8” diameter for max tenon length of ...

    Re: Shaper w/ tenon tooling vs Single End Tenoner
    A message posted at WOODWEB's Solid Wood Machining Forum (5/22/23) -- A tenoner has several advantages. It will have a heavier table to carry the par ...

    Re: grizzly shaper trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (5/22/22) -- Double check that the power feed wheels are tight and running true, also don't ...

    Re: Cantek EM-12 Endmatcher
    A message posted at WOODWEB's Solid Wood Machining Forum (5/22) -- try checking the plastic ware rails at the front and rear of the hold down on the ...

    Re: Solid 2012 R1
    A message posted at WOODWEB's CAD Forum (5/22) -- just got message,,,,,will post some same nc code in a few,,,,,, ...

    Re: Solid 2012 R1
    A message posted at WOODWEB's CAD Forum (5/22) -- Hello Chevy can you please help with a post processor. ...

    CV 8 and Windows 10
    A message posted at WOODWEB's CAD Forum (5/22) -- Hello all. I've recently got a new computer that I would like to run Solid 8 Advanced, Windows 10, ...

    Re: CV 8 and Windows 10
    A message posted at WOODWEB's CAD Forum (5/22) -- Solid and widows 10 does not play well with AMD Video cards. AMD has been very slow to do anything ...

    Re: Laminate edge
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/22) -- Decorative high-pressure laminates are usually used for furniture tops e ...

    Re: Compact Laminates
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/22) -- Decorative high-pressure laminates are usually used for furniture tops e ...

    Re: Solid Surface color variation
    A message posted at WOODWEB's Cabinetmaking Forum (5/22) -- Glue cutouts and drop inside cabinets to use a few years down the road as patches. Or you ...

    Re: Solid Surface color variation
    A message posted at WOODWEB's Cabinetmaking Forum (5/22) -- Thanks guys. Besides a single Hi-macs job, I've only ever used Hanex, so I wasn't sure. N ...

    Re: Safest insert cutter heads
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/22) -- Solid wood usually maple or cherry. Some suggestions too for maple. W ...

    Re: Solid Surface color variation
    A message posted at WOODWEB's Cabinetmaking Forum (5/22) -- To some extent it is true of all the brands we have used. We use a lot of Corian brand. T ...

    Re: Solid Surface color variation
    A message posted at WOODWEB's Cabinetmaking Forum (5/22) -- I'm not sure who is making Formica brand now. Used to be made in Tennessee. Your right ab ...

    Re: Solid Surface color variation
    A message posted at WOODWEB's Cabinetmaking Forum (5/22) -- We run the gambit of the manufacturers in our Corian shop. The lots vary from each manufa ...

    Re: Solid Surface color variation
    A message posted at WOODWEB's Cabinetmaking Forum (5/22) -- I have fabricated from Meganite, Polystone, Samsung, Formica SS, and Wilson Art. It's lik ...

    Re: Solid Surface color variation
    A message posted at WOODWEB's Cabinetmaking Forum (5/22) -- It can even be true of laminate. You need to order the same size sheets from the same bat ...

    Re: Shape and Sand tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (5/22) -- We use Arminius http://www.arminius.de/ ...

    Re: Quality differences in corrugated shaper heads
    A message posted at WOODWEB's Solid Wood Machining Forum (5/22) -- Some of the things to look at when selecting any type of corrugated head: All head ...

    Re: Re-Saw blade wondering
    A message posted at WOODWEB's Solid Wood Machining Forum (5/22) -- Blade is a brand new 1-1/4" Lennox "Re-saw Master" blade tensioned ...

    Re: Quality differences in corrugated shaper heads
    A message posted at WOODWEB's Solid Wood Machining Forum (5/22) -- I own 2 different heads, a corrugated that is ok and a CMT head that runs just the ...

    Re: Formica Brand Laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/22) -- at the wood working show (a few years ago) I mentioned this at the Formi ...

    Re: Seco counters
    A message posted at WOODWEB's Solid Wood Machining Forum (5/22) -- Seco counters are a Asian made version similar to the Siko counter. Mary at MSI ca ...

    Re: Looking to buy a used Weinig Rondamat 925 Grinder arbor
    A message posted at WOODWEB's Solid Wood Machining Forum (5/22) -- Mary at MSI can get you in touch with someone that can get you a good used grindin ...

    Re: stained wood edge laminate counter
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/22) -- I don't do any laminate edged tops, all mine are wood. I put the wood on ...

    Re: stained wood edge laminate counter
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/22) -- Thanks Bruce. That seems to make sense if I want a complete laminate top ...

    Re: Nevamar laminates
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/22) -- I tend to cringe when Nevamar is spec'd for a job... I've always been ab ...

    Nevamar laminates
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/22) -- I don't know if it's just me, but it seems that I cannot trim Nevamar wi ...

    Re: Melamine warping after cutting
    A message posted at WOODWEB's Architectural Woodworking Forum (4/22/25) -- I recut everything. Plywood not as bad but it can do it also. Problem is y ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/22/24) -- Hi Allen. The shaper is actually almost 15 years old but has seen only occasion ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/22/24) -- Hi Ian, I have a sliding table saw that uses that same arraignment for blade ti ...

    Need replacement switch recommendations for Martin T17 tablesaw
    A message posted at WOODWEB's Solid Wood Machining Forum (4/22/23) -- Hi guys, I have a T17 that the controls are faulty. Most components are obsolet ...

    Re: Running curved stock on molder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/22/23) -- On your 2nd pass try taking more off the top. This will relieve more stress on ...

    Re: broken bandsaw blades
    A message posted at WOODWEB's Solid Wood Machining Forum (4/22) -- Tony, If the saw has steel guides you can swap them out for a bearing guide set if ...

    Re: broken bandsaw blades
    A message posted at WOODWEB's Solid Wood Machining Forum (4/22) -- I would aim for a more quality blade and band-saw. ...

    Re: Who makes very good, High Quality chisels
    A message posted at WOODWEB's Solid Wood Machining Forum (4/22) -- I use most exclusively Japanese tools. Hida tool sells a very nice quality chisel ...

    Hot press using pvc foam
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/22) -- We've been using epoxy to glue 1/16" okoume to both sides of 1/2&qu ...

    Re: reception desk -solid walnut details
    A message posted at WOODWEB's Architectural Woodworking Forum (4/22) -- The images didn't show well enough on my computer. Really small. ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22/24) -- Thank you Karl. Light cuts for sure. I've been provisionally looking at the set ...

    Re: Pneumatic tracking on a wide belt sander.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22/22) -- I too am just getting an RB-25 back into service after years of sitting idle, b ...

    Re: Wood Species?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22/22) -- It would also help to know where this is. Different regions favor certain woods ...

    Re: Pneumatic tracking on a wide belt sander.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22/22) -- Mark, do you have the ceramic part of the limit switch? These are awesome littl ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- Adam, maybe I wasn't clear in my description. It's not the thread on the screw tha ...

    Repairing urethane feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- The cost to repair a set of feed rollers on a wide belt sander was nearly $800. Ha ...

    Re: Vintage Machinery
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- Hello Brad, There exists a very strong market for old wood working machines. I hav ...

    Re: CAD / CAM Question
    A message posted at WOODWEB's CNC Forum (3/22) -- Tom, From my perspective and my own opinion I found Alphacam pretty intuitive and easy to learn. Th ...

    Re: Sunhill shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- Sean I have the same shaper, and I have a 1" spindle for it that I don't use. ...

    Re: Sunhill shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- Hey Jared, if you have a sec would you post a picture of that spindle? I'm interes ...

    Re: Repairing urethane feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- what is the URL where you got your material? ...

    Re: Repairing urethane feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- Posted below ...

    Re: Straight line Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- for 30+ years we have been producing a glue joint on Diehl SL-52 saws- a very good ...

    Re: Tall oversized raised panels
    A message posted at WOODWEB's Cabinetmaking Forum (3/22) -- Hi Leo, thanks for the image. Yes, I was initially thinking of making them exactly that w ...

    Re: Grinding to Axial Constant System for 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- YESSSS! Thanks Rob. Your drawing was perfect to bring clarity. Now that I see your ...

    Counter Profile Shoe - 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- 1. How often should I use a "counter profile shoe" on the back end of my ...

    Re: Grinding to Axial Constant System for 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- another question - IN GENERAL is it better with a profile like I've sketched it ab ...

    Re: Grinding to Axial Constant System for 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- Yeh When Rob and I work together we make a pretty great team :) ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- Okay, last one. A former boss, one of the worst I ever encountered, was often comp ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- wait a sec---not sure i get it---why was it so ignitable? Are you saying he stuck ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- I now realize I have too many responses to your question..... Here is one that sho ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- Oh right! Forward feed force would suck you in, indeed. I also got a similar range ...

    Surfprep sander! We're talking airsanding moulding here, folks.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- Holy crap guys, this thing. So I got it as a birthday present, and though I recogn ...

    Re: Surfprep sander! We're talking airsanding moulding here, folks.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- SurfPrep 3″ x 4″ Orbital Sander https://mcfaddens.com/p-10412- ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- Woah!!! Now that is completely nuts... I'm putting that one up for the big ribbon ...

    Re: Surfprep sander! We're talking airsanding moulding here, folks.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- I got sick a few weeks ago and work fell behind. I ordered a dynabug while I was d ...

    Re: Surfprep sander! We're talking airsanding moulding here, folks.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- What tool/product are you talking about specifically? We use foam backed hand sand ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- HAH! Golden :) ...

    Re: Snipe on New 15" Grizzly Planer???
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- Thanks for the info folks. After having the machine in place now for a few days an ...

    Re: Snipe on New 15" Grizzly Planer???
    A message posted at WOODWEB's Solid Wood Machining Forum (3/22) -- As mentioned above bed rollers need to be slightly above the bed surface. I take a ...

    Re: Molding/Shaper Knives
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22/23) -- I’m guessing that lower by a “notch” is that you’re talking about a corrugation ...

    Re: Molding/Shaper Knives
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22/23) -- Unless you want to watch your shaper do a dance across the floor, ALWAYS set yo ...

    Re: Molding/Shaper Knives
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22/23) -- One time I was tasked with reproducing some sort of siding that basically had a ...

    Re: Edge Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22/22) -- Yes it is an excellent machine and sands very well. I am about to order a Chine ...

    Re: Edge Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22/22) -- Tipper, Do you have a link to the Chinese machine that you referenced? ...

    Re: Edge Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22/22) -- You don't consider switching to a woodworking CNC router for door edges. ...

    Re: Recent six head moulder purchase
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22) -- When I run a moulder with 2 rights heads I use two different methods of running T& ...

    Re: Recent six head moulder purchase
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22) -- Seems unusual to me, especially on the 2nd, but I am a Weinig guy. Dave would be m ...

    Re: Recent six head moulder purchase
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22) -- Thank you both for your response. My next question, the second right head has the ...

    New planer & jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22) -- Looking at new 24" planer & 20" jointer options. I build furniture a ...

    Buffing SS edges with an edgebander
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/22) -- I have 150 6' x 6" strips of standard SS to bullnose and buff. Can ...

    Laminate supplier
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/22) -- Need an on-line supplier of Formica laminate sheets that doesn't charge ...

    High speed moulder for S4S planing
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22) -- We are currently running 3 Weinig Profimats. To become more efficient and fast, we ...

    Re: Molder for reclaimed T&G
    A message posted at WOODWEB's Solid Wood Machining Forum (2/22) -- Thank you Russ I can see how rubber rollers could be an issue. We run them on our ...

    Re: Power Feeder Tires advice
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22/24) -- Western Roller yellow Just replaced mine after 15 yrs of steady use ...

    Re: Insert Planer Knives to Solve Tearout Woes
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22/22) -- Brent, have you tried Hermance to see what their lead time is? https://www.herm ...

    Re: Sliding table shapers
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- I have the Panhans version of one of these. Martin US now sells the one made by Ho ...

    tapered staves for cylinder
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- Need to produce 52 tapered cylinder table bases of sapele. Base is 18". top 1 ...

    Re: tapered staves for cylinder
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- Why not taper and bevel on the saw at the same time? ...

    Breaking edges efficiently and consistently
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- Hi, I run a relatively new business that makes a combination of custom and standar ...

    Re: Breaking edges efficiently and consistently
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- Pine is generally a pita to work with, I avoid it at all costs... Trying to sand a ...

    Re: imitation band saw finish
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- Try resetting a few teeth on a bandsaw blade. It will give you the repeating groov ...

    Re: Adequacy of shaper for stacked tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- I agree with David, although the Aluminum cutter head would be better on the top i ...

    Machining Curved Handrail
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- We have a 6 head moulder We have a Mikron moulder. We have the ability to make arc ...

    Re: Machining Curved Handrail
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- Jeb What about milling 1/4 of the round at a time like you do when you make a full ...

    Re: Quality differences in corrugated shaper heads
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- We use Titan 12/20 Heads, Can't go wrong with these I may have some older 1-1/4 he ...

    Re: Leitz Riptec
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- If running thru a Moulder, consider climb milling on the side heads. A Heavy Shape ...

    Re: Radial Arm Saw for Dado
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- Ripping and cutting dadoes with a radial arm saw has always been a hazardous propo ...

    Re: Radial Arm Saw for Dado
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- Thanks for your input fellows. We have a shaper setup to run rabbets for the sides ...

    Re: Radial Arm Saw for Dado
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- Panel router is the way to do cross grain dadoes in quantity. You will also elimin ...

    Re: Radial Arm Saw for Dado
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- I agree with Jim - far too dangerous, and not as accurate as you may want. The pre ...

    Re: Radial Arm Saw for Dado
    A message posted at WOODWEB's Solid Wood Machining Forum (1/22) -- Second on the panel router. Best way to accomplish consistent depth without tearou ...

    Re: Stainless steel laminated to baltic birch
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/21) -- Awesome work, the kitchen looks perfect! I am doing a very similar proj ...

    Re: Griggio SC200E, MC0069437, 2003
    A message posted at WOODWEB's Solid Wood Machining Forum (12/21) -- Hello Rick, I do have a number of electronic manuals for this saw on hand. If you ...

    Balancing Glue Volume in Vacuum Press?
    A message posted at WOODWEB's Architectural Woodworking Forum (12/21) -- I work for an architectural millwork company that often laminates custom sol ...

    Re: Flooring with Circle Saw Milling Marks
    A message posted at WOODWEB's Solid Wood Machining Forum (12/21) -- Hi As Bruce mentioned above the "Frankensaw" we built can handle up to ...

    Re: cad moulding drawings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/21) -- White River has a lot of downloadable profiles in their online catalog. ...

    p-lam edges peeling off
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/21) -- Does p-lam move with temperature and humidity changes? We have a bunch ...

    Re: p-lam edges peeling off
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/21) -- Air in the top of storage container got hot. The heat moved down breaki ...

    Re: Hydrolock moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (11/21/25) -- Thank you all for responding. Yall are awesome!! ...

    Re: Thick moldings
    A message posted at WOODWEB's Solid Wood Machining Forum (11/21/22) -- Why in the world is Soft Maple an alternate to Cherry? ...

    Re: Thick moldings
    A message posted at WOODWEB's Solid Wood Machining Forum (11/21/22) -- Availability ...

    Widebelt Sander Help Needed
    A message posted at WOODWEB's Solid Wood Machining Forum (11/21) -- Hi, I've got a 1984 model A.Costa single head widebelt sander. I am having issues ...

    Re: Fixing Laminate seam
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/21) -- It's a bad seam no question however any laminate seam will be visible a ...

    Re: Pro scale / widebelt
    A message posted at WOODWEB's Solid Wood Machining Forum (11/21) -- David is correct. Rezeroing does nothing if your table has any slop or backlash i ...

    Fixing Laminate seam
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/21) -- I was called to a home where a handyman installed a new laminate counte ...

    Re: Fixing Laminate seam
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/21) -- That looks like a post formed top. If it is, you can order post formed ...

    Re: New CNC
    A message posted at WOODWEB's CNC Forum (11/21) -- Great machines - I've owned both a Series 1 and now Series 2 and found them to be excellent functi ...

    Re: Solid Essentials - Is it a good starting point
    A message posted at WOODWEB's CAD Forum (11/21) -- Hi Joe Thanks very much for taking the time for that very informative reply. Much Appreciated. I`l ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (11/21) -- First, use the Delta 3 leg gauge to set your knives in the head. This will put th ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (11/21) -- OK Andrew, I just threw that out there with my planer in mind which is a Rockwell ...

    Hydrolock moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (10/21/25) -- Can someone explain the hydrolock moulder head please. The ones I've seen have ...

    Re: broken bandsaw blades
    A message posted at WOODWEB's Solid Wood Machining Forum (10/21) -- There has got to be a better bandsaw blade to use than what you are using current ...

    Re: Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/21) -- I have the OMEC version. Love it! Only issue I have is getting the small bit of b ...

    Re: Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/21) -- I'm really shocked you have not run into this before. I would assume anytime you ...

    Re: Solid walnut countertop
    A message posted at WOODWEB's Architectural Woodworking Forum (10/21) -- The edge is done with a router and the largest round over and cove bits avai ...

    Re: Weinig molders and carbide insert tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (10/21) -- I would consider custom inserts tools for many profiles. The use of shear in the ...

    Re: Weinig Profimat 23
    A message posted at WOODWEB's Solid Wood Machining Forum (10/21) -- Training will be well worth the investment. Paul does a great job. The investment ...

    Re: Solid walnut countertop
    A message posted at WOODWEB's Architectural Woodworking Forum (10/21) -- Neat looking. Did you hire a piano mover? I like Wenge but always seem to ge ...

    Re: Solid walnut countertop
    A message posted at WOODWEB's Architectural Woodworking Forum (10/21) -- David, How did you put that profile on the edge? It looks beautiful! Hasting ...

    Mystery sheet
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/21) -- I ended up hauling off 15 sheets for some leftover material from a gene ...

    Durable vertical surface
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/21) -- I have to construct a stub wall at a nursing home nurses station. I nee ...

    what is best process (RPM & Feed Rate) to cut Sapele wood
    A message posted at WOODWEB's Solid Wood Machining Forum (9/21/24) -- I have a project that is high quantity and I need some guidance on cutting time ...

    Re: Getting Inserts out of helical cutterhead
    A message posted at WOODWEB's Solid Wood Machining Forum (9/21/24) -- You don’t need to worry about annealing carbide with heat. It maintains the sam ...

    Re: Getting Inserts out of helical cutterhead
    A message posted at WOODWEB's Solid Wood Machining Forum (9/21/24) -- Hello, I had the same problem with a moulder head. The solution I finally came ...

    Re: Belt Sander thickness tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (9/21) -- .5mm is over the maximum that 100 grit can remove in perfect conditions.. 4mm is p ...

    Re: table saw motor slows down
    A message posted at WOODWEB's Solid Wood Machining Forum (9/21) -- Make sure the pulley isn't spinning on the shaft. If set screws were loose enough, ...

    Re: Pre Finished Interior
    A message posted at WOODWEB's Cabinetmaking Forum (9/21) -- Just thought I'd throw this out there as a different angle to consider. We have lots of c ...

    Re: parts for SCMI P170 or P230
    A message posted at WOODWEB's Solid Wood Machining Forum (9/21) -- Parts Pronto is the parts department for SCMI equipment. Google it and you will ge ...

    C.O. Porter 105 Production Shaper/Router
    A message posted at WOODWEB's Solid Wood Machining Forum (9/21) -- Hi- Looking for parts, collet and or nut for my CO Porter 105 Shaper/Router. Or in ...

    Composite lumber staples? Non-pneumatic?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/21/24) -- We're looking for a composite lumber stapler (ie, to staple identification tags ...

    Delta Model 27 Shaper Spindles
    A message posted at WOODWEB's Solid Wood Machining Forum (8/21/24) -- Looking for spindles for Delta model 27 shaper. Prefer 1-1/4" spindle, but ...

    Re: Corian
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/21/23) -- It works really to fill the dumpster with. Difficult to find other th ...

    Re: Delta table saw parts
    A message posted at WOODWEB's Solid Wood Machining Forum (8/21) -- I did find a company that would repair the gear. I was going to fill the void in b ...

    Re: Finger jointing cutter specs
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/21) -- If the gum tree that you are growing is an American species, you're like ...

    Finger jointing cutter specs
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/21) -- Good day all Please assist, we are working with wild growing Gum and Pop ...

    Re: Milling teak
    A message posted at WOODWEB's Solid Wood Machining Forum (8/21) -- I ran tens of thousands of bf of teak a few years back for a large project and fou ...

    Re: Hand Trimmer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/21) -- Checked with Louis & Co, which is now Wurth, and they don't have the ...

    Re: Hand Trimmer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/21) -- Plastiglide sold them for use with their T-band. I got mine from Louis a ...

    Re: Hand Trimmer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/21) -- Looks like tapease.com has it listed at 166.00 ea and replacement blades ...

    Re: Top Solid help
    A message posted at WOODWEB's CAD Forum (8/21) -- This is one of several video's on youtube on making cabinets from scratch with TS http://www.youtub ...

    Re: Beaded Frames
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21/24) -- I apologize for any condescension; I mean no disrespect. I agree milled to fram ...

    CNC/Digital crosscut fence for tenoner
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Hello All, We have an older SAC T3 tenoning machine with the old style bubble indi ...

    Re: CNC/Digital crosscut fence for tenoner
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Have you considered this? ...

    Re: Which 26"-32" Thickness Planer for various kind of woods
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Your math is OK, but that is only one pass thru the machine. If you are going from ...

    Re: Which 26"-32" Thickness Planer for various kind of woods
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Dear experts, Our stock is different from the stock in Europe. Our stock soak in w ...

    Buying 26" Heavy Duty Planer from stranger
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- I received a call from a stranger. Selling Price: USD500/- Cutterhead Knife: 6 pie ...

    Re: Which 26"-32" Thickness Planer for various kind of woods
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- 7 Feet is about 2m. Heavy duty planer can plan around 9m/minutes. That means 1 min ...

    Re: Buying 26" Heavy Duty Planer from stranger
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Then, i find the 100% match photo exactly the same from the internet, but strange ...

    Re: Tersa cutter head
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Are there any updates on this? Did you manage the switch? Looking at doing similar ...

    Re: Buying 26" Heavy Duty Planer from stranger
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Welcome to the Internet my friend ...

    Re: Plam delaminating issues
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/21) -- We have this problem with all substrates. Melamine, MDF, Flake. the glue ...

    Re: Plam delaminating issues
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/21) -- It sounds like your problem is more related to expansion/contraction if ...

    Re: Plam delaminating issues
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/21) -- Hey Walt, I'm curious does this happen on a variety of substrates, or ju ...

    Re: SCM SI400 NOVA
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Hi thank you so much for the info my zip is 11218 ...

    Re: change Scmi moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- First, lets start by stating this should only be done by a qualified factory rep. ...

    Re: changing a Scmi 5 head moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Thanks for the response, where would I be able to get the breakers and wiring diag ...

    adhesive of sanding conveyor belt
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- I have a Time Saver top 30 wide belt sander. The rubber conveyor is separating at ...

    Re: change Scmi moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Like Russ said - You need to find and replace all of the motor overload breakers w ...

    Re: change Scmi moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Consider a buck and boost transformer. I run a 440 volt CNC router from 208 volt 3 ...

    Re: changing a Scmi 5 head moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Adrian, Go for the transformer, much less hassle. Mark ...

    Re: Contact Roller for Wide Belt
    A message posted at WOODWEB's Solid Wood Machining Forum (7/21) -- Western Roller could re-make the roll you already have?... ...

    Re: Corian
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/21/25) -- That does not meet the warranty requirements. Do your customers a fav ...

    Re: Carbide Insert Breaking
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21/23) -- Usually the simple answer is the best. Not to insult you but it the head on bac ...

    Re: Carbide Insert Breaking
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21/23) -- Are there countersunk holes in the insert. I have heard that sometimes the coun ...

    Re: Door sticking on the moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21/22) -- We do mostly S4S for rail/stile stock on a 5-head moulder. As David mentioned, ...

    Re: Motor brake for table router.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21/22) -- upgrade to a shaper? ...

    Powermatic Model 100 Planer/segmented roller
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21) -- Does anybody know if it possible to add a segmented infeed roller to a Model 100 w ...

    16"/20" 4 post import planers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21) -- I'm looking at the 16 & 20" 4- post import planers that Powermatic, jet, ...

    Re: Shop Fox knife standards
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21) -- Assuming the Shop Fox moulder still uses the same square head as their Williams an ...

    Shop Fox knife standards
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21) -- I'm wondering if anyone knows a source for production standards on shop fox moulde ...

    Re: Shop Fox knife standards
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21) -- You have any pictures of knife can you use just one bolt on knife i have one that ...

    Re: taking 2x6x16' to 5/4" x 6 decking on moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21) -- Why not resaw off a bunch of the extra then run on the molder? Seems like that mig ...

    Re: Solid surface market check
    A message posted at WOODWEB's Cabinetmaking Forum (6/21) -- The job did not call for coved splash. They did the original job turnkey so yes they did ...

    Re: Solid surface market check
    A message posted at WOODWEB's Cabinetmaking Forum (6/21) -- I couldn't match $4K. James price is about right but I didn't actually run it through our ...

    Re: taking 2x6x16' to 5/4" x 6 decking on moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (6/21) -- Thanks for the responses! Happy Father's Day!!! ...

    laminated panels
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/21) -- We are looking for a company in the Eastern U.S. that can custom manufac ...

    Geetech 20" planer
    A message posted at WOODWEB's Solid Wood Machining Forum (5/21/23) -- I'm looking at an older geetech planer. the Model and serial numbers are " ...

    Re: 12" table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/21) -- I’m open to new or used. A Wadkin might work. Most older table saws seem to have t ...

    Re: 12" table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/21) -- I have to agree what you are doing is dangerous. Get a resaw bandsaw. It is only a ...

    Re: laminating white oak onto MDF substrate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/21) -- Just rabbet the opposing faces to create shiplap. You can then nail it t ...

    Re: laminating white oak onto MDF substrate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/21) -- Thank you for your response. Any thoughts on how I can accomplish these ...

    Re: laminating white oak onto MDF substrate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/21) -- Much thinner oak ...

    pricing moldings/s4s/flooring
    A message posted at WOODWEB's Solid Wood Machining Forum (5/21) -- Hello Gentleman, I currently manufacture stairs, but looking to add another produc ...

    Re: Re-Saw blade wondering
    A message posted at WOODWEB's Solid Wood Machining Forum (5/21) -- sharpness, blade tension, feed speed. Unsure of what you mean by resaw. The 1" ...

    Re-Saw blade wondering
    A message posted at WOODWEB's Solid Wood Machining Forum (5/21) -- Sometimes during re-sawing my blades seems to fall into a pattern of moving from s ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/21) -- "But this contractor knows I am inexperienced building exterior doors an ...

    Re: stained wood edge laminate counter
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/21) -- I'd install the wood, lay the laminate and finish after. I wouldn't be w ...

    50’s 16” Yates American jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21/25) -- How do I set spring joint lever. Having trouble getting a straight joint. I don ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21/24) -- Thanks Allen. It can I'm sure handle a deeper cut than 4mm, although by how muc ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21/24) -- Atta-a-boy, Ian!!! Your ingenuity paid off and it sounds like you can do it in ...

    Re: Running curved stock on molder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21/23) -- Ok, I see what's going on. Try this, take a wide board and split it, run one of ...

    Re: Ironwood planer reviews
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21/22) -- As I see it, Ironwood is Taiwanese machinery brought into the US, then sold and ...

    Re: Ogam PO-280 multi Rip
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- If the top surface of the chain, where the wood contacts it, is worn to the point ...

    Ogam PO-280 multi Rip
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- Hi all, I have this machine repaired but after couple of weeks of using it went ba ...

    Re: Router Jig
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- Let me be honest. That jig is just about the biggest piece of crap you could buy a ...

    Router Jig
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- I picked up a no name dovetail jig but there is no information about what size bus ...

    Re: Router Jig
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- 5/8 guide bushing should work. As for bit, bring the bit up shallower makes them l ...

    Re: moulding none ripped material
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- Jeff I think this could cause damage to the machinery. You will have to find a hap ...

    moulding none ripped material
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- My company has this idea to buy material that is cut from bolts and resawn to widt ...

    Re: Experienced noob needs molder selection advice
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- The 22N is a good platform. Your challenge is finding one that's not worn to shred ...

    Re: Experienced noob needs molder selection advice
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- Hey Tim! I too would recommend getting a six head machine, definitely a well spent ...

    Re: Jet Cabinet Saw on-going Problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- A few more thoughts on your problem. I'd be inclined to open up all the electrical ...

    Re: Jet Cabinet Saw on-going Problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- One more thing. You mention that after a week a new zero clearance insert is chewe ...

    Re: Who makes very good, High Quality chisels
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- I've been using the same set of Robert Sorby chisels for about 20 years. They take ...

    Re: Who makes very good, High Quality chisels
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- I have used these Buck bros bench chisels for 18 plus years http://www.craftsmanst ...

    Re: Jet Cabinet Saw on-going Problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- Good idea BH, I'll check the connections for that. Since it's on a dedicated 220 c ...

    Re: Jet Cabinet Saw on-going Problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- You may also want to make sure there are no anomalies on the sheaves, and that the ...

    Re: Who makes very good, High Quality chisels
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- I think you would be hard pressed to do better than Veritas. BH Davis ...

    Re: Jet Cabinet Saw on-going Problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- The bark sound at start-up sounds to me like loose belts. Bob ...

    Re: Using Winding Sticks To Remove Twist
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- I'd flatten it the way I flatten everything….on the jointer. If you don't have a j ...

    Re: Using Winding Sticks To Remove Twist
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- When I bought a CNC the first thing I set up was a fly cutter for exactly this sor ...

    Re: Using Winding Sticks To Remove Twist
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- By the way some responded to the Dr. I have to wonder how Professional this site h ...

    Re: Using Winding Sticks To Remove Twist
    A message posted at WOODWEB's Solid Wood Machining Forum (4/21) -- Yep. Winding sticks and hand planes are for old retired guys who have all the time ...

    Re: Maka mortiser
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21/25) -- Mark Hennebury is the only person I'm familiar with that rebuilds them, but he' ...

    Maka mortiser
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21/25) -- Does anyone know a company or a person in the United States that will work on a ...

    Re: Bench top molder review
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21/23) -- Bill is correct. ...

    Re: wide belt sander trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21/22) -- Spray at least the first inch of the belt backing material with black paint on ...

    Re: Tigerstop for knotty alder and label printer.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21) -- I just use a TigerStop as a stop and optimize manually using a printed cutlist and ...

    Re: Grinding to Axial Constant System for 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21) -- ok, i'm a newbie and I think I'm missing something here... it would seem that the ...

    Re: Grinding to Axial Constant System for 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21) -- Green Is the best picture but not entirely correct, the 10mm mm built in to the kn ...

    Tigerstop for knotty alder and label printer.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21) -- I'm considering adding the Tigerstop with optimizer to our upcut saw. Does anyone ...

    Re: Larick profile sanders
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21) -- I have the Turbosand heads and Larick. I prefer the Larick for the profile I have, ...

    Re: Grinding to Axial Constant System for 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21) -- Scott Green The below article may help you. Keep in mind these few things Profile ...

    Re: Grinding to Axial Constant System for 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21) -- Hey Russ I didn't review your articles which I am sure are excellent, so my apolog ...

    Re: Grinding to Axial Constant System for 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21) -- Rob Perfect, I did not have time to draw a sketch to illustrate, slammed here. Nic ...

    WideBelt Sander problem....
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21) -- I just discovered that I have a problem with my wide belt sander. I think I know w ...

    Re: WideBelt Sander problem....
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21) -- Perhaps I am misunderstanding your post but it sounds like the rubber drum has som ...

    Re: 1.25" spindle nut for Casadei F115 Shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21) -- Find a local small machine shop. They can make you one, possibly for less than a n ...

    Re: WideBelt Sander problem....
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21) -- Hi Rob, thanks for the idea but it's not the drum. Drum is fairly flat across most ...

    Re: Installing painted crown molding
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/21) -- We bring along an air-brush. After installing, we lightly break the m ...

    Re: Snipe on New 15" Grizzly Planer???
    A message posted at WOODWEB's Solid Wood Machining Forum (3/21) -- Every planer I have ever worked with had a manual that gave all the basic set ups ...

    Re: Installation Disk Cabinet Vision Solid Mfg. 3.2
    A message posted at WOODWEB's CAD Forum (3/21) -- where are you located ...

    Re: Weinig Profimat 23 Moulder - Material drifts off fence
    A message posted at WOODWEB's Solid Wood Machining Forum (2/21/25) -- I had this problem once, many years ago. As it turned out, I had the feed wheel ...

    Re: Molding/Shaper Knives
    A message posted at WOODWEB's Solid Wood Machining Forum (2/21/23) -- Yup, set the knives as even as possible. Depending on feed speed, DOC and how t ...

    Re: Another widebelt paper question
    A message posted at WOODWEB's Solid Wood Machining Forum (2/21/22) -- If changing the abrasive doesn't work, you may have an out of balance contact r ...

    Re: Another widebelt paper question
    A message posted at WOODWEB's Solid Wood Machining Forum (2/21/22) -- Dave, give us an update if you get the contact roller recovered & balanced. ...

    Edge Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (2/21/22) -- Does anyone have experience with split fence, power fed type edge sanders? I’m ...

    Re: Another widebelt paper question
    A message posted at WOODWEB's Solid Wood Machining Forum (2/21/22) -- Solved! Air controlled tracking was going too fast and paper worn as well so 2 ...

    Re: Wide belt contact drum recover
    A message posted at WOODWEB's Solid Wood Machining Forum (2/21) -- Can anyone tell me how to bypass the auto shutdown on a grizzly 37"widebelt i ...

    Re: RE: Double-sided Edger in shop
    A message posted at WOODWEB's Solid Wood Machining Forum (2/21) -- Cheap option is a Woodmaster thickness planer with the optional rip blades. ...

    Re: Adjusting a sliding table saw bed
    A message posted at WOODWEB's Solid Wood Machining Forum (2/21) -- No Felder guys either? It's the same system... ...

    Re: joiner knives tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (2/21) -- I will accept no less then perfect. This last time i sent my carbide tip knives to ...

    Re: Large Desk Top Construction
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/21) -- Lots of ways to do this but I would just make top 24 x 120 along wall an ...

    joiner knives tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (2/21) -- what should be acceptable tolerances for joiner knives. I received a set from a ve ...

    Re: Large Desk Top Construction
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/21) -- Thanks for the input Paul!! ...

    Chatter marks on widebelt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (2/21) -- At my place of work we have a Northtech 200 series 3 head widebelt sander. It has ...

    Re: Is it possible to thermoforming with industrial heat blanket?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/21) -- I'm talking about an industrial heat blanket. They are often used for be ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/21/22) -- I disagree that you can’t predict wood expansion, you most certainly can “predict” shr ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/21/22) -- I disagree that you can’t predict wood expansion, you most certainly can “predict” shr ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/21/22) -- I disagree that you can’t predict wood expansion, you most certainly can “predict” shr ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/21/22) -- Center pinning from the back or space balls will work. Space balls with a 3/16" g ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/21/22) -- You are overthinking this too much about wood shrinkage. You can't predict wood with a ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/21/22) -- Kevin, thanks for the detailed response. Humidity in shop is not controlled and the va ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/21/22) -- We have built many doors like this from many different materials with reveals ranging ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/21/22) -- There's no harm in working a deeper dado. Apply one or two coats of finish to the pane ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/21/22) -- DJS, thanks for the info. No one would care about 1/16”, i am more concerned if for ex ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/21/22) -- Maybe smart wasn't the best choice of words. I think you got some feed back nobody wan ...

    Insert Planer Knives to Solve Tearout Woes
    A message posted at WOODWEB's Solid Wood Machining Forum (1/21/22) -- I machine all my door rails and stiles from hard maple. I recently bought a new ...

    Re: Insert Planer Knives to Solve Tearout Woes
    A message posted at WOODWEB's Solid Wood Machining Forum (1/21/22) -- Before laying out the money on the new head try setting up the machine so the k ...

    Re: Insert Planer Knives to Solve Tearout Woes
    A message posted at WOODWEB's Solid Wood Machining Forum (1/21/22) -- Yes a spiral insert head will decrease tearout in maple, BUT the machine has to ...

    Re: Insert Planer Knives to Solve Tearout Woes
    A message posted at WOODWEB's Solid Wood Machining Forum (1/21/22) -- You care chipping maple because you are sending the boards thru in the wrong di ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/21/22) -- Exactly. Space Balls are about 1/4" in diameter so we allow about 3/16" extr ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/21/22) -- Thanks, unfortunately i have the side panels resawn out of flat sawn already, do you t ...

    Re: Saw Blade Storage System works like a file folder
    A message posted at WOODWEB's Solid Wood Machining Forum (1/21/22) -- Love it. Thanks. Mine are sitting in a drawer and could use a system like this! ...

    Re: Insert Planer Knives to Solve Tearout Woes
    A message posted at WOODWEB's Solid Wood Machining Forum (1/21/22) -- Okay thanks all. Just checked: lead time on a custom insert head is 4months! :( ...

    Re: Insert Planer Knives to Solve Tearout Woes
    A message posted at WOODWEB's Solid Wood Machining Forum (1/21/22) -- I believe yes. We have very little tear out even with crazy grain. ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/21/22) -- Edit… 1/16” if brave… ...

    Re: SCM SC3C Slider
    A message posted at WOODWEB's Solid Wood Machining Forum (1/21) -- I had one as my first and only panel saw in a larger shop than I am in now - no ro ...

    Vinyl Sealer brittle
    A message posted at WOODWEB's Finishing Forum (1/21) -- Hello I don't have much experience using vinyl sealer (or sealers in general). I spray 1 coat ...

    warped laminated panels
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/21) -- Good Morning, We are laying up 4x8 panels on PB with a VG laminate on on ...

    Re: Hook angle for hardwoods - Weinig 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (1/21) -- Depending upon your model of Weinig, I use many dual hook angle heads. This allows ...

    Re: imitation band saw finish
    A message posted at WOODWEB's Solid Wood Machining Forum (1/21) -- I have just learned that this can be done on my bandsaw using a slightly dull blad ...

    Re: imitation band saw finish
    A message posted at WOODWEB's Solid Wood Machining Forum (1/21) -- Drag the piece through your bandsaw backwards on a 45 degree angle to the blade. A ...

    Re: imitation band saw finish
    A message posted at WOODWEB's Solid Wood Machining Forum (1/21) -- Hi Chris I had heard about running the wood thru backwards but not at the 45 degre ...

    Re: Laguna LT1400 3hp bandsaw
    A message posted at WOODWEB's Solid Wood Machining Forum (1/21) -- Use the plate on the motor to find the correct amperage. My 3hp (2.2kw) 18" L ...

    ELITE aluminum composite 6mm
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/21) -- Hi I have a commercial diner job that requires an exterior application o ...

    Radial Arm Saw for Dado
    A message posted at WOODWEB's Solid Wood Machining Forum (1/21) -- I have been contemplating using a radial arm saw with a dado stack (in rip mode) w ...

    Re: Abet Laminiti
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/21) -- סובלים & ...

    Re: Titebond Cold Press
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/20/25) -- Haha, I've used this stuff too—it just looks unsettling. It's so run ...

    Re: Buying a Widebelt - what to check
    A message posted at WOODWEB's Solid Wood Machining Forum (12/20/22) -- Thanks folks. Anyone on here have any experience with shipping a used machine ...

    Re: Dressing wide belt drum
    A message posted at WOODWEB's Solid Wood Machining Forum (12/20) -- Thanks someone else put me in touch with them. They are very reasonable in price ...

    Re: looking for a machine
    A message posted at WOODWEB's Solid Wood Machining Forum (12/20) -- Top and bottom trimmer. There's a JKO listed on Ebay now, just for an idea. ...

    Re: Milling small raised panels
    A message posted at WOODWEB's Solid Wood Machining Forum (12/20) -- A lot of good ideas here, I will add a couple more. The Aigner fences will not wo ...

    cad moulding drawings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/20) -- Does anyone know if you can purchase cad drawings of moulding profiles? I need to ...

    Re: cad moulding drawings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/20) -- There are two options as far as I know of Weinig 2,000 profiles & Mirror Refl ...

    Re: Hydrolock moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (11/20/25) -- You only need to pressurize one fitting, there are channels that run from one ...

    Re: Laminate trimming woes
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/20/25) -- Ive used WD40 in the past but I do think the wear and color layers a ...

    Re: Laminate trimming woes
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/20/25) -- Use a regular trim bit and spray some lami lube or brush some Vasoli ...

    Widebelt roller recovering
    A message posted at WOODWEB's Solid Wood Machining Forum (11/20/23) -- I checked the old posts and none of the companies that can do widebelt rubber ...

    Re: Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (11/20) -- The machines you are considering are good machines. If you actually look at them ...

    Re: Thermofoil Press
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/20) -- The Italpresse ESTREMA MX single tray with pins can carry the full load ...

    Re: Steel City Jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/20) -- Another good source. http://www.cggschmidt.com ...

    Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (11/20) -- I have recently purchased a used Delta/Invicta DC-33 planer (model 22660) and am ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (11/20) -- Ken, thanks for this. Yes of course the knives should be parallel to the head. An ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (11/20) -- First off, the blades should be parallel with the head. Then start checking table ...

    General 340 drill press chuck removal
    A message posted at WOODWEB's Solid Wood Machining Forum (11/20) -- I want to remove the chuck on my General 340 drill press. Is the chuck threaded o ...

    Re: Machinery parts for discontinued machines
    A message posted at WOODWEB's Solid Wood Machining Forum (10/20/21) -- If American made, check with the manufacturer. Diehl still makes parts for saw ...

    Re: Machinery parts for discontinued machines
    A message posted at WOODWEB's Solid Wood Machining Forum (10/20/21) -- You might try Grizzly. A ton of import machines are sold in many colors. If yo ...

    Corian Seam
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/20) -- This is my kitchen where the countertop is located. I built and install ...

    Re: Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/20) -- I looked at both of those machines for quite some time. I ended up getting a Griz ...

    Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/20) -- I am considering purchase of a dovetail drawer machine. the Omec 650-M and the Ca ...

    Re: Solid walnut countertop
    A message posted at WOODWEB's Architectural Woodworking Forum (10/20) -- Dave, I think we may use the option you suggest. I've used that method befor ...

    Re: Solid walnut countertop
    A message posted at WOODWEB's Architectural Woodworking Forum (10/20) -- I would not be surprised to see a bit of crowning across the width and also ...

    Re: Solid walnut countertop
    A message posted at WOODWEB's Architectural Woodworking Forum (10/20) -- here is a pic. we did this in hickory so there is a lot of colour variation ...

    Re: Life After SketchUp - which way to go?
    A message posted at WOODWEB's CAD Forum (10/20) -- Chris Parmametrics on a global (change the door style on the entire job) level are useful, they ar ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (10/20) -- We are starting to use TopSolid Wood & Cam. It is extremely powerful and takes some time to le ...

    Re: molding on a 3hp shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (10/20) -- Depends on what type of wood you will run surely you can make 2 passes . ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (10/20) -- Thanks ...

    Re: Belt Sander thickness tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (9/20) -- Sorry I meant we remove .3mm per pass. You might want to remove .1 mm per pass or ...

    Re: Belt Sander thickness tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (9/20) -- Haha. I didn't want to mention the sander so as not to prejudice the response. It' ...

    Re: table saw motor slows down
    A message posted at WOODWEB's Solid Wood Machining Forum (9/20) -- I think Russ's answer is a good suggestion. I would also check all the electrical ...

    Re: Belt Sander thickness tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (9/20) -- That's not a belt sander its a drum sander. We have an 8,000 pound Butfering and w ...

    Re: Belt Sander thickness tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (9/20) -- As it is laminated, I would expect the density to be fairly uniform. The cantileve ...

    Re: Belt Sander thickness tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (9/20) -- If you have access to a jointer, it could take the variation out, then of course p ...

    Re: Belt Sander thickness tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (9/20) -- Wow! So 0.1mm is your tolerance - 0.004"? That's incredible; I thought those ...

    Re: Belt Sander thickness tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (9/20) -- What type of sander? How much material are you trying to remove? ...

    Laminate/Veneer vacuum press?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/20) -- We are considering buying a vacuum bag press for the occasional need of ...

    Re: Laminate/Veneer vacuum press?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/20) -- A urethane bag is more durable than a vinyl bag. Costs more, but tolerat ...

    machine repair person
    A message posted at WOODWEB's Solid Wood Machining Forum (9/20) -- Can anyone recommend a repairman in the Philly area? My specific need is to have s ...

    Re: Invicta Ti-14 spindle
    A message posted at WOODWEB's Solid Wood Machining Forum (8/20/24) -- Your spindles look different than mine. It is indeed right hand thread. If it w ...

    Re: Invicta Ti-14 spindle
    A message posted at WOODWEB's Solid Wood Machining Forum (8/20/24) -- This is from the manual. ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/20/21) -- Dustin, The amount of short runs has grown quite a bit in the last two years. I ...

    Re: Epic Corian Failure
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/20) -- Hey Doug, thank you for the response. I have read the fabrication manual ...

    Re: Epic Corian Failure
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/20) -- Expansion joints would be simply a 1/8" gap then caulked with black ...

    Re: 12/4 White Oak
    A message posted at WOODWEB's Solid Wood Machining Forum (8/20) -- David Worthington: I have no idea of your supplier base that you have been unhappy ...

    Re: Epic Corian Failure
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/20) -- Thank you for the response. I like the floating and independent slab ide ...

    Re: Epic Corian Failure
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/20) -- I went to corian school about 30 years ago, It seems to me that you have ...

    Re: Epic Corian Failure
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/20) -- What do the expansion joints look like? ...

    Re: Widebelt thickness
    A message posted at WOODWEB's Solid Wood Machining Forum (8/20) -- Some US mfg would do that, be sure to order with power raise and lower or do a lot ...

    Re: Which 36" wide belt???
    A message posted at WOODWEB's Solid Wood Machining Forum (8/20) -- I have a 37 in Sanya wide belt. I had an American Rotary 20 hp RPC that I ran a sl ...

    Re: Gang Rip Saws
    A message posted at WOODWEB's Solid Wood Machining Forum (8/20) -- Dave and David, The beauty of the moving blade gang rip is that you don't need to ...

    Re: Gang Rip Saws
    A message posted at WOODWEB's Solid Wood Machining Forum (8/20) -- You should look at the scmi M3 gang rip, you can get it with a 60hp motor and it's ...

    Re: What cutterhead for Panel Raising?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/20) -- I use a Byrd Raised panel cutter head,it works very well.You can run miles of pane ...

    Re: Top Solid help
    A message posted at WOODWEB's CAD Forum (8/20) -- I have Topsolid Design to do our layout and shop drawing submittals. The plan was to get into the c ...

    Re: Top Solid help
    A message posted at WOODWEB's CAD Forum (8/20) -- Mark, Are you able to do some shop drawings for one of special project?? Thanks Jiri ...

    Re: SCM shaper spindle swap
    A message posted at WOODWEB's Solid Wood Machining Forum (7/20/25) -- I am surprised those bushings exist! The wall thickness must be .0035 or so. I ...

    Re: SCM shaper spindle swap
    A message posted at WOODWEB's Solid Wood Machining Forum (7/20/25) -- Tom, Ammana, Whitehill and Rangate have T bushings to go 1 1/4” to 30mm. Probab ...

    Re: SCM shaper spindle swap
    A message posted at WOODWEB's Solid Wood Machining Forum (7/20/25) -- Tom, they are thin but work fine. ...

    Re: SCM shaper spindle swap
    A message posted at WOODWEB's Solid Wood Machining Forum (7/20/25) -- Trying the link again ...

    Re: SCM 20" Planer with spiral head
    A message posted at WOODWEB's Solid Wood Machining Forum (7/20/23) -- I see and read all these people that get wound up with some of these technologi ...

    Re: SCM 20" Planer with spiral head
    A message posted at WOODWEB's Solid Wood Machining Forum (7/20/23) -- Thank you for the feedback. I currently own a 20" SCM with a tersa head an ...

    Re: SCM 20" Planer with spiral head
    A message posted at WOODWEB's Solid Wood Machining Forum (7/20/23) -- My thoughts are that its nice to have a spiral head on a planer, I have an Oliv ...

    Re: SCM 20" Planer with spiral head
    A message posted at WOODWEB's Solid Wood Machining Forum (7/20/23) -- Bill, Thanks for the info, I have only used them on smaller machines, a wood ma ...

    Re: SCM 20" Planer with spiral head
    A message posted at WOODWEB's Solid Wood Machining Forum (7/20/23) -- I agree about the jointer; all my finish edges are run through my shaper with a ...

    Re: SCM 20" Planer with spiral head
    A message posted at WOODWEB's Solid Wood Machining Forum (7/20/23) -- There are benefits. Have you ever owned or used one. It’s quiet They don’t tear ...

    Re: Wood engraving on fiber engraver
    A message posted at WOODWEB's Solid Wood Machining Forum (7/20/22) -- If you ask me, oak is better for using a CNC engraving machine. Also, need to h ...

    Re: Shop based miter saw length gage
    A message posted at WOODWEB's Solid Wood Machining Forum (7/20) -- I've been using a 8' fence and stop system made by Advanced Measuring Sysyems for ...

    Dressing wide belt drum
    A message posted at WOODWEB's Solid Wood Machining Forum (7/20) -- I have an AEM widebelt sander and was wandering how much can I take off the contac ...

    Re: Solid Panel Cabinet Doors
    A message posted at WOODWEB's Furniture Making Forum (7/20) -- If your prefer getting the unassembled one, you should need the unfinished yet, so if ...

    Re: Which 26"-32" Thickness Planer for various kind of woods
    A message posted at WOODWEB's Solid Wood Machining Forum (7/20) -- Get a kraut machine - they are able to process wood using the metric system. If th ...

    Re: Which 26"-32" Thickness Planer for various kind of woods
    A message posted at WOODWEB's Solid Wood Machining Forum (7/20) -- All this and, "low cost" to boot? ...

    Plam delaminating issues
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/20) -- We are having continuing issues with plam delaminating from jobs after i ...

    Re: Delaminating NAF/FSC board
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/20) -- We are having de laminating and corner cracking on a regular basis. You ...

    Need glue suggestion to bent Laminate on alu ?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/20) -- Need to bent laminate some Wilsonart Laminate on a curved aluminium piec ...

    Re: Plunge/Other Router Inaccuracies?
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20/24) -- For over 30 years I have been consistent in using Porter Cable routers. Mostly ...

    Re: widebelt sanding maple
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20/23) -- Chris, You are removing 2mm (0.080") with abrasives. That is a lot. Also, ...

    Carbide Insert Breaking
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20/23) -- I am running a weinig unimat gold 6 head moulder and I am having issues with so ...

    Re: Laced splice in a replacement sander conveyor belt
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20/23) -- Laced belts are absolutely inferior to continuous belts. The lacing is much thi ...

    Re: Widebelt Sander Dimensioning Roller
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20/23) -- If i had a dime for every time i saw an idler roller sanding wood I'd have a lo ...

    Re: Motor brake for table router.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20/22) -- I did find a setup that should work.. but the price is 3 times what the router ...

    Re: Motor brake for table router.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20/22) -- Must be the multi-pole setup of the motor. It's not a universal motor like chop ...

    Re: Motor brake for table router.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20/22) -- So I tried that just now.. It made no difference to the motor coming to a stand ...

    Re: Motor brake for table router.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20/22) -- It should be. ...

    Re: SCM Jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20) -- I have an older f 410. Fantastic machine. Most parts available, though pricey. Bes ...

    Re: Which 36" wide belt???
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20) -- I agree with the others and just went through this process. I have a 200 amp servi ...

    Re: Which 36" wide belt???
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20) -- Interesting…I’m also researching a widebelt sander. I have a single phase 100amp s ...

    Re: Which 36" wide belt???
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20) -- I was told a 15 HP (compatible with 100 amp service) phase converter will start a ...

    Re: Solid surface market check
    A message posted at WOODWEB's Cabinetmaking Forum (6/20) -- James, I sincerely appreciate you taking the time to add that up. I quoted them $5800 and ...

    Re: Solid surface market check
    A message posted at WOODWEB's Cabinetmaking Forum (6/20) -- Did they have metal powder coated supprots and did they have coved backsplash ? ...

    Re: Solid surface market check
    A message posted at WOODWEB's Cabinetmaking Forum (6/20) -- we would build those tops installed for 5500. +/- ...

    Re: Planer knife balancing
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20) -- Hi Aaron: You should always keep the head filled with knives. Leaving this 4" ...

    Planer blade life
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20) -- I have read in numerous posts about how heat is the enemy of planer knives, as wel ...

    Planer knife balancing
    A message posted at WOODWEB's Solid Wood Machining Forum (6/20) -- We have a planer with an 18" wide head. We never run boards wider than 13&quo ...

    Re: Dovetail Machines....
    A message posted at WOODWEB's Solid Wood Machining Forum (5/20) -- We used a few of the old cast aluminum Porter Cable DT jigs for years... three yea ...

    Re: Dovetail Machines....
    A message posted at WOODWEB's Solid Wood Machining Forum (5/20) -- I had looked at that machine along with a few others. Ended up going with the Griz ...

    Re: Dovetail Machines....
    A message posted at WOODWEB's Solid Wood Machining Forum (5/20) -- I never cared for prefinishing - you either leave the end grain of the front/back ...

    Re: Dovetail Machines....
    A message posted at WOODWEB's Solid Wood Machining Forum (5/20) -- Any chance you could give me a cost on the PCD bit? The Omec was $69 but the shipp ...

    Re: laminating white oak onto MDF substrate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/20) -- It won't work. Failure depends on what time of year you do the work. Glu ...

    Re: Dovetail Machines....
    A message posted at WOODWEB's Solid Wood Machining Forum (5/20) -- How about prefinishing before cutting the dovetails? Would it work, or no matter w ...

    Re: Dovetail Machines....
    A message posted at WOODWEB's Solid Wood Machining Forum (5/20) -- Thanks, sort of what I figured. Had to ask. ...

    Re: Paint grade doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/20) -- I'm with John on this. Solid mdf doors look fake. I have used them exclusively in the pas ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/20) -- I neglected to mention that this would be a 2-1/4" thick door. Pretty mu ...

    Re: Chipping/splitting on edge of casing, American beech
    A message posted at WOODWEB's Solid Wood Machining Forum (5/20) -- Hey RT! Trust me, Beech is not our first choice for paint grade! If it was up to u ...

    Quality differences in corrugated shaper heads
    A message posted at WOODWEB's Solid Wood Machining Forum (5/20) -- As I shop for a head, they kinda seem all the same. CNC milled steel, balanced. Ar ...

    Formica Brand Laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/20) -- Is anybody but us having major problems with the quality and shipping da ...

    Re: Hitachi resaw blade sharpening
    A message posted at WOODWEB's Solid Wood Machining Forum (5/20) -- I believe the teeth are Stellite and can be sharpened on a regular grind stone. ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/20/24) -- Hi Allen/all. The set up of the F3 to trial cutting channels as the original qu ...

    Re: Topped out
    A message posted at WOODWEB's Solid Wood Machining Forum (4/20/24) -- First I'm thankful i& rejuvenated by the words of encouragement and underst ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/20/24) -- This is just to put up the fourth pic showing the test cuts. ...

    Re: What does your shop use for crosscutting face frame stock?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/20/23) -- Northfield 12" jump saw with a Razorgage stop. Used a Omga mitresaw for ye ...

    Laminating Wood on Wood Veneer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/20/23) -- We have been using Wilsonart 951 contact cement to adhere wood on woo ...

    Re: Running curved stock on molder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/20/23) -- Another thought is if the heads are just slightly out of alignment with the fen ...

    Re: Running curved stock on molder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/20/23) -- I should clarify the drawing is looking from the side and the cutter drawn is t ...

    Re: Scallop depth
    A message posted at WOODWEB's Solid Wood Machining Forum (4/20) -- The OP's question about how deep are knife marks on moulded or planed wood can be ...

    Re: Dimples/Pimples
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/20) -- Have you tried using a peel coat on the laminate? Both WilsonArt and For ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/20) -- Kent I am glad you found the problem, I too have seen this issue many times, peopl ...

    Re: Jet Cabinet Saw on-going Problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/20) -- Look at the way the trunnion is mounted to the cast iron saw table. On older Delta ...

    Re: Jet Cabinet Saw on-going Problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/20) -- Thanks B.H., I've thought along those lines of the motor since sometimes there is ...

    Re: Jet Cabinet Saw on-going Problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/20) -- When you go to AWFS be sure to visit with the folks at SawStop. A big investment b ...

    Using Winding Sticks To Remove Twist
    A message posted at WOODWEB's Solid Wood Machining Forum (4/20) -- A customer has a piece of wood from a tree that stood where the foyer of their hou ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20/24) -- Hi, glad to see new members on the forum! Regarding your question about using t ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20/24) -- I'd be squeamish about having the tool completely buried in the material. Hog m ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20/24) -- There seems like a lot of better options to get this cut . Dado blade and a sle ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- $2000 is absurd. Any good machine shop could fix it in a couple of hours. Before y ...

    Re: corian tops
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/20) -- I too think a mason mitre is the right choice. You can also try using a ...

    Re: Leadermac moulder operation
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- If there is no shim, then there has to be some kind of adjustment on the casting n ...

    Re: Straight line Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- https://www.weinigusa.com/us/products/pre-owned-machines.html ...

    Re: Grinding to Axial Constant System for 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- Scott The Weinig axial constant system is built off of a 10mm or .394" starti ...

    Re: Grinding to Axial Constant System for 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- Scott Here is an article on how to set up your moulder axial constant after your h ...

    Re: Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- "Our problem with preplaned material was all the severe hit and miss." T ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- What would happen? Based on experience with kickbacks and flying wood parts, the b ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- I would like to report a success!! Knowledge obtained and shared, behavior correct ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- HAH! Jim! I keep thinking I need to pull out the iphone video camera and just docu ...

    1.25" spindle nut for Casadei F115 Shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- Just acquired this shaper and need a spindle lock nut for it. I don't want to wait ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- Me? I was going to pen a thoughtful response, but unfortunately I'm needed back on ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- It's Mel, thought it was Me! Damn near vision thing.. Apologies again Rob ...

    Re: Snipe on New 15" Grizzly Planer???
    A message posted at WOODWEB's Solid Wood Machining Forum (3/20) -- I'm with door shop guy, adjust the bed rollers so they just catch the board passin ...

    Re: Hot press info
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/20) -- It all depends on the temperature and pressure;at a normal pressure arou ...

    Weinig Profimat 23 Moulder - Material drifts off fence
    A message posted at WOODWEB's Solid Wood Machining Forum (2/20/25) -- Hi all, Im working on setting up a new to me Weinig Profimat 23. The wood drift ...

    Re: Solid wood stair treads
    A message posted at WOODWEB's Architectural Woodworking Forum (2/20/24) -- Selecting the right adhesive is essential for a strong glue-up. Consider u ...

    Re: Molding/Shaper Knives
    A message posted at WOODWEB's Solid Wood Machining Forum (2/20/23) -- I have always set my collar knives set ups as equal as possible. IMHO only 1 kn ...

    Re: Molding/Shaper Knives
    A message posted at WOODWEB's Solid Wood Machining Forum (2/20/23) -- Line them up equally, only one is going to do the majority of the cutting anywa ...

    Re: Molding/Shaper Knives
    A message posted at WOODWEB's Solid Wood Machining Forum (2/20/23) -- You’re the type of person that gets taken out Snipe hunting at night with a fla ...

    Need help with old Quincy compressor
    A message posted at WOODWEB's Solid Wood Machining Forum (2/20/22) -- I bought an old 80 gallon Quincy air compressor at auction for like $80. I am a ...

    Re: RE: Double-sided Edger in shop
    A message posted at WOODWEB's Solid Wood Machining Forum (2/20) -- Short answer is a gang rip saw. Older models are fixed dimensions that are adjusta ...

    RE: Double-sided Edger in shop
    A message posted at WOODWEB's Solid Wood Machining Forum (2/20) -- Is there a shop machine with 2 ripping blades that could straighten the edges out ...

    Re: Pneumatic tracking on a wide belt sander.
    A message posted at WOODWEB's Solid Wood Machining Forum (2/20) -- Thank you to both of you. My machine does not have an oiler, a moisture blow out o ...

    Re: Recent six head moulder purchase
    A message posted at WOODWEB's Solid Wood Machining Forum (2/20) -- The short answer is you will generally put a straight tool on the first right and ...

    Re: Contact Roller for Wide Belt
    A message posted at WOODWEB's Solid Wood Machining Forum (2/20) -- hey i did some research for you you can have a look at this link http://www.orf.ae ...

    Can I hard seam a Corian 690 sink?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/20) -- Hello. I have a customer inquiring about a #690 farmhouse sink. I see th ...

    Felder saw blades
    A message posted at WOODWEB's Solid Wood Machining Forum (2/20) -- Getting a felder saw and was wondering how well their blades perform. I've been re ...

    Re: Sliding Dovetail in Solid Material
    A message posted at WOODWEB's Furniture Making Forum (2/20) -- Glue the whole thing; forget about any taper; think it through so you won't have to di ...

    1 glue line or two ?
    A message posted at WOODWEB's Architectural Woodworking Forum (1/20/22) -- When making door stiles out of laminated SOLID lumber is it best to use 3 ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/20/22) -- I haven't done the calculations to double check the the answer but it sounds about rig ...

    SCMI T120 K Bearing replacement
    A message posted at WOODWEB's Solid Wood Machining Forum (1/20/22) -- Wondering if anyone has replaced the bearings in a mid 80's T120 shaper. Having ...

    Re: Solid panel in vanity with reveal
    A message posted at WOODWEB's Cabinetmaking Forum (1/20/22) -- Here is a screen shot for a better idea. It is showing a 1/4” reveal, I would like to ...

    Re: Sliding table shapers
    A message posted at WOODWEB's Solid Wood Machining Forum (1/20) -- The removable tenon tables that the Mid European shapers had/have are similar to t ...

    SCM SC3C Slider
    A message posted at WOODWEB's Solid Wood Machining Forum (1/20) -- I’m looking to purchase a new sliding table saw. Hoping someone has some experienc ...

    Re: Sliding table shapers
    A message posted at WOODWEB's Solid Wood Machining Forum (1/20) -- Thanks Dave. I currently use a "home made" version of that. I've never s ...

    Re: Bent wood laminations
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/20) -- The springback is greatly reduced if you use plastic resin glue. ...

    imitation band saw finish
    A message posted at WOODWEB's Solid Wood Machining Forum (1/20) -- I have a client that has requested a wood that has a finished surface that looks l ...

    Re: Laguna LT1400 3hp bandsaw
    A message posted at WOODWEB's Solid Wood Machining Forum (1/20) -- With my farm background, I'd say plug it in and saw. But when installed in a comme ...

    Re: T&G Shaper Cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (1/20) -- Thanks for the responses. I'm studying the insert knives and heads, looks like the ...

    Re: Laguna LT1400 3hp bandsaw
    A message posted at WOODWEB's Solid Wood Machining Forum (1/20) -- What do the folks at Laguna say? ...

    Sanding SS sink
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/20) -- We have a Wilsonart SS sink installed over ten years ago with a lot of h ...

    Strong end-grain joint
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19/24) -- Here are some photos of the process I use for making pine rings approx. 48&quo ...

    Re: Buying a Widebelt - what to check
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19/22) -- Dennis, "rednecked the electrical" might not be the most accurate te ...

    Re: ML Campbell Turino wrinkling
    A message posted at WOODWEB's Finishing Forum (12/19/22) -- Is this on mdf? Solid wood? What grit are you sanding with on the raw? Could be the case ...

    Re: Stroke anding technique
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- Ditch the rubber. Try using 3/16 or 1/4" felt on a hand pad. Keep moving the ...

    Re: Dressing wide belt drum
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- Call Finzer Roller. Many locations. Thy should have guidance for you. If needed t ...

    Re: Rip fence modification
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- The OP never said he purchased it new from Felder, in fact he said it's a 2007. N ...

    Re: Laminate Seams on Tube/Column
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/19) -- Make sure you back off your edges or they'll look open. And the joint w ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- Though, obviously, different, the situation provides food for thought on the matt ...

    Re: Milling small raised panels
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- Aigner make a shaper fence with "fingers" that close to make a continuo ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- The problem as described by the OP is not dents made by chips on rollers. This is ...

    Re: Milling small raised panels
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- Guys thanks for the help and input. I will look into a couple of the sleds recomm ...

    Re: Milling small raised panels
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- Here is a link to a unit as described above. http://www.ebay.com/itm/Reliable-Cut ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- We see chips stuck on rollers when we run Sugar Pine. Resin gets on the rollers a ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- Many moulders already have these built in to the bed plate roller assemblies, it ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- It appears something to remove chips from the rollers, such as the brush used to ...

    Re: Milling small raised panels
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- You might try and find a Panel Crafter. The one I have works well. ...

    Re: castor on plywood
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- Nick, I agree with Rich. I have have a Globo borer, ~1500lb, on 6 or 8" cast ...

    Re: castor on plywood
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- If you already have a concrete floor don't screw it up trying to overlay it with ...

    Re: resawin problem
    A message posted at WOODWEB's Solid Wood Machining Forum (12/19) -- I have an old Rockwell version of the 14" bandsaw with a riser kit on it and ...

    Re: 1/4" Corian over plywood
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/19) -- Leland I would not do it at all. There are reasons that the back side o ...

    Re: 1/4" Corian over plywood
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/19) -- G'day, Cut, glue and fold your corian using their correct adhesive. Use ...

    Re: 1/4" Corian over plywood
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/19) -- Marty, So you would build the structure and then fit the mitered corian ...

    Re: Laminating advice needed
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/19) -- Wilsonart 3000 and a pinch roller. Can be sprayed on. That amount of pa ...

    Re: 1/4" Corian over plywood
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/19) -- Not a problem mate. Just remember lots of smaller blobs are better than ...

    Re: 1/4" Corian over plywood
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/19) -- I second the idea by Marty. Have done lots of similar stuff using silic ...

    Re: 1/4" Corian over plywood
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/19) -- Thank you Marty, This makes sense to me ...

    Laminate trimming woes
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/19/25) -- We've started adding some laminate clad components to our offerings. ...

    Seized axial / radial adjustments
    A message posted at WOODWEB's Solid Wood Machining Forum (11/19/23) -- I just bought a used Weinig quattromat and the top axial & left radial adj ...

    Edgbander
    A message posted at WOODWEB's Solid Wood Machining Forum (11/19/22) -- hi i am considering to ger a new edgebander scmi me 35tr cantek MX370P any one ...

    Re: General 130 planer problem
    A message posted at WOODWEB's Solid Wood Machining Forum (11/19/21) -- The paper feed roller is worn out. The paper feed roller is the most abraded p ...

    Re: Stroke anding technique
    A message posted at WOODWEB's Solid Wood Machining Forum (11/19) -- I'd try a loose pad. I use something really crude, wood concrete trowel with foam ...

    Re: How Is This Door Made?
    A message posted at WOODWEB's Architectural Woodworking Forum (11/19) -- There was recently an article about a company manufacturing cross laminated ...

    Re: Steel City Jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/19) -- At the top of this page (at least on my computer...) is an ad/link for WKW - Wisc ...

    Re: Flooring with Circle Saw Milling Marks
    A message posted at WOODWEB's Solid Wood Machining Forum (11/19) -- we built a machine to reproduce accurate(authentic) saw marks. to date have made ...

    Re: Choosing right planer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/19) -- Good points! I'll look for someone in our area that offers that service and get e ...

    Re: Freeborn C&S Set
    A message posted at WOODWEB's Solid Wood Machining Forum (11/19) -- All tooling set loses a little of their fit each time they get sharpened just bec ...

    Re: Freeborn C&S Set
    A message posted at WOODWEB's Solid Wood Machining Forum (11/19) -- Each time a set of cutters gets sharpened it's going to change the fit of the joi ...

    Re: Vertical Plank Slab Front Door
    A message posted at WOODWEB's Architectural Woodworking Forum (10/19) -- Been discussed many times here. Usual consensus is veneer if you don't want ...

    Re: Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/19) -- Hey Russ, We're finished running the job by feeding the pieces backwards, just ha ...

    Re: Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/19) -- James I believe the hook angle on a W&H head is 17 degree or at least the cut ...

    Re: Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/19) -- James I just checked my cutter head for the W & H, sorry, it is 23 degrees no ...

    Re: Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/19) -- Russ, Is this the head you are using? http://www.williamsnhussey.com/collections/ ...

    Re: 1987 Weinig P22N Moulding Machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/19) -- The problem you are experiencing is coming from worn dovetails on the casting whi ...

    Re: Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/19) -- James The head I use is specifically designed for grinding W& H or Shop Fox k ...

    Re: Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/19) -- James The bore of my W & H cutterhead is 1-1/2" with a dia of 122mm. Wha ...

    Re: Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/19) -- James The page 404ed but if it's designed for a W & H it should work just fin ...

    Re: Solid walnut countertop
    A message posted at WOODWEB's Architectural Woodworking Forum (10/19) -- Bad idea. We have made thes by double laminating the edges for 6" to gi ...

    Re: Solid walnut countertop
    A message posted at WOODWEB's Architectural Woodworking Forum (10/19) -- How wide? ...

    Re: refacing options - natural oak to white painted
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/19) -- I've seen pvc edge banding up to 55mm wide. No painting at all if th ...

    Re: Cutterhead measuring
    A message posted at WOODWEB's Solid Wood Machining Forum (9/19/24) -- 2 options, get a measuring stand or a really good set of machinist parallels. I ...

    Re: Renderings For Stair
    A message posted at WOODWEB's CAD Forum (9/19/21) -- Have you looked at Solid Works? ...

    Belt Sander thickness tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (9/19) -- I’m curious as to what others think are acceptable tolerances in belt sanders. I’m ...

    Re: Belt Sander thickness tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (9/19) -- I was not clear; the 0.3mm difference varies along the length. ...

    Re: Jointer chatter --- bad bearings?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/19) -- I am not sure how familiar you are with knife etc., so let me suggest one remote p ...

    Re: Hitachi cb75F resaw
    A message posted at WOODWEB's Solid Wood Machining Forum (9/19) -- The place you need to send the blade(s) for resharpening is a place that sharpens ...

    Re: Adjusting tables on an scmi f 410
    A message posted at WOODWEB's Solid Wood Machining Forum (9/19) -- Hah! Gotta love that new policy from SCM North America. I have a 1999 SCM planer a ...

    Re: Hitachi cb75F resaw
    A message posted at WOODWEB's Solid Wood Machining Forum (9/19) -- Ok. Thanks for all the advice. I looked at youtube and saw a guy sharpen his with ...

    Re: Hitachi cb75F resaw
    A message posted at WOODWEB's Solid Wood Machining Forum (9/19) -- When I had a Wadkin PBR, I sent the 3" blades to Menomineee Saw in the UP of ...

    Re: Hitachi cb75F resaw
    A message posted at WOODWEB's Solid Wood Machining Forum (9/19) -- Hey thanks for the info. I picked this saw up for $300 so I figured I could put so ...

    Re: Moisture Meter Setting
    A message posted at WOODWEB's Solid Wood Machining Forum (9/19) -- Do you have an air space under the piece you are measuring? This is important. ...

    Re: Beaded Frames
    A message posted at WOODWEB's Solid Wood Machining Forum (8/19/24) -- The milled vs beaded is not a discussion of equivalence Milled: 1.S4S cut to le ...

    Re: Wire brushing lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (8/19) -- All the answers seems like you really need to be in manufacturing before you get t ...

    Re: Wood Countertop advice
    A message posted at WOODWEB's Finishing Forum (8/19) -- I used Osmo 2K on my Birdseye maple dining room table, and it's held up great. The table get ...

    Re: Shaper cutter for 5/16" bead
    A message posted at WOODWEB's Solid Wood Machining Forum (8/19) -- Willie I can make you a 5/16" thick corrugated high speed steel moulding kniv ...

    Re: Shaper cutter for 5/16" bead
    A message posted at WOODWEB's Solid Wood Machining Forum (8/19) -- Thanks Pete D and Russ. I'll probably buy the Magnate cutter for now because it's ...

    Re: What cutterhead for Panel Raising?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/19) -- Thanks for the responses guys. I am looking into the options recommended so far. H ...

    Hand Trimmer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/19) -- Can anybody tell me where to get this trimmer? I would like to pick up a ...

    Stainless steel laminated to baltic birch
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/19) -- I recently had a client request a counter top constructed of stainless s ...

    Re: Stainless steel laminated to baltic birch
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/19) -- I think your best bet would be to scribe the plywood tops first, then le ...

    Re: Top Solid help
    A message posted at WOODWEB's CAD Forum (8/19) -- Jiri, You need to know how to put fuel in the car before you drive it. My suggestion is to use the ...

    Re: Top Solid help
    A message posted at WOODWEB's CAD Forum (8/19) -- Jiri, Just wanted to add that there's an abundance of youtube Topsolid videos. I learned a lot ther ...

    Re: SCM shaper spindle swap
    A message posted at WOODWEB's Solid Wood Machining Forum (7/19/25) -- Tom, It will mean a visit to your local machine shop but you could have a sleev ...

    Re: SCM shaper spindle swap
    A message posted at WOODWEB's Solid Wood Machining Forum (7/19/25) -- Thanks BH, I decided to buy the ebay spindle. We will see if the taper and thre ...

    Re: Which 26"-32" Thickness Planer for various kind of woods
    A message posted at WOODWEB's Solid Wood Machining Forum (7/19) -- Dear tcc, I already bought a china made planer, it break down (component burnt but ...

    Re: Which 26"-32" Thickness Planer for various kind of woods
    A message posted at WOODWEB's Solid Wood Machining Forum (7/19) -- Dear experts, I mean i need to plane 10 X 1000kgs of wood everyday. Which 26" ...

    Re: Which 26"-32" Thickness Planer for various kind of woods
    A message posted at WOODWEB's Solid Wood Machining Forum (7/19) -- If you have a way to move 10 ton of lumber get a USA made planer that weighs at le ...

    Re: Remuneration
    A message posted at WOODWEB's Business and Management Forum (7/19) -- "Mel -- how does your shop track custom tasks? I gather they are quite suc ...

    Plunge/Other Router Inaccuracies?
    A message posted at WOODWEB's Solid Wood Machining Forum (6/19/24) -- This is posted in the hope of triggering a wider discussion on hand held router ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (6/19/24) -- Pic of typical assembled joint - the shoulders fortunately turned out to be in ...

    CNC Router Suggestions
    A message posted at WOODWEB's CNC Forum (6/19) -- I own a midsize furniture company and we are ready to purchase our first CNC machine. I have lots o ...

    Re: Rejuvinating Molder feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/19) -- We have tried everything over the years , now we just buy new ones from Western ro ...

    Re: Sharpening Circular Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (6/19) -- Sent it to Ct saw & Tool , in Stratford, Ct. ...

    Re: Which 36" wide belt???
    A message posted at WOODWEB's Solid Wood Machining Forum (6/19) -- Found out I need to recable my shop since I only have 100 amp service. Machine dea ...

    Re: edgebanding trimmer recommendations
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/19) -- Thanks Chris. Before your post I had never heard of this brand. ...

    Shaper w/ tenon tooling vs Single End Tenoner
    A message posted at WOODWEB's Solid Wood Machining Forum (5/19/23) -- I have a T130NPS , cast slider. I have opportunity to buy a Heian tenoner. A he ...

    Re: Three phase question
    A message posted at WOODWEB's Solid Wood Machining Forum (5/19/23) -- Typically you need at least 50% more Ph conversion than HP to start depending o ...

    Re: grizzly shaper trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (5/19/22) -- Is you ask me, there aren't enough pressure on the feeder. ...

    Re: Splitting on a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (5/19) -- In general, yes, it's wood and it'll do that. The drying process is the culprit. I ...

    Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/19) -- Just purchased my first power feeder, a Steff 2048 single phase. After running it ...

    Re: Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/19) -- I usually run mine for anywhere from 15 min. to an hour and a half and sometimes i ...

    Re: Wrapping a cone
    A message posted at WOODWEB's Architectural Woodworking Forum (5/19) -- http://www.woodweb.com/knowledge_base/Wrapping_a_cone_with_laminate.html /www ...

    Re: Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/19) -- Mine run warm/hot as well.. Like the door shop guy said when it gets left on for a ...

    Re: Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/19) -- Interesting.. I will follow up with the supplier, but good to know this may be som ...

    Re: Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/19) -- Try only about 1/8" lower but yes the motors do get hot. ...

    Re: Old Planer machine shooting "bullets"
    A message posted at WOODWEB's Solid Wood Machining Forum (5/19) -- My workplace very dirty, no dust collection, no toilet, no water supply. I will de ...

    Re: Laminate edge
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/19) -- cut a 3" strip of 1/2" mdf. apply laminate. cut a 4" stri ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (5/19) -- Related to my previous comments about number of teeth in the cut, I found this FRE ...

    Compact Laminates
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/19) -- I just wanted to know what is the difference between compact laminates a ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/19) -- I think you must consider all the aspects whether positive or negative to get ...

    Re: Gluepot cleaning / repair
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/19/25) -- I ended up going with them for the rebuild. it had a bunch of burnt g ...

    Re: SCMI MiniMax WIN CS63 Bed Adjustment
    A message posted at WOODWEB's Solid Wood Machining Forum (4/19/24) -- It seems like your issue might stem from an imbalance in the jackscrews control ...

    Re: Running curved stock on molder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/19/23) -- Thank Joe, come to thinkl of it we had some oak that sat for 2 days after first ...

    Re: Running curved stock on molder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/19/23) -- Dave, working down lumber from the rough do you let it set at least over night ...

    Homag KL 73/A20
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/19) -- I am currently using a Homag KL 73/A20 edgebander for my laminate projec ...

    Re: Porter Cable laminate trimmers
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/19) -- Bosch make an excellent kit that comes with a standard trimmer, an offse ...

    Jet Cabinet Saw on-going Problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/19) -- This is something I've posted about before that is absolutely driving me nuts!!! T ...

    curved edgebander reviews
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/19) -- I am looking to purchase a edge bander that does curves, with a budget o ...

    Circular Saw makes huge sound and splitting cuts on me
    A message posted at WOODWEB's Solid Wood Machining Forum (4/19) -- When i first use the circular saw, it works extremely well, with "no sense / ...

    Re: Makita 9 1/4" Circular Saw Serious problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/19) -- What is the most accurate and most easiest way to check 90 degree and 45 degree cu ...

    Re: Makita 9 1/4" Circular Saw Serious problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/19) -- You cannot trust the degree gage on the tool, you need to check/verify that the bl ...

    Re: Jet Cabinet Saw on-going Problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/19) -- my new circular saw blade looks worse after 2 days use... and i am going for a new ...

    Re: Glue / dust and whatever stuck @ diamond hone!!!
    A message posted at WOODWEB's Solid Wood Machining Forum (4/19) -- oh.. thanks. ...

    Re: Ripping hardwood
    A message posted at WOODWEB's Solid Wood Machining Forum (4/19) -- try using a thin kerf blade they take less power if ripping less teeth are better ...

    Re: UNIQUE 313 MITER
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19/26) -- We had the same issue on our 313. What helped us most: Light climb cut finish p ...

    Re: Bandsaw SCM Formula s640p Blade guides question
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19/24) -- Hi Mathias. I don't have answers but perhaps the following may prompt a few mor ...

    Re: Bandsaw SCM Formula s640p Blade guides question
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19/24) -- Thank you Rich, I took a look at the guides, They look like they would fit. Tha ...

    Re: Bandsaw SCM Formula s640p Blade guides question
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19/24) -- Too many posts - but measuring the rate at which you can manually feed represen ...

    Re: Bandsaw SCM Formula s640p Blade guides question
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19/24) -- The editing option clipped off a couple of my opening paragraphs Mathias when I ...

    Re: Bandsaw SCM Formula s640p Blade guides question
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19/24) -- HI M. Rushing the second message above meant that it lost its intended tone. Th ...

    Re: Need a new (or used) shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19/23) -- I didn't have any issue finding shapers on Craig's. If you ran the cutter in qu ...

    Re: Need a new (or used) shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19/23) -- If you want to spend your whole bank roll here is a nice one from a machinery d ...

    Bench top molder review
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19/23) -- looking for suggestion on inexpensive bench top planer for home shop Price and ...

    Re: Need a new (or used) shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19/23) -- Here is another, might be a bit closer. These old machines run mostly forever a ...

    Re: Bench top molder review
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19/23) -- This is not a home shop forum. Good luck ...

    Re: Bench top molder review
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19/23) -- Let try bench top planer review ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- David Waldman: While what Rich recommends, or some variation of it, is the right t ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- Rich, I believe you are right and that is what I was expecting. The possible addit ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- TonyF - that may work. Thanks for the suggestion. ...

    Re: Panel Saw Blades
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- I ended up picking up FS tool XL 4000 blades from the place i bought the saw from. ...

    Re: Straight line Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- Thanks for the reply guys, much appreciate the tips. Bill: We're already dealing w ...

    Re: Straight line Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- There are two types of Quattromats: one has hand cranked heads with a digital read ...

    Re: Straight line Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- David care to post a link to used equipment on wenigs site? I can't seem to find i ...

    Grinding to Axial Constant System for 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- Using a few DIAGRAMS, can someone give me the simple explanation of the Weinig Axi ...

    Re: Grinding to Axial Constant System for 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- Go to Mirror Reflections Website. Russ wrote a bunch of articles about moulder and ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- About 10 years ago we had just moved into a new location. There was a lot of odd c ...

    Re: Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- We always tried to get our lumber in rough. We ran a lot of thick moulding out of ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- Come on Scott, you should have grabbed a video camera for that one! Body cameras r ...

    Re: Insert shaper head
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- Ye s W&H sells one and also CGG Schmidt sells one. I have the 4" head and ...

    Re: Insert shaper head
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- We have bought corrugated back knives that were also bored for the W&H. Obviou ...

    Snipe on New 15" Grizzly Planer???
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- Just got a new planer in the shop that replaces our old one that died last week. W ...

    Re: Cabinetvision screen to machine
    A message posted at WOODWEB's CAD Forum (3/19) -- Les, or Anyone Else- Please give us some options, like Solid Works ? or ? Please give us an idea ho ...

    Re: Snipe on New 15" Grizzly Planer???
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- Bed rollers need to be a hair ABOVE bed surface. Check your pressure bar! Check ev ...

    Re: Snipe on New 15" Grizzly Planer???
    A message posted at WOODWEB's Solid Wood Machining Forum (3/19) -- what did grizzly tec department suggest? ...

    Need help with old Quincy compressor
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19/22) -- I bought an old 80 gallon Quincy air compressor at auction for like $80. I am a ...

    Re: Another widebelt paper question
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19/22) -- What kind of tracking does your sander use? Could be from the oscillation of th ...

    Re: SCMI 24" WIN CS 63 Widebelt Tracking - Pneumatic to Electric Eye Conver
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19/22) -- My understanding is that older machines and also less expensive machines tend t ...

    Re: Another widebelt paper question
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19/22) -- That is most likely from the splice on a worn belt. Put a new belt on and run i ...

    Re: Another widebelt paper question
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19/22) -- It may be caused by the constant vibration of the broadband sander at work ...

    Re: Seeking Shaker passage door shaper cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19) -- Great Lakes Custom Tooling makes this great head. It is on page 16 of the catalog ...

    Re: Seeking Shaker passage door shaper cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19) -- Look at Freeborn Tool's web site. They have stacked cutter sets & inserts to d ...

    Re: 1/2" Ogee profiled beading/stick
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19) -- Dan Great question Here is my solution, milling less than 3/4" wide presents ...

    1/2" Ogee profiled beading/stick
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19) -- How would I go about running a 1/2" x 1/2" wood beading on either a shap ...

    Re: Adjusting a sliding table saw bed
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19) -- Desperation deepening... Fingers crossed a tech from Casadei in Italy gets back to ...

    Pneumatic tracking on a wide belt sander.
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19) -- Having trouble getting the head to oscillate on a RB-25 powermatic sander. Downloa ...

    Re: Pneumatic tracking on a wide belt sander.
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19) -- The double action cylinder that controls the belt oscillation may be stuck. Some m ...

    Recent six head moulder purchase
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19) -- I recently purchased a Wadkin six head moulder with two right side heads and only ...

    Purchasing a new edgebander
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/19) -- We have narrowed our edgebander search down to the Brandt Ambition 1230 ...

    Re: Laser
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19) -- That's fairly reasonable. I think Northtech wanted $1500 for theirs. We bought it ...

    Re: desparately need a resaw solution
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19) -- Check out the attached YouTube video - I've seen this guy at several shows and he ...

    Re: Sliding Dovetail in Solid Material
    A message posted at WOODWEB's Furniture Making Forum (2/19) -- John, When I do large ones, I try to set the fence to get a perfect fit all the way ac ...

    Re: Sliding Dovetail in Solid Material
    A message posted at WOODWEB's Furniture Making Forum (2/19) -- Hi Brian, you're right about that article in FW. I've researched their on-line files a ...

    Re: Sliding Dovetail in Solid Material
    A message posted at WOODWEB's Furniture Making Forum (2/19) -- Thanks for all of your responses to my post. I've attached a link to my blog post on m ...

    Re: Hitachi resaw blade sharpening
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19) -- i sent the same type blade to SUFFOLK SAW of IDAHO 1000 GARDEN GULCH RD PRINCETON, ...

    Re: desparately need a resaw solution
    A message posted at WOODWEB's Solid Wood Machining Forum (2/19) -- ML, learned a lot from that video. The author certainly knew his saw. Thanks for p ...

    Power Feeder Tires advice
    A message posted at WOODWEB's Solid Wood Machining Forum (1/19/24) -- Whats the best material for tires on a power feeder for feeding mostly dressed ...

    Looking For A Finishing Consult
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/19/24) -- Hey there...New to the forum. Would anyone here be able to provide a ...

    Re: Power Feeder Tires advice
    A message posted at WOODWEB's Solid Wood Machining Forum (1/19/24) -- J&G machinery ask for Andy Shook Blue rollers same width as stock steff tir ...

    Re: Dovetail drawer machine
    A message posted at WOODWEB's Solid Wood Machining Forum (1/19) -- Hey Andrew or anyone who might know. The Royce/Ayr PCD bit for the equivalent of t ...

    Problems with Wilsonart 1730 contact adhesive
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/19) -- Is anyone else out there having problems with Wilsonart 1731 (red) or 17 ...

    Re: CNC machining chair bottoms
    A message posted at WOODWEB's Solid Wood Machining Forum (1/19) -- Been there, done that. I bought a Shopbot CNC router with a 4Hp spindle, and can n ...

    Re: Adequacy of shaper for stacked tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (1/19) -- I would set the cope head as low on the spindle as possible, with the profile cutt ...

    Laguna LT1400 3hp bandsaw
    A message posted at WOODWEB's Solid Wood Machining Forum (1/19) -- Delivered today. Guide says 30 amp circuit, but the plug is for 20amp??? I know th ...

    Laminate slitter adjustment
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/19) -- Our shop just purchased a miller-moorehead model 600 slitter. It has a h ...

    Thoughts on the Larick 390 Auto Shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (12/18/23) -- Has anyone purchased a Larick 390 auto shaper for running their sticks in thei ...

    Re: EMA/Casadei shaper spindle bearing replacement
    A message posted at WOODWEB's Solid Wood Machining Forum (12/18/21) -- Bearings are cheap, if you have not found it yet find the bearing place in you ...

    Re: Planer blade height
    A message posted at WOODWEB's Solid Wood Machining Forum (12/18) -- Knife height outside of the cutter body will depend on how the rest of the machin ...

    Diehl Molder Hold downs
    A message posted at WOODWEB's Solid Wood Machining Forum (12/18) -- 1st picture shows the non-spring loaded hold downs on Diehl molder that comes wit ...

    Re: Milling small raised panels
    A message posted at WOODWEB's Solid Wood Machining Forum (12/18) -- Set up the shaper so there is a continuous fence under the top mount cutter (assu ...

    Milling small raised panels
    A message posted at WOODWEB's Solid Wood Machining Forum (12/18) -- Using a 3 Delta shapers setup to make RP doors for a couple local shops. When mak ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/18) -- Todd, i think your Ford vs Chevy is pretty accurate for the Inventor vs Solid Works. Both products ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (12/18) -- First off I think your gauges are first rate and 30 years of setting machines up ...

    Re: Spindle sander
    A message posted at WOODWEB's Solid Wood Machining Forum (12/18) -- I've owned the Jet now for about six years and would buy it again in a heartbeat. ...

    castor on plywood
    A message posted at WOODWEB's Solid Wood Machining Forum (12/18) -- I am a cabinetmaker and I have 4 machines, 2400 pounds (bacci tenoner), 1050 poun ...

    Re: castor on plywood
    A message posted at WOODWEB's Solid Wood Machining Forum (12/18) -- I would suggest a pallet jack to move the machinery around. A pivoting caster und ...

    Re: Spindle sander
    A message posted at WOODWEB's Solid Wood Machining Forum (12/18) -- I Own the General version floor model. No complaints here, it's a nice tool to ha ...

    Re: resawin problem
    A message posted at WOODWEB's Solid Wood Machining Forum (12/18) -- I had a delta 14 for about a week once and found it nearly useless for just about ...

    Re: resawin problem
    A message posted at WOODWEB's Solid Wood Machining Forum (12/18) -- The only way I would resaw 4" or wider hardwood on a 14" band saw would ...

    Re: resawin problem
    A message posted at WOODWEB's Solid Wood Machining Forum (12/18) -- on small band saws it is hard to get enough blade tension and the blade feet per ...

    Re: resawin problem
    A message posted at WOODWEB's Solid Wood Machining Forum (12/18) -- you guys are great help. So before I put good money on top of bad....... Thing is ...

    1/4" Corian over plywood
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/18) -- I am doing a desk or 5 with 1/4" corian laminated to a substrate o ...

    Re: 1/4" Corian over plywood
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/18) -- No contact cement for corian. You have to use either the 2 part epoxy f ...

    Re: 1/4" Corian over plywood
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/18) -- G'day Mate I'd glue up all the corian first then drop over my substrate ...

    Re: Thick moldings
    A message posted at WOODWEB's Solid Wood Machining Forum (11/18/22) -- Rich Thank you for the advise. We are able to locate up to 16/4" Cherry. ...

    Re: Red Elm Cabinet Question
    A message posted at WOODWEB's Cabinetmaking Forum (11/18/21) -- Solid lumber is what true Shaker is all about. Flat panel in the front and back bevel ...

    Re: Passage door astragal
    A message posted at WOODWEB's Solid Wood Machining Forum (11/18) -- Dustin Typically we lay them on their side while milling. We utilized right, left ...

    Re: What shaper - this spindle
    A message posted at WOODWEB's Solid Wood Machining Forum (11/18) -- It looks like an old Davis and Wells one I have but really can't be sure. Try sen ...

    Re: Moulding Miratech (Esterior MDF)
    A message posted at WOODWEB's Solid Wood Machining Forum (11/18) -- Vic You would have to tool up in carbide, preferably a C3 grade, either a euro st ...

    Re: Recently someone posted about edge molding
    A message posted at WOODWEB's Cabinetmaking Forum (11/18) -- Pat, I've run it on large radii. Think bow front on a narrow peninsula top at bar height ...

    Steel City Jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/18) -- Would any one know where to purchase Jointer Knives for a Steel City Jointer now ...

    Re: Choosing right planer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/18) -- I still say take it to someone with the right equipment. 5k board feet is a lot o ...

    Re: Choosing right planer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/18) -- Forgot to mention. We're just doing board and batten. I probably sounded like a r ...

    Freeborn C&S Set
    A message posted at WOODWEB's Solid Wood Machining Forum (11/18) -- I picked up a used 6 piece C&S set (smaller 3/4 Bore type) and had it sharpen ...

    Re: volume gluing-up
    A message posted at WOODWEB's Solid Wood Machining Forum (11/18) -- I have a JLT Clamps foot operated gluing machine for putting glue on the pieces t ...

    Re: Freeborn C&S Set
    A message posted at WOODWEB's Solid Wood Machining Forum (11/18) -- What fits loose? the machined joint or the cutters to your spindle? If it is the ...

    Re: shaper pin
    A message posted at WOODWEB's Solid Wood Machining Forum (11/18) -- almost anything will work. cut the head off a bolt and make your own pin. ...

    Re: Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/18) -- Good morning Dave! The fixture he's using is the 2 bearings on 1 side, and one on ...

    Re: Custom shaper Knives Protruding Slightly Above Head
    A message posted at WOODWEB's Solid Wood Machining Forum (10/18) -- I bought an Innovator head several years ago and it's been great for doing raised ...

    Re: Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/18) -- My first thought is that you are not controlling the work piece completely as it ...

    I am new here
    A message posted at WOODWEB's Solid Wood Machining Forum (10/18) -- Hey all! I am new to this forum and just wanted to introduce myself. My future wo ...

    Re: Scissor lift source
    A message posted at WOODWEB's Solid Wood Machining Forum (10/18) -- Have you looked at industrial recovery services or bid spotter? There are many on ...

    Re: I am new here
    A message posted at WOODWEB's Solid Wood Machining Forum (10/18) -- Be sure to post something after you actually purchase that machine and produce a ...

    Re: Scissor lift source
    A message posted at WOODWEB's Solid Wood Machining Forum (10/18) -- I second the suggestion to buy used; Google 'scissor lifts used/auction'. Suerte! ...

    Re: Weinig Profimat 23
    A message posted at WOODWEB's Solid Wood Machining Forum (10/18) -- Scott, Last year we bought a 4 head molder by Leadermac. Not having any familiari ...

    Re: Weinig Profimat 23
    A message posted at WOODWEB's Solid Wood Machining Forum (10/18) -- I agree Read's opinion Paul is second to none. Many of our clients have worked wi ...

    Re: Weinig Profimat 23
    A message posted at WOODWEB's Solid Wood Machining Forum (10/18) -- thanks for the helpful responses ...

    molding on a 3hp shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (10/18) -- I have a run of several different profiles of maple molding. The most aggressive ...

    Re: Getting Inserts out of helical cutterhead
    A message posted at WOODWEB's Solid Wood Machining Forum (9/18/24) -- Before laying the torch on the head try dribbling penetrating fluid between the ...

    Re: Getting Inserts out of helical cutterhead
    A message posted at WOODWEB's Solid Wood Machining Forum (9/18/24) -- Yeah we have some of the small "two finger" tab type keys for install ...

    Re: Getting Inserts out of helical cutterhead
    A message posted at WOODWEB's Solid Wood Machining Forum (9/18/24) -- We use Torx screwdriver to install then and remove them. If I have trouble to r ...

    Cutterhead measuring
    A message posted at WOODWEB's Solid Wood Machining Forum (9/18/24) -- I have a small Weinig moulder mainly for d4s. We do sometimes run profiles, but ...

    Best cad/Cad program suitable for custom-made furnishings
    A message posted at WOODWEB's CAD Forum (9/18) -- Hello.The question has probably been asked here before but is still testing My name is adam and I'm ...

    table saw motor slows down
    A message posted at WOODWEB's Solid Wood Machining Forum (9/18) -- I have a Powermatic 66 table saw with a 3hp Baldor single phase motor. Sometimes w ...

    Re: table saw motor slows down
    A message posted at WOODWEB's Solid Wood Machining Forum (9/18) -- Dave I hear this sometimes with molders, it generally is the belt tension, you mig ...

    Re: carved panel
    A message posted at WOODWEB's Architectural Woodworking Forum (9/18) -- No. Solid wood that thick needs to be able to expand/contract with changes in ...

    Re: Machining Baseball Billets
    A message posted at WOODWEB's Solid Wood Machining Forum (9/18) -- Are you interested in a final product, or just billets? We run a couple of Wema cn ...

    Re: Machining Baseball Billets
    A message posted at WOODWEB's Solid Wood Machining Forum (9/18) -- This machine will make either the billet or the bat, very easy to program also. ...

    Re: Jointer chatter --- bad bearings?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/18) -- Rich, my apologies. The knives are all within .002 in. of each other, not .02 in. ...

    Re: Wadkin planer
    A message posted at WOODWEB's Solid Wood Machining Forum (9/18) -- Hi Chris: I can check with the factory in England to see what year your planer was ...

    Re: Jointer chatter --- bad bearings?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/18) -- Within .02" is a ton out of alignment. That's more than 1/64". I shoot f ...

    Hitachi cb75F resaw
    A message posted at WOODWEB's Solid Wood Machining Forum (9/18) -- I picked up this used resaw and I am new to resawing. First the blade that comes w ...

    Re: Wadkin planer
    A message posted at WOODWEB's Solid Wood Machining Forum (9/18) -- Try Wadkin North America Fairview NC 336 665 0576 ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/18/21) -- Prices widely vary throughout the country, but Daves post is close to what is c ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/18/21) -- Thanks for the reply Russ. This is the kind of info I am looking for, basically ...

    Re: Epic Corian Failure
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/18) -- WOW. The mere weight of that monolithic top even if it were just sitting ...

    Re: Epic Corian Failure
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/18) -- Is the top restricted by the posts anwhere? ...

    Loss of a good man Chuck Rankin
    A message posted at WOODWEB's Solid Wood Machining Forum (8/18) -- I recently learned that our industry has lost another great man in the woodworking ...

    Re: Loss of a good man Chuck Rankin
    A message posted at WOODWEB's Solid Wood Machining Forum (8/18) -- I have lost track of how many times Chuck answered questions for me. I bought when ...

    Machining Seminar at IWF
    A message posted at WOODWEB's Solid Wood Machining Forum (8/18) -- I will be giving seminars at the IWF show on Wednesday (Measuring Moisture), Thurs ...

    Profilematic V-1003 V-groove Machine
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/18) -- I need help... If you know this machine then you know the Company is no ...

    Gang Rip Saws
    A message posted at WOODWEB's Solid Wood Machining Forum (8/18) -- My company is looking to bring our lumber ripping in house so we need to buy a new ...

    Re: SCM 20" Planer with spiral head
    A message posted at WOODWEB's Solid Wood Machining Forum (7/18/23) -- Yes it is enough. We have a 24" SCM with the same motor it is fine. I gues ...

    S.A. Woods model 99 jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (7/18) -- I'm looking for a height adjustment wheel assembly for this jointer. ...

    Re: Which 26"-32" Thickness Planer for various kind of woods
    A message posted at WOODWEB's Solid Wood Machining Forum (7/18) -- Thickness planer? Isn't the wood already thick? Do you want to make it thinner? Yo ...

    changing a Scmi 5 head moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/18) -- Anyone out there know how to switch my 1984 p170 5 head moulder from 440v to 220v? ...

    change Scmi moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (7/18) -- I have a1984 Scmi 5 head moulder that I need to change from 440v to 220v. Any one ...

    Contact Roller for Wide Belt
    A message posted at WOODWEB's Solid Wood Machining Forum (7/18) -- Contact Roller for Wide Belt Sander Anybody know of a north American Maker of afte ...

    Re: Motor brake for table router.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/18/22) -- That's going to be exciting, braking a motor running at 20,000rpm. Better order ...

    Re: Platen question on widebelt
    A message posted at WOODWEB's Solid Wood Machining Forum (6/18) -- The Surfprep article linked to by Rocket is very useful. Once you have removed any ...

    Laminate for sale
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/18) -- Have 20+ 5x10 sheets of vertical grade Tafisa Sunday Brunch Viva texture ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/18) -- Thanks Jason. I'm a small shop still hoping to get into a machine. Have my eye on a Biesse but wait ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/18) -- Hi Mark, sorry I am using 6.15 (2014). This is the version with many problems. We are weighing up i ...

    Re: taking 2x6x16' to 5/4" x 6 decking on moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (6/18) -- You can calculate that. Multiply cutting knives( non jointed 1) x spindle rpm and ...

    Re: Zodiac Fabrication
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/18) -- Zodiac Fabrication brings the best of nature and science to the best of ...

    Re: edgebanding trimmer recommendations
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/18) -- Compact laminate is a structural laminate by Formica, similar to Trespa ...

    Re: western red cedar checking
    A message posted at WOODWEB's Solid Wood Machining Forum (6/18) -- The extent of checking that you are seeing (based on your note) means that the woo ...

    Re: sharpening moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (5/18/23) -- I have never been able to detect burrs in my knife edge on the scope. I sure ca ...

    Re: Solid wood nesting tooling
    A message posted at WOODWEB's CNC Forum (5/18/22) -- You need a special brazed 2 flute as the standard flutes don't meet and will not plunge cut. You ...

    Re: Grizzly 18-36 Drum SDander
    A message posted at WOODWEB's Solid Wood Machining Forum (5/18) -- yes it is a drum sander I have 4 belt sanders so I know what they are. David sugge ...

    Re: Last bottom knife - really necessary?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/18) -- There are a couple of things to think about as to the use of the last bottom cutte ...

    Re: Solid Panel Cabinet Doors
    A message posted at WOODWEB's Furniture Making Forum (5/18) -- I like to stain and one coat of sealer on the panel before gluing up the frame. I also ...

    Re: Old Planer machine shooting "bullets"
    A message posted at WOODWEB's Solid Wood Machining Forum (5/18) -- Perhaps you should not allow ammunition to enter the machine, then it would have n ...

    electronic scheme for bacci
    A message posted at WOODWEB's Solid Wood Machining Forum (5/18) -- Does anyone has electronic scheme for Bacci machine TSD/E 406 ...

    Re: electronic scheme for bacci
    A message posted at WOODWEB's Solid Wood Machining Forum (5/18) -- Yes. ...

    upcut saw blade
    A message posted at WOODWEB's Solid Wood Machining Forum (5/18) -- I'm looking for some recommendations on a 14" upcut saw blade for a new to me ...

    Shape and Sand tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (5/18) -- I bought a Crouch shape and sand machine back on April 6th. I'm still waiting on t ...

    Re: I have to make my own moulder knives. What's the best way?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/18) -- You might want to check your rpm. Too slow will eat up a wheel fast. ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/18) -- I agree that using ipe when glue is required for joining is not a good idea. ...

    stained wood edge laminate counter
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/18) -- I'm making some desk tops for a customer out of a dark walnut style Form ...

    SCMI MiniMax WIN CS63 Bed Adjustment
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18/24) -- I recently purchased a WIN CS63 at auction and am having some bed alignment iss ...

    Oliver 166 CD
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18/24) -- Hi all, this is my 1st post. I recently purchased an Oliver 166 CD jointer and ...

    Re: Scalloped drawer fronts
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18) -- 55" can add up. The strategy would be to use quarter sawn stock for the verti ...

    Scalloped drawer fronts
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18) -- Looking for some feed back on fabricating the drawer fronts in this image. I do no ...

    Re: Scalloped drawer fronts
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18) -- Thanks David. The 55" is the total length of the piece so the drawer fronts w ...

    Re: Scalloped drawer fronts
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18) -- Forgot the picture.... This is drawer with a single front french dovetailed to the ...

    Re: Scalloped drawer fronts
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18) -- I'd have a custom router bit made and rout the scallops using a custom jig to chan ...

    Re: Northtech shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18) -- I made mine using a piece of 3/8" thick aluminum. cut close on a band saw and ...

    Porter Cable laminate trimmers
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/18) -- Does anyone know if Porter Cable still makes a laminate trim router with ...

    Re: Parts for SAC TS-120 Shaper?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18) -- I believe I saw a blurb that these folks had a SAC parts inventory. http://www.pro ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18) -- I agree with the dull knifes. This would include a knife that has been jointed too ...

    Re: Track Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18) -- Safety Speed Cut makes a down sized panel saw for tight space situations. It has t ...

    Re: Track Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18) -- I have the Grizzly that I got just for a one-off project. Burned the motor up on a ...

    Re: Track Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18) -- Power and precision are two things low on my list for this project. We're cutting ...

    Re: Track Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/18) -- A panel saw was my first thought, but I'm not sure I want to give up the real esta ...

    Re: Source for prelaminated panels with realistic faux walnut?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/18/23) -- Have you looked at Wilsonart “Aligned” texture collection, they have ...

    Re: Need a new (or used) shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18/23) -- Thanks Karl, I've been watching numerous auctions, craigslist, facebook market ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18/22) -- Nope, 30-38ish FPM unless jointed. Your biggest enemy to tool life is heat, roc ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18/22) -- Thanks for the info Troy. If you add a third knife to help with tear out on the ...

    Re: wide belt sander trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18/22) -- If the abrasive belt deviates, the damaged parts should be replaced in time to ...

    Re: wide belt sander trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18/22) -- Your Powermatic has an electronic eye? Mine is 1997 model with air eye. ...

    Accessories for Cross Cut Sleds
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18) -- I've been using crosscut sleds for many years but never bothered with fancy stuff ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18) -- We do need separate in and out feed fences, as most of the time we are actually re ...

    Re: Pre-mil
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/18) -- The edgebander I have dosent look like there is room for a premill unit. ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18) -- A repair may be as simple as reaming out any oversized holes and having bronze bus ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18) -- We use an outside fence when practical. Kind of hard to use for stair treads with ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18) -- I'm a big fan of an outboard fence when removing material ...

    Laminating using hydraulic press + Radio Frequency
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/18) -- Hello everyone, I'm a french furniture maker. I use a hydraulic veneer p ...

    Re: S4S Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18) -- I've never seen or heard of a molder and cut off saw combination machine. That sou ...

    Re: Straight line Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18) -- I have found the rip saw will do glue line with a good blade but if you try to go ...

    Re: Straight line Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18) -- I too was considering a SLR saw for my shop but I was running out of space. I ende ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18) -- I work in Australia now. They of course follow the UK ways in most things. They on ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/18) -- I'm figuring out that a machine is "good quality" if it holds alignment ...

    Re: Cabinetvision screen to machine
    A message posted at WOODWEB's CAD Forum (3/18) -- KD, thanks for the input. I figured that this had been done many times before and that we would not ...

    Molding/Shaper Knives
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18/23) -- I need to settle an age old technique argument that has persisted over the year ...

    Re: For those who really know widebelts
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18/23) -- I have Bill, we dressed it a few times but when we bought it (used) it was ran ...

    Re: Resaw bandsaw blade sharpening service
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18/22) -- Re: Manitowoc Saw - I think they are gone. They used to do our 3-1/2" wide ...

    Re: Seeking Shaker passage door shaper cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- Look at Woodweb's home page. You will find what you are looking for under will get ...

    Re: Wood Species?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- The top rail looks like poplar to me. The rest, I don't know. ...

    Re: Metal Detector For Staples!
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- www.moulderservices.com. Has the info on the DGK material Be safe Dr. David Rankin ...

    Re: Training an employee on CNC -Cad/Cam
    A message posted at WOODWEB's Business and Management Forum (2/18) -- Our cnc operator is expected to do almost exactly what Larry has described. Thi ...

    HMT laminating system problems
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/18) -- We are running the HMT advantage plus laminator. When the panel is fed i ...

    Re: Solid Core Doors
    A message posted at WOODWEB's WOODnetWORK Forum (2/18) -- I work with a door manufacturer's rep in western Pennsylvania that could help you buy direc ...

    Re: extra height on a Weinig
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- Kim Perhaps I did not fully explain myself, what I meant on custom is you could no ...

    Re: extra height on a Weinig
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- I just took a peak on exfactory and there are actually several Weinig machines wit ...

    Re: extra height on a Weinig
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- Kim The dust collection hoods and safety covers come into play here, to get taller ...

    Re: extra height on a Weinig
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- I will call them. I was wondering if it was a matter of just adding a taller spind ...

    Re: Sliding Dovetail in Solid Material
    A message posted at WOODWEB's Furniture Making Forum (2/18) -- The reason everyone is recommending a sliding tapered dovetail is that getting a flawl ...

    Re: desparately need a resaw solution
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- the other issue with a band (besides tension) is surface feet per minute. the opti ...

    jointer question
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- Has anyone purchased a new jointer table/cutter without any kind of stand or motor ...

    Re: jointer question
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- I've got a Jet JJ6 6" mounted to a wood table, pully drops down to a motor on ...

    Re: Sliding Dovetail in Solid Material
    A message posted at WOODWEB's Furniture Making Forum (2/18) -- I'm starting to re-think this and am considering a half dovetail combined with a dado. ...

    Re: Is it possible to thermoforming with industrial heat blanket?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/18) -- what material, how large, how big is the "blanket" in a nut sh ...

    Re: Sliding Dovetail in Solid Material
    A message posted at WOODWEB's Furniture Making Forum (2/18) -- finewoodworking did an article on a tapered sliding dovetail a few years back. as I re ...

    Re: Hitachi resaw blade sharpening
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- my local saw shop does bands but not sure about the carbide. the ones I see in the ...

    Hitachi resaw blade sharpening
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- Does anyone know where I can get my 3" wide Hitachi carbide tipped resaw blad ...

    Re: jointer question
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- What is a table cutter? What kind - make, model - of jointer do you have? ...

    Re: Hitachi resaw blade sharpening
    A message posted at WOODWEB's Solid Wood Machining Forum (2/18) -- I checked with my sharpener and he is not set up to do it. ...

    Re: Shaper parts help
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18/24) -- If its just the cable thats broken you should be able to get it relatively easy ...

    Manufacturing Wide Plank Flooring
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18/23) -- Does anyone want to manufacture and sell wide plank flooring from our facility ...

    RE: Machines for Manufacturing Flooring
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18/23) -- Which flooring machine is best for manufacturing raw wood to wide plank floorin ...

    Re: Mini Max jointer/planer motor problem
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18) -- Capacitor is blown and oil leaked out, install the same size and rock on. Worst ca ...

    Re: Chinese CNC routers??
    A message posted at WOODWEB's CNC Forum (1/18) -- I completely disagree, most Cnc routers are the same layout, Servo, drives, and 3 axis ,,,why blow ...

    Re: AutoCAD 3D
    A message posted at WOODWEB's CAD Forum (1/18) -- For production Case work Cabinet Vision or Microvellum are the go to for popularity and probably ef ...

    Re: AutoCAD 3D
    A message posted at WOODWEB's CAD Forum (1/18) -- It would be difficult in Auto Cad or Solid Works for that matter. My objection is when a new hire i ...

    Re: CNC machining chair bottoms
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18) -- Use? No. Buy? Maybe. If you need to pay a designer to do the 3d surfacing model fo ...

    Re: First cut on a straight line rip
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18) -- A rough analogy is the fence is a planer and without the fence is a jointer. If yo ...

    Re: Adequacy of shaper for stacked tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18) -- Most shaper spindles are stackable. 1'' should be adequate for that size stack and ...

    Re: A Suggestion For The Woodweb
    A message posted at WOODWEB's Solid Wood Machining Forum (1/18) -- This is a good suggestion. Thumbs up also! ...

    Re: Stainless steel laminated to baltic birch
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/17/21) -- What was the thickness of the steel that you used? Thanks! ...

    Re: Jointer Setup
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17/21) -- The value of safety Z height and origin height can be set through the tool pat ...

    swing-chisel mortiser
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- I spent a while searching for a used chisel mortiser for my startup-production li ...

    looking for a machine
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- We have an old holzer edgebander that we have retrofit several times to do what w ...

    Re: Oliver 4920 SLR
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- I have the Powermatic version of this saw, have had it for almost 15 years. Run t ...

    Re: Laminate Undermounts
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/17) -- Larry, I saw this a lot when I was working overseas. They would cut the ...

    Re: Laminate Undermounts
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/17) -- We've done a lot of these. There are generally two methods to do this. ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- Rick L- My gauges are useless and they make you cringe. Got it. Thanks so much. J ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/17) -- Todd, For some time we drew mostly in 3d AutoCad along with Smartlister to extrude the part inform ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- Andrew L— Much as it surprised me, when I tried a paten made the same way it didn ...

    Re: Spindle shaper bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- Sounds like you may be too far along already, but I would re-think having a bunch ...

    Re: Solidworks vs Inventor =%20Ford vs Chevy?
    A message posted at WOODWEB's CAD Forum (12/17) -- As you already have AutoCad and 3dsMax, you may want to look into the AutoDesk Product Design Suit ...

    Spindle sander
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- A pending bid is prompting me to consider an oscillating spindle sander. I would ...

    Re: resawin problem
    A message posted at WOODWEB's Solid Wood Machining Forum (12/17) -- There is likely be no problem upgrading to a 2hp motor on the band saw. However y ...

    Re: Hydrolock moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17/25) -- You typically grease both outer fittings, as they service bearings on each end ...

    Thick moldings
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17/22) -- Hi All We are looking at a large commercial project that requires 12/4" a ...

    Re: Thick moldings
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17/22) -- Some drawings showing the profiles would help, but no way would I hang that th ...

    Re: Original manufacturer?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17/21) -- I suggest you ask at the link. With the quality of the castings, it almost loo ...

    Re: Original manufacturer?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17/21) -- Trupro Machinery out of Taiwan ...

    Re: Cutting wine rack lattice safely and efficiently
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- I would figure out the bandsaw issue. We cut these quite a bit and have found tha ...

    Re: Cutting wine rack lattice safely and efficiently
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- Thanks guys, we're going to try this with the Festool trak saw. We have a couple ...

    Re: Sliding table saw parts swap.
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- Congratulations!! ...

    Re: Flooring with Circle Saw Milling Marks
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- Circular sawn flooring is pretty much a hit or miss floor so side match..there wi ...

    Flooring with Circle Saw Milling Marks
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- Hi there! We make custom hardwood flooring (up to eight inches wide), and have be ...

    Decorative edging for headboards
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/17) -- Hello, I'm working on a project and looking for trim or edging to go on ...

    Re: Flooring with Circle Saw Milling Marks
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- Here is something to start with. ...

    Choosing right planer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- I need advice on choosing the correct planer for my situation. I am not a seasone ...

    Re: Blades for sliding table saw
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- We use: Hardwood blade Leitz 58057 300 x 3,2 / 2,2 x 30 HW Z48/19,63 $109 Plywood ...

    Re: Choosing right planer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/17) -- Take it to someone with the right equipment. To make proper siding it probably ne ...

    Re: Which is the best woodworking software program?
    A message posted at WOODWEB's Architectural Woodworking Forum (10/17) -- There are many woodworking software is in the top list like Solid works, Aut ...

    Re: Wood Filler with laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/17) -- Bondo is the only way to go. Don't waste your time with anything else ...

    Re: 1/8" lumber veneer S2S?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/17) -- We do not do any glue up that thin. However, we do run 4/4 stock throug ...

    Re: 1/8" lumber veneer S2S?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/17) -- We rip our boards with a Diehl saw, resaw the boards with the Baker. Ba ...

    Re: 1/8" lumber veneer S2S?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/17) -- Thanks for the reply. So you don't have any issues with the edge that t ...

    Re: 1/8" lumber veneer S2S?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/17) -- 1/8" is fine on the jointer. I'd machine it just like 4/4. ...

    Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- Hello all! The problem we're having is when cutting arched planton frames on our ...

    Re: SCMI S63 planer
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- I always call my electrician in for this kind of problem. Takes him less than 10 ...

    Re: Problem with knife on W&H
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- I forgot to mention, the profile is a half round 3/8" thick 1" wide. ...

    Re: Weinig Profimat 23
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- Scott FYI The Weinig R-925 is one of the most temperamental profile grinders ever ...

    Re: Weinig molders and carbide insert tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- Typical cutter head hook angles on a Weinig moulder are either 12 or 20 degree. T ...

    Re: Weinig molders and carbide insert tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- Whoops--That should read PS. Listen to the people in the below post from a few da ...

    dominion midas moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (10/17) -- restoring 1987 5 head moulder. 1 spindle appears to need new bearings, so anyone ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (10/17) -- I've posted many times about Topsolid. We have Topsolid Design in which we do our layout/shop draw ...

    Laminate Inlay Techniques
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/17) -- I have attached a picture of some media stations and columns that I wil ...

    Getting Inserts out of helical cutterhead
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17/24) -- Much to our disappointment we discovered today that a team member who is no lon ...

    Re: Getting Inserts out of helical cutterhead
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17/24) -- I've had a similar situation, used molder head. Ended up drilling the screws an ...

    Re: Getting Inserts out of helical cutterhead
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17/24) -- Get replacement screws Fight the old ones out. Put the knew ones in with a torq ...

    Ss
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/17/23) -- Did solidsurface.com close? Cant get thru to website. ...

    Re: Panel cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- Alex I have one very close to what you're looking for but could easily make a 5/16 ...

    Jointer chatter --- bad bearings?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- I recently purchases a used SCMI F3A 12" jointer. This is a 3 knife, non-ters ...

    Re: Brushable Lacquer Recipe
    A message posted at WOODWEB's Finishing Forum (9/17) -- Hey thanks for the response, Robert. I was trying to avoid an explanation, but maybe it would ...

    Wadkin planer
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- I just got a wadkin 24" planer, Model BAJ 70225. Does anyone know how old thi ...

    Re: Wood Glide lubricant
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- Just a minor follow up to my earlier question, Par/Woodglide has moved recently an ...

    Shelix -- Made In Usa
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- I have done some internet research on upgrading my planer to the shelix style head ...

    Re: Wood Glide lubricant
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- Hi Bill: The MBL-40 can be applied using a hand sprayer and putting a light applic ...

    Re: 2 pc MDF doors in Cabinet Vision
    A message posted at WOODWEB's CAD Forum (9/17) -- Bob, You could use door maker in your Door Catalog Editor to make the door you want. You would have ...

    Re: SHELIX -- MADE IN USA
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- You need to contact Byrd Tool. They manufacture the Shelix cutter head here in the ...

    Re: Wood Glide lubricant
    A message posted at WOODWEB's Solid Wood Machining Forum (9/17) -- I have a question. How is it applied to a machine other that a molder? ...

    Corian Ash Concrete Adhisive needed
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/17/23) -- Hi everyone, I am in desperate need of adhesive to match Ash Concrete ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17/21) -- In the 1980's a shop I ran charged an even $100, with a $50 an hour labor rate. ...

    Re: Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17/21) -- Thanks for the reply David, much appreciated. Anyone else have any input? ...

    Epic Corian Failure
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/17) -- Hello everyone, this is an outdoor, direct sunlight Corian application. ...

    Re: RE: Grit of wood using a Planer
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- As to who makes the best knives, that depends on what kind of head it has. Tersa? ...

    Re: 12" table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- I haven't used many table saws, but I can attest that the dewalt saws have an amaz ...

    Re: better (older) rip saw - mattison or diehl?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Loved my Mattison 202, a very accurate glue joint but the chain wore out . replace ...

    Widebelt thickness
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- are there any manufacturers who make a wide belt sander with a thickness capabilit ...

    Re: Spiral carbide dovetail bit?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Hi Andrew, the machine you have there uses an eccentric dovetail bit (the spindle ...

    Shaper cutter for 5/16" bead
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Does anyone know where I can get a 3/4" bore shaper cutter with a 5/16" ...

    Re: Shaper cutter for 5/16" bead
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- These aren't the best, but they stock them. Believe it's the right size... https:/ ...

    Re: Spiral carbide dovetail bit?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Will any of the Vortex bits fit your machine? If not, I bet they can make you one. ...

    Re: Shaper cutter for 5/16" bead
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Add a power feeder on your router table and get the router bit. I love having a po ...

    Tormek t-8 White Mineral Oil Alternative
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Dear experts, could I use car lubrication oil for Engine instead? Thank you. ...

    Re: new shapers
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Look at adding a VFD to your shaper and you can make any speed you need to match t ...

    Adjusting tables on an scmi f 410
    A message posted at WOODWEB's Solid Wood Machining Forum (8/17) -- Just picked up a 1997 F-410 and need to adjust the tables. No info in the download ...

    Re: Corner rounding 3mm PVC
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/17) -- there is no bearing on the bottom of the bit for a machne like this. it ...

    Re: Beaded Frames
    A message posted at WOODWEB's Solid Wood Machining Forum (7/17/24) -- I don’t do much cabinetry any more but was in an East coast shop a few years ag ...

    Reducing Power Feed Speed
    A message posted at WOODWEB's Solid Wood Machining Forum (7/17) -- I have a Holz power feed that is built like a tank but it runs a little too fast f ...

    Re: weinig quattromat 22
    A message posted at WOODWEB's Solid Wood Machining Forum (7/17) -- Hello all problem solved. Thank you so much for the replies and the e mails as wel ...

    Re: weinig quattromat 22
    A message posted at WOODWEB's Solid Wood Machining Forum (7/17) -- I would call Weinig, In my recollection the quattromat should have a rebate cutter ...

    Scm Si400 Nova
    A message posted at WOODWEB's Solid Wood Machining Forum (7/17) -- we are looking to buy this machine we are a small shop and have maybe 2 hours for ...

    Avonite gloss finish
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/17) -- We are finishing Avonite (very black with little pattern) countertops to ...

    Re: Avonite gloss finish
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/17) -- For what it's worth we had a job with black Corian and could not get a d ...

    Corian
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/17/25) -- Has anyone used a half lap joint to seam Corian I tried it and seams ...

    Re: Looking For A Finishing Consult
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/17/24) -- You can contact me if you like, retired chemical coatings engineer, i ...

    Re: Moulding Mahogany
    A message posted at WOODWEB's Solid Wood Machining Forum (6/17/24) -- Plus don't be surprised if you get a lot of surface fuzz with the Af. Mahog. An ...

    Re: Hook angle vs cutting angle results?
    A message posted at WOODWEB's Solid Wood Machining Forum (6/17/22) -- Thanks for the replies! It turns out I wasn't understanding the tool maker prop ...

    Re: Motor brake for table router.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/17/22) -- A miter saw switch disconnects the power while shorting out the motor. The shor ...

    Motor brake for table router.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/17/22) -- How can I build a 110v motor brake for a 1.75hp table router. I want the router ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- With Smartlister the changes are much easier than it would be otherwise in Auto Cad. I was wonderin ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- I'm sure SW has come a long way since I last used it. But for me getting parts out trumps the rest. ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- Thanks Jason. I'm using Topsolid Design 2013 6.14 and haven't had much of a crashing issue like you ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- I suspect he's using local parametrics but I'm not sure. Keep in mind that the parametics that he i ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- On a related note, when I ask him to make changes to a drawing it might take minutes. When I asked ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- The software is TS Wood 6.14, I believe that the current version is 6.16. The software vendor wants ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- That is interesting. Are you talking about global parametrics as with CV or local parametrics as wi ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- Just curious as that indicates the learning curve for your SW draftsman. Did have previous cabinet ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- Pat, I feel like it has to be from 2 years ago, but I might be mistaken ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- Jason, Can I ask what version of Topsolid Wood you are using? ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- Thanks Derek That is impressive. Machine code still from CV? ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- He can make global door style changes, I know that much. ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- What year was this thread from? ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/17) -- Yes. ...

    Re: Placing your cut on an upcut saw
    A message posted at WOODWEB's Solid Wood Machining Forum (6/17) -- We had the identical saw, concerns, and problem solving scenario. I gave up on the ...

    taking 2x6x16' to 5/4" x 6 decking on moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (6/17) -- Guys, Any idea for knife marks per inch for running 5/4" premium decking out ...

    Re: sharpening moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17/23) -- Are you using a scope to inspect your knives? I have found you can actually see ...

    Re: Solid wood nesting tooling
    A message posted at WOODWEB's CNC Forum (5/17/22) -- If so, my apologies to Acctek. ...

    Re: Grizzly 18-36 Drum SDander
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Thanks for your response. Do you have a preference on the belt manufacture?. Yes I ...

    Re: Grizzly 18-36 Drum SDander
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- So do you really have a drum sander, or do you have a belt sander? Why would you n ...

    Re: Wide belt sander drum repair
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Curious how the drum turned out. There is a huge difference in a shop that does ro ...

    Re: threaded shank brad point bits
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- usroutertools.com ...

    Re: Butfering Planer/Sander Eating Belts
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Just wanted to give an update. I looks like the sensor eye had migrated to the dri ...

    Re: Butfering Planer/Sander Eating Belts
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Thanks for reporting back. ...

    Re: Dovetail Machines....
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Check out the Dodds, I've been happy for years with it ...

    Re: Last bottom knife - really necessary?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- "We hand-plane and sand the face anyway" In that (or similar) case only, ...

    Re: Old Planer machine shooting "bullets"
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- I need to hammer the top cover every 30 minutes.. According to my teacher, it is b ...

    Re: Old Planer machine shooting "bullets"
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- That's a good question. ...

    Re: Old Planer machine shooting "bullets"
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Got a video? ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Edge glue verticals. Cut slot in top and bottom plus rails for a spline stopp ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Thanks Brian, I am really concerned that there is not enough holding this doo ...

    Re: Chipping/splitting on edge of casing, American beech
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Great information on this post,I would agree with the doctor on over dried wood. M ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Gluing the doors in the 4 corners is more then adequate. With splines of this ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Got it. I'm kinda embarrassed that I actually said I could glue all of the pl ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- You could run the styles into the depth of the mortise. The main reason for n ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- We did a house full of this type door a few years ago. We used square edge co ...

    Re: Chipping/splitting on edge of casing, American beech
    A message posted at WOODWEB's Solid Wood Machining Forum (5/17) -- Also I have one more question, are you using a custom pressure shoe on this profil ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Sorry, I can not figure out how to post a link in-line or edit my post. The l ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- Thanks, Here's a drawing of what I think you meant. Is this right? The dark r ...

    Re: countertop help
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/17) -- Make the top in one piece itself and use a natural looking material for ...

    Re: Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/17) -- I forgot to mention I would never use Ipe for anything like this. Its not an ...

    Re: Gluepot cleaning / repair
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/17/25) -- If you only need it cleaned you can do that yourself. I have had to c ...

    Re: Water cooled spindle in router table?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17/24) -- Pick up a Porter Cable 690 router. Either new or used. They basically last fore ...

    Running curved stock on molder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17/23) -- So we have our molding machine running very well now good knives good feed rate ...

    Re: What does your shop use for crosscutting face frame stock?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17/23) -- I have a CTD saw and biesemeyer fence and stop Very well built saw. Flip it on ...

    Kolle Formatic table Schematics
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- We're looking for schematics for our Kolle Formatic sliding table saw. Blade raisi ...

    Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- I have a Unimat 218 6 head moulder that I am having a lot of trouble with chatter. ...

    Track Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- We do a fair amount of custom crate building for shipping items by common carrier. ...

    Re: Track Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- I've never used the Shop Fox, but do use the Festool, who pioneered this type of s ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- I can't say why, if I could I probably would have found the problem much sooner, I ...

    Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/17) -- Do you use a mobile device? If so, do you use any woodworking apps? Let ...

    Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Do you use a mobile device? If so, do you use any woodworking apps? Let us know by ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Ok, I guess I'm going to answer my own question. After a day and a half of trying ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Can you explain why dull knives in one head produce this pattern? If sharpening or ...

    Re: Track Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- A used Safety Speed Cut panel saw would be just about your best solution. The saw ...

    Makita 9 1/4" Circular Saw Serious problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- This circular cannot cut perfectly 90 degree, but with serious distortion of 90 de ...

    Re: Moulder Chatter
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Glad you figured it out. That was going to be my suggestion as well. We recently h ...

    Re: Track Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- I made a track saw, and it works quite well. then i combine track saw with 90 degr ...

    Re: WIDE BELT SANDER INFO
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Adam, Save me the time from talking to the abrasives people. With a 80-120 sequenc ...

    Re: Original 3-1/4 HP Plunge Router Flush Bit
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- Can you post a picture of your bit? ...

    Re: Track Saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- There is another brand of similar saw on Ebay now. BH Davis ...

    SAC Planer problem Table Lift
    A message posted at WOODWEB's Solid Wood Machining Forum (4/17) -- I acquired new 05 model 20" SAC planer and can't get the table to move. It wa ...

    Cabinet vision 2012 latest version
    A message posted at WOODWEB's CAD Forum (4/17) -- I have Cabinet Vision version Solid_7_1_1_113 and looks that when i go to 3-D mode computer running ...

    Re: Cabinet vision 2012 latest version
    A message posted at WOODWEB's CAD Forum (4/17) -- CV Solid 2012 R2 Version 7.1.1.113 That is the last update done for this version. ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/25) -- Thank you all for responding. I already did everything you have mentioned. The ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/25) -- It has been several years since I had a Weinig tech come to the shop to go over ...

    Re: Need a new (or used) shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/23) -- Powermatic shapers are too expensive and only suited for light duty work. Light ...

    Re: Need a new (or used) shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/23) -- If I were shopping for new shapers, I would only look at machines that used an ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/22) -- 35 year Millwork veteran running everything from Diehl push feeds (square heads ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/22) -- Hello Chris There are advantages to having more than two pockets on a cutter he ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/22) -- Thanks Russ, I was hoping you’d chime in. Unrelated to this topic, and likely d ...

    Re: Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17/22) -- Profimat entry level Unimat medium production level Hydromat heavy production. ...

    Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- We have a 40 year old Rockwell/SCMI T120C shaper. It has had a very long and prett ...

    Re: Replacement Shaper Fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- David Waldman: For the shaper that I own I made a plywood fence that ran the full ...

    Re: Pre-mil
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/17) -- Your bander may have an empty space where you can add a premill station ...

    Re: Adjusting wide belt sander bed
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- Critical thought for a 4 post leveling: Locate the four jack points on the top of ...

    Re: Fusion 360 Pros and Cons
    A message posted at WOODWEB's CNC Forum (3/17) -- Matt, Like you, I'm a long time MV user. Also, about a year ago, I had an odd project I decided to ...

    Re: Adjusting wide belt sander bed
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- 2 post leveling is simpler, but there may be a mechanism/adjustment for front/back ...

    Re: Adjusting wide belt sander bed
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- Ok that all sounds good. I will attempt all this today. Sorry I did not post pics ...

    Re: Straight line Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- An SLR is for prepping molder blanks or prepping edges for gluing. It is a rough m ...

    Straight line Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- Hello All I'm looking to add a Straight line to my Cabinet shop, we do most Face f ...

    Re: Straight line Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- It is very difficult to maintain a tight tolerance on a rip off a SLR in my experi ...

    Re: Tall oversized raised panels
    A message posted at WOODWEB's Cabinetmaking Forum (3/17) -- I think you are setting yourself up for failure. 30" panels are going to move, a goo ...

    Re: Using tooling after a FIRE
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- So in this post you're asking for opinions please keep in mind that's only what I ...

    Re: Using tooling after a FIRE
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- I would have to agree with Russ, use the insurance if possible. Silver braze alloy ...

    Re: Using tooling after a FIRE
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- I agree with the past firefighter, although I have no idea what that is, nor what ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- David, I often use the sliding saw as a straight lining method with a ripping shoe ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- "The workpiece is wedged under the shoe and held down by hand or clamped at t ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- David, you are certainly right to say that a straightline rip saw is more producti ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- While the dimension saw can be used to straight line lumber I don't find it ideal ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- Phil, after reading one of your earlier posts regarding typical British shop equip ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- The terminology difference is interesting. Mathematically a plane is a smooth surf ...

    Re: Help! Looking Owner Manual Lobo CS-4045M
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- Good luck. I will never buy another Lobo machine. We bought a lineal profile sande ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- "While the dimension saw..." I'm guessing that is a UK term for a table ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- "why take the risk when within a dozen steps ...are a sliding table saw? ...c ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/17) -- Sorry, by dimension saw I mean sliding saw, in England the jointer is the planer a ...

    Re: Blown U joints in molder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/17/26) -- I’d pull the broken ones and measure cap diameter and overall width, then take ...

    Re: For those who really know widebelts
    A message posted at WOODWEB's Solid Wood Machining Forum (2/17/23) -- Have you tried gluing an old sanding belt to a piece of plywood and dressing th ...

    Re: resource for basic shaper speed/feed info?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/17) -- I have found that everyone professionally engaged with the design, engineering and ...

    Re: Corian Sinks
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/17) -- This may help https://betterleytools.com/content/betterley_catalog.pdf ...

    Re: Metal Detector For Staples!
    A message posted at WOODWEB's Solid Wood Machining Forum (2/17) -- It is true that carbide does not have as sharp of a cutting edge as HSS. For many ...

    Re: Metal Detector For Staples!
    A message posted at WOODWEB's Solid Wood Machining Forum (2/17) -- David, I've heard carbide knives aren't as sharp as regular steel knives, and ther ...

    Re: Metal Detector For Staples!
    A message posted at WOODWEB's Solid Wood Machining Forum (2/17) -- Do you have a link for those DGK knives? When I google it all I see is Dirty Ghett ...

    Re: Solid Core Doors
    A message posted at WOODWEB's WOODnetWORK Forum (2/17) -- Algoma hardwoods is my supplier, used them for years. they will ship LTL www.algomahardwood ...

    Re: desparately need a resaw solution
    A message posted at WOODWEB's Solid Wood Machining Forum (2/17) -- I'm going to go another direction and say your blade is dull already. If your usin ...

    Sliding Dovetail in Solid Material
    A message posted at WOODWEB's Furniture Making Forum (2/17) -- I'm in the design process on a cabinet that'll be made of 1 1/8" thick Sapele. I ...

    Re: Molder for reclaimed T&G
    A message posted at WOODWEB's Solid Wood Machining Forum (2/17) -- Alex A few things to think about, I would recommend you run the profile face down, ...

    Is it possible to thermoforming with industrial heat blanket?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/17) -- Just wondering if its possible. ...

    Re: Shaper parts help
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17/24) -- This stuff is like throttle cable or rotary control cable, you can buy it in st ...

    Re: Advice on Planer Purchase
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17/23) -- Jon, back to your original question. I just finished rotating the inserts on my ...

    Re: Buying a Widebelt - what to check
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17/23) -- Brent I noticed you didn't mention the brand of machine. I work on widebelt san ...

    Re: Wide Belt sander platen material
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17/23) -- If you haven't got this all worked out just send me a message and I'll walk you ...

    Sliding table shapers
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17) -- Question for you guys- Some of the shops that I have worked out of, I have used a ...

    Re: Altendorf choice dilemma
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17) -- I'd go for the F45. Less money and will do the job nicely. In the long run a manua ...

    Re: Table saw vs. Straight line rip saw
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17) -- To address your original question. Yes, get a SLR. You will be amazed at what it c ...

    Re: Multi head moulder SOP or guidebooks
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17) -- I have determined that running a 4-sided moulder is more art than science. You mig ...

    Re: looking for discontinuted sheet of Laminart
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/17) -- Adam did you ask the rep? I am sure he knows who the pack rat is out the ...

    Re: AutoCAD 3D
    A message posted at WOODWEB's CAD Forum (1/17) -- Here is an example of when AutoCAD may not be sufficient for product design. I had to get a few lig ...

    CNC machining chair bottoms
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17) -- Just got a commission for a set of dining room chairs out of walnut. The last set ...

    Adequacy of shaper for stacked tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17) -- I would like to stack two shaper heads for doing coping on a 1 inch spindle 5HP 3 ...

    Re: T&G Shaper Cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17) -- 3/4" spindle and 1-1/2" thick material is about the limit anyone would w ...

    Re: T&G Shaper Cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17) -- Sean We have many styles available for 1-1/2" thickness, it would require a s ...

    Re: T&G Shaper Cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17) -- I would agree a 1/4" bore bushed to 3/4 insert cutter would be best. Furtherm ...

    Re: A more heavy duty sander than a jet 22-44 for small parts production?
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17) -- I have a Powermatic dual drum sander. As a furniture maker I don't use it on a pro ...

    Re: T&G Shaper Cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17) -- Sean I may have placed the wrong link below, lets try this one. If it fails to wor ...

    Re: T&G Shaper Cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (1/17) -- You may find the spindle size will be larger than 3/4" , so you use bushings ...

    Cracked Granite
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/17) -- Hello, Take a look at the attached photo. It is a cracked piece of grani ...

    Re: Buying a Widebelt - what to check
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16/22) -- If I couldn't see it run, I'd be offering scrap value. Could be a nightmare, m ...

    Re: Horizontal Boring Machines
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- Hi Fred, Did you ask Greg for names of people using Soukup machinery? I know of 5 ...

    Re: Horizontal Boring Machines
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- Hi Goff, We are interested as well to hear if there is actually anybody (in North ...

    Re: Ritter R-23 Spindle Drill Manual
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- WOW,how sad great company from the owner done I have the same machine been in bus ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- Just thinking about this machine's mechanical design VS traditional raise the bed ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- My first planer was a 1919 Fay & Eagan with babbitt bearings. It had almost 1 ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- You are talking about the cutterhead being out about 1/64"over its width. Ca ...

    Re: Spindle shaper bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- Lesson learned, but unfortunately I'm stuck with what I've got. I picked up an OE ...

    Tear out on birch
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- I am using a lot of birch and am running the ends on my double end machine. The j ...

    Re: Spindle shaper bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- I'm not sure the roller bearing is a good idea. Every quill assembly I've had apa ...

    Re: Spindle shaper bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- You might be right Larry. I'm not sure how much the lower bearing contributes to ...

    Re: Spindle shaper bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- Jeff is right on. The PM is a low priced Chinese machine. Generally you can find ...

    Re: Spindle shaper bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- Sounds right, but that seems like a very low pre-load. Some of the assemblies I'v ...

    Re: Spindle shaper bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- Let me quote your first post. Jeff is right on. The PM is a low priced Chinese ma ...

    Re: resawin problem
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- What material are you trying to resaw? How wide is the material? What blade? What ...

    Re: resawin problem
    A message posted at WOODWEB's Solid Wood Machining Forum (12/16) -- no doubt its the 1 hp motor so I was wondering if I can replace it with a 2 hp in ...

    Original manufacturer?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/16/21) -- Any idea who manufactured this wood lathe? ...

    Re: General 25 " Dual Drum Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (11/16) -- I am not sure where you are located, but a lot of the companies that sell electri ...

    Re: Perske 3 phase motor 230/460 V
    A message posted at WOODWEB's Solid Wood Machining Forum (11/16) -- Don't use a static converter. You have the wrong application. Also I think you wi ...

    What shaper - this spindle
    A message posted at WOODWEB's Solid Wood Machining Forum (11/16) -- Does anyone recognize what shaper this 1" spindle fits in? Thanks ...

    Cutting wine rack lattice safely and efficiently
    A message posted at WOODWEB's Solid Wood Machining Forum (11/16) -- Good day gents, I'm looking for suggestions on safe and quick cutting of wine rac ...

    Re: Cutting wine rack lattice safely and efficiently
    A message posted at WOODWEB's Solid Wood Machining Forum (11/16) -- I would think using a caul on top of the lattice, close to the blade, held down w ...

    Re: Sliding table saw parts swap.
    A message posted at WOODWEB's Solid Wood Machining Forum (11/16) -- Thanks guys,,,, totally right... I bit the bullet and bought a Felder Kappa 40.. ...

    Re: BANDSAW BLADES
    A message posted at WOODWEB's Solid Wood Machining Forum (11/16) -- While you are at watch this video on how to tune up your saw. It will make a diff ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/16) -- ok. I mad some adjustments and changed out many hoses and cleaned out my return a ...

    Blades for sliding table saw
    A message posted at WOODWEB's Solid Wood Machining Forum (11/16) -- Hi, if you were to only own two blades. one for ripping 1~2" hardwoods, and ...

    Re: Buss # 4 Planer 30"
    A message posted at WOODWEB's Solid Wood Machining Forum (11/16) -- From the condition appearance in you photo I'd think that fifty to a hundred doll ...

    Re: Home built gang ripsaw plans?
    A message posted at WOODWEB's Solid Wood Machining Forum (10/16) -- Molders can also do this operation.... When I read "Home Built Gang Ripsaw&q ...

    Re: CNC through protective film
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/16) -- Thanks Nathan, We are opting to run face down with the film. That shoul ...

    Re: CNC through protective film
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/16) -- I always cut with film on and most of the time facing up, and have neve ...

    Re: wood pole cutt
    A message posted at WOODWEB's Solid Wood Machining Forum (10/16) -- chainsaw? ...

    Re: Using our Morbidelli to machine Corian
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/16) -- C, on our current machine its a HSK tool holder and arbor with a cutter ...

    Re: Using our Morbidelli to machine Corian
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/16) -- Alan, what tool are you using to cut coved splash on the horizontal CNC ...

    1/8" lumber veneer S2S?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/16) -- Hello all, I am looking for the best way to take say a 5-6" wide x ...

    Re: SCMI S63 planer
    A message posted at WOODWEB's Solid Wood Machining Forum (10/16) -- Hi john, my gringo did similar when trying to start first time. the t1 t2 t3 on t ...

    Re: Weinig Profimat 23
    A message posted at WOODWEB's Solid Wood Machining Forum (10/16) -- I agree with David. Get some training. It will save you headaches and loss produc ...

    Re: Finger joint cutter heads
    A message posted at WOODWEB's Solid Wood Machining Forum (10/16) -- Call AceCo. www.aceco.com/ ...

    Re: V-Groove Cutter on CNC for Solid Surface?
    A message posted at WOODWEB's CNC Forum (9/16) -- I have found that the geometry of the insert that I have is actually cutting as the angle at the ti ...

    Re: small gang rips or multi-blade moulders?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/16) -- Woodmaster was one of my first thoughts as well, but when I spoke with them on the ...

    Does Anybody Have A Newman KF-24 Gang Ripsaw?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/16) -- Hi, I'm looking for someone who has a Newman KF-24 gang ripsaw. I would like to as ...

    Re: Bandsaw Blade width Optimum for resawing door stile skins
    A message posted at WOODWEB's Solid Wood Machining Forum (9/16) -- They are the Lenox Woodmaster CT blades - I've bought them from "bandsawblade ...

    Re: Panel cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (9/16) -- You could get a custom cutter from a company like Freeborn. Or, if you have a Schm ...

    Re: Panel cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (9/16) -- Thanks, for straight edge panels that would work but I have curves and a circle to ...

    Re: has anyone used cabnetware and gone to cabinet vision
    A message posted at WOODWEB's CAD Forum (9/16) -- Thanks for the responses. We took a little bit of time to get into vision as well and finally decid ...

    Re: Stenner bandsaw blades
    A message posted at WOODWEB's Solid Wood Machining Forum (8/16/25) -- Makita used to make a resaw bandsaw with a 3" Stellite tipped blade. Maybe ...

    Moulder set up charges
    A message posted at WOODWEB's Solid Wood Machining Forum (8/16) -- So I've been dealing with more homeowners lately and it's always super short runs. ...

    Re: large-diameter shaper tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (8/16) -- Leitz would be a good supplier for this kind of cutter. ...

    sliding shaper advice
    A message posted at WOODWEB's Solid Wood Machining Forum (8/16) -- I'm wanting to upgrade the shaper in my shop. I have the room for shaper. I'm lean ...

    Re: wood name
    A message posted at WOODWEB's Solid Wood Machining Forum (8/16) -- I think belinga is the best match thank you guys for your time i have alot of work ...

    Re: wood name
    A message posted at WOODWEB's Solid Wood Machining Forum (8/16) -- Excellent, I learned something new today, Thanks ...

    Re: wood name
    A message posted at WOODWEB's Solid Wood Machining Forum (8/16) -- I think it is Belinga ...

    Re: wideblade 5 " verticle or horizontal 1"throwaway
    A message posted at WOODWEB's Solid Wood Machining Forum (8/16) -- A Wadkin PBR resaw would run a 3-1/2" wide blade for about 2 weeks before cha ...

    Re: post cat clean up - boogers in top coat
    A message posted at WOODWEB's Finishing Forum (8/16) -- I've had that problem and it was little semi-solid chunks passing through my filters. By clea ...

    SCM shaper spindle swap
    A message posted at WOODWEB's Solid Wood Machining Forum (7/16/25) -- I just purchased an SCM T160a tilt head shaper circa 2010. The spindle is 30mm ...

    Re: Beaded Frames
    A message posted at WOODWEB's Solid Wood Machining Forum (7/16/24) -- I think my comment may have been taken out of context. A bit on my history. I a ...

    Re: Beaded Frames
    A message posted at WOODWEB's Solid Wood Machining Forum (7/16/24) -- While I can appreciate the condescension, I've done it both ways. Square frames ...

    Re: Beaded Frames
    A message posted at WOODWEB's Solid Wood Machining Forum (7/16/24) -- I think the Hoffman/Morso machines are really the best at it from what I've see ...

    Re: Beaded Frames
    A message posted at WOODWEB's Solid Wood Machining Forum (7/16/24) -- Never used it - but I remember a lot of fuss when Hoffmann first came up with s ...

    Re: Beaded Frames
    A message posted at WOODWEB's Solid Wood Machining Forum (7/16/24) -- I also think someone could come up with a clever way to do this at lower cost w ...

    Re: RE: Vacuum Systems
    A message posted at WOODWEB's Solid Wood Machining Forum (7/16) -- What is the matter, the shavings getting knee deep? Dust collection is fundamental ...

    Wide Planer/Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (7/16) -- I have a client that manufactures 96" wide, 4"thick, 8'-40', cross lamin ...

    Re: weinig quattromat 22
    A message posted at WOODWEB's Solid Wood Machining Forum (7/16) -- Unfortunately This machine doesn't have a rebate attachment. Just a fixed fence an ...

    Re: SCM SI300n or Altendorf WA-80
    A message posted at WOODWEB's Solid Wood Machining Forum (6/16/25) -- we are having problems with our WA80 with raising and lowering the saw blade ma ...

    Re: Door Manufacturer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/16/22) -- Viewpoint Doors in Chilliwack, BC Canada. ...

    edgebander automatic and semi automatic
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/16) -- Silly question for you experts : but looking to get an edgebander . What ...

    chemetal argenta #221
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/16) -- this laminate is not flat - it has bumps etc . i was wondering how to ed ...

    Re: Rougherhead
    A message posted at WOODWEB's Solid Wood Machining Forum (6/16) -- Your photo looks like the finish we get from a set of "rougherhead knives&quo ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (6/16) -- We have been having a lot of problems with topsolid wood. I agree with others who have posted that ...

    Re: bridgewood 20" planer
    A message posted at WOODWEB's Solid Wood Machining Forum (6/16) -- thanks a lot fellars! ...

    edgebanding trimmer recommendations
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/16) -- My shop frequently applies two types of edgebanding: i) 3/4-1" wide ...

    Re: widebelt sanding maple
    A message posted at WOODWEB's Solid Wood Machining Forum (5/16/23) -- We have a Biesse 3 head with a steel drum and have not had burning issues. Have ...

    Re: Grizzly 18-36 Drum SDander
    A message posted at WOODWEB's Solid Wood Machining Forum (5/16) -- 18/36 tells me it is an 18" drum with one end open for wider work. These are ...

    threaded shank brad point bits
    A message posted at WOODWEB's Solid Wood Machining Forum (5/16) -- I have a Ritter horizontal boring machine but I am having a hard time (impossible? ...

    Re: threaded shank brad point bits
    A message posted at WOODWEB's Solid Wood Machining Forum (5/16) -- Nordicsaw.com ...

    Re: 12" table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/16) -- Are you looking for new or used? I believe the older Wadkin saws had the option of ...

    Re: 12" table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/16) -- If you want to re-saw spend your money on this and not a table saw. ...

    Dovetail Machines....
    A message posted at WOODWEB's Solid Wood Machining Forum (5/16) -- Thinking about moving up from the smaller manual dovetail jig up to a dovetail mac ...

    Re: Last bottom knife - really necessary?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/16) -- Scott The last bottom cutter head is very important. The purpose is to remove any ...

    Old Planer machine shooting "bullets"
    A message posted at WOODWEB's Solid Wood Machining Forum (5/16) -- I borrow an old china-made 2.2 KW planer machine, and it is shooting out "bul ...

    Re: I have to make my own moulder knives. What's the best way?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/16) -- Unless you have time on your hands that you can't find billable work for, I find t ...

    Solid Wood Plank Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (5/16) -- I have been asked to copy a weird plank door by a contractor who can't wait t ...

    Re: Chipping/splitting on edge of casing, American beech
    A message posted at WOODWEB's Solid Wood Machining Forum (5/16) -- My first question would be, why that species for paint grade? I personally have ne ...

    Re: Trying to learn how to do colored laminations for my business
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/16) -- This will give some insite into what you are trying to do. It does not l ...

    Pneumatic laminate trimmers?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/16) -- Anyone that's making custom laminate cabinets - do you use mostly electr ...

    Re: Cabinet vision Solid Ultimate Version 11
    A message posted at WOODWEB's Cabinetmaking Forum (4/16/24) -- I think its because your pc cant handle the graphics. Mine is doing the same thing and ...

    Re: Water cooled spindle in router table?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/16/24) -- I have 2 or 3 of those older Porter cable routers I would be willing to get rid ...

    Re: Need a new (or used) shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (4/16/23) -- Thanks all for the responses. Bruce, I have looked at the one at Barbo. looks l ...

    Re: Need a new (or used) shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (4/16/23) -- Ask them to split it with you. Never know until you try. ...

    Re: Solid wood steps
    A message posted at WOODWEB's Furniture Making Forum (4/16/22) -- Great information! Thanks for sharing us! ...

    Re: WIDE BELT SANDER INFO
    A message posted at WOODWEB's Solid Wood Machining Forum (4/16) -- I sure am full of it.......opinions that is! As far as sanding goes, 85 shore rubb ...

    Handheld Shop Orbital Sanders
    A message posted at WOODWEB's Solid Wood Machining Forum (4/16) -- In sanding 6” to 10” inch wide thin boards, if you do not have a “time saver type ...

    Glue / dust and whatever stuck @ diamond hone!!!
    A message posted at WOODWEB's Solid Wood Machining Forum (4/16) -- Help, i just bought a diamond hone, and start sharpening the cutter, and dirty thi ...

    Re: Glue / dust and whatever stuck @ diamond hone!!!
    A message posted at WOODWEB's Solid Wood Machining Forum (4/16) -- Soak it in kerosene or mineral spirts ...

    Re: Orbital Shop Sanders
    A message posted at WOODWEB's Solid Wood Machining Forum (4/16) -- 11'' DYNABRADE. Air or electric ...

    Re: WIDE BELT SANDER INFO
    A message posted at WOODWEB's Solid Wood Machining Forum (4/16) -- 90 shore I mean. Sorry. ...

    Re: Replacing Feed Belt on Butfering Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (4/16) -- Dressing the belt feed means sanding off the surface to expose fresh rubber and al ...

    Re: Replacing Feed Belt on Butfering Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (4/16) -- Can you elaborate on what you mean by "dressing" the conveyor belt? How ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16/25) -- I agree that there is more than one problem here. One thing that you should che ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16/24) -- Thanks D. This is just coming to mind as I write (thanks for all of the input g ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16/24) -- I would screw a sacrificial backing board to the sliding table fence that exten ...

    Re: Martin T17F
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16/22) -- Joe, Thanks for that part number. I’ll reach out to Martin to see if that works ...

    burnishing hardwoods with lignin present? (summer cut vs winter?)
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16/22) -- Making arrow shafts for archers. I am using birch and aspen. Once dried to 7%, ...

    wide belt sander trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16/22) -- We have a Powermatic 37/60 sander. It won't read some belts. Within a box, some ...

    Moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16/22) -- When running a single knife finish machine is there ever any benefit to having ...

    Pre-mil
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/16) -- I've never seen a separate aftermarket pre-mil unit available for an edg ...

    Re: Pre-mil
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/16) -- A premill station on an edgebander is one or two shaper heads that trim ...

    Re: Adjusting wide belt sander bed
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- Hi Dave, please find the following instructions from our instruction book. This is ...

    Re: Canwood widebelt won't start
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- Resolved. Not enough amperage from the phase converter to handle the inrush load o ...

    Adjusting wide belt sander bed
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- Our 24" widebelt sander has the right side of the feed table .5 mm lower than ...

    Re: Adjusting wide belt sander bed
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- Make / model / pics? ...

    Re: Leadermac moulder operation
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- I also have a similar 5 head molder and I don't use the last bottom head either si ...

    Leadermac moulder operation
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- Using a 5 head Leadermac moulder and wanting to not use last bottom head. The bed ...

    Re: Leadermac moulder operation
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- I was hoping for a shim under the last 2 bed plates but no such luck. I'm just get ...

    Re: Using tooling after a FIRE
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- Our original shop was a total loss in the 80's from a fire. We did go in and salva ...

    Using tooling after a FIRE
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- We had a massive fire at our shop and it burned EVERYTHING combustible in our shop ...

    Re: Hitachi cb75F resaw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- I have been using a Hitachi CB75F for many years now. Anyone have a source or expe ...

    Re: Using tooling after a FIRE
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- Hey, what's the worst that could happen? ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- I am all for riving knives and splitters. They make table saw use much safer. At m ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- Yeah, I totally I hear you on radial arm ripping. I had a strange grain-match obse ...

    Re: pm15 feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- Good afternoon: We can recover your existing feed roller shaft with new urethane m ...

    Re: Safety Speed 37" wide belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- There are much better machines than the Grizzly or Safety SC on the market for the ...

    Insert shaper head
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- I'm wondering if anyone makes a shaper head that will accept w&h bolt pattern ...

    Re: Insert shaper head
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- Try CGG Schmidt ...

    Delaminating NAF/FSC board
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/16) -- Anyone else having any issues this year with projects delaminating and r ...

    Looking to buy a used Weinig Rondamat 925 Grinder arbor
    A message posted at WOODWEB's Solid Wood Machining Forum (3/16) -- Hello Forum, I have a used Weinig Rondamat 925 Grinder, but I am missing the arbor ...

    Re: SS polish
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/16/22) -- Understood and agree with your opinions with regards to gloss and sho ...

    Re: Solid wood cutting.
    A message posted at WOODWEB's CNC Forum (2/16/22) -- What is the percentage of the power of the spindle in the power demand of the entire machine too ...

    repair tech
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16/22) -- does anyone have any contact info for an industrial technician to perform a PM ...

    Re: Resaw bandsaw blade sharpening service
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16/22) -- David Sochar, I can't find them on Google. Do you have a phone number for them? ...

    Re: Resaw bandsaw blade sharpening service
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16/22) -- Thank you, David, I will contact them tomorrow. ...

    Re: Resaw bandsaw blade sharpening service
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16/22) -- Manitowoc Saw Service in Manitowic , Minnesota ...

    Re: Canada Edgebander Recommendations?
    A message posted at WOODWEB's Cabinetmaking Forum (2/16) -- A few questions to ask or answer before deciding on a bander: Is this going to be a singl ...

    Seeking Shaker passage door shaper cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- I need to build some 3 panel passage doors with a shaker profile. In this case I m ...

    Re: Help. G1012 planer snipe evenly on both ends
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- I believe I found the problem. Keep in mind, I would consider myself as a beginner ...

    Help. G1012 planer snipe evenly on both ends
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- I have a grizzly g1012 planer. I owned it for the past 6 years. Last week I change ...

    Re: Help. G1012 planer snipe evenly on both ends
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- I used to own one similar to yours. They really benefit from the setting up that i ...

    Re: Help. G1012 planer snipe evenly on both ends
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- You have set the knives higher than previously. This has changed the height relati ...

    Re: Help. G1012 planer snipe evenly on both ends
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- That you for the response. I'm going check the alignment on the chipbreaker and th ...

    Re: 4 sided planer vs moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- We are looking into this as well and we need to run 4/4 walnut which has been ripp ...

    Re: Butcher Block Grain Direction
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- Always orient the grain in the longest direction with the smallest cross grain mea ...

    Re: Best way to make window grilles (for IGU)
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- Stegherr is one company that makes the machinery for this. But you also have to ha ...

    Re: Best way to make window grilles (for IGU)
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- This is the video showing the Hoffman machine making the half-lap for a window gri ...

    Re: Level infeed bed on Weinig Powermat 500
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- Thank you for the responses! Jason, the spurs were just changed about a week and a ...

    Re: profile grinder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- Doug: It's a Woodmaster 718. This is kind of a long story but here goes. I bought ...

    Re: Level infeed bed on Weinig Powermat 500
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- James I would put the original black belt back on the first bottom. As far as the ...

    Re: Level infeed bed on Weinig Powermat 500
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- Thanks for the tip Russ! I didn't know that. It looks like we have a faulty timer. ...

    Re: Level infeed bed on Weinig Powermat 500
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- James FYI - when you say 7.5hp it's really a 10 HP. Germany rates the motor in KW ...

    Re: profile grinder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- Doug: If you have the template for the knife it would be real easy to sharpen one. ...

    Re: Level infeed bed on Weinig Powermat 500
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- Awesome I am pleased you found the cause! Many people at Weing helped me throughou ...

    Re: profile grinder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- impressive, i wouldn t even show my customers that profile. way to complicated. mo ...

    Electric eyes for Ramco Dw-900RP sander
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- We are searching for sources for electric eyes for a wide belt sander. They are cr ...

    Fire rated door certification
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/16) -- Is there any one on here that can help me in getting a certification on ...

    Re: profile grinder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- Hey Doug... I see the AF-5 cost twice as much now as when I bought mine. Just ran ...

    Re: profile grinder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- allie what machine are you running those knives in? are you going right from grind ...

    Re: profile grinder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- allie what machine are you running those knives in? are you going right from grind ...

    Re: Fire rated door certification
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/16) -- Start with Warnock Hersey or UL. ...

    Powermatic 15HH awful noise
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- Upgraded to a Powermatic with a byrd head, but i'm getting this AWFUL metallic dra ...

    extra height on a Weinig
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- Most molders I see are rated 4 3/4" maximum height of cut. Can someone tell m ...

    Re: Powermatic 15HH awful noise
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- Sounds like the chipbreaker is dragging on the wood and 'singing', like fingernail ...

    Re: desparately need a resaw solution
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- Stable and square is not the issue. It is simply the length of the fence. As you r ...

    Re: desparately need a resaw solution
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- Thanks everyone for your replies. Adam, I'm using a 24" x 7" resaw fence ...

    Re: desparately need a resaw solution
    A message posted at WOODWEB's Solid Wood Machining Forum (2/16) -- Properly tension your blade and you wont need a pipe fence. ...

    Re: Strong end-grain joint
    A message posted at WOODWEB's Solid Wood Machining Forum (1/16/25) -- The first pic is the layout of my cnc. I have made a melamine table with gasket ...

    Re: drawer bottoms thickness
    A message posted at WOODWEB's Cabinetmaking Forum (1/16/25) -- Solid maple 1/2" sides and 3/8" ply bottoms for large or small drawers ...

    Re: Strong end-grain joint
    A message posted at WOODWEB's Solid Wood Machining Forum (1/16/25) -- Looks good. How do you machine the joint? ...

    Software question
    A message posted at WOODWEB's CNC Forum (1/16/24) -- Our company is receiving our brand new HolzHer Epicon 7135 5-axis CNC in a few weeks, to replace ...

    Re: Dowel profile shaper cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (1/16/22) -- I would get Molding Knives.com to cut a set. They use CAD/CAM hot wire epdm to ...

    Re: Problems with Wilsonart 1730 contact adhesive
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/16) -- We are having the same issues. We also started using the glue in 2012 an ...

    Tectus Hinges
    A message posted at WOODWEB's Architectural Woodworking Forum (1/16) -- Has anyone used the Tectus hinges from Simonswerk on Solid Core interior door ...

    Re: Wood or MDF?
    A message posted at WOODWEB's Architectural Woodworking Forum (1/16) -- Solid wood, properly dried and selected and joined, has been the material of ...

    Re: Planer or Jointer first??
    A message posted at WOODWEB's Solid Wood Machining Forum (1/16) -- Basic good practice calls for wood to faced and edged on a jointer before planing. ...

    T&G Shaper Cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (1/16) -- There seems to be a conspiracy regarding tongue and groove shaper cutters for thic ...

    Re: Buying a Widebelt - what to check
    A message posted at WOODWEB's Solid Wood Machining Forum (12/15/22) -- Air leaks would be the easiest thing to repair. Belt tracking is something tha ...

    Buying a Widebelt - what to check
    A message posted at WOODWEB's Solid Wood Machining Forum (12/15/22) -- I'm considering purchase of a used single head mid-90's 24" widebelt sand ...

    Re: Buying a Widebelt - what to check
    A message posted at WOODWEB's Solid Wood Machining Forum (12/15/22) -- Definitely hook it up to air and check for leaks. Look inside the electrical c ...

    Re: EMA/Casadei shaper spindle bearing replacement
    A message posted at WOODWEB's Solid Wood Machining Forum (12/15/21) -- To judge whether the bearing can be used again, it should be decided according ...

    Re: EMA/Casadei shaper spindle bearing replacement
    A message posted at WOODWEB's Solid Wood Machining Forum (12/15/21) -- After going through the removal process, you would regret not replacing the be ...

    Re: 4 head moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (12/15/21) -- Did you get this up and running? Curious how you made out with it. ...

    Whitney planer
    A message posted at WOODWEB's Solid Wood Machining Forum (12/15) -- How do I set up the onboard knife grinder to sharpen my Whitney S205 Planer? ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (12/15) -- It's never up, it's always down because thats how you use the planer to thickness ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/15) -- Missing or damaged baffles or chip deflectors can cause this problem. On some mac ...

    Re: Weinig U17A Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (11/15) -- The Weinig U-17a is in my opinion one of Weinig signature moulders, that was very ...

    shaper pin
    A message posted at WOODWEB's Solid Wood Machining Forum (11/15) -- Does anyone know the size of a starting taper pin for a delta shaper? ...

    Re: Weinig U17A Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (11/15) -- Thanks Russ. This is very helpful dave ...

    Re: Saw blade I.D.
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15/25) -- Not sure what it was used for. There is 3 of them and they all have the rubber ...

    Re: Saw blade I.D.
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15/25) -- The geometry doesn't look like it's for wood. Maybe a metal grooving bit for a ...

    Re: Saw blade I.D.
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15/25) -- You sure it's for wood? ...

    Re: Using our Morbidelli to machine Corian
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/15) -- We use a horizontal router to "V" groove and do cove splahes, ...

    Re: Custom shaper Knives Protruding Slightly Above Head
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15) -- I had forgotten, that disc is actually 9" and has a cutting depth of ~3.75-4 ...

    Re: Custom shaper Knives Protruding Slightly Above Head
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15) -- Pete D: I did not show it or draw to scale, but the knife protrusion beyond the h ...

    SCMI S63 planer
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15) -- I just purchased a used SCMI S63 planer with no manual, user's guide or electrica ...

    Custom shaper Knives Protruding Slightly Above Head
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15) -- Please see attached photo describing my question.. I have been learning to custom ...

    Re: Custom shaper Knives Protruding Slightly Above Head
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15) -- Based on your image the projection above the cutter head wouldn't be the issue. T ...

    Re: Custom shaper Knives Protruding Slightly Above Head
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15) -- Typically the profiled part of the knives protrude beyond the collar or head not ...

    Re: Custom shaper Knives Protruding Slightly Above Head
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15) -- V I have attached a link to some options that might work better than what you are ...

    Re: Custom shaper Knives Protruding Slightly Above Head
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15) -- Russ: Thank you for the link.. I have already been buying my steel and head from ...

    Re: Custom shaper Knives Protruding Slightly Above Head
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15) -- Glad Russ guided you to the right cutter head. The coping discs are too big for a ...

    Re: Custom shaper Knives Protruding Slightly Above Head
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15) -- Pete D, that looks very nice! Where was this head purchased? Also, I see that you ...

    Re: Custom shaper Knives Protruding Slightly Above Head
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15) -- This is the 8" coping disc & knives. I bought the coping discs for long ...

    Weinig molders and carbide insert tooling
    A message posted at WOODWEB's Solid Wood Machining Forum (10/15) -- Is there any reason not to use carbide insert tooling for molding run on a Weinig ...

    Re: Large veneered doors substrate and max. size
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/15) -- Excellent, thanks very much for your help John. ...

    Re: Large veneered doors substrate and max. size
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/15) -- You're welcome! ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (10/15) -- You might want to look at a program like FormZ 8 for design...... it want do the Cam part but it w ...

    Re: Repairing chipped laminate cabinet faces
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/15) -- Real question is....you can spend all the time you want to match the la ...

    Re: Jointer Setup
    A message posted at WOODWEB's Solid Wood Machining Forum (9/15/21) -- 8” is all you need “to stay in business”. Unless you are frequently making inte ...

    Re: Jointer Setup
    A message posted at WOODWEB's Solid Wood Machining Forum (9/15/21) -- mm higher on one side? I'd be disappointed with a few thousandths higher on one ...

    Re: small gang rips or multi-blade moulders?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/15) -- Gents, thank you all for your replies. Dustin, these do need to be accurate cuts a ...

    Re: small gang rips or multi-blade moulders?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/15) -- A woodmaster might work. I don’t know if you can get to 1/2” with there blade setu ...

    Re: Corian Counters
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/15) -- We do it when specified, we usually don't do it if the top overhangs 3/4 ...

    Re: Sicar Machinery
    A message posted at WOODWEB's Solid Wood Machining Forum (9/15) -- I can't comment on anything they make except a sliding table saw, it was poorly bu ...

    Re: Choosing correct cabinet design and Cam package pairing
    A message posted at WOODWEB's CNC Forum (9/15) -- I am glad you are looking for a solution to this process. At Microvellum we have been providing thi ...

    Re: Straight line rip saw personal safety solutions
    A message posted at WOODWEB's Solid Wood Machining Forum (9/15) -- Joe and Justin, I tend rip shorter pieces and those are the ones that are going to ...

    Re: Straight line rip saw personal safety solutions
    A message posted at WOODWEB's Solid Wood Machining Forum (9/15) -- Our import Oliver has the 3 sets of anti kickback also. We have had no issues with ...

    Panel cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (9/15) -- Does anyone know where I can find this panel cutter in stock with or without back ...

    Re: Last bottom knife - really necessary?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/15) -- I use Lube Biolube 200 ...

    Re: Panel cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (9/15) -- I have done those on the table saw. ...

    Re: Planer rolls
    A message posted at WOODWEB's Solid Wood Machining Forum (9/15) -- Hi Budg: We do this kind of roller recovering on a regular basis. Please feel free ...

    Weinig
    A message posted at WOODWEB's Solid Wood Machining Forum (9/15) -- Does anyone have any good suppliers or alternative options to parts for weinig mol ...

    Re: Box joint machine
    A message posted at WOODWEB's Solid Wood Machining Forum (9/15) -- Looks like it could be a JKO hauncher, google jkomachinery. ...

    Re: Delta table saw parts
    A message posted at WOODWEB's Solid Wood Machining Forum (8/15) -- Snaglpuss Thought I would post some pics so you can see what the gear wear looks l ...

    Re: Delta table saw parts
    A message posted at WOODWEB's Solid Wood Machining Forum (8/15) -- Let us know how this goes. One of our two RT40's has the same problem. ...

    Re: Transition from Autocad to Wood cad/cam or Giotto or BSolid
    A message posted at WOODWEB's CAD Forum (8/15) -- Thanks Gary The people I'm thinking of would fit into that category. Prior to that the way they tre ...

    Re: wood name
    A message posted at WOODWEB's Solid Wood Machining Forum (8/15) -- The place where i bought this type of wood call it "body or boddy or buddy &q ...

    Re: wood name
    A message posted at WOODWEB's Solid Wood Machining Forum (8/15) -- Ok, not mahogany if orange. Maybe bubinga. Grain also looks like Bloodwood but it ...

    Re: wood name
    A message posted at WOODWEB's Solid Wood Machining Forum (8/15) -- On a guess Iroko, looks close ...

    Re: wood name
    A message posted at WOODWEB's Solid Wood Machining Forum (8/15) -- Mahogany. ...

    wideblade 5 " verticle or horizontal 1"throwaway
    A message posted at WOODWEB's Solid Wood Machining Forum (8/15) -- we are considering resawing 2x6 spf kd into deck boards for the pallet industry we ...

    Re: wideblade 5 " verticle or horizontal 1"throwaway
    A message posted at WOODWEB's Solid Wood Machining Forum (8/15) -- we have got about 4 to 6 hrs at 50 fpm on the bake resaws when you saw you have go ...

    Re: Original Makita 2012NB Blade
    A message posted at WOODWEB's Solid Wood Machining Forum (8/15) -- Bought two resharpenable blades, twice of price of disposable ones. Strange enough ...

    Re: wideblade 5 " verticle or horizontal 1"throwaway
    A message posted at WOODWEB's Solid Wood Machining Forum (8/15) -- We run a 1" Lenox carbide tipped on a 36" saw.. not cheap but they last ...

    Corner rounding 3mm PVC
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/15) -- Does any one have any insight on corner rounding. I want to use 1/8" ...

    Re: Routing color layer off hpl...
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/15) -- Are the floor tiles installed already? Could you make a jig and do it on ...

    Which 26"-32" Thickness Planer for various kind of woods
    A message posted at WOODWEB's Solid Wood Machining Forum (7/15) -- Hi all, I am asking your expert experience: Please recommend a low cost, easy to u ...

    Re: Help: Do i need Makita 5402 415MM (16-5/16′) – CIRCULAR SAW
    A message posted at WOODWEB's Solid Wood Machining Forum (7/15) -- bought another 9 1/4" makita circular saw. "Too small" my teacher t ...

    weinig quattromat 22
    A message posted at WOODWEB's Solid Wood Machining Forum (7/15) -- HELP my friend has just moved to a new shop. The machine works fine on top and bot ...

    Re: Quick change planer blade system
    A message posted at WOODWEB's Solid Wood Machining Forum (7/15) -- I bought my SCMI 20" used and to my surprise it came with a Tersa head. It ta ...

    Re: weinig quattromat 22
    A message posted at WOODWEB's Solid Wood Machining Forum (7/15) -- Try checking the alignment of the rebate cutter. I have attached an article to hel ...

    Re: Diehl DL405 molder DOS operating sys
    A message posted at WOODWEB's Solid Wood Machining Forum (7/15) -- If your 405 turns out to be a boat anchor please let me know. I could use a good p ...

    Re: Routing color layer off hpl...
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/15) -- Thank you, Eddie. I'll dig into it and let you know how it turns out. ...

    Corian no-drip edge sticks
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/15) -- We are doing a job with a lot of no-drip edges in Corian Serene Sage. Do ...

    Re: bridgewood 20" planer
    A message posted at WOODWEB's Solid Wood Machining Forum (6/15) -- Stock on edge rolling is usually caused by uneven spring pressure from side to sid ...

    Re: Rejuvinating Molder feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/15) -- A few things to consider: 1. Make sure the rollers are the same diameter . If not, ...

    Re: bridgewood 20" planer
    A message posted at WOODWEB's Solid Wood Machining Forum (6/15) -- Does it have a pressure bar in front of the cutterhead? Might be not parallel to t ...

    Re: Telegraphing through HPL
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/15) -- We have used PVA white glue for years and almost never have a warping is ...

    Re: widebelt sanding maple
    A message posted at WOODWEB's Solid Wood Machining Forum (5/15/23) -- we ran more maple today . My sander has a steel drum for the first belt (the 80 ...

    Last bottom knife - really necessary?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/15) -- We have an older Weinig Profimat 23E - 5 head. If I am NOT running any grooves in ...

    Re: I have to make my own moulder knives. What's the best way?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/15) -- Sounds like your using a less expensive aluminum oxide grinding wheel, try using a ...

    Re: Water cooled spindle in router table?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/15/24) -- I have never had on of the older PC motors, if i found one i'd definitely take ...

    Kolle F45-m Shaper Schematics
    A message posted at WOODWEB's Solid Wood Machining Forum (4/15/24) -- We are having an electrical issue with our Kolle shaper. The company went out o ...

    Re: Finish planing, helical and quick change knives
    A message posted at WOODWEB's Solid Wood Machining Forum (4/15) -- Bill, I would think sanding is the only step you need to take after the Extrema. I ...

    Re: Direct Drive VS. Belt
    A message posted at WOODWEB's Solid Wood Machining Forum (4/15) -- Direct drive is limited to the torque of the motor being used, presumably at a fix ...

    Re: Original 3-1/4 HP Plunge Router Flush Bit
    A message posted at WOODWEB's Solid Wood Machining Forum (4/15) -- First, you will find lots of people willing to take time to help you figure things ...

    Re: Original 3-1/4 HP Plunge Router Flush Bit
    A message posted at WOODWEB's Solid Wood Machining Forum (4/15) -- Then, which brand of bits is the best where i don't need to care the wood material ...

    Re: Original 3-1/4 HP Plunge Router Flush Bit
    A message posted at WOODWEB's Solid Wood Machining Forum (4/15) -- Sounds like the bit is already dull and needs to be checked out and maybe serviced ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15/25) -- So after looking at your pictures and thinking for a bit. You have multiple pro ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15/24) -- I can and will take a light finish cut Tom - the channel can be a bit wider tha ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15/24) -- That's certainly another reason to take light cuts Tom. I had a tool maker frie ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15/24) -- I don't love the use of two fences to constrain the workpiece. I would back off ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15/24) -- I think the cut will be fine. If I were trying to achieve a really precise fit ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15/24) -- One thought as to why recessed spindle nuts might no be common is that it is be ...

    Re: Source for prelaminated panels with realistic faux walnut?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/15/23) -- Ok, I received the Cleaf samples and they're.... interesting. On the ...

    Re: Source for prelaminated panels with realistic faux walnut?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/15/23) -- I forgot to mention: in the above images, left to right is the Ikea s ...

    Re: Breaking edges efficiently and consistently
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15) -- I prefer the offset rim too. Have to agree with the above there. ...

    Re: Problems with Wilsonart 1730 contact adhesive
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/15) -- A few shops have contacted me directly about 1730 issues, and I've respo ...

    sanding belt pitch and resin remover disposal
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15) -- Hello- Is anyone familiar with Nu-Life Pitch and Resin remover? It works great on ...

    Re: sanding belt pitch and resin remover disposal
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15) -- Disposal might be $0.35 a gallon or around $20. Not as expensive as you might thin ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15) -- Funny story about people and riving knives. And this is why I think that my motly ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15) -- Raul--woah!! Please oh please tell me you have a pic of that set-up. I've heard of ...

    Re: Cracking on 6" walnut post glue-ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15) -- I do not believe glue would cause this on 4/4 Walnut. It could be that the wood us ...

    Re: Cracking on 6" walnut post glue-ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15) -- If the cracks were all along the glue line between laminations, i'd say adhesive i ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15) -- Phil is right - 100%. The riving knife is basic. But the US saw makers spent $1.25 ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15) -- Mel - I agree radial arm saws can useful tools in the right hands, but I wouldn't ...

    pm15 feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (3/15) -- does anyone know where I could find replacement rollers? I bought a used pm15 and ...

    Hot press info
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/15) -- Looking for some info on hot presses. How much time would you typically ...

    Re: edge sanders
    A message posted at WOODWEB's Solid Wood Machining Forum (2/15/26) -- I have an Oakley as well. It's in need of some love. These make me curious. htt ...

    Re: Conditioner For Wide Belt Conveyer Belt?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/15/24) -- Just wiping down the belt with a rag dampened with Simple Green changes the col ...

    Re: Conditioner For Wide Belt Conveyer Belt?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/15/24) -- Good to know, thanks! ...

    Re: SS polish
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/15/22) -- This is for a commercial setting. I ask because I dont use the wax/po ...

    Re: small gang rips or multi-blade moulders?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/15) -- Be aware, OSHA requires anti-kickback devices when ripping multiples. I think a si ...

    Re: resource for basic shaper speed/feed info?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/15) -- Information from the tooling companies should help with speeds and feeds. They are ...

    Re: Metal Detector For Staples!
    A message posted at WOODWEB's Solid Wood Machining Forum (2/15) -- The grit is small bits of gravel coming from the forks and yard of the folks that ...

    Re: Level infeed bed on Weinig Powermat 500
    A message posted at WOODWEB's Solid Wood Machining Forum (2/15) -- Thanks for the response, and info on aligning the bed, I just finished! As far as ...

    Re: Level infeed bed on Weinig Powermat 500
    A message posted at WOODWEB's Solid Wood Machining Forum (2/15) -- James I would order an original thin black belt from Weinig for that spindle. Open ...

    Re: Level infeed bed on Weinig Powermat 500
    A message posted at WOODWEB's Solid Wood Machining Forum (2/15) -- James Call Weinig, talk to James or Ron in tech support. Have your electrical mete ...

    Re: Level infeed bed on Weinig Powermat 500
    A message posted at WOODWEB's Solid Wood Machining Forum (2/15) -- James I only ask this because sometimes simple things get overlooked, not to insul ...

    Laser
    A message posted at WOODWEB's Solid Wood Machining Forum (2/15) -- I am looking to put a laser on my straight line rip saw. Grizzly sells one as an a ...

    Re: desparately need a resaw solution
    A message posted at WOODWEB's Solid Wood Machining Forum (2/15) -- You did't mention top and bottom guide bearings. Your not mentioning it is probabl ...

    Re: desparately need a resaw solution
    A message posted at WOODWEB's Solid Wood Machining Forum (2/15) -- One word...TENSION ...

    Re: Mortise machine
    A message posted at WOODWEB's Solid Wood Machining Forum (1/15/24) -- I couldn’t see the plug in the ad. I did find out that the mortiser is actually ...

    Shaper parts help
    A message posted at WOODWEB's Solid Wood Machining Forum (1/15/24) -- I am trying to find a replacement for the spindle lock on our scm t160 shaper. ...

    Re: Mortise machine
    A message posted at WOODWEB's Solid Wood Machining Forum (1/15/24) -- What does the plug look like? ...

    Re: Any good book for intermediate/advanced cnc machining in wood
    A message posted at WOODWEB's CNC Forum (1/15/23) -- What software are you or do you plan to use, and what operations are you planning to do? Solid w ...

    Re: Solid wood cutting.
    A message posted at WOODWEB's CNC Forum (1/15/22) -- I had a lot of trouble getting good finish on grainy woods like rift oak untill I started using ...

    Re: Trouble shooting holster 1265
    A message posted at WOODWEB's Solid Wood Machining Forum (1/15) -- Check air regulator for grid also check bar locks in slot ,you unlock slot bar to ...

    Re: broken bandsaw blades
    A message posted at WOODWEB's Solid Wood Machining Forum (1/15) -- Another thing: let go of the workpiece occasionally to check that the blade is not ...

    Re: richlite
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/15) -- http://www.richlite.com/ 888.383.5533 This looks like a good place to st ...

    Planer or Jointer first??
    A message posted at WOODWEB's Solid Wood Machining Forum (1/15) -- If a 12" wide piece of wood is thicker at one side than the other in its leng ...

    Re: Beaded doors
    A message posted at WOODWEB's Solid Wood Machining Forum (1/15) -- Your style works for a flat panel, but if you needed to put a raised panel in ther ...

    Re: 3 phase rotary converter for weinig p22 & dust collection
    A message posted at WOODWEB's Solid Wood Machining Forum (1/15) -- I have a similar situation I run a 4 head scmi with 18hp heads on a 25hp phase con ...

    Re: Beaded doors
    A message posted at WOODWEB's Solid Wood Machining Forum (1/15) -- JR and Leo, how are you guys notching/mitering the bead on the door style? JR, is ...

    Re: Beaded doors
    A message posted at WOODWEB's Solid Wood Machining Forum (1/15) -- We have a Morso hauncher with a shop made zero clearance insert that fits into the ...

    Re: Sawstop power loss
    A message posted at WOODWEB's Solid Wood Machining Forum (12/14) -- Make sure a pulley isn't slipping from a dropped out key or loose set screw. ...

    Laminate Undermounts
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/14) -- Undermount sinks in laminate countertops. Issues? Have you ever lived w ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (12/14) -- Well i guess there is some disagreement on the "up to" - vs - "dow ...

    Re: Spindle shaper bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (12/14) -- Well, got my machine apart yesterday and I wasn't too happy with what I found. Se ...

    Re: Attaching heavy gauge copper to wood
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/14) -- Just had a similar request. I thought of having the metal guy fabricate ...

    resawin problem
    A message posted at WOODWEB's Solid Wood Machining Forum (12/14) -- I presently have a Delta 14" band saw #28-212. Anyone have this saw and if s ...

    Re: Laminating advice needed
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/14) -- you can not buy the materials for what buying laid up panels will cost. ...

    Re: Laminate Seams on Tube/Column
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/14) -- not sure if this is what you mean but the Betterly Seaming Router allow ...

    Re: Saw blade sharpening
    A message posted at WOODWEB's Solid Wood Machining Forum (11/14) -- Number of sharpenings depends on how often you do it. Run the carbides till they ...

    Re: Pro scale / widebelt
    A message posted at WOODWEB's Solid Wood Machining Forum (11/14) -- I'm sure he can re-zero the readout after taking some accurate measurements. I fo ...

    Re: General 25 " Dual Drum Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (11/14) -- You also need to say if the feed motor is dc or ac, and how it is wired now. Soun ...

    Re: Perske 3 phase motor 230/460 V
    A message posted at WOODWEB's Solid Wood Machining Forum (11/14) -- I'm with Bill, a static converter will not cut it on a heavily loaded machine. Yo ...

    Re: laminate seam in front of kitchen faucet damaged by water
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/14) -- Looking at the waves in the top. The particle board is trash. Rip the t ...

    laminate seam in front of kitchen faucet damaged by water
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/14) -- Is it possible to reglue the damage? The sink base is now barely sittin ...

    Weinig U17A Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (11/14) -- I need a moulder to run custom flooring and decking at a small lumber mill. Max o ...

    Re: Knife grinding
    A message posted at WOODWEB's Solid Wood Machining Forum (10/14/23) -- If you grind, at 20 degrees, a pattern that is .500" deep, then run those ...

    Re: spindle nut
    A message posted at WOODWEB's Solid Wood Machining Forum (10/14/21) -- Like David said get a machine shop to make it. They will make it loose or tigh ...

    Re: spindle nut
    A message posted at WOODWEB's Solid Wood Machining Forum (10/14/21) -- The problem I have had with ordering large nuts is I don't have a way to descr ...

    Re: spindle nut
    A message posted at WOODWEB's Solid Wood Machining Forum (10/14/21) -- Measure it and see if you can find a match at McMaster Carr. Otherwise, what D ...

    Re: spindle nut
    A message posted at WOODWEB's Solid Wood Machining Forum (10/14/21) -- You can buy thread gauges in metric and imperial. ...

    Re: Nonflammable Contact Cement
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/14) -- I’ve tried the Weldwood NF contact cement, and had a lot of delaminatio ...

    Scissor lift source
    A message posted at WOODWEB's Solid Wood Machining Forum (10/14) -- Any recommendations on a source for scissor lifts? This is the type used to raise ...

    Re: Scissor lift source
    A message posted at WOODWEB's Solid Wood Machining Forum (10/14) -- I just started to look at these myself. I found an electric automotive scissor li ...

    Re: Scissor lift source
    A message posted at WOODWEB's Solid Wood Machining Forum (10/14) -- Forgot to mention that the price was around $1500 usd through a local dealer. ...

    Re: Large veneered doors substrate and max. size
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/14) -- Hi Robert, Yes, you definitely need to crossband that door, especially ...

    Re: Large veneered doors substrate and max. size
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/14) -- Hey John, I think the issue with the MDF was my own fault in not cross ...

    Re: V-Groove Cutter on CNC for Solid Surface?
    A message posted at WOODWEB's CNC Forum (9/14) -- Further to Mark B's point about the tip of the miterfold bit pushing and not really cutting, the fo ...

    Re: V-Groove Cutter on CNC for Solid Surface?
    A message posted at WOODWEB's CNC Forum (9/14) -- The aggregate/saw option is great if your running a mile of these daily in which case I would imagi ...

    Re: small cedar display case am I ok building
    A message posted at WOODWEB's Solid Wood Machining Forum (9/14) -- A few things to add to the mix: Is the Cedar quarter sawn or plain sawn? In Cedar, ...

    Re: small cedar display case am I ok building
    A message posted at WOODWEB's Solid Wood Machining Forum (9/14) -- I don't see any issues, your process seems fine, and cedar is pretty good in just ...

    Re: Straight line rip saw personal safety solutions
    A message posted at WOODWEB's Solid Wood Machining Forum (9/14) -- Hi Justin, We have a 10 year old model of that saw. 2 rows of fingers on top, 1 ro ...

    Re: Straight line rip saw personal safety solutions
    A message posted at WOODWEB's Solid Wood Machining Forum (9/14) -- Justin, Not trying to beat a dead horse to death, but I did ask my guy who runs th ...

    Re: Straight line rip saw personal safety solutions
    A message posted at WOODWEB's Solid Wood Machining Forum (9/14) -- Just a point of information we have a relatively new Diehl saw and never get kickb ...

    Re: Stenner bandsaw blades
    A message posted at WOODWEB's Solid Wood Machining Forum (8/14/25) -- Is there something special about these blades that precludes you purchasing fro ...

    Re: Stenner bandsaw blades
    A message posted at WOODWEB's Solid Wood Machining Forum (8/14/25) -- BH, It's a resaw, the blades are 4" wide x 18'4" long with Stellite t ...

    Re: Invicta Ti-14 spindle
    A message posted at WOODWEB's Solid Wood Machining Forum (8/14/24) -- That looks a lot like the SCMI T-110 spindle setup. When the spindle wouldn't r ...

    Re: Delta table saw parts
    A message posted at WOODWEB's Solid Wood Machining Forum (8/14) -- Bill, Thanks for getting back with me! I called and they reminded this saw was mad ...

    Re: Should I add a brush sander to the back of my wide belt sander?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/14) -- I am not an expert by any stretch but there are a lot of things at play here. Size ...

    Re: Should I add a brush sander to the back of my wide belt sander?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/14) -- One issue I see here is the sequence of your belts. You are likely putting too dee ...

    Makita 2012NB Angles
    A message posted at WOODWEB's Solid Wood Machining Forum (8/14) -- Makita 2012NB. Any experts know the below angles for this machine. Thanks. a) cutt ...

    new shapers
    A message posted at WOODWEB's Solid Wood Machining Forum (8/14) -- anyone have an idea why some of the new shapers have a middle speed of 5000 instea ...

    Re: What cutterhead for Panel Raising?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/14) -- I use an Innovator head for my raised panels. It's a nice large diameter head and ...

    Re: Choosing wood species for laundry rack design
    A message posted at WOODWEB's Value Added Wood Processing Forum (8/14) -- Greg, Bamboo most certainly can be drilled, milled, finished etc. to make w ...

    Re: Beaded Frames
    A message posted at WOODWEB's Solid Wood Machining Forum (7/14/24) -- I usually use 1-1/2" S4S on the frames and 5/16"x 13/16" beaded ...

    Manolin MV300
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/14) -- Does anyone know where I can find 4 x 10 Manolin MV300 laminate by Pioni ...

    Re: How useful is +46/-46 deg tilt function on a panel saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (7/14) -- Thanks Allen I have ordered the double tilt panel saw. ...

    Re: slot mortiser
    A message posted at WOODWEB's Solid Wood Machining Forum (7/14) -- Hello, I have a Knappy (sold by Laguna) slot mortiser for sale here in San Diego, ...

    Re: slot mortiser
    A message posted at WOODWEB's Solid Wood Machining Forum (7/14) -- Hello, I have a Knapp (sold by Laguna) slot mortiser for sale here in San Diego, C ...

    Re: Making Rounded Coffin Top
    A message posted at WOODWEB's Solid Wood Machining Forum (7/14) -- Thanks to Mr. Leo and Newton, Most of the info is already in my mind, but still I ...

    Re: Buying a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (7/14) -- You've asked just enough questions to fill an entire book. Sounds as if you have z ...

    Routing color layer off hpl...
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/14) -- I have a project that requires routing a groove in Nevamar laminated flo ...

    Re: Routing color layer off hpl...
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/14) -- A while back. There was a discussion about cutting laminate and what bit ...

    Re: Material Shortages/Pricing
    A message posted at WOODWEB's Business and Management Forum (6/14) -- Sounds like if its an across the board increase it may cover the increased cost ...

    Re: Platen question on widebelt
    A message posted at WOODWEB's Solid Wood Machining Forum (6/14) -- Most important is once you have sander set, back it off some. Almost ALL sanding p ...

    Re: Rejuvinating Molder feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/14) -- A light touch and a close eye. We have We have 80 grit on the sander and it seems ...

    Re: Rejuvinating Molder feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/14) -- Hi Ron: Jeff D has recommended a good option. The system he mentions uses a reusab ...

    PUR glue for edgebanding
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/14) -- So based on all my research & minor experience it seems like the bes ...

    Re: Rejuvinating Molder feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/14) -- I dont have time to order new ones at the moment, so i tried the 80 grit paper. Th ...

    Re: Rejuvinating Molder feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/14) -- In my first response I mentioned it takes more than a slight sanding. By hand or o ...

    Re: Rejuvinating Molder feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/14) -- We sand them on the edge sander with like new results. You can easily see the glaz ...

    Re: Rejuvinating Molder feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/14) -- gary, how in the world do you sand the rolles on the edge sander without flat spot ...

    Re: bridgewood 20" planer
    A message posted at WOODWEB's Solid Wood Machining Forum (6/14) -- I'm running it straight through...had this dude 15 yrs and no telling how many ft ...

    bridgewood 20" planer
    A message posted at WOODWEB's Solid Wood Machining Forum (6/14) -- planers wanting to roll stock when i feed it on edge?? Any thoughts on a solution? ...

    Re: bridgewood 20" planer
    A message posted at WOODWEB's Solid Wood Machining Forum (6/14) -- Are you feeding the stock straight in? If fed at an angle it will roll. ...

    Re: Three phase question
    A message posted at WOODWEB's Solid Wood Machining Forum (5/14/23) -- The having a motor running is for when you have a static convertor. If you star ...

    Re: grizzly shaper trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (5/14/22) -- To add to what Rich said, if the the fence halves are not in the correct plane, ...

    Re: grizzly shaper trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (5/14/22) -- Do you have a spring loaded fence that helps hold the stock against the outboar ...

    HPL over HPL Adhesive
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/14) -- I work on Yachts. Have a situation with some horizotal interior surfaces ...

    Re: Warping
    A message posted at WOODWEB's Solid Wood Machining Forum (5/14) -- D Brown is right, but.... That is true only if the lumber is not dried properly. H ...

    Re: Warping
    A message posted at WOODWEB's Solid Wood Machining Forum (5/14) -- It is possible that the lumber was surfaced or brought to the current thickness by ...

    Re: Weinig "CombiHead" or equivalent
    A message posted at WOODWEB's Solid Wood Machining Forum (5/14) -- David, We have a Martin T90 that uses a similar system. This machine is a differen ...

    Re: Weinig "CombiHead" or equivalent
    A message posted at WOODWEB's Solid Wood Machining Forum (5/14) -- Thanks Joe. Looks interesting. For both the Combi and the one you show I can them ...

    I have to make my own moulder knives. What's the best way?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/14) -- I make knives from HSS using an old SCMI knife grinder, with ceramic discs. Some o ...

    Re: Chipping/splitting on edge of casing, American beech
    A message posted at WOODWEB's Solid Wood Machining Forum (5/14) -- The first thing to do is to check the MC with either an oven test or a pinless moi ...

    Chipping/splitting on edge of casing, American beech
    A message posted at WOODWEB's Solid Wood Machining Forum (5/14) -- We are having a problem with chipping/splitting on the left edge (thin side) of ca ...

    Re: Chipping/splitting on edge of casing, American beech
    A message posted at WOODWEB's Solid Wood Machining Forum (5/14) -- Thank you for the response! Dry, brittle wood is something that we have considered ...

    Re: Chipping/splitting on edge of casing, American beech
    A message posted at WOODWEB's Solid Wood Machining Forum (5/14) -- The 6% MC value does indeed indicate over dried wood. If 4% MC it will read 6%. ...

    Re: Trying to learn how to do colored laminations for my business
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/14) -- Not sure who made that stock. It sure is beautiful though. Any ideas whe ...

    Re: Water cooled spindle in router table?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/14/24) -- I wouldn't suspect that what you called "cheap" spindle would have an ...

    Re: Water cooled spindle in router table?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/14/24) -- First off what kind of router motors are you using? I have several 7518 and 751 ...

    Re: What does your shop use for crosscutting face frame stock?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/14/23) -- Sled on my tablesaw with a digital gauge. Longer than 50" I bind them toge ...

    Re: Dimples/Pimples
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/14) -- I would encourage you to get a tour of Wilsonart's laminate facility and ...

    Northtech shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (4/14) -- Just Bought a used shaper from Northtech but the spindle wrench is missing, wonder ...

    Re: best way to move powermat 700 into place from the crate
    A message posted at WOODWEB's Solid Wood Machining Forum (4/14) -- Ian report back on what you ended up doing please. ...

    Re: Three S (?) programs
    A message posted at WOODWEB's Business and Management Forum (4/14) -- Tim, did you forget to hug your staff while you were humming kumbaya? I am just ...

    Re: Original 3-1/4 HP Plunge Router Flush Bit
    A message posted at WOODWEB's Solid Wood Machining Forum (4/14) -- This is not normal after two days use. I would check to make sure you are not runn ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14/25) -- A little bit more information. They pushed a head into the fence. We realigned ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14/25) -- The radius doesn't match. By definition it's not a snipe. I have never seen thi ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14/25) -- Without real answers to each of my questions above, I cannot move forward. Good ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14/24) -- It's not set up yet Dave but I've attached a sketch showing what I provisionall ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14/24) -- I guess I was a bit approximate with the sketch Rich. The fence would be pushed ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14/24) -- You will have major blowout on the back edge, and that gap between the fences w ...

    Re: Martin T17F
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14/22) -- Thanks Joe, I really appreciate you doing all that. It’s extremely helpful. Goo ...

    Re: Martin T17F
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14/22) -- John, Part # for nut - 184-071-00 T75-28 Nut main arbor. If this doesn’t work I ...

    Re: Multi gang rip saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14/22) -- Tipper - I think most shops that do much of anything would buy their lumber by ...

    Re: Multi gang rip saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14/22) -- I honestly don’t see the need for a gang rip saw unless you are a high producti ...

    Re: Questions about New Thickness Planer Options
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14) -- The format is a wonderful $12k planer. It's too bad they cost $18k. I have one, I ...

    newman EPR 600
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14) -- I'm trying to decide between a Newman EPR 600 or a Cantec carpet feed planer ...

    Re: Bandsaw Blade width Optimum for resawing door stile skins
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14) -- We run the 1" Lenox carbon steel blades on our 18" resaw. The small diam ...

    S4S Moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14) -- I'm new to shopping for an S4S moulder. Can anyone answer me 2 questions and maybe ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14) -- When I prepare material to glue on a moulder, I will generally run the feed a litt ...

    Re: Veneering a Luan door
    A message posted at WOODWEB's Cabinetmaking Forum (3/14) -- Is this door: Interior or exterior? Solid core or hollow core? Passage or cabinet? Finish ...

    physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14) -- Table saw kick back seems to be seperated into two categories: 1) straight line ki ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14) -- In this scenario you will most often get a linear result, but not necessarily. Whe ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14) -- David, I get where you are going, but they do surprise me sometimes! Being armed w ...

    Re: Safety Speed 37" wide belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14) -- Not familiar with the specific machine, but I will say 15hp sounds low for wide sl ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14) -- If simple common sense doesn't work, I don't think physics is going to help. If yo ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14) -- I just bought a table saw with a riving knife. 30 yrs on and had never even seen o ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (3/14) -- I was taught to straight line wany edge lumber freehand on a 16" rip saw when ...

    Preventing chip-out on wrapped walnut veneer edges
    A message posted at WOODWEB's Cabinetmaking Forum (2/14/26) -- Walnut veneer edge chip-out – advice appreciated We’re fairly new to veneering and it’ ...

    Re: Resaw bandsaw blade sharpening service
    A message posted at WOODWEB's Solid Wood Machining Forum (2/14/22) -- Very few regrind shops sharpen woodworking bandsaws anymore. The cost new vs. R ...

    Re: Resaw bandsaw blade sharpening service
    A message posted at WOODWEB's Solid Wood Machining Forum (2/14/22) -- Will the machine with automatic tool changer be considered? ...

    Re: Resaw bandsaw blade sharpening service
    A message posted at WOODWEB's Solid Wood Machining Forum (2/14/22) -- Dave Rakauskas. Thank you, I will contact them. ...

    Re: Corian Sinks
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/14) -- Thank you all for the recommendations. I make a few of these every 1 or ...

    Re: resource for basic shaper speed/feed info?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/14) -- This article may help you, the calculations are for industrial moulders but a shap ...

    Re: Corian Sinks
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/14) -- A good scratch stock scraper helps too. An old wood working tech, but wh ...

    Re: What Kind of Wood is this?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/14) -- Seems like alder to me too. ...

    Re: Panel Saw Blades
    A message posted at WOODWEB's Solid Wood Machining Forum (2/14) -- HI Andy, we also have a compact and use 80T triple chip blades from Amana and Age, ...

    Re: Panel Saw Blades
    A message posted at WOODWEB's Solid Wood Machining Forum (2/14) -- Hi Paul, Here it is. You have scoring so you'll be fine but I don't think any blad ...

    Re: corian tops
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/14) -- The best way would be with a mason miter. You'll need to glue in a piece ...

    Metal Detector For Staples!
    A message posted at WOODWEB's Solid Wood Machining Forum (2/14) -- I plane alot of rough sawn clear cedar, and I'm getting tired of ruining my knives ...

    desparately need a resaw solution
    A message posted at WOODWEB's Solid Wood Machining Forum (2/14) -- No matter what I do I cannot achieve accurate resaw cuts on 8/4 hardwood blocks (1 ...

    Re: 6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14/26) -- Dear Alan, Dustin and Jason have pointed out two crucial areas: spindle bearing ...

    Re: 6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14/26) -- Did you get it figured out? What was the problem? ...

    Re: Spraying Solid Wood Raised Panels
    A message posted at WOODWEB's Finishing Forum (1/14/24) -- Are we talking cabinet doors? Should have a very small radius from the cutters on the rail ...

    Re: What Kind of Wood is this?
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14) -- Select alder, but check it by how soft it is on the back bottom of a drawer front. ...

    Re: Quick lock insert moulder head
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14) -- Dave Both Weinig and Quick lock are quality built cutter heads, we offer both styl ...

    Re: broken bandsaw blades
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14) -- William, your info seems technically well informed--thanks. If I could distill a b ...

    Re: Problems with Wilsonart Traceless laminate-- very brittle.
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/14) -- Hi Matt, we are getting a lot of chip out with this material as well. We ...

    Re: Best tool for half laps
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14) -- If you need/desire extreme accuracy, scribe lines with a knife for the crossing pi ...

    Re: finding the right stud
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14) -- Assuming you are talking about threading your stud into the knob then Red Loctite ...

    Re: Best tool for half laps
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14) -- This is one operation an old school Radial arm saw with a dado head would be great ...

    Re: Designing a Large Slab Planer/Flattener
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14) -- Joe, I am using a 100mm insert cutter, Leitz. My feed rate is set to 6 meters per ...

    Re: Designing a Large Slab Planer/Flattener
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14) -- There's a company in Australia that has designed and built what you're describing. ...

    Re: Designing a Large Slab Planer/Flattener
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14) -- Bruce and CNC, how much do you take off in a single pass with the spoilboard cutte ...

    Re: 45º shaper tooling question
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14) -- You will be a lot happier with insert tooling. We can use a harder grade of carbid ...

    Smartlister and Tenons
    A message posted at WOODWEB's CAD Forum (1/14) -- I'm trying smartlister on some fixed shelves (3d Solids) which have a tenon on each end. When I exp ...

    Re: Buss 44 grinder attachment wheel source??
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14) -- Hi James: The pink wheel won't work on carbide. Most Buss planers I'm aware of hav ...

    Re: Buss 44 grinder attachment wheel source??
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14) -- Hi James: Thanks Dave for the referral. We stock these grinding wheels for the Bus ...

    Re: Buss 44 grinder attachment wheel source??
    A message posted at WOODWEB's Solid Wood Machining Forum (1/14) -- Thanks for the response guys! Chuck, I had seen those wheels on your site, but I d ...

    Re: wilsonart 500 sprayable?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/14) -- WA 500 is blended to be a rolling/brush contact. It is not made to spray ...

    Re: Air Compressor Troubleshooting
    A message posted at WOODWEB's Solid Wood Machining Forum (12/13/22) -- With a clogged filter I would inspect the tank for any rust and also the condi ...

    Re: kerf bending wood, (tapered ball end mill).
    A message posted at WOODWEB's Solid Wood Machining Forum (12/13/21) -- Ball-end milling cutters are widely used in all kinds of curved surfaces, arc ...

    Shelix head balance issue?
    A message posted at WOODWEB's Solid Wood Machining Forum (12/13) -- I have a Shelix shaper head, 3" diam by 4" long. It cuts great, but alw ...

    Re: Shelix head balance issue?
    A message posted at WOODWEB's Solid Wood Machining Forum (12/13) -- Years ago I bought some of the same hands. One ran just fine, the other had a nas ...

    Re: Rip fence modification
    A message posted at WOODWEB's Solid Wood Machining Forum (12/13) -- Grab the damaged parts and head to a machine shop. I have found this to be the be ...

    Sawstop power loss
    A message posted at WOODWEB's Solid Wood Machining Forum (12/13) -- We have a 5 hp 3 phase Sawstop that is losing power. Much less power than usual. ...

    Re: Sawstop power loss
    A message posted at WOODWEB's Solid Wood Machining Forum (12/13) -- Test all 3 power leads, sounds like 1 phase has dropped out, which will cut power ...

    Re: Sawstop power loss
    A message posted at WOODWEB's Solid Wood Machining Forum (12/13) -- Is it slipping or bogging down ? ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (12/13) -- I've been setting machinery professionally for over 35 years. You always go down ...

    Re: Perske 3 phase motor 230/460 V
    A message posted at WOODWEB's Solid Wood Machining Forum (11/13) -- There is more to it than that. One can be purchased for $250. https://www.gamut.c ...

    Thermofoil Press
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/13) -- What is the best thermofoil press on the market for large industrial ca ...

    Re: Light Duty Shaper Comparisons
    A message posted at WOODWEB's Solid Wood Machining Forum (11/13) -- Thanks Bob for the visual, it really puts things into perspective. I did some che ...

    Re: sliding shaper advice
    A message posted at WOODWEB's Solid Wood Machining Forum (10/13) -- We have a Felder F700Z with a slider and we do a lot of raised panel doors . Its ...

    Re: Gang ripsaw outfeed chain
    A message posted at WOODWEB's Solid Wood Machining Forum (10/13) -- We disassembled our gang a few years ago in favor of a smaller system. However th ...

    Re: Large veneered doors substrate and max. size
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/13) -- Hi Robert, Actually, I like MDF too, but you indicated you have had iss ...

    Re: Large veneered doors substrate and max. size
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/13) -- Robert, The size doesn't really matter, it's the construction that matt ...

    Weinig Profimat 23
    A message posted at WOODWEB's Solid Wood Machining Forum (10/13) -- It took 18 years to get a CNC router and now finally we are getting a Weinig mold ...

    Re: Weinig Profimat 23
    A message posted at WOODWEB's Solid Wood Machining Forum (10/13) -- Weinig has (or at least used to) a class for new owners of their machines. In Nor ...

    Re: Large veneered doors substrate and max. size
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/13) -- Thanks John! What would you say the benefits of a particle board core w ...

    Re: Band Saw Guide Bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (10/13) -- Great! Thanks. ...

    Re: Corian Counters
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/13) -- I did something similar to a concrete countertop that I built on top of ...

    small cedar display case am I ok building
    A message posted at WOODWEB's Solid Wood Machining Forum (9/13) -- hello I just want to make sure I am not making a mistake on small cedar display ca ...

    Re: Last bottom knife - really necessary?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/13) -- David, Jay thanks for the input. What brand / type of lube do you use that evapora ...

    Re: Widebelt abrasive suppliers...
    A message posted at WOODWEB's Solid Wood Machining Forum (9/13) -- 43x75 is a pretty common size. I order belts through HDL when I order hardware. I ...

    Re: Groovers o.k. for tenoning?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/13) -- Yeah I guess I am with Dave on this one. One of my first thoughts were if the shar ...

    Re: Groovers o.k. for tenoning?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/13) -- Just for kicks I had some old style groovers laying around and tried those. I thin ...

    Re: Groovers o.k. for tenoning?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/13) -- One advantage of the insert tooling over reworked dado sets is that the insert too ...

    Planer rolls
    A message posted at WOODWEB's Solid Wood Machining Forum (9/13) -- Does anybody know who or where to send planer rolls to be redone as new. This is f ...

    Stenner bandsaw blades
    A message posted at WOODWEB's Solid Wood Machining Forum (8/13/25) -- I just recently purchased a VHM 36 Stenner band saw. The only source for blades ...

    Re: SCM shaper spindle swap
    A message posted at WOODWEB's Solid Wood Machining Forum (8/13/25) -- You might find spindle interchangeability between models tricky, as taper and l ...

    Re: Shaper spindle
    A message posted at WOODWEB's Solid Wood Machining Forum (8/13/23) -- You probably cross threaded the spindle when you put it back in. Carefully insp ...

    Re: Buying a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (8/13) -- Hey JB, Could you elaborate on why you prefer it over Wienig and what other costs ...

    What cutterhead for Panel Raising?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/13) -- Hi, I just started running cabinet doors this past year, and I was wondering what ...

    Re: What cutterhead for Panel Raising?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/13) -- I've had the Freeborn cope and stick insert heads since they were the two wing des ...

    Beaded Frames
    A message posted at WOODWEB's Solid Wood Machining Forum (7/13/24) -- Hello to all, I am curious what type of equipment is out there for beaded inset ...

    Re: Widebelt abrasive suppliers...
    A message posted at WOODWEB's Solid Wood Machining Forum (7/13/23) -- We stock 43" x 75" wide belts and can usually ship the same day you o ...

    SCM 20" Planer with spiral head
    A message posted at WOODWEB's Solid Wood Machining Forum (7/13/23) -- Does anyone have a SCM 20" planer with a spiral head with 9 HP ? Is 9HP en ...

    Re: Shop based miter saw length gage
    A message posted at WOODWEB's Solid Wood Machining Forum (7/13) -- I used a proscale for years on my RAS. https://www.proscale.com/products/industry- ...

    Re: CM 72 manual
    A message posted at WOODWEB's Solid Wood Machining Forum (7/13) -- Aaron, On my machine I tapped two holes in the edge of the table facing the chuck. ...

    Scm T130nps
    A message posted at WOODWEB's Solid Wood Machining Forum (7/13) -- Hey Guys. looking for some misc. small and not so small parts for a 2000~2002 era ...

    Re: substrates
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/13) -- What are you planning to go over...you "can" laminate laminate ...

    Re: Hook angle vs cutting angle results?
    A message posted at WOODWEB's Solid Wood Machining Forum (6/13/22) -- If you have a piece of molding to match. You can cut the end off at 20 degrees ...

    Re: drilling cast iron shaper tables
    A message posted at WOODWEB's Solid Wood Machining Forum (6/13) -- It's really hard to say without some details like where it is going to be mounted, ...

    Re: Lauderdale-Hamilton 40 HP Gang Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (6/13) -- Make sure all the anti- kickback measures are in order. I do not know that particu ...

    Re: color core laminate & edging
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/13) -- Thanks that's what I thought but all I can find is wilsonart 700 which i ...

    Re: Rejuvinating Molder feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/13) -- Replacing them would be the best option. In the short term spray on some contact c ...

    Re: color core laminate & edging
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/13) -- I buy spray grade Formica adhesive (clear) in five gallon buckets. Using ...

    Re: color core laminate & edging
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/13) -- clear contact cement. ...

    Re: white contact cement
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/13) -- Solvent based adhesives are a mixture of ingredients (typically polymers ...

    moulder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (6/13) -- Hey guys, just read posts oncutterheads but here's my situation. Just bought an ol ...

    Re: widebelt sanding maple
    A message posted at WOODWEB's Solid Wood Machining Forum (5/13/23) -- I forgot my feed is 20 meter per min. what feed would you recommend. ...

    Re: Solid wood nesting tooling
    A message posted at WOODWEB's CNC Forum (5/13/22) -- HOLZ-HER's nesting technology ensures efficient formatting and drilling on one machine. Here the ...

    Re: grizzly shaper trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (5/13/22) -- There are two fences on the machine, they are definitely split in the center co ...

    Re: grizzly shaper trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (5/13/22) -- Also check that your spindle speed is on the faster setting. I remember once I ...

    Re: Solid wood nesting tooling
    A message posted at WOODWEB's CNC Forum (5/13/22) -- Skylarker and Acctek... What does anything you wrote have to do with the original question? ...

    Re: grizzly shaper trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (5/13/22) -- Outboard fences are continuous and not split. ...

    Apply Epoxy or wood glue on the end grain before finishing my sign
    A message posted at WOODWEB's Finishing Forum (5/13) -- I am making an indoor sign with several kiln-dried 7% glued-up quartersawn wood boards. I pla ...

    Warping
    A message posted at WOODWEB's Solid Wood Machining Forum (5/13) -- I have been working with wood all my life. Since the 1960's. And I have always had ...

    Re: Warping
    A message posted at WOODWEB's Solid Wood Machining Forum (5/13) -- Remember - wood only changes shape in response to changes in moisture in its envir ...

    Re: Warping
    A message posted at WOODWEB's Solid Wood Machining Forum (5/13) -- I would expect B. The way to remember is the rings are trying to straighten out. T ...

    Re: Warping
    A message posted at WOODWEB's Solid Wood Machining Forum (5/13) -- That's what I always remembered thinking the grain circles want to flatten out so ...

    Re: Venner or Solid?
    A message posted at WOODWEB's Cabinetmaking Forum (5/13) -- Rather than risking the thick veneer over stable substrate, IF you do it, I would suggest ...

    Re: Reset jointer knives, edge is perfect, but face isnt
    A message posted at WOODWEB's Solid Wood Machining Forum (5/13) -- Just a quick comment here...the head on the 54A is the worst design for a head EVE ...

    Re: Trying to learn how to do colored laminations for my business
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/13) -- Those laminations are dyed before layup. they are soaked ain a dye that ...

    Water cooled spindle in router table?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/13/24) -- Just scrapped by 2nd 4.25" router body after the bearings proved impossibl ...

    Re: best way to move powermat 700 into place from the crate
    A message posted at WOODWEB's Solid Wood Machining Forum (4/13) -- there are colored ribbons through the castings showing where the straps should be ...

    Re: corian rye adhesive color
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/13) -- i found out that the corian adhesive color is concrete ...

    Re: WIDE BELT SANDER INFO
    A message posted at WOODWEB's Solid Wood Machining Forum (4/13) -- Adam, I just purchased a new Viet 2 head unit and after much debate I was advised ...

    Original 3-1/4 HP Plunge Router Flush Bit
    A message posted at WOODWEB's Solid Wood Machining Forum (4/13) -- I know nothing about woodworking, and just bought a 3-1/4 HP Plunge Router and it ...

    Re: Inventor vs. Solidworks
    A message posted at WOODWEB's CAD Forum (4/13) -- Thanks for both of your responses. The information regarding the add-ons is helpful. I am concerned ...

    Re: Best blade design to prevent "pull" on radial arm saws
    A message posted at WOODWEB's Solid Wood Machining Forum (4/13) -- Use a blade with at least a negative 5 degree hook. Negative 6 is better still. Th ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13/25) -- What am I looking at? Your photos are worthless without an explanation. Please ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13/25) -- I think we might have figured it out. The infeed fence was out of alignment som ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13/25) -- Ok So I lied I thought we had it. Now we are having this problem. ...

    Re: Bandsaw SCM Formula s640p Blade guides question
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13/24) -- Hi M. My experience is with a UK spec Aggazani NRA 600 (24in) which runs simila ...

    Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13/24) -- Hi all. We run a light Hammer F3 shaper with 30mm spindle and sliding table but ...

    Digital Footage Counter
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13/24) -- Hi, I am wanting to put a digital footage counter on my gang ripsaw. I have see ...

    Cabinet vision Solid Ultimate Version 11
    A message posted at WOODWEB's Cabinetmaking Forum (3/13/24) -- Can anyone help me to get rid of the annoying lines on the cabinets in elevation mode. ...

    Re: Shaper Set Up to Cut Wide Channel - Is This OK?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13/24) -- Sounds fine. A pic would really help ...

    Re: Source for prelaminated panels with realistic faux walnut?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/13/23) -- Daniel, thanks, I appreciate the effort! I Have found some other cand ...

    Problem With Osai Interface Screen
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13/23) -- We have a problem with Osai Belinkk Interface screen. The screen have a yellow ...

    Re: Martin T17F
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13/22) -- John, I will get you a part number for the nut. The nut is the same as what my ...

    Small Cross Cut Sled - Versatile and Precise with 5-cut method
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- I made a standard size crosscut sled, then found that I was often cutting smaller ...

    Re: Sunhill shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- I know that 90’s era powermatic and Grizzly spindles are interchangeable. ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- I don't make panels anymore, but when I did I used the moulder to prep the blanks ...

    Belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- I'm using a small 4x36 belt sander mainly to sand severals glued pieces of wood bu ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- We rarely get a sliver kick back, but even with multiple rows of pawls, a few have ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- I agree with the other guys. Sounds like you've got dull knives. They beat the woo ...

    Re: moulder vs planner
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- We do not run a single thing through our moulders without planing them first. Yes, ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- I used to have one of those behemoth De Walt radial arm saws, a massive beast that ...

    Re: Can a bandsaw replace a table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- Well here's the problem: You post has context ( Ripping), but lacks specificity. R ...

    Re: will it work (repair question)?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/13) -- I'm actually surprised by the sheer size of your solid-slab glue-up that you ...

    Re: Am i being too picky
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- The question of whether a gap ( in the middle) of the two boards is not so simple ...

    Re: What do you do with your bent lumber?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- Rip it thin and use in bent laminations? ...

    Re: Sanding SS sink
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/13) -- In august we will have an electric sander for sale that has the same han ...

    Re: jointer question
    A message posted at WOODWEB's Solid Wood Machining Forum (3/13) -- You will most likely pay more for a bare bones jointer. Machines are packaged with ...

    Re: edge sanders
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13/26) -- I also had an Oakley and while they're nice machines be aware that some of them ...

    Re: Snipe on widebelt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13/25) -- I agree that your problem is probably improperly set rollers. Same thing will h ...

    Re: Whitney Planer Slipping With Yellow Pine
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13/24) -- There are lots of different types and brands of products out there to deal with ...

    Re: Stroke Sander: Good for finish sanding?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13/24) -- Grothouse has made a name for itself in the interior design and fine furnishing ...

    Resaw bandsaw blade sharpening service
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13/22) -- Hi Guys, looking for a referral for a sharpening service that does Stellite too ...

    Re: Resaw bandsaw blade sharpening service
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13/22) -- Look for bandsaw sawmill blade suppliers. ...

    Re: Wood Species?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13) -- No, I'm not going to be modifying the existing cabinets at all. We are building ca ...

    Re: Wood Species?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13) -- Your going to have to physically put your hands on the project before you build it ...

    Re: resource for basic shaper speed/feed info?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13) -- Bruce Hoadley's "Understanding Wood" is fundamental and will help answer ...

    Re: Corian Sinks
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/13) -- If you have access to the continuous joint edge during fabrication (no c ...

    Re: resource for basic shaper speed/feed info?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13) -- Whenever possible it is helpful to have the original manuals for trouble shooting ...

    Re: weinig powermat 1500 cut-stock tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13) -- Keizzer It is typical for 1/4" over on the width and 3/16" on the thickn ...

    Re: weinig powermat 1500 cut-stock tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13) -- Our end products are window and door stile and rail parts. They have to be pretty ...

    Re: 72'' or longer straight metal bar
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13) -- Crain make one for carpet. ...

    Re: Dial indicator
    A message posted at WOODWEB's Solid Wood Machining Forum (2/13) -- Hi Mike: Here's some information on a few of the knife setting jigs we offer. The ...

    Mortise machine
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13/24) -- I’m looking at a used General International mortise machine. The photo of it ha ...

    Re: Need supplier of 1.5" radius postformed tops - Qty 700
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/13/23) -- Joe, The Marshfield countertop companies are not wanting to do it bec ...

    Re: Need supplier of 1.5" radius postformed tops - Qty 700
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/13/23) -- Dave, have you tried Counterform in Marshfield? ...

    Altendorf choice dilemma
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- I find myself faced with a first world choice problem. I’m looking at two sliders. ...

    Re: What Kind of Wood is this?
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- I agree with Alder. If it was hard maple we should see some flecks somewhere on a ...

    What Kind of Wood is this?
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- Trying to build a cabinet to match these. Can anyone tell me what this wood is fro ...

    Re: What Kind of Wood is this?
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- Looks like alder to me. ...

    Re: What Kind of Wood is this?
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- Hard maple? ...

    Re: Quick lock insert moulder head
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- Thanks for the response. I'm trying to decide between the quick lock head and wein ...

    Re: Quick lock insert moulder head
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- I actually don't use those but they would be for resetting to a dimension that you ...

    Re: turn planed wood waste into product
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- One thing to be aware of, if you plane any black walnut, those shavings should nev ...

    Re: Best tool for half laps
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- Hi Ken, thanks for your response. The lengths vary from 2-12 feet in length with o ...

    Designing a Large Slab Planer/Flattener
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- So I am in the beginning stages of trying to design a tool to ease the process of ...

    Re: Designing a Large Slab Planer/Flattener
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- I have been using a CNC to flatten live edge slabs since '99. I use a spoil board ...

    Re: Designing a Large Slab Planer/Flattener
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- By the time you invest your time, money and resources into this thing you could bu ...

    Re: Scraps
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- It all comes down to the most cost effective way for you. If your a small company ...

    edge banding 1 1/2" strips & clean up
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/13) -- we are using outsourced parts 1/2" melamine pvc edge banded ? 1 is ...

    Re: edge banding 1 1/2" strips & clean up
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/13) -- 1.5 x 8.5 is too small for a lot of edge banders, if you are doing all 4 ...

    Re: 3 phase rotary converter for weinig p22 & dust collection
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- Typically rotary phase converters are rated by the largest single motor they will ...

    Buss 44 grinder attachment wheel source??
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- Hello! My company recently bought a Buss Model 44 planer that came with a grinding ...

    Re: Buss 44 grinder attachment wheel source??
    A message posted at WOODWEB's Solid Wood Machining Forum (1/13) -- Woodtech enterprises inc. has them.They have an online site ...

    Re: Bench grinder bristle wheels for wood (not steel)
    A message posted at WOODWEB's Solid Wood Machining Forum (12/12/24) -- https://www.sand-rite.com ...

    Re: Sold Surfacing Question
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/12/23) -- Feel free to contact us if you have any questions, would love to hel ...

    Re: Air Compressor Troubleshooting
    A message posted at WOODWEB's Solid Wood Machining Forum (12/12/22) -- Filter or regulator. Look at both. Another possibility is that any black iron ...

    Re: Air Compressor Troubleshooting
    A message posted at WOODWEB's Solid Wood Machining Forum (12/12/22) -- Thanks, all. Replaced the filter and now all good. Again, Thanks! ...

    Re: Moving blade gang rip saws
    A message posted at WOODWEB's Solid Wood Machining Forum (12/12/21) -- Anyone have any thoughts or input on this? Thanks ...

    Planer blade height
    A message posted at WOODWEB's Solid Wood Machining Forum (12/12) -- I recently acquired shop space that includes a Yates American J-180 planer. The b ...

    Re: Planer blade height
    A message posted at WOODWEB's Solid Wood Machining Forum (12/12) -- Hey David. I have a Grizzly 20" planer. I use the woodstock planer pals. The ...

    Re: Machining brass and wood
    A message posted at WOODWEB's Solid Wood Machining Forum (12/12) -- Good thought Geoff. We will be on the lookout for that and maybe do some testing ...

    Re: How to clean panels prior to lamination
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/12) -- Kyle, There are feed through panel cleaners that are on the market.... ...

    Re: How to clean panels prior to lamination
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/12) -- I would recommend you install a fluorescent fixture near table height b ...

    Re: Stroke anding technique
    A message posted at WOODWEB's Solid Wood Machining Forum (11/12) -- I have a similar problem with my Mini Max L55, which has a lever operated platen. ...

    Perske 3 phase motor 230/460 V
    A message posted at WOODWEB's Solid Wood Machining Forum (11/12) -- I building the sawmill and want to use Perske 3 phase 230/460 V 7.5 hp motor, wit ...

    Re: Thick laminate material
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/12) -- It could be Nuvacor or one of the new acrylics or something like 3Form. ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/12) -- ok. That is what I was thinking. I have to see if we can do that. For some reason ...

    Re: Solid walnut countertop
    A message posted at WOODWEB's Architectural Woodworking Forum (11/12) -- island top 54" width 8/4 German Beech , undermount hammered copper prep ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/12) -- Sanding maple sux lol. Like stated above there are many reasons for this. I wonde ...

    Re: Solid walnut countertop
    A message posted at WOODWEB's Architectural Woodworking Forum (11/12) -- here's a vanity top with undermount Kohler Verticyl lavs, species is (face g ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/12) -- we increased the speed on the motor of our dust collection system. We can do this ...

    Re: Solid walnut countertop
    A message posted at WOODWEB's Architectural Woodworking Forum (11/12) -- previously described Vanity top, + copper sink in 54"w island top ...

    Re: Solid walnut countertop
    A message posted at WOODWEB's Architectural Woodworking Forum (11/12) -- where's your job located? ...

    SCMI Syntex 4 sided planer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/12) -- Hi Everyone, I'm looking to buy a used SCMI Syntex 4 sided planer.Does anyone hav ...

    Re: Wilsonart "traceless" silver velvet and edge bander?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/12/23) -- Im with tyler. We ran this on a few jobs. Its so expensive it makes ...

    Re: CNC through protective film
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/12/21) -- Thanks John, I had always been more concerned with film side up whic ...

    ColorCore Cabinet door fabrication and edgebanding
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/12/21) -- Good Afternoon, When working with ColorCore, Solicor or any other th ...

    Re: spindle nut
    A message posted at WOODWEB's Solid Wood Machining Forum (10/12/21) -- A proper machine shop can make that in just an hour or two. If you have them m ...

    Re: Band Saw Guide Bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (10/12) -- Carter Guides are what you need!... Watch this video, you'll become an expert. ...

    Re: Epoxy Resin - Lab Countertop Suppliers??
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/12) -- There are really only a few manufacturers, try the guys in the link bel ...

    Re: Matching V-belts
    A message posted at WOODWEB's Solid Wood Machining Forum (9/12/25) -- Hey, not sure if you’re still looking since it’s been a while, but if you are, ...

    Re: Jointer Setup
    A message posted at WOODWEB's Solid Wood Machining Forum (9/12/21) -- You use a bench top jointer in a commercial business? Time to buy real machiner ...

    Re: Solid 3/4 to 3/4 veneer
    A message posted at WOODWEB's Veneer Forum (9/12) -- I don't think you/he are making sense. 3/4" thick CVG Doug Fir laminated to 3/4" Doug ...

    Re: Solid 3/4 to 3/4 veneer
    A message posted at WOODWEB's Veneer Forum (9/12) -- Thanks for the candor. I already suggested some sensible alternatives and hoped someone would ri ...

    Re: Straight line rip saw personal safety solutions
    A message posted at WOODWEB's Solid Wood Machining Forum (9/12) -- Hello Justin, I am one of the owners of Cantek. Over the years we have developed a ...

    Re: Buying a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (9/12) -- Honestly for that small of runs I would get a woodmaster moulder planer. I had 3 o ...

    Re: Straight line rip saw personal safety solutions
    A message posted at WOODWEB's Solid Wood Machining Forum (9/12) -- Justin, That's good, just make sure you're not missing any. I'm going to ask one o ...

    Re: Rejuvinating Molder feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (9/12) -- Have you ever heard of fedron. It is a rubber rejuvenater. I first used it when I ...

    Re: Last bottom knife - really necessary?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/12) -- To me using the last bottom head takes away the reference point. You don't use a j ...

    parts for SCMI P170 or P230
    A message posted at WOODWEB's Solid Wood Machining Forum (9/12) -- I'm looking for a source for parts for a SCMI P170 or P230. Example: the gears to ...

    Re: Straight line rip saw personal safety solutions
    A message posted at WOODWEB's Solid Wood Machining Forum (9/12) -- I check the machine today and we actually already have the rubber inserts installe ...

    Re: pricing moldings/s4s/flooring
    A message posted at WOODWEB's Solid Wood Machining Forum (9/12) -- We used a simple spreadsheet. You apply all your variables such as waste and cost ...

    Re: desparately need a resaw solution
    A message posted at WOODWEB's Solid Wood Machining Forum (9/12) -- I would replace whatever blade you're using with a TriMaster 1/2" -3 TPI blad ...

    Re: Wood Glide lubricant
    A message posted at WOODWEB's Solid Wood Machining Forum (9/12) -- Perfect timing - this was on my list of stuff to get. Thanks, Chuck. ...

    Re: laminating a 1/2" inside radius...
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/12) -- Yes it can but for a novice its highly NOT reccomended to try---you woul ...

    Invicta Ti-14 spindle
    A message posted at WOODWEB's Solid Wood Machining Forum (8/12/24) -- We have a customer with an Invicta Ti14 shaper and having difficulty removing t ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (8/12) -- came across this RC-33 pictorial tear down and restoration by Ed Hollingsworth ...

    Re: Gemini Gemvar vs MLC Excalibur
    A message posted at WOODWEB's Finishing Forum (8/12) -- It's pretty new, The Satin version is C119624 i believe. "Excalibur Conversion Varnish C ...

    Re: Knives for Hawker Dowel Machine
    A message posted at WOODWEB's Solid Wood Machining Forum (7/12/22) -- I have some of these knives available. You won't have luck anymore from Hawker- ...

    Re: Shop based miter saw length gage
    A message posted at WOODWEB's Solid Wood Machining Forum (7/12) -- The Kreg stops are eh, just ok. They don't hold up to people that like to overtigh ...

    Re: RE: Grit of wood using a Planer
    A message posted at WOODWEB's Solid Wood Machining Forum (7/12) -- Planer finish is calculated in Knife Marks Per Inch. Have a look at the link below ...

    Re: Wire brushing lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (7/12) -- For wire brushing you typically want multiple heads. Similar to sanding. The first ...

    Re: wrench
    A message posted at WOODWEB's Solid Wood Machining Forum (7/12) -- Dom I have posted a link to the Weinig Tooling catalog page of the product you loo ...

    Re: wrench
    A message posted at WOODWEB's Solid Wood Machining Forum (7/12) -- Thanks Russ. I was trying to find a used one. Being kinda cheap lol. I spoke to An ...

    Re: CM 72 manual
    A message posted at WOODWEB's Solid Wood Machining Forum (7/12) -- Kevin, Thank you for the good feedback. I will check out the distributors. I am gl ...

    Re: CM 72 manual
    A message posted at WOODWEB's Solid Wood Machining Forum (7/12) -- The Bini website lists several US distributors under the "worldwide" rub ...

    Re: Bridgewood 708 moulder/planer
    A message posted at WOODWEB's Solid Wood Machining Forum (6/12) -- Yes i am having machine shop make me replacement part.I wish I could have found or ...

    Re: Rejuvinating Molder feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/12) -- Sounds like the kind of tip you'd get on April 1st, "spray some oil on those ...

    Rejuvinating Molder feed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (6/12) -- Has anyone used wd-40 to rejuvenate slipping feed rollers on a delta 4 roll feeder ...

    Re: Telegraphing through HPL
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/12) -- I'm Kyle's boss. The reason we don't use PVA in the press is because we ...

    Re: undermoutsink on SS
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/12) -- Thanks Rob, I'm also doing my first truly dark color, it's chocolate bro ...

    Re: undermoutsink on SS
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/12) -- We almost always just leave 1/2".... every no w and then we will bu ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12/25) -- Infeed fence prior to right head is not parallel with the fixed fence system po ...

    Re: Powermat
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12/25) -- This is quite common on these machines. It happens when the RPM's during start ...

    widebelt sanding maple
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12/23) -- WE have been sanding a lot of soft maple lately. Have been burning pelts. I'm a ...

    sharpening moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12/23) -- Hi all, I'm new to grinding moulder knives (about 5 months). I occasionally get ...

    Re: widebelt sanding maple
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12/23) -- My opinion is that you are using too fine of grit and too slow of feed. Hard ma ...

    Re: wide belt sander trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12/22) -- Some electronic eyes will see through a belt if the eye is too sensitive. Some ...

    Re: grizzly shaper trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12/22) -- Is your outboard fence moved forward for the amount that the cutter is removing ...

    Re: grizzly shaper trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12/22) -- Is the fence flat? If it has a split fence, probably not and the wood is rockin ...

    Re: grizzly shaper trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12/22) -- Ok thank you, ill give that a try ...

    Rank 6 methods of stabilizing moisture level of small kiln dried boards
    A message posted at WOODWEB's Sawing and Drying Forum (5/12) -- Hi everybody, I am looking for good methods of stabilizing moisture level of small ki ...

    Re: Venner or Solid?
    A message posted at WOODWEB's Cabinetmaking Forum (5/12) -- The labour of resawing and pressing uneven "veneers" then edge banding and glui ...

    Re: Venner or Solid?
    A message posted at WOODWEB's Cabinetmaking Forum (5/12) -- Thanks for the reply guys, this is one of the jobs that I'll regret taking, I may steer w ...

    Re: Venner or Solid?
    A message posted at WOODWEB's Cabinetmaking Forum (5/12) -- When i turn down bad jobs i get better jobs ...

    Re: Weinig "CombiHead" or equivalent
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12) -- Dave Here are a couple of drawings of the the profile I was talking about over the ...

    Re: hollow chisel mortising bit
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12) -- Hi Nathan: I still have some old Forest City Mortising series 1-28 chisels and bit ...

    Re: Weinig "CombiHead" or equivalent
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12) -- Dave Glad I could offer a solution without spending more money. One thing I forgot ...

    Re: Weinig "CombiHead" or equivalent
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12) -- Russ, Thanks - I appreciate the info. Pretty much the same concept as the CombiHea ...

    Re: Reset jointer knives, edge is perfect, but face isnt
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12) -- On the attached photo of a new Powermatic model you'll see the outfeed table adjus ...

    Re: Reset jointer knives, edge is perfect, but face isnt
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12) -- You should be able to adjust the outfeed table height just as you adjust the heigh ...

    Re: Reset jointer knives, edge is perfect, but face isnt
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12) -- Check the unjointed side of the board to see if it has a gap on each end of the bo ...

    Bacci mortiser
    A message posted at WOODWEB's Solid Wood Machining Forum (5/12) -- I looking for someone with a Bacci mortiser- older green model circa 1990. I'm in ...

    Re: What does your shop use for crosscutting face frame stock?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/12/23) -- I bought a 90 degree chop saw from CTD about 5 years ago for a similar purpose. ...

    Re: Solid 2012 R1
    A message posted at WOODWEB's CAD Forum (4/12) -- Thank you Dave, I guess I need to click on each wall, even though they do not stay highlighted, and ...

    Re: Solid 2012 R1
    A message posted at WOODWEB's CAD Forum (4/12) -- Ahh,,2012r2 ,,,one of the best versions ,,,when the blind dado package was available for this versi ...

    Re: Closed Louver
    A message posted at WOODWEB's Solid Wood Machining Forum (4/12) -- I think it would be too unstable coming off the end of the moulder machine milling ...

    Closed Louver
    A message posted at WOODWEB's Solid Wood Machining Forum (4/12) -- We have some jobs coming up making interior doors. Most of the have open louvers; ...

    Re: Closed Louver
    A message posted at WOODWEB's Solid Wood Machining Forum (4/12) -- Dustin If you try and mill it that way you suggested you mill away all the wood fr ...

    Re: Closed Louver
    A message posted at WOODWEB's Solid Wood Machining Forum (4/12) -- Why not do it standing upright? Major profiling done with the side heads, that way ...

    Re: Closed Louver
    A message posted at WOODWEB's Solid Wood Machining Forum (4/12) -- Sorry Here are the correct links,m sorry I posted the wrong ones. Maybe the staff ...

    Re: Experienced noob needs molder selection advice
    A message posted at WOODWEB's Solid Wood Machining Forum (4/12) -- I have no idea about the islands, but logs from arborists around me are filled wit ...

    Re: curved edgebander reviews
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/12) -- Thanks for this info Randy. ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (4/12) -- Rob, I don't believe this is Mel's video, but was included by her as illustration ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12/25) -- I think a review of terminology is in order. “Snipe” is usually at the end of t ...

    Re: Weinig Profimat 23 Moulder - Material drifts off fence
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12/25) -- I will bet lunch it is the right fence. Either the reference engraver fence or ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12/25) -- I haven't contacted weinig about it. Im sorry about my explanation. The snipe i ...

    Re: Powermat
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12/25) -- The Weinigs and other moulders I am familiar with all have locks that are loose ...

    Re: Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12/25) -- What are the dimensions of the part where the snipe is? What are the dimensions ...

    Re: Source for prelaminated panels with realistic faux walnut?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/12/23) -- I'd check online with Amazon, Home Depot, or Pro Cabinet Supply. ...

    Re: Martin T17F
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12/22) -- Hi Joe, Thanks for your reply. Your saw looks immaculate by the way! I’m in tou ...

    Re: Multi gang rip saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12/22) -- You need to look at how much material you need to cut and see if it justifies t ...

    Re: Problems with Felder F700Z shaper (2021 model year)
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12/22) -- Dan, I have the same machine and i don't like that aspect of the machine ( slow ...

    Re: Multi gang rip saw
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12/22) -- We had to feed a Weinig running at about 30-35 l/f per minute. That took two me ...

    Re: Door sticking on the moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12/22) -- Before I sold out of a cabinet shop, I had already bought a molder to start mak ...

    Re: Tersa m+ longevity
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12/22) -- I actually run all carbide in these type of heads and you'll get a lot longer l ...

    Bacci oil-pneumatic cylinder rebuild
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12) -- I have attempted to rebuild the cylinders on a 1998 model Bacci MOD. The cylinders ...

    Re: 4 head 226 Mattison moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12) -- I ran a couple molders like those many years ago. As I recall, a 5 lb hammer was a ...

    Re: 4 head 226 Mattison moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12) -- Hi Thanks for the reply - I will purchase the 5 pound hammer if someone that under ...

    Re: Benefits of 3D vs2D
    A message posted at WOODWEB's Business and Management Forum (3/12) -- If that is the case than it seems like reinventing the wheel to try and informa ...

    Re: pigmented cv over raised panel doors
    A message posted at WOODWEB's Finishing Forum (3/12) -- Not sure if they have them in your area, but we get two piece mdf doors here, and even for sh ...

    Re: moulder vs planner
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12) -- In theory, yes. But if the rips you're feeding it are twisted, wavy, or badly bowe ...

    moulder vs planner
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12) -- If we purchase a moulder can we get away with just straight line ripping and runni ...

    Re: Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12) -- Definitely not "as successful" with a single head planer (assuming it's ...

    Small parts on 4-panel doors
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12) -- Looking at some doors for a potential job that are 4-panel cabinet doors with smal ...

    Re: Small parts on 4-panel doors
    A message posted at WOODWEB's Solid Wood Machining Forum (3/12) -- Just make up a sled with some scrap mdf and a couple DeStaco clamps and you can ru ...

    edge sanders
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12/26) -- I'm looking for real info on edge sanders: quality and durability. I bought a R ...

    Re: edge sanders
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12/26) -- I've got an old Oakley oscillating edge sander. It's actually a double sided sa ...

    Re: edge sanders
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12/26) -- look for a used sander like a Oakley The older cast machines run forever I am n ...

    Re: edge sanders
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12/26) -- Thanks for the info! ...

    Re: Conditioner For Wide Belt Conveyer Belt?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12/24) -- Good to know Rich! Does this help with the glaze-over from time, or is it more ...

    Re: Conditioner For Wide Belt Conveyer Belt?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12/24) -- Simple Green works well for me on rubber belt conditioning. ...

    Re: Wood Species?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- I agree with taking the hinge off but also try this. Does the door weigh a ton or ...

    Re: Wood Species?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- Unfortunately I can't get my hands on that door without making a 2 hour trip. Also ...

    resource for basic shaper speed/feed info?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- I'm a cabinetmaker with several years of experience recently ]tasked with running ...

    Re: Corian Sinks
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/12) -- If I did these on any frequency I would be setting up an inside corner c ...

    Re: weinig powermat 1500 cut-stock tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- First question is what are using to prep your blanks? Straight line rip saw or gan ...

    Re: Cabinet Vision MDF door sectioning
    A message posted at WOODWEB's CAD Forum (2/12) -- First, I'd recommend drinking the kool-aid and paying the yearly support fee so you can get onto th ...

    weinig powermat 1500 cut-stock tolerances
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- The company I work for has 2 weinig powermat 1500 moulders and we are concerned ab ...

    Re: Cabinet Vision MDF door sectioning
    A message posted at WOODWEB's CAD Forum (2/12) -- Solid Ultimate 9.0 and S2M standard 6.0 ...

    Re: 72'' or longer straight metal bar
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- An aluminum extrusion would be your best bet. ...

    52" Wide Double Sided Planer
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- Hello All, Does any one have experience in that 52" wide double side planer? ...

    Re: Level infeed bed on Weinig Powermat 500
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- James First thing I would do is tighten the belt on the first bottom spindle, the ...

    Level infeed bed on Weinig Powermat 500
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- Hello all! I have a Weinig Powermat 500 that has an unaligned infeed bed, and am w ...

    Re: Level infeed bed on Weinig Powermat 500
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- Oops, accidentally posted the wrong image! Lol, kids coloring pages :-) ...

    Re: Finishing exterior MDF - Extira
    A message posted at WOODWEB's Finishing Forum (2/12) -- I think a lot of this industry has to do with being able to sell a product with confidence an ...

    Re: Custom built surfacing machine for slabs
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- Thanks - this looks like a great machine for occasional use. We are a lumber compa ...

    Re: Dial indicator
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- I bought an inexpensive one out of the MSC catalog. Don't need anything better sin ...

    Re: Custom built surfacing machine for slabs
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- Just do a google search. Anybody selling router bits will sell you one. Here is on ...

    Re: Custom built surfacing machine for slabs
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- Here is the "machine" we use, on the rare occasions we need to do slab w ...

    Re: Custom built surfacing machine for slabs
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- A better photo ...

    Molder for reclaimed T&G
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- Hello Im considering purchasing an older 5 head molder for the production of recla ...

    Re: shop fox moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- I like the original. Just about a 1500.00 spread and I just don't use mine often e ...

    Re: shop fox moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- Why not buy the original, the WH? You wouldn't be asking these questions. ...

    Re: shop fox moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/12) -- thanks Jim ...

    Re: Quick lock insert moulder head
    A message posted at WOODWEB's Solid Wood Machining Forum (1/12) -- I have 5 of these heads, love them. I have one of these on the last bottom head th ...

    Quick lock insert moulder head
    A message posted at WOODWEB's Solid Wood Machining Forum (1/12) -- Is any one using the quick lock moulder head. Would like to hear some input on thi ...

    Re: Any idea about lift table manufacturer offering good quality hydraulic
    A message posted at WOODWEB's Solid Wood Machining Forum (1/12) -- We purchased (2) 4000# lifts just over a year ago from Fairborne Equipment. The on ...

    Re: Best tool for half laps
    A message posted at WOODWEB's Solid Wood Machining Forum (1/12) -- What lengths are your material and what level of accuracy are you expecting? ...

    Melamine/Blade cutting issues
    A message posted at WOODWEB's Solid Wood Machining Forum (1/12) -- I am having melamine cutting issues on my beam saw. (Homag CH12) The new blade/sco ...

    45º shaper tooling question
    A message posted at WOODWEB's Solid Wood Machining Forum (1/12) -- I am looking for advice about tooling approaches We have a dedicated shaper with p ...

    A more heavy duty sander than a jet 22-44 for small parts production?
    A message posted at WOODWEB's Solid Wood Machining Forum (1/12) -- I've got a few of the jet/Performax 22-44 sanders that get used 6-8 hours a day in ...

    Re: 45º shaper tooling question
    A message posted at WOODWEB's Solid Wood Machining Forum (1/12) -- Your existing tooling is brazed carbide? Insert carbide is typically more durable ...

    3 phase rotary converter for weinig p22 & dust collection
    A message posted at WOODWEB's Solid Wood Machining Forum (1/12) -- need info on sizing & installing 3 phase rpc for weinig p22 5 head moulder &am ...

    Re: 6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (12/11/25) -- Alan, I have had a dull top head give me this showing up on the last bottom fi ...

    Re: 6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (12/11/25) -- You can contact Weinig to attend their classes on molder training. Different m ...

    Re: CNC Starter Tooling? What do we need?
    A message posted at WOODWEB's CNC Forum (12/11/24) -- Harry, A long as you stay very realistic about the learning curve you will be fine. A couple to ...

    Re: Building a gang rip saw up-to 15 blades
    A message posted at WOODWEB's Solid Wood Machining Forum (12/11) -- Paul makes a panel gang rip saw for this very purpose. They have models that will ...

    Re: Machining brass and wood
    A message posted at WOODWEB's Solid Wood Machining Forum (12/11) -- I have used contact adhesive on steel, usually gluing to plywood. I have not had ...

    Re: Machining brass and wood
    A message posted at WOODWEB's Solid Wood Machining Forum (12/11) -- Thanks Geoff, I had put contact adhesive on the "must try" list as well ...

    Re: Machining brass and wood
    A message posted at WOODWEB's Solid Wood Machining Forum (12/11) -- David, It crossed my mind that contact adhesive is temperature sensitive. For exa ...

    Re: Machining brass and wood
    A message posted at WOODWEB's Solid Wood Machining Forum (12/11) -- David, I have not used liquid contact adhesive for a long time so I shouldn't com ...

    How to clean panels prior to lamination
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/11) -- We currently use MDF as a substrate and press our HPL using a vacuum ba ...

    Re: Horizontal Boring Machines
    A message posted at WOODWEB's Solid Wood Machining Forum (12/11) -- Hi Geoff, I saw a demo of the Soukup Versa at LIGNA earlier this year and it is i ...

    Re: Horizontal Boring Machines
    A message posted at WOODWEB's Solid Wood Machining Forum (12/11) -- Joe, Thank you. I have been in touch with Greg. In addition to talking with him I ...

    Commercial Top Laminating
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/11) -- Hello. Thought I'd post this here as well as the cabinetmaking forum. I ...

    Outdoor laminate top substrate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/11) -- What's a good substrate for a laminate table top for outdoor use? Thank ...

    Re: Laminating hpl in plywood without telegraphing
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/11) -- Have you tried plywood with MDF cross bands? That has the plywood core ...

    Re: Miter fold
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/11) -- Thanks for the response. I am trying to develop a technique for miter f ...

    Re: Miter fold
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/11) -- Did you ever hear of a Betterly V groover sold by Penski Edge it does a ...

    Re: Nonflammable Contact Cement
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/11) -- Well, I followed the directions and the advice here, and failed miserab ...

    Re: Thick laminate material
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/11) -- You didn't give us a lot of clues on what the laminate looks like, but ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/11) -- Shaner In reference to the above post "Another could be too many knives in t ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/11) -- What do you mean by blower fan?? The actual dust collector or something else?? Ou ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/11) -- We have had this problem planning pine for flooring. We increased the blower spee ...

    Re: dual hook heads
    A message posted at WOODWEB's Solid Wood Machining Forum (11/11) -- i think you can find his contact info on his you tube videos , also very informat ...

    Re: Knife grinding
    A message posted at WOODWEB's Solid Wood Machining Forum (10/11/23) -- Yes and No. You can grind them in a different hook angle head if you compensat ...

    Re: Which shoe molding use in my kitchen cabinet
    A message posted at WOODWEB's Architectural Woodworking Forum (10/11/22) -- New or not, professional or amateur, what kind of question is that? Plast ...

    wood pole cutt
    A message posted at WOODWEB's Solid Wood Machining Forum (10/11) -- hello all hope your having a good day i am building fences made with electicity p ...

    Re: beveled edge in laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/11) -- I have been to Wilsonart and watched how they make beveled edge using a ...

    Re: beveled edge in laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/11) -- Thanks Bruce. Ya that is like the jig I cooked up. I know there was a v ...

    Re: Manual for Rondamat 925
    A message posted at WOODWEB's Solid Wood Machining Forum (10/11) -- The Rondamat 925 is one of the most difficult grinders to grind moulding knives o ...

    Re: Manual for Rondamat 925
    A message posted at WOODWEB's Solid Wood Machining Forum (10/11) -- thanks I am aware of that, I was hoping someone had a manual they did not need or ...

    Re: Adjustable bevel cutter
    A message posted at WOODWEB's Solid Wood Machining Forum (10/11) -- Amana and Dimar sell the same products under different brand names. ...

    Re: Epoxy Resin - Lab Countertop Suppliers??
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/11) -- You need to get formica brand chemsurf. readily available. ...

    Re: Epoxy Resin - Lab Countertop Suppliers??
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/11) -- Is it comparable to the durability of Epoxy Resin? ...

    Re: V-Groove Cutter on CNC for Solid Surface?
    A message posted at WOODWEB's CNC Forum (9/11) -- I run a vortex integrated v groove on my Anderson CNC . I run a first pass at .4 in and a second pa ...

    Re: V-Groove Cutter on CNC for Solid Surface?
    A message posted at WOODWEB's CNC Forum (9/11) -- When we miterfold SS we hog out the bulk of the material with any tool possible just to save the ti ...

    Re: V-Groove Cutter on CNC for Solid Surface?
    A message posted at WOODWEB's CNC Forum (9/11) -- Here is the bit we carry for the Miter Folding Part # SECS143IR ...

    Re: V-Groove Cutter on CNC for Solid Surface?
    A message posted at WOODWEB's CNC Forum (9/11) -- What Mark said is spot on. ...

    Re: Hitachi cb75F resaw
    A message posted at WOODWEB's Solid Wood Machining Forum (9/11) -- To follow up on my last message, I have ordered the stellite sawblades from Wood-M ...

    Re: Loss of a good man Chuck Rankin
    A message posted at WOODWEB's Solid Wood Machining Forum (9/11) -- I am very sorry to hear this sad news. Chuck was very helpful to us when we bought ...

    Re: Bandsaw Blade width Optimum for resawing door stile skins
    A message posted at WOODWEB's Solid Wood Machining Forum (9/11) -- Do you have a product number or description for these Lenox carbide tipped bandsaw ...

    Re: Straight line rip saw personal safety solutions
    A message posted at WOODWEB's Solid Wood Machining Forum (9/11) -- Justin, If your Cantek has a one piece chain with the blade running in a grove, th ...

    Re: Straight line rip saw personal safety solutions
    A message posted at WOODWEB's Solid Wood Machining Forum (9/11) -- Justin, The rubber inserts are are meant to be glued into that slot. I think you'l ...

    Re: Straight line rip saw personal safety solutions
    A message posted at WOODWEB's Solid Wood Machining Forum (9/11) -- A thick leather apron is along the lines of what we were thinking. would a thick a ...

    Re: Can a bandsaw replace a table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/11) -- I've been working on a similar saw for 5 years now and I 'm testing the latest pro ...

    Re: Rip saws
    A message posted at WOODWEB's Solid Wood Machining Forum (9/11) -- I've been working on an all-purpose 2HP micro-mill veneer resaw for five years now ...

    Re: Groovers o.k. for tenoning?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/11) -- Correy, The Amana sets are cheap. The carbide isn't as hard as the Forrest. The Fo ...

    Re: Wood Glide lubricant
    A message posted at WOODWEB's Solid Wood Machining Forum (9/11) -- Hi Scott: We have been selling the MBL40 liquid table lubricant for nearly 30 year ...

    Re: Box joint machine
    A message posted at WOODWEB's Solid Wood Machining Forum (9/11) -- U.S.concepts haunching machine is interesting but its not the same as on the pictu ...

    Re: Box joint machine
    A message posted at WOODWEB's Solid Wood Machining Forum (9/11) -- You too can go into the beehive business.... ...

    Re: Box joint machine
    A message posted at WOODWEB's Solid Wood Machining Forum (9/11) -- I want one. ...

    FX Ideal Edge Fabricating
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/11) -- Has anyone worked with the Ideal edge bullnose from Formica. Since there ...

    Shaper spindle
    A message posted at WOODWEB's Solid Wood Machining Forum (8/11/23) -- We have an SCM T155 Nova Shaper with a tilting spindle. While removing the head ...

    Re: wood name
    A message posted at WOODWEB's Solid Wood Machining Forum (8/11) -- Tony Alright, I will take an educated guess My guess would be from the mahogany fa ...

    Re: shaoer purchase
    A message posted at WOODWEB's Solid Wood Machining Forum (8/11) -- I have the 10 HP Extrema XT260, it is the tilting version with a sliding table. I ...

    self edge primer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/11) -- What are individuals using to prime the selfedge with before application ...

    Re: self edge primer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/11) -- We are using Dorus ND 183/1. Works great! ...

    Re: gluing turning blocks for pillar bases
    A message posted at WOODWEB's Architectural Woodworking Forum (8/11) -- I'm about 150 miles from the Ohio river, and the use of Pine is probably a re ...

    Re: Three phase question
    A message posted at WOODWEB's Solid Wood Machining Forum (7/11/23) -- Not really answering your question. I have a 100 amp panel in my shop. I run 2 ...

    Shop based miter saw length gage
    A message posted at WOODWEB's Solid Wood Machining Forum (7/11) -- Does anyone make a miter saw stop any more? We have a bunch of Biesmeyer stops tha ...

    Re: RE: Vacuum Systems
    A message posted at WOODWEB's Solid Wood Machining Forum (7/11) -- Are you saying you have no dust collection in your shop? First thought, how did yo ...

    Re: RE: Grit of wood using a Planer
    A message posted at WOODWEB's Solid Wood Machining Forum (7/11) -- Are we possibly talking about an abrasive planer? ...

    Wanted contact drum for Ramco sander
    A message posted at WOODWEB's Solid Wood Machining Forum (7/11) -- I am looking for a rear contact drum for a Ramco DW-900Rp wide belt sander. The ne ...

    Re: End matching and crosscutting flooring from molder
    A message posted at WOODWEB's Solid Wood Machining Forum (7/11) -- Look at the PMK machine. I know several that use this USA made machine ...

    CM 72 manual
    A message posted at WOODWEB's Solid Wood Machining Forum (7/11) -- I recently purchased a used CM 72 slot mortiser. I bought it from the original own ...

    Re: strip easy forms
    A message posted at WOODWEB's Solid Wood Machining Forum (7/11) -- You can get close to those dimensions with a Festool Domino. A 6mm bit at the wide ...

    Re: Weinig Molder
    A message posted at WOODWEB's Solid Wood Machining Forum (7/11) -- I doubt you will find anyone other than Weinig, since their motors are often in ca ...

    Choosing panel material for counter doors
    A message posted at WOODWEB's Furniture Making Forum (6/11/23) -- Hi, I am looking for some advice . The project is a millwork counter for a commerci ...

    Re: Variomatic power feed
    A message posted at WOODWEB's Solid Wood Machining Forum (6/11) -- If it were cheap enough I'd buy it and re-build the machine. This machine fell out ...

    Re: cabinet vision
    A message posted at WOODWEB's CAD Forum (6/11) -- From the CV opening screen. Run the Backup Utility that is under the Utility drop down. Then transf ...

    Re: cabinet vision
    A message posted at WOODWEB's CAD Forum (6/11) -- The backup file you need will be found under C;Planit/Solid11/Automatic Backups. The attached png s ...

    Re: Carbide knives chipping while grinding.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/11) -- Dr David is correct. To add to that, I would check to see if the carbide was braze ...

    Re: 50’s 16” Yates American jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11/25) -- Here is how I set up a joiner: a 1" x 2" x 12" S4S straight hard ...

    Three phase question
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11/23) -- Figured I would ask this question here instead of killing time going through ba ...

    Re: Three phase question
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11/23) -- It would probably start the shaper as its not heavy load to start. But no if yo ...

    grizzly shaper trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11/22) -- I have a grizzly 1026 3 hp shaper. For some reason when i run my rails for cabi ...

    Re: grizzly shaper trouble
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11/22) -- You maybe feeding to fast. O not enough pressure on the feeder. ...

    how to adjust a manual thickness gauge on a Sandya 1k
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- my gauge is off by a few thousands from dressing my feed belt. How can I adjust it ...

    Grizzly 18-36 Drum SDander
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- I have a 18x36 Grizzly drum sander and it is leaving peaks and valleys in the wood ...

    Re: Butfering Planer/Sander Eating Belts
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- We have a Butfering, not that model though. There is either an electric eye or rub ...

    Butfering Planer/Sander Eating Belts
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- Hello, Hoping someone has experience with the Butfering SG0 211 MK with a planer h ...

    Re: Butfering Planer/Sander Eating Belts
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- Wurth belts are what we use. I have tried several, they get eaten within a few pow ...

    Re: Butfering Planer/Sander Eating Belts
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- I question the new belt. What brand are you using? ...

    Weinig "CombiHead" or equivalent
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- We've been doing more items with a beaded edge, some with a bead on both edges. On ...

    hollow chisel mortising bit
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- I am looking for either a 5/8" or 3/4" shank hollow chisel mortising bit ...

    Re: Reset jointer knives, edge is perfect, but face isnt
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- Where are you jointing the board edge? My suspicion is that it is at the back or f ...

    Re: Cumaru stairs
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- Don't you think that expecting (and guaranteeing) exposed exterior wood to never c ...

    Re: Reset jointer knives, edge is perfect, but face isnt
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- Mike, The outfeed table will not twist when raising and lowering unless there is s ...

    Re: Reset jointer knives, edge is perfect, but face isnt
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- Bh, thank you so much! I have a powermatic 54a 6" long bed jointer. Ive had t ...

    Re: Reset jointer knives, edge is perfect, but face isnt
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- I'm putting my money on your technique is causing the problem. The board is more l ...

    Re: Reset jointer knives, edge is perfect, but face isnt
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- Yes......nice setting gauges. I have similar items. The problem with fixtures like ...

    Re: Reset jointer knives, edge is perfect, but face isnt
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- These are the dial indicators i bought but ive been struggling to find a good yout ...

    Re: Reset jointer knives, edge is perfect, but face isnt
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- http://www.amazon.com/CMT792-Magnetic-Knife-Setting-Jigs/dp/B000P4HO3M ...

    Re: Reset jointer knives, edge is perfect, but face isnt
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- Are these the two things i need to adjust to move my outfeed table? ...

    Re: Laminate edge
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/11) -- http://www.betterleytools.com/page_9.htm ...only other method I've seen ...

    Baileigh ss-2421
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- I currently build my shaker doors and the sliding table saw with a dado blade. I a ...

    Re: Baileigh ss-2421
    A message posted at WOODWEB's Solid Wood Machining Forum (5/11) -- a very light machine for production work. at least use the 3/4" spindle not 1 ...

    Trying to learn how to do colored laminations for my business
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/11) -- Hey guys, I'd like to start making my own colored laminations out of bal ...

    Ekstrom Carlson 112-A sander
    A message posted at WOODWEB's Solid Wood Machining Forum (4/11/25) -- I have an Ekstrom Carlson 112-A edge sander. I love it but it's developed an in ...

    Re: Gluepot cleaning / repair
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/11/25) -- Yes, we used them years ago, and I would again. Came back like new. ...

    Re: Titebond Cold Press
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/11/24) -- Yes, you should apply it to both surfaces for optimal adhesion and st ...

    Re: Moulding line
    A message posted at WOODWEB's Solid Wood Machining Forum (4/11/24) -- What avenues have you considered for selling your entire moulding operation, in ...

    Re: Ironwood planer reviews
    A message posted at WOODWEB's Solid Wood Machining Forum (4/11/22) -- From my own inquiries into Ironwood widebelts, sold by Stiles in my area, they ...

    Re: Scallop depth
    A message posted at WOODWEB's Solid Wood Machining Forum (4/11) -- Depth of a cuttermark gullett in inches distance between 2 cuttermarks in inches s ...

    Re: Solid 2012 R1
    A message posted at WOODWEB's CAD Forum (4/11) -- Select the end of the wall you want to resize before typing your new size If you want to move sever ...

    Re: Maple matchbook butcher block issues
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/11) -- Jeff M - My point exactly. There are a lot of pissed off people out ther ...

    Re: Maple matchbook butcher block issues
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/11) -- Just to comment further, I've seen many, many end grain cutting boards a ...

    Re: curved edgebander reviews
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/11) -- I ended up purchasing the Festool Conturo. The diameter of the pressure ...

    Re: curved edgebander reviews
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/11) -- Does anyone know if the Contura can handle a tight inside radius of 15mm ...

    Re: Maple matchbook butcher block issues
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/11) -- No doubt this is very bad construction technique, but it also looks like ...

    Re: Bandsaw power feed
    A message posted at WOODWEB's Solid Wood Machining Forum (4/11) -- have been looking into this matter and my finding are: - you may need a larger tha ...

    Re: profile grinder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11/26) -- Can anyone tell me where you can still get the Grinding wheels for the veil ...

    Weird Snipe
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11/25) -- We are running a powermat 500 and I keep getting a snipe about 2 to 3 inches in ...

    Re: Spindle running hot new bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11/23) -- I had a look at RZ bearings and the seals are non contact on the inner race so ...

    Re: Spindle running hot new bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11/23) -- On my Martin four sider planer moulder they instruct along the same lines Fred ...

    Re: Martin T17F
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11/22) -- The nut and flange are easy. Martin can still supply those.The nut has a should ...

    Re: Benefits of 3D vs2D
    A message posted at WOODWEB's Business and Management Forum (3/11) -- It takes more time than 2d drawings. Which is why I said, I would not use it fo ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11) -- You will find some good discussion of glue failure in the archives and Knowledge B ...

    Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11) -- Hello everyone, I'm currently having problems with glue failure on my glued up sta ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11) -- Thank you everone. Sounds like a good SLR saw will be the answer . I already was l ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11) -- David is right. I would suspect knives first. Widebelt could be problematic depend ...

    Re: Moulder blanks for glue ups
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11) -- Jason, The best edge prep for an edge glued panel is a ripped edge coming off of a ...

    Re: Tigerstop Keypad
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11) -- Nope. What is failing on yours? ...

    Re: Wood grinder chip sizes
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11) -- We have greatly improved the situation by turning the teeth to fresh edges, and ad ...

    Re: Drill bit replacement
    A message posted at WOODWEB's CNC Forum (3/11) -- Using some fancy math we use 10,000 dowels a month. So we drill 10,000 vertical holes a month. We h ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11) -- The shop where I worked used to make a table with quarter-round legs with a 3" ...

    Re: Spring clamps
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/11) -- I am was talking about the hot glue gun to glue the alignment blocks to ...

    Re: Spring clamps
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/11) -- Will the 2" be large enough for 1.5" build up? Also I only hav ...

    Re: Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/11) -- Thanks everyone for sharing. David, do you think your method would work as success ...

    Re: broken bandsaw blades
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11/25) -- Thanks for all the input. One thing not mentioned is whether relieving the tens ...

    Re: Purchasing a Scmi Sandya win cs 63
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11/22) -- Thanks for the info BH, I was thinking that I would need to start with 80 but I ...

    Re: Insert Planer Knives to Solve Tearout Woes
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11/22) -- Maybe you can try the cutter head of the automatic tool changer. ...

    Re: Wood Species?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- I would, if I was in that city. I originally thought it was maple but now I'm seco ...

    Re: Wood Species?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- it's a little hard to tell with that dark stain. Take a hinge off and look in the ...

    Wood Species?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- Can't tell if this door is alder or maple. Need to match for customer. ...

    Re: Help with Martin T71 Slider (1987)
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- i have the manuals for mine if you need. ...

    Corian Sinks
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/11) -- Hello, I am having a problem with a product I make infrequently, and eve ...

    Re: Corian Sinks
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/11) -- Need to shape a blank - several and glue paper on them. Lots. Coving san ...

    Re: Adjusting a sliding table saw bed
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- You have my condolences. I had a Minimax combo with the sliding carriage you descr ...

    Vintage Machinery
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- I have a vintage year 1933 30" Yates American B5 Planer and a 1940's Smithway ...

    Re: profile grinder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- Should try and find someone close to you that has one, unless you're in Colorado t ...

    Re: profile grinder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- want to sell it? the down time sending out hurts,especially in middle of run. also ...

    Re: Custom built surfacing machine for slabs
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- Thanks. Is there a particular commercial CNC router head that anyone would recomme ...

    Dial indicator
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- I need to replace the blades on my powermatic jointer and planer. Whos dial indica ...

    Re: SOLID WORKS DRAWING
    A message posted at WOODWEB's CAD Forum (2/11) -- I'm not in LA but I might be able to help you. We're very proficient in Solidworks at my shop in li ...

    Re: shop fox moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- I've had one around 5 years or so. Good for radius and small runs. Production runs ...

    Re: chipping aeon laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/11) -- I talked with tooling guy he said to get a variable speed router, run it ...

    shop fox moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- Is anyone using the new shopfox molder similar to the Williams hussy in a small sh ...

    Re: shop fox moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/11) -- Does the shop fox produce clean molding without knife marks. Do the rollers hold u ...

    Re: Table saw vs. Straight line rip saw
    A message posted at WOODWEB's Solid Wood Machining Forum (1/11) -- Before we had an SLR my partner and I would have contests at the jointer/table saw ...

    Re: swing-chisel mortiser
    A message posted at WOODWEB's Solid Wood Machining Forum (1/11) -- What is "the right price"? ...

    Re: 12" Jointer/Taiwan
    A message posted at WOODWEB's Solid Wood Machining Forum (1/11) -- We recently restored an old 12" Northfield jointer from the 1930's with it's ...

    Re: AutoCAD 3D
    A message posted at WOODWEB's CAD Forum (1/11) -- I agree with Dan. I have used Solidworks which are not "dumb solids". Admittedly I have n ...

    Re: Hook angle for hardwoods - Weinig 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (1/11) -- Scott Very helpful chart Chuck posted, I have attached link to the Weinig tooling ...

    Re: Hook angle for hardwoods - Weinig 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (1/11) -- Hi Scott: Here is a link with a chart with generally recommended hook angles for a ...

    Re: Sketch Up cabinet construction machining software
    A message posted at WOODWEB's CAD Forum (1/11) -- You should really look at the Inventor/Router Cim package, or the Solid Works/Router Cim Package. B ...

    Re: Stroke Sander: Good for finish sanding?
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10/25) -- Stroke sander is great for leveling and processing large surfaces, but it's no ...

    Re: Bench grinder bristle wheels for wood (not steel)
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10/24) -- Look at the Star Sanders from Rockler on the search result. They are individua ...

    Re: Bench grinder bristle wheels for wood (not steel)
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10/24) -- Thanks BH I checked out that product and it looks like the sanding stars would ...

    Re: Bench grinder bristle wheels for wood (not steel)
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10/24) -- You're looking for flap wheels for wood, they're strands of abrasive, differen ...

    Re: Air Compressor Troubleshooting
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10/22) -- Probably not as often as I should...but I don't see how that could produce my ...

    Re: Air Compressor Troubleshooting
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10/22) -- If the tank is half full of water, you have very little capacity. ...

    Re: Air Compressor Troubleshooting
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10/22) -- Do you regularly drain condensation from the compressor tank? ...

    Re: Rip fence modification
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10) -- I put a Biesmeyer on a Felder at my last job. Can't take pics, I'm retired now. ...

    Re: broken bandsaw blades
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10) -- x2 on AM's suggestion for the Lennox Woodmaster B blade. You can get them from CT ...

    Re: Machining brass and wood
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10) -- David, I have done several projects gluing copper, stainless steel and galvanized ...

    Re: Machining brass and wood
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10) -- Geoff, CA is cyanoacrylate (super glue) ...

    Re: Flooring with Circle Saw Milling Marks
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10) -- I saw this done once: The original flooring pieces were double thickness. This bl ...

    Horizontal Boring Machines
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10) -- I am in the market for a new horizontal boring machine and would like to know wha ...

    Re: crack repair
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/10) -- SS isn't designed to "clamp to fit" it needs to be machined t ...

    Re: dado cutting tapers
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10) -- Can you run the dados on the radial arm saw? Make two separate jigs for cutting t ...

    Re: dado cutting tapers
    A message posted at WOODWEB's Solid Wood Machining Forum (12/10) -- ...and next time, try doing your machining before you make the tricky shapes. ...

    avonite
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/10) -- Looking for some avonite cairo f1-9130 fall anybody got some to sell? ...

    Re: Gearbox lube for widebelt
    A message posted at WOODWEB's Solid Wood Machining Forum (11/10/23) -- We just did this with our 30 year old timesaver. I used 90 weight gear oil. I ...

    Re: Gearbox lube for widebelt
    A message posted at WOODWEB's Solid Wood Machining Forum (11/10/23) -- Thanks for reminding me about power feeders, I haven't ever changed the oil in ...

    Re: Gearbox lube for widebelt
    A message posted at WOODWEB's Solid Wood Machining Forum (11/10/23) -- 90w gear oil in the power feeders. BH Davis ...

    Passage door astragal
    A message posted at WOODWEB's Solid Wood Machining Forum (11/10) -- I was asked to make T astragal for some exterior doors. Clear pine and red oak, o ...

    Re: Miter fold
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/10) -- Never done it, but if you have the patience I dont see why it would not ...

    Re: Feed roller settings
    A message posted at WOODWEB's Solid Wood Machining Forum (11/10) -- Thanks. I think I got it pretty well set up. Beds were off a bit left to right in ...

    Re: Feed roller settings
    A message posted at WOODWEB's Solid Wood Machining Forum (11/10) -- Ouch! That's more than I paid for my planer! I would think the roller could be re ...

    Re: SCMI S63 planer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/10) -- Thanks for the responses. I did get the planer up and running. I also went to the ...

    Re: BANDSAW BLADES
    A message posted at WOODWEB's Solid Wood Machining Forum (11/10) -- Look for a bimetal blade. That will have a carbon steel base with a second, harde ...

    Re: BANDSAW BLADES
    A message posted at WOODWEB's Solid Wood Machining Forum (11/10) -- Thanks BH. The company I am using now is Morse. Would Lenox be any better? I will ...

    Re: SCMI S63 planer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/10) -- for manual go to https://www.partspronto.com. Manuals/ Standard/ S63 hope this he ...

    Re: Feed roller settings
    A message posted at WOODWEB's Solid Wood Machining Forum (11/10) -- Just checked, a replacement sectional feed roller assembly from scm, $2,863. ...

    Re: What is "normal" tooling style for Weinig molders
    A message posted at WOODWEB's Solid Wood Machining Forum (11/10) -- I went through the same thing your going through about seven years ago. I have a ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/10) -- Hi Shaner: I think what you are referring to is Hammer Marks. These are the resul ...

    Re: What is "normal" tooling style for Weinig molders
    A message posted at WOODWEB's Solid Wood Machining Forum (11/10) -- Hi Scott, Congratulations on your purchase of your Weinig Moulder. Weinig can sup ...

    Re: Wilsonart "traceless" silver velvet and edge bander?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/10/23) -- I just recently completed a job using that velvet texture from wilso ...

    Knife grinding
    A message posted at WOODWEB's Solid Wood Machining Forum (10/10/23) -- Do knives need to be ground in a head that is the same hook angle as what will ...

    Re: Powermatic RB37 Sander parts/repair
    A message posted at WOODWEB's Solid Wood Machining Forum (10/10/21) -- Automationdirect.com will probably have the parts. Pull out the bad one one an ...

    Re: Grizzly 24" Drum sander
    A message posted at WOODWEB's Solid Wood Machining Forum (10/10) -- I have a grizzly 24" dual drum sander and it makes a very high pitched squea ...

    Re: Home built gang ripsaw plans?
    A message posted at WOODWEB's Solid Wood Machining Forum (10/10) -- Another option is to use a spindle shaper and power feeder: stack 7/16" spac ...

    Using our Morbidelli to machine Corian
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/10) -- We have been doing it for some time now. Is it overly hard on the machi ...

    Re: beveled edge in laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/10) -- Here is something on a small scale. ...

    Re: Manual for Rondamat 925
    A message posted at WOODWEB's Solid Wood Machining Forum (10/10) -- You can get one directly from Weinig if you don't mind paying for it.. 704 799 01 ...

    Re: Band Saw Guide Bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (10/10) -- carter guides - only also search woodweb for video of adjustment, this guy is gre ...

    Re: RE: Wide Belt Sandpaper
    A message posted at WOODWEB's Solid Wood Machining Forum (10/10) -- I use these folks. Good quality and fast service. BH Davis ...

    Epoxy Resin - Lab Countertop Suppliers??
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/10) -- Hello, We're looking for a reasonably priced Epoxy Resin Countertop Sup ...

    Re: Jointer Setup
    A message posted at WOODWEB's Solid Wood Machining Forum (9/10/21) -- Look at this like link this should help ...

    Re: V-Groove Cutter on CNC for Solid Surface?
    A message posted at WOODWEB's CNC Forum (9/10) -- Bob, thanks for the info. Curious if you tried single pass or went straight to three passes? My gue ...

    Re: V-Groove Cutter on CNC for Solid Surface?
    A message posted at WOODWEB's CNC Forum (9/10) -- We use 9000mm/min @ 16000 (same bit) in 3 passes. ...

    Re: Corian Counters
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/10) -- I did not do that on a coffee shop cart and should have. Went back and l ...

    Corian Counters
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/10) -- Has anyone put a groove under a counter to prevent the water from wickin ...

    Re: wide belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (9/10) -- Jeff, I am the abrasives specialist for Surfprep sanding and I calibrate wide belt ...

    Re: Widebelt thickness
    A message posted at WOODWEB's Solid Wood Machining Forum (9/10) -- I think many can do it. The only one I've seen myself was a Timesaver. ...

    Conference table construction questions
    A message posted at WOODWEB's Furniture Making Forum (9/10) -- Hi All, I have a commission for a 4'x14' conference table. It will have 3 pedestals fo ...

    Re: Straight line rip saw personal safety solutions
    A message posted at WOODWEB's Solid Wood Machining Forum (9/10) -- I have seen a heavy leather apron of sorts worn by people infeeding a ripsaw. This ...

    Re: adhesive of sanding conveyor belt
    A message posted at WOODWEB's Solid Wood Machining Forum (9/10) -- I have had good luck repairing some sander conveyor belts with Hardman Urethane ad ...

    Wood Glide lubricant
    A message posted at WOODWEB's Solid Wood Machining Forum (9/10) -- We have been using Wood Glide from Par Enterprises for many years. Some of it is a ...

    Re: Groovers o.k. for tenoning?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/10) -- thanks for that Adam. Makes you wonder why more people do not go that route. Thank ...

    Box joint machine
    A message posted at WOODWEB's Solid Wood Machining Forum (9/10) -- Whats the brand of this machine ,where i can get one and how much ...

    Re: Box joint machine
    A message posted at WOODWEB's Solid Wood Machining Forum (9/10) -- It is a haunching machine. Try US Concepts Inc. ...

    Re: Bacci mortiser
    A message posted at WOODWEB's Solid Wood Machining Forum (9/10) -- Do you need one for an MOA/ MOD? ...

    Re: Should I add a brush sander to the back of my wide belt sander?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/10) -- We have a Butfering widebelt. Two head, Drum, combination head. For finish we use ...

    M3 repairs
    A message posted at WOODWEB's Solid Wood Machining Forum (8/10) -- We have a SCM M3 gang rip. Original owner '92 model. We cut mainly 3/4-6/4 softwoo ...

    Re: Should I add a brush sander to the back of my wide belt sander?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/10) -- Another vote for stroke sanders. I would love to have a feed through sander that p ...

    Re: Should I add a brush sander to the back of my wide belt sander?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/10) -- Without some type of oscillating head or finish sander beyond even going to 220 (w ...

    wood name
    A message posted at WOODWEB's Solid Wood Machining Forum (8/10) -- hello hope your having a great day can anyone identify this wood ? thank you in ad ...

    Original Makita 2012NB Blade
    A message posted at WOODWEB's Solid Wood Machining Forum (8/10) -- Dear experts, I just receive my new Makita 2012NB, and extra blade. I manage to ta ...

    Pricing methods revealed
    A message posted at WOODWEB's Cabinetmaking Forum (8/10) -- I have 2 cabinet maker friends that revealed some insight into their pricing methods....q ...

    Re: Freeborn Lock Miter in MDF
    A message posted at WOODWEB's Cabinetmaking Forum (7/10) -- I honestly dont see any issue with the cutter your using. We lock mitered 16' faux poplar ...

    Re: RE: Grit of wood using a Planer
    A message posted at WOODWEB's Solid Wood Machining Forum (7/10) -- Grit is from a sanding machine. KCPI (knife cuts per inch) is from a planer. The t ...

    RE: Vacuum Systems
    A message posted at WOODWEB's Solid Wood Machining Forum (7/10) -- Planning and jointing machines are throwing off large amounts of chips, what vacuu ...

    Re: RE: Grit of wood using a Planer
    A message posted at WOODWEB's Solid Wood Machining Forum (7/10) -- Hi Tommy, I guess you can count knife marks per inch? ...

    Re: Please Help Profimat 22N
    A message posted at WOODWEB's Solid Wood Machining Forum (7/10) -- Rick - Please reach out to Weinig with your Serial # underneath the infeed or Elec ...

    Re: Making Rounded Coffin Top
    A message posted at WOODWEB's Solid Wood Machining Forum (7/10) -- I think you should consider finding someone with a molder who could mill your part ...

    Re: End matching and crosscutting flooring from molder
    A message posted at WOODWEB's Solid Wood Machining Forum (7/10) -- i have a fruilmac random e endmatcher,love it. we run 6-8,000 sq per day like cloc ...

    substrates
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/10) -- can you laminate onto plastic, if so what type? ...

    Re: Veneering Solid Wood
    A message posted at WOODWEB's Veneer Forum (6/10/23) -- Tom, Humidity fluctuates between 65% and 90%. And about 86 degrees all year round. So yes pre ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (6/10) -- As always do as you feel is best. Be reminded that the four posts are held in by p ...

    Square mortising with cordless drill?
    A message posted at WOODWEB's Solid Wood Machining Forum (6/10) -- Has anyone successfully used a cordless drill (I have Makita 18V) and a portable b ...

    Re: What CNC Nesting Software is everyone running?
    A message posted at WOODWEB's CAD Forum (6/10) -- We've officially abandoned MV in favor of Top Solids. An expensive switch but needed. ...

    Re: Carbide knives chipping while grinding.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/10) -- Something else to consider is the age of the carbide and how you may have cleaned ...

    Re: stained wood edge laminate counter
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/10) -- I'm with Bruce on a countertop application... however, if you're doing f ...

    Re: Thin Laminate Rolls
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/10) -- If its not a high wear surface you can look at using a acrylic composite ...

    Re: Nevamar laminates
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/10) -- Its "bitter-sweet" due to their proprietary ARP surface. You'r ...

    Re: drilling cast iron shaper tables
    A message posted at WOODWEB's Solid Wood Machining Forum (5/10) -- Do the two feeders have different bolt patterns and you are worried about too many ...

    Re: Identify wood species
    A message posted at WOODWEB's WOODnetWORK Forum (5/10) -- Apparently not. Clues will help. Where is this piece of wood? Plywood or Solid? Size of wha ...

    Re: Wide-belt sanders for small pieces?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/10) -- http://www.rjrstudios.com/store/p3/SAND-FLEE%C2%AE_18%22_Portable_Drum_Sander.html ...

    Re: Wide-belt sanders for small pieces?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/10) -- Thanks for the help everyone- Adam send you a PM ...

    Reset jointer knives, edge is perfect, but face isnt
    A message posted at WOODWEB's Solid Wood Machining Forum (5/10) -- I reset my jointer knives after I had them sharpened and here's my issue... I boug ...

    Re: Laminate edge
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/10) -- Track saw bevels,thousght it would come out cleaner than the unisaw, don ...

    Re: Plastic bottom bags for DC
    A message posted at WOODWEB's Solid Wood Machining Forum (5/10) -- Hello, sorry the first post was a little vague. Thanks for the response all the sa ...

    Re: Tersa head maintenance ?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/10/22) -- I worked with a SCMI planer that had a Tersa head, had the same issue. I would ...

    Direct Drive VS. Belt
    A message posted at WOODWEB's Solid Wood Machining Forum (4/10) -- A simple question: Which gives you more torque ? Direct drive or belt drive ? I wa ...

    Dimples/Pimples
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/10) -- We are laying up over 1000 sheets/day of laminate. Mostly onto particle ...

    Re: Black Laminate- Best Way To Clean
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/10) -- Our company installs 200+ black melamine garage cabinet sets a year. The ...

    Re: Maple matchbook butcher block issues
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/10) -- The concern is, of course, that this failed construction, and lack of un ...

    Re: Maple matchbook butcher block issues
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/10) -- Thank you for confirming what I already knew, this block was built by a ...

    Re: Maple matchbook butcher block issues
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/10) -- Your posts are quite contradictory. Your first post stated that you are ...

    Re: Filing edges on laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/10) -- You do realize the file only cuts in one direction? The key is to do as ...

    Re: Maple matchbook butcher block issues
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/10) -- No cover up, I addressed it that way for a very particular reason. ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (4/10) -- Mel, if that is your real name…. Regarding your original post: Prior to watching y ...

    Re: Another safety/jig/sketchy cut question
    A message posted at WOODWEB's Solid Wood Machining Forum (4/10) -- I think it's times to order destacos. Then I'll hit the drawing board again. Thank ...

    Re: physics, table saws, and flying lumber
    A message posted at WOODWEB's Solid Wood Machining Forum (4/10) -- Just saw this article in todays paper ...

    Best blade design to prevent "pull" on radial arm saws
    A message posted at WOODWEB's Solid Wood Machining Forum (4/10) -- Looking for insight/opinions into the best blade to use on a radial saw that will ...

    Re: Best blade design to prevent "pull" on radial arm saws
    A message posted at WOODWEB's Solid Wood Machining Forum (4/10) -- We don't know what you are using now but, if you aren't using a blade with a negat ...

    Re: Best blade design to prevent "pull" on radial arm saws
    A message posted at WOODWEB's Solid Wood Machining Forum (4/10) -- Everlast saw makes a radial arm saw blade with a negative hook that works great. D ...

    Re: Source for prelaminated panels with realistic faux walnut?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/10/23) -- Daniel, I went to the local rep, saw the egger sample book and I wasn ...

    Re: Source for prelaminated panels with realistic faux walnut?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/10/23) -- Ok well I thought it might be worth a shot. Thought maybe their carin ...

    Martin T17F
    A message posted at WOODWEB's Solid Wood Machining Forum (3/10/22) -- I have a Martin T17 in need of an arbor nut (and possibly flange) and riving kn ...

    Re: Autocad and cabinet making
    A message posted at WOODWEB's CAD Forum (3/10) -- AutoCAD and Microvellum. Develop your project in AutoCAD 3D and then use Microvellum Solid Model An ...

    Re: Laptop
    A message posted at WOODWEB's Business and Management Forum (3/10) -- Stick withe the gamers [there parts are designed to run 24/7 ] I bought the par ...

    Re: 4 head 226 Mattison moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/10) -- You can also try posting this on the OWWM forum. Lot of people there knowledgeable ...

    Re: Sunhill shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/10) -- Sean, remember Delta changed the spindle tapers on their HDs sometime in the '80s, ...

    Re: Sunhill shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/10) -- Ken, I have both shapers you mentioned already checked spindles on most machines I ...

    Machining Baseball Billets
    A message posted at WOODWEB's Solid Wood Machining Forum (3/10) -- I have dry 12/4 maple and i want to machine it into a 2.75" round billet. Any ...

    Re: undermount sink to laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/10) -- We've installed a lot of Karran sinks in laminate tops with particle boa ...

    Re: Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/10) -- We never run rough lumber through our moulders, even with "face jointing" ...

    Re: Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/10) -- It really depends upon what you are using for a moulder. If it is a full blown mul ...

    Re: Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/10) -- Why are you doing it? If it helps you select color, grain, defects, etc that affec ...

    Re: Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/10) -- KJ, You're going to get better results ripping with lumber that has been surfaced ...

    Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/10) -- Hello everyone, Is it a wasted step to run rough lumber through a planer on both s ...

    Re: Wasted step?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/10) -- Im sorry I should have been more specific. It is a six head moulder with bottom fa ...

    Spring clamps
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/10) -- What size clamps to buy and best place to buy them in volume? ...

    Re: Blown U joints in molder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/10/26) -- Look up a local drive shaft repair facility. My dad did paint and bodywork. At ...

    Re: Blown U joints in molder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/10/26) -- Find a good bearing distributor. If they can't help you they can suggest someon ...

    Re: Longest Lasting Exterior Crucifix Hardwood
    A message posted at WOODWEB's Furniture Making Forum (2/10/22) -- Nate Cougill, the customer would only want wood because the Son of God Jesus Christ ...

    Re: Purchasing a Scmi Sandya win cs 63
    A message posted at WOODWEB's Solid Wood Machining Forum (2/10/22) -- Mark, I would think that 120 and then 150 would be adequate for your resaw stri ...

    Re: Purchasing a Scmi Sandya win cs 63
    A message posted at WOODWEB's Solid Wood Machining Forum (2/10/22) -- The planing process of the gantry planer is the process of relative movement be ...

    Re: Help with Martin T71 Slider (1987)
    A message posted at WOODWEB's Solid Wood Machining Forum (2/10) -- I have the same saw. Been a real workhorse for me. On the rip fence there are 2 al ...

    Re: Help with Martin T71 Slider (1987)
    A message posted at WOODWEB's Solid Wood Machining Forum (2/10) -- Thanks both Joe and Chris! Both very helpful. Chris, I will definitely PM you if a ...

    Re: 72'' or longer straight metal bar
    A message posted at WOODWEB's Solid Wood Machining Forum (2/10) -- https://www.google.com/search?client safari&rls en&q 10+foot+magnesium+str ...

    Re: Moulder Operator/Grinderman pay rates across the country?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/10) -- James That’s the one-million-dollar question with no definitive answer. I will try ...

    Re: profile grinder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/10) -- I have had a Veil for 15 years or so. Good little machine but I now outsource all ...

    profile grinder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/10) -- i have my knives outsourced but would like to be able to sharpen in house. has any ...

    Re: Pulling hair out over 3 phase
    A message posted at WOODWEB's Solid Wood Machining Forum (2/10) -- The easiest way for me to understand this stuff is by drawing vectors. If you use ...

    Saw Arbor Bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (2/10) -- Any of you ever had to replace the Arbor Bearings on an F45 Altendorf. Any Tricks ...

    Re: Custom built surfacing machine for slabs
    A message posted at WOODWEB's Solid Wood Machining Forum (2/10) -- cnc router spoilboard cutters will work great for this. ...

    Re: Laminating veneer with non-UF
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/10) -- We made the change from UF to PVA about five years ago and have had a po ...

    scm 20" planer outfeed
    A message posted at WOODWEB's Solid Wood Machining Forum (1/10/24) -- I'm looking to have the outfeed roller recovered on a 2004 scm s520e. It looks ...

    Re: Steff Feeder
    A message posted at WOODWEB's Solid Wood Machining Forum (1/10/22) -- Should be all handles. Unless somebody broke something and replaced it with a b ...

    Re: Table saw vs. Straight line rip saw
    A message posted at WOODWEB's Solid Wood Machining Forum (1/10) -- For what its worth we buy our lumber straight lined and surfaced We use three size ...

    Re: Table saw vs. Straight line rip saw
    A message posted at WOODWEB's Solid Wood Machining Forum (1/10) -- using an slr is night-and-day different than ripping on a cabinet saw (and even on ...

    Any idea about lift table manufacturer offering good quality hydraulic lift
    A message posted at WOODWEB's Solid Wood Machining Forum (1/10) -- Hi all, I'm running a company in furniture manufacturing industry. For raising hea ...

    Re: Any idea about lift table manufacturer offering good quality hydraulic
    A message posted at WOODWEB's Solid Wood Machining Forum (1/10) -- In my experience an important thing to be aware of is the fact that there are only ...

    AutoCAD 3D
    A message posted at WOODWEB's CAD Forum (1/10) -- I have a team of individuals using AutoCAD 2D, no one of uses or knows how to use the 3D portion of ...

    A Suggestion For The Woodweb
    A message posted at WOODWEB's Solid Wood Machining Forum (1/10) -- A suggestion for the WoodWeb staff. I read your articles almost daily when startin ...

    Re: A Suggestion For The Woodweb
    A message posted at WOODWEB's Solid Wood Machining Forum (1/10) -- thumbs up! ...

    wilsonart 500 sprayable?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/10) -- can anyone help with how to cut wilsonart art 500 contact cement for a s ...

    Re: 6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9/25) -- Hi Dustin, No Jambs, however I was doing some tests this afternoon and can hear ...

    6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9/25) -- Hi everyone! Hoping you can help! I’ve been working with a wadkin 6 head moulde ...

    6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9/25) -- Hi everyone! Hoping you can help! I’ve been working with a wadkin 6 head moulde ...

    Re: 6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9/25) -- Yes on checking the belts but I would pull them off and free spin the spindles. ...

    Re: 6 head moulder - big ripples
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9/25) -- Looks very evenly spaced about every inch or so? Need to check the spindle bear ...

    Bench grinder bristle wheels for wood (not steel)
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9/24) -- Hi, I am making a run of frame saw handles that are almost 20" long with r ...

    Air Compressor Troubleshooting
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9/22) -- Air pressure drops to near zero psi as soon as a tool is triggered. It's a big ...

    Re: RE: Wood Slab Surfacing Machines
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9/22) -- Easy solution to that, find a local wholesaler, and have them order it in. The ...

    Rip fence modification
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9) -- Hello, I recently purchased a Felder k 700 panel saw 2007 and the rip fence was da ...

    Re: Building a gang rip saw up-to 15 blades
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9) -- A 12" Mereen Johnson has a 3 1/8" arbor w/ a 50hp direct drive motor. A ...

    Re: Building a gang rip saw up-to 15 blades
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9) -- Just here stop jump on the "this is a terrible idea" bandwagon. ...

    Re: crack repair
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/9) -- A screw clamp. This is our first go round with thermoformed edges. The f ...

    Re: Question: Laminating thick boards
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/9) -- If you were to use an epoxy adhesive it will be able to fill the void of ...

    Re: crack repair
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/9) -- Rout it out an put in a new piece. What are you clamping with that would ...

    Re: dado cutting tapers
    A message posted at WOODWEB's Solid Wood Machining Forum (12/9) -- I'd make the pattern a couple of inches longer than your part. Index it down the c ...

    Gearbox lube for widebelt
    A message posted at WOODWEB's Solid Wood Machining Forum (11/9/23) -- What would be the recommended lubricant for the gearbox of a variable speed wid ...

    Re: Building a new router table vs buying a shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (11/9/23) -- I will add that the shaper Rob posted has stub spindles so one can do copes wit ...

    Re: General 25 " Dual Drum Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (11/9) -- Hi, THanks for your help, the model is 15250-m1 25" dual drum 3hp sander. It ...

    Bandsaw Blades
    A message posted at WOODWEB's Solid Wood Machining Forum (11/9) -- I make big chunky letter on a bandsaw. 3" thick is my most popular product. I ...

    Thick laminate material
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/9) -- I'm bidding a job to copy a model display that has a material on it I ha ...

    Re: BANDSAW BLADES
    A message posted at WOODWEB's Solid Wood Machining Forum (11/9) -- BTW, here is an example of what I do. Thanks again. ...

    Re: wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/9) -- Do a search on "chip beat" on the entire Woodweb site and you will see a ...

    Re: Straight lining
    A message posted at WOODWEB's Solid Wood Machining Forum (11/9) -- I own a helical head jointer and straight line (when needed) long lengths up to 16 ...

    Query on machine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/9/25) -- Weinig Powermat 500. Head no.5 will not release ...

    Powermatic RB37 Sander parts/repair
    A message posted at WOODWEB's Solid Wood Machining Forum (10/9/21) -- Looking for new, replacement or spare parts for RB37. Specifically, the air ope ...

    Home built gang ripsaw plans?
    A message posted at WOODWEB's Solid Wood Machining Forum (10/9) -- Hi all, I need to make or purchase a small gang saw that can rip strips of 1/2&quo ...

    Re: Home built gang ripsaw plans?
    A message posted at WOODWEB's Solid Wood Machining Forum (10/9) -- Finding a used Woodmaster would be a much better alternative to building from scra ...

    Re: Grizzly 24" Drum sander
    A message posted at WOODWEB's Solid Wood Machining Forum (10/9) -- My first thought would be a bearing. ...

    beveled edge in laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/9) -- Have been looking for a dedicated machine to make lots of bevelled Edge ...

    Re: Planeing angled 6x6 post caps with PT yellow pine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/9) -- You'll get some blowout with the cross grain run in the planer. You'll also get so ...

    Re: Planeing angled 6x6 post caps with PT yellow pine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/9) -- I've done those with a table saw and it is kind of scary. If I had to do it again ...

    Re: Planeing angled 6x6 post caps with PT yellow pine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/9) -- Band saw and edge sander sounds good. Might try that ...

    Re: Wood slab install ?s
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/9) -- have you look at this. by Integra adhesive Substrate Bonder SB100 is ...

    Band Saw Guide Bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (10/9) -- I have a Powermatic band saw model 2415 and am looking for after market guide bear ...

    Re: Gluepot cleaning / repair
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/9/25) -- I’ve heard good feedback about third-party rebuilds like Metride. As l ...

    Jointer Setup
    A message posted at WOODWEB's Solid Wood Machining Forum (9/9/21) -- Hello All, I'm hoping to get some tips about setting up my jointer. Blades have ...

    Re: Freud FTE2000 Router
    A message posted at WOODWEB's Solid Wood Machining Forum (9/9) -- I consider that a poor choice for a commercial shop. No idea if you can hack the el ...

    Re: Freud FTE2000 Router
    A message posted at WOODWEB's Solid Wood Machining Forum (9/9) -- It limits the diameter/weight of the bit. You can't run a big bit at full speed in ...

    Straight line rip saw personal safety solutions
    A message posted at WOODWEB's Solid Wood Machining Forum (9/9) -- I'm looking for some information regarding the safety practices/PPE (personal prote ...

    Shims on Newman Whitney Planer
    A message posted at WOODWEB's Solid Wood Machining Forum (9/9) -- I have a 24" Newman Whitney planer with the "old style" adjustment s ...

    Re: What brand shaper cutter do I have
    A message posted at WOODWEB's Solid Wood Machining Forum (9/9) -- I recognize the numbering system Superb tooling 812.367.2102 But probably made by D ...

    Re: Groovers o.k. for tenoning?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/9) -- We came up with a slick method for tenons and very accurate grooving a couple of de ...

    Delta table saw parts
    A message posted at WOODWEB's Solid Wood Machining Forum (8/9) -- Hello guys We have a Delta 36-789 (RT40) 14" table saw. Its only 8 years old a ...

    Re: Delta table saw parts
    A message posted at WOODWEB's Solid Wood Machining Forum (8/9) -- If I had that problem I would call Marsh Powertools in Livonia MI. They might not h ...

    Re: Should I add a brush sander to the back of my wide belt sander?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/9) -- Might not translate but our segmented platen sander is a finish sander. We are sand ...

    Re: Panel glue up options
    A message posted at WOODWEB's Solid Wood Machining Forum (7/9) -- Thank you all - based on this thread, found a bigger outfit that has the equipment ...

    RE: Grit of wood using a Planer
    A message posted at WOODWEB's Solid Wood Machining Forum (7/9) -- Can a piece of wood, whether it be red oak or gum, be tested for smoothness coming ...

    Helma Dual head Spindle shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (7/9) -- Looking for anyone who has experience on this machine and or manual thanks can also ...

    Re: Making Rounded Coffin Top
    A message posted at WOODWEB's Solid Wood Machining Forum (7/9) -- Hi Mr David , . Pieces can be beveled on my joiner to make the proper radius. I am ...

    Re: Making Rounded Coffin Top
    A message posted at WOODWEB's Solid Wood Machining Forum (7/9) -- With a jig and a large band saw, you could make the cuts pretty well. The saw is ju ...

    Re: wilsonart laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/9) -- I think it has always been that way. It is a good idea to buy sheets that ...

    Re: Rip saws
    A message posted at WOODWEB's Solid Wood Machining Forum (7/9) -- I once had a shop that had a straight line saw for making good blanks for the molde ...

    Weinig Molder
    A message posted at WOODWEB's Solid Wood Machining Forum (7/9) -- We have a P26 Weinig Molder. Does anyone know where we can get a replacement motors ...

    Re: RELAMINATING TELLER COUNTERS ON SITE
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/9/22) -- T and M contract signed off daily. There is too much good work out the ...

    Re: Painted Kitchen Cabinet Doors
    A message posted at WOODWEB's Cabinetmaking Forum (6/9) -- I am preparing to do a job like this. Full kitchen with flat slab doors. Thus far, I have ...

    CV and 3D mouse??
    A message posted at WOODWEB's CAD Forum (6/9) -- Hello all. Has anybody used one of the 3Dconnexion mice with Cabinet Vision? I run Solid 8. Seems li ...

    Re: Carbide knives chipping while grinding.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/9) -- Thanks for the suggestion Russ! I will give it a try. It would make sense that it w ...

    Re: Carbide knives chipping while grinding.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/9) -- What type of carbide are you grinding inlaid or double back? If your are grinding i ...

    Carbide knives chipping while grinding.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/9) -- Hello all! The issue I'm having is, while sharpening carbide knives I'm getting chi ...

    Re: Carbide knives chipping while grinding.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/9) -- That would make sense, I would tend to bet the spot you're talking about is a pinch ...

    Re: laminate substrates
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/9) -- Bet your "high end modular furniture line " won't have the budg ...

    undermoutsink on SS
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/9) -- Im doing my first undermount sink (not integrated) wondering if its more ...

    Re: Weinig Profimat 23 Moulder - Material drifts off fence
    A message posted at WOODWEB's Solid Wood Machining Forum (5/9/25) -- The casting upright part that holds the feed beam and mates with the back of the ...

    Re: Water cooled spindle in router table?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/9/24) -- Yes Trueframe, and lemonade is the process of mixing lemon juice, water, and sug ...

    Re: 5 Piece doormaking techniques
    A message posted at WOODWEB's Cabinetmaking Forum (5/9/22) -- I have to be honest, I have had 95% success in not cracking 5-piece doors and the frame ...

    Re: Solid wood nesting tooling
    A message posted at WOODWEB's CNC Forum (5/9/22) -- When cutting wood or composite wood materials, the damage of welded carbide milling cutters is of ...

    Re: Wide belt sander drum repair
    A message posted at WOODWEB's Solid Wood Machining Forum (5/9) -- Hello James, if there are some imperfections on the drum and you simply want to dre ...

    Re: Wide belt sander drum repair
    A message posted at WOODWEB's Solid Wood Machining Forum (5/9) -- Thank you for the tips guys!! Yes, mill the surface straight is what we were lookin ...

    Re: Wide belt sander drum repair
    A message posted at WOODWEB's Solid Wood Machining Forum (5/9) -- If by resurface you mean mill the surface straight and clean then I'd suggest calli ...

    Re: 12" table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/9) -- We resaw on the table saw, flipping the board over you can resaw almost an 8” board ...

    Re: 12" table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/9) -- Just curious what are you going to do with a 12" cabinet saw? We only use saws ...

    Re: 12" table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/9) -- Bigger Bandsaw? Much safer than the way you are doing it ...

    Re: Laminate edge
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/9) -- Track saw? How the heck would that work? Miter fold on the face, then san ...

    Re: high gloss white laminate with matching edgebanding - glue questions
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/9) -- which clear contact cement do you use? ...

    Re: Laminate edge
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/9) -- Thanks, I have seen those strips online but my supplier doesnt have them. ...

    Re: Plastic bottom bags for DC
    A message posted at WOODWEB's Solid Wood Machining Forum (5/9) -- I use 3mill thickness bags. Sometimes I buy clear ones from U-Line and some times I ...

    Re: Running small mouldings on a wadkin k23
    A message posted at WOODWEB's Solid Wood Machining Forum (4/9/24) -- On short runs I do this all on the shaper against an outboard fence. Sometimes I ...

    Re: What does your shop use for crosscutting face frame stock?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/9/23) -- Upcut saw and digital stop with cut list fed digitally to the fence. ...

    Re: Ironwood planer reviews
    A message posted at WOODWEB's Solid Wood Machining Forum (4/9/22) -- We have one and I have been meaning to take down the info on it to share with yo ...

    Re: Ironwood planer reviews
    A message posted at WOODWEB's Solid Wood Machining Forum (4/9/22) -- I'd never heard of them so did a little looking. Found that they are made in Tai ...

    Re: best way to move powermat 700 into place from the crate
    A message posted at WOODWEB's Solid Wood Machining Forum (4/9) -- I agree on the rigger. I think that is 9-11,000 pounds. The material that came with ...

    Re: Another safety/jig/sketchy cut question
    A message posted at WOODWEB's Solid Wood Machining Forum (4/9) -- "The only thing that can ever be lose is the part you are cutting." Wait ...

    RE: Orbital Shop Sanders
    A message posted at WOODWEB's Solid Wood Machining Forum (4/9) -- What is the widest width orbital shop sander that could be purchased, air or electr ...

    Re: Maple veneer cross grain seam--best way to hide it?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/9) -- Hah!--total belly flop. Thing will go out with ugly a$$ seam. Sad Melly. ...

    Re: Topped out
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9/24) -- Look how far you have come on your own. Now imagine how far you could go with so ...

    Re: Topped out
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9/24) -- Weinig may still send techs out to your shop to teach you what you need. Call th ...

    Re: Looking For A Finishing Consult
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/9/24) -- Gemini Coatings in Grand Prarie, TX ...

    Re: Spindle running hot new bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9/23) -- Hi Dave, I the classes I took like 20 years ago we got told not to use sealed Be ...

    Re: Spindle running hot new bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9/23) -- Thanks Fred. From your explanation i probably did not do any of those things cor ...

    Re: Source for prelaminated panels with realistic faux walnut?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/9/23) -- Thanks Daniel, I will check them out. ...

    Re: Source for prelaminated panels with realistic faux walnut?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/9/23) -- Find your closest EGGER dealer ...

    Re: Questions about New Thickness Planer Options
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- Kinda boils down to how good of a thickness sander you have. If you go with steel, ...

    Re: Questions about New Thickness Planer Options
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- I would get segmented steel infeed rollers, rubber out feed. I would also get a car ...

    Re: Questions about New Thickness Planer Options
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- Bill thats what im leaning toward and have on my current spec sheet. segmented stee ...

    Re: Questions about New Thickness Planer Options
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- In my experience the steel outfeed rollers leave more road rash than rubber, especi ...

    Re: Questions about New Thickness Planer Options
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- I know it wasn't your question but have you considered running your stiles&rail ...

    Re: Questions about New Thickness Planer Options
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- I have but first i would like a better planer for other shop duties as well ...

    Re: 4 head 226 Mattison moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- Hi Dave, looks like you need somebody that has worked a lot on old mill planers and ...

    4 head 226 Mattison moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- Seeking a user manual and parts manual for a 226 Mattison 4 head moulder with tilti ...

    formica idealedge bullones
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/9) -- Why in the world would Formica make a bullnose Edge for countertops that ...

    Re: Sunhill shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- If you have a removable router collet post a pic some we can see the taper. You may ...

    Re: RE: Oliver Jointer Repair
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- Thank you for your information. Sorry, I was away for a few weeks, so I could not r ...

    Re: thin kerf sawblades
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- Amen to super thin saws. Excellent blades. ...

    Re: Felder saw blades
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- They are the Best Blades I have used. I've got Ghudo, Tenru, freud, olson and other ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- On my sliding table saw: I drilled a hole in a 36" Sthil chain saw bar. Mounte ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- At christmas time we used to get turkeys or hams. One of the guys hauled his frozen ...

    Re: Safety Speed 37" wide belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (3/9) -- Don't know about the Grizzly or Safety Speed Cut but we have a similar machine made ...

    Re: countertop core
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/9) -- Thank you Dave. I'll look that up just to see what it is. We use IPB core ...

    Re: Snipe on widebelt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (2/9/25) -- Measure from the center of the snipe to the end of the panel. Then, find out on ...

    Re: Conditioner For Wide Belt Conveyer Belt?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/9/24) -- Is the conveyer belt taller than the splice? If so the sanding belt won't touch ...

    Re: Conditioner For Wide Belt Conveyer Belt?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/9/24) -- Thanks again for the responses. Gary, with my belt having metal staples, would I ...

    Re: Conditioner For Wide Belt Conveyer Belt?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/9/24) -- It's close... I'm not sure if I feel confident enough to risk running it through ...

    Re: Pre-bending HPL and hold the shape?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/9) -- I own a countertop shop along with our cabinet shop. Our top shop gets a ...

    Re: 72'' or longer straight metal bar
    A message posted at WOODWEB's Solid Wood Machining Forum (2/9) -- McMaster Carr has a good selection. I needed a long straight edge not long ago, and ...

    Moulder Operator/Grinderman pay rates across the country?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/9) -- Hello all! I was just wondering if we could get some hourly rates from different pa ...

    Re: CNC machining chair bottoms
    A message posted at WOODWEB's Solid Wood Machining Forum (2/9) -- I make and ship scooped seats I carve on my CNC. Other than one customer, I've alwa ...

    Re: Tool grinder
    A message posted at WOODWEB's Solid Wood Machining Forum (2/9) -- Here is a great web site to start on. https://www.weinigusa.com/us/ Be careful when ...

    Re: Interior Door Panels
    A message posted at WOODWEB's Architectural Woodworking Forum (2/9) -- Solid wood moves, and no two pieces the same. It could be the original panels ...

    Re: Tersa cutter head
    A message posted at WOODWEB's Solid Wood Machining Forum (2/9) -- Thanks everyone for the responses. Thanks Chris, i have had similar experience of l ...

    Re: Weinig powermat 1200
    A message posted at WOODWEB's Solid Wood Machining Forum (1/9/25) -- Thank you for the response. I did remove and clean under the bed plates and did ...

    Spraying Solid Wood Raised Panels
    A message posted at WOODWEB's Finishing Forum (1/9/24) -- I haven’t done a lot of these but the ones I have, as the panel shrinks sometimes it reveal ...

    Re: Kupfer Muhle Planer
    A message posted at WOODWEB's Solid Wood Machining Forum (1/9/24) -- I bought a Pinhiero 4 head planer at one shop. A Spanish machine imported by som ...

    Re: Kupfer Muhle Planer
    A message posted at WOODWEB's Solid Wood Machining Forum (1/9/24) -- The Pinhiero is a similar looking machine. The Kuper also appears as if the side ...

    Re: Spraying Solid Wood Raised Panels
    A message posted at WOODWEB's Finishing Forum (1/9/24) -- I always stain the panels first, spray a coat of sealer, sand the sealer then install them ...

    Re: Spraying Solid Wood Raised Panels
    A message posted at WOODWEB's Finishing Forum (1/9/24) -- I stain or (color) prime the tongues of the panels before assembly. Then clear or prime/pai ...

    Re: Advice on Planer Purchase
    A message posted at WOODWEB's Solid Wood Machining Forum (1/9/23) -- I agree with Dave E. - Get a four head planer with digital readouts, process (co ...

    Re: Edgebander: Premill vs Edging on the Shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (1/9/23) -- Pulled the trigger on a new Cantek MX350m this morning. Not a huge machine, but ...

    Re: thermoforming
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/9) -- Leonard, we use membrane on ours. Shameless plug.. Could save you time an ...

    festool laminate trimmer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/9) -- I am thinking about buying the festool mfk700 for trimming hpl. I have re ...

    Re: Cnc flat table spoilboard and pods
    A message posted at WOODWEB's CNC Forum (1/9) -- Solid surface pods sitting on bleeder board is enough to hold parts ...

    Re: First cut on a straight line rip
    A message posted at WOODWEB's Solid Wood Machining Forum (1/9) -- When you float the pc using the laser on the wood you are going for a straight edge ...

    Re: First cut on a straight line rip
    A message posted at WOODWEB's Solid Wood Machining Forum (1/9) -- Thanks, Bill. Besides the T&G, we mostly cut old rough sawn lumber (2x and 3x) ...

    Re: First cut on a straight line rip
    A message posted at WOODWEB's Solid Wood Machining Forum (1/9) -- You are not cutting rough lumber so that could work. Rough lumber has defects on th ...

    Re: Hook angle for hardwoods - Weinig 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (1/9) -- The short answer, particularly for the species you list is 20º. See Russ's article ...

    Re: Laminate Adhesives?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/9) -- Hey Mike, I don't use water based contact, but I do know the two large po ...

    Re: Laminate Adhesives?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/9) -- Had not thought about PF supplier, will try that. Actually interested in ...

    Re: Counter sunk
    A message posted at WOODWEB's Solid Wood Machining Forum (1/9) -- Stefano Pocket -hole machine I attached a link below to a manufacturer but I am sur ...

    Re: Steel City 15" belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (1/9) -- This is a drum sander. Your title of belt sander had me excited as I am looking aro ...

    Re: Counter sunk
    A message posted at WOODWEB's Solid Wood Machining Forum (1/9) -- Looks like a router cut prolly a Castle machine as they do not use a regular drill ...

    Re: Counter sunk
    A message posted at WOODWEB's Solid Wood Machining Forum (1/9) -- that type of pocket hole looks to be cut by a castle machine. Same concept as a kre ...

    Re: Scraps
    A message posted at WOODWEB's Solid Wood Machining Forum (1/9) -- Maybe make some into bead molding used on applied molding doors and such . ...

    Re: sloppy cope and stick joinery
    A message posted at WOODWEB's Solid Wood Machining Forum (1/9) -- First thing I check is that the knives are in alignment with each other. When you d ...

    Re: Building a gang rip saw up-to 15 blades
    A message posted at WOODWEB's Solid Wood Machining Forum (12/8) -- A 40mm x 8' arbor will sag under it's own weight. Let alone handle blades under th ...

    Re: Solid wood drawers
    A message posted at WOODWEB's Cabinetmaking Forum (12/8) -- I get my drawers from Hardware Resource my only gripe with them is they use very little g ...

    Re: Oliver 4920 SLR
    A message posted at WOODWEB's Solid Wood Machining Forum (12/8) -- I have the Oliver 4910 that is the little brother to the 4920. Basically the same ...

    Re: How Is This Door Made?
    A message posted at WOODWEB's Architectural Woodworking Forum (12/8) -- I recall that of several solutions offered by Tage Frid re solid-door constru ...

    Re: Variety of Joints
    A message posted at WOODWEB's Architectural Woodworking Forum (12/8) -- I agree - The Maka is a great machine. Lari & Lari is imported by Solidwo ...

    Re: dado cutting tapers
    A message posted at WOODWEB's Solid Wood Machining Forum (12/8) -- Bruce H. thanks for your input. Your idea sounds intriguing but I'm having a hard ...

    Re: Is there a "splitting" analogy to Janka hardness?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/8/22) -- I would be very surprised if compressibility of a particular species did not va ...

    Re: Machining brass and wood
    A message posted at WOODWEB's Solid Wood Machining Forum (11/8) -- When working with non-ferrous metals like brass and Aluminum and, you need a CNC m ...

    Re: Pro scale / widebelt
    A message posted at WOODWEB's Solid Wood Machining Forum (11/8) -- It is the readhead that is telling the readout what to say, so it needs to be as c ...

    Looking For Technical Help With A Newman-Whitney Gang Ripsaw
    A message posted at WOODWEB's Solid Wood Machining Forum (11/8) -- Hi, I have a Newman-Whitney KF-24 24" gang ripsaw. I am having problems with ...

    Re: Matching V-belts
    A message posted at WOODWEB's Solid Wood Machining Forum (11/8) -- From "Browning Belt Drive Monthly" at: http://www.regalpts.com/PowerTran ...

    Re: Feed roller settings
    A message posted at WOODWEB's Solid Wood Machining Forum (11/8) -- If it's the really old S-520 like mine, the outfeed roller is spring loaded, so no ...

    Feed roller settings
    A message posted at WOODWEB's Solid Wood Machining Forum (11/8) -- I am having some feed problems on an older scmi s520. Can anyone tell me what heig ...

    Re: Matching V-belts
    A message posted at WOODWEB's Solid Wood Machining Forum (11/8) -- McMaster carries matched belts. They don't have an A21. I would call and ask. Moti ...

    wood chip denting
    A message posted at WOODWEB's Solid Wood Machining Forum (11/8) -- ok. I have been experiencing some wood chip denting on s4s and some profiles in al ...

    Re: Wadkin planer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/8) -- I believe you have a BTJ built in 1970 by Bursgreen in their Fence Houses factory. ...

    Buss # 4 Planer 30"
    A message posted at WOODWEB's Solid Wood Machining Forum (11/8) -- I have a Buss no.4 planer 30" that I would like to sell. It worked well when ...

    Re: Buss # 4 Planer 30"
    A message posted at WOODWEB's Solid Wood Machining Forum (11/8) -- Jack - we can't help with the value of your machine, but we do have an area where ...

    Re: cutter for a derda carval dovetailer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/8) -- Try these people, I have used their products in the past with no issues, reasonabl ...

    Re: cutter for a derda carval dovetailer
    A message posted at WOODWEB's Solid Wood Machining Forum (11/8) -- Is this the bit you are looking for? Give us a call and we will be happy to help. ...

    Re: Looking For A Finishing Consult
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/8/24) -- I’d suggest hitting up local furniture stores or home improvement cen ...

    Re: Machinery parts for discontinued machines
    A message posted at WOODWEB's Solid Wood Machining Forum (10/8/21) -- Tough with Asian machines, made to throw away, not service or rebuild..... Try ...

    spindle nut
    A message posted at WOODWEB's Solid Wood Machining Forum (10/8/21) -- looking for spindle nut and washer for a sac sueri ts145 standard 1 1/4 spindle ...

    Grizzly 24" Drum sander
    A message posted at WOODWEB's Solid Wood Machining Forum (10/8) -- I am working on a used Grizzly 24" drum sander that is making a very loud har ...

    Re: Machining contour elevation paths on a CNC router
    A message posted at WOODWEB's CNC Forum (10/8) -- I am using Solidwoks to create the 3D file, and Enroute6 to create the tool paths. Here is a small ...

    Fire retardant wood and machining
    A message posted at WOODWEB's Solid Wood Machining Forum (10/8) -- Have a customer requesting a tongue and groove product with a fire retardant ratin ...

    Planeing angled 6x6 post caps with PT yellow pine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/8) -- Thinking about making deck post caps. Looks like a pyramid (but only a slight rise ...

    Re: Planeing angled 6x6 post caps with PT yellow pine
    A message posted at WOODWEB's Solid Wood Machining Forum (10/8) -- A raised panel cutter on a sharper. Perley ...

    Manual for Rondamat 925
    A message posted at WOODWEB's Solid Wood Machining Forum (10/8) -- I am buying a used Weinig Rondamat 925 to cut knives for an old Weinig molder. Doe ...

    Re: Repairing chipped laminate cabinet faces
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/8) -- NO don't do this to yourself. You are not going to do anything with seam ...

    Re: Repairing chipped laminate cabinet faces
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/8) -- A good point, but I'm not sure I can match the laminate color properly w ...

    Re: Single flute router bit uses?
    A message posted at WOODWEB's CNC Forum (9/8) -- Jack, Yes kind of. the issue is the smaller diameters are hard to make in carbide tipped. Once you g ...

    Re: Solid surface couter edge
    A message posted at WOODWEB's Adhesives Forum (9/8) -- Thanks Dave, ...

    Re: The solidworks thread
    A message posted at WOODWEB's CAD Forum (9/8) -- We have drftsman that use Autocad for "paper" drawing. Myself and another guy use Masterca ...

    What brand shaper cutter do I have
    A message posted at WOODWEB's Solid Wood Machining Forum (9/8) -- I purchased a used three used weaver shapers to add to my custom door shop and i I ...

    Moisture Meter Setting
    A message posted at WOODWEB's Solid Wood Machining Forum (9/8) -- I use a Ligno pinless moisture meter. There are two depth settings, 1/4" and 3 ...

    Re: What brand shaper cutter do I have
    A message posted at WOODWEB's Solid Wood Machining Forum (9/8) -- Thanks, i don't know why but i couldn't come up with anything on a google search. ...

    Re: What brand shaper cutter do I have
    A message posted at WOODWEB's Solid Wood Machining Forum (9/8) -- I would guess Superb, since that's what is etched on the inserts... ...

    Re: Groovers o.k. for tenoning?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/8) -- Hey Joe thanks again. I have a 10hp SCM T130nps that I am slowly getting together t ...

    Re: Groovers o.k. for tenoning?
    A message posted at WOODWEB's Solid Wood Machining Forum (9/8) -- Hi Correy The T 130 should work fine for this with a sliding table. An inexpensive ...

    Re: Hot press clamping time I need advice
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/8) -- If this is an ongoing production project then you may want to do some tes ...

    Re: RE: Grit of wood using a Planer
    A message posted at WOODWEB's Solid Wood Machining Forum (8/8) -- In case you didn't read the answers last time. ...

    Re: RE: Grit of wood using a Planer
    A message posted at WOODWEB's Solid Wood Machining Forum (8/8) -- I bet Norm Grimberg has the answer... ...

    Re: Should I add a brush sander to the back of my wide belt sander?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/8) -- A wide belt is not a finishing sander, and I don't try to treat it like one. A brus ...

    Re: Should I add a brush sander to the back of my wide belt sander?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/8) -- Get with your abrasive person. I would think you could get a finish that would be a ...

    Re: Should I add a brush sander to the back of my wide belt sander?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/8) -- We still use our stroke sander! Great for curved/concave work too. Have you thought ...

    Re: Should I add a brush sander to the back of my wide belt sander?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/8) -- You can see the long scratches in areas where the grain curves. Do people recommend ...

    Re: Should I add a brush sander to the back of my wide belt sander?
    A message posted at WOODWEB's Solid Wood Machining Forum (8/8) -- I don't think the brush would help. Why do you need to use an orbital sander after ...

    moulder parts
    A message posted at WOODWEB's Solid Wood Machining Forum (8/8) -- I have a powermatic moulder with a two knife head, i cannot find the gibs that hold ...

    Re: Solid table tops
    A message posted at WOODWEB's Furniture Making Forum (8/8) -- Red oak or white oak? How wide? What was the wood moisture level when you started? Boug ...

    flattening laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/8) -- I've got some phenolic backed veneer which came rolled up in a box. Is th ...

    Re: flattening laminate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/8) -- Roll it back up the other way and toss a couple spring clamps on it and l ...

    Re: Mdf rail coped to hardwood
    A message posted at WOODWEB's Cabinetmaking Forum (7/8) -- The other problem we had when we tried running MDF into Solids was the issue of sanding at ...

    Re: Making Rounded Coffin Top
    A message posted at WOODWEB's Solid Wood Machining Forum (7/8) -- https://www.youtube.com/watch?v HGbVbsSfBSY ...

    Re: End matching and crosscutting flooring from molder
    A message posted at WOODWEB's Solid Wood Machining Forum (7/8) -- Plan on going to Atlanta this August for the IWF Machinery fair. Anyone making any ...

    Re: End matching and crosscutting flooring from molder
    A message posted at WOODWEB's Solid Wood Machining Forum (7/8) -- Dave, I do expect to attend IWF, just trying to get as much of a baseline of non sa ...

    Help identify high precision spindle bearings
    A message posted at WOODWEB's Solid Wood Machining Forum (7/8) -- 7913ctrdulp4y 7210ctrdulp4y Nsk bearings What weinig moulders are these compatible ...

    General 220 Hollow Chisel Mortiser with pneumatic feed
    A message posted at WOODWEB's Solid Wood Machining Forum (7/8) -- Hi: I am wondering if anyone here has come across one of these rare beasts on their ...

    Re: Veneering Solid Wood
    A message posted at WOODWEB's Veneer Forum (6/8/23) -- Yes that is my theory. When you epoxy the face veneer it becomes a moisture barrier so the oth ...

    Re: Veneering Solid Wood
    A message posted at WOODWEB's Veneer Forum (6/8/23) -- Thanks for your input Tom. Makes sense on the veneer thickness and the other points you mentio ...

    Re: Veneering Solid Wood
    A message posted at WOODWEB's Veneer Forum (6/8/23) -- Tom, Let me see if I understand you. My plan was to use an oil based hard wax, Odie's oil, fin ...

    Re: Veneering Solid Wood
    A message posted at WOODWEB's Veneer Forum (6/8/23) -- One last thing. If you are going to use epoxy for the veneer I suggest you coat the back with ...

    Re: Bridgewood 708 moulder/planer
    A message posted at WOODWEB's Solid Wood Machining Forum (6/8) -- Jimb: The thing about smaller machinery is that very often, different brand names a ...

    Lauderdale-Hamilton 40 HP Gang Rip Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (6/8) -- Hey all, I just bought a Lauderdale-Hamilton 40 HP Gang Rip Panel Saw, and I was wo ...

    Re: Scalloped drawer fronts
    A message posted at WOODWEB's Solid Wood Machining Forum (6/8) -- I have a 5 axis cnc and could make these as I have made them before. Send me a roug ...

    color core laminate & edging
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/8) -- For you guys that are familiar with color core laminate (formica brand or ...

    Telegraphing through HPL
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/8) -- We are a company that specializes in building large boardroom tables. We ...

    Re: Water cooled spindle in router table?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/8/24) -- I wish Woodweb would filter out these inane AI responses... ...

    Panel Saw
    A message posted at WOODWEB's Solid Wood Machining Forum (5/8) -- We are looking for a used panel saw. I have narrowed it down to a few. Found a 1999 ...

    Re: Longitudinal lines on wood caused by wide belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (5/8) -- Yes, longitudinal would mean running along the length of the board, not across the ...

    Re: 12" table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/8) -- Yes, a Powermaric 68 or Rockwell would work but they don’t have riving knives. I wo ...

    Re: 12" table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/8) -- Both Rockwell and Powermatic made 12" cabinet saws. The Rockwell 12/14 and Pow ...

    12" table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/8) -- Looking for a 12" table saw (not a panel saw) with riving knife that is Americ ...

    Re: Longitudinal lines on wood caused by wide belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (5/8) -- Well since Luis hasn't responded, I guess it really doesn't matter or wasn't that i ...

    Re: 12" table saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/8) -- Try Laguna. Not sure where they are made used to be Europe. ...

    Re: high gloss white laminate with matching edgebanding - glue questions
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/8) -- thanks alan, i discovered that recently as well about the laser edging, b ...

    Re: high gloss white laminate with matching edgebanding - glue questions
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/8) -- we use clear contact cement for jobs that we can't run through the edgeba ...

    Re: high gloss white laminate with matching edgebanding - glue questions
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/8) -- Antonio, The kitchens people are seeing using this material are being edg ...

    Re: Walnut cupping after glue up.
    A message posted at WOODWEB's Solid Wood Machining Forum (5/8) -- Also, try to remove the same amount of material from both faces. Wood MC changes fa ...

    Re: Laminate edge
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/8) -- We buy that for our counter top shop in sticks from Lewis and Co, or Wurt ...

    Re: white contact cement
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/8) -- I do not know how much edging is require. But, I know folks have had grea ...

    Re: Where to find manuals for older machines?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/8) -- Hi Mel: You can try Old Woodworking Machinery forum. Here's the web page: http://ww ...

    Re: substrate glues
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/8) -- Glad you posted, we use a lot of steel with our Corain, and if it's cold ...

    Re: white contact cement
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/8) -- We use TAC or Stayput clear in the 37# cannister. You can get Helmetin, T ...

    Re: Fixing Panel Cracks
    A message posted at WOODWEB's Architectural Woodworking Forum (4/8/24) -- Two thin raises over a foam board is not sound. Make your panels "soli ...

    What does your shop use for crosscutting face frame stock?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/8/23) -- Looking to upgrading my cross cutting for face frame stock . 99% of what I cut i ...

    Re: What does your shop use for crosscutting face frame stock?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/8/23) -- When I was building cabinets, I set up a 16" jump saw with a custom build f ...

    Re: What does your shop use for crosscutting face frame stock?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/8/23) -- We use a sliding panel saw. Not the best due to speed but its a nice cut. An upc ...

    Re: Reference engraver on a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/8) -- The rebate cutter and associated fence in theory act as a jointer to provide a stra ...

    Re: 72'' or longer straight metal bar
    A message posted at WOODWEB's Solid Wood Machining Forum (4/8) -- I've yet to find a situation where two of the pieces we've just straightened/flatte ...

    Re: Reference engraver on a moulder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/8) -- Whoops, I see Russ already posted the link. ...

    best way to move powermat 700 into place from the crate
    A message posted at WOODWEB's Solid Wood Machining Forum (4/8) -- Any of you guys uncrated a powermat 7000? I have the front off, but can't really se ...

    Re: best way to move powermat 700 into place from the crate
    A message posted at WOODWEB's Solid Wood Machining Forum (4/8) -- Hire a rigger ! ...

    Re: Maple matchbook butcher block issues
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/8) -- You have constructed a fine example of what not to do with wood. You may ...

    3mm Hardwood Veneer on 1-1/4" substrate
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/8) -- We have a 1 off job too veneer 3mm hardwood veneer to both sides of a 1-1 ...

    Re: Maple matchbook butcher block issues
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/8) -- Yup, you created the poster child for cross grain construction education. ...

    Re: Binks 2001 gun for contact cement
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/8) -- Most solvent based contacts take fluid tip 63bss and the its correspondin ...

    Re: Hot press info
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/8) -- Would also be pressing with a PVA glue. parts usually 5" wide ...

    Re: WIDE BELT SANDER INFO
    A message posted at WOODWEB's Solid Wood Machining Forum (4/8) -- Rick, Take a hard look at Biesse. I just bought a S211 SW 2 head machine from them ...

      ---   Return to Top   ---   View More Results   


    Machinery Exchange Results:

    Northtech Model NT-400EL Double Surface Planer Listing #555338 Listed on: 03/23 ...
    Northtech Model NT-400EL Double Surface Planer : WOODWEB's Machinery Exchange

    Dantherm Model NFK-2000 4+1 20,000 CFM Dust Collection System Listing #555340 Listed on: 03/23 ...
    Dantherm Model NFK-2000 4+1 20,000 CFM Dust Collection System : WOODWEB's Machinery Exchange

    Northtech Model NT-400EL Double Surface Planer Listing #554996 Listed on: 02/23 ...
    Northtech Model NT-400EL Double Surface Planer : WOODWEB's Machinery Exchange

    Komo VR 508 Cnc Router Listing #555016 Listed on: 02/23 ...
    Komo VR 508 Cnc Router : WOODWEB's Machinery Exchange

    Cehisa PRO-12 CONCEPT Edgebander Listing #554656 Listed on: 01/23 ...
    Cehisa PRO-12 CONCEPT Edgebander : WOODWEB's Machinery Exchange

    Legacy Maverick 96 4x8 CNC Router Listing #554655 Listed on: 01/23 ...
    Legacy Maverick 96 4x8 CNC Router : WOODWEB's Machinery Exchange

    Univeral Sliding table shaper - tenoner attachement Listing #554975 Listed on: 02/20 ...
    Univeral Sliding table shaper - tenoner attachement : WOODWEB's Machinery Exchange

    Ayen OSB23 Line Boring Listing #555306 Listed on: 03/20 ...
    Ayen OSB23 Line Boring : WOODWEB's Machinery Exchange

    Doing tenon / mortise work on a shaper? Try adjustable groovers! Listing #554978 Listed on: 02/20 ...
    Doing tenon / mortise work on a shaper? Try adjustable groovers! : WOODWEB's Machinery Exchange

    1985 Martin T71 sliding panel saw Listing #554979 Listed on: 02/20 ...
    1985 Martin T71 sliding panel saw : WOODWEB's Machinery Exchange

    Northtech Model NT-SLR-14SC Straight Line Rip Saw Listing #554610 Listed on: 01/19 ...
    Northtech Model NT-SLR-14SC Straight Line Rip Saw : WOODWEB's Machinery Exchange

    Rangate versatile Cabinet Set | 6 Interchangeable Profiles available Listing #554959 Listed on: 02/18 ...
    Rangate versatile Cabinet Set | 6 Interchangeable Profiles available : WOODWEB's Machinery Exchange

    Ayen OSB23 Line Boring Listing #554586 Listed on: 01/18 ...
    Ayen OSB23 Line Boring : WOODWEB's Machinery Exchange

    Cehisa PRO-12 CONCEPT Edgebander Listing #555284 Listed on: 03/17 ...
    Cehisa PRO-12 CONCEPT Edgebander : WOODWEB's Machinery Exchange

    Northtech Model NT-SLR-14SC Straight Line Rip Saw Listing #555255 Listed on: 03/16 ...
    Northtech Model NT-SLR-14SC Straight Line Rip Saw : WOODWEB's Machinery Exchange

    Northtech Model NT-SLR-14SC Straight Line Rip Saw Listing #554919 Listed on: 02/16 ...
    Northtech Model NT-SLR-14SC Straight Line Rip Saw : WOODWEB's Machinery Exchange

    Used Sliding Table Saw Listing #555233 Listed on: 03/14 ...
    Used Sliding Table Saw : WOODWEB's Machinery Exchange

    Rangate Stile and Rail Cabinet Set | Ready to Ship Listing #554892 Listed on: 02/11 ...
    Rangate Stile and Rail Cabinet Set | Ready to Ship : WOODWEB's Machinery Exchange

    Dust collection system - Clearvue CV-1800 MAX with all duct and fittings Listing #555052 Listed on: 02/28 ...
    Dust collection system - Clearvue CV-1800 MAX with all duct and fittings : WOODWEB's Machinery Exchange

    Scmi S 630 K Planer Listing #554874 Listed on: 02/09 ...
    Scmi S 630 K Planer : WOODWEB's Machinery Exchange

      ---   Return to Top   ---   View More Results   


    Classified Ads Exchange Results:

    Alpine Workshops | North American Door Workshop 1 SPOT LEFT (Feb. 18-21) Listing #433118 Listed on: 01/22 ...
    Alpine Workshops | North American Door Workshop 1 SPOT LEFT (Feb. 18-21) : WOODWEB's Classified Ads Exchange

    Alpine Workshops | Euro Door / Lift & Slide Door (Feb. 25-28) Listing #433119 Listed on: 01/22 ...
    Alpine Workshops | Euro Door / Lift & Slide Door (Feb. 25-28) : WOODWEB's Classified Ads Exchange

      ---   Return to Top   ---   View More Results